Tax Exemption Processing for Italy

Transcription

1 ERP CLOUD Tax Exemption Processing for Italy Fusion Financials for EMEA TABLE OF CONTENTS Purpose of the document... 2 Assumptions and Prerequisites... 4 Feature Specific Setup... 5 Defining Letter of Intent Limits (VAT Plafond)... 5 Adjusting a Letter of Intent Limit (VAT Plafond)... 6 Tax Reporting Types and Codes... 7 Party Tax Profile Tax Exemption... 8 Letter of Intent Sent to Suppliers (Example)... 9 Letter of Intent Received from Customers (Example) Record Letters of Intent against Invoices in Fusion Payables Record Letters of Intent against Transactions in Fusion Receivables Reporting Exemption Letter Report for Italy Exemption Letter Report for Italy Parameters Exemption Letter Report for Italy Report Output Supplier Exemption Limit Consumption Report for Italy Supplier Exemption Limit Consumption Report Parameters Supplier Exemption Limit Consumption Report Output Subledger Letter of Intent Register Subledger Letter of Intent Register Report Parameters Subledger Letter of Intent Register Report Output Letter of Intent Receivables Invoice Register Letter of Intent Receivables Invoice Register Parameters Letter of Intent Receivables Invoice Register Report Output Appendix... 22

2 PURPOSE OF THE DOCUMENT This document explains the implementation and usage guidelines for the following : Defining Letter of Intent Limits (VAT Plafond) Recording Letters of Intent that are o Sent to suppliers o Received from customers Reporting o Exemption Letter Report for Italy o Supplier Exemption Limit Consumption Report for Italy o Subledger Letter of Intent Register for Italy o Letter of Intent Receivables Invoice Register In Italy, once you agree on the VAT exempt amount with the tax authority, you record this amount as the Letter of Intent limit. You can create and print Letters of Intent to send to your suppliers, requesting them to not charge VAT on invoices. Similarly, you will also receive Letters of Intent from your customers, which you will record. When you create purchase and sales invoices, you associate the Letter of Intent number with the invoice. The Italian payables exemption process is for the VAT Plafond requirements for the regular exporter s transaction cycle. The VAT Plafond amount is the VAT non-taxable amount that a regular exporter may claim to its suppliers when they buy or imports goods or services. A regular exporter has exported sales that exceed 10% of the total annual sales. The regular exporter can circumvent the purchasing and importing goods and services without VAT. This exemption process is now considered the Letter of Intent process. Once the VAT Plafond amount is calculated, the regular exporter allocates that amount to domestic suppliers and customers for one the three following types: 1. A specific operation with the description of the operation - Print for a specific operations specified in exemption letter UI. 2. Several operations up to a predefined amount - Print for operations performed in the given year and up to the amount specified in the Exemption Letter user interface. 3. All operations in a predefined date range within the same calendar year - Print for operations performed in the given year from date to date (date specified in the exemption letter UI). Use the Supplier Exemption Limit Consumption Report for Italy to monitor the supplier consumption of the Letter of Intent amount throughout the calendar year. You can print the Subledger Letter of Intent Register for Italy and the Letter of Intent Receivables Invoice Register.

3 The flow can be summarised as follows : The Letters of Intent feature is fully integrated with Oracle Fusion Tax.

4 ASSUMPTIONS AND PREREQUISITES In this document, the following entities are assumed to have already been setup : Data Security Geographies Enterprise Structure Tax Regime to Rate setup Tax Party Profiles Tax Rules Suppliers Customers Procurement Business Function Common Options for Payables and Receivables Manually add the Manage Letter of Intent Limits for Italy task to your implementation project: Edit your implementation project Select and Add Search the Task : Manage Letter of Intent Limits for Italy Apply the change Press Done It is recommended that the Implementation Project is complete for your organization before commencing the Feature Specific Setup outlined below. If you require further details, refer to the Appendix.

