Premium Commercial Coatings Factory Pack Colors PCC501 White, PCC502 Black, PCC503 Light Gray, PCC504 Gun Metal Gray
|
|
- Madlyn Ray
- 7 years ago
- Views:
Transcription
1 Premium Commercial Coatings Factory Pack Colors PCC501 White, PCC502 Black, PCC503 Light Gray, PCC504 Gun Metal Gray PRODUCT DATA SHEET PRODUCT DESCRIPTION PCC Premium Commercial Coatings Direct-To-Metal(DTM) is a low VOC Acrylic Polyurethane that offers direct-to-metal adhesion. The PCC DTM line offers 4 factory packaged colors that are durable, high gloss, chemical resistant, and offer direct-to-metal adhesion. This product line is ideal for industrial applications, machinery, and equipment. Metal Direct Acrylic Polyurethane offers excellent hiding and is free of lead and chromate hazards. SUITABLE SUBSTRATES Blasted Cold Rolled Steel FRP (Fiberglass Reinforced Plastic) Blasted Hot Rolled Steel SMC (Sheet Molded Compound) Note: Not for use on immersion services. Not for use on surfaces with extended surface temperature of 250 F or more. SURFACE PREPARATION Bare Metal Substrates: 1. Wash surface with a mild detergent in hot water. Rinse well and wipe dry with a clean cloth. 2. Solvent clean with an appropriate Martin Senour Surface Cleaner and wipe dry with a clean cloth 3. Blast all metal areas(preferred) or sand with 80 grit sand paper. Sanding is recommended for SMC and FRP. 4. Solvent clean with an appropriate Martin Senour Surface Cleaner and wipe dry with a clean cloth The Martin Senour Company Page 1 of 5 MA5298
2 MIXING RATIO Stir or shake PCC Acrylic Polyurethane thoroughly before mixing. Mix by volume, 5 parts PCC Acrylic Polyurethane Color with 1 part PIH25 hardener and stir thoroughly. Up to 10% of PCC reducer PCR20 may be added based on sprayable volume to customize application properties without affecting VOC. + Note: When using HVLP equipment only, add up to 1 part PCR10 Reducer POT LIFE 5 Parts Color 1 Part Hardener PIH25 Time Temperature 2 Hours 75 F APPLICATION OVERALL HVLP: Adjust air pressure at cap to 8-10 psi for pressure feed applications with a fluid delivery of ounces per minute. Apply 1 full wet coat with 50% overlap, then apply a second coat in a cross-coat method. Recommended film build is 4-8 mils. Airless: Airless Delivery pressure between 2,500 3,500 psi. Pump up to 3,000 lbs fluid pressure. 1 full wet coat with 50% overlap, applying the second coat in a cross-coat method at an application distance of inches. Recommended film build is 4-8 mils. Check the spray gun pattern before painting. Clean spray gun immediately after use with compliant Gun and Equipment Cleaner. NOTE: Estimated coverage is 882 sq. ft per gallon per mil. EQUIPMENT Airless Recommended Fluid Pressure psi Reversible Tip 3-13, Pump Up to 3,000 lbs fluid pressure Filter None Note: Hose needs to meet or exceed a rating of 6,000 psi. Gun Type Tip Size Air Pressure HVLP Pressure Feed 1.3 or 1.4mm at oz/min 8-10 psi at cap (use manufacturers recommendation) 2013 The Martin Senour Company Page 2 of 5 MA5298
3 THEORETICAL COVERAGE Square mil Dry DRYING SCHEDULE Air Dry: Air dry times at 8.0 mil wet at 70 F, 50% Relative Humidity. Air Dry Hand Slick 45 minutes Dust Free 1 hour Tack Free 1.5 hours Tape Free 2 hours Nib-Sandable 2 hours Sandable 4 hours Force Dry: Decals: 30 minutes at 180º F 72 hours RECOAT Minimum recoat time: 20 minutes Maximum recoat time: 72 hours Surface must be sanded with grit sand paper to recoat after 72 hours PERSONAL PROTECTION Read label, directions, and MSDS before use Refer to MSDS for specific information Wear a NIOSH approved organic vapor respirator when mixing and applying Wear a NIOSH dust particulate mask when sanding Wear safety goggles, coveralls, and chemical protective gloves when using this product 2013 The Martin Senour Company Page 3 of 5 MA5298
4 REGULATORY DATA Mixing Ratio by Volume 5:1 Physical Properties Max VOC 2.49 Impact 80/60 Ready to Spray Volume Solids (White) 55% Humidity Pass 1 mil dry (white) 882 sq ft per gal per mill Salt Spray (500 hrs) Pass Pot Life 2 Hours Dry Adhesion Pass Viscosity (sprayable) #3 Zahn Cup (ISO calibrated) seconds MEK R 50 Recommended Dry Film Thickness 4-8 mils Gloss 80 to 90 Note: Please contact your PCC product representative for higher film build recommendations. PCC Direct-To-Metal As Packaged As Applied Lb/Gal G/L Lb/Gal G/L Density % by Wt. % by Vol. % by Wt. % by Vol. Volatiles Water Exempt Compounds Lb/Gal G/L Lb/Gal G/L VOC Total VOC Less Exempt Lb/Gal KG/L Lb/Gal KG/L HAPs LABEL CAUTIONS Color: PCC501, PCC502, PCC503, PCC504 DANGER! HARMFUL OR FATAL IF SWALLOWED. EXTREMELY FLAMMABLE - VAPORS MAY CAUSE FLASH FIRES! HARMFUL IF INHALED - MAY AFFECT THE BRAIN OR NERVOUS SYSTEM, CAUSING DIZZINESS, HEADACHE OR NAUSEA. IRRITATES EYES, SKIN AND RESPIRATORY TRACT. CAN BE ABSORBED THROUGH THE SKIN. MAY CAUSE BLOOD DAMAGE. Contents are EXTREMELY FLAMMABLE. Keep away from heat, sparks, and open flame. Vapors will accumulate readily and may ignite explosively. During use and until all vapors are gone: Keep area ventilated - Do not smoke - Extinguish all flames, pilot lights and heaters Turn off stoves, electric tools and