8 Wide 1024x600 High Brightness High Definition Open Frame Display

Transcription

1 8 Wide 1024x600 High Brightness High Definition Open Frame Display User s Manual v1.0 XRS 8WHD

2 Table of Contents Display Features/Specifications 3 Optional Features 4 Controller Board Features 5 System Design 6 On-Screen Menu Features 7 Image Adjustment Menu 8 RGB Color Menu 10 Audio Menu 12 Image Position Settings 13 On-Screen Settings 15 Source Selection 19 2

3 Display Features Ultra-Slim Design Lightweight Aluminum Alloy Casing Detachable Brackets for Versatile Mounting Convenient Extended Cables with Connectors Easy Installation & Cable Replacement VGA Analog Input DVI Digital Input (Optional) HDMI Digital Input 1x RCA Composite (NTSC/PAL) Video Input 2x RCA Composite Audio Input 2x Speaker Level Outputs (for Internal Optional Speakers) Selectable Audio Input via On-Screen Menu (HDMI or External Audio Input) Auto Power-On (Display Powers-On When Detecting Video Signal) Display Specifications Display: 8 Full-color a-si TFT Display Type: TN Resolution (Native): 1024x600 Aspect Ratio: 16:9 Widescreen Display Colors: 16.7M Active Area: 192.8mm (H) x (V) Dot Pitch: mm (H) x (V) Surface Treatment: Hard Coating Weight: 188g (LCD Panel) Input Voltage: 12V DC Operating Temp: -20C to 70C Total Power: 3.44W Optical Specifications Brightness: 600 Nits Display Type: 800:1 Backlight Lifetime: 12,000 Hours (minimum) Viewing Angle: Right 80 deg Left 80 deg Up 80 deg Down 70 deg Response Time: Tr 4ms Tf 12ms Luminance Uniformity: 75% Color Gamut: % 3

4 Optional Features Optical Enhancement Optical Bonding of Touchscreen Superior Sunlight Readability Increased Contrast/Brightness Shock/Vibration/Impact Protection Prevents Moisture & Condensation Build-Up Available Touchscreens 5 Wire Resistive Single Touch 1.1mm Thickness Anti-Glare Finish 81% Light Transmission USB 1.1 and 2.0 FCC-B, CE MTBF 200,000 Hours Supported by Windows, Linux, Mac OS/X Projected Capacitive 16-Finger Multi-Touch 0.7mm Thickness Optional Decorative Cover Lens Detects Finger & Gloved Hand USB 2.0 or RS232 Serial 90% Light Transmission Operating Temp -20 to 85C Unaffected by EMI Interference Native Support in Windows 7, 8 & Mac OSX Linux & Android Supported Anti-Reflective Coating Improved Sunlight Readability Eliminates Reflections Down to <0.7% Light Transmission Rate of >94% Anti-Reflective & Anti-Glare Coating Improved Sunlight Readability Eliminates Reflections Down to <1.5% Diffuses Remaining Reflections w/6.5% Haze 4

5 Controller Board Features Inputs & Outputs VGA Input H: 31kHz-96kHz, V: 55kHz-76kHz Composite RCA Video Input NTSC/PAL HDMI Input Video 480i, 480p (60Hz) 576i, 576p (Hz) 720p (/60Hz) 1080i, 1080p (/60Hz) Audio 16Bit/24Bit Digital Stereo 44.1kHz 48kHz 96kHz 192kHz DVI Input (If available) H: 31kHz-96kHz, V: 55kHz-76kHz Internal Audio Amplifier Stereo 2x 3watt (3Ω Speaker) Menu Switchable Audio (HDMI or External Audio Input) Operation 6 OSD Languages English/French/Deutsch/Espanol/Korean/Italian Image Overscan (On/Off) 3 Color Status LED Green (Normal State) Amber (No Input Signal) Off (No Power) Operating Temperature -20C to 60C Supported Resolutions VGA (640x480) VGA (800x480) SVGA (800x600) WSVGA (1024x600) XGA (1024x768) Wide (1280x720) WXGA (1280x768) WXGA (1366x768) WXGA (1280x800) WXGA (1440x900) SXGA (1280x1024) HD+ (1600x900) WSXGA (1600x1024) UXGA (1600x1200) SXGA+ (1400x10) SXGA+ (1680x10 Full HD (1920x1080) WUXGA (1920x1200) 5

6 System Design LED POWER MENU UP LEFT RIGHT OSD Menu Board Interface LCD Panel LED Backlight Connector LCD Interface Cable J948 Backlight Connector Speaker Outputs 12V DC Power Stereo Audio Input Composite Video Input HDMI Digital Input VGA Analog Input

7 On-Screen (OSD) Menu System (A) Color Setting (B) Audio Setting (C) Image Setting (D) Menu Setting (A-1) Brightness (A-2) Contrast (A-3) Color Temp (A-4) Red (A-5) Green (B-1) Volume (B-2) Audio Input (C-1) Auto Adjust (C-2) OverScan (C-3) Color Menu (C-4) H position (C-5) V position (C-6) Clock (C-7) Phase (D-1) Language (D-2) OSD Timer (D-3) Transparency (D-4) Factory Reset (D-5) Version (A-6) Blue (C-8) DVI 1920X1200 (A-3B) Satutation (A-4B) Hue (A-5B) Sharpness (A-6B) Picture Mode (C-1B) OverScan (C-2B) Color Menu (C-3B) DVI 1920X1200 (E) Source Message (F) Source List Message (G) Volume Message (H) Ratio Message (I) Out Of Range Message (J) Auto Configration (K) Auto Color Message 7

8 Color Brightness Contrast Saturation Hue Sharpness Picture Mode User Selection OK Enter Menu YUV AV Color Menu : HDMI(DVI) Input AV1 input Menu : Menu Off : Move Icon OK : Go to adjust items 8

9 Color Picture Mode Dynamic Normal Mild User SRGB Selection Adjust Menu 5 Picture Modes For AV1 input HDMI(DVI) Input ( YUV menu) Menu : Menu Off : Move Item SEL,OK : select Item SRGB Adjust Menu (VCOM,ICM,DCC): (UP+LEFT) at SRGB Mode cf) 12 page 9

10 Color Brightness Contrast ColorTemp User Red Green Blue Selection OK Enter Menu RGB Color Menu : D-Sub RGB Input, HDMI(DVI) Input : RGB Menu Menu : Menu Off : Move Icon OK : Enter 10

11 Color Color Temp Cool Normal Warm SRGB User Selection Adjust Menu 5 Picture Modes For DSUB RGB input Menu : Menu Off : Move Item SEL,OK : select Item SRGB Adjust Menu (VCOM,ICM,DCC): (UP + LEFT) button at SRGB Mode cf) 12 page 11

12 AUDIO Volume Audio Input HDMI Audio Selection OK Enter Menu Audio Input : HDMI Audio and External Audio selection (HDMI Input ) Menu : Menu Off : Move Icon : Enter 12

13 IMAGE AUTO ADJUST H POSITION V POSITION CLOCK PHASE OverScan OFF Selection OK Enter Menu OverScan On/Of Adjustment menu for DSUB RGB input Menu : Menu Off : Move Icon : Enter 13

14 IMAGE OverScan Image DVI 1920x1200 OFF YUV Menu OFF Selection OK Enter Menu OverScan On/Of Image Menu : RGB Color menu /YUV Color Menu at HDMI(DVI) input signals Setup HDMI Port into DVI Port with only a 1920x1200 panel Menu : Menu Off : Move Icon : Enter 14

15 O S D Lanquage English OSD Timer Transparency 30 Reset Version FW Ver. 1.0 Selection OK Enter Menu English, Francais, Deutsch, Español Italian, Korean OSD Timer : 5 sec ~ 60 sec OSD Transparency Factory Reset Menu : Menu Off : Move Icon : Enter 15

16 O S D Reset Off On Selection Adjust Menu Factory Reset Menu : Menu Off : Move Icon SEL,OK : : Enter 16

17 SRGB Menu SRGB Menu for DCC and ICM VCOM : Default (139) DCC : Default (6) ICM Switch : Default ( On) Menu : Menu Off : Move : Adjust 17

18 ICM Menu Adjustment menu for ICM (Red, Green, Blue, Yellow, Cyan) Menu : Menu Return : Move Icon : Adjust 18

19 E DVI. HDMI 1920X1080 F Input Message Signal List Message * Some Input signals are not shown Message case : Power On start, Soft power On, Input change Input Signals : AV1, D-sub, DVI.HDMI SEL,OK : Menu Off Source AV1 D-SUB H HDMI.DVI Source Button (keypad) : UP KEY Menu : Menu Off : Move Select OK Enter : Enter 19

20 G LEFT KEY (Keyboard) Voulme Message Volume H IMAGE Ratio Message RATIO Menu : Menu return ARC Button or Right (Keyboard) 16 : 9 Normal 4 : 3 I Out of Range Message Dsub RGB Out of Range H : k H z V : H z 20

21 J Auto Configuration Message Auto Adjust of OSD menu on RGB signal Auto Adjust K Auto Color message Optimize RGB gain DOWN key ( Keyboard ) DOWN Button ( remote controller ) ( For Dsub RGB signal, Normal state ) Auto Color 21

22 Thank You for Using Revosys Interactive Display Solutions