5 FEATURE SPECIFIC SETUP DEFINING LETTER OF INTENT LIMITS (VAT PLAFOND) The exemption limit is the total VAT exemption amount that a regular exporter can claim to its suppliers. For each year, the initial exemption limit is the sum of all reported export invoices of the previous year. There are two types of VAT Plafond: 1. Annual Plafond The VAT Plafond is manually calculated at the beginning of the year. The calculation is based on the operations of the previous year. 2. Monthly Plafond The VAT Plafond is manually calculated at the beginning of each month. The calculation is based on operations in the previous 12 months. Presently, this method is more frequently used by regular exporters. It allows for the increase of exports progressively as it is calculated monthly. Task name: Manage Letter of Intent Limits for Italy Navigation : Navigator > Setup and Maintenance -> Manage Letter of Intent Limits for Italy Define the VAT Plafond for a Legal Entity and Calendar Year. Specify the annual Letter of Intent limit, which the Fusion application automatically apportions equally over twelve calendar months. Alternatively, specify a monthly limit amount if you wish to setup different limits for each month.

6 ADJUSTING A LETTER OF INTENT LIMIT (VAT PLAFOND) Task name: Manage Letter of Intent Limits for Italy Navigation : Navigator > Setup and Maintenance -> Manage Letter of Intent Limits for Italy Adjust the Exemption Limits throughout the calendar year in case the VAT Plafond amount must be rectified. Search for the Legal Entity, Limit Type and Calendar Year Select the Period for which you wish to adjust the limit. Edit the limit to adjust the value Save and Close

7 TAX REPORTING TYPES AND CODES Task name : Manage Tax Reporting Types Navigation : Navigator > Setup and Maintenance -> Manage Tax Reporting Types Setup Tax Reporting Codes to group your transactions for reporting purposes. In this example, a tax reporting code is setup for the Letter of Intent. This allows you to run the reports by Tax Reporting Code. Setup the Letter of Intent reporting type and code and associate it with tax exemptions (letter of intent) and tax rates. If a transaction is flagged with Letter of Intent reporting type code, it will be selected for reporting. Enable the Reporting Type Use for Tax exemptions as shown below. Assign the Tax Reporting Code to the tax rate(s) that relate to your transactions. This is required since the reports will only retrieve the transactions that have the tax reporting code assigned.

8 PARTY TAX PROFILE TAX EXEMPTION The Letter of Intent (Lettera di Intento) is the official letter that regular exporters must send to suppliers and customs. The letter contains the instruction to invoice without VAT or contains the revocation/suspension of a previous Letter of Intent together with instructions to invoice with VAT. The Letter of Intent is valid only for the calendar year. It is possible to register more than one letter of intent within the calendar year for the same third party. Letters of Intent are maintained as party tax profile exemptions. Customers and suppliers can be eligible for tax exemption. To define the exemptions: Task name : Manage Party Tax Profiles Navigation : Navigator > Setup and Maintenance -> Manage Party Tax Profiles Search for the Third-Party Tax Profile for your Party Name Edit the Party Name Select Tax Exemptions tab Create a Tax Exemption Define the Letter of Intent as a Third-Party Tax Profile Tax Exemption. The Letter of Intent can be defined for customers and suppliers. Create Tax Exemption Region Enter the Party Type of Supplier or Customer Enable the Letter of Intent checkbox. This indicates the VAT exemption limit is applicable to a supplier or customer. Enter the Start Date and End Date for your Letter of Intent to indicate letter validity Enter the Recording Date to represent the date when the letter of intent is created for a supplier, or registered for a customer in Fusion Tax. The Certificate Number represents the internal chronological number consisting of the year and a progressive number generated sequentially. It is automatically generated when the exemption is saved and cannot be updated. If the Party Type = Supplier, the Certificate Number is not available. It is only available if the Party Type = Customer. The Protocol Number is generated for internal use and is applicable when the Party Type = Supplier. Protocol Number is an internal chronological number consisting of the year and a progressive number generated sequentially. It is automatically generated when the exemption is saved and may not be updated. The Letter Date is automatically updated with the system date when the letter created for a supplier is printed. It is printed on the Italian Supplier Exemption Limit Consumption Report and the Subledger Letter of Intent Register Enter the Tax Reporting Type and Tax Reporting Code for the letter of intent that you previously setup. These are also used as report parameters and the Tax Reporting Code is then associated to the transactions. Exemption Details Region Enter the Exemption Status. It can be Primary, Discontinued, or Rejected. o Suspended letters should be Discontinued o Revoked letters should be Rejected o Active letters should be Primary

9 Enter the Suspension or Revocation From Date when you suspend or revoke an exemption. Suspended letters can be re-activated at a later date, whereas Revoked letters are end dated and cannot be reversed. If the status is set to Suspended, then enter the Suspension To Date to record the period of time the letter is suspended. Use the Exempt Reason to indicate the correct reason for the Letter of Intent. Available values are: o Exempted amount o Exempted period, which does not allow overlapping dates. o Specific Operation, which automatically checks the Address to customs office check box Enter the supplier or customer Exemption Amount that is printed on the Letter of Intent. Enter the Clause which indicates which act is cited on the Letter of Intent. Valid values are: o art.8 (Export Sales) o art.8 bis (Transactions treated as Export Sales) o art.8 lett.c (Indirect Exports) o art.9. (International services or related to international trade) Enable the Prepare Letter of Intent checkbox to direct the application to create a printed copy of the letter for mailing. Enable the Letter of Intent ready to print checkbox to generate and print a letter or a reprint of a letter. When you need to send a copy of the Exemption Letter to the Italian Customs Office, set the Exempt Reason to Specific Operation. The Specific Operation indicates that letters are to be sent to the Customs Office, instead of the supplier. Letter of Intent Sent to Suppliers (Example)

10 Letter of Intent Received from Customers (Example)

11 RECORD LETTERS OF INTENT AGAINST INVOICES IN FUSION PAYABLES Enter the invoices in Fusion Payables that relate to your suppliers to whom you have sent a Letter of Intent. Assign the tax code that has the Letter of Intent reporting type code associated. The transaction should have the tax status code associated with the tax exemption. Ensure that the Tax Exemption details apply to the transaction and enter the Tax Exemption Certificate Number on the invoice tax lines user interface. Invoices entered in Fusion Payables that relate to suppliers where you have sent a Letter of Intent will be displayed in the Supplier Exemption Limit Consumption Report. Validate and account all invoices you require to appear in the Supplier Exemption Limit Consumption Report.

12 RECORD LETTERS OF INTENT AGAINST TRANSACTIONS IN FUSION RECEIVABLES Enter the transactions in Fusion Receivables that belong to your customers who have sent you a Letter of Intent. Ensure that the Tax Exemption details apply to the transaction and verify the certificate number and reason in the invoice lines user interface. Transactions entered in Fusion Receivables that belong to customers where you have received a Letter of Intent will be displayed in the Letter of Intent Receivables Invoice Register Report and Subledger Letter of Intent Register.

13 Complete, accounted and post all transactions you require to appear in the Letter of Intent Receivables Invoice Register Report and Subledger Letter of Intent Register. REPORTING You should print the following reports for auditing purposes. EXEMPTION LETTER REPORT FOR ITALY Navigation : Navigator > Tools -> Scheduled Processes The Exemption Letter Report for Italy produces an exemption letter for each supplier, instructing them not to include VAT on invoices that they submit. Use the Exemption Letter Report for Italy to create and print the Letters of Intent. Only letters which have Letter of Intent ready to print selected, are generated and printed. To Reprint a letter of intent, enable the Letter of Intent ready to print checkbox in the Exemption Details of the Manage Party Tax Profiles user interface. Exemption Letter Report for Italy Parameters All parameters are mandatory. Exemption Letter Report for Italy Report Output The report output displays a Report Parameters cover page, followed by each Letter of Intent.

14 Example Report Output showing the Letter of Intent, ready for signing:

15

16 SUPPLIER EXEMPTION LIMIT CONSUMPTION REPORT FOR ITALY Navigation : Navigator > Tools -> Scheduled Processes The Supplier Exemption Limit Consumption Report for Italy lists details about Italian suppliers and their consumption of the Letter of Intent amount that is assigned to them. The report will group by supplier, showing the invoice and Letter of Intent details. You can monitor the consumption of the Letter of Intent amounts to make sure you do not exceed the agreed limit. Supplier Exemption Limit Consumption Report Parameters The mandatory parameters are : Reporting Identifier Calendar Year Tax Reporting Type Tax Reporting Code Invoices with Letter of Intent

17 Supplier Exemption Limit Consumption Report Output The report output displays a Report Parameters cover page, followed by details of each supplier showing the monthly consumption. The report details will also show the consumed amount during the period and the letter of intent limit amount still available at the end of the period. The Supplier Consumption Amount and invoice details will be printed for each supplier. There is a report total Letter of Intent Amount Consumed During the Period, that represents the total consumed for the whole period for all suppliers.

18 SUBLEDGER LETTER OF INTENT REGISTER Navigation : Navigator > Tools -> Scheduled Processes The Subledger Letter of Intent Register lists all Italian exemption letters issued within a given period range. Choose to list either the Letters of Intent you received from your customers, or the Letters of Intent you sent to your suppliers. The report lists all the letters with details as in the screenshot below. Select Source = Receivables to list letters of intent received from customers. Select Source = Payables to list letters of intent sent to suppliers. Subledger Letter of Intent Register Report Parameters All parameters are mandatory.

19 Subledger Letter of Intent Register Report Output The report output displays a Report Parameters cover page, followed by details of exemption letters issued during the period range. The details of the Letters of Intent for the period are then shown for each customer :

20 LETTER OF INTENT RECEIVABLES INVOICE REGISTER Navigation : Navigator > Tools -> Scheduled Processes The Letter of Intent Receivables Invoice Register lists details about Receivables transactions issued with a Letter of Intent for a given calendar year. It also prints information about the customer who sent the letter. Letter of Intent Receivables Invoice Register Parameters Reporting Identifier and Calendar Year are mandatory. All other parameters are optional.

21 Letter of Intent Receivables Invoice Register Report Output The report output displays a Report Parameters cover page, followed by details of the Fusion Receivables transactions issued with a Letter of Intent. Example of two invoices with Letters of Intent, including the customer information:

22 APPENDIX Here are some useful information sources to assist with the implementation : Oracle Enterprise Repository (Financial Report Listing) The OER provides content relating to the report parameters and sample report output. Log in as guest from OER first. Oracle Financials Cloud Release 9 (Get Started) The web site contains links to subscriptions, understanding Oracle Financials Cloud and Implementation advice. Oracle Fusion Financials Cloud Release 9 What s New This document contains additional information relating to this feature and other Fusion Financials features and capabilities Enterprise Resource Planning Release Readiness for Financials Release 9 The web site contains links to spotlights, release content documents, product documentation and training Captivate Recording (link to be added at a later date when we have a recording) Copyright 2014, Oracle and/or its affiliates. All rights reserved. This document is provided for information purposes only, and the contents hereof are subject to change without notice. This document is not warranted to be error-free, nor subject to any other warranties or conditions, whether expressed orally or implied in law, including implied warranties and conditions of merchantability or fitness for a particular purpose. We specifically disclaim any liability with respect to this document, and no contractual obligations are formed either directly or indirectly by this document. This document may not be reproduced or transmitted in any form or by any means, electronic or mechanical, for any purpose, without our prior written permission. Oracle and Java are registered trademarks of Oracle and/or its affiliates. Other names may be trademarks of their respective owners. Intel and Intel Xeon are trademarks or registered trademarks of Intel Corporation. All SPARC trademarks are used under license and are trademarks or registered trademarks of SPARC International, Inc. AMD, Opteron, the AMD logo, and the AMD Opteron logo are trademarks or registered trademarks of Advanced Micro Devices. UNIX is a registered trademark of The Open Group. 0114