appliances, and any other sources of ignition. VAPOR HARMFUL. Use only with adequate ventilation. This product must be used with an appropriate catalyst. Follow the respirator requirement and instructions on the catalyst. Avoid contact with eyes and skin. Wear butyl rubber gloves. Wash hands after using. Keep container closed when not in use. Do not transfer contents to other containers for storage. FIRST AID: If INHALED: If affected, remove from exposure. Restore breathing, Keep warm and quiet. If on SKIN: Wash affected area thoroughly with soap and water. Remove contaminated clothing. Launder before re-use. If in EYES: Flush eyes with large amounts of water for 15 minutes. Get medical attention. If SWALLOWED: Call Poison Control Center, hospital emergency room, or physician immediately. DELAYED EFFECTS FROM LONG TERM OVEREXPOSURE. Contains solvents which can cause permanent brain and nervous system damage. Intentional misuse by deliberately concentrating and inhaling the contents can be harmful or fatal. Contains 2,4-Pentanedione which may affect immune and blood producing systems. This product must be mixed with other components before use. Before opening the packages, READ AND FOLLOW WARNING LABELS ON ALL COMPONENTS. WARNING: This product contains chemicals known to the State of California to cause cancer and birth defects or other reproductive harm. DO NOT TAKE INTERNALLY. KEEP OUT OF THE REACH OF CHILDREN. Do not apply on toys and other children's articles or furniture. FOR PROFESSIONAL USE ONLY. SEE MATERIAL SAFETY DATA SHEET. DANGER: Rags, steel wool, other waste soaked with this product, and sanding residue may spontaneously catch fire if improperly discarded. Immediately place rags, steel wool, other waste soaked with this product, and sanding residue in a sealed, water-filled, metal container. Dispose of in accordance with local fire regulations The Martin Senour Company Page 4 of 5 MA5298
5 LABEL CAUTIONS continued Hardener: PIH25 DANGER! HARMFUL OR FATAL IF SWALLOWED. COMBUSTIBLE! VAPOR AND SPRAY MIST HARMFUL, OVEREXPOSURE MAY CAUSE LUNG DAMAGE. MAY CAUSE ALLERGIC RESPIRATORY AND SKIN REACTION, EFFECTS MAY BE PERMANENT. CAUSES EYE IRRITATION. HARMFUL IF INHALED - MAY AFFECT THE BRAIN OR NERVOUS SYSTEM, CAUSING DIZZINESS, HEADACHE OR NAUSEA. Contents are COMBUSTIBLE. Keep away from heat and open flame. VAPOR AND SPRAY MIST HARMFUL. Gives off harmful vapor of solvents and isocyanates. DO NOT USE IF YOU HAVE CHRONIC (LONGTERM) LUNG OR BREATHING PROBLEMS, OR IF YOU HAVE EVER HAD A REACTION TO ISOCYANATES. USE ONLY WITH ADEQUATE VENTILATION. WHERE OVERSPRAY IS PRESENT, A POSITIVE PRESSURE AIR SUPPLIED RESPIRATOR (NIOSH approved) SHOULD BE WORN TO PREVENT EXPOSURE. IF UNAVAILABLE, AN APPROPRIATE PROPERLY FITTED APPROVED NIOSH VAPOR/PARTICULATE RESPIRATOR MAY BE EFFECTIVE. Follow directions for respirator use. Wear the respirator for the whole time of spraying and until all vapors and mists are gone. If you have any breathing problems during use, LEAVE THE AREA and get fresh air. If problems remain or happen later, IMMEDIATELY call a doctor - If not available get emergency medical treatment. Have this label with you. IRRITATES SKIN AND EYES. Avoid contact with eyes and skin. In case of eye contact, flush immediately with plenty of water for 15 minutes and call a doctor - If not available get emergency medical treatment. In case of skin contact, wash thoroughly with soap and water. Clothes contaminated by a spill should be removed and laundered. Keep container closed when not in use. Reacts with water in closed container to produce pressure which may cause container to burst. Do not transfer contents to other containers for storage. FIRST AID: If INHALED: If affected, remove from exposure. Restore breathing, Keep warm and quiet. If on SKIN: Wash affected area thoroughly with soap and water. Remove contaminated clothing. Launder before re-use. If in EYES: Flush eyes with large amounts of water for 15 minutes. Get medical attention. If SWALLOWED: Call Poison Control Center, hospital emergency room, or physician immediately. DELAYED EFFECTS FROM LONG TERM OVEREXPOSURE. Contains solvents which can cause permanent brain and nervous system damage. Intentional misuse by deliberately concentrating and inhaling the contents can be harmful or fatal. This product must be mixed with other components before use. Before opening the packages, READ AND FOLLOW WARNING LABELS ON ALL COMPONENTS. DO NOT TAKE INTERNALLY. KEEP OUT OF THE REACH OF CHILDREN. FOR PROFESSIONAL USE ONLY. SEE MATERIAL SAFETY DATA SHEET. Reducer: PCR10 DANGER! EXTREMELY FLAMMABLE - VAPORS MAY CAUSE FLASH FIRES! HARMFUL IF INHALED - MAY AFFECT THE BRAIN OR NERVOUS SYSTEM, CAUSING DIZZINESS, HEADACHE OR NAUSEA. IRRITATES EYES, SKIN AND RESPIRATORY TRACT. Contents are EXTREMELY FLAMMABLE. Keep away from heat, sparks, and open flame. Vapors will accumulate readily and may ignite explosively. During use and until all vapors are gone: Keep area ventilated - Do not smoke - Extinguish all flames, pilot lights and heaters Turn off stoves, electric tools and appliances, and any other sources of ignition. VAPOR HARMFUL. Use