S-LINE. Indicator-totaliser with universal input. Modular Indicator - Totaliser CONVERTERS AND INTERFACES

Transcription

1 CONVERTERS AND INTERFACES S-LINE Indicator-totaliser with universal input Modular Indicator - Totaliser Display LED 4, 6, 8, 4+7 digit Input: ma, V, potentiometer, Pt00, TC (J, K, R, S, T, B, E, N) Output: - analogue ma/v - digital, npn View of the instantaneous and/or integrated input value Power supply Vac; 0-40 Vdc / 9-28 Vac Power for transducers Data retention on EPROM type memory Optional: nr 2 SPDT relay alarms, RS485 ModBUS RTU interface, reset

2 TECHNICAL DATA K09PT Indicator - totalizer PT00 converter ORDER CODES Modello S3A Indicator-totaliser with digital / frequency input GENERAL FEATURES Power supply Max consumption S3A-XX-L: 0-40 Vdc, 9-28 Vca Hz, max 3W S3A-XX-H: Vac Hz, max 3W 3 W Display Power Supply -H -L Options -O /T 4 digits 6 digits 8 digits 4+7 digits Vac 0-40 Vdc / 9-28 Vac Optional card with serial output RS485 Modbus isolatedand 2 alarms relay + optoisolated digital input Cabling and configuration service Trasducers Power Supply Max 8 V, 25 ma OUTPUT DATA Rejection Hz Analogue channels CPU Memories Front Buttons Errors on display Accuracy INPUT DATA 8 bit EEPROM data memory 0 years VISUALIZATION AND MEASUREMENT Display Status indicators Stability Linearity Cold junction Channel Type and range Resolution Frequency Reset LED 4, 6, 8, (4+7) figures 2 alarms led on threshold Three buttons for navigation Alarm, burn-out 0,% 0,0%/K 0,2 C (Pt00) 0,5 C (TC J,K,E,T,N) C (TC R, S) 2 C (TC B) 0,05% (0-0 V, 0-20 ma) ±,5 C Voltage 0 0 V Current active/passive (0-20 ma) Potentiometer: (K 00K) Pt00 2,3,4 wires (IEC 75 / EN 6075 ITS90) Thermocouple J, K, R, S, T, B, E, N 4 bit Minimum sampling 20 ms Yes: by digital input and by front buttons Type and Range 0-0 V (min K) 0-20 / 4-20 ma (max 500 ohm) Impedance Risolution Trasducers Power Supply Optional Card THERMOMECHANIC DATA Functioning Temperature NA points Yes, max 20 ma N serial output ModBus RTU Slave RS485 + N 2 relay output SPDT 220 Vac 5A (resistive load), 2A (inductive load) + n digital input with reset function C Stocking Temperature C Umidity min 30% max 90% not condensing Case PPO autoextinguish by DIN Front Protection IP65 Terminals Extraction, step 5 Dimensions Drill Gauge Dimensions Weight SETTINGS AND RULES Software Settings Menu Integrate External Buttons 96x48x98 mm 9x45 mm 200 g Input type, end-scale, start-scale, decimal point, visualization end-scale, visualization start-scale, filter time, alarm threshold, hysteresis (alarm), activationdeactivation alarms delay, type and scale output retransmitted, parametres ModBUS (address, parity, delay, baud rate), contrast and display brightness, burn-out thermocouple and Pt00, integrator visualization, reset totalizer Dip Switch Settings Cabling Compliance No Yes, in factory EN /2002, EN /2005, EN 600-/200

3 FUNCTIONS Pulse output RS485 Modbus V/I output 2 relay Alarm Universal input + + TC RTD V ma R 2 rows display Double functionality: indicator and totaliser 4 different display for all kind of application: you can create your personal indicator (how many digit do you need?)

