56 FRAME & 56C FRAME FRACTIONAL MOTORS From WorldWide Electric
|
|
- Lambert Hutchinson
- 7 years ago
- Views:
Transcription
1 56 FRAME & FRAME FRACTIONAL MOTORS From WorldWide Electric Suitable For All General-Purpose Applications Motors Single-Phase and Three-Phase Pages Motors Three-Phase Page 3 Stainless Steel / Washdown Duty Motors Three-Phase Page 4-5 Permanent Magnet DC Motors and Controls Pages 6-7 WorldWide Electric Corporation P.O. Box 307, Pittsford, NY 4534 USA Phone: Fax:
2 FRAME MOTORS Single-Phase - TEFC Enclosure With manual overload Without overload /3-2 HP and RPM volt TEFC enclosure Removable bolt-on / bolt-off base Capacitor start / induction run (/3 - HP) Capacitor start / capacitor run ( - 2 HP) for reduced amperage and high torque Shaft slinger to keep moisture and contaminants from the drive-end bearing Available with or without manual overload 230 V 230 V /3 T3-8-B-OL $ /2 T2-8-B-OL $ T34-8-B-OL $ T-8-B-OL $ T-8-B-OL $ T2-8-B-OL $ V 230 V /3 /2 2 TJ3-36-B-NOL T3-8-B TJ2-36-B-NOL T2-8-B TJ34-36-B-NOL T34-8-B TJ-36-B-NOL T-8-B TJ-36-B-NOL T-8-B TJ2-36-B-NOL T2-8-B $92.9 $29.82 $29.43 $23.6 $232.5 $ $ $28.25 $37.50 $355.8 $ $ * s Seen Here Are List - Please Call For Your Multiplier
3 FRAME MOTORS Three-Phase - TEFC Enclosure /3-2 HP and RPM and 575 volt TEFC enclosure Removable bolt-on / bolt-off base Shaft slinger to keep moisture and contaminants from the drive-end bearing Inverter duty Suitable for 50 hz operation with.0 service factor volt /3 /2 2 ATJ3-36-B AT3-8-B ATJ2-36-B AT2-8-B ATJ34-36-B AT34-8-B ATJ-36-B AT-8-B ATJ-36-B AT-8-B ATJ2-36-B AT2-8-B $84. $ $92.27 $22.98 $ $ $ $ $ $326.6 $ $ volt 575 V 575 V /3 575 AT B $ /2 575 AT B $ AT B $ AT B $ AT B $ AT B $ * s Seen Here Are List - Please Call For Your Multiplier - 2 -
4 56 FRAME MOTORS Three-Phase - TEFC Enclosure /3-2 HP RPM and 575 volt TEFC enclosure Rigid base Shaft slinger to keep moisture and contaminants from the drive-end bearing Inverter duty Suitable for 50 hz operation with.0 service factor volt /3 56 AT $ /2 56 AT $ AT $ AT-8-56 $ AT-8-56 $ AT $ volt 575 V 575 V / AT $ / AT $ AT $ AT $ AT $ AT $ * s Seen Here Are List - Please Call For Your Multiplier
5 STAINLESS STEEL / WASHDOWN DUTY MOTORS Three-Phase - TENV Enclosure Rigid base /3 - HP RPM volt TENV enclosure C-face - rigid base and round body Double lip seals with an additional shaft slinger on the drive-end O-rings installed on endbells to eliminate moisture Inverter duty Suitable for 50 hz operation with.0 service factor /3 WSSNV3-8-B $ /2 WSSNV2-8-B $ WSSNV34-8-B $ WSSNV-8-B $ Round body /3 WSSNV3-8-RD $ /2 WSSNV2-8-RD $ WSSNV34-8-RD $ WSSNV-8-RD $ * s Seen Here Are List - Please Call For Your Multiplier - 4 -
6 STAINLESS STEEL / WASHDOWN DUTY MOTORS Three-Phase - TEFC Enclosure Rigid base Round body /3-2 HP and RPM volt TEFC enclosure C-face - rigid base and round body Double lip seals on both ends of the motor with an additional shaft slinger on the drive-end O-rings installed on endbells to eliminate moisture Inverter duty Suitable for 50 hz operation with.0 service factor /3 WSS3-8-RD $ /2 WSS2-8-RD $ WSS34-8-RD $ WSS-8-RD $ WSS-8-RD $ WSS2-8-RD $ /3 WSS3-8-B $ /2 2 WSS2-36-B WSS2-8-B WSS34-36-B WSS34-8-B WSS-36-B WSS-8-B WSS-36-B WSS-8-B WSS2-36-B WSS2-8-B $ $58.82 $596.8 $ $6.33 $ $ $7.03 $ $ * s Seen Here Are List - Please Call For Your Multiplier
7 PERMANENT MAGNET DC MOTORS volt and volt /4-2 HP RPM,, 2 and volt TENV enclosure (/4 - /2 HP) TEFC enclosure ( - 2 HP).0 service factor Removable bolt-on / bolt-off base 20: speed range at constant torque High starting torque Extra set of brushes and brush springs included 2 volt and volt models used in applications where low voltage DC power is supplied by batteries or generators Armature /4 WPMDC4-8-V-B $ /3 /2 2 2 volt and volt /3 / TC 45TC WPMDC3-8-V-B WPMDC3-8-V-B WPMDC2-8-V-B WPMDC2-8-V-B WPMDC34-8-V-B WPMDC34-8-V-B WPMDC-8-V-B WPMDC-8-V-B WPMDC-8-V-B WPMDC-8-V-B WPMDC-8-V-45TCB WPMDC2-8-V-B WPMDC2-8-V-45TCB WPMDC3-8-2V-B WPMDC3-8-V-B WPMDC2-8-2V-B WPMDC2-8-V-B WPMDC34-8-2V-B WPMDC34-8-V-B WPMDC-8-2V-B WPMDC-8-V-B $294 $ $ $ $ $ $ $ $52.9 $507.8 $ $82.5 $, $ $ $40.69 $408.5 $ $ $57.87 $ Armature WPMDC-8-V-B $ * s Seen Here Are List - Please Call For Your Multiplier - 6 -