only with adequate ventilation. Wear an appropriate properly fitted vapor/particulate respirator (NIOSH approved) during and after application. Follow respirator manufacturer's directions for respirator use. Avoid contact with eyes and skin. Wash hands after using. Keep container closed when not in use. Do not transfer contents to other containers for storage. FIRST AID: If INHALED: If affected, remove from exposure. Restore breathing, Keep warm and quiet. If on SKIN: Wash affected area thoroughly with soap and water. Remove contaminated clothing. Launder before re-use. If in EYES: Flush eyes with large amounts of water for 15 minutes. Get medical attention. If SWALLOWED: Call Poison Control Center, hospital emergency room, or physician immediately. DELAYED EFFECTS FROM LONG TERM OVEREXPOSURE. Contains solvents which can cause permanent brain and nervous system damage. Intentional misuse by deliberately concentrating and inhaling the contents can be harmful or fatal. WARNING: This product contains chemicals known to the State of California to cause cancer and birth defects or other reproductive harm. DO NOT TAKE INTERNALLY. KEEP OUT OF THE REACH OF CHILDREN. FOR PROFESSIONAL USE ONLY. SEE MATERIAL SAFETY DATA SHEET The Martin Senour Company Page 5 of 5 MA5298
PRISM Low VOC Single Stage Color Flat (76), Satin (77), Semi-Gloss (78), & Gloss (79)
PRISM Low VOC Single Stage Color Flat (76), Satin (77), Semi-Gloss (78), & Gloss (79) Product Data Sheet PRODUCT DESCRIPTION Prism Low VOC Single Stage Color is a two-component urethane coating. This premium
More informationSC2000 CEMENT BONDING PROCEDURES
Pg.1 SC2000 CEMENT BONDING PROCEDURES Widely recognized as the world s finest cold vulcanizing cement REMA SC2000 is the solution to your industrial bonding problems. By using REMA UTR20 hardener with
More informationTrade Name of this Product Isopropyl Rubbing Alcohol 91% USP. Corporate Compliance Team 1666 East Touhy Avenue
Page 1 of 5 MSDS Document Product 1. Chemical Product and Company Identification Trade Name of this Product Manufacturer Contact Name Lawson Products, Inc. Corporate Compliance Team 1666 East Touhy Avenue
More informationPage Number: 1 -----------------------------------------------------------------------------
Page Number: 1 SECTION I - PRODUCT AND COMPANY INFORMATION Product Name: POLYSEAMSEAL(R) ALL-PURPOSE ADHESIVE CAULK Hazard Rating: Health: 1 Fire: 0 Reactivity: 0 PPI: B Company Identification: OSI SEALANTS,
More information3.8 HSP (High Solids Polyurethane)
Description is a single-stage topcoat designed for commercial and automotive refinishing. This product provides Superior UV durability as well as commercial grade chemical resistance. 3.8 HSP has excellent
More informationTractor Painting Tips
Keeping your tractor or equipment well kept & free from rust & corrosion will extend the life of your investment & help retain its value for a longer period of time. It can be difficult, in many cases,
More informationHealth 2 R00699 Flammability 3 Reactivity 0 PRODUCT NAME RUST TOUGH Rust Preventive Enamel, Red Oxide Primer
R00699 02 00 MATERIAL SAFETY DATA SHEET Section 1 -- PRODUCT AND COMPANY IDENTIFICATION PRODUCT NUMBER HMIS CODES Health 2 R00699 Flammability 3 Reactivity 0 PRODUCT NAME RUST TOUGH Rust Preventive Enamel,
More informationUNILIC ACRYLIC EMULSION
UNILIC ACRYLIC EMULSION Updated on 18 Aug 2010 DESCRIPTION USES An acrylic emulsion paint with excellent resistance to algae and fungus growth. Complies with Singapore Standard (SS150-Type1:1998). Certified
More informationAcrylic Enamel Topcoat
Acrylic Enamel Topcoat ACRYL-GLO TECHNICAL DATA SHEET The ACRYL-GLO single-stage acrylic enamel paint system provides a durable finish that is easy to apply and suitable for both commercial and passenger
More informationMATERIAL SAFETY DATA SHEET R00699 02 00
R00699 02 00 MATERIAL SAFETY DATA SHEET Section 1 -- PRODUCT AND COMPANY IDENTIFICATION PRODUCT NUMBER DATE OF PREPARATION HMIS CODES Health 2 R00699 29-SEP-07 Flammability 3 Reactivity 0 PRODUCT NAME
More informationTECHNICAL DATA RS-6100. European Clear EZ. 5751 N. Webster Street Dayton, OH 45414-0802 Phone 937-890-6547 Toll Free 800-257-6547 Fax 937-890-6320
RS-6100 TECHNICAL DATA European Clear EZ DESCRIPTION: RS-6100 European Clear EZ is formulated with premium European resins. It is ideal for excellent color matching on white, light colors and metallics
More informationProduct Information. D8115 Matte and D8117 Semi-Gloss Clearcoat System
Product Information D8115 Matte and D8117 Semi-Gloss Clearcoat System Product Description D8115 Matte and D8117 Semi-Gloss Clearcoats are designed for use over Envirobase High Performance Waterborne, Global
More information=========================================================================== Section 1 PRODUCT AND COMPANY IDENTIFICATION
2101 01 00 MATERIAL SAFETY DATA SHEET Section 1 PRODUCT AND COMPANY IDENTIFICATION PRODUCT NUMBER HMIS CODES Health 2* 2101 Flammability 4 Reactivity 0 PRODUCT NAME KRYLON* Interior/Exterior Paint, Cherry
More informationDisposal: Place empty container in trash. Give partial or full container to safety officer.
