ISP-9652/9602 Quick Installation Guide Version 1.0

Transcription

1 Socket P Intel Core 2 Duo MB, GME965/GLE960 with 800/533MHz FSB, VGA, CF, 6 Intel GbE Lan with Dual group Lan-Bypass function, USB2.0, SATAII, RoHS ISP-9652/9602 Quick Installation Guide Version 1.0 Feb. 22, 2010 Package Contents ISP-9652/9602 package includes the following items 1 x ISP-9652/9602 Single Board Computer 3 x SATA cable 1 x Mini Jumper Pack 1 x Utility CD 1 x QIG(Quick Installation Guide) 2006 Copyright by IEI Technology corp. All rights reserved. 1

2 Specifications CPU : Socket P Intel Core 2 Duo Processor with 800MHz FSB Socket P Intel Celeron M Processor with 533MHz FSB System Chipset : Intel GME965 + ICH8M for ISP-9652 Intel GLE960 + ICH8M for ISP-9602 BIOS : AMI Flash BIOS FSB : 800 / 533MHz FSB for ISP MHz FSB for ISP-9602 System Memory : Two 240-pins 667/533MHz dual-channel DDR2 SDRAM DIMM Supported (max. 4GB) for ISP-9652 Two 240-pins 533MHz dual-channel DDR2 SDRAM DIMM Supported (max. 2GB) for ISP-9602 Ethernet : LAN1~LAN6: Six Intel 82574L PCIe GbE Controller(PCIe x1 Interface) 2 x LAN By-Pass Function Gruop(with Relay Control): By-Pass Group 1: LAN1/LAN2 By-Pass Group 2: LAN3/LAN4 I/O Interface : 2 x RS-232 (1 on rear side, 1 on board by pin-header) 10 x USB 2.0 (2 on rear side, 8 on board by pin-header) 3 x SATA II 1 x CF Type II Slot Display Interface : CRT/VGA integrated in Intel GME965/GLE960 (Intel GMA X3100) Expansions : 1 x PCI Slot 1 x PCIe x16 Signal to Golden finger (for ISP-9652 Only) Super I/O : ITE IT8718F 2

3 Embedded Controller: ITE IT8512E Watchdog Timer : Software Programmable support 1~255 sec. System reset by Super I/O : ITE IT8718F. Power Supply : ATX Power Supply Power Consumption : 5V@ 12.9 A, 12V@ 0.14A, 12V_Core@ 12.69A, 3.3V@ 0.47A (Intel Core 2 Duo T GHz with DDR2 800MHz 2GB DRAM x2) Operation Temperature : 0 C ~ 60 C (32 F ~ 140 F) Operation Humidity : 5% ~95% non-condensing Dimensions : 220mm x 244mm Weight : GW: 1000g / NW: 450 g Ordering Information ISP-9652-R10 : Socket P Intel Core 2 Duo MB, GME965 with 800MHz FSB, VGA, CF, 6 Intel GbE Lan with Dual group Lan-Bypass function, USB2.0, SATAII, RoHS ISP-9602-R10 : Socket P Intel Core 2 Duo MB, GLE960 with 533MHz FSB, VGA, CF, 6 Intel GbE Lan with Dual group Lan-Bypass function, USB2.0, SATAII, RoHS RS : RS-232 Cable with Bracket CB-USB14-RS: Quad Ports USB Cable with Bracket CB-USB02-RS: Dual Ports USB Cable with Bracket RS/ RS/ RS : SATA Power cable CF-479B-RS: CPU Cooler 3

4 Jumpers setting and Connectors LABEL J_CMOS1 USB_C01 USB23 USB45 USB67 USB68 COM1 COM2 VGA1 LAN1 LAN2 LAN3 LAN4 LAN5 LAN6 LAN_LED1 JSPI2 SATA1 SATA2 SATA3 CPU_FAN1 SYS_FAN1 F_PANEL1 CPU12V1 ATX1 CF1 PCI1 BAT1 DIMM1 DIMM2 FUNCTION Clear CMOS jumper External USB Connector Internal USB Connectors External Serial Port DB-9 Connector Internal Serial Port Connector On Board VGA DB-15 Connector LAN Connectors with Bypass Function LAN Connectors without Bypass Function External LAN LED connectors EC Function Setting connector Flash BIOS/EC FW SPI ROM connector Serial ATA Connectors CPU / System Fan Connectors PWR RST Buttons Indicators and Speaker +12V CPU Power Input Connector ATX Power Input Connector Compact Flash Slot PCI Slot Battery connector DDR2 DIMM Slots 4

5 J_CMOS1: Clear CMOS Jumper JP3 DESCRIPTION 1-2 (default) Normal Operation 2-3 Clear CMOS Setup JSPI2: Flash BIOS/EC FW SPI ROM Connector PIN NO. DESCRIPTION PIN NO. DESCRIPTION V 5 GND 2 CS0# 6 CLK 3 SO0 7 SI 4 N/C 8 N/C USB23,USB45,USB67,USB68: Internal USB Connectors PIN DESCRIPTION PIN DESCRIPTION 1 VCC(+5V) 2 GND 3 DATA- 4 DATA+ 5 DATA+ 6 DATA- 7 GND 8 VCC(+5V) COM2 : Internal Serial Port Connector (RS-232) PIN DESCRIPTION PIN DESCRIPTION 1 DCD# 6 DSR# 2 RXD 7 RTS# 3 TXD 8 CTS# 4 DTR# 9 VCC(+5V) 5 GND 10 NC 5

6 CPU12V1:+12V CPU Power Input Connector PIN NO. DESCRIPTION PIN NO. DESCRIPTION 1 GND 2 GND 3 +12V 4 +12V BAT1 : Battery Connector PIN DESCRIPTION 1 BAT+ (+3.3V) 2 BAT- (GND) CPU_FAN1,SYS_FAN1: FAN Connectors PIN DESCRIPTION 1 GND 2 +12V 3 Rotation Signal 4 Control F_PANEL1 : PWR RST Buttons Indicators and Speaker Power LED PWRBTN HDDLED PIN DESCRIPTION PIN DESCRIPTION 1 Power LED+ 2 Speaker+ 3 N/C 4 N/C 5 Power LED- 6 N/C 7 PWRBTN+ 8 Speaker- 9 PWRBTN- 10 N/C 11 HDLED+ 12 Reset+ 13 HDLED- 14 Reset - Speaker RESET 6

7 LAN_LED1: External LAN LED connectors PIN DESCRIPTION PIN DESCRIPTION 1 CN_L1_LINK_ACT# 14 CN_L1_LED 2 CN_L1_100# 15 CN_L1_1000# 3 CN_L2_LINK_ACT# 16 CN_L2_LED 4 CN_L2_100# 17 CN_L2_1000# 5 CN_L3_LINK_ACT# 18 CN_L3_LED 6 CN_L3_100# 19 CN_L3_1000# 7 CN_L4_LINK_ACT# 20 CN_L4_LED 8 CN_L4_100# 21 CN_L4_1000# 9 CN_L5_LINK_ACT# 22 CN_L5_LED 10 CN_L5_100# 23 CN_L5_1000# 11 CN_L6_LINK_ACT# 24 CN_L6_LED 12 CN_L6_100# 25 CN_L6_1000# 13 N/C 26 N/C : EC Function Setting Connector By-Pass Mode/Normal Mode Selection (1 2) By-Pass Mode Short(Hi) (Default) Normal Mode Open(Low) : EC Function Setting Connector SMBUS ID Selection (3 4) (5 6) (7 8) 0x60 Open(Low) Open(Low) Open(Low) 0x62 Open(Low) Open(Low) Short(Hi) 0x64 Open(Low) Short(Hi) Open(Low) 0x68 Short(Hi) Open(Low) Open(Low) 0x6A Short(Hi) Open(Low) Short(Hi) 0x6C Short(Hi) Short(Hi) Open(Low) 0x6E (Default) Short(Hi) Short(Hi) Short(Hi) System software can send command to Network Bypass MCU through SMBUS. This jumper selects SMBUS slave address for it. 7

8 : EC Function Setting Connector ACK Count (9 10) (11 12) (13 14) (15 16) 1 Second Open(Low) Open(Low) Open(Low) Open(Low) 2 Second Open(Low) Open(Low) Open(Low) Short(Hi) 3 Second Open(Low) Open(Low) Short(Hi) Open(Low) 4 Second Open(Low) Open(Low) Short(Hi) Short(Hi) 5 Second Open(Low) Short(Hi) Open(Low) Open(Low) 6 Second Open(Low) Short(Hi) Open(Low) Short(Hi) 16 Second (Default) Short(Hi) Short(Hi) Short(Hi) Short(Hi) This jumper sets counting-down interval for SMBUS monitoring. : EC Function Setting Connector HW MCU(EC) Enable/Disable (19 20) Enable Short(Hi) (Default) Disable Open(Low) 8

9 LAN Connectors & Bypass Function LAN Bypass Definition LAN Bypass feature removes a single point of failure so that essential business communication can continue while a network failure is diagnosed and resolved. In the event of a power, hardware or software failure, Hardware Bypass will automatically activate, allowing network traffic to continue. Traffic between the LAN and WAN is allowed without interruption. 9

10 10

11 Board Layout: Connector Locations 11