Zenostar Zr Translucent. light, medium, intense, sun and sun chroma. Patented CeramiC discs *
|
|
- Candace Waters
- 7 years ago
- Views:
Transcription
1 * ThE patent IS for discs with CONCENTRIC groove protected by Ep , U.S. 7, 604, 759 Zenostar Zr Translucent light, medium, intense, sun and sun chroma Patented CeramiC discs * ZENOTEC & ZENOSTAR CERAMICS 0483 Recommendations for use valid from June
2
3 Full contour Zenostar restorations with the Zenostar Art Module The Zenostar Zr Translucent light, medium, intense, sun and sun chroma work is given an individual nuance by staining with the Zenostar Stains. On the basis of only five initial shades, all 16 shades of the classic shade guide can be easily and quickly reproduced. 1. Milling and separating the restorations Zenostar restorations are made by milling the required work from pre-shaded Zenostar Zr Translucent blanks. The choice of blanks in the shades light, medium, intense, sun and sun chroma depends on the required tooth shade as shown in the shade guide (page 6). When the milling process is complete, the work must be separated from the blank at the pre-milled positions. 2. Grinding Gently grind the cervical and body areas with fine-grain emery paper. Suitable rotary burs can be used to characterize the occlusal surface. N.B. Avoid causing any fractures, cracks, edge chipping, sharp edges, indentations or undersized areas.
4 3. Sintering Sintering program for Zenotec Fire P1 / M2 Standard program 1450 C / 2 h Dwell min Dwell h Cooling Cooling Short sintering program for single copings in Fire P h Dwell min. Cooling approx. 1 h 30 min. Short sintering program for single copings in Fire M approx. 1 h 50 min. Dwell h Cooling min. Cooling h
5 Sintering programs for Zenotec Fire Cube Standard program 1450 C / 2 h approx. 1 h 30 min. Dwell min h Dwell h Cooling h Cooling h 15 min. Short sintering program for single copings in Fire Cube h Dwell min Cooling approx. 1 h 30 min. The sintering programs for Dekema furnaces can be found on the Dekema web site. N.B. Sinter programs apply to Zenotec Fire sintering furnaces Please observe the instructions for use issued with the material Sintering conditions apply to all types of dental restorations After changing programs and then sintering without a cover, we recommend inserting a dummy run without contents 4. Polishing Polish the restoration evenly with a bison bristle brush and Zenostar Polish diamond polishing paste. Here it is important to always polish the occlusal surface to a high shine; this helps to prevent abrasion to the opposing teeth.
6 Polierpaste 5. Individualization through staining and glazing The final shade nuance is achieved by staining with the stains from the Zenostar Art Module: Applying Zenostar Magic Glaze of Zenostar Magic Glaze Flu Apply the spray glaze thinly and evenly. To get the best results when applying the spray, hold the work in tweezers and rotate it quickly whilst spraying. Zenostar Magic Glaze and Zenostar Magic Glaze Flu do not retract from the edges and do not form beads on polished surfaces. This process is the ideal preparation for the subsequent application of the Zenostar Art Module stains. Glaze bake Carry out a glaze bake to fix the glaze. See the firing program on the next page. Tip Individual staining The glazed work is then individualized with the stains of the Zenostar Art Module. This is followed by a stain bake. See the firing program on the next page. Recommendations for obtaining the desired shade are given in the table below. With the Zenostar Magic Glaze Flu Spray you can put the perfect finishing touches to full contour restorations. The Flu Spray gives the restoration a fluorescence similar to that of natural dentition, perfectly rounding off the highly successful Zenostar concept. Creates natural fluorescence for full contour Zenostar restorations. Zenostar Magic Glaze Flu supports the fluorescent effect of the Zenostar stains, which are equally fluorescent. Zenostar crowns now feature a fluorescence which is comparable to that obtained by a ceramic build-up and to that of natural dentition. Zenostar Zr Translucent Zenostar Art Stain Zenostar Art Incisal Stain A-D Classical Professional A1 light A1/A2/A3 A2 light A1/A2/A3 A3 medium A1/A2/A3 A3,5 intense A3,5 A4 intense A4 B1 light B1/ B2 B2 light B1/ B2 B3 medium B3/ B4 B4 medium B3/ B4 C1 C2 light medium sun * / sun chroma * C1/C2/C3 C1/C2/C3 C3 medium C1/C2/C3 C4 intense C4 D2 medium D2/ D3 D3 medium D2/ D3 D4 medium D4 BL1 pure BL1/ BL2 BL2 pure BL1/ BL2 BL3 pure BL3/ BL4 BL4 light BL3/ BL4 Grey-Violet / Transpa-Blue The Zenostar Art Incisal Stains (Grey-Violet / Transpa-Blue) are used individually as required and depending on the tooth shade. * Warm reddish base shade
7 Standard firing program for Zenostar glaze and stain bake Pre-heat temp. Drying time [min] [ C / min] Firing temp. [min] Vacuum [%] Relief cooling [min] Glaze bake / /15 * Stain bake / /15 * 2 nd glaze bake (optional) / /15 * Important! Monolithic Zenostar single crowns should be fired with a heat rise of 45 C / min; monolithic Zenostar bridges should be fired with a heat rise of 15 C / min. * Very large items or items with a gingival mask should be allowed to cool for correspondingly longer time: at least 15 to 25 minutes. Tip To achieve an especially rich glaze and color depth with 3D effect, an additional glaze bake can be carried out at 930 C for 2 minutes. Important Do not remove work from the furnace whilst it is still hot (> 200 C) and under no circumstances place it on a cold surface. Crown and bridge frameworks made from Zenostar Zr Translucent light, medium, intense, sun and sun chroma For traditional veneering / layering of zirconia frameworks with Zenoflex dimension or Zirox veneering ceramic, we recommend using a liner in the corresponding shade or in the case of Zenoflex dimension, a liner or core stain. Sintering is carried out as for Zenostar work, i.e. the work can be made in the same sintering operation.