Chemical Name: Indoor/Outdoor Helmsman Spar Urethane Manufacturer: Minwax Container size: 1qt. Location: VLA Disposal: Place empty container in trash. Give partial or full container to safety officer.
More informationDuPont ChromaOne Acrylic Urethane Single Stage
cdupont Automotive Finishes ChromaSystem Technical Manual Description ChromaOne is a productive acrylic urethane designed for spot, panel and overall repairs of OEM Single Stage finishes, both solids and
More informationMaterial Safety Data Sheet
Material Safety Data Sheet STAINLESS STEEL CLEANER & POLISH 1. Trade name of product Product use Code Date of issue Product and company identification Product dilution information STAINLESS STEEL CLEANER
More informationSwallowed Do not induce vomiting give 250 ml water to drink. Seek immediate medical attention.
Section 3- HAZARDS IDENTIFICATION R20/21 3.1 Hazardous substance dangerous goods 3.2 Risk Phrases R20/21 Harmful by inhalation in contact with skin. 3.3 Safety Phrases S16 Keep away from sources of ignition
More informationMATERIAL SAFETY DATA SHEET WWF -20 1 of 5 1 Gal Xtreme Blue -20 Windshield Washer Fluid. 121 Landmark Drive Greensboro, NC 27409
WWF -20 1 of 5 = SECTION I - COMPOSITION / INFORMATION ON MATERIALS = VAPOR PRESSURE WEIGHT REPORTABLE COMPONENTS CAS NUMBER mm Hg @ TEMP PERCENT -------------------------------------------------------------------------------------------
More informationMaterial Safety Data Sheet
Material Safety Data Sheet OASIS 259 GLASS FORCE 1. Product and company identification Trade name of product Product use Product dilution information : OASIS 259 GLASS FORCE : Glass Cleaner : Up to 12.5
More informationSOLVENT CLEANER MSDS Page 1 of 5 SAFETY DATA SHEET. (To comply with OSHA s Hazard Communication Standard 29CFR 1910.1200/ANSI z400.
SOLVENT CLEANER MSDS Page 1 of 5 SAFETY DATA SHEET (To comply with OSHA s Hazard Communication Standard 29CFR 1910.1200/ANSI z400.1-1993) 1. PRODUCT & COMPANY IDENTIFICATION Prepared on: Month, Year Manufactured
More informationPresented by: Rich Perry Marsh Risk Consulting
Flammable and Combustible Liquids Presented by: Rich Perry Marsh Risk Consulting What s the Big Deal? Flammable and combustible liquids are easily ignited Ignite with explosive force Burn readily and give
More informationMATERIAL SAFETY DATA SHEET
MATERIAL SAFETY DATA SHEET 1913 11 00 DATE OF PREPARATION Jun 8, 2009 SECTION 1 PRODUCT AND COMPANY IDENTIFICATION PRODUCT NUMBER 1913 PRODUCT NAME KRYLON Interior/Exterior Paint, Purple (Safety Purple)
More informationM A T E R I A L S A F E T Y D A T A S H E E T
Page: 1 1. CHEMICAL PRODUCT AND COMPANY IDENTIFICATION Product Name: SAVOGRAN COMPANY PO BOX 130 NORWOOD, MA 02062-0130 (781) 762-5400 2. COMPOSITION/INFORMATION ON INGREDIENTS Component/Exposure Limits
More informationPLAS-STICK 2330S PLASTIC ADHESION PROMOTER
PLAS-STICK 2330S PLASTIC ADHESION PROMOTER GENERAL DESCRIPTION A green-gray adhesion promoter designed to enhance the performance of products on unprimed polyolefin or non-polyolefin plastic parts. The
More informationMaterial Safety Data Sheet 1. PRODUCT AND COMPANY INDENTIFICATION
Material Safety Data Sheet 1. PRODUCT AND COMPANY INDENTIFICATION POWDER 365 - RAL COLOURS Revision date: 09/20/2010 Supplier Powder 365 82 Green Acres Circle Lavonia GA 30553 For non-emergency information
More informationWOODWORKS: BEGINNER PROJECT FISHING POLE RACK
WOODWORKS: BEGINNER PROJECT FISHING POLE RACK Storing fishing rods and reels can be quite difficult unless you have a special rack for them. Here s a simple, easy-to-build design for a rack that not only
More informationMaterial Safety Data Sheet
Date of Issue: 26/5/2009 MSDS No.: Q54-1300B Material Safety Data Sheet 1. PRODUCT AND COMPANY IDENTIFICATION Product Name : Daily Maintenance Kit(Wipe Cleaning) Product Code : IP6-108 -Application model
More informationCeramClean II Aluminum Safe
1. Identification of substance: MATERIAL SAFETY DATA SHEET DIVISION Reviewed on 07/01/2004 Product details: Trade name: CeramClean II Ink Cleaner Product Code: 332506 Manufacturer/Supplier: Harper Corporation
More informationDIAMOND POWDER - MICRON
SAFETY DATA SHEET REVISION: 08/28/2015 DIAMOND POWDER - MICRON 1. PRODUCT & COMPANY INFORMATION 1.1 PRODUCT IDENTIFIER(S) PRODUCT NAME: DIAMOND POWDER - MICRON MICRON 5 CARAT PART # 100 CARAT PART# MICRON
More informationGLADE AEROSOL SPRAY - LAVENDER & VANILLA
1. PRODUCT AND COMPANY IDENTIFICATION Product information Trade name : Use of the : Air Freshener Substance/Mixture Company : S.C. Johnson & Son, Inc. 1525 Howe Street Racine WI 53403-2236 Emergency telephone
More informationSIGMA-ALDRICH. Material Safety Data Sheet Version 4.0 Revision Date 02/27/2010 Print Date 08/25/2011
SIGMAALDRICH sigmaaldrich.com Material Safety Data Sheet Version 4.0 Revision Date 02/27/2010 Print Date 08/25/2011 1. PRODUCT AND COMPANY IDENTIFICATION Product name : Product Number : G7253 Brand : Sigma
More information10P20-44 High Solids Epoxy Primer
Technical Data Sheet Product Group High solids epoxy primer Characteristics Product Information A high solids urethane compatible, Skydrol resistant primer for the exterior of aircraft. It provides excellent
More informationMATERIAL SAFETY DATA SHEET
Page 1 of 5 SECTION I: PRODUCT INFORMATION REVISION DATE: February 1 st, 2015 USAGE: ONE COMPONENT URETHANE BASED SEALANT MANUFACTURER/SUPPLIER: SIKA CANADA INC. 601, avenue Delmar Pointe Claire, QC H9R
More informationContents. Introduction...3. Determine the Type of Floor Finishing Project...4. Things to Think About Before You Start...5. Assemble Materials...
