CATIA Training. Structure Design. Detailed Steps. February 2002 EDU-CAT-E-STD-FS-V5R8

Size: px
Start display at page:

Download "CATIA Training. Structure Design. Detailed Steps. February 2002 EDU-CAT-E-STD-FS-V5R8"

Transcription

1 CATIA Training Version 5 Release 8 February 2002 EDU-CAT-E-STD-FS-V5R8

2 Table of Contents Boring Fixture3 Step (1): Create a Grid4 Step (2): Place Members5 Step (3): Create Planar Elements16 Step (4): Create Joints22 Step (5): Modify Your Design22 2

3 Boring Fixture The intent of the first part of this step-by-step exercises book is to let you practice the various ways of using the workbench for designing jig, foundation or other tooling The other part of the exercises book will enable you to enrich your tooling with using catalog parts and extract documents like BOMs or drawings 3

4 Step (1): Create a Grid We will first open the Boring_Fixture CATProduct 1 Select the File + Open menu 2 Look in Step1 directory 3 Select Boring_Fixture CATProduct in Step1 4 Click on Open 4

5 We will now place the grid 5 Select the Grid icon 6 Define the grid as shown in the picture below 7 Click on OK Step (2): Place Members 5

6 Next we will place members (beams) using the grid as support If you don t succeed in creating the grid in step1, open Boring_Fixture CATProduct stored in \Data_Student\Step2 directory 1 Double-click on Member on Support Icon We need first to select a section in the EN catalog of profiles 2 Select Other Section in Section: field as shown in the picture below 3 Browse to open the EN catalog 6

7 4 Select the Square tubes family in the EN catalog 5 Select TUBEC250x120 in the sections list 6 Click on OK 7

8 7 Define the member to place as shown in the picture below 8 Place Beam_1 as shown below 9 Place Beam_2 as shown below 10 Place Beam_3 as shown below 8

9 We will now carry on member placement with Infill menu 11 Double-click on Infill icon 12 Select a new section TUBEC180x100 in the EN catalog 13 Define infilling members as shown below 14 Select Beam_3 as reference 1 and Beam_2 as reference 2 15 Click on OK 9

10 16 Modify the definition of the other infill to be created as shown below Next we will use Member menu to carry out member placement 17 Select Member icon 10

11 18 Define member as shown below 19 Place Beam_6 as shown below using intersection points of the grid 20 Place Beam_7 as shown below using intersection points of the grid 11

12 21 Place Beam_8 as shown below using intersection points of the grid 12

13 22 Define a new direction and a length value for the next two beams 23 Place Beam_9 as shown below using intersection point of the grid as start point 24 Place Beam_10 as shown below using intersection point of the grid as start point Both last ones! 13

14 25 Define member and direction 26 Select the free extremity of the left vertical beam as shown below 27 Select Point Definition icon 14

15 28 Select Point on Member 29 Select the vertical beam: TUBEC250x Key-in 1500 in the Offset field or slide the Offset handler 31 Repeat on the right side with a Top Left anchor point 32 Hide the grid 15

16 Step (3): Create Planar Elements We will now place all the plates, end plates and gussets using the Plate and End Plate menus If you don t succeed in placing members in step2, open Boring_Fixture CATProduct stored in \Data_Student\Step3 directory 1 Select the Plate icon 2 Select the support for the plates as shown in the picture below 3 Key-in 20 for Thickness 4 Select the Sketch icon 5 Select the Rectangle icon 6 Sketch the first plate as shown below 16

17 7 Select the Exit icon 8 Click on Reverse Direction 9 Click on OK 10 Repeat steps 42 to 50 on the right We are now going to create gussets 11 Select again the Plate icon 12 Select Gusset as type 13 Select the support for the plates as shown in the picture below 14 Select the Sketch icon 15 Select the Right View icon 16 Select the Profile icon 17

18 17 Sketch the gusset profile as shown in pictures 18 Select the Exit icon 19 Click on Reverse Direction 20 Click on OK 21 Repeat steps 48 to 56 on the right 18

19 We would like now instantiate both right and left gussets 4 times To do that, as Structural plates are CATPart, we will use the Assembly Design workbench 22 Activate Boring_Fixture 23 Select the Assembly Design workbench icon 24 Select the Define Multi Instantiation icon 25 Select the gusset in the Product tree 26 Key-in 4 as New Instance(s) 27 Key-in 300 as Spacing 28 Click on the Y Direction icon in the Reference Direction frame 29 Click on Reverse in the Reference Direction frame 30 Click on OK 31 Repeat steps 60 to 66 on the right Return to workbench 32 Select the workbench icon 33 Select the Plate icon 19

20 34 Select the support for the plates as shown in the picture below 35 Key-in 20 for Thickness 36 Select the Sketch icon 37 Select the Rectangle icon 38 Sketch the plate as shown in the picture 39 Select the Exit icon 40 Click on Reverse Direction (if needed) 41 Click on OK 42 Repeat steps 70 to 77 for the two last plates 20

21 And to finish with plates, we will place now the two end plates on top of the vertical beams 43 Double-click on the End Plate icon 44 Key-in 250 for Length and Width 45 Key-in 5 for Thickness 46 Select the free extremities of the vertical beams using Ctrl-Click 47 Click on OK 21