8 PERMANENT MAGNET DC MOTORS Variable Speed DC Controls Dual voltage - 20/0 VAC, 50/60 hz Adjustable horsepower settings Barrier terminal strip Packaged bridge supply (fullwave) % speed regulation with armature voltage feedback; ± /2% with tach feedback Adjustable minimum speed (0-30% of max.) Adjustable maximum speed (66-0% of base) Adjustable IR compensation Adjustable linear acceleration (0.5-8 sec.) Adjustable current limit to 5 amps Line voltage compensation 5K ohm speed potentiometer with leads, knob and dial included Power on / off switch 50: speed range Overload capacity: 50% for one minute Transient voltage protection Voltage following mode or DC tachometer follower by supplying underground analog input signal (0-2 VDC) DC tachometer feedback (6 V at base speed) Inhibit circuit - permits start and stop without breaking AC lines Remote start/stop via pot circuit or inhibit circuit Shunt field supply provided ( amp max.; 00 V for 20 VAC; 200 V for 0 VAC input) AC line fuse Rated 4/2 with threaded conduit holes Non-Reversing (ON / OFF) Single-Phase Input Output HP Range 20 VAC 0- VDC /8 -.0 WDCCONT $ VAC 0- VDC /4-2.0 WDCCONT $ Reversing (FORWARD / OFF / REVERSE) Single-Phase Input Output HP Range 20 VAC 0- VDC /8 -.0 WDCCONTREV $ VAC 0- VDC /4-2.0 WDCCONTREV $ * s Seen Here Are List - Please Call For Your Multiplier
Fractional to 2 HP DC Drives for Both Non-Regenerative and Regenerative Applications
DC3 DC Drives Fractional to 2 HP DC Drives for Both Non-Regenerative and Regenerative Applications The Reliance Electric DC3 family of drives provides cost-effective variable speed control and operates
More informationKBIC Solid State SCR DC Motor Speed Controls See table 2 page 4 for KBIC models covered by this manual
KBIC Solid State SCR DC Motor Speed Controls See table 2 page 4 for KBIC models covered by this manual Patented Ultra Fast CL Circuit Prevents Demagnetization in PM Motors Installation and Operating Instructions
More informationDC MOTORS NEMA FRAME SCR RATED
NEMA FRAME SCR RATED NEMA FRAME MOTORS SCR RATED High voltage permanent magnet DC motors are typically used with an SCR (thyristor) controller in applications requiring adjustable speed and constant torque
More informationAC Motor Speed. n s = synchronous speed (in RPM), f = frequency (in Hz), and p = the number of poles
AC Induction Motors Simplest and most rugged electric motor Consists of wound stator and rotor assembly AC in the primary member (stator) induces current in the secondary member (rotor) Combined electromagnetic
More informationAugust 2004. www.danahermotion.com SECO DC DRIVES. Table of Contents
SECO DC DRIVES SECO AC/DC DC Drives DRIVES Table of Contents August 2004 www.danahermotion.com Tel : 800 554 8466 Web site : www.danahermotion.com Mechanical and Electro-Mechanical Product Solutions by
More informationInstallation and Operating Manual
DC DRIVE BC138 BC139 DC CONTROL Installation and Operating Manual 7/2001 MN708 TABLE OF CONTENTS Section Page i. Simplified Operating Instructions.......................................... 1 ii. Safety
More informationVARI-DRIVE NEMA1 / IP20 SCR Variable Speed DC Motor Controls
TM TM INSTALLATION AND OPERATING INSTRUCTIONS VARI-DRIVE NEMA1 / IP20 SCR Variable Speed DC Motor Controls Model KBWM-120 rated 1/100-1/3 HP (90 Volts DC) @ 115 Volts AC, 50/60 Hz Model KBWM-240 rated
More informationLEESON ELECTRIC CORPORATION GRAFTON, WI 53024-0241 U.S.A. TELEPHONE (262)377-8810 FAX (262)377-9025
TM SPEEDMASTER Variable Speed D.C. Control INSTRUCTION MANUAL TM This Book Covers Speedmaster Control Numbers 174902 & 174903 LEESON ELECTRIC CORPORATION GRAFTON, WI 53024-0241 U.S.A. TELEPHONE (262)377-8810
More informationWhat is a multimeter?