Contents Introduction....................................3 Determine the Type of Floor Finishing Project...........4 Things to Think About Before You Start............5 Assemble Materials.............................6
More informationMaterial Safety Data Sheet
Material Safety Data Sheet Revision Number: 002.1 Issue date: 02/17/2011 1. PRODUCT AND COMPANY IDENTIFICATION Product type: Lubricant Item number: 51286 Region: United States Company address: Contact
More informationWINDEX MULTI-SURFACE CLEANER - VINEGAR
1. PRODUCT AND COMPANY IDENTIFICATION Product information Trade name : Use of the : Hard Surface Cleaner Substance/Mixture Company : S.C. Johnson and Son, Limited 1 Webster Street Brantford ON N3T 5R1
More informationMATERIAL SAFETY DATA SHEET
PRODUCT IDENTITY: EZ CLEAN PAGE: 1 OF 7 MATERIAL SAFETY DATA SHEET This Material Safety Data Sheet conforms to the requirements of ANSI Z400.1. THIS MSDS COMPLIES WITH 29 CFR 1910.1200 (HAZARD COMMUNICATION
More informationMATERIAL SAFETY DATA SHEET
Page 1 of 5 SECTION I: PRODUCT INFORMATION REVISION DATE: April 27 th, 2015 USAGE: SUPPLIER: SIKA CANADA INC. 601, avenue Delmar Pointe Claire, QC H9R 4A9 EMERGENCY TELEPHONE NUMBER: CANUTEC (collect)
More informationMaterial Safety Data Sheet
Material Safety Data Sheet MSDS Update: 05/17/2012 Version: 2.0 Date Printed: SECTION 1 - Chemical Product & Company Identification Product Name Fluorinert TM FC-70 Fluid Product Number HR2-797 Company
More informationApproved. Property Test/Standard Description. gloss (70-85) Flash point ISO 3679 Method 1 30 C calculated VOC-US/Hong Kong. US EPA method 24 (tested)
Approved 3140;3240;4320 1,2 3140 polyurethane ^(ValidationDate) 1 Product description This is a two component chemically curing aliphatic acrylic polyurethane coating. It has a glossy finish with very
More informationSAFETY DATA SHEET. according to 1907/2006/EC, Article 31 CYTOFIXX (CYTOLOGICAL FIXATIVE)
SAFETY DATA SHEET according to 197/26/EC, Article 31 Page 1/5 SECTION 1: Identification of the substance/mixture and of the company/undertaking 1.1. Product identifier Product name 1.3. Details of the
More informationCAS-No. EC-No. Index-No. Concentration Controlled Pore Glass - - - - May be harmful if inhaled. May cause respiratory tract irritation.