22 Step (4): Create Joints We will now cut all the beams using the Join menu If you don t succeed in creating planar elements in step3, open Boring_Fixture CATProduct stored in \Data_Student\Step4 directory 1 Double-click on Join icon 2 Select Miter cut as Type 3 Select member to trim 4 Select trimming member 5 Click on OK 6 Repeat steps 87 to 90 for each miter cut as indicated in the Exercises book 7 Select Weld cut as Type and do the same operation as for miter cut 8 Save and Close Boring_Fixture Step (5): Modify Your Design 22

23 This last exercise will enable us to modify interactively the boring fixture by stretching the grid-support We will first insert the Boring_Fixture CATProduct in the Boring_Jig main product 1 Select the File + Open menu 2 Look in Step5 3 Select Boring_Jig CATProduct 4 Click on Open 5 Select Boring_Jig with MB3 23

24 6 Select Existing Component in the contextual menu 7 Look in Step5 directory 8 Select Boring_Fixture CATProduct 9 Click on Open You can also insert the Boring_Fixture CATProduct you saved in the previous step 24

25 All right, let us associate the two products now! 10 Select the Assembly Design workbench icon 11 Select the Manipulation icon 12 Select the Z Direction icon 13 Drag upward as shown in the picture above 25

26 14 Select the Smart Move icon 15 Check the Automatic constraint creation option 16 Select one edge of the base plate of Boring_Fixture product as shown below 17 Move Boring_Fixture to reach the edge of the base plate of Base product as shown below 26

27 A coincidence constraint is created 18 Click on OK 19 Repeat steps 105 to 109 on the front adjacent edges 27

28 And finally, to finish, let us stretch the grid! We shall maybe need to make it visible 20 Double-Click twice on the highlighted plane as shown below 21 Click on the Offset field with MB3 22 Select Measure in the contextual menu 28

29 23 Select first element as shown below 24 Select second element as shown below 25 Select the Minimum distance value and press <Ctrl+c> 26 Click on Close 27 Click on No 29

30 28 Key-in + next to 1280mm value in the Offset field 29 Press <Ctrl+v> 30 Click on OK 30

Structure Design. Preface What's New? Getting Started Basic Tasks Advanced Tasks Workbench Description Customizing Glossary Index

Structure Design. Preface What's New? Getting Started Basic Tasks Advanced Tasks Workbench Description Customizing Glossary Index Structure Design Preface What's New? Getting Started Basic Tasks Advanced Tasks Workbench Description Customizing Glossary Index Dassault Systèmes 1994-2000. All rights reserved. Preface CATIA Version

More information

Weld Design. CATIA V5 Training Foils. Weld Design. Copyright DASSAULT SYSTEMES 1. Instructor Notes:

Weld Design. CATIA V5 Training Foils. Weld Design. Copyright DASSAULT SYSTEMES 1. Instructor Notes: CATIA V5 Training Foils Weld Design Version 5 Release 19 January 2009 EDU_CAT_EN_WD1_FI_V5R19 1 About this course Objectives of the course Upon completion of this course you will be able to: - Weld parts,

More information

Understand the Sketcher workbench of CATIA V5.

Understand the Sketcher workbench of CATIA V5. Chapter 1 Drawing Sketches in Learning Objectives the Sketcher Workbench-I After completing this chapter you will be able to: Understand the Sketcher workbench of CATIA V5. Start a new file in the Part

More information

Part Design. Page 1 1997 2001 DASSAULT SYSTEMES. IBM Product Lifecycle Management Solutions / Dassault Systemes

Part Design. Page 1 1997 2001 DASSAULT SYSTEMES. IBM Product Lifecycle Management Solutions / Dassault Systemes Part Design Page 1 Tutorial Objectives Description This tutorial is an introduction to Part Design. Message This tutorial illustrates how CATIA can Design precise 3D mechanical parts with an intuitive

More information

Generative Drafting. Page 1 1997 2001 DASSAULT SYSTEMES. IBM Product Lifecycle Management Solutions / Dassault Systemes

Generative Drafting. Page 1 1997 2001 DASSAULT SYSTEMES. IBM Product Lifecycle Management Solutions / Dassault Systemes Generative Drafting Page 1 Tutorial Objectives Description This Tutorial is an introduction to Generative Drafting. Message To show how CATIA V5 allows the user to automatically generate associative drafting

More information

CATIA Electrical Harness Design TABLE OF CONTENTS

CATIA Electrical Harness Design TABLE OF CONTENTS TABLE OF CONTENTS Introduction...1 Electrical Harness Design...2 Electrical Harness Assembly Workbench...4 Bottom Toolbar...5 Measure...5 Electrical Harness Design...7 Defining Geometric Bundles...7 Installing

More information

CATIA Drafting TABLE OF CONTENTS

CATIA Drafting TABLE OF CONTENTS TABLE OF CONTENTS Introduction...1 Drafting...2 Drawing Screen...3 Pull-down Menus...4 File...4 Edit...5 View...6 Insert...7 Tools...8 Drafting Workbench...9 Views and Sheets...9 Dimensions and Annotations...10

More information

SolidWorks: Mirror, Revolve, and. Introduction to Robotics

SolidWorks: Mirror, Revolve, and. Introduction to Robotics SolidWorks: Mirror, Revolve, and Circular Pattern Introduction to Robotics Let s Review At this point we have learned the following: Extrude Boss/Base Extruded Cut Adding Relations and Dimensions Linear

More information

Speaker Drafting. Page 1 1997 2001 DASSAULT SYSTEMES

Speaker Drafting. Page 1 1997 2001 DASSAULT SYSTEMES Speaker Drafting Page 1 Tutorial Objectives Description This Tutorial is an introduction to Assembly Drafting. Message To show how CATIA V5 allows the user to automatically generate associative drafting

More information

SolidWorks Tutorial 4 CANDLESTICK

SolidWorks Tutorial 4 CANDLESTICK SolidWorks Tutorial 4 CANDLESTICK Candlestick In this tutorial you will make a simple container and a candlestick out of sheetmetal. You will learn about working with sheet metal in SolidWorks. We will

More information

Introduction to CATIA V5

Introduction to CATIA V5 Introduction to CATIA V5 Release 16 (A Hands-On Tutorial Approach) Kirstie Plantenberg University of Detroit Mercy SDC PUBLICATIONS Schroff Development Corporation www.schroff.com www.schroff-europe.com

More information

Getting Started with CATIA Version 5

Getting Started with CATIA Version 5 WB Getting Started with CATIA Version 5 Page 1 CATIA User Interface Let s review the following key features: Multi-document support Standard and specific menus & toolbars (File, Edit, Insert, ) Standard

More information

Sheet Metal Design. Preface What's New? Getting Started Basic Tasks Workbench Description Customizing Glossary Index

Sheet Metal Design. Preface What's New? Getting Started Basic Tasks Workbench Description Customizing Glossary Index Sheet Metal Design Preface What's New? Getting Started Basic Tasks Workbench Description Customizing Glossary Index Dassault Systèmes 1994-99. All rights reserved. Preface The V5 CATIA - Sheet Metal Design

More information

Wireframe and Surface

Wireframe and Surface Wireframe and Surface Preface What's New Getting Started Basic Tasks Workbench Description Glossary Index Dassault Systèmes 1994-99. All rights reserved. Preface CATIA Version 5 Wireframe and Surface allows

More information

Lab. 04. CAM - Computer Aided Manufacturing. ASSEMBLY DESIGN: Application for Part and Fixture Assembly for milling process. Academic Year 2014/2015

Lab. 04. CAM - Computer Aided Manufacturing. ASSEMBLY DESIGN: Application for Part and Fixture Assembly for milling process. Academic Year 2014/2015 Lab. 04 Academic Year 2014/2015 CAM - Computer Aided Manufacturing ASSEMBLY DESIGN: Application for Part and Fixture Assembly for milling process for Fixturing (Tooling) GOAL: - To be able to Assemble

More information

Pro/ENGINEER Wildfire 4.0 Basic Design

Pro/ENGINEER Wildfire 4.0 Basic Design Introduction Datum features are non-solid features used during the construction of other features. The most common datum features include planes, axes, coordinate systems, and curves. Datum features do

More information

SolidWorks Tutorial 3 MAGNETIC BLOCK

SolidWorks Tutorial 3 MAGNETIC BLOCK SolidWorks Tutorial 3 MAGNETIC BLOCK Magnetic Block In this exercise you will make a magnetic block. To do so, you will create a few parts, which you will assemble. You will learn the following new applications

More information

Introduction to Autodesk Inventor for F1 in Schools

Introduction to Autodesk Inventor for F1 in Schools F1 in Schools race car Introduction to Autodesk Inventor for F1 in Schools In this course you will be introduced to Autodesk Inventor, which is the centerpiece of Autodesk s Digital Prototyping strategy

More information

Interactive Drafting

Interactive Drafting Interactive Drafting Preface What's New Getting Started Basic Tasks Advanced Tasks Workbench Description Customizing Glossary Index Dassault Systèmes 1994-99. All rights reserved. Preface CATIA Version

More information

Introduction to Autodesk Inventor for F1 in Schools

Introduction to Autodesk Inventor for F1 in Schools Introduction to Autodesk Inventor for F1 in Schools F1 in Schools Race Car In this course you will be introduced to Autodesk Inventor, which is the centerpiece of Autodesk s digital prototyping strategy

More information

CATIA Functional Tolerancing & Annotation TABLE OF CONTENTS

CATIA Functional Tolerancing & Annotation TABLE OF CONTENTS TABLE OF CONTENTS Introduction...1 Functional Tolerancing and Annotation...2 Pull-down Menus...3 Insert...3 Functional Tolerancing and Annotation Workbench...4 Bottom Toolbar Changes...5 3D Grid Toolbar...5

More information

CATIA: Navigating the CATIA V5 environment. D. CHABLAT / S. CARO Damien.Chablat@irccyn.ec-nantes.fr

CATIA: Navigating the CATIA V5 environment. D. CHABLAT / S. CARO Damien.Chablat@irccyn.ec-nantes.fr CATIA: Navigating the CATIA V5 environment D. CHABLAT / S. CARO Damien.Chablat@irccyn.ec-nantes.fr Standard Screen Layout 5 4 6 7 1 2 3 8 9 10 11 12 13 14 15 D. Chablat / S. Caro -- Institut de Recherche

More information

NC Manufacturing. Page 1 1997 2001 DASSAULT SYSTEMES. IBM Product Lifecycle Management Solutions / Dassault Systemes

NC Manufacturing. Page 1 1997 2001 DASSAULT SYSTEMES. IBM Product Lifecycle Management Solutions / Dassault Systemes NC Manufacturing Page 1 Tutorial Objectives Demo Description This tutorial illustrates Manufacturing integration with other CATIA products. Product Demo (LMG / PMG) Messages Integration with CATIA V5 modelling

More information

CATIA Basic Concepts TABLE OF CONTENTS

CATIA Basic Concepts TABLE OF CONTENTS TABLE OF CONTENTS Introduction...1 Manual Format...2 Log on/off procedures for Windows...3 To log on...3 To logoff...7 Assembly Design Screen...8 Part Design Screen...9 Pull-down Menus...10 Start...10

More information

Chapter 9. Editing Features. Learning Objectives

Chapter 9. Editing Features. Learning Objectives Chapter 9 Editing Features Learning Objectives After completing this chapter, you will be able to: Edit features. Edit sketches of the sketch based features. Edit the sketch plane of the sketch based features.

More information

Part Design. Preface What's New? Getting Started Basic Tasks Advanced Tasks Workbench Description Customizing Glossary Index

Part Design. Preface What's New? Getting Started Basic Tasks Advanced Tasks Workbench Description Customizing Glossary Index Part Design Preface What's New? Getting Started Basic Tasks Advanced Tasks Workbench Description Customizing Glossary Index Dassault Systèmes 1994-99. All rights reserved. Preface The CATIA Version 5 Part

More information

SpaceClaim Introduction Training Session. A SpaceClaim Support Document

SpaceClaim Introduction Training Session. A SpaceClaim Support Document SpaceClaim Introduction Training Session A SpaceClaim Support Document In this class we will walk through the basic tools used to create and modify models in SpaceClaim. Introduction We will focus on:

More information

digital project V1,R4 Quick Start

digital project V1,R4 Quick Start digital project V1,R4 Quick Start Quick Starting Your Knowledge in Digital Project V1,R4 Nuri Miller May 2009 Copyright 2009 Gehry Technologies, Inc. Table of Contents Introduction...vi Creating a Part...2

More information

CATIA Wireframe & Surfaces TABLE OF CONTENTS

CATIA Wireframe & Surfaces TABLE OF CONTENTS TABLE OF CONTENTS Introduction... 1 Wireframe & Surfaces... 2 Pull Down Menus... 3 Edit... 3 Insert... 4 Tools... 6 Generative Shape Design Workbench... 7 Bottom Toolbar... 9 Tools... 9 Analysis... 10

More information

Chapter 1. Creating Sketches in. the Sketch Mode-I. Evaluation chapter. Logon to www.cadcim.com for more details. Learning Objectives

Chapter 1. Creating Sketches in. the Sketch Mode-I. Evaluation chapter. Logon to www.cadcim.com for more details. Learning Objectives Chapter 1 Creating Sketches in Learning Objectives the Sketch Mode-I After completing this chapter you will be able to: Use various tools to create a geometry. Dimension a sketch. Apply constraints to

More information

CATIA Tubing and Piping TABLE OF CONTENTS

CATIA Tubing and Piping TABLE OF CONTENTS TABLE OF CONTENTS Introduction...1 Manual Format...2 Tubing and Piping design...3 Log on/off procedures for Windows...4 To log on...4 To logoff...8 Pull-down Menus...9 Edit...9 Insert...12 Tools...13 Analyze...16

More information

Sketcher. Preface What's New? Getting Started Basic Tasks Customizing Workbench Description Glossary Index

Sketcher. Preface What's New? Getting Started Basic Tasks Customizing Workbench Description Glossary Index Sketcher Preface What's New? Getting Started Basic Tasks Customizing Workbench Description Glossary Index Dassault Systèmes 1994-99. All rights reserved. Preface CATIA Version 5 Sketcher application makes

More information

Knowledgebase Article

Knowledgebase Article Company web site: Support email: Support telephone: +44 20 3287-7651 +1 646 233-1163 2 EMCO Network Inventory 5 provides a built in SQL Query builder that allows you to build more comprehensive

More information

Merging Labels, Letters, and Envelopes Word 2013

Merging Labels, Letters, and Envelopes Word 2013 Merging Labels, Letters, and Envelopes Word 2013 Merging... 1 Types of Merges... 1 The Merging Process... 2 Labels - A Page of the Same... 2 Labels - A Blank Page... 3 Creating Custom Labels... 3 Merged

More information

Datum > Curve KIM,ME,NIU

Datum > Curve KIM,ME,NIU Datum > Curve Intersect First create at least one quilt on the surface of the model. Feature > Surface (> New) > Copy (do not use offset that creates a surface off the solid surface even with zero offset)

More information

511 - Creating Structural Frame Designs

511 - Creating Structural Frame Designs 4 th Generation VLC courtesy of Edison2 511 - Creating Structural Frame Designs Rahul Kulkarni, Manager, Product Design, Pune Center, Siemens PLM Software #SEU13 Agenda: 511 - Creating Structural Frame

More information

PowerPoint 2013: Basic Skills

PowerPoint 2013: Basic Skills PowerPoint 2013: Basic Skills Information Technology September 1, 2014 1 P a g e Getting Started There are a variety of ways to start using PowerPoint software. You can click on a shortcut on your desktop

More information

CATIA V5 Surface-modeling

CATIA V5 Surface-modeling CATIA V5 Surface-modeling (Tutorial 2-Mouse) GSD (Surface-modeling) Part Design (Solid-modeling) Assembly Design A- 1 CATIA Surface-modeling Tutorial 2A Import 2D outline drawing into Catia Build 3D curves

More information

2D Layout for 3D Design

2D Layout for 3D Design CATIA V5 Training Exercises 2D Layout for 3D Design Version 5 Release 19 August 2008 EDU_CAT_EN_LO1_FX_V5R19 1 Table of Contents Recap Exercise: Front Fork 2D Design 3 Do It Yourself 4 Recap Exercise:

More information

Using Microsoft Word. Working With Objects

Using Microsoft Word. Working With Objects Using Microsoft Word Many Word documents will require elements that were created in programs other than Word, such as the picture to the right. Nontext elements in a document are referred to as Objects

More information

Smart Board Notebook Software A guide for new Smart Board users

Smart Board Notebook Software A guide for new Smart Board users Smart Board Notebook Software A guide for new Smart Board users This guide will address the following tasks in Notebook: 1. Adding shapes, text, and pictures. 2. Searching the Gallery. 3. Arranging objects

More information

This Skill Builder demonstrates how to define and place sketched symbols in drawings.

This Skill Builder demonstrates how to define and place sketched symbols in drawings. Sketched Symbols This Skill Builder demonstrates how to define and place sketched symbols in drawings. A sketched symbol is a user-defined symbol. You create sketched symbols in the sketch environment

More information

What s New V 11. Preferences: Parameters: Layout/ Modifications: Reverse mouse scroll wheel zoom direction

What s New V 11. Preferences: Parameters: Layout/ Modifications: Reverse mouse scroll wheel zoom direction What s New V 11 Preferences: Reverse mouse scroll wheel zoom direction Assign mouse scroll wheel Middle Button as Fine tune Pricing Method (Manufacturing/Design) Display- Display Long Name Parameters:

More information

Pro/ENGINEER Wildfire 5.0 Introduction to Surface Modeling

Pro/ENGINEER Wildfire 5.0 Introduction to Surface Modeling Introduction Several advanced surface types are available as listed below. Variable Section Sweep Boundary Blend Section to Surfaces Blend Surface to Surface Blend A surface is created by sweeping a single

More information

CATIA for Design and Engineering. Version 5 Releases 14 & 15. David S. Kelley. Central Michigan University SDC

CATIA for Design and Engineering. Version 5 Releases 14 & 15. David S. Kelley. Central Michigan University SDC CATIA for Design and Engineering ersion 5 Releases 4 & 5 David S. Kelley Central Michigan University SDC PUBLICATIONS Schroff Development Corporation www.schroff.com www.schroff-europe.com TUTORIAL Extruded

More information

Product Structure Preface What's New? User Tasks

Product Structure Preface What's New? User Tasks Product Structure Preface Conventions What's New? User Tasks Entering the Product Structure Workbench Selecting Products only Selecting Modes Inserting a New Component Inserting a New Part Inserting a

More information

Microsoft Office PowerPoint 2013

Microsoft Office PowerPoint 2013 Microsoft Office PowerPoint 2013 Navigating the PowerPoint 2013 Environment The Ribbon: The ribbon is where you will access a majority of the commands you will use to create and develop your presentation.

More information

SolidWorks Implementation Guides. Sketching Concepts

SolidWorks Implementation Guides. Sketching Concepts SolidWorks Implementation Guides Sketching Concepts Sketching in SolidWorks is the basis for creating features. Features are the basis for creating parts, which can be put together into assemblies. Sketch

More information

Movie Maker 2 Beginning

Movie Maker 2 Beginning Movie Maker 2 Beginning Quick Overview...3 Preparing a Folder...3 Collecting Resources...3 Pictures...4 Screen Resolution...4 Starting Windows Movie Maker...4 Which Version?...4 Windows Movie Maker 2 Window...4

More information

Raising the Roof Creating Roofs in Revit David Cohn

Raising the Roof Creating Roofs in Revit David Cohn David Cohn AB322-1 Roofs are one of the most complex architectural elements to model, but with Revit you can create just about any type of roof. This class will explore the best methods for creating various

More information

Generative Shape Design

Generative Shape Design Generative Shape Design Preface What's New Getting Started Basic Tasks Advanced Tasks Workbench Description Glossary Index Dassault Systèmes 1994-99. All rights reserved. Preface CATIA Version 5 Generative

More information

Autodesk Fusion 360: Assemblies. Overview

Autodesk Fusion 360: Assemblies. Overview Overview In this module you will learn how different components can be put together to create an assembly. We will use several tools in Fusion 360 to make sure that these assemblies are constrained appropriately

More information

Solidworks Lesson 6 - Assembly & Part Drawings. UCF Engineering

Solidworks Lesson 6 - Assembly & Part Drawings. UCF Engineering Solidworks Lesson 6 - Assembly & Part Drawings UCF Engineering Mechanical Drawings So far we have been dealing with creating parts and assemblies in SolidWorks, however, when you go to get a part machined,

More information

How to Use the Drawing Toolbar in Microsoft Word

How to Use the Drawing Toolbar in Microsoft Word How to Use the Drawing Toolbar in Microsoft Word The drawing toolbar allows you to quickly and easily label pictures (e.g., maps) in a MS Word file. You can add arrows, circle spots, or label with words.

More information

WORKBOOK MODELING OF MULTI- MEMBER MACHINES

WORKBOOK MODELING OF MULTI- MEMBER MACHINES WORKBOOK MODELING OF MULTI- MEMBER MACHINES LUBLIN 2014 0 Author: Mirosław Ferdynus Desktop publishing: Mirosław Ferdynus Technical editor: Mirosław Ferdynus Figures: Mirosław Ferdynus Cover and graphic

More information

CATIA V5 Tutorials. Mechanism Design & Animation. Release 18. Nader G. Zamani. University of Windsor. Jonathan M. Weaver. University of Detroit Mercy

CATIA V5 Tutorials. Mechanism Design & Animation. Release 18. Nader G. Zamani. University of Windsor. Jonathan M. Weaver. University of Detroit Mercy CATIA V5 Tutorials Mechanism Design & Animation Release 18 Nader G. Zamani University of Windsor Jonathan M. Weaver University of Detroit Mercy SDC PUBLICATIONS Schroff Development Corporation www.schroff.com

More information

Real Time Rendering. Preface What's New Getting Started Basic Tasks Advanced Tasks Workbench Description Index

Real Time Rendering. Preface What's New Getting Started Basic Tasks Advanced Tasks Workbench Description Index Real Time Rendering Preface What's New Getting Started Basic Tasks Advanced Tasks Workbench Description Index Dassault Systèmes 1994-99. All rights reserved. Preface CATIA Version 5 Real Time Rendering

More information

[Not for Circulation]

[Not for Circulation] Using SMART Notebook SMART Notebook is software meant to supplement use with the SMART Board. The software helps users create interactive presentations, and offers a variety of ways to enhance presenting

More information

Creating Drawings in Pro/ENGINEER

Creating Drawings in Pro/ENGINEER 6 Creating Drawings in Pro/ENGINEER This chapter shows you how to bring the cell phone models and the assembly you ve created into the Pro/ENGINEER Drawing mode to create a drawing. A mechanical drawing

More information

Creating a Poster in PowerPoint 2010. A. Set Up Your Poster

Creating a Poster in PowerPoint 2010. A. Set Up Your Poster View the Best Practices in Poster Design located at http://www.emich.edu/training/poster before you begin creating a poster. Then in PowerPoint: (A) set up the poster size and orientation, (B) add and

More information

Sheet Metal Design: Beyond Bends and Flanges

Sheet Metal Design: Beyond Bends and Flanges 11/30/2005-8:00 am - 9:30 am Room:Pelican 1 (Swan) Walt Disney World Swan and Dolphin Resort Orlando, Florida Sheet Metal Design: Beyond Bends and Flanges Anthony B. Rodriguez - KETIV Technologies MA31-2

More information

Generative Shape Optimizer

Generative Shape Optimizer CATIA V5 Training Foils Generative Shape Optimizer Version 5 Release 19 January 2009 EDU_CAT_EN_GSO_FI_V5R19 1 About this course Objectives of the course Upon completion of the course you will learn to:

More information

TABLE OF CONTENTS. INTRODUCTION... 5 Advance Concrete... 5 Where to find information?... 6 INSTALLATION... 7 STARTING ADVANCE CONCRETE...

TABLE OF CONTENTS. INTRODUCTION... 5 Advance Concrete... 5 Where to find information?... 6 INSTALLATION... 7 STARTING ADVANCE CONCRETE... Starting Guide TABLE OF CONTENTS INTRODUCTION... 5 Advance Concrete... 5 Where to find information?... 6 INSTALLATION... 7 STARTING ADVANCE CONCRETE... 7 ADVANCE CONCRETE USER INTERFACE... 7 Other important

More information

CATIA V5 Surface Design

CATIA V5 Surface Design CATIA V5 Training Foils CATIA V5 Surface Design Version 5 Release 19 August 2008 EDU_CAT_EN_V5S_FI_V5R19 1 Lesson 1: Introduction to Generative Shape Design About this Course Introduction CATIA is a robust

More information

Figure 1 - Delta Theta Input Selection

Figure 1 - Delta Theta Input Selection Creating Cams in Pro/Engineer Wildfire Using DYNACAM Mechanical Engineering Mechanical Design Created by: David E. Yamartino M.S. Mechanical Engineering May 2004 April 12, 2004 Objective: The objective

More information

The following is an overview of lessons included in the tutorial.

The following is an overview of lessons included in the tutorial. Chapter 2 Tutorial Tutorial Introduction This tutorial is designed to introduce you to some of Surfer's basic features. After you have completed the tutorial, you should be able to begin creating your

More information

Piston Ring. Problem:

Piston Ring. Problem: Problem: A cast-iron piston ring has a mean diameter of 81 mm, a radial height of h 6 mm, and a thickness b 4 mm. The ring is assembled using an expansion tool which separates the split ends a distance

More information

How To Make A Solid Body In A Part Of A Part In A Model In A Toybox

How To Make A Solid Body In A Part Of A Part In A Model In A Toybox Imported Files Turning Surfaces into Solids in SolidWorks Problem Many times when you import a customer s part or assembly and it opens as a part that has a ton of surfaces or it may open as a multi level

More information

CATIA V5 Surface-modeling (Tutorial 8- Rebuild Audi R8)

CATIA V5 Surface-modeling (Tutorial 8- Rebuild Audi R8) CATIA V5 Surface-modeling (Tutorial 8- Rebuild Audi R8) Not For Commercial Use Surface-modeling Design with a Master Model A- 1 Design in Context Hard fillet Hard fillet Design Intent PictureSource: www.audi.com/r8

More information

Windows XP Pro: Basics 1

Windows XP Pro: Basics 1 NORTHWEST MISSOURI STATE UNIVERSITY ONLINE USER S GUIDE 2004 Windows XP Pro: Basics 1 Getting on the Northwest Network Getting on the Northwest network is easy with a university-provided PC, which has

More information

**If the box does not automatically pop up, see the next page.

**If the box does not automatically pop up, see the next page. This tutorial will show you how to insert the Embroidery CD into your computer and transfer the designs onto your USB stick. If your embroidery machine uses a different method (card reader or direct connect)

More information

Autodesk Fusion 360 Badge Guide: Design an F1 in Schools Trophy

Autodesk Fusion 360 Badge Guide: Design an F1 in Schools Trophy Autodesk Fusion 360 Badge Guide: Design an F1 in Schools Trophy Abstract: Gain basic understanding of creating 3D models in Fusion 360 by designing an F1 in Schools trophy. This badge may be claimed by

More information

Creating and Viewing Task Dependencies between Multiple Projects using Microsoft Project

Creating and Viewing Task Dependencies between Multiple Projects using Microsoft Project Creating and Viewing Task Dependencies between Multiple Projects using Microsoft Project Preliminary 1. You must have Microsoft Project 2003 or higher installed to complete these procedures. 2. If necessary,

More information

CONSTRUCTING SINGLE-SUBJECT REVERSAL DESIGN GRAPHS USING MICROSOFT WORD : A COMPREHENSIVE TUTORIAL

CONSTRUCTING SINGLE-SUBJECT REVERSAL DESIGN GRAPHS USING MICROSOFT WORD : A COMPREHENSIVE TUTORIAL CONSTRUCTING SINGLE-SUBJECT REVERSAL DESIGN GRAPHS USING MICROSOFT WORD : A COMPREHENSIVE TUTORIAL PATRICK GREHAN ADELPHI UNIVERSITY DANIEL J. MORAN MIDAMERICAN PSYCHOLOGICAL INSTITUTE This document is

More information

Kitchen and Bath Design Tutorial

Kitchen and Bath Design Tutorial Adding Cabinets Chapter 5: Kitchen and Bath Design Tutorial This tutorial continues where the Materials Tutorial left off. You should save this tutorial using a new name to archive your previous work.

More information

Creating Posters in Excel (2007 & 2010)

Creating Posters in Excel (2007 & 2010) Creating Posters in Excel (2007 & 2010) Although it would be nice to have a poster printer in each of our homes and work areas, having such a tool is unfortunately not something that will become a reality

More information

How To Create A Hyperlink In Publisher On Pc Or Macbookpress.Com (Windows) On Pc/Apple) On A Pc Or Apple Powerbook (Windows 7) On Macbook Pressbook (Apple) Or Macintosh (Windows 8

How To Create A Hyperlink In Publisher On Pc Or Macbookpress.Com (Windows) On Pc/Apple) On A Pc Or Apple Powerbook (Windows 7) On Macbook Pressbook (Apple) Or Macintosh (Windows 8 PUBLISHER-HYPERLINKS When a hyperlink in Publisher is clicked it can open another Web page, a picture, an email message, or another program. This feature works for documents that will be saved as a PDF

More information

USING WINDOWS MOVIE MAKER TO CREATE THE MOMENT BEHIND THE PHOTO STORY PART 1

USING WINDOWS MOVIE MAKER TO CREATE THE MOMENT BEHIND THE PHOTO STORY PART 1 PART 1 Windows Movie Maker lets you assemble a range of video, pictures, and sound elements to create a story. It is an application that comes with most PC computers. This tip sheet was created using Windows

More information

Make Voice Calls and Share Documents using Skype*

Make Voice Calls and Share Documents using Skype* Make Voice Calls and Share Documents using Skype* Intel Easy Steps 1 2012 Intel Corporation Using Skype for making Voice Calls and Sharing Documents In the previous activity Using Skype to Communicate

More information

ACS Version 10.6 - Check Layout Design

ACS Version 10.6 - Check Layout Design ACS Version 10.6 - Check Layout Design Table Of Contents 1. Check Designer... 1 About the Check Design Feature... 1 Selecting a Check Template... 2 Adding a Check Template... 2 Modify a Check Template...

More information

How To Create A View Frame In 3D

How To Create A View Frame In 3D 12/4/2008-10:00 am - 11:30 am Room:Palazzo O-P (5th) The Secrets of Cutting Plan and Profile Sheets in AutoCAD Civil 3D Michelle Rasmussen - Application Engineer, IMAGINiT Technologies CV304-1P In this

More information

Protocol for Microscope Calibration

Protocol for Microscope Calibration Protocol for Microscope Calibration A properly calibrated system is essential for successful and efficient software use. The following are step by step instructions on how to calibrate the hardware using

More information

Microsoft Word defaults to left justified (aligned) paragraphs. This means that new lines automatically line up with the left margin.

Microsoft Word defaults to left justified (aligned) paragraphs. This means that new lines automatically line up with the left margin. Microsoft Word Part 2 Office 2007 Microsoft Word 2007 Part 2 Alignment Microsoft Word defaults to left justified (aligned) paragraphs. This means that new lines automatically line up with the left margin.

More information

Sample Table. Columns. Column 1 Column 2 Column 3 Row 1 Cell 1 Cell 2 Cell 3 Row 2 Cell 4 Cell 5 Cell 6 Row 3 Cell 7 Cell 8 Cell 9.

Sample Table. Columns. Column 1 Column 2 Column 3 Row 1 Cell 1 Cell 2 Cell 3 Row 2 Cell 4 Cell 5 Cell 6 Row 3 Cell 7 Cell 8 Cell 9. Working with Tables in Microsoft Word The purpose of this document is to lead you through the steps of creating, editing and deleting tables and parts of tables. This document follows a tutorial format

More information

2013 Getting Started Guide

2013 Getting Started Guide 2013 Getting Started Guide The contents of this guide and accompanying exercises were originally created by Nemetschek Vectorworks, Inc. Vectorworks Fundamentals Getting Started Guide Created using: Vectorworks

More information

Kitchen and Bath Design Tutorial

Kitchen and Bath Design Tutorial Adding Cabinets Kitchen and Bath Design Tutorial This tutorial continues where the Interior Design Tutorial left off. You should save this tutorial using a new name to archive your previous work. The tools

More information

If you know exactly how you want your business forms to look and don t mind

If you know exactly how you want your business forms to look and don t mind appendix e Advanced Form Customization If you know exactly how you want your business forms to look and don t mind detail work, you can configure QuickBooks forms however you want. With QuickBooks Layout

More information

Getting Started Guide

Getting Started Guide 3D Architect Home Designer Getting Started Guide Produced and published in the UK by Eleco Software Limited 2014 Eleco plc. All rights reserved. The software and hardware names and labels used in this

More information

Kitchen and Bath Design Tutorial

Kitchen and Bath Design Tutorial Chapter 5: Kitchen and Bath Design Tutorial This tutorial continues where the Materials Tutorial left off. You should save this tutorial using a new name to archive your previous work. The tools and techniques

More information

Click on various options: Publications by Wizard Publications by Design Blank Publication

Click on various options: Publications by Wizard Publications by Design Blank Publication Click on various options: Publications by Wizard Publications by Design Blank Publication Select the Blank Publications Tab: Choose a blank full page Click on Create New Page Insert > Page Select the number

More information

CREATING EXCEL PIVOT TABLES AND PIVOT CHARTS FOR LIBRARY QUESTIONNAIRE RESULTS

CREATING EXCEL PIVOT TABLES AND PIVOT CHARTS FOR LIBRARY QUESTIONNAIRE RESULTS CREATING EXCEL PIVOT TABLES AND PIVOT CHARTS FOR LIBRARY QUESTIONNAIRE RESULTS An Excel Pivot Table is an interactive table that summarizes large amounts of data. It allows the user to view and manipulate

More information

Torchmate CAD User s Guide

Torchmate CAD User s Guide Torchmate CAD User s Guide Revised May 2011 Table of Contents: Overview of the Manual Installation and Setup Important Configuration Changes Overview of Menus Navigation and Selection Methods Basic CAD

More information

Exploring Geometric Transformations in a Dynamic Environment Cheryll E. Crowe, Ph.D. Eastern Kentucky University

Exploring Geometric Transformations in a Dynamic Environment Cheryll E. Crowe, Ph.D. Eastern Kentucky University Exploring Geometric Transformations in a Dynamic Environment Cheryll E. Crowe, Ph.D. Eastern Kentucky University Overview The GeoGebra documents allow exploration of four geometric transformations taught

More information

Tip of the Week: Creating Geometry from AutoCAD Drawings

Tip of the Week: Creating Geometry from AutoCAD Drawings PTC Email Newsletter March 4, 2002 PTC Product Focus: Assembly Performance Extension (APX) Tip of the Week: Creating Geometry from AutoCAD Drawings Training: Upcoming Training Classes PTC Product Focus:

More information

PowerPoint: Graphics and SmartArt

PowerPoint: Graphics and SmartArt PowerPoint: Graphics and SmartArt Contents Inserting Objects... 2 Picture from File... 2 Clip Art... 2 Shapes... 3 SmartArt... 3 WordArt... 3 Formatting Objects... 4 Move a picture, shape, text box, or

More information

Building Information Modeling with Autodesk Revit Building. Student Workbook

Building Information Modeling with Autodesk Revit Building. Student Workbook Building Information Modeling with Autodesk Revit Building Student Workbook Contents Introduction 4 Unit 1 7 Theory: CAD Versus BIM... 7 Autodesk Revit Building: Introduction, Interface, and Sketching...

More information

Introduction to the TI-Nspire CX

Introduction to the TI-Nspire CX Introduction to the TI-Nspire CX Activity Overview: In this activity, you will become familiar with the layout of the TI-Nspire CX. Step 1: Locate the Touchpad. The Touchpad is used to navigate the cursor

More information

Practical Work DELMIA V5 R20 Lecture 1. D. Chablat / S. Caro Damien.Chablat@irccyn.ec-nantes.fr Stephane.Caro@irccyn.ec-nantes.fr

Practical Work DELMIA V5 R20 Lecture 1. D. Chablat / S. Caro Damien.Chablat@irccyn.ec-nantes.fr Stephane.Caro@irccyn.ec-nantes.fr Practical Work DELMIA V5 R20 Lecture 1 D. Chablat / S. Caro Damien.Chablat@irccyn.ec-nantes.fr Stephane.Caro@irccyn.ec-nantes.fr Native languages Definition of the language for the user interface English,

More information

LIGO Laboratory / LIGO Scientific Collaboration

LIGO Laboratory / LIGO Scientific Collaboration LASER INTERFEROMETER GRAVITATIONAL WAVE OBSERVATORY LIGO Laboratory / LIGO Scientific Collaboration LIGO-T030143-02 ADVANCED LIGO August 5 th 2003 DESIGNING IN SOLIDWORKS Customised Tools for Design and

More information