What is a multimeter? A multimeter is a devise used to measure voltage, resistance and current in electronics & electrical equipment It is also used to test continuity between to 2 points to verify if
More informationSECTION 4 ELECTRIC MOTORS UNIT 17: TYPES OF ELECTRIC MOTORS
SECTION 4 ELECTRIC MOTORS UNIT 17: TYPES OF ELECTRIC MOTORS UNIT OBJECTIVES After studying this unit, the reader should be able to Describe the different types of open single-phase motors used to drive
More informationSpecifying a Variable Frequency Drive s
Specifying a Variable Frequency Drive s Put on by Bruce Reeves and Jeremy Gonzales Dykman Electrical Covering the Western US For all of your VFD and Soft Start and Motor Needs How To Specify a Variable
More informationTorqPlus TM Electric Valve Actuators and Controls
TorqPlus TM Electric Valve Actuators and Controls Torque 150 IN/LB 600 IN/LB The Engineered Solution Bettis TorqPlus quality line of electric actuators are designed for quarter turn applications ball,
More informationA1000 Cheat Sheet (Open Loop Vector)
A1000 Cheat Sheet (Open Loop Vector) The following procedure is a supplement to supplied with this equipment and will guide the user in properly wiring the A1000 and. It will also show the user how to
More informationWe will discuss common industrial applications with guides for the proper use of electric motors on these.
INTRODUCTION: Baldor Electric Company has prepared this Specifiers Guide to help you cover all the bases when you are specifying electric motors. It will cover in a generic way most of the subjects which
More informationInstallation and Operating Manual
PWM DRIVE BC354 PWM DC MOTOR SPEED CONTROL Installation and Operating Manual 10/2000 MN731 TABLE OF CONTENTS Section Page i. Safety Warning....................................................... 1 I. Introduction..........................................................
More informationUNIVERSITY OF WATERLOO ELECTRICAL & COMPUTER ENGINEERING DEPARTMENT ME269 ELECTROMECHANICAL DEVICES AND POWER PROCESSING.
UNIVERSITY OF WATERLOO ELECTRICAL & COMPUTER ENGINEERING DEPARTMENT ME269 ELECTROMECHANICAL DEVICES AND POWER PROCESSING. Group # First Name Last Name UserID @uwaterloo.ca Experiment #3: DIRECT CURRENT
More informationINTRODUCTION TO RATIOTROL
GEAROLOGY 8-1 8 8-2 GEAROLOGY INTRODUCTION Modern industrial processes require operating speeds that maximize production, profit and quality. Today, these speeds can be achieved through mechanical power,
More informationKBPC-240D (Part Nos. 9338 and 9342) Installation and Operation Manual Supplement
The Right Control for Your Application. 12095 NW 39 Street, Coral Springs, FL 33065-2516 Telephone: 954-346-4900; Fax: 954-346-3377 KB Electronics, Inc. www.kbelectronics.com KBPC-240D (Part Nos. 9338
More informationWelcome to Linear Controls Quarterly Training
Welcome to Linear Controls Quarterly Training Introduction to Power Generation Objectives Supply attendees with basic knowledge of power generators and voltage regulators and provide the fundamentals of
More informationAC Kinetics Variable Frequency Drive Comparative Transient Inertial Testing. This document was prepared by Advanced Energy.
AC Kinetics Variable Frequency Drive Comparative Transient Inertial Testing This document was prepared by Advanced Energy. December 12 th, 2014 Introduction In June of this year, AC Kinetics contacted
More informationInstallation and Operating Manual
REGEN DRIVE BC254 REGEN DC MOTOR SPEED CONTROL Installation and Operating Manual 3/2001 MN730 TABLE OF CONTENTS Section Page i. Simplified Operating Instructions..........................................