SIGMAALDRICH Material Safety Data Sheet Version 3.0 Revision Date 01/03/2009 Print Date 02/18/2009 1. PRODUCT AND COMPANY IDENTIFICATION Product name : Glass beads, acidwashed Product Number : G8772 Brand
More informationLITHIUM CARBONATE, 1% AQUEOUS
Material Safety Data Sheet LITHIUM CARBONATE, 1% AQUEOUS Section 1 - Chemical Product and Company Identification MSDS Name: Lithium Carbonate, 1% Aqueous Catalog Numbers: SO-721 Company Identification:
More informationCOMPOSITION / INFORMATION ON INGREDIENTS
MATERIAL SAFETY DATA SHEET DAMTITE WATERPROOFER- WHITE 01071, 01211, 01451 DAMTITE POWDER FOUNDATION WATERPROOFER GRAY 02451 SECTION I. COMPANY & PRODUCT INFORMATION Product Identification Manufacturer
More informationMATERIAL SAFETY DATA SHEET PAGE 1
1254 Chestnut Street Newton, MA 02464-1418 Tel: (617) 965-5511 Fax: (617) 965-5818 MATERIAL SAFETY DATA SHEET PAGE 1 SECTION 1. CHEMICAL IDENTIFICATION -- - CHEMICAL NAME: TRADE NAME: PRODUCT #: Organic
More informationMATERIAL SAFETY DATA SHEET TOILET BOWL SANITIZER
MATERIAL SAFETY DATA SHEET TOILET BOWL SANITIZER No. 1 Date Issued: 07/03/2011 COMPANY DETAILS NAME: Hygiene Systems (Pty) Ltd EMERGENCY TEL: 0860 494 4363 ADDRESS: 7 Hargan Road, TEL: 011 552 8403 SECTION
More informationProperty Test/Standard Description. semi gloss (35-70) Flash point ISO 3679 Method 1 34 C IED (2010/75/EU) (calculated)
408;21800;21820;21740;21760;21840 1,2 408 unsaturated vinyl ester ^(ValidationDate). 1 Product description This is a glass flake reinforced unsaturated vinyl ester coating. It is an ultra high build, extremely
More informationOFF! CLIP-ON MOSQUITO REPELLENT
1. PRODUCT AND COMPANY IDENTIFICATION Product information Trade name : Use of the : Insect Repellent Substance/Preparation Company : S.C. Johnson and Son, Limited 1 Webster Street Brantford ON N3T 5R1
More informationMSDS (Material Safety Data Sheet)
Titanium, Mineral & Chemicals Tel 82-2-2675-5700 Fax 82-2- 2675-0576 E-Mail : tmc@tmc.co.kr Homepage : http://tmc.co.kr/ MSDS (Material Safety Data Sheet) Titanium Dioxide (TiO2) Rutile Section 1 : Product
More informationSafety Data Sheet. Product #: 300178. Aspira Scientific 521 Cottonwood Dr. Milpitas, CA 95035 408.571.1100 techsupport@aspirasci.com www.aspirasci.
Safety Data Sheet Aspira Scientific 521 Cottonwood Dr. Milpitas, CA 95035 408.571.1100 techsupport@aspirasci.com www.aspirasci.com Section 1: Product Identification Product Identifiers Product Name: L-
More informationSAFETY DATA SHEET FILE NO.: 514122, 514123 DRY CIDER VINEGAR SDS DATE: 05/05/15
SECTION 1: PRODUCT AND COMPANY IDENTIFICATION PRODUCT NAME: Dry Cider Vinegar PRODUCT CODES: 514122, 514123 MANUFACTURED FOR: ADDRESS: Best Veterinary Solutions, Inc 1716 Detroit St., Ellsworth, IA 50075
More informationPLAS-STICK 2322S GENERAL MIXING. DESCRIPTION An adhesion COMPONENTS. MIX RATIO Ready to Spray. POT LIFE Indefinite. ADDITIVES Accelerator:
PLAS-STICK 2322S PLASTIC ADHES ION PROMOTER K GENERAL DESCRIPTION An adhesion promoter designed to enhances the performance of select products on unprimed polyolefin. MIXING COMPONENTS Plas-Stick 2322S
More informationMATERIAL SAFETY DATA SHEET Complies with ANSI Z400.1 Format SECTION 1: PRODUCT IDENTIFICATION
Staples the Office Superstore, LLC. MSDS 500 Staples Drive Hazard Rating HMIS NFPA Framingham, MA 01702 USA Health Business Phone: 1.800.322.0912 Flammability 24-HR MEDICAL AND DOT EMERGENCIES: 1.800.322.0912
More informationMATERIAL SAFETY DATA SHEET
Section I: IDENTIFICATION 1 OF 2 Date Prepared: 02/15/02 Date Revised*: 09/21/06 Product Name: Gram Stain, Lugol s Iodine Item Number: 400312, 400330, 400350, 400352, 400314, 400351, 400356, 400312B 400312A
More informationDate Printed: 08/29/2005 Date Updated: 03/07/2004 Version 1.4. CERIUM(III) NITRATE HEXAHYDRATE, 99.99% Product Number 392219
SIGMA-ALDRICH MATERIAL SAFETY DATA SHEET Date Printed: 08/29/2005 Date Updated: 03/07/2004 Version 1.4 Section 1 - Product and Company Information Product Name CERIUM(III) NITRATE HEXAHYDRATE, 99.99% Product
More informationDOW CORNING CORPORATION Material Safety Data Sheet
Page: 1 of 7 1. PRODUCT AND COMPANY IDENTIFICATION Dow Corning Corporation South Saginaw Road Midland, Michigan 48686 24 Hour Emergency Telephone: Customer Service: Product Disposal Information: CHEMTREC:
More informationMATERIAL SAFETY DATA SHEET
MATERIAL SAFETY DATA SHEET 03901 02 00 DATE OF PREPARATION Jul 15, 2016 SECTION 1 PRODUCT AND COMPANY IDENTIFICATION PRODUCT NUMBER 03901 PRODUCT NAME KRYLON Industrial QUIK-MARK Water-Based Inverted Marking
More informationDOW CORNING CORPORATION Material Safety Data Sheet
Page: 1 of 7 1. IDENTIFICATION OF THE SUBSTANCE AND OF THE COMPANY Dow Corning Corporation South Saginaw Road Midland, Michigan 48686 24 Hour Emergency Telephone: Customer Service: Product Disposal Information:
More informationMaterial Safety Data Sheet
1. Product And Company Identification Product Name: STP Diesel Fuel Treatment & Injector Cleaner (US only) Responsible Party: Information Phone Number: +1 203-205-2900 Emergency Phone Number: For Medical
More informationSECTION 1 - PRODUCT IDENTIFICATION
Product Identification Physical Data Hazardous Components Fire and Explosion Hazard Data Reactivity Data Health Hazard Information Spill or Leak Procedures Handling Information Special Protection Information
More informationSECTION I - MANUFACTURER IDENTIFICATION SECTION II - HAZARDOUS INGREDIENTS/SARA III INFORMATION OCCUPATIONAL EXPOSURE LIMITS OSHA PEL
MATERIAL SAFETY DATA SHEET PAGE 1 OF 4 PRODUCT NAME: (9981) LIQUID RUBBER WHITE PRODUCT CODE: F9981 HMIS CODES: H2 F2 R0 PG SECTION I - MANUFACTURER IDENTIFICATION MANUFACTURER'S NAME: Pro Guard Coatings
More informationIngredient CAS Number Weight % ACGIH TLV PEL STEL Phosphoric Acid 7664-38-2 1 mg/m3 1 mg/m3 3 mg/m3
Page 1 of 5 MSDS Document Product 1. Chemical Product and Company Identification Product Manufacturer Haviland Consumer Products, Inc. 421 Ann Street N.W. Grand Rapids, MI 49504 Phone Number (616) 361-6691
More information5375 RED LOW VOC ACETONE ACRYLIC TRAFFIC MARKING PAINT
1. PRODUCT AND COMPANY IDENTIFICATION 5375 RED LOW VOC ACETONE ACRYLIC TRAFFIC MARKING PAINT PRODUCT CODE: 5375 PRODUCT NAME: RED LOW VOC ACETONE ACRYLIC TRAFFIC MARKING PAINT PRODUCT USE: Liquid Paint
More informationSAFETY DATA SHEET SUPERCOTE ENAMEL LEAD FREE
SAFETY DATA SHEET 1 IDENTIFICATION OF THE SUBSTANCE/PREPARATION AND OF THE COMPANY/UNDERTAKING PRODUCT NAME PRODUCT NO. SUPPLIER EMERGENCY TELEPHONE 370LF Witham Group Stanley Road Oulton Broad Lowestoft
More informationCertificate of Compliance Section 1 - PRODUCT AND COMPANY IDENTIFICATION
Certificate of Compliance & Material Safety Data Sheet For Health Emergencies: CALL A POISON CONTROL CENTER For Transportation Emergencies ONLY: Call Chem-Tel USA, Canada, Puerto Rico, US Virgin Islands:
More informationSIGMAFAST 210. PRODUCT DATA SHEET December 12, 2014 (Revision of April 1, 2013) DESCRIPTION
DESCRIPTION Two-component, high-build zinc phosphate polyurethane primer/finish PRINCIPAL CHARACTERISTICS Specially designed for in-shop application Fast-curing Easy application by airless spray Unlimited
More informationMaterial Safety Data Sheet
Page: 1 of 7 1. PRODUCT AND COMPANY IDENTIFICATION MANUFACTURER: Angstron Materials, Inc. 1240 McCook Avenue Dayton, Ohio 45404 Inquiries: Fax Number: Telephone Number: http:/www.angstronmaterials.com
More informationMaterial Safety Data Sheet
Material Safety Data Sheet PREMIUM UNIVERSAL 15W/50 Issue Date January 2015 Status ISSUED by OIL TECH Not classified as hazardous according to criteria of NOHSC COMPANY DETAILS Company Name OIL TECH Pty
More informationMaterial Safety Data Sheet
Material Safety Data Sheet Collagen MSDS 1 1 0 Section 1: Chemical Product and Company Identification He a lt h Fire Re a c t iv it y Pe rs o n a l Pro t e c t io n 2 1 0 E Product Name: Collagen Catalog
More informationFila Chemicals USA FILA CR10. sds@filasolutions.com 800-424-9300 CHEMTREC
Page n.1 / 5 Safety Data Sheet 1. Identification of the substance / mixture and the Company Product name Chemical name and synonym Intended use Company identification e-mail address Emergency telephone
More informationSHOUT TRIPLE-ACTING LAUNDRY STAIN REMOVER
1. PRODUCT AND COMPANY IDENTIFICATION Product information Trade name : Use of the : Spot & Stain Remover Substance/Mixture Company : S.C. Johnson & Son, Inc. 1525 Howe Street Racine WI 53403-2236 Emergency
More informationCarpet Seam Sealer 8200
Carpet Seam Sealer 8200 DESCRIPTION Shaw 8200 is recommended for seaming/sealing most types of carpet in direct glue down installation. Shaw 8200 can also be used in double stick applications; however,
More information3M MATERIAL SAFETY DATA SHEET NO. 4004, 4008, 4026 AND 4032 DOUBLE COATED URETHANE FOAM TAPE 07/29/2002
Material Safety Data Sheet Copyright, 2002, Minnesota Mining and Manufacturing Company. All rights reserved. Copying and/or downloading of this information for the purpose of properly utilizing 3M products
More informationMATERIAL SAFETY DATA SHEET DANIEL SMITH, INC. DANIEL SMITH WORLD S BEST ACRYLIC GESSO(ALL COLORS) Date Printed: 4-12-12 Date Revised: 4-12-12
MATERIAL SAFETY DATA SHEET DANIEL SMITH, INC. DANIEL SMITH WORLD S BEST ACRYLIC GESSO(ALL COLORS) Date Printed: 4-12-12 Date Revised: 4-12-12 1. Product and Company Identification Product Name: Daniel
More informationMaterial Safety Data Sheet
Material Safety Data Sheet 1. Product and Company Information Company: Ranger Industries, Inc. 15 Park Road Tinton Falls, N.J. 07724 Telephone: (732) 389-3535 Product Name: Adirondack Alcohol Ink (All
