User's manual Studio 22 Pro USB

Transcription

1 User's manual Studio 22 Pro USB

2 Precaution Thank you for purchasing this digital appliance. To ensure perfect operation and security, please read the manual carefully and retain it for future reference. Safety Precautions The lightning flash with the arrowhead symbol in an equilateral triangle is intended to alert the user to the presence of non-insulated dangerous voltage inside the appliance that may be of sufficient magnitude to constitute a risk of electric shock. The exclamation point within an equilateral triangle is intended to alert the user to the presence of important operating and maintenance (servicing) instructions in the literature accompanying the product. Important Safety Instructions 1) Read these instructions. 2) Retain these instructions. 3) Heed all warnings. 4) Follow all instructions. 5) Do not use this appliance near water. 6) Clean only with a dry cloth. 7) Do not block any of the ventilation openings that were installed in accordance with the manufacturer s instructions. 8) Do not install near any heat sources such as radiators, heat registers, stoves, or other appliances (including amplifiers) that produce heat. 9) Do not defeat the safety purpose of the polarized or grounding-type plug. A polarized plug has two blades with one wider than the other. A grounding type plug has two blades and a third grounding prong. The wide blade or the third prong is provided for your safety. If the plug provided does not fit into your outlet, consult an electrician to ensure replacement of the obsolete outlet. 10) Protect the power cord from being walked on or pinched, particularly at plugs, convenience receptacles, and the point where it exits from the appliance. 11) Only use attachments/accessories specified by the manufacturer. 12) Use only with the cart, stand, tripod, bracket, or table specified by the manufacturer, or sold with the appliance. If using a cart, be careful when moving the cart/appliance combination to avoid injury from tip-over (Figure 1). 13) Unplug this appliance during lightning storms or when unused for long periods of time. 14) Refer all servicing to qualified service personnel. Servicing is required when the appliance has been damaged in any way, for example, the power-supply cord or plug is damaged, liquid has been spilled or objects have fallen inside the appliance, the appliance has been exposed to rain or moisture, does not operate normally, or has been dropped. WARNING: To reduce the risk of fire or electric shock, do not expose this appliance to rain or moisture. CAUTION: The appliance should not be exposed to drips or splashes of water. Objects filled with liquids, such as vases, should not be placed on the appliance

3 Box content: USB audio Interface Prodipe Studio 22 Pro USB cable DVD-ROM with installation software's and ASIO 2 Prodipe's driver. Front panel: Inputs: "Combo" input microphone/instrument jack 6,35 mm and XLR. This connector lets you use jack ¼" mono unbalanced connectors (high-impedance signals like instruments) as well as XLR connectors (low-impedance signals like microphones) Phantom power switch and LED indicator. Lets you (pushed position, LED lighted) send a 48 V power to the XLR connectors that some microphones (statics, condenser) require. Attention: connect the "phantom powered" microphone before pushing this button, and wait few seconds before using the microphone (the time for the power to reach its nominal value). High-impedance switch Lets you use (pushed position, LED lighted) a high-impedance audio source (guitar for ex.) on the jack ¼" of the combo connector. When the switch is off (LED off), line input levels are accepted (a keyboard for example). Input gain level knob. This knob lets you adjust the level of the audio input signal. Peak LED indicator. This LED lights on when the input signal is too high. Reduce the input level with the Input gain level knob if it stays lighted while

4 Front panel: Outputs and monitoring: Output gain level knob (Line out). Lets you adjust the output level of the lines connectors located on the rear panel of the audio interface. Mix input/playback knob. This knob lets you select which signals to listen on the headphone connector: When completely turned left ("IN" label), you only hear the input signals from the interface itself. When completely turned right ("OUT" label), you only hear the signals coming from the computer. It lets you also (intermediate positions) hear a mix of the inputs signals from the interface itself and those coming from the computer. This lets you check the quality / levels of the signals recorded. Using this knob does not affect the output signals of the output connectors located on the rear of the audio interface. Output gain level knob (Headphones / Monitoring). Lets you adjust the output level of the headphones connector. Headphone ¼" stereo connector. You can adjust the output level of the headphones with the "MONITOR" knob. Power LED indicator. This LED lights on when the audio interface is correctly powered by the host computer (USB) or by an external power unit (optional).

5 Rear panel: Outputs: RCA unbalanced line out connectors (right and left channels). These signals are identical to those presented to the output ¼" jacks connectors. ¼" jack balanced line out connectors (right and left channels). These signals are identical to those presented to the output RCA connectors. Inputs: RCA unbalanced line in connectors (right and left channels). The signals (line inputs) that you use on these connectors are mixed with the front inputs.

6 Rear panel: MIDI : MIDI OUT connector(and MIDI Out activity LED). Connect here an output MIDI device (expander, MIDI synthesizer, etc.). Attention: connect this MIDI Out connector to the MIDI In connector of the MIDI device connected. MIDI IN connector (and MIDI In activity LED). Connect here an input MIDI device (keyboard or MIDI controller, MIDI drum, etc.). Attention: connect this MIDI IN connector to the MIDI Out connector of the MIDI device connected. USB and External power unit (optional): USB connector (and USB power LED indicator). Connect here the USB cable (provided) to your computer. External power unit connector (optional, not provided). You can use an external power unit (5 Volts DC, 1 Ampere, ) if the power delivered by the computer is too low, or if you experience instability of the audio interface.

7 Technical specifications: 2 audio inputs / 2 audio outputs 1 MIDI input / 1 MIDI output Professional audio quality (high quality electronic components) USB connection (1.1 and 2.0 compatible) "Plug and play" (no driver needed) 2 combo inputs (XLR + jack ¼") THD+N : 0,01% (Total Harmonic Distortion + Noise) SNR : 89dB (Signal Noise Ratio) Microphone preamps with antialias filters and LCF Phantom power switch on each input HiZ switch on each input Gain input on each input Overhead LED on each input 2 RCA line inputs, mixed with the front inputs 2 jack outputs ¼" balanced coupled with 2 RCA connectors THD+N : 0,005% (Total Harmonic Distortion + Noise) SNR : 96dB (Signal Noise Ratio) Dynamic range : 93 db LPF filter 1 stereo headphone output ¼" Monitoring mix knob direct<>play 1 MIDI input (16 channels) 1 MIDI output (16 channels) Self-powered thru USB connector 5V DC / 1A (power supply optional, depending on the power available on the USB connector ) Windows XP, Vista, Seven or higher and MAC OS X compatible (no driver needed) Shipped with the "Prodipe ASIO 2" driver for Windows including the "Audio Merge" function (lets you use several Prodipe audio interfaces concurrently in your ASIO 2 compatible applications) ASIO 2 latency less than 2ms on input and output

8 IPE Music 20, rue Clément ADER Z.A. Les Gloriets OLONNE SUR MER France