SBL10L25, SBLF10L25, SBLB10L25. Low V F Schottky Barrier Rectifier. Vishay General Semiconductor. FEATURES TYPICAL APPLICATIONS
|
|
- Berenice Nichols
- 7 years ago
- Views:
Transcription
1 SBLL5, SBLFL5, SBLBL5 Low V F Schottky Barrier Rectifier FEATURES TO-0AC ITO-0AC Power pack Guardring for overvoltage protection Low power loss, high efficiency Very low forward voltage drop High forward surge capability SBLL5 PIN CASE SBLFL5 PIN High frequency operation Meets MSL level, per J-STD-00, LF maximum peak of 45 C (for TO-63AB package) Solder bath temperature 75 C maximum, s, per JESD -B6 (for TO-0AC and ITO-0AC package) TO-63AB AEC-Q qualified available - Automotive ordering code: base P/NHE3_A Material categorization: for definitions of compliance please see SBLBL5 PIN HEATSIN TYPICAL APPLICATIONS For use in low voltage, high frequency rectifier of switching mode power supplies, freewheeling diodes, DC/DC converters, and polarity protection application. MECHANICAL DATA PRIMARY CHARACTERISTICS I F(AV) A V RRM 5 V I FSM 40 A V F 0.35 V T J max. 50 C Package TO-0AC, ITO-0AC, TO-63AB Diode variations Single Case: TO-0AC, ITO-0AC, TO-63AB Molding compound meets UL 94 V-0 flammability rating Base P/N-E3 - RoHS-compliant, commercial grade Base P/NHE3 - RoHS-compliant, AEC-Q qualified Base P/NHE3_X - RoHS-compliant, AEC-Q qualified ( _X denotes revision code, e.g. A, B,...) Terminals: matte tin plated leads, solderable per J-STD-00 and JESD -B E3 suffix meets JESD 0 class A whisker test, HE3 suffix meets JESD 0 class whisker test Polarity: as marked Mounting Torque: in-lbs maximum MAXIMUM RATINGS (T C = 5 C unless otherwise noted) PARAMETER SYMBOL VALUE UNIT Maximum repetitive peak reverse voltage V RRM 5 Working peak reverse voltage V RWM 8 V Maximum DC blocking voltage V DC 5 Maximum average forward rectified current at T C = 35 C I F(AV) Peak forward surge current 8.3 ms single half sine-wave superimposed on rated load I FSM 40 A Peak repetitive reverse surge current at t p =.0 μs, khz I RRM.0 Voltage rate of change (rated V R ) dv/dt 000 V/μs Operating junction and storage temperature range T J, T STG -65 to +50 C Isolation voltage (ITO-0AC only) from terminal to heatsink t = min V AC 500 V Revision: 0-Nov-5 Document Number: 8873 ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT
2 SBLL5, SBLFL5, SBLBL5 ELECTRICAL CHARACTERISTICS (T C = 5 C unless otherwise noted) PARAMETER SYMBOL TEST CONDITIONS VALUE UNIT Notes () Pulse test: 300 μs pulse width, % duty cycle () Pulse test: pulse width 40 ms I F = A T J = 5 C 0.46 Maximum instantaneous forward voltage V () I F = A T J = 5 C 0.35 F I F = 0 A T J = 5 C 0.55 I F = 0 A T J = 5 C 0.48 Maximum instantaneous reverse current at DC blocking voltage I () T J = 5 C 0.80 R Rated V R T J = 5 C 60 V ma THERMAL CHARACTERISTICS (T C = 5 C unless otherwise noted) PARAMETER SYMBOL SBL SBLF SBLB UNIT Typical thermal resistance from junction to case per leg R JC C/W ORDERING INFORMATION (Example) PACAGE PREFERRED P/N UNIT WEIGHT (g) PACAGE CODE BASE QUANTITY DELIVERY MODE TO-0AC SBLL5-E3/ /tube Tube ITO-0AC SBLFL5-E3/ /tube Tube TO-63AB SBLBL5-E3/ /tube Tube TO-63AB SBLBL5-E3/ /reel Tape and reel TO-0AC SBLL5HE3/45 () /tube Tube ITO-0AC SBLFL5HE3/45 () /tube Tube TO-63AB SBLBL5HE3/45 () /tube Tube TO-63AB SBLBL5HE3/8 () /reel Tape and reel TO-63AB SBLBL5HE3_A/P ().33 P 50/tube Tube TO-63AB SBLBL5HE3_A/I ().33 I 800/reel Tape and reel Note () AEC-Q qualified Revision: 0-Nov-5 Document Number: 8873 ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT
3 Average Forward Current (A) Transient Thermal Impedance ( C/W) Junction Capacitance (pf) SBLL5, SBLFL5, SBLBL5 RATINGS AND CHARACTERISTICS CURVES (T A = 5 C unless otherwise noted) Case Temperature ( C) Fig. - Forward Current Derating Curve 0 Reverse Voltage (V) Fig. 4 - Typical Junction Capacitance 0 0 Instantaneous Forward Current (A) 0. T J = 75 C T J = 50 C T J = 5 C T J = 0 C T J = 5 C Instantaneous Forward Voltage (V) Fig. - Typical Instantaneous Forward Characteristics t - Pulse Duration (s) Fig. 5 - Typical Transient Thermal Impedance 00 Instantaneous Reverse Current (ma) 0 T J = 50 C T J = 5 C T J = 0 C.0 0. T J = 5 C Percent of Rated Peak Reverse Voltage (%) Fig. 3 - Typical Reverse Characteristics Revision: 0-Nov-5 3 Document Number: 8873 ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT
4 SBLL5, SBLFL5, SBLBL5 PACAGE OUTLINE DIMENSIONS in inches (millimeters) 0.60 (4.06) 0.40 (3.56) (.45) (.4) 0.45 (.54) MAX (9.40) (9.4) PIN PIN TO-0AC 0.54 (3.9) DIA (3.74) DIA. 0.3 (.87) 0.3 (.6) (6.3) 0.65 (5.87) (8.89) (8.38).48 (9.6).8 (8.40) CASE 0.45 (3.68) 0.35 (3.43) (4.) (3.46) 0.85 (4.70) 0.75 (4.44) (.39) (.4) (5.3) (4.55) 0. (.79) 0.0 (.54) 45 REF (5.4) (4.73) (4.) (3.46) (.6) (9.75) PIN ITO-0AC (.93) REF (.93) REF. 7 REF (3.56) DIA. 0.5 (3.7) DIA. 0.9 (4.85) 0.7 (4.35) 0.67 (7.04) 0.65 (6.54) (.45) (.4) 7 REF (8.89) (8.38) 0.90 (4.83) 0.70 (4.3) 0. (.79) 0.0 (.54) 0.35 (3.43) DIA. 0. (3.08) DIA. 7 REF. 0. (.79) 0.0 (.54) 0.5 (.67) (.4) (0.94) 0.07 (0.68) 0.05 (5.0) 0.95 (4.95) 0.0 (0.56) 0.04 (0.36) 0.05 (0.64) 0.05 (0.38) (0.89) 0.05 (0.64) 0.05 (5.) 0.95 (4.95) 0.08 (0.7) 0.00 (0.5) TO-63AB Mounting Pad Layout (9.4) 0.30 (8.3) (0.940) 0.07 (0.686) 0.5 (.67) (.4) 0.4 (.45) (9.65) 0.45 (6.) MIN (4.83) 0.60 (4.06) 0.64 (5.85) 0.59 (5.00) 0.05 (5.0) 0.95 (4.95) (.40) (.4) (.40) (.9) 0 to 0.0 (0 to 0.54) 0. (.79) (.9) 0.0 (0.53) 0.04 (0.36) 0.40 (3.56) 0. (.79) (7.0) 0.59 (5.00) 0.08 (.03) MIN. 0.5 (.67) (.4) 0.4 (.66) MIN (8.38) MIN. 0.5 (3.8) MIN. Revision: 0-Nov-5 4 Document Number: 8873 ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT
5 Legal Disclaimer Notice Vishay Disclaimer ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE. Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively, Vishay ), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other disclosure relating to any product. Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special, consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular purpose, non-infringement and merchantability. Statements regarding the suitability of products for certain types of applications are based on Vishay s knowledge of typical requirements that are often placed on Vishay products in generic applications. Such statements are not binding statements about the suitability of products for a particular application. It is the customer s responsibility to validate that a particular product with the properties described in the product specification is suitable for use in a particular application. Parameters provided in datasheets and / or specifications may vary in different applications and performance may vary over time. All operating parameters, including typical parameters, must be validated for each customer application by the customer s technical experts. Product specifications do not expand or otherwise modify Vishay s terms and conditions of purchase, including but not limited to the warranty expressed therein. Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining applications or for any other application in which the failure of the Vishay product could result in personal injury or death. Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk. Please contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for such applications. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners. Revision: 3-Jun-6 Document Number: 900
Dual Common-Cathode Ultrafast Plastic Rectifier
(F,B)6AT thru (F,B)6JT Dual Common-Cathode Ultrafast Plastic Rectifier TO-0AB 6xT PIN PIN 3 PIN CASE 3 TO-63AB ITO-0AB F6xT PIN PIN 3 PIN 3 FEATURES Glass passivated chip junction Ultrafast recovery time
More informationHigh Performance Schottky Rectifier, 3.0 A
High Performance Schottky Rectifier, 3. A Cathode Anode SMC PRODUCT SUMMARY Package SMC I F(AV) 3. A V R 4 V V F at I F.46 V I RM 3 ma at 25 C T J max. 5 C Diode variation Single die E AS 6. mj FEATURES
More informationHigh Performance Schottky Rectifier, 1.0 A
High Performance Schottky Rectifier, 1. A VS-BQ3-M3 Cathode Anode SMB PRODUCT SUMMARY Package SMB I F(AV) 1. A V R 3 V V F at I F.42 V I RM max. 15 ma at 125 C T J max. 15 C Diode variation Single die
More informationSchottky Rectifier, 1.0 A
Schottky Rectifier, 1.0 A VS-BQ040-M3 Cathode Anode PRODUCT SUMMARY Package SMB I F(AV) 1.0 A V R 40 V V F at I F 0.38 V I RM 9 ma at 125 C T J max. 150 C Diode variation Single die E AS 3.0 mj FEATURES
More informationP6KE6.8A thru P6KE540A. TRANSZORB Transient Voltage Suppressors. Vishay General Semiconductor. www.vishay.com FEATURES PRIMARY CHARACTERISTICS
TRANSZORB Transient Voltage Suppressors DO-204AC (DO-15) PRIMARY CHARACTERISTICS V WM 5.8 V to 459 V V BR uni-directional 6.8 V to 540 V V BR bi-directional 6.8 V to 440 V P PPM 600 W P D 5.0 W I FSM (uni-directional
More informationHigh Performance Schottky Rectifier, 1 A
High Performance Schottky Rectifier, A VS-MQNPbF Cathode Anode DO-24AC (SMA) PRODUCT SUMMARY Package DO-24AC (SMA) I F(AV) A V R V V F at I F.78 V I RM ma at 25 C T J max. 5 C Diode variation Single die
More informationSchottky Rectifier, 1.0 A
Schottky Rectifier, 1.0 A VS-BQ060PbF Vishay High Power Products FEATURES Small foot print, surface mountable Low forward voltage drop SMB Cathode Anode High frequency operation Guard ring for enhanced
More informationSmall Signal Fast Switching Diode
Small Signal Fast Switching Diode MECHANICAL DATA Case: SOD- Weight: approx.. mg Packaging codes/options: 8/K per " reel (8 mm tape), K/box 08/K per 7" reel (8 mm tape), K/box FEATURES Silicon epitaxial
More informationSchottky Rectifier, 100 A
Schottky Rectifier, A VS-BGQ Cathode Anode PowerTab PRODUCT SUMMARY Package PowerTab I F(AV) A V R V V F at I F 0.82 V I RM 180 ma at 125 C T J max. 175 C Diode variation Single die E AS 9 mj FEATURES
More information1.5KE6.8A thru 1.5KE540A, 1N6267A thru 1N6303A. TRANSZORB Transient Voltage Suppressors. Vishay General Semiconductor. www.vishay.
TRANSZORB Transient Voltage Suppressors Case Style.5KE FEATURES Glass passivated chip junction Available in uni-directional and bi-directional 500 W peak pulse power capability with a /0 μs waveform, repetitive
More informationSurface Mount Schottky Barrier
FEATURES - Very low profile - typical height of 0.68mm - Low power loss, high efficiency - Ideal for automated placement - Moisture sensitivity level: level, per J-STD-020 - Compliant to RoHS Directive
More informationSmall Signal Fast Switching Diode FEATURES PART ORDERING CODE INTERNAL CONSTRUCTION TYPE MARKING REMARKS
Small Signal Fast Switching Diode MARKING (example only) Bar = cathode marking XY = type code X Y 6 MECHANICAL DATA Case: SOD- Weight: approx.. mg Packaging codes/options: 8/K per " reel (8 mm tape), K/box
More informationSchottky Rectifier, 1 A
Schottky Rectifier, 1 A BQPbF FEATURES SMB Cathode Anode Small foot print, surface mountable Low forward voltage drop High frequency operation Available RoHS* COMPLIANT Guard ring for enhanced ruggedness
More informationStandard Recovery Diodes, Generation 2 DO-5 (Stud Version), 95 A
Standard Recovery Diodes, Generation 2 DO-5 (Stud Version), 95 A 95PF(R)... DO-203AB (DO-5) PRODUCT SUMMARY I F(AV) Package Circuit configuration 95PF(R)...W DO-203AB (DO-5) 95 A DO-203AB (DO-5) Single
More informationStandard Recovery Diodes, (Stud Version), 40 A
Standard Recovery Diodes, (Stud ersion), 40 A S- FEATURES High surge current capability Stud cathode and stud anode version Leaded version available DO-203AB (DO-5) PRODUCT SUMMARY I F(A) 40 A Package
More informationStandard Recovery Diodes (Hockey PUK), 2100 A
Standard Recovery Diodes (Hockey PUK), 2 A VS-SD10C..K Series DO-200AC (K-PUK) PRODUCT SUMMARY I F(AV) 2 A Package DO-200AC (K-PUK) Circuit configuration Single diode FEATURES Wide current range High voltage
More informationSuperTan Extended (STE) Capacitors, Wet Tantalum Capacitors with Hermetic Seal
SuperTan Extended () Capacitors, Wet Tantalum Capacitors with Hermetic Seal FEATURES SuperTan Extended () represents a major breakthrough in wet tantalum capacitor Available technology. Its unique cathode
More information1 Form A Solid State Relay
Form A Solid State Relay VOAT, VOAABTR FEATURES 9 S S DC S' 3 S' High speed SSR - t on /t off < 8 μs Maximum R ON. Isolation test voltage 3 V RMS Load voltage V Load current A DC configuration DIP- package
More informationSurface Mount Multilayer Ceramic Chip Capacitor Solutions for High Voltage Applications
Surface Mount Multilayer Ceramic Chip Capacitor Solutions for High Voltage Applications ELECTRICAL SPECIFICATIONS X7R GENERAL SPECIFICATION Note Electrical characteristics at +25 C unless otherwise specified
More informationOptocoupler, Phototransistor Output, with Base Connection, 300 V BV CEO
SFH64 Optocoupler, Phototransistor Output, with Base Connection, 3 V BV CEO i1794-3 DESCRIPTION The SFH64 is an optocoupler with very high BV CER, a minimum of 3 V. It is intended for telecommunications
More informationSurface Mount TRANSZORB Transient Voltage Suppressors
Surface Mount TRANSZORB Transient Voltage Suppressors DO-214AA (SMB J-Bend) PRIMARY CHARACTERISTICS V BR (bi-directional) 6.4 V to 231 V V BR (uni-directional) 6.4 V to 231 V V WM 5.0 V to 188 V P PPM
More informationHigh Speed Infrared Emitting Diode, 940 nm, GaAlAs, MQW
High Speed Infrared Emitting Diode, 940 nm, GaAlAs, MQW DESCRIPTION is an infrared, 940 nm side looking emitting diode in GaAlAs multi quantum well (MQW) technology with high radiant power and high speed,
More information50 W Power Resistor, Thick Film Technology, TO-220
50 W Power Resistor, Thick Film Technology, TO-220 FEATURES 50 W at 25 C heatsink mounted Adjusted by sand trimming Leaded or surface mount versions High power to size ratio Non inductive element Material
More informationSolid Tantalum Surface Mount Capacitors TANTAMOUNT, Molded Case, Low ESR
Solid Tantalum Surface Mount Capacitors TANTAMOUNT, Molded Case, Low ESR Effective September 2005, new capacitor ratings will not be added to the series. All new ratings are available in the TR3 series.
More informationAluminum Electrolytic Capacitors Power Economic Printed Wiring
Aluminum Electrolytic Capacitors Power Economic Printed Wiring 0/0 PECPW 00/0 PEDPW Fig. QUICK REFERENCE DATA DESCRIPTION high ripple current 0/0 PECPW long life 0 C Nominal case size (Ø D x L in mm) Rated
More informationAluminum Electrolytic Capacitors Power Eurodin Printed Wiring
Aluminum Electrolytic Capacitors Power Eurodin Printed Wiring 00/0 PEDPW Fig. QUICK REFERENCE DATA DESCRIPTION VALUE 00 0 Nominal case size (Ø D x L in mm) x 0 to 0 x 00 Rated capacitance range 0 μf to
More informationFeatures. Case: TO-220-3 (2), TO-220F-3 (Option 1), TO-252-2 (1) and TO- 263-2 Power Management Instrumentation
HIGH VOLTAGE POWER SCHOTTKY RECTIFIER Product Summary V F (MAX) (V) I R (MAX) (ma) V RRM (V) I O (A) @ +25 C @ +25 C 100 2x10 0.85 0.1 Description High voltage dual Schottky rectifier suited for switch
More informationPDS5100H. Product Summary. Features and Benefits. Mechanical Data. Description and Applications. Ordering Information (Note 5) Marking Information
Green 5A HIGH VOLTAGE SCHOTTKY BARRIER RECTIFIER POWERDI 5 Product Summary I F V R V F MAX (V) I R MAX (ma) (V) (A) @ +25 C @ +25 C 1 5..71.35 Description and Applications This Schottky Barrier Rectifier
More informationHigh Power Infrared Emitting Diode, 940 nm, GaAlAs, MQW
High Power Infrared Emitting Diode, 94 nm, GaAlAs, MQW DESCRIPTION 94 8389 is an infrared, 94 nm emitting diode in GaAlAs multi quantum well (MQW) technology with high radiant power and high speed molded
More information1 Form A Solid State Relay
1 Form A Solid State Relay Vishay Semiconductors DIP i1791- SMD DESCRIPTION Vishay solid state relays (SSRs) are miniature, optically coupled relays with high-voltage MOSFET outputs. The LH1518 relays
More informationPower Resistor Thick Film Technology
Power Resistor Thick Film Technology LTO series are the extension of RTO types. We used the direct ceramic mounting design (no metal tab) of our RCH power resistors applied to semiconductor packages. FEATURES
More informationOptocoupler, Phototransistor Output, with Base Connection
Optocoupler, Phototransistor Output, with Base Connection FEATURES i794-4 DESCRIPTION This datasheet presents five families of Vishay industry standard single channel phototransistor couplers. These families
More informationSilicon PIN Photodiode
VEMD940F Silicon PIN Photodiode DESCRIPTION VEMD940F is a high speed and high sensitive PIN photodiode in a miniature side looking, surface mount package (SMD) with daylight blocking filter. Filter is
More informationOptocoupler, Phototransistor Output, 4 Pin LSOP, Long Creepage Mini-Flat Package
Optocoupler, Phototransistor Output, 4 Pin LSOP, Long Creepage Mini-Flat Package FEATURES A 4 C Low profile package High collector emitter voltage, V CEO = 8 V 7295-6 DESCRIPTION The has a GaAs infrared
More informationSilicon PIN Photodiode
Silicon PIN Photodiode DESCRIPTION 94 8583 BPW34 is a PIN photodiode with high speed and high radiant sensitivity in miniature, flat, top view, clear plastic package. It is sensitive to visible and near
More informationPower MOSFET FEATURES. IRFZ44PbF SiHFZ44-E3 IRFZ44 SiHFZ44 T C = 25 C
Power MOSFET PRODUCT SUMMARY (V) 60 R DS(on) (Ω) V GS = 10 V 0.028 Q g (Max.) (nc) 67 Q gs (nc) 18 Q gd (nc) 25 Configuration Single FEATURES Dynamic dv/dt Rating 175 C Operating Temperature Fast Switching
More informationPower MOSFET FEATURES. IRF610PbF SiHF610-E3 IRF610 SiHF610. PARAMETER SYMBOL LIMIT UNIT Drain-Source Voltage V DS 200 V Gate-Source Voltage V GS ± 20
Power MOSFET PRODUCT SUMMARY (V) 00 R DS(on) ( ) = 1.5 Q g (Max.) (nc) 8. Q gs (nc) 1.8 Q gd (nc) 4.5 Configuration Single FEATURES Dynamic dv/dt Rating Repetitive Avalanche Rated Fast Switching Ease of
More informationMetal Film Resistors, Pulse Withstanding Protective
End of Life - August 213 www.vishay.com Metal Film Resistors, Pulse Withstanding Protective STANDARD ELECTRICAL SPECIFICATIONS GLOBAL HISTORICAL POWER RATING P 7 C W FEATURES Special design provides lightning
More informationOptocoupler, Phototransistor Output, AC Input
Optocoupler, Phototransistor Output, AC Input DESCRIPTION The SFH62A (DIP) and SFH626 (SMD) feature a high current transfer ratio, low coupling capacitance and high isolation voltage. These couplers have
More informationHigh Speed Infrared Emitting Diode, 870 nm, GaAlAs Double Hetero
TSFF55 High Speed Infrared Emitting Diode, 87 nm, GaAlAs Double Hetero 26 DESCRIPTION TSFF55 is an infrared, 87 nm emitting diode in GaAlAs double hetero (DH) technology with high radiant power and high
More informationPower MOSFET FEATURES. IRL540PbF SiHL540-E3 IRL540 SiHL540
Power MOSFET PRODUCT SUMMARY (V) 100 R DS(on) (Ω) = 5.0 V 0.077 Q g (Max.) (nc) 64 Q gs (nc) 9.4 Q gd (nc) 27 Configuration Single TO220AB G DS ORDERING INFORMATION Package Lead (Pb)free SnPb G D S NChannel
More informationPhotovoltaic MOSFET Driver with Integrated Fast Turn-Off, Solid-State Relay
Photovoltaic MOSFET Driver with Integrated Fast Turn-Off, Solid-State Relay i7966_6 Turn Off FEATURES Open circuit voltage at I F = ma, 8. V typical Short circuit current at I F = ma, 5 μa typical Isolation
More informationSTPS5L60. Power Schottky rectifier. Description. Features
Power Schottky rectifier Datasheet - production data Description Power Schottky rectifier suited for switch mode power supplies and high frequency inverters. This device is intended for use in low voltage
More informationSMD Aluminum Solid Capacitors with Conductive Polymer
SMD Aluminum Solid Capacitors with Conductive Polymer FEATURES New OS-CON series provides improved characteristics with up to 25 C temperature capability and 35 V maximum voltage rating in a SMD package
More informationUltrabright White LED, Ø 3 mm
Ultrabright White LED, Ø 3 mm DESCRIPTION The VLHW41 series is a clear, untinted 3 mm LED for high end applications where supreme luminous intensity is required. These lamps utilize the highly developed
More informationPower MOSFET FEATURES. IRF740PbF SiHF740-E3 IRF740 SiHF740. PARAMETER SYMBOL LIMIT UNIT Drain-Source Voltage V DS 400 V Gate-Source Voltage V GS ± 20
Power MOSFET PRODUCT SUMMARY (V) 400 R DS(on) (Ω) = 0.55 Q g (Max.) (nc) 63 Q gs (nc) 9.0 Q gd (nc) 3 Configuration Single FEATURES Dynamic dv/dt Rating Repetitive Avalanche Rated Fast Switching Ease of
More informationPower MOSFET. IRF510PbF SiHF510-E3 IRF510 SiHF510. PARAMETER SYMBOL LIMIT UNIT Drain-Source Voltage V DS 100 V Gate-Source Voltage V GS ± 20
Power MOSFET PRODUCT SUMMARY (V) 100 R DS(on) () = 0.54 Q g max. (nc) 8.3 Q gs (nc) 2.3 Q gd (nc) 3.8 Configuration Single D TO220AB G FEATURES Dynamic dv/dt rating Available Repetitive avalanche rated
More informationSilicon PIN Photodiode
Silicon PIN Photodiode DESCRIPTION 94 8632 is a PIN photodiode with high speed and high radiant sensitivity in a clear, side view plastic package. It is sensitive to visible and near infrared radiation.
More informationAluminum Electrolytic Capacitors Axial Miniature, Long-Life
Aluminum Electrolytic Capacitors Axial Miniature, Long-Life 38 AML 0 ASM smaller dimensions Fig. QUICK REFERENCE DATA DESCRIPTION Nominal case sizes (Ø D x L in mm) 6.3 x.7 to 0 x 5 VALUE 0 x 30 to x 38
More informationReflective Optical Sensor with Transistor Output
TCRT5000, TCRT5000L Reflective Optical Sensor with Transistor Output FEATURES Package type: leaded Detector type: phototransistor Dimensions (L x W x H in mm): 10.2 x 5.8 x 7 Peak operating distance: 2.5
More informationReflective Optical Sensor with Transistor Output
www.vishay.com TCRT, TCRT Reflective Optical Sensor with Transistor Output 2836 TCRT A C E C TCRT 955_ FEATURES Package type: leaded Detector type: phototransistor Dimensions (L x W x H in mm): 7 x 4 x
More informationOptocoupler, Phototransistor Output, with Base Connection
4N25, 4N26, 4N27, 4N28 Optocoupler, Phototransistor Output, FEATURES A 6 B Isolation test voltage 5000 V RMS Interfaces with common logic families C 2 5 C Input-output coupling capacitance < pf NC 3 4
More informationMBR2045CT SCHOTTKY BARRIER RECTIFIER 20 AMPERES 45 VOLTS
Preferred Device... using the Schottky Barrier principle with a platinum barrier metal. These state of the art devices have the following features: Guardring for Stress Protection Low Forward Voltage 150
More informationHigh Power Infrared Emitting Diode, 940 nm, GaAlAs/GaAs
TSAL51 High Power Infrared Emitting Diode, 94 nm, GaAlAs/GaAs DESCRIPTION 96 1155 TSAL51 is an infrared, 94 nm emitting diode in GaAlAs/GaAs technology with high radiant power, molded in a blue-gray plastic
More informationP-Channel 20 V (D-S) MOSFET
Si30CDS P-Channel 0 V (D-S) MOSFET MOSFET PRODUCT SUMMARY V DS (V) R DS(on) ( ) I D (A) a Q g (Typ.) - 0 0. at V GS = - 4.5 V - 3. 0.4 at V GS = -.5 V -.7 3.3 nc TO-36 (SOT-3) FEATURES Halogen-free According
More informationElectrical Double Layer Energy Storage Capacitors Power and Energy Versions
Electrical Double Layer Energy Storage Capacitors Power and Energy Versions FEATURES Polarized energy storage capacitor with high capacity and energy density Energy version with high stability available
More informationAluminum Electrolytic Capacitors Radial Miniature, Low Impedance, High Vibration Capability
Aluminum Electrolytic Capacitors Radial Miniature, Low Impedance, High Vibration Capability 048 RML 48 RUS lower longer life 36 RVI miniaturize 50 RMI high vibration FEATURES Very long useful life: 7000
More informationHigh Power Infrared Emitting Diode, 940 nm, GaAlAs/GaAs
TSAL64 High Power Infrared Emitting Diode, 94 nm, GaAlAs/GaAs DESCRIPTION 94 8389 TSAL64 is an infrared, 94 nm emitting diode in GaAlAs/GaAs technology with high radiant power molded in a blue-gray plastic
More informationSilicon NPN Phototransistor
Silicon NPN Phototransistor DESCRIPTION 7 is a silicon NPN phototransistor with high radiant sensitivity in black, T-1¾ plastic package with base terminal and daylight blocking filter. Filter bandwidth
More informationSTPS40L15CW. 2 x 20 Amps SCHOTTKY RECTIFIER. Case Styles. I F(AV) = 40Amp V R = 15V. Bulletin PD-20622 rev. B 10/06. Description/ Features
Bulletin PD-20622 rev. B 0/06 STPS40L5CW SCHOTTKY RECTIFIER 2 x 20 Amps I F(AV) = 40Amp V R = 5V Major Ratings and Characteristics Characteristics Values Units I F(AV) Rectangular 40 A waveform V RRM 5
More informationP-Channel 20-V (D-S) MOSFET
Si33DS P-Channel -V (D-S) MOSFET PRODUCT SUMMARY V DS (V) R DS(on) (Ω) I D (A).39 at V GS = -.5 V -.7 -.5 at V GS = -.5 V -..68 at V GS = -.8 V - 3.5 FEATURES Halogen-free According to IEC 69-- Available
More informationAC Line Rated Ceramic Disc Capacitors Class X1, 760 V AC / Class Y1, 500 V AC
4L Series AC Line Rated Ceramic Disc Capacitors Class X, 76 V AC / Class Y, 5 V AC FEATURES Complies with IEC 6384-4, 4 th edition High reliability Radial leads High capacitance up to nf Singlelayer AC
More informationOptocoupler, Phototransistor Output, Dual Channel, SOIC-8 Package
ILD25T, ILD26T, ILD27T, ILD211T, ILD213T Optocoupler, Phototransistor Output, Dual Channel, SOIC-8 Package i17925 A1 C2 A3 C4 i17918-2 8C 7E 6C 5E DESCRIPTION The ILD25T, ILD26T, ILD27T, ILD211T, and ILD213T
More informationAluminum Capacitors Solid Axial
SAL-A End of Life. Last Available Purchase Date is -December- Radial higher CV/volume Fig. QUICK REFERENCE DATA DESCRIPTION VALUE Maximum case size (Ø D x L in mm) 6.7 x. to.9 x. Rated capacitance range
More informationIR Receiver Module for Light Barrier Systems
Not for New Design - Alternative Available: New TSSP4038 (#82458) www.vishay.com IR Receiver Module for Light Barrier Systems TSOP4038 2 3 MECHANICAL DATA Pinning: = OUT, 2 = GND., 3 = V S 6672 FEATURES
More informationPulse Proof Thick Film Chip Resistors
Pulse Proof Thick Film Chip Resistors FEATURES High pulse performance, up to kw Stability R/R 1 % for h at 70 C AEC-Q200 qualified Material categorization: for definitions of compliance please see www.vishay.com/doc?99912
More informationPreamplifier Circuit for IR Remote Control
Preamplifier Circuit for IR Remote Control 22906 FEATURES Carrier-out-function: carrier frequency and burst length accurately correspond to the input signal AC coupled response from 20 khz to 60 khz; all
More informationAmbient Light Sensor
TEPT56 Ambient Light Sensor DESCRIPTION 94 839 TEPT56 ambient light sensor is a silicon NPN epitaxial planar phototransistor in a T-1¾ package. It is sensitive to visible light much like the human eye
More informationPower MOSFET FEATURES. IRF520PbF SiHF520-E3 IRF520 SiHF520. PARAMETER SYMBOL LIMIT UNIT Drain-Source Voltage V DS 100 V Gate-Source Voltage V GS ± 20
Power MOSFET PRODUCT SUMMARY (V) 100 R DS(on) ( ) = 0.7 Q g (Max.) (nc) 16 Q gs (nc) 4.4 Q gd (nc) 7.7 Configuration Single TO0AB G DS ORDERING INFORMATION Package Lead (Pb)free SnPb G D S NChannel MOSFET
More informationSK54B SCHOTTKY RECTIFIER
Applications: SCHOTTKY RECTIFIER Features: Switching power supply Converters Free-Wheeling diodes Reverse battery protection Disk drives Battery charging Small foot print, surface mountable Very low forward
More informationOptocoupler, Phototransistor Output, High Reliability, 5300 V RMS, Low Input Current
Optocoupler, Phototransistor Output, High Reliability, 53 V RMS, Low Input Current FEATURES A C 1 2 4 3 C E Operating temperature from -55 C to +11 C Good CTR linearity depending on forward current Isolation
More information10MQ100N SCHOTTKY RECTIFIER. I F(AV) = 2.1Amp V R = 100V. Bulletin PD-20520 rev. M 07/04. Major Ratings and Characteristics. Description/ Features
0MQ00N SCHOTTKY RECTIFIER 2. Amp I F(AV) = 2.Amp V R = 00V Major Ratings and Characteristics Characteristics 0MQ00N Units I F DC 2. A V RRM 00 V I FSM @ tp = 5 µs sine 20 A V F @.5Apk, T =25 C 0.68 V J
More informationMetal Film Resistors, Industrial, Flameproof
End of Life - August 13 Metal Film Resistors, Industrial, Flameproof STANDARD ELECTRICAL SPECIFICATIONS FEATURES Small physical size Low cost resistors have the ability to withstand overloads up to times
More informationSilicon NPN Phototransistor
Silicon NPN Phototransistor 16758-1 VEMT252X1 DESCRIPTION VEMT25X1 VEMT25X1 series are silicon NPN epitaxial planar phototransistors in a miniature dome lens, clear epoxy package for surface mounting.
More informationThick Film Resistor Networks, Dual-In-Line, Molded DIP
Thick Film Resistor Networks, Dual-In-Line, Molded DIP FEATURES Isolated, bussed, and dual terminator schematics available 0.160" (4.06 mm) maximum seated height and rugged, molded case construction Thick
More informationPower MOSFET FEATURES. IRF540PbF SiHF540-E3 IRF540 SiHF540. PARAMETER SYMBOL LIMIT UNIT Drain-Source Voltage V DS 100 V Gate-Source Voltage V GS ± 20
Power MOSFET PRODUCT SUMMARY (V) 100 R DS(on) ( ) = 0.077 Q g (Max.) (nc) 72 Q gs (nc) 11 Q gd (nc) 32 Configuration Single TO220AB G DS ORDERING INFORMATION Package Lead (Pb)free SnPb G D S NChannel MOSFET
More informationGreen. Part Number Qualification Case Packaging B1X0Q-13-F Automotive SMA 5,000/Tape & Reel B1X0BQ-13-F Automotive SMB 3,000/Tape & Reel
reen 1.0A SURFAE MOUNT SHOTTKY BARRIER RETIFIER Product Summary B120Q/BQ-B140Q/BQ V RRM (V) I O (A) V F Max (V) I R Max (ma) T A = +25 T A = +25 20/30/40 1.0 0.5 0.5 B150Q/BQ, B160Q/BQ V F Max (V) I R
More informationSTTH1R04-Y. Automotive ultrafast recovery diode. Features. Description
Automotive ultrafast recovery diode Features Datasheet - production data K SMA STTH1R4AY Table 1. Device summary Symbol Value I F(AV) 1 A V RRM 4 V T j (max) 175 C V F (typ) t rr (typ) A K.9 V 14 ns A
More informationPower MOSFET. IRF9520PbF SiHF9520-E3 IRF9520 SiHF9520. PARAMETER SYMBOL LIMIT UNIT Drain-Source Voltage V DS - 100 V Gate-Source Voltage V GS ± 20
Power MOSFET PRODUCT SUMMARY (V) 100 R DS(on) ( ) = 10 V 0.60 Q g (Max.) (nc) 18 Q gs (nc) 3.0 Q gd (nc) 9.0 Configuration Single TO220AB G DS ORDERING INFORMATION Package Lead (Pb)free SnPb G S D PChannel
More informationN-Channel 100 V (D-S) MOSFET
Si4DS N-Channel V (D-S) MOSFET MOSFET PRODUCT SUMMARY V DS (V) R DS(on) ( ) I D (A) a Q g (Typ.).4 at V GS = V..67 at V GS = 6 V..9 nc.78 at V GS = 4.5 V.7 FEATURES TrenchFET Power MOSFET % R g Tested
More informationSchottky barrier quadruple diode
Rev. 3 8 October 2012 Product data sheet 1. Product profile 1.1 General description with an integrated guard ring for stress protection. Two electrically isolated dual Schottky barrier diodes series, encapsulated
More informationP-Channel 1.25-W, 1.8-V (G-S) MOSFET
Si5DS P-Channel.5-W,.-V (G-S) MOSFET PRODUCT SUMMARY V DS (V) R DS(on) (Ω) I D (A).5 at V GS = -.5 V ±.5 -.7 at V GS = -.5 V ±. at V GS = -. V ± FEATURES Halogen-free According to IEC 9-- Available TrenchFET
More informationBZW50. Transil, transient voltage surge suppressor (TVS) Features. Description
Transil, transient voltage surge suppressor (TVS) Datasheet production data Features Peak pulse power: 5000 W (10/0 µs) Stand-off voltage range from 10 V to 180 V Unidirectional and bidirectional types
More information2.5 A Output Current IGBT and MOSFET Driver
VO. A Output Current IGBT and MOSFET Driver 9 DESCRIPTION NC A C NC _ The VO consists of a LED optically coupled to an integrated circuit with a power output stage. This optocoupler is ideally suited for
More informationPower Resistor for Mounting onto a Heatsink Thick Film Technology
DIMENSIONS in millimeters Power Resistor for Mounting onto a Heatsink Thick Film Technology FEATURES 800 W at 85 C bottom case temperature Wide resistance range: 0.3 to 900 k E24 series Non inductive Easy
More informationLow Current SMD LED PLCC-2
Low Current SMD LED PLCC-2 VLMC31. 19225 DESCRIPTION These new devices have been designed to meet the increasing demand for low current SMD LEDs. The package of the VLMC31. is the PLCC-2 (equivalent to
More informationOptocoupler, Photodarlington Output, Dual Channel, SOIC-8 Package
Optocoupler, Photodarlington Output, i179042 DESCRIPTION A1 C 2 A3 C4 8 C 7E 6C 5E The ILD233T is a high current transfer ratio (CTR) optocoupler. It has a gallium arsenide infrared LED emitter and silicon
More informationP-Channel 60 V (D-S) MOSFET
TP6K P-Channel 6 V (D-S) MOSFET G S PRODUCT SUMMARY V DS (V) R DS(on) ( ) V GS(th) (V) I D (ma) - 6 6 at V GS = - V - to - - 85 TO-6 (SOT-) Top View D Marking Code: 6Kwll 6K = Part Number Code for TP6K
More informationPower MOSFET FEATURES. IRF9640PbF SiHF9640-E3 IRF9640 SiHF9640
Power MOSFET PRODUCT SUMMARY V DS (V) 200 R DS(on) (Ω) = 10 V 0.50 Q g (Max.) (nc) 44 Q gs (nc) 7.1 Q gd (nc) 27 Configuration Single TO220AB G DS ORDERING INFORMATION Package Lead (Pb)free SnPb G S D
More informationDiode, Schottky SMB/DO-214AA. Page <1> 24/04/08 V1.1. Dimensions Inches (Millimeters)
Features: For surface mounted application. Metal to silicon rectifier, majority carrier conduction. Low forward voltage drop. Easy pick and place. High surge current capability. Plastic material. Epitaxial
More informationCharacteristics Values Units. Rectangular waveform 0.5 A. range - 55 to 150 C
Bulletin I075 rev. C 05/06 IR0530CSPTRPbF 0.5 Amp 30 Volt Features Ultra Low V F To Footprint Area Very Low Profile (
More informationSTIEC45-xxAS, STIEC45-xxACS
Transil TVS for IEC 61000-4-5 compliance Datasheet - production data differential mode MIL STD 883G, method 3015-7 Class 3B 25 kv HBM (human body model) Resin meets UL 94, V0 MIL-STD-750, method 2026 solderability
More informationSMD PTC - Nickel Thin Film Linear Thermistors
SMD PTC - Nickel Thin Film Linear Thermistors Notes (1) Contact if closer TCR lot tolerance is desired. (2) Other R 25 -values and tolerances are available upon request. (3) Rated continuous working voltage
More informationLoad Switch with Level-Shift
Load Switch with Level-Shift PRODUCT SUMMARY V IN (V DS2 ) (V) R DS(on) (Ω) I D (A).5 to 2 DESCRIPTION.54 at V IN = 4.5 V 3.9.77 at V IN = 2.5 V 3.2.6 at V IN =.8 V 2.8.65 at V IN =.5 V 2.2 The includes
More informationPower MOSFET FEATURES. IRF740PbF SiHF740-E3 IRF740 SiHF740. PARAMETER SYMBOL LIMIT UNIT Drain-Source Voltage V DS 400 V Gate-Source Voltage V GS ± 20
Power MOSFET PRODUCT SUMMARY (V) 400 R DS(on) (Ω) = 0.55 Q g (Max.) (nc) 63 Q gs (nc) 9.0 Q gd (nc) 3 Configuration Single FEATURES Dynamic dv/dt Rating Repetitive Avalanche Rated Fast Switching Ease of
More informationESCC 4001/026 Qualified ( ) High Stability Thick Film Resistor Chips
ESCC 4001/026 Qualified ( ) High Stability Thick Film Resistor Chips thick film chip resistors are specially designed to meet the requirements of the ESA 4001/026 specification. They have undergone the
More informationPulse Proof, High Power Thick Film Chip Resistors
Pulse Proof, High Power Thick Film Chip Resistors STANDARD ELTRICAL SPIFICATIONS MODEL CASE SIZE INCH CASE SIZE METRIC POWER RATING P 70 W LIMITING ELEMENT VOLTAGE U max. AC/DC -HP e3 FTURES Excellent
More informationSCHOTTKY BARRIER RECTIFIERS 1.0 AMPERE 20, 30 and 40 VOLTS
1N5817 and 1N5819 are Preferred Devices... employing the Schottky Barrier principle in a large area metal to silicon power diode. State of the art geometry features chrome barrier metal, epitaxial construction
More informationThick Film Resistor Networks, Military, MIL-PRF-83401 Qualified, Type RZ010 and RZ020 Dual-In-Line, Molded DIP
MDM (Military M831/1 and /2) Thick Film Resistor Networks, Military, MIL-PRF-831 Qualified, Type RZ1 and RZ2 Dual-In-Line, Molded DIP STANDARD ELECTRICAL SPECIFICATIONS VISHAY DALE MODEL/ PIN NO. MIL STYLE
More informationUV SMD LED PLCC-2 FEATURES APPLICATIONS. at I F (ma) (ma) MIN. TYP. MAX. MIN. TYP. MAX. MIN. TYP. MAX.
UV SMD LED PLCC-2 VLMU31 19225 DESCRIPTION The package of the VLMU31-series is the PLCC-2. It consists of a lead frame which is embedded in a white thermoplast. The reflector inside this package is filled
More information