More informationBOOSTER FLUID SOLUTION I. PRODUCT IDENTIFICATION
Date: November 2014 PRODUCT CHEMICAL METHYL ALCOHOL / BORIC ACID MATERIAL SAFETY DATA SHEETS MATERIAL SAFETY DATA SHEET CHEMICAL NAME Methanol COMMON SYNONYMS BOOSTER FLUID SOLUTION I. PRODUCT IDENTIFICATION
More informationSAFETY DATA SHEET. 955 Connecticut Ave, Suite 5202 Bridgeport, CT 06607 Tel: 800-242-1150 www.carbtrol.com Date Prepared: July 22, 2015
CARBTROL C O R P O R A T I O N SAFETY DATA SHEET Section 1 Identity Identity (As Used on Label and List): Carbtrol Type: CSV, CV, CSL, CL, CAT2 Manufacturers Name: Carbtrol Corporation 955 Connecticut
More informationMATERIAL SAFETY DATA SHEET
MATERIAL SAFETY DATA SHEET SECTION 1 : PRODUCT AND COMPANY IDENTIFICATION 1.1.Product Details Product Name: Ferrofluid Name: APG 2100 series Chemical Name: Proprietary product Chemical Formula: Mixture
More informationSafety data sheet. DK-5900 Rudkøbing
Safety data sheet 1. Identification of the substance/preparation and of the company/undertaking Prepared on: 29-09-2008/ GPS Distributor: LKF Vejmarkering A/S Longelsevej 34 Product use: Clear primer based
More informationMATERIAL SAFETY DATA SHEET
\ MATERIAL SAFETY DATA SHEET Product Name: AirBlueFluids - Diesel Exhaust Fluid (DEF) (Ultra Pure Urea Solution, 32.5%) Page 1 of 7 1. CHEMICAL PRODUCT AND COMPANY IDENTIFICATION Product Name: AirBlueFluids
More informationMATERIAL SAFETY DATA SHEET
Material Safety Data Sheet:- DIHYDROGEN MONOXIDE Page No. 2 of 5. - - 1/7/2008. Date: January 7, 2008 Replaces MSDS Dated: MATERIAL SAFETY DATA SHEET Manufacturer(s) NFPA Designation 704 GENERIC (UBIQUITOUS)
More informationRevision Date 01/26/2012 Print Date 01/26/2012
1. Product and company identification Product name Supplier Sika Corporation Polito Avenue 21 Lyndhurst, NJ 771 Telephone (21) 933-88 Telefax (21) 84-176 Emergency telephone e-mail address of person responsible
More informationWINDEX COMMERCIAL LINE GLASS CLEANER WITH AMMONIA- D
1. PRODUCT AND COMPANY IDENTIFICATION Product information Trade name : WINDEX COMMERCIAL LINE GLASS CLEANER WITH AMMONIA- Use of the : Hard Surface Cleaner Substance/Mixture Company : S.C. Johnson & Son,
More information: Sharpie King Size Permanent Markers. 3500 Lacey Road, 10th Floor Downers Grove, IL 60515 USA 800-323-0749 or 630-829-2500
PRODUCT DATA SHEET Section 1. Identification Product name : Sharpie King Size Permanent Markers Material uses : Writing instruments Manufacturer : Newell Brands 3500 Lacey Road, 10th Floor Downers Grove,
More informationMaterial Safety Data Sheet
Material Safety Data Sheet Green Tea Powder MSDS 0 He a lt h Fire Re a c t iv it y Pe rs o n a l Pro t e c t io n 0 E Section : Chemical Product and Company Identification Product Name: Green Tea Powder
More informationSpartan Chemical Company, Inc. Material Safety Data Sheet
Spartan Chemical Company, Inc. Material Safety Data Sheet SECTION I: PRODUCT INFORMATION Product Name or Number (as it appears on label): Product Division: STERIPHENE II BRAND DISINFECTANT Janitorial DEODORANT
More informationMATERIAL SAFETY DATA SHEET Page 01 of 05
MATERIAL SAFETY DATA SHEET Page 01 of 05 Loctite(R) Plumber's Choice(TM) Sealant 25826 1. CHEMICAL PRODUCT AND COMPANY IDENTIFICATION Product Type: ADHESIVE 2. COMPOSITION, INFORMATION ON INGREDIENTS Ingredients
More informationProperty Test/Standard Description. gloss (70-85) Flash point ISO 3679 Method 1. 212 F (100 C) calculated VOC-US/Hong Kong. US EPA method 24 (tested)
Not approved 2063;2064 1,2 2063 ^(ValidationDate) 1 Product description This is a two component solvent free polyamine cured coating. It is a general purpose tank lining with good chemical resistance.
More informationGRIP-GARD BC BASECOAT CHROME
Description Grip-Gard BC Basecoat Chrome is designed specifically to meet the color, application and quality demands of the Sign and Exhibit Manufacturer. Grip-Gard BC Basecoat Chrome is ideal for fast
More informationNFPA Hazard Class: * Physical Form: Solid. Health: 0 (Least) * Appearance: Yellow Flammability: 1 (Slight)
Safety Data Sheet Microcrystalline Wax 1. Chemical Product Identification Generic Name: Microcrystalline Wax INCI Name: Microcrystalline Wax Chemical Family: Mineral Emergency Telephone Numbers: Page 1
More informationProduct Code: VLB4236 310ml cartridges. Substance Name EC No. CAS No. % by Wt Hazard Symbols n Butylacetate 123 86 4 10 30 10.
1 Product and company identification Supplier: The Vapormatic Co Ltd PO Box 58, Kestrel Way Sowton Industrial Estate, Exeter, EX2 7NB, England Phone Number: 00 44 (0)1392 435461 Fax Number: 00 44 (0)1392
More informationMaterial Safety Data Sheet GREASED LIGHTNING SUPER STRENGTH CLEANER & DEGREASER
SECTION 1. PRODUCT AND COMPANY IDENTIFICATION Product name: