Milo. Innovative beam adjustment and image projection with outdoor LED spotlights

Transcription

1 Milo Innovative beam adjustment and image projection wit outdoor LED spotligts

2 We ave used patented innovations to provide designers and arcitects wit Milo, LED spotligts wit unlimited possibilities for reliable, flexible and creative effects Milo is an outdoor spotligt for ligting designers and arcitects wo require a compact projector. It is ideal for areas wit limited space but is powerful enoug to project up to 10 metres. Available in five colours, Milo uses LED tecnology combined wit a patented optical system wic allows te beam to be adjusted from intensive to extensive, using just a simple tool. Milo: te compact, creative system tat enables designers to define and re-invent sapes wit ligt. Patrick Rimoux Wy LED? LED tecnology offers unique benefits tat enable it to surpass alternative solutions in bot performance and functionality. Compact size design flexibility Long operating life Maintenance cost saving Hig efficiency Low wattage Low voltage Cold beam, no UV, instant ligt Hig optical performance, beam control Coice of colours Dimming

3 A Hig Ligt Output Ratio (LOR): 0.75 witout gobo accessory support (0.5 wit gobo accessory support) Patended optical system wit integrated beam adjustment from 10 to 24 A 2.4W LED PCB available in 5 colours (wite, red, blue, green and yellow) Vertical angle adjustment between - 40/+90 (tool supplied) 350 Rotation of te optical system (fixing tool supplied) LM6 aluminium body Two IP65 versions: one wit gear integrated in te base (Milo I) or remote gear version available (Milo R) Knock out for cable entry on side IP68 versions available for submersible applications (Milo S) Designer: Patrick Rimoux Simple to use patented beam adjustment, wic allows te beam to be altered after installation Due to te superior optical system, wic is similar to camera optics, additional accessories are not needed to provide your desired beam control. Adjustment is simple using an Allen key. LEDs combine reduced power consumption wit lower maintenance costs Full range includes underwater models (Milo S) and versions wit remote or integral gear (Milo R and I) Milo S provides IP68 protection offering an inexpensive alternative to fibre optics. Due to te LED ligt source no maintenance is required Unique gobo support accessory available for outdoor image projection (see page 5) Gobo support accessory as a fully weaterproofed IP65 compact body All models ave a contact temperature of 45 C Durable aluminium construction offering longer luminaire life and UV resistance Lamps 2.4 W LED (Pre-fixed PCB wit 1 LED) Available in wite (5500K), red, blue, green and yellow. Materials/Finis Body/Frame: injected aluminium textured grey powder coated finis (close to RAL 9007) Oter RAL colours available to order. Lenses: polycarbonate Endcaps: stainless steel Gasket: silicone Installation/Mounting Base secured wit two M6 (Milo I) or tree M4 (Milo R and S) x 25mm screws. Installation aided wit a fixing centre template to be found on installation instructions. Cable type required: HO7 RNF 2x1mm 2. Troug wiring possible and product is supplied wit two cable glands. Product supplied wit two Allen screws to fix te orientation of optics (not wit Milo S as position is fixed, Extensive beam is 24 and Intensive beam is 10 ). For Milo I te maximum number of products in a series is 35. For Milo R and S te maximum number of products in a series is 5 wen using te corresponding external gear, wit a maximum distance between products of 33m for Milo R and 100m for Milo S. Gobo Support (image projection) Insert gobo image (not supplied) in te gobo support, ten directly tread witout tool on to Milo R or I (not possible wit Milo S) Required dimensions for te gobo image: external diameter: 25.8mm image diameter: 20mm printed on glass, metal or plastic (see page 7). Standards Designed and manufactured to comply wit EN Class II Electrical (Milo I) Class III Electrical (Milo R and S) IK 09 impact resistance Ta-20/+40 C IP65 (Milo I and R) IP68 (Milo S, to 1m dept underwater) Specification To specify state: LED spotligt for 2.4 W LED s, wit gobo attacment, integral or remote gear and submersible versions available. As Torn Milo I/R/S/gobo

4 Applications Milo as been designed to produce stunning effects for applications were a traditional large projector is not practical Applications Milo is a single LED spotligt, wic can obtain dramatic ligting effects by adjusting te beam (extensive or intensive). Milo S, te IP68 version can be installed in any submersible application. All tese features make Milo suitable for use in sopping and business centres, otels, monuments and fountains. Colours Milo is available wit te following colour options: Wite (5500K) Red Blue Green Yellow Salies de Salat (31). P.DUMAS 4

5 Milo gobo support accessory can be combined wit Milo R and I to create an imaginative tool. By attacing Milo s gobo image projector te possibilities for creating effects are endless. Tis unique image projection accessory combined wit LED tecnology delivers a temperature so cool you can print your own gobo on any material (glass, metal, or even plastic) wit a ig quality printer. Te Milo gobo simply screws into place over your transparency ten te superb optical system projects onto your cosen surface, witout distortion. Projection of colour images, potograps, text or sapes formerly only possible using expensive gobo projectors are now possible. 5

6 Ordering Guide, Potometrics & Dimensions Milo R and S Milo I Milo gobo accessory support Ordering Guide Description Weigt (kg) SAP Code (1) 237 (2) (1) (2) Milo R - IP65/Beam adjustment/no gear MILO R 1X2.4W 1LED WHI/5500K MILO R 1X2.4W 1LED BLU MILO R 1X2.4W 1LED GRN MILO R 1X2.4W 1LED RED MILO R 1X2.4W 1LED YEL Milo S - IP68/Beam pre-fixed/no gear/submersible 147 (1) 139 (2) Milo R witout Gobo accessory support (1) (2) Milo R wit Gobo accessory support Intensive beam MILO S 1X2.4W 1LED WHI/5500K NW MILO S 1X2.4W 1LED BLU NW MILO S 1X2.4W 1LED GRN NW MILO S 1X2.4W 1LED RED NW MILO S 1X2.4W 1LED YEL NW Extensive beam MILO S 1X2.4W 1LED WHI/5500K WD MILO S 1X2.4W 1LED BLU WD MILO S 1X2.4W 1LED GRN WD MILO S 1X2.4W 1LED RED WD MILO S 1X2.4W 1LED YEL WD (1) 181 (2) Milo I witout Gobo accessory support (1) (2) Milo I wit Gobo accessory support Milo I - IP65/Beam adjustment/integrated gear MILO I 1X2.4W 230/240V 1LED WHI/5500K MILO I 1X2.4W 230/240V 1LED BLU MILO I 1X2.4W 230/240V 1LED GRN MILO I 1X2.4W 230/240V 1LED RED MILO I 1X2.4W 230/240V 1LED YEL (1) 237 (2) (1) 139 (2) Milo S witout Gobo accessory support Remote gear Milo R: 240(L) x 50(W) x 50(H) Remote gear Milo S: 230(L) x 105(W) x 79(H) (1) Intensive beam (2) Extensive beam Support for image projection (Milo I & R Only) MILO GOBO SUPPORT IP65 Gear for Milo R or Milo S MILO R GT 17W 0.7A-24V MILO S GT 25W 5A-24V WHI - wite, BLU - Blue, GRN - Green, RED - Red, YEL - Yellow 6

7 Milo witout gobo accessory support Milo wit gobo accessory support x x For image projection, you can install Milo (R or I) wit te gobo accessory support. Te gobo accessory support operates exactly like a camera zoom (focal 28 mm to 70mm). Tis accessory enables you to project any picture by a simple print or stencil of te required image on any material (glass, metal or even plastic) MILO Yellow - Intensive Beam MILO Yellow - Extensive Beam 11 6 Requirements for te gobo image: external diameter: 25.8mm and image diameter: 20mm Image size (diameter of te projected image) and focus (precision of te projected image) obtained by adjusting te beam using Milo s patented optical lens system MILO Wite - Intensive Beam x 5.0 2x x 9.9 MILO Wite - Extensive Beam x A 20mm 25.8mm A Different elements will ave an effect on te distance between te Milo gobo and te projected image, e.g. LED colour, type of image (cut-out sape/logo or picture) and ambient ligt. Minimum required distance between Milo wit gobo and te projection surface is 1 metre. A 20mm gobo image projected at a distance of 3m offers an image projection, wic is adjustable from 0.9m to 2.2m. To project a 2m image size, it is possible to install Milo from 2.8m to 6.7m in front of te projected surface MILO Red - Intensive Beam MILO Red - Extensive Beam 2x4.4 2x x 8.5 2x MILO Green - Intensive Beam MILO Green - Extensive Beam MILO Gobo Wite - focal 70mm MILO Gobo Wite - focal 41mm x x x Examples for Milo wite LED wit gobo. Intensity will vary wit oter LED colours MILO Blue - Intensive Beam MILO Blue - Extensive Beam MILO Gobo Wite - focal 28mm Te beam angle for Milo R and I is adjustable using te patented optical system. For Milo S please coose intensive or extensive fixed beam as sown above. 7

8 Ligting people and places Torn Ligting Limited UK Silver Screens, Elstree Way, Boreamwood, Hertfordsire, WD6 1FE UK Sales desk - Orders/Stock Enquiries Tel: Fax: Project Enquiries: Tel: Fax: Ireland 320 Harold s Cross Road, Dublin 6W Tel: (353) Fax: (353) enq.dublin@tornligt.com Outdoor Ligting Silver Screens, Elstree Way, Boreamwood, Hertfordsire, WD6 1FE Tel: Fax: enquiries.outdoor@tornligt.com Airfield Ligting Silver Screens, Elstree Way, Boreamwood, Hertfordsire, WD6 1FE Tel: Fax: airfield@tornligt.com Website: International Sales Silver Screens, Elstree Way, Boreamwood, Hertfordsire, WD6 1FE Tel: Fax: international.sales@tornligt.com Torn Ligting Ltd Dubai Al Soala Building, Office 301, Block E, PO Box 1200, Deira, Dubai, UAE Tel: (971) Fax: (971) tlluae@emirates.net.ae Torn Gulf LLC Al Soala Building, Office 301/2, Block E, PO Box 1200, Deira, Dubai, UAE Tel: (971) Fax: (971) torng@emirates.net.ae Oter Offices in: Australia, Austria, Cina, Czec Republic, Denmark, Estonia, France, Hong Kong, Italy, Latvia, Lituania, New Zealand, Norway, Poland, Russia, Singapore, Sweden and UAE Spare Parts Tel: Fax: spares@tornligt.com Tecnical Support Tel: Fax: tecnical@tornligt.com Brocureline Answering Service Brocures on specific products/ranges Tel: Fax: brocures@tornligt.com Torn Ligting is constantly developing and improving its products. All descriptions, illustrations, drawings and specifications in tis publication present only general particulars and sall not form part of any contract. Te rigt is reserved to cange specifications witout prior notification or public announcement. All goods supplied by te company are supplied subject to te company s General Conditions of Sale, a copy of wic is available on request. All measurements are in millimetres and weigts in kilograms unless oterwise stated. Publication No: 267 (UK) Publication Date: 05/06 Member of Te Ligting Industry Federation ISO 9001:2000 Reg: 2916/0 Manufacturing & Distribution