4 DIMENSIONS CONNECTIONS POWER SUPPLY AND INPUT ANALOG OUTPUT AND OPTIONAL CARD S3A_0803EN

5 Digital display, ma / V input High Accuracy Max error 0,05% A/D resolution 6 bit Thermal Stability 0,005% %/ K Input Voltage 0-0 V and current 0-20 ma, settable on different scales as (-5 V, 4-20 ma, etc.) Power Transducers 6 V, 25 ma Power Supply 0-40 Vdc, 9-28 Vac Setting Front Key Buttons, protected by a password Small dimensions 96 x 48 x 40 mm Operating Temperature C Special Version Available in IP66 housing too For further information, please visit

6 ORDER CODE Model S3AK-L 4 digits panel meter, ma/v analog input, power supply 0-40 Vdc, 9-28 Vac S3AK-L/IP66 Loop powered display, 4..20mA input (IP66 housing) TECHNICAL SPECIFICATIONS GENERAL FEATURES Power Supply 0-40 Vdc, 9-28 Vac (50-60 Hz) THERMOMECCANICAL FEATURES Operating Temperature C Max consumption 0,9 W Storing Temperature C Transducer Power Supply Max 6 V, 25 ma Humidity Min 30%, max 90% (non condensing Galvanic Isolation.500 Vac tra porta di misura e alimentazione Housing PPO autoextinguish, DIN ADC resolution 6 bit ( points) Memory EEPROM, 0 years DYSPLAING AND MEASURE Display LED, 4 digits Front buttons 3 (down, up, menù) Accuracy 0,05% Protection degree Terminals Dimension (wxhxd) Hole dimension Weight IP65 Screw terminals: 2 ways / 5,08 mm (power supply) 3 ways / 5,08 mm (input) 96 x 48 x 40 mm 9x45 mm 200 g Thermal stability Linearity INPUT Channels Range and type 0,005%/ K 0,05% (0-0 V, 0-20 ma) Voltage: 0-0 V (protection ±30 Vdc), imped. ~25 k, ADC 6 bit, settable scales: 0-0, -5 V etc. Current: 0-20 ma (protection ±25 ma), imped. ~20, ADC 6 bit, settable scales 0-20, 4-20 ma etc. SETTINGS AND NORMS Settings Access protection Conformity Norms Password, input type, start / full electric scale, start /full display scale, decimal point, filter level Through password CE EN , EN , EN 600-, EN LAYOUT AND DIMENSION ELECTRICALL CONNECTION Buttons position (side part) Power supply Current input with external power supply Current input with power supplied by S3AK Dimension Terminal block Voltage input Voltage input with power supplied by S3AK S3AK_00_EN

7 CONVERTERS AND INTERFACES S-LINE S3D Indicator-totaliser with universal digital input S-L LINE Modular Indicator - Tot taliser Display LED 4, 6, 8, 4+7 digit Input: Reed, npn 2 wires, npn 24 V (3 wires), pnp 24 V (3 wires), NAMUR, Photoelectric, Hall, 24 V Input, TTL, Variable Reluctancee Output: - analogue ma/v - digital, npnn View of the instantaneous and/or integrated input value Power supply Vac; 0-40 Vdc / 9-28 Vac Power for transducers Increment or decrement totalizing of the digital input signal Optional: nr 2 SPDT relay alarms, RS485 ModBUS RTU interface, reset

