General-purpose Relays

Transcription

1 General-purpose Relays MK-S New Model General-purpose Relays Featuring Mechanical Indicator and Lockable Test Button Built-in operation indicator (mechanical and LED), and new models with lockable test button. Nameplate provided on models with lockable test button. RoHS Compliant. UL approval for most models. (UL approval pending for models with built-in LED indicators.) Features Two-way Action Test Button Relay in Normal Operation For Momentary Operation For Lock Operation Yellow button Pull down the test button to the first position, then press the yellow button with an insulated tool to operate the contact. Pull down the test button to the second position. (The contact is now in the locked position.) Model Number Structure Model Number Legend 1 1. Contact Form : DPDT : PDT. Terminals P: Plug-in. Mechanical Indicator/Test Button Blank: Mechanical indicator I: Mechanical indicator and lockable test button. LED Indicator Blank: Standard N: LED indicator. Coil Polarity Blank: Standard 1: Reverse polarity (DC coil only). Surge Absorption Blank: Standard D: Surge absorber diode (DC coil only) V: Surge absorber varistor (AC coil only). Internal Connections Blank: Standard or : Non-standard connections (Refer to Terminal Arrangement/Internal Connection.). Rated Voltage (Refer to Coil Ratings.) General-purpose Relays MK-S New Model 1

2 Ordering Information List of Models Type Standard Models LED Indicator (See note.) Diode (See note.) LED Indicator and Diode Varistor LED Indicator and Varistor Terminals Contact form Internal connections (See note.) List of Models (Order Separately) With mechanical indicator With mechanical indicator and lockable test button Coil ratings Plug-in DPDT Standard MKSP MKSPI AC/DC Non-standard MKSP- MKSPI- PDT Standard MKSP MKSPI Non-Standard MKSP- MKSPI- MKSP- MKSPI- DPDT Standard MKSPN(1) MKSPIN(1) AC/DC Non-standard MKSPN(1)- MKSPIN(1)- PDT Standard MKSPN(1) MKSPIN(1) Non-Standard MKSPN(1)- MKSPIN(1)- MKSPN(1)- MKSPIN(1)- DPDT Standard MKSP(1)-D MKSPI(1)-D DC Non-standard MKSP(1)-D- MKSPI(1)-D- PDT Standard MKSP(1)-D MKSPI(1)-D Non-Standard MKSP(1)-D- MKSPI(1)-D- MKSP(1)-D- MKSPI(1)-D- DPDT Standard MKSPN-D MKSPIN-D DC Non-standard MKSPN-D- MKSPIN-D- PDT Standard MKSPN-D MKSPIN-D Non-Standard MKSPN-D- MKSPIN-D- MKSPN-D- MKSPIN-D- DPDT Standard MKSP-V MKSPI-V AC Non-standard MKSP-V- MKSPI-V- PDT Standard MKSP-V MKSPI-V Non-Standard MKSP-V- MKSPI-V- MKSP-V- MKSPI-V- DPDT Standard MKSPN-V MKSPIN-V AC Non-standard MKSPN-V- MKSPIN-V- PDT Standard MKSPN-V MKSPIN-V Non-Standard MKSPN-V- MKSPIN-V- MKSPN-V- MKSPIN-V- Note: 1. When ordering, add the rated voltage to the model number. Rated voltages are given in the coil ratings table in the specifications. Example: MKSP VDC Rated voltage. The DC coil comes in two types: standard coil polarity and reverse coil polarity. Refer to Terminal Arrangement and Internal Connections. Example: MKSPIN1- VDC Reverse coil polarity. Refer to Terminal Arrangement and Internal Connections for non-standard internal connections. Item Type Model Track-mounted Socket -pin PF0A-E 11-pin PF11A-E -pin PF0A-D 11-pin PF11A-D Hold-down Clip (For PF0A-E and PF11A-E) PFC-A1 General-purpose Relays MK-S New Model

3 Specifications Ratings Coil Ratings Rated voltage Rated current Coil resistance Must operate Must release 0 Hz 0 Hz voltage voltage AC V ma ma.1 Ω 0% max. of rated 0% min. of rated 1 V 1 ma 1 ma 1. Ω voltage voltage at 0 Hz V 110 ma. ma. Ω % min. of rated voltage at 0 Hz 100 V. ma.1 ma 0 Ω 110 V. ma 1.0 ma Ω 00 V 1. ma 11. ma,10 Ω 0 V 1.1 ma 10. ma,0 Ω 0 V 10.0 ma 11. ma,0 Ω 0 V 11.0 ma. ma,0 Ω DC V ma. Ω 1% min. of rated 1 V 11 ma 10 Ω voltage V. ma 0 Ω V.1 ma 1,10 Ω 100 V 1. ma,0 Ω 110 V 1. ma,0 Ω Note: 1. The rated current and coil resistance are measured at a coil temperature of C with tolerances of +1%/ 0% for AC rated current and ±1% for DC coil resistance.. Performance characteristic data are measured at a coil temperature of C.. The maximum voltage is one that is applicable instantaneously to the Relay coil at C and not continuously.. For DC-operated Relays with the LED indicator built-in, add an LED current of approx. ma to the rated current. Contact Ratings Max. voltage 110% of rated voltage Power consumption Approx.. VA at 0 Hz Approx.. VA at 0 Hz Approx. 1. W Load Resistive load (cosφ = 1) Contact mechanism Single Contact material AgSnIn Rated load NO 10 A, 0 VAC 10A, 0 VDC NC A, 0 VAC A, 0 VDC Rated carry current 10 A Max. switching voltage 0 VAC, 0 VDC Max. switching current 10 A Max. switching power NO,00 VA/00 W NC 1,0 VA/10 W Inductive load (cosφ = 0.) A, 0 VAC General-purpose Relays MK-S New Model

4 Characteristics Contact resistance Operate time Release time Max. operating frequency Insulation resistance Dielectric strength Insulation method Impulse withstand voltage Note: 1. The values given above are initial values.. P level: λ0 = /operation. Ambient temperature of models with LED indicator is to 0 C. Approved Standards UL0 (File No. E11) CSA Standard: CSA Certification by : CSA C. No. 1 Note: Applications have been submitted for UL and CSA certification for models with built-in LED indicators. Engineering Data Reference Data 100 mω max. AC: 0 ms max. DC: 0 ms max. 0 ms max.(0 ms max. for built-in Diode Relays) Mechanical: 1,000 operations/h Electrical: 1,00 operations/h (under rated load) 100 MΩ min. (at 00 VDC),00 VAC 0/0 Hz for 1 min between coil and contacts 1,000 VAC 0/0 Hz for 1 min between contacts of same polarity and terminals of the same polarity,00 VAC 0/0 Hz for 1 min between current-carrying parts, non-current-carrying parts, and opposite polarity Basic insulation. kv between coil and contacts (with 1. 0 µs impulse wave).0 kv between contacts of different polarity (with 1. 0 µs impulse wave) Pollution degree Rated insulation voltage 0 V Vibration resistance Destruction: 10 to to 10 Hz, 0.-mm single amplitude (1.-mm double amplitude) Malfunction: 10 to to 10 Hz, 0.-mm single amplitude (1.0-mm double amplitude) Shock resistance Destruction: 1,000 m/s (approx. 100 G) Malfunction: 100 m/s (approx. 10 G) Endurance Mechanical:,000,000 operations min. (at 1,000 operations/h under rated load) Electrical: 100,000 operations h. (at 1,00 operations/h under rated load) Failure rate P level (reference value) 10 ma at 1 VDC Ambient temperature Operating: 0 to 0 C (with no icing or condensation) Ambient humidity Operating: % to % Weight Approx. 0 g Coil ratings Contact ratings Operations to 110 VDC N.O. 10 A, 0 V AC 0/0 Hz (Resistive),000 to 0 VAC contact 10 A, 0 V DC (Resistive) A, 0 V AC 0/0 Hz (General Use) N.C. A, 0 V AC 0/0 Hz (Resistive),000 contact A, 0 V DC (Resistive) A, 0 V AC 0/0 Hz (General Use) Maximum Switching Power IEC Standard/TUV Certification: IEC110-1 (Certification No. R010) Coil ratings Contact ratings Operations, 1,,, 100, 110 VDC, 1,, 100, 110, 00, 0, 0 VAC N.O. 10 A, 0 V AC 0/0 Hz (Resistive) 100,000 contact 10 A, 0 V DC (Resistive) A, 0 V AC 0/0 Hz (General Use) N.C. A, 0 V AC 0/0 Hz (Resistive) 100,000 contact A, 0 V DC (Resistive) A, 0 V AC 0/0 Hz (General Use) Note: When Relays are mounted on the PF0A-E or PF11A-E, the maximum carrying current is A. Rated Carry Current vs. Ambient Rated Temperature Switching current (A) DC resistive load with NO contact AC resistive load with NO contact Rated carry current (A) 10 UL derating curve 10 DC resistive load with NC contact AC resistive load with NC contact AC inductive load (cosφ = 0.) Switching voltage (V) Ambient temperature ( C) Note: The lower limit of the ambient operating temperature for models with built-in operation indicators is C. General-purpose Relays MK-S New Model

5 Dimensions Note: All units are in millimeters unless otherwise indicated. out Test Button Lockable Test Button. max.. max.. max. 0.. max.. max. 0.. max. Sockets See below for Socket dimensions. Socket Surface-mounting Socket (for track or screw mounting) Finger-protection models --- Maximum carry current 10 A A poles PF0A-E PF0A-D PF0A poles PF11A-E PF11A-E-D PF11A Note: Use the Surface-mounting Sockets (i.e., finger-protection models) with "-E" at the end of the model number. When using the PF0A and PF11A, be sure not to exceed the Socket's maximum carry current of A. Using at a current exceeding A may lead to burning. Round terminals cannot be used for finger-protection models. Use Y-shaped terminals. PF0A-E (Conforming to EN 00) Terminal Arrangement Eight, M. sems PF11A-E (Conforming to EN 00) Eleven, M. sems Terminal Arrangement max.. max.. 1 max.. 1 max. Mounting Holes Two, M or two.-dia. holes. max.. 1 max. Mounting Holes Two, M or two.-dia. holes ±0. ±0. General-purpose Relays MK-S New Model

6 PF0A-D PF11A-D. Terminal Arrangement 1 1. Terminal Arrangement 1 1 Eight, M screws A A1 Eight, M screws 10 A 11 1 A1 1 Mounting Holes Two, M or two.-dia. hole Mounting Holes Two, M or two.-dia. hole 0 0 Hold-down Clips PFC-A1 ( pieces per set). 0.. Mounting Tracks PFP-100N, PFP-0N (Conforming to EN 00) PFP-100N (Conforming to EN 00)..±0.1 ±0. ±0.1. ± * (00)* ± 1 1. * This dimension applies to the PFP-0N Mounting Track. * A total of twelve. elliptic holes is provided with six holes cut from each track end at a pitch of 10 mm. Mounting Height with Sockets Surface-mounting Sockets. (See note.) Two poles.. (See note.) Three poles. PF0A(-E) PF11A(-E) Note: PF0A(-E) and PF11A(-E) allow either track or screw mounting. General-purpose Relays MK-S New Model

7 Terminal Arrangement/Internal Connection (Bottom View) Standard Models (AC/DC Coil) MKSP(I) MKSP(I)- MKSP(I) MKSP(I)- MKSP(I)- 1 1 LED Indicator (AC Coil) MKSP(I)N MKSP(I)N- MKSP(I)N MKSP(I)N- MKSP(I)N- 1 1 Diode (DC Coil: Standard Polarity) MKSP(I)N MKSP(I)N- MKSP(I)N MKSP(I)N- MKSP(I)N- 1 1 LED Indicator and DIode (DC Coil: Reverse Polarity) MKSP(I)N1 MKSP(I)N1- MKSP(I)N1 MKSP(I)N1- MKSP(I)N1-1 1 Standard Models (DC Coil: Standard Polarity) MKSP(I)-D MKSP(I)-D- MKSP(I)-D MKSP(I)-D- MKSP(I)-D- 1 1 Diode (DC Coil: Reverse Polarity) MKSP(I)1-D MKSP(I)1-D- MKSP(I)1-D MKSP(I)1-D- MKSP(I)1-D- 1 1 LED indicator (DC Coil) MKSP(I)N-D MKSP(I)N-D- MKSP(I)N-D MKSP(I)N-D- MKSP(I)N-D- 1 1 General-purpose Relays MK-S New Model

8 Varistor (AC Coil) MKSP(I)-V MKSP(I)-V- MKSP(I)-V MKSP(I)-V- MKSP(I)-V- 1 1 LED indicator and Varistor (AC Coil) MKSP(I)N-V MKSP(I)N-V- MKSP(I)N-V MKSP(I)N-V- MKSP(I)N-V- 1 1 Safety Precautions Safety Precautions for Correct Use Installation Mount the MK-S with the marking at the bottom. Handling Check the coil polarity of models with built-in diodes and wire them correctly (DC operation coil). Test Button Do not use the test button for any purpose other than testing. Be sure not to touch the test button accidentally as this will turn the contacts ON. Before using the test button, confirm that circuits, the load, and any other connected item will operate safely. Check that the test button is released before turning ON relay circuits. If the test button is pulled out too forcefully, it may bypass the momentary testing position and go straight into the locked position. Use an insulated tool when you operate the test button. test buttons or LED indicators fulfill the requirements for reinforced insulation between live parts and the front of cover only when the Relay is in a complete condition, i.e. with the nameplate, nameplate frame, test button, and slider in place. If any of these parts are removed, only the requirements for basic insulation are fulfilled. General-purpose Relays MK-S New Model

9 General-purpose Relays MK-S New Model

10 10 General-purpose Relays MK-S New Model

11 General-purpose Relays MK-S New Model 11

12 Warranty and Application Considerations Read and Understand this Catalog Please read and understand this catalog before purchasing the products. Please consult your OMRON representative if you have any questions or comments. Warranty and Limitations of Liability WARRANTY OMRON's exclusive warranty is that the products are free from defects in materials and workmanship for a period of one year (or other period if specified) from date of sale by OMRON. OMRON MAKES NO WARRANTY OR REPRESENTATION, EXPRESS OR IMPLIED, REGARDING NON-INFRINGEMENT, MERCHANTABILITY, OR FITNESS FOR PARTICULAR PURPOSE OF THE PRODUCTS. ANY BUYER OR USER ACKNOWLEDGES THAT THE BUYER OR USER ALONE HAS DETERMINED THAT THE PRODUCTS WILL SUITABLY MEET THE REQUIREMENTS OF THEIR INTENDED USE. OMRON DISCLAIMS ALL OTHER WARRANTIES, EXPRESS OR IMPLIED. LIMITATIONS OF LIABILITY OMRON SHALL NOT BE RESPONSIBLE FOR SPECIAL, INDIRECT, OR CONSEQUENTIAL DAMAGES, LOSS OF PROFITS, OR COMMERCIAL LOSS IN ANY WAY CONNECTED WITH THE PRODUCTS, WHETHER SUCH CLAIM IS BASED ON CONTRACT, WARRANTY, NEGLIGENCE, OR STRICT LIABILITY. In no event shall the responsibility of OMRON for any act exceed the individual price of the product on which liability is asserted. IN NO EVENT SHALL OMRON BE RESPONSIBLE FOR WARRANTY, REPAIR, OR OTHER CLAIMS REGARDING THE PRODUCTS UNLESS OMRON'S ANALYSIS CONFIRMS THAT THE PRODUCTS WERE PROPERLY HANDLED, STORED, INSTALLED, AND MAINTAINED AND NOT SUBJECT TO CONTAMINATION, ABUSE, MISUSE, OR INAPPROPRIATE MODIFICATION OR REPAIR. Application Considerations SUITABILITY FOR USE OMRON shall not be responsible for conformity with any standards, codes, or regulations that apply to the combination of products in the customer's application or use of the products. Take all necessary steps to determine the suitability of the product for the systems, machines, and equipment with which it will be used. Know and observe all prohibitions of use applicable to this product. NEVER USE THE PRODUCTS FOR AN APPLICATION INVOLVING SERIOUS RISK TO LIFE OR PROPERTY WITHOUT ENSURING THAT THE SYSTEM AS A WHOLE HAS BEEN DESIGNED TO ADDRESS THE RISKS, AND THAT THE OMRON PRODUCTS ARE PROPERLY RATED AND INSTALLED FOR THE INTENDED USE WITHIN THE OVERALL EQUIPMENT OR SYSTEM. Disclaimers PERFORMANCE DATA Performance data given in this catalog is provided as a guide for the user in determining suitability and does not constitute a warranty. It may represent the result of OMRON's test conditions, and the users must correlate it to actual application requirements. Actual performance is subject to the OMRON Warranty and Limitations of Liability. CHANGE IN SPECIFICATIONS Product specifications and accessories may be changed at any time based on improvements and other reasons. Consult with your OMRON representative at any time to confirm actual specifications of purchased product. DIMENSIONS AND WEIGHTS Dimensions and weights are nominal and are not to be used for manufacturing purposes, even when tolerances are shown. ALL DIMENSIONS SHOWN ARE IN MILLIMETERS. To convert millimeters into inches, multiply by 0.0. To convert grams into ounces, multiply by 0.0. Cat. No. J1-E1-01 OMRON Corporation Industrial Automation Company In the interest of product improvement, specifications are subject to change without notice. Control Devices Division H.Q. Shiokoji Horikawa, Shimogyo-ku, Kyoto, 00-0 Japan Tel: (1)--10/Fax: (1)--1 Printed in Japan????-?M (????) (?)