More informationMotors and Generators
Motors and Generators Electro-mechanical devices: convert electrical energy to mechanical motion/work and vice versa Operate on the coupling between currentcarrying conductors and magnetic fields Governed
More informationSAFETY PRECAUTIONS AND INSTRUCTIONS FOR USE OF TECHNICAL INFORMATION
SAFETY PRECAUTIONS AND INSTRUCTIONS FOR USE OF TECHNICAL INFORMATION Please read and understand the product instruction manual before installing, servicing or operating Yaskawa products. Technical content
More informationFlexPak 3000 Digital DC Drive Software Reference Manual Version 4.3
FlexPak 3000 Digital DC Drive Software Reference Manual Version 4.3 Instruction Manual D2-3405-2 The information in this manual is subject to change without notice. Throughout this manual, the following
More information3FBD DC Motor Drive User Manual
3FBD DC Motor Drive User Manual Via I. Alpi 6 - zona industriale - Lonato (BS) Tel. +39 30 9913491 r.a. Fax. +39 30 9913504 http://www.re-elettronica.it info@re-elettronica.it Pag. 1 Index Index... pag.1
More informationWhat Is Regeneration?
What Is Regeneration? Braking / Regeneration Manual Regeneration Overview Revision 1.0 When the rotor of an induction motor turns slower than the speed set by the applied frequency, the motor is transforming
More informationDirect Current Motors
Direct Current Motors DC MOTORS The DC machine can operate as a generator and as a motor. Chap 5. Electrical Machines by Wildi, 6 e Lecturer: R. Alba-Flores Alfred State College Spring 2008 When a DC machine
More information3753 en - 04.2004/b VE/B - VE/RG Va V riable speed drives
3753 en 04.2004/b Variable speed drives LEROYSOMER's drives provide SPEED VARIATION for a DC motor, SIMPLY and ECONOMICALLY from a singlephase power supply. CMStype technology is used. These products conform
More informationGLOLAB Two Wire Stepper Motor Positioner
Introduction A simple and inexpensive way to remotely rotate a display or object is with a positioner that uses a stepper motor to rotate it. The motor is driven by a circuit mounted near the motor and
More informationSynchronous motor. Type. Non-excited motors
Synchronous motor A synchronous electric motor is an AC motor in which the rotation rate of the shaft is synchronized with the frequency of the AC supply current; the rotation period is exactly equal to
More informationRotary Phase Converters
FACTS from Ronk Electrical Industries, Inc. Bulletin 11981 Rotary Phase Converters ROTOVERTER Pat. No. 3,670,238 ROTO-CON Pat. No. 4,158,225 What are the ROTO-CON and ROTOVERTER power converters? The ROTO-CON
More informationETZGAR CONVEYOR COMPANY Controls Section v12.05
Section 7 Controls Page Description 7-1 Controls Index 7-2 Motor Data, Enclosure Rating and Abbreviations 7-3 Controls Safety Guidelines 7-4 Fixed Speed Controls Packages 7-5 Three Phase AC Variable Speed
More informationPermanent Magnet DC Motors
typical applications Robotics and factory automation Pick-and-place robots Positioning tables Welding wire feeders Automatic guided vehicles Barcoding equipment Computer and office equipment Copier and
More informationTechnical Guide No. 100. High Performance Drives -- speed and torque regulation
Technical Guide No. 100 High Performance Drives -- speed and torque regulation Process Regulator Speed Regulator Torque Regulator Process Technical Guide: The illustrations, charts and examples given in
More informationEET272 Worksheet Week 9
EET272 Worksheet Week 9 answer questions 1-5 in preparation for discussion for the quiz on Monday. Finish the rest of the questions for discussion in class on Wednesday. Question 1 Questions AC s are becoming
More informationAC Servo Motors and Servo Rated Gearheads
AC Servo Motors and Servo Rated Gearheads for the automation industry Courtesy of Steven Engineering, Inc.-23 Ryan Way, South San Francisco, CA 948-637-Main Office: (65) 588-92-Outside Local Area: (8)
More informationAnalog Servo Drive 25A8
Description Power Range NOTE: This product has been replaced by the AxCent family of servo drives. Please visit our website at www.a-m-c.com or contact us for replacement model information and retrofit
More informationCentro-Matic Automatic Lubrication Systems System Controls
Selecting the right controls for your automated lubrication system is one of the last steps in the design process. Several different models may be chosen to control power-operated pumps, depending on the
More informationEVER EFFICIENT. EVER RELIABLE. EVER PROFITABLE.
EVER EFFICIENT. EVER RELIABLE. EVER PROFITABLE. A Regal Brand EVERGREEN SOLUTIONS Powered by ECM Technology Upgrade/Replace PSC motors with Evergreen IM Residential/Light Commercial HVAC Systems Reduce
More informationAutomatic Voltage Regulator User s Manual
Resp. dept. R&D We reserve all rights in this document and in the information contained therein. Reproduction, use or disclosure to third parties without express authority is strictly forbidden. Copyright
More informationREVIEWED BY CAPITAL PROJECTS MANAGER (DAN REDDY) GENERAL MANAGER EQUIPMENT ENGINEERING & ASSET MANAGEMENT (HAMILTON NXUMALO)
SA Port Operations DOCUMENT TYPE: REFERENCE EEAM-Q-014 (ORIGINAL SPECIFICATION HE8.2.3 Ver5) REVISION 0 SPECIFICATION TITLE: SPECIFICATION FOR ELECTRICAL MOTORS AND GENERATORS PAGE 0 of 07 COMPILED BY
More informationProduct Guide AC Voltage Control Devices. Guide Guide. Popular Variable Transformers and AC Power Supplies. www.stacoenergy.com
Popular Variable Transformers and AC Power Supplies Product Guide AC Voltage Control Devices Guide Guide Your Tailored Power Solutions Provider TM Staco Energy Products Co. has been a leading manufacturer
More informationWHITE PAPER. DC Motors Explained. DC Motors Explained: White Paper, Title Page
DC Motors Explained: White Paper, Title Page DC Motors Explained By Joe Kimbrell, Product Manager, Drives, Motors & Motion, AutomationDirect DC Motors Explained: White Paper, pg. 2 How many types of DC
More informationMR221-MR222 Heavy Duty Geared Limit Switches, CE Approved
MR221-MR222 Heavy Duty Geared Limit Switches, CE Approved MICRONOR automation components Product MICRONOR MR221 and MR222 series Heavy Duty Geared Limit Switches are for use in the most demanding industrial
More informationSolving VFD-sourced Bearing Current Problems in AC Motors.
Solving VFD-sourced Bearing Current Problems in AC Motors. The 2 main sources of motor shaft voltage are: 1. Asymmetric Motor construction The stator and rotor magnetic circuits within the motor itself
More informationPump Specifications 405 Series Commercial Drain Pump (High-Temp) 2 Solids handling
Pump Specifications 405 Series Commercial Drain Pump (High-Temp) 2 Solids handling 405_P1 R1/27/2012 Copyright 2012 Liberty Pumps Inc. All rights reserved. Specifications subject to change without notice.
More informationSFS81 Series. Servo Finishing Stand PUSHCORP, INC. Dallas, Texas
SFS81 Series Servo Finishing Stand PUSHCORP, INC. Dallas, Texas May, 2012 NEVER OPERATE THE SFS81 MANUALLY NEVER OPERATE THE SFS81 WITH PERSONEL IN THE WORKCELL DO NOT USE LUBRICATED AIR. This device requires
More informationSUBJECT: How to wire a motor starter Number: AN-MC-004 Date Issued: 2/08/2005 Revision: Original
SUBJECT: How to wire a motor starter Number: AN-MC-004 Date Issued: 2/08/2005 Revision: Original A motor starter is a combination of devices to allow an induction motor to start, run and stop according
More information2. A conductor of length 2m moves at 4m/s at 30 to a uniform magnetic field of 0.1T. Which one of the following gives the e.m.f. generated?
Extra Questions - 2 1. A straight length of wire moves through a uniform magnetic field. The e.m.f. produced across the ends of the wire will be maximum if it moves: a) along the lines of magnetic flux
More informationΩ POWEROHM RESISTORS, INC. Braking Resistors for Variable Frequency Drives APPLICATION SELECTING A STANDARD DESIGN CUSTOM RATINGS
Braking Resistors for Variable Frequency Drives APPLICATION AC variable frequency drives are commonly used with a general purpose AC induction motor to form a reliable variable speed drive system. For
More informationCONSTRUCTION STANDARDS DIVISION 23 HEATING VENTILATING AND AIR CONDITIONING
PART 1-GENERAL 1.01 DESCRIPTION A. This specification is to cover a complete Variable Frequency motor Drive (VFD) consisting of a pulse width modulated (PWM) inverter designed for use on a standard NEMA
More informationAC Replacement for DC Mill-Duty Motors
AC Replacement for DC Mill-Duty Motors This article is available online at www.aist.org for 30 days following publication. For many years, DC mill auxiliary motors for steel mill applications such as screwdowns,
More informationApplication Information
Moog Components Group manufactures a comprehensive line of brush-type and brushless motors, as well as brushless controllers. The purpose of this document is to provide a guide for the selection and application
More informationAC ADJUSTABLE SPEED DRIVES MICRO SERIES INVERTERS
MICRO SERIES INVERTERS MICRO SERIES INVERTER DRIVES Full feature, ultra-friendly operation. Programs and reads-out in plain English. Intelligent Power Module-IGBT s with a 16 bit Intel microprocessor.
More informationPS4-24 OWNERS MANUAL 24 VAC 90 WATT WALL MOUNTED CCTV POWER SUPPLY
PS4-24 OWNERS MANUAL 24 VAC 90 WATT WALL MOUNTED CCTV POWER SUPPLY 7320 Ashcroft, Suite 104 Houston, Texas 77081 p: 713-772-1404 f: 713-772-7360 e: info@juicegoose.com www.juicegoose.com 06-06 CONGRATULATIONS
More informationLab 8: DC generators: shunt, series, and compounded.
Lab 8: DC generators: shunt, series, and compounded. Objective: to study the properties of DC generators under no-load and full-load conditions; to learn how to connect these generators; to obtain their
More informationRectifier filter stage post filtering sense
TopCon DC power supplies Customer support files Nr. 042.0208.016_e Topic: Protecting the DC output 1. Abstract TopCon DC power supplies are generally well suited for operation into reactive DC loads. Reactive
More informationPrinciples of Adjustable Frequency Drives
What is an Adjustable Frequency Drive? An adjustable frequency drive is a system for controlling the speed of an AC motor by controlling the frequency of the power supplied to the motor. A basic adjustable
More informationEquipment: Power Supply, DAI, Synchronous motor (8241), Electrodynamometer (8960), Tachometer, Timing belt.
Lab 9: Synchronous motor. Objective: to examine the design of a 3-phase synchronous motor; to learn how to connect it; to obtain its starting characteristic; to determine the full-load characteristic of
More informationAC METRIC (IEC) MOTORS THREE PHASE
AC METRIC MOTORS These high efficiency motors meet North American performance standards and EPACT energy efficiency mandates, and have.5 service factors. Typically used for replacement on machine tools,
More informationPhase-Control Alternatives for Single-Phase AC Motors Offer Smart, Low-Cost, Solutions Abstract INTRODUCTION
Phase-Control Alternatives for Single-Phase AC Motors Offer Smart, Low-Cost, Solutions by Howard Abramowitz, Ph.D EE, President, AirCare Automation Inc. Abstract - Single Phase AC motors continue to be
More informationVIO-VELOCITY OPERATING MANUAL
VIO-VELOCITY OPERATING MANUAL Rev 5/00 Elmo Motion Control VIO-Velocity - Operating Manual Rev 09/09. Elmo Motion Control TABLE OF CONTENTS Safety Information...1 Introduction...3 Servo Amplifier Description...5
More informationEquipment: Power Supply, DAI, Wound rotor induction motor (8231), Electrodynamometer (8960), timing belt.
Lab 13: Wound rotor induction motor. Objective: to examine the construction of a 3-phase wound rotor induction motor; to understand exciting current, synchronous speed and slip in this motor; to determine
More informationSelf Monitoring Power Supply (BPSM)
LIFETIME REPLACEMENT WARRANTY Self Monitoring Power Supply (BPSM) Application - When interfacing with a fire alarm system where the system s auxiliary relay cannot handle the full current potential of
More informationPump Specifications 250 Series Submersible Sump / Effluent Pump 2 Solids handling
Pump Specifications 250 Series Submersible Sump / Effluent Pump 2 Solids handling 250_P1 R10/7/2015 Copyright 2015 Liberty Pumps Inc. All rights reserved. Specifications subject to change without notice.
More informationSINGLE PHASE DC DRIVES
Single Phase Product Catalogue Col 4/11/08 15:29 Page 1 orld class in design orld beating in function Find out more: www.sprint-electric.com Sprint Electric Ltd Rudford Industrial Estate, Ford, Arundel,
More informationSpeed Control Motors. Speed Control Motors. Brushless Motor's Structure and Principle of Operation H-40. Structure of Brushless Motor
Speed Control Speed Control Brushless Motor's Structure and Principle of Operation Structure of Brushless Motor Ball Bearing Shaft Brushless motors have built-in magnetic component or optical encoder for
More information47000 SERIES - ELECTRONIC TRANSFORMERS
7000 SERIES - ELECTRONIC TRANSFORMERS MYRRA encapsulated electronic transformers are Switched Mode Power Supplies based on Flyback topology. They constitute an interesting alternative to the traditional
More informationAUTO CHARGE 3 STEP AUTOMATIC BATTERY CHARGER
FILE: IM_091-120-12E-20 Rev A., 05-06-08 INSTRUCTION MANUAL AUTO CHARGE 3 STEP AUTOMATIC BATTERY CHARGER R MODEL #091-120-12E-20 for ODYSSEY AGM BATTERIES CAUTION This charger is calibrated to the ODYSSEY
More informationREGAL-BELOIT. Installation and Operation Manual. Variable Speed AC Motor Drives. Micro and PowerWash Series
REGAL-BELOIT Variable Speed AC Motor Drives Micro and PowerWash Series Installation and Operation Manual Manual Number: SB184 TABLE OF CONTENTS 1.0 GENERAL................................................1
More informationMC1000 Series Installation and Operation Manual
MC1000 Series Installation and Operation Manual NOTE! The manual covers software version M108314 and above. Refer to parameter 63 for the software version of the drive you are working with. If you are
More informationInductance. Motors. Generators
Inductance Motors Generators Self-inductance Self-inductance occurs when the changing flux through a circuit arises from the circuit itself. As the current increases, the magnetic flux through a loop due
More informationStock and Custom AC and DC
Bulletin 1800 PRECISION SB-FHP MOTORS Stock and Custom AC and DC Precision Sub-FHP Motors Custom or Off-The-Shelf LEESON Electric is one of North America s youngest and fastest-growing motor companies.
More informationMoteurs à courant continu
Moteurs à courant continu DPP24 DPP64 DPP68 DPP7 DPP72 ELECTROCRAFT www.rosier.fr 3/11/211 page(s) 1-1 ElectroCraft DirectPower, DirectPower Plus, EA-Series & SC-Series 16 Step 2: Torque (oz-in.) 35 3
More informationWE-350 Series ¼ Turn Electric Actuator
WE-350 Series ¼ Turn Electric Actuator Operation and Installation Manual Pg 1 (Rev. 020113) Table of Contents 1.0 General 1.1 Pre-Installation Inspection 1.2 Storage 1.3 Features & General Information
More informationSECTION 26 29 23 VARIABLE FREQUENCY DRIVES
SECTION 26 29 23 VARIABLE FREQUENCY DRIVES PART 1 GENERAL 1.01 SCOPE A. Furnish and install individual freestanding variable frequency AC drives (VFD) as shown on the Drawings and specified herein. 1.02
More informationTuning Up DC Motors and Generators for Commutation and Performance
Tuning Up DC Motors and Generators for Commutation and Performance Rich Hall- National Electrical Carbon Western Mining Electrical Association June 8, 2007, Billings Montana Sometimes your machine may
More informationItem Number Description Type of Gauge Size in " Price
FARIA Euro Perimeter lighted black dial with bold white graphics, black aluminum bezel, contoured white pointer and flat fog resistant lens EURO Item Number Description Type of Gauge Size in " Price 32805
More informationPositioner Versions. Remote feed-back. Local display, Electric / Hydraulic. Remote feed-back Electric / Hydraulic. Embedded Control Positioner
Quick Stepper 3G ECP Positioner Versions Mechanical feed-back Pneumatic Remote feed-back Local display, Pneumatic Remote feed-back Local display, Electric / Hydraulic Remote feed-back Electric / Hydraulic
More informationHarmonic Drive acutator P r e c i s i o n G e a r i n g & M o t i o n C o n t r o l
D C S e r v o S y s t e m s RH Mini Series Total Motion Control Harmonic Drive acutator P r e c i s i o n G e a r i n g & M o t i o n C o n t r o l Precision Gearing & Motion Control DC SERVO ACTUATORS
More information506/507/508. Product Manual. HA389427 Issue 13. Copyright 2013 Parker Hannifin Manufacturing Ltd. WARRANTY
506/507/508 Product Manual HA389427 Issue 13 Copyright 2013 Parker Hannifin Manufacturing Ltd. All rights strictly reserved. No part of this document may be stored in a retrieval system, or transmitted
More informationMiniature High-Torque, DC Servomotors and DC Gearmotors
typical applications Robotics Factory automation Medical equipment Computer peripherals and office equipment Portable, battery-operated equipment Textile machinery Packaging machinery Actuators Miniature
More informationFan Coil EC Motor Control
Fan Coil EC Motor Control G3 PWM BARD The Enviro-Tec Generation 3 PWM (G3 PWM) board provides a pulse-width modulated (PWM) signal to the EC motor to control fan speed. The board is factory programmed
More informationIntroduction. related products. Upon completion of Basics of DC Drives you will be able to: Explain the concepts of force, inertia, speed, and torque
Table of Contents Introduction...2 Totally Integrated Automation and DC Drives...4 Mechanical Basics...6 DC Motors... 12 Basic DC Motor Operation... 15 Types of DC Motors...20 DC Motor Ratings...23 Speed/Torque
More informationVLT 6000 HVAC. Contents
Contents Introduction Safety...3 Safety Guidelines...3 Warnings Against Unintended Start...3 Introduction...4 About this manual...4 Assumptions...4 References...4 Trademarks...5 Programming the VLT 6000
More informationElectronic, Digital and Mechanical Vibration Switches
PT500 Electro-Mechanical Vibration Switch Introduction The PT500 is an economical solution that provides basic vibration protection for rotating reciprocating machines. The PT500 uses an inertia sensitive
More informationWhat Do All Those Things on an AC Motor Nameplate Mean?
What Do All Those Things on an AC Motor Nameplate Mean? Introduction: Ever order a motor on power, speed, and enclosure? PO says maybe "5 hp, 1,800 rpm, TEFC." New-motor nameplate says "HP 5, RPM 1748,
More informationWIND TURBINE TECHNOLOGY
Module 2.2-2 WIND TURBINE TECHNOLOGY Electrical System Gerhard J. Gerdes Workshop on Renewable Energies November 14-25, 2005 Nadi, Republic of the Fiji Islands Contents Module 2.2 Types of generator systems
More informationInstallation & Operation Manual Dial-A-Flow Adjustable Frequency Drives
GM 04-13 Installation & Operation Manual Dial-A-Flow Adjustable Frequency Drives for 1/8 HP thru 1HP 3-Phase AC Motors rated 208 230 VAC, 50 & 60 Hz NEMA-1 / IP-40 Operates from 115 and 208/230 Volt 50/60
More informationUM Series UniModule. Pre-assembled, C-face Clutches and Brakes. Original Design Sizes 210 & 215. GEN 2 Design Sizes 50, 100 & 180
re-assembled, C-face Clutches and Brakes UniModules offer the ultimate in Clutch/ Brake performance and convenience. UniModules offer the same performance as EM s without the assembly required. Completely
More informationSingle-Phase AC Synchronous Generator
ST Series Single-Phase AC Synchronous Generator Instructions for Operation and Maintenance English to English translation by R.G. Keen, May 2004. ST Series of Single-Phase AC Synchronous Generators Description
More informationHow to Turn an AC Induction Motor Into a DC Motor (A Matter of Perspective) Steve Bowling Application Segments Engineer Microchip Technology, Inc.
1 How to Turn an AC Induction Motor Into a DC Motor (A Matter of Perspective) Steve Bowling Application Segments Engineer Microchip Technology, Inc. The territory of high-performance motor control has
More informationOutdoor 33.6W Dual Port Passive Power-over-Ethernet Midspan For External Security Cameras and Wireless Access Points
Outdoor 33.6W Dual Port Passive Power-over-Ethernet Midspan For External Security Cameras and Wireless Access Points Features SELV Compliant No Detection Passive Injector Gigabit Compatible Full Protection
More informationDiode Applications. by Kenneth A. Kuhn Sept. 1, 2008. This note illustrates some common applications of diodes.
by Kenneth A. Kuhn Sept. 1, 2008 This note illustrates some common applications of diodes. Power supply applications A common application for diodes is converting AC to DC. Although half-wave rectification
More informationDIRECT CURRENT GENERATORS
DIRECT CURRENT GENERATORS Revision 12:50 14 Nov 05 INTRODUCTION A generator is a machine that converts mechanical energy into electrical energy by using the principle of magnetic induction. This principle
More informationR448 & R448 V50 A.V.R.
Armature + 6- This manual is to be given to the end user F1 ST5 Field Slow fuse 250V 10 A with LAM without LAM 10 Yellow 11 Red 12 Black 9 Green X2 Z1 X1 Z2 E+ E- 0V 110 22 ST3 requency ST10 50Hz 60Hz
More informationSERVICE & OPERATING MANUAL ELECTRONIC LEAK DETECTOR 032-044-000 032-045-000 WARNING 12-32 VDC
SERVICE & OPERATING MANUAL ELECTRONIC LEAK DETECTOR 032-044-000 032-045-000 } 12-32 VDC Specifications 032-044-000 and 032-045-000 WARNING Hazardous voltage. This Leak Detector is an electrical device.
More informationMasterFit. The Serviceman s Best Friend!
MasterFit The Serviceman s Best Friend! MasterFit : One Motor Replaces Many Features: Energy Efficient Different Capacitor/ Speed Combinations Designed for 370V Capacitor (not furnished) Permanent Split
More informationHM-W536 Install Guide
HM-W536 Install Guide 9/13/2013 IMPORTANT SAFETY INSTRUCTIONS Warning - When using electrical devices, basic safety precautions should be followed to reduce the risk of fire, electrical shock or injury.
More informationEquipment: Power Supply, DAI, Universal motor (8254), Electrodynamometer (8960), timing belt.
Lab 12: The universal motor. Objective: to examine the construction of the universal motor; to determine its no-load and full-load characteristics while operating on AC; to determine its no-load and full-load
More information