8 TECHNICAL DATA K09PT Indicator - totaliser PT00 converter GENERAL FEATURES Power supply Max consumption Trasducers Power Supply Rejection S3D-XX-L: 0-40 Vdc, 9-28 Vac Hz, max 3W S3D-XX-H: Vac Hz, max 3W 3 W Max 7 V Hz ORDER CODES Modello S3D Display Power Supply -H -L Options -O OUTPUT DATA Analogue channels /T Indicator-totaliser with digital / frequency input 4 digits 6 digits 8 digits 4+7 digits Vac 0-40 Vdc / 9-28 Vac Optional card with serial output RS485 Modbus isolatedand 2 alarms relay + optoisolated digital input Cabling and configuration service CPU Memories Front Buttons Errors on display Accuracy INPUT DATA 8 bit EEPROM data memory 0 years VISUALIZATION AND MEASUREMENT Display Status indicators Stability Frequency range LED 4, 6, 8, (4+7) figures 2 alarms led on threshold Three buttons for navigation Alarm, burn-out 0,% 0,0%/K Frequency resolution 0,05% Channel Type and range Reset 0,0005 Hz..0KHz - Reed - npn 2 wires - npn 24 V (3 wires) - pnp 24 V (3 wires) - NAMUR - Photoelectric - Hall - 24 V Input - TTL - Variable Reluctance Yes: by digital input and by front buttons Type and Range 0-0 V (min K) 0-20 / 4-20 ma (max 500 ohm) Impedance A/D Resolution Trasducers Power Supply Optional Card THERMOMECHANIC DATA OperatingTemperature NA points Yes, max 20 ma N serial output ModBus RTU Slave RS485 + N 2 relay output SPDT 220 Vac 8A (resistive load), 2A (inductive load) + n digital input with reset function C Storage Temperature C Umidity min 30% max 90% not condensing Case PPO autoextinguish by DIN Front Protection IP65 Terminals Extraction, step 5 Dimensions Drill Gauge Dimensions Weight SETTINGS AND RULES Software Settings Menu Integrate External Buttons 96x48x98 mm 9x45 mm 200 g Input type, end-scale, start-scale, decimal point, visualization end-scale, visualization start-scale, filter time, alarm threshold, hysteresis (alarm), activationdeactivation alarms delay, type and scale output retransmitted, parametres ModBUS (address, parity, delay, baud rate), contrast and display brightness, burn-out thermocouple and Pt00, integrator visualization, reset totalizer Dip Switch Settings Cabling Compliance No Yes, in factory EN /2002, EN /2005, EN 600-/200

9 FUNCTIONS Pulse output RS485 Modbus V/I output 2 relay Alarm Universal input CONNECTIONS Reed, NPN, PNP, Namur, Photolectric, Hall, TTL, 24V, Variable Reluctance POWER SUPPLY AND INPUT ANALOG OUTPUT AND OPTIONAL CARD S3D_0904EN

10 Loop powered display, 4-20 ma input EN EN EN 600- High Accuracy Max error 0,05%, A/D resolution 6 bit Thermal Stability 0,005% %/ K Input Current 4-20 ma Power supply by the input loop (max 30 V) Max Voltage drop 7 V Settings Front Key Buttons, protected by a password Small dimension 96x48x40 mm Operating temperature C Special Version Available in IP66 housing too For further information, please visit

11 ORDER CODE Model S35 S35/IP66 Loop powered display, 4..20mA input Loop powered display, 4..20mA input (IP66 housing) TECHNICAL SPECIFICATIONS GENERAL FEATURES Power supply By the input loop (max 30 V) THERMOMECHANICS FEATURES Operating temperature C Voltage drop Max 7 V [6,2 V + (50 * 4-20 ma)] Storing temperature C ADC resolution 6 bit ( points) Humidity Min 30%, max 90% not condensing Memory EEPROM, 0 years Housing PPO auto extinguish, DIN DYSPLAING AND MEASURE Display LED, 4 digits Front buttons 3 (down, up, menù) Protection degree Terminal blocks Dimensions (wxhxd) IP65 Screws: 2 ways (power supply) 96 x 48 x 40 mm Accuracy 0,05% Hole dimension 9x45 mm Thermal stability 0,005%/ K Weight 200 g Linearity 0,05% Electromagnetic interf. Error warning < % Value > 3% of full scale or greater than 9999 Value < 3% of start scale or lower than SETTINGS AND NORMS Settings (menù buttons) Password, input type, start / full electric scale, start /full display scale, decimal point, filter level INPUT Access protection Through password Channel Conformity CE Type and range Current (4-20 ma) Norms EN , EN , EN 600-, EN LAYOUT AND DIMENSION Buttons position (side part) Terminal block (with power supply & signal input) Dimension S35_00_EN