8 EXPECT THE DIFFERENCE! BY WIELAND. As a major supplier of dental system solutions, Wieland embodies both tradition and progress in matters of dental products and technology. Since our company was founded in 1871, we have stayed true to our corporate philosophy of combining tradition, innovation and quality with the best in customer care. Today, our core competencies and key strengths lie in the forward-looking integration of technologies and materials for dental prosthetics. This ensures that patients can trust in the quality of their restorations, and our partners in dental practices and laboratories can continue with confidence on the path to digitalisation and greater competitiveness. Wieland offers a wide range of products and services from CAD/CAM technologies and dental alloys to veneering ceramics and electroforming. Thanks to our worldwide presence and international network, Wieland is never far away, and your contact person can always be located via the Internet. Wieland Dental +Technik GmbH & Co. KG Schwenninger Straße 13, Pforzheim, Germany Fon / , Fax / e.02.06/12
all ceramic all options
all ceramic all options FULL CONTOUR CO ZIRCONIA Guidelines for dental technicians 5884 Zenostar Guideline Brochure V3.indd 1 7/19/13 9:56 AM Zenostar Full Contour Zirconia Restorations Your best option
More informationTHE ZENOSTAR CONCEPT. Guidelines for dental technicians / clinicians. www.zenostar.de VOLLANATOMIE FULL CONTOUR
THE ZENOSTAR CONCEPT Guidelines for dental technicians / clinicians VOLLANATOMIE FULL CONTOUR www.zenostar.de VOLLANATOMIE FULL CONTOUR Zenostar dental restorations from Wieland Dental The clear monolithic
More informationDIRECT MARCH 2011. IDS 2011 Innovative solutions, latest trends and attractive business models Page 4. ZENOTEC mini A compact unit you ll just love
DIRECT 01 MARCH 2011 IDS 2011 Innovative solutions, latest trends and attractive business models Page 4 ZENOTEC mini A compact unit you ll just love Page 7 Product highlights A wealth of new highlights
More informationIPS e.max CAD C16. Larger Size Block Low translucency Shades: A1, A2, A3, A3.5, B1, B2, C1, C2, D2, BL2 Indicated for single unit restorations
IPS e.max CAD C16 IPS e.max CAD C16 Larger Size Block Low translucency Shades: A1, A2, A3, A3.5, B1, B2, C1, C2, D2, BL2 Indicated for single unit restorations Full and partial coverage single units Large
More informationpriti crown Your patients deserve you
priti crown Your patients deserve you 3 and you deserve the priti crown So close to nature priti crown is a high-tech solution for making perfect crown and bridge restorations using state-of-the-art CAD/CAM
More informationPRESS. Pressable Ceramic System. Perfect shades first time every time. Instruction Manual. Products for better dentistry
Pressable Ceramic System PRESS Perfect shades first time every time Instruction Manual Products for better dentistry Pressable Ceramic Pressable Ceramic System PRESS Perfect shades first time every time
More informationHow to Achieve Shade Harmony With Different Restorations
Procera Alumina vs. Feldspathic Porcelain How to Achieve Shade Harmony With Different Restorations Luke S. Kahng, CDT Key Words: Stump shade, Feldspathic Porcelain, Zirconia, Alumina, LSK Treatment Plan
More informationIPS. Special Edition. Press-on-Metal Ceramic. Harald Gritsch Max Wörishofer Christoph Zobler
InLine PoM Press-on-Metal Ceramic IPS Special Edition Harald Gritsch Max Wörishofer Christoph Zobler Press-on technique on metal frameworks Combining the widely known casting technique and press technique
More informationIPS Empress CAD for CAD/CAM technology Information for Dentists. Confidence. Reliability. Esthetics. Empress CAD. The world s leading all-ceramic
CAD for CAD/CAM technology Information for Dentists Confidence Reliability Esthetics The world s leading all-ceramic A time-tested system with new possibilities More versatility with revolutionized the
