M CC DL5221 THRU DL5267

Transcription

1 M CC omponents Marilla Street Chatsworth DL5221 THRU DL5267 Features Wide Voltage Range Available Glass Package High Temp Soldering: 260 C for 10 Seconds At Terminals Surface Mount Package Marking : Cathode band denotes polarity Lead Free Finish/RoHS Compliant(Note 1) ("P" Suffix designates Compliant. See ordering information) Maximum Ratings Operating Temperature: -65 C to +175 C Storage Temperature: -65 C to +175 C 500 mwatt DC Power Dissipation Power Derating: 4.0mW/ C above 50 C Forward 200mA: 1.1 Volts Moisture Sensitivity Level 1 Figure 1 - Typical Capacitance mw Zener Diode 2.4 to 75 Volts MINIMELF B Cathode Mark C A pf 10 At zero volts Typical Capacitance (pf) versus Zener voltage (V Z ) Figure 2 - Derating Curve 400 V Z At 2 Volts V R DIMENSIONS INCHES MM DIM MIN MAX MIN MAX NOTE A B C SUGGESTED SOLDER PAD LAYOUT mw Temperature C Power Dissipation (mw) - Versus - Ambient Temperature C Note:1.Lead in Glass Exemption Applied, see EU Directive Annex 5. Revision: A 1of5

2 M CC PART NUMBER NOMINAL ZENER VOLTAGE V I ZT TEST CURRENT I ZT MAXIMUM ZENER IMPEDANCE B SUFFIX ONLY MAXIMUM REVERSE LEAKAGE CURRENT Z I ZT Z ZK = 0.25mA I V R VOLTS ma OHMS OHMS µa VOLTS % / C MAX. ZENER VOLTAGE TEMP COEFFICIENT B SUFFIX ONLY DL DL DL DL DL DL DL DL DL ±0.055 DL ±0.030 DL ±0.030 DL DL DL DL DL DL DL DL DL DL DL DL DL DL DL DL DL DL DL DL DL DL DL DL DL DL DL DL DL DL DL DL DL DL DL DL NOTE 1: Table as shown lists type numbers, which indicate a tolerance of ±20% with guaranteed limits on only Vz, I R, and V F. Devices with guaranteed limits on all six parameters are indicated by suffix A for ±10%, B for ±5%, C for ±2% tolerance NOTE 2: The electrical characteristics are measured after allowing the device to stabilize for 20 seconds. NOTE 3: Temperature coefficient (á VZ). Test conditions for temperature coefficient are as follows: a. I ZT = 7.5mA, T I = 25 o CT 2 = 125 o C (DL5221 thru DL5242) b. I ZT = Rated I ZT, T I = 25 o C, T 2 = 125 o C (DL5243 thru DL5267) Device to be temperature stabilized with current applied prior to reading breakdown voltage at the specified ambient temperature. Revision: A 2of5

3 Characteristics (T j =25 unless otherwise specified) Figure 1. Zener Voltage versus Zener Current Vz=1 thru 16 Volts Figure 2. Zener Voltage versus Zener Current Vz=15 thru 30 Volts Revision: A 3 of 5

4 Characteristics (T j =25 unless otherwise specified) Figure 3. Zener Voltage versus Zener Current Vz=30 thru 75 Volts Figure 4. Thermal resistance from junction to ambient as a function of pulse duration Revision: A 4 of 5

5 Ordering Information : Device Part Number-TP Packing Tape&Reel: 2.5Kpcs/Reel ***IMPORTANT NOTICE*** Corp. reserves the right to make changes without further notice to any product herein to make corrections, modifications, enhancements, improvements, or other changes. Corp. does not assume any liability arising out of the application or use of any product described herein; neither does it convey any license under its patent rights,nor the rights of others. The user of products in such applications shall assume all risks of such use and will agree to hold Corp. and all the companies whose products are represented on our website, harmless against all damages. ***LIFE SUPPORT*** 's products are not authorized for use as critical components in life support devices or systems without the express written approval of Corporation. ***CUSTOMER AWARENESS*** Counterfeiting of semiconductor parts is a growing problem in the industry. () is taking strong measures to protect ourselves and our customers from the proliferation of counterfeit parts. strongly encourages customers to purchase parts either directly from or from Authorized Distributors who are listed by country on our web page cited below. Products customers buy either from directly or from Authorized Distributors are genuine parts, have full traceability, meet 's quality standards for handling and storage. will not provide any warranty coverage or other assistance for parts bought from Unauthorized Sources. is committed to combat this global problem and encourage our customers to do their part in stopping this practice by buying direct or from authorized distributors. 5 of 5 Revision: A 3