TECGEN 5.5 OZ DRESS UNIFORM SHIRT FOR MEN

Transcription

1 TECGEN 5.5 OZ DRESS UNIFORM SHIRT FOR MEN Banded, top-stitched, button-down collar Pencil pocket Placket front ATPV = 8.0 cal/cm(2) Eight button closure COMFORT ENGINEERED FROM THE INSIDE OUT. Our lightweight, breathable, moisture wicking shirt is inherently flame resistant and is currently the lightest-weight woven FR shirt on the market that is dual-certified for NFPA HRC2 arc flash protection and NFPA flash fire resistance. This shirt will also help you meet new OSHA regulations. Available in Navy, Light Blue, Khaki, Orange, Royal Blue, and Grey

2 6 REASONS TO SPEC TECGEN COMFORT: Unlike ordinary FRC s, TECGEN garments don t require multiple washings to break in BREATHABLE: Managing the heat is easier when your workwear doesn t trap it in LIGHTWEIGHT: Our workwear is engineered to protect you without weighing you down INNOVATIVE: TECGEN fiber is an exclusive, patented material designed to meet or exceed the standards set for FR garments DURABLE: The FR capability of TECGEN workwear is built into the fiber itself. It will not wash out or wear away MOISTURE WICKING: Draws sweat away from the body to keep you cool TECHNICAL PRODUCT SPECS PERFORMANCE TECGEN SHIRT WEIGHT FABRIC ATPV Weave Min 8.0 cal/cm(2)* 2X1 Twill Tensile lbs (warp x weft) 100 x 70 Tear Strength Elemdorf - lbf ASTM D x 8 HTP (cal/cm^2) with spacer 12.8 without spacer 9.9 Char Length ASTM D <4" Flash Fire Exposure % body burn, (2 cal/cm(2)/sec 26% Dimensional Stability AATCC 135 <3% Thermal Shrinking Pass, <10% COMFORT Fabric Weight oz/sq yd 5.5 Grams/Meter 186 Moisture Wicking AATCC Wicking distance 2 min - 63 mm 10 min mm Breathability - Air Perm ASTM D 737 CFM/SQ ft (avg) 73 * Third-party testing conducted indicates that fabric meets the minimum requirements for HRC2. Results based on process averages. MEN S DRESS UNIFORM SHIRT MODEL NUMBER BUILD MATERIAL COLOR STYLE TAPE & EMBLEMS SHIRT SIZE oz Shirt material 12 Khaki 02 Dress work shirt T Tape and emblems 13 Small 21 Large LT S1 Orange color shirt fabric 13 Royal Blue CN Canadian style 14 Small L 22 XL 15 Grey 15 Small LT 23 XL L 16 Navy 16 Med 24 XL LT 19 Light Blue 17 Med L 25 2XL 20 Orange 18 Med LT 26 2XL L 19 Large Large L 42 7XL LT Call for personalized service. industrial.tecgen.com 2014 INVISTA. TECGEN is a trademark of INVISTA. TFR-CL R1

3 TECGEN 8 OZ WORK TROUSERS FOR MEN Dress style waistband Heavy duty zipper Reinforced stress points Two deep front pockets ATPV = 9.7 cal/cm(2) Two large rear pockets Flat front styling Available in Navy PATENTED TECGEN FIBER VISCO-ELASTIC CORE (Flexibility and Comfort) CARBON SHELL (Radiant Heat Protection) YOUR JOB IS HARD ENOUGH. WHY FIGHT YOUR FR? The TECGEN 8.0 oz Work Trouser is inherently flame resistant and offers over 50% more breathability compared to 88/12 cotton/nylon blended fabrics. This trouser is dual-certified for NFPA HRC2 arc flash protection and NFPA 2112 flash fire resistance.

4 6 REASONS TO SPEC TECGEN FR GARMENTS COMFORT: Unlike ordinary FRC s, TECGEN garments don t require multiple washings to break in BREATHABLE: Managing the heat is easier when your workwear doesn t trap it in LIGHTWEIGHT: Our workwear is engineered to protect you without weighing you down INNOVATIVE: TECGEN fiber is an exclusive, patented material designed to meet or exceed the standards set for FR garments DURABLE: The FR capability of TECGEN workwear is built into the fiber itself. It will not wash out or wear away MOISTURE WICKING: Draws sweat away from the body to help keep you cool TECHNICAL PRODUCT SPECS PERFORMANCE TECGEN PANT WEIGHT FABRIC (Industrial Pants) ATPV Min 9.7 cal/cm(2)* Weave 2X1 Twill Tensile lbs (warp x weft) 130 x 100 Tear Strength Elemdorf - lbf ASTM D x 8 HTP (cal/cm^2) with spacer 15.3 without spacer 11.6 Char Length ASTM D <4" Flash Fire Exposure % body burn, (2 cal/cm(2)/sec 15.3% Dimensional Stability AATCC 135 <3% Thermal Shrinking Pass, <10% COMFORT Fabric Weight oz/sq yd 8 Grams/Meter 271 Moisture Wicking AATCC Wicking distance 2 min - 56 mm 10 min mm Breathability - Air Perm ASTM D 737 CFM/SQ ft (avg) 37.4 * Third-party testing conducted indicates that fabric meets the minimum requirements for HRC2. Results based on process averages. MEN S PANT/JEAN MODEL NUMBER BUILD MATERIAL COLOR WAIST LENGTH oz Denim 16 Navy 28 Waist Size 28 Specify Length oz Pant weight 21 Denim 29 Waist Size 29 Specify Length 30 Waist Size 30 Specify Length 31 Waist Size 31 Specify Length 32 Waist Size 32 Specify Length 33 Waist Size 33 Specify Length 34 Waist Size 34 Specify Length 35 Waist Size 35 Specify Length Specify Length 50 Waist Size Call for personalized service. industrial.tecgen.com 2014 INVISTA. TECGEN is a trademark of INVISTA. TFR-CL R1

5 TECGEN 5 POCKET DENIM JEAN FOR MEN 4X Abrasion Resistance of comparable 100% cotton denim fabric.* (*Martindale testing based on oz denim fabric.) Pre-washed CORDURA Brand denim fabric Blend of 88% cotton and 12% INVISTA T-420 Nylon Exceptional abrasion resistance Metal tack button Reinforced stress points Heavy duty zipper ATPV = 21.7 cal/cm(2) ONLY QUITTIN TIME FEELS BETTER. The TECGEN 5 Pocket Denim Jean offers exceptional durability and comfort, and is the only flame-resistant denim jean to offer CORDURA Brand ruggedness. The authentic look and feel of traditional 100% cotton denim with built-in long-lasting durability.

6 4 REASONS TO SPEC TECGEN DENIM DUAL CERTIFIED: Meets both NFPA 2112 flash fire rating and 70E Category 2 Arc Rating DURABILITY: woven with CORDURA(R) Denim fabric for exceptional abrasion resistance and long lasting performance COMFORT: Pre-washed CORDURA Brand Denim Fabric provides comfort and durability QUALITY: The look of your favorite jeans built to handle the rigors of the job site TECHNICAL PRODUCT SPECS PERFORMANCE TECGEN JEAN ATPV 21.7 cal/cm(2)* Weave 3X1 Demin Tensile lbs (warp x weft) 248 x 138 Tear Strength Elemdorf - lbf ASTM D x 8 HTP (cal/cm^2) 21.7 Char Length ASTM D <4" Shrinkage AATCC <3%, pass Thermal Shrinking <10%, pass Fabric Weight oz/sq yd 14.8 * Third-party testing represents typical value. Results based on process averages. MEN S JEAN MODEL NUMBER BUILD MATERIAL COLOR WAIST LENGTH oz Denim 21 Demin 28 Waist Size 28 Specify Length 29 Waist Size 29 Specify Length 30 Waist Size 30 Specify Length 31 Waist Size 31 Specify Length 32 Waist Size 32 Specify Length 33 Waist Size 33 Specify Length 34 Waist Size 34 Specify Length 35 Waist Size 35 Specify Length Specify Length 50 Waist Size Call for personalized service. industrial.tecgen.com 2014 INVISTA. TECGEN is a trademark of INVISTA. TFR-CL R1

7 TECGEN 5.5 OZ DELUXE COVERALLS FOR MEN Two chest pockets with flaps Two-way zipper with snap closures on front and pockets Pass-through side pocket Elastic waistband ATPV = 8.0 cal/cm(2) Tool pocket YOUR FR WORKWEAR NEEDS TO BREATHE AS MUCH AS YOU DO. Our lightweight, breathable, moisture wicking coverall is inherently flame resistant and is currently the lightest-weight FR coverall on the market that is dual-certified for NFPA HRC2 arc flash protection and NFPA 2112 flash fire resistance. Available in Khaki, Navy, Orange, Royal Blue, and Grey

8 6 REASONS TO SPEC TECGEN COMFORT: Unlike ordinary FRC s, TECGEN garments don t require multiple washings to break in BREATHABLE: Managing the heat is easier when your workwear doesn t trap it in LIGHTWEIGHT: Our workwear is engineered to protect you without weighing you down INNOVATIVE: TECGEN fiber is an exclusive, patented material designed to meet or exceed the standards set for FR garments DURABLE: The FR capability of TECGEN workwear is built into the fiber itself. It will not wash out or wear away MOISTURE WICKING: Draws sweat away from the body to keep you cool TECHNICAL PRODUCT SPECS PERFORMANCE TECGEN COVERALL WEIGHT FABRIC ATPV Min 8.0 cal/cm(2)* Weave 2X1 Twill Tensile lbs (warp x weft) 100 x 70 Tear Strength Elemdorf - lbf ASTM D x 8 HTP (cal/cm^2) with spacer 12.8 without spacer 9.9 Char Length ASTM D <4" Flash Fire Exposure % body burn, (2 cal/cm(2)/sec 26% Dimensional Stability AATCC 135 <3% Thermal Shrinking Pass, <10% COMFORT Fabric Weight oz/sq yd 5.5 Grams/Meter 186 Moisture Wicking AATCC Wicking distance 2 min - 63 mm 10 min mm Breathability - Air Perm ASTM D 737 CFM/SQ ft (avg) 73 * Third-party testing conducted indicates that fabric meets the minimum requirements for HRC2. Results based on process averages. MEN S COVERALL MODEL NUMBER BUILD MATERIAL COLOR STYLE TAPE & EMBLEMS COVERALL SIZE oz Coverall material 12 Khaki 04 Contractor coverall T Tape and emblems 52 XS Short 60 Medium Short 13 Royal 08 Deluxe coverall CN Canadian style 53 XS Reg 61 Medium Reg 15 Grey 10 Top tier coverall 54 XS Long 62 Medium Long 16 Navy 55 XS X Long Orange 56 Small Short 93 7XL Reg 57 Small Reg 94 7XL Long 58 Small Long 95 7XL X Long 59 Small X Long 42 7XL LT Call for personalized service. industrial.tecgen.com 2014 INVISTA. TECGEN is a trademark of INVISTA. TFR-CL R1

9 TECGEN 5.5 OZ DRESS UNIFORM SHIRT FOR WOMEN Spread point collar with permanent collar stays Pen/pencil slot ATPV = 8.0 cal/cm(2) Seven button closure Adjustable button cuff WE D RATHER MEET YOUR STANDARDS THAN MINIMUM ONES. Features the same lightweight, breathable, moisture wicking TECGEN FR fabric, tailored for women. The result is currently the lightest weight woven women s shirt certified for 70E HRC2, and flash fire.* This shirt will also help you meet the new OSHA utility regulations. Available in Navy, Light Blue, Khaki, and Grey** * U.S. market study, August ** Non-standard colors and sizes are available contact your salesperson for details.

10 6 REASONS TO SPEC TECGEN COMFORT: Unlike ordinary FRC s, TECGEN garments don t require multiple washings to break in BREATHABLE: Managing the heat is easier when your workwear doesn t trap it in LIGHTWEIGHT: Our workwear is engineered to protect you without weighing you down INNOVATIVE: TECGEN fiber is an exclusive, patented material designed to meet or exceed the standards set for FR garments DURABLE: The FR capability of TECGEN workwear is built into the fiber itself. It will not wash out or wear away MOISTURE WICKING: Draws sweat away from the body to keep you cool TECHNICAL PRODUCT SPECS PERFORMANCE TECGEN SHIRT WEIGHT FABRIC ATPV Weave Min 8.0 cal/cm(2)* 2X1 Twill Tensile lbs (warp x weft) 100 x 70 Tear Strength Elemdorf - lbf ASTM D x 8 HTP (cal/cm^2) with spacer 12.8 without spacer 9.9 Char Length ASTM D <4" Flash Fire Exposure % body burn, (2 cal/cm(2)/sec 26% Dimensional Stability AATCC 135 <3% Thermal Shrinking Pass, <10% COMFORT Fabric Weight oz/sq yd 5.5 Grams/Meter 186 Moisture Wicking AATCC Wicking distance 2 min - 63 mm 10 min mm Breathability - Air Perm ASTM D 737 CFM/SQ ft (avg) 73 * Third-party testing conducted indicates that fabric meets the minimum requirements for HRC2. Results based on process averages. WOMEN S UNIFORM DRESS SHIRT MODEL NUMBER BUILD PRODUCT GARMENT DESIGN LEVEL / VERSION COLOR SIZE/WAIST BODY/INSEAM S Industrial S Shirt WN Women s Khaki 3S XXX - Small 2X 2XL 3S XXX - Short C Coverall Royal Blue 2S XX - Small 3X 3XL 2S XX - Short Grey 1S X - Small 4X 4XL 1S X - Short 16 Navy SM Small 5X 5XL SH Short 19 Light Blue MD Medium 6X 6XL RG Regular 20 Orange LG Large 7X 7XL TL Tall XL X Large 8X 8XL XT X - Tall Tape and emblem options available on request. Call for personalized service. industrial.tecgen.com 2014 INVISTA. TECGEN is a trademark of INVISTA. TFR-CL R1

11 TECGEN 5.5 OZ DELUXE COVERALLS FOR WOMEN Hidden snap closures on front pockets Two-way zipper Pass-through side pockets with snaps Contoured silhouette with elastic waistband ATPV = 8.0 cal/cal/cm(2) Side tool pocket FR WORKWEAR TAILORED FOR A MORE PRODUCTIVE WORKFORCE. Features the same lightweight, breathable, moisture wicking TECGEN FR fabric, incorporated into a coverall designed from the ground up for women. The result is currently the lightest woven women s coverall certified for 70E HRC2, and flash fire.* This coverall will also help you meet the new OSHA Utility regulations. Available in Khaki, Royal Blue, and Navy** * U.S. market study, August ** Non-standard colors and sizes are available - contact your salesperson for details.

12 6 REASONS TO SPEC TECGEN COMFORT: Unlike ordinary FRC s, TECGEN garments don t require multiple washings to break in BREATHABLE: Managing the heat is easier when your workwear doesn t trap it in LIGHTWEIGHT: Our workwear is engineered to protect you without weighing you down INNOVATIVE: TECGEN fiber is an exclusive, patented material designed to meet or exceed the standards set for FR garments DURABLE: The FR capability of TECGEN workwear is built into the fiber itself. It will not wash out or wear away MOISTURE WICKING: Draws sweat away from the body to help keep you cool TECHNICAL PRODUCT SPECS PERFORMANCE TECGEN COVERALL WEIGHT FABRIC ATPV Weave Min 8.0 cal/cm(2)* 2X1 Twill Tensile lbs (warp x weft) 100 x 70 Tear Strength Elemdorf - lbf ASTM D x 8 HTP (cal/cm^2) with spacer 12.8 without spacer 9.9 Char Length ASTM D <4" Flash Fire Exposure % body burn, (2 cal/cm(2)/sec 26% Dimensional Stability AATCC 135 <3% Thermal Shrinking Pass, <10% COMFORT Fabric Weight oz/sq yd 5.5 Grams/Meter 186 Moisture Wicking AATCC Wicking distance 2 min - 63 mm 10 min mm Breathability - Air Perm ASTM D 737 CFM/SQ ft (avg) 73 * Third-party testing conducted indicates that fabric meets the minimum requirements for HRC2. Results based on process averages. WOMEN S COVERALL MODEL NUMBER BUILD PRODUCT GARMENT DESIGN LEVEL / VERSION COLOR SIZE/WAIST BODY/INSEAM S Industrial C Coverall WN Women s Khaki 3S XXX - Small 2X 2XL 3S XXX - Short Royal Blue 2S XX - Small 3X 3XL 2S XX - Short Grey 1S X - Small 4X 4XL 1S X - Short 16 Navy SM Small 5X 5XL SH Short 20 Orange MD Medium 6X 6XL RG Regular LG Large 7X 7XL TL Tall XL X Large 8X 8XL XT X - Tall Tape and emblem options available on request. Call for personalized service. industrial.tecgen.com 2014 INVISTA. TECGEN is a trademark of INVISTA. TFR-CL R1