Hi-Res Audio/DNC Headset MDR-NC750

Transcription

1 User guide Hi-Res Audio/DNC Headset MDR-NC750

2 Contents Getting started... 3 Introduction...3 Overview... 3 Learning the basics... 4 Wearing the headset...4 Connecting your headset to your device...4 Digital Noise Cancelling settings in your device... 5 High-Resolution Audio settings in your device... 6 Legal information...7 Declaration of Conformity...8 2

3 Getting started Introduction The MDR-NC750 headset uses Digital Noise Cancelling and High-Resolution Audio technology to deliver crisp digital sound and clear high-quality audio. For details on device compatibility, visit Overview 1 Microphone 2 Earpiece 3 Headset cord 4 Clip 5 Input plug 3

4 Learning the basics Wearing the headset To wear the headset 1 Slide the headset cord securely into the clip. 2 Adjust the length of the headset cord so you can insert the earplugs into your ears. 3 Fasten the clip to your clothes. Connecting your headset to your device To connect your headset to your device Insert the input plug of your headset into the stereo cable connector of your device. 4

5 Digital Noise Cancelling settings in your device Your headset supports Digital Noise Cancelling technology. By using your headset with a compatible device, you can get better audio quality when listening to music in a noisy environment, such as when you are on a bus, a train or on a flight. Digital Noise Cancelling settings are only available on supported Sony Xperia devices. For details on device compatibility, visit To enable the noise cancelling setting in your device 1 Make sure your noise cancelling headset is connected to your device. 2 From your Home screen, tap. 3 Find and tap Settings > Sound & notification > Accessory settings > Noise canceling. 4 Drag the slider beside Noise canceling to the right. 5 If you want Noise canceling to be enabled only during music or video playback or when the screen is active, drag the slider beside Power save mode to the right. 6 If you want Noise canceling to be enabled for as long as the headset is connected, drag the slider beside Power save mode to the left. To select your headset model name in your device 1 Make sure your noise cancelling headset is connected to your device and the noise cancelling setting is enabled. 2 From your Home screen, tap. 3 Find and tap Settings > Sound & notification > Accessory settings > Noise canceling > Headset/Headphone type. 4 In the popup window that appears, select your headset model name. To select the noise environment type in your device 1 Make sure your noise cancelling headset is connected to your device. 2 From your Home screen, tap. 3 Find and tap Settings > Sound & notification > Accessory settings > Noise canceling > Noise environment. 4 Select the relevant noise environment type, then tap OK. 5

6 High-Resolution Audio settings in your device Your headset supports High-Resolution Audio. When used with a compatible device, you can improve the quality of compressed music files to near High-Resolution Audio quality when using the headset. To upgrade the quality of compressed music files 1 From the Home screen, tap. 2 Find and tap Settings > Sound & notification > Audio settings. 3 Drag the slider beside DSEE HX to the right. This setting is only for wired headphones that support High-Resolution Audio. 6

7 Legal information Sony MDR-NC750 Prior to use, please read the Important information leaflet separately provided. This User guide is published by Sony Mobile Communications Inc. or its local affiliated company, without any warranty. Improvements and changes to this User guide necessitated by typographical errors, inaccuracies of current information, or improvements to programs and/or equipment, may be made by Sony Mobile Communications Inc. at any time and without notice. Such changes will, however, be incorporated into new editions of this User guide. All rights reserved Sony Mobile Communications Inc. Sony is the trademark or registered trademark of Sony Corporation. All product and company names mentioned herein are the trademarks or registered trademarks of their respective owners. Any rights not expressly granted herein are reserved. All other trademarks are property of their respective owners. Visit for more information. All illustrations are for illustration only and may not accurately depict the actual accessory. 7

8 Declaration of Conformity We, Sony Mobile Communications AB of Nya Vattentornet SE Lund, Sweden declare under our sole responsibility that our product Sony type AG-0020 and in combination with our accessories, to which this declaration relates is in conformity with the appropriate standards: EMC EN :V1.3.1 following the provisions of, EMC Directive 2004/108/EC. Lund, July 2015 Fredrik Bjork Head of Product Compliance Lund We fulfill the requirements of the EMC Directive (2004/108/EC). FCC Statement This device complies with Part 15 of the FCC rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) This device must accept any interference received, including interference that may cause undesired operation. Any change or modification not expressly approved by Sony may void the user's authority to operate the equipment. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. Consult the dealer or an experienced radio/tv technician for help. Industry Canada Statement This device complies with RSS-210 of Industry Canada. Operation is subject to the following two conditions: (1) this device may not cause interference, and (2) this device must accept any interference, including interference that may cause undesired operation of the device. This Class B digital apparatus complies with Canadian ICES-003. Cet appareil numérique de la classe B est conforme à la norme NMB-003 du Canada. 8