More informationSTEP-BY-STEP INSTRUCTIONS ON THE PROSTHETIC PROCEDURES. Straumann Anatomic IPS e.max Abutment
STEP-BY-STEP INSTRUCTIONS ON THE PROSTHETIC PROCEDURES Straumann Anatomic IPS e.max Abutment The ITI (International Team for Implantology) is academic partner of Institut Straumann in the areas of research
More informationDental Intelligence. dd TECHNIQUE. The Material. First Experiences with the One Body System IQ from GC
First Experiences with the One Body System IQ from GC Dental Intelligence An article by Michael Brüsch, MDT, Düsseldorf, Germany High quality is not enough anymore; price is ruling the market. Such circumstances
More informationAmerican Academy of Cosmetic Dentistry. Laboratory Technician Clinical Case Type II. One or Two Indirect Restorations
American Academy of Cosmetic Dentistry Laboratory Technician Clinical Case Type II One or Two Indirect Restorations AACD Member ID # 00000 EXAMPLE REPORT Treatment List #8, #9 All Ceramic Crowns Restorative
More informationWAX-UP AND CERAMIC EXTENSIVE COURSE Dr. Dario Adolfi Dr. Ivan Ronald Huanca
WAX-UP AND CERAMIC EXTENSIVE COURSE Dr. Dario Adolfi Dr. Ivan Ronald Huanca Duration: 6 meses STEP 1: WAX-UP OF FOUR UPPER POSTERIOR TEETH with Dr. Ivan Ronald Huanca The objective of this course s step
More informationall digital all options The right milling option High precision and productivity
all digital all options The innovative FULL CONTOUR milling system ZIRCONIA The right milling option High precision and productivity Customized digital solutions for every laboratory Preparation Scanners
More informationUniversal Crown and Bridge Preparation
Universal Crown and Bridge Preparation The All-Ceramic Crown Preparation Technique for Predictable Success According to Dr. Ronald E. Goldstein Expect the Best. Buy Direct. The Universal * Crown and Bridge
More informationBiodenta CAD/CAM Case Report - Urs Brodbeck, DMD, Zurich, Switzerland. Monolithic Zirconia 12unit full-arch reconstruction
Biodenta CAD/CAM Case Report - Urs Brodbeck, DMD, Zurich, Switzerland Monolithic Zirconia 12unit full-arch reconstruction Clinician: Urs Brodbeck, DMD, Zurich / Switzerland Technicians: ARTECO Zurich,
More informationporcelain fused to metal crown
Lectur.5 Dr.Adel F.Ibraheem porcelain fused to metal crown the most widely used fixed restoration,it is full metal crown having facial surface (or all surfaces) covered by ceramic material. It consist
More informationZirconium Abutments for Improved Esthetics in Anterior Restorations
Zirconium Abutments for Improved Esthetics in Anterior Restorations by Luke S., C.D.T. Mr. is the founder and owner of Capital Dental Technology Laboratory, Inc., in Naperville, Illinois. The laboratory
More informationIt s the Fuel For Your Success
It s the Fuel For Your Success Engineered For Success Today s patients demand aesthetic restorative outcomes that match or enhances their natural dentition. While this has traditionally been accomplished
More informationZIRCONIA INFORMATION FOR DENTISTS. FAQ S from the dental practice ENGLISH
ZIRCONIA INFORMATION FOR DENTISTS FAQ S from the dental practice ENGLISH Zr Facts and Answers 2 Facts and Answers What is Zirconia? Zirconium (ZrSiO ) belongs to the mineral group of silicates and 4 was
More informationMrazek Consulting Services William R. Mrazek B.S., CDT
Mrazek Consulting Services William R. Mrazek B.S., CDT Thank your for your interest in Mrazek Consulting Services. As a dental technician and laboratory owner for over 30 years, I understand the technical
More informationPrecise. Powerful. Pure.
DATRON D1pure 2 Precise. Powerful. Pure. 3 DATRON Worldwide references p. 32 DATRON DentalCAM p.20 Scanners p.28 CAD p.28 4 Dental materials and Dental milling tools p. 24 DATRON D1 pure p. 7 We Understand
More informationRestoration of a screw retained single tooth restoration in the upper jaw with Thommen Titanium base abutment.
Restoration of a screw retained single tooth restoration in the upper jaw with Thommen Titanium base abutment. Dr. med. dent. David McFadden, Dallas County, USA Initial situation (single X-ray) Tooth 16
More informationCAD/CAM. Solutions flexible, economical, future-proof
CAD/CAM Solutions flexible, economical, future-proof What would you like to use CAD/CAM solutions for today and tomorrow? Custom abutments Crown and bridge restorations Segments within prosthetics in the
More informationTroubleshooting. Crown and Bridge Technique
Troubleshooting Crown and Bridge Technique Dear Customer, Thank you for selecting Dentaurum products for crown and bridge dental prostheses. You decided to purchase high quality products that are precisely
More informationATLANTIS abutments as individual as your patients
ATLANTIS abutments as individual as your patients ATLANTIS the freedom of unlimited possibilities Discover why ATLANTIS CAD/CAM abutments are the natural choice for patientspecific, cement-retained implant
More informationFull Denture System. Full denture prosthetics for dental technicians customised, precise, aesthetic
EN Full Denture System Full denture prosthetics for dental technicians customised, precise, aesthetic Customised and according to dental technology logic. PRECISE CONVENTIONAL IMPRESSION TAKING AUTOMATIC
More informationYour stepping stones to success.
CAD/CAM SYSTEMS INSTRUMENTS HYGIENE SYSTEMS TREATMENT CENTERS IMAGING SYSTEMS THE inlab SYSTEM AND ITS COMPONENT PARTS Your stepping stones to success. T h e D e n t a l C o m p a n y inlab YOUR FUTURE-ORIENTED
More informationOctober 29, 2015. Dear Ms. Hartnett:
DEPARTMENT OF HEALTH & HUMAN SERVICES Public Health Service Food and Drug Administration 10903 New Hampshire Avenue Document Control Center WO66-G609 Silver Spring, MD 20993-0002 October 29, 2015 Ivoclar
More informationFull Crown Module: Learner Level 1
Full Crown Module Restoration / Tooth # Full Gold Crown (FGC) / 30 Extensions: Porcelain Fused to Metal (PFM) / 12 All Ceramic / 8 Learner Level 1 Mastery of Tooth Preparation Estimated Set Up Time: 30
More informationStructur. Structur 2 SC / Structur Premium EXCELLENT TEMPORARIES WITH STRUCTUR
Structur Structur 2 SC / Structur Premium EXCELLENT TEMPORARIES WITH STRUCTUR Simple to use Reliable products are required to provide your patients with prosthetic treatments, especially with regard to
More informationAt the AACD s scientific sessions in Atlanta and New Orleans, Zenith Dental
Fac i a l Ch a n g e s Th r o u g h De n ta l Te m p o r i z at i o n by Elliot Mechanic, DDS Montreal, QC Canada info@drmechanic.com At the AACD s scientific sessions in Atlanta and New Orleans, Zenith
More informationBASE PREP & WAXING GUIDE FOR ALPINE, FREERIDE AND SNOWBOARD
BASE PREP & WAXING GUIDE FOR ALPINE, FREERIDE AND SNOWBOARD Alpine ski and snowboard preparation Three important areas when prepping edges PERFORMANCE USER LEVEL This is the level for alpine skiers and
More informationClass I and II Indirect Tooth-Colored Restorations
Class I and II Indirect Tooth-Colored Restorations Most indirect restorations are made on a replica of the prepared tooth in a dental laboratory by a trained technician. Tooth-colored indirect systems
More informationCOATED CARBIDE. TiN. Al 2 O 3
COATED CARBIDE GENERAL INFORMATION CVD = Chemical Vapour Deposition coated grades GC2015, GC2025, GC2135, GC235, GC3005, GC3015, GC3020, GC3025, GC3115, GC4015, GC4025, GC4035, S05F, and CD1810. PVD =
More informationJacket crown. Advantage : Crown and Bridge
Crown and Bridge Lecture 1 Dr.Nibras AL-Kuraine Jacket crown It is a type of crown that is formed by a tooth colored material. It is mainly used as a single unit in the anterior quadrant of the mouth.
More informationCEREC inlab the multifunctional CAD/CAM system for modern dental restorations.
CEREC inlab the multifunctional CAD/CAM system for modern dental restorations. CEREC inlab technology CEREC inlab progress coupled with experience: Sirona s leading-edge CAD/CAM system. Sirona: a leading
More informationTaking a Custom Shade, Step by Step: A Technician s Viewpoint
Members Pearls Taking a Custom Shade, Step by Step: A Technician s Viewpoint Ka h n g by Luke S. Khang, C.D.T. Naperville, IL luke@lsk121.com In t r o d u c t i o n Have you ever struggled with the selection
More informationThe course of time in dental morphology
The course of time in dental morphology Author_ Daniele Rondoni, Italy Figs. 1 3_Pressure die cast ceramic. The restoration must be perfectly integrated both morphologically and chromatically. The perfect
More informationINSPIRED BY NATURE: CHRISTIAN FERRARI FULL FUNCTIONAL AND ESTHETIC MINIMALINVASIV RESTORATION USING IPS E.MAX CERAMICS
DENTAVANTGART VOLUME IV ISSUE 03 AUTUMN 2014 INTERVIEW DR. VIOLETA BARTALIS ÉP. CLAUS & ZTM. JAN-HOLGER BELLMANN & DR. CARSTEN CLAUS DR. ATTILA BODROGI & CDT. SIMONE MAFFEI DR. CYRIL GAILLARD & CDT. JÉRÔME
More informationthe new dna of high strength glass ceramics
the new dna of high strength glass ceramics 1 the new dna of high strength glass ceramics Together with the Fraunhofer Institute and VITA, we have developed a new class of materials for high-strength glassceramics
More informationFABRICATING CUSTOM ABUTMENTS
FABRICATING CUSTOM ABUTMENTS LUC AND PATRICK RUTTEN How much should a Dental Technician know about the clinical aspects of implantology? The answer is clear: as much as possible. This is the distinction
More informationATLANTIS abutments design guide CAD/CAM patient-specific abutments
ATLANTIS abutments design guide CAD/CAM patient-specific abutments Contents Introduction 4 This manual helps you to explore all the benefits of ATLANTIS CAD/CAM patient-specific abutments. It gives you
More informationCHAPTER 10 RESTS AND PREPARATIONS. 4. Serve as a reference point for evaluating the fit of the framework to the teeth.
CHAPTER 10 RESTS AND DEFINITIONS A REST is any rigid part of an RPD framework which contacts a properly prepared surface of a tooth. A REST PREPARATION or REST SEAT is any portion of a tooth or restoration
More information402 South Rd, Moorabbin, VICTORIA, 3189 Phone: (03) 9555 7441 E mail: info@brightstardental.com.au ABN: 92 124 730 874
Brig ht St ar Dent al Cent re Dent al Corporat ion Pt y L t d 402 South Rd, Moorabbin, VICTORIA, 3189 Phone: (03) 9555 7441 E mail: info@brightstardental.com.au ABN: 92 124 730 874 Cosmetic Den tistry
More informationRestoring Central Incisors
Restoring Central Incisors The Synergy and Pathway to Predictable Esthetics Ana L. Villagrana Serena Kurt, DDS Key Words: incisal length, lithium disilicate, reverse smile, indirect restorations, communication,
More informationwww.startskiwax.com Waxing guide for recreational and fitness skiers
www.startskiwax.com Waxing guide for recreational and fitness skiers Easy choice. Start Easy waxes New Start Easy waxes are easy to handle and safe to use. The Easy line consists of liquid Easy kick and
More informationAesthetics meets CAD/CAM in the dental surgery
62 EDI New state-of-the-art options for implant-supported restorations Aesthetics meets CAD/CAM in the dental surgery Dr Mathias Siegmund, M.Sc., Regensburg, Germany Thanks to the new Sub-Tec CAD/CAM TiBase
More informationCOURSES. International Center for Dental Education Ivoclar Vivadent Vienna Austria GET INSPIRED ENGLISH D CAM
COURSES 2016 International Center for Dental Education Ivoclar Vivadent Vienna Austria GET INSPIRED ENGLISH CA D CAM 3 TRAINER and CAD/CAM-SPECIALISTS Vjekoslav Budimir Helmut Berger Dr. Florin Cofar 3
More informationIntroduction to Charting. Tooth Surfaces: M = mesial D = distal O = Occlusal B = buccal F = facial I = incisal L = lingual
Tooth Surfaces: M = mesial D = distal O = Occlusal B = buccal F = facial I = incisal L = lingual When combining tooth surfaces, as in defining cavity preparations or restorations, there are some spelling
More informationDESS. Screws. Tijuana Ventas: (664) 685 6294/95 hirambogarin@dabocorp.com. For all major implant systems!! www.dabocorp.com
Screws Screws for definitive use. Made from medical grade 5 ELI Titanium Integrity and soundness guaranteed by stress tests of up to 150% of their nominal torques. Their designs ensure a perfect fit with
More informationRegular C/X Prosthetics. Prosthetics
Regular C/X Prosthetics /X C/ Prosthetics ANKYLOS C/X Prosthetics For more than 20 years, the ANKYLOS system developed by Prof. Dr. G.-H. Nentwig and Dr. Dipl.-Ing. Walter Moser with its TissueCare Connection
More informationRestorative Guidelines
Restorative Guidelines Contents Restorative Guidelines 4.1 Neoss Implant System 4.2 4.2 Esthetiline Solution 4.3 4.3 Provisional Abutments 4.8 4.4 Impression Techniques Implant Level 4.12 4.5 NeoLink
More informationTHE VOICE OF TECHNO-CLINICAL DENTISTRY
May 2009 Vol. 3, No. 2 THE VOICE OF TECHNO-CLINICAL DENTISTRY The Enhanced Restoration of Removables Jim Collis, CDT Patients with existing full or partial dentures often report that they would like to
More informationSeeing CAD/CAM in a new light.
CAD/ CAM SYSTEMS INSTRUMENTS HYGIENE SYSTEMS TREATMENT CENTERS IMAGING SYSTEMS CEREC NEW PRODUCTS 2009 Seeing CAD/CAM in a new light. T h e D e n t a l C o m p a n y Precision and simplicity redefined.
More informationAnother Implant Option for Missing Teeth with Challenging Symmetry Patrick Gannon, DDS and Luke Kahng, CDT
Another Implant Option for Missing Teeth with Challenging Symmetry Patrick Gannon, DDS and Luke Kahng, CDT Introduction A 58 year old male had been missing teeth #7=12 for approximately 28 years. During
More informationBuild-up System. Color-Chart
Firing Schedule for VINTAGE Build-up System Porcelain System Opal Incisal Body Preheating ( C) Drying (min) Vacuum Incr. tem- Vacuum Final perature final tem- tem( C/min) perature perature Holding time
More informationSTEP BY STEP INSTRUCTIONS ON TEMPORARY ABUTMENTS. Straumann Temporary Abutments, VITA CAD-Temp
STEP BY STEP INSTRUCTIONS ON TEMPORARY ABUTMENTS Straumann Temporary Abutments, VITA CAD-Temp The ITI (International Team for Implantology) is academic partner of Institut Straumann AG in the areas of
More informationImplants in your Laboratory: Abutment Design
1/2 point CDT documented scientific credit. See Page 41. Implants in your Laboratory: Abutment Design By Leon Hermanides, CDT A patient s anatomical limitations have the greatest predictive value for successful
More informationSAME DAY VS. TRADITIONAL CROWNS. Which is the better choice? PRESENTED BY
SAME DAY VS. TRADITIONAL CROWNS Which is the better choice? PRESENTED BY What is a dental crown & why do I need one? A dental crown is a hard, protective covering for a tooth. It improves or restore the
More informationTechnically Beautiful TM
TM Technically Beautiful TM Radiance Plus is the clearest ceramic twin bracket available, delivering exceptional results with features other cosmetic brackets just can t match. This latest generation of
More informationRenaissance of One-Piece Implants
2 EDI Minimally invasive and patient-friendly treatment concepts using one-piece implants Renaissance of One-Piece Implants Hannes Thurm-Meyer, dentist, Bremen, Germany, Thomas Horn, master dental technician,
More informationGuidance for implant removal. Straumann Dental Implant System
Guidance for implant removal Straumann Dental Implant System The ITI (International Team for Implantology) is academic partner of Institut Straumann AG in the areas of research and education. ContentS
More informationTechnical Information DF30
Technical Information DF30 Performance Pigments and Colors Lead Free Onglaze Colours for Porcelain, Bone China, Vitreous China, Earthenware, and Enamel In this leaflet, Ferro presents SAMBA100, the next
More informationBrisa UV Gel Enhancements Sculpted on a Tip
Step-by-Step Guide Brisa UV Gel Enhancements Sculpted on a Tip 90 MIN A service designed for problem nails with no natural nail extension edge, requiring length and re-design. STEP 1: P.R.E.P. f. Apply
More informationDentist and Lab Communication: Key to better Restorations.
Dentist and Lab Communication: Key to better Restorations. 1 Dr. Ajit S. Jankar, 2 Dr. yogesh J.Kale Abstract: Dental professionals must consider the health of surrounding soft tissues, reproduce the size,
More informationAUSTENITIC STAINLESS DAMASCENE STEEL
AUSTENITIC STAINLESS DAMASCENE STEEL Damasteel s austenitic stainless Damascene Steel is a mix between types 304L and 316L stainless steels which are variations of the 18 percent chromium 8 percent nickel
More informationTips on Applying a Clear Finish
For More Helpful Information, Please Visit www.taylorcabinetdoor.com/instruct.shtml Tips on Applying a Clear Finish Weather & Workspace When starting the finish work the first rule is, do not apply the
More informationVITA YZ T / VITA YZ HT Working Instructions
VITA YZ T / VITA YZ HT Working Instructions VITA Farbkommunikation VITA Farbkommunikation VITA shade determination VITA shade communication VITA shade reproduction VITA shade control Date of issue 08.15
More informationSaw Tooth Design and Tipping Materials
Saw Tooth Design and Tipping Materials Bruce Lehmann, P.Eng, Ph.D. Sr. Engineer, Thin Kerf Technologies Inc. British Columbia, Canada Introduction The purposes of a saw tooth are to: 1. Remove a chip from
More informationyour talent. our technology. the perfect fit.
your talent. our technology. the perfect fit. itero - exclusively distributed in Europe by The digital revolution Changing the Face of Dentistry Digital technology ensures a more accurate impression from
More informationTotally lightweight, totally flexible, totally titanium.
CAD/CAM SYSTEMS INSTRUMENTS HYGIENE SYSTEMS TREATMENT CENTERS IMAGING SYSTEMS CAD/CAM SYSTEMS INSTRUMENTS HYGIENE SYSTEMS TREATMENT CENTERS IMAGING SYSTEMS SIRONA UNIQUE WORLDWIDE SYSTEMS EXPERTISE IN
More informationStructur 3. Gloss without polishing. Structur 3. Composite material for the fabrication of
Composite material for the fabrication of temporary crowns and bridges Gloss without polishing 3 for temporary crowns and bridges with a sheen is a self-polymerising composite material for the fabrication
More informationNotes From Level IV Ski Preparation Course By Jake Weaver
Notes From Level IV Ski Preparation Course By Jake Weaver In November 2003, I took a NCCP course in order to learn more about ski preparation and waxing. The course was given by Alain Masson. Alain is
More informationA complete system geared to your success.
CAD/CAM SYSTEMS HANDPIECES HYGIENE SYSTEMS TREATMENT CENTRES IMAGING SYSTEMS CEREC AND inlab NEW PRODUCTS IN 2007 Dentistry at the turning point. CAD/CAM SYSTEMS INSTRUMENTS HYGIENE SYSTEMS TREATMENT CENTERS
More informationPress INSTRUCTIONS FOR USE
Press INSTRUCTIONS FOR USE TABLE OF CONTENTS 3 IPS e.max System all you need 4 IPS e.max Press Product Information Material Usage Composition Ingot concept Product overview and descriptions 16 IPS e.max
More informationState-of-the-art for your prostheses
WHERE CREATIVITY meets technology E CREATECH EXCELLENCE State-of-the-art technology for your prostheses 1 CREATECH EXCELLENCE What is createch Excellence? Createch Excellence is OUR RANGE OF SOLUTIONS
More informationPureForm Ceramic System. Emulating nature. The perfect disguise.
PureForm Ceramic System Emulating nature. The perfect disguise. The new shape of ceramics. The PureForm Ceramic System is offered in six configurations which are designed according to four basic tooth
More informationPreparing for success with digital impressions
Preparing for success with digital impressions Author_WilliamÊ Davidson,Ê DMD _During the last decade, dentistry has seen a dramatic shift from full-cast gold (FCG) and porcelainfused-to-metal (PFM) restorations
More informationAdvances in All Ceramic Restorations. Alaa AlQutub Umm AlQura University, Faculty of Dentistry
Advances in All Ceramic Restorations Alaa AlQutub Umm AlQura University, Faculty of Dentistry Types of materials used in esthetic zone I. Metal ceramic restoration: Metal ceramic alloy features : Produce
More informationTooth preparation J. C. Davenport, 1 R. M. Basker, 2 J. R. Heath, 3 J. P. Ralph, 4 P-O. Glantz, 5 and P. Hammond, 6
12 5 Tooth preparation J. C. Davenport, 1 R. M. Basker, 2 J. R. Heath, 3 J. P. Ralph, 4 P-O. Glantz, 5 and P. Hammond, 6 This final article in the series describes the modification of teeth to improve
More informationCAD INSTRUCTIONS FOR USE CHAIRSIDE
CAD INSTRUCTIONS FOR USE CHAIRSIDE TABLE OF CONTENTS 3 IPS e.max System all you need 4 IPS e.max CAD Product Information Material Usage Composition Block concept Product overview for CEREC Preparation
More informationCementation and Sterilization Guidelines for Labs and Dentists. Lava. Zirconia for Implant Abutments. Cementation and Sterilization.
Cementation and Sterilization Guidelines for Labs and Dentists Lava Zirconia for Implant Abutments Cementation and Sterilization Made Easy Zirconia for Implant Abutments Use your 3M ESPE Lava Scan ST Design
More informationComposite artistry- speedy mock up
Case Report: Composite artistry- speedy mock up Dr.Shikha Kanodia*, Dr.Manjit Kaur**, Dr.Girish J. Parmar*** * Asst. Professor, **Post Graduate Part 3, ***Head and Dean, Department of Conservative Dentistry
More informationAbutment Solutions For customized implant restorations fabricated with CEREC and inlab. Digital all around.
Abutment Solutions For customized implant restorations fabricated with CEREC and inlab Digital all around. The digital treatment workflow Digital impression taking Coordinated digital workflows in CAD/CAM
More informationDLT 123 CROWN AND BRIDGE
DLT 123 CROWN AND BRIDGE COURSE DESCRIPTION: Prerequisites: DLT 111 and DLT 114 Corequisites: None This course introduces techniques for fabricating cast gold restorations. Topics include infection control,
More informationA beautiful smile. Perfectly matched.
A beautiful smile. Perfectly matched. ClearVu Cosmetic Braces perfectly matched to your smile ClearVu Cosmetic Braces are the ultimate combination of beauty and performance. There s no better choice for
More informationAdvanced technology for your perfect smile!
Advanced technology for your perfect smile! Solutions for your highest expectations Welcome to the future of dental technology! Content The Company 03 Scanner 04 CAD 05 CAM 06 Support and training 07 340i
More informationDespite spending many thousands of pounds on a beautiful new conservatory, it is a sad fact that many suffer from intolerable heat and glare problems
Despite spending many thousands of pounds on a beautiful new conservatory, it is a sad fact that many suffer from intolerable heat and glare problems during the summer making them virtually unusable for
More informationAnterior crowns used in children
Anterior crowns used in children Objectives of this session Discuss strip crowns, temporary crown use and acrylic jacket crowns. Discuss the possible use of porcelain jacket crowns in paediatric dental
More informationAISI O1 Cold work tool steel
T OOL STEEL FACTS AISI O1 Cold work tool steel Great Tooling Starts Here! This information is based on our present state of knowledge and is intended to provide general notes on our products and their
More informationErich Lacher Präzisionsteile
Nexxus Industriewerbung 2893 12.13 Printed in Germany Erich Lacher Präzisionsteile GmbH & Co. KG Certified by Im Altgefäll 22 D 75181 Pforzheim Phone: +49 (0)7231/6097-0 Fax: +49 (0)7231/6097-60 E-Mail:
More informationBASIC INFORMATION ON THE STRAUMANN VARIOBASE ABUTMENT. Straumann Variobase Abutment
BASIC INFORMATION ON THE STRAUMANN VARIOBASE ABUTMENT Straumann Variobase Abutment 1 The ITI (International Team for Implantology) is academic partner of Institut Straumann AG in the areas of research
More informationAn Introductory Guide to AACD Accreditation
An Introductory Guide to AACD Accreditation AACD Accreditation Education, inspiration, motivation, and profitability AACD Accreditation: Education, inspiration, motivation, and profitability Accreditation
More informationAbutment fracture in a bridge supported by natural teeth and implants
Abutment fracture in a bridge supported by natural teeth and implants Authors_Dr Gregory-George Zafiropoulos, Dr Giorgio Deli & Dr Rainer Valentin, Germany/Italy _Introduction Implant treatment has evolved
More informationTHE CLASSIC COMPOSITE FOR EXQUISITE ESTHETICS
THE CLASSIC COMPOSITE FOR EXQUISITE ESTHETICS Versatile, Artistic, Lifelike EXQUISITE Esthetics With an array of dentin, enamel, and translucent shades, Vit-l-escence allows you to re-create the look of
More informationTaking care of your dental Implants ( By Dr. B. Pulec )
This article is written and presented by Dr. Boris Pulec MDS Dr. Pulec graduated from the University of Toronto and has been practicing privately for over 27 years. He has been a proponent of patient education
More informationLava. CNC 500 Milling Machine. Redefine. Productivity
Lava CNC 500 Milling Machine Redefine Productivity 2 3 4 1 5 6 1 2 3 3-axis speed and precision. 5-axis milling when you need it. A workpiece magazine that s not a lot of work. A worktool magazine with
More informationTaylor Dental Assisting School Course Description
Taylor Dental Assisting School Course Description Entry Level Dental Assisting The Entry Level Dental Assisting Course is divided into Twenty Six (26) modules of four hours each. Total time is One Hundred
More informationT1 LINE. Handpieces. T1 LINE supreme ergonomics in titanium.
T1 LINE Handpieces T1 LINE supreme ergonomics in titanium. > To be quite frank, flexibility is what I m aiming at in my dental practice. Now the choice is easy: the Sirona T1 LINE handpiece range.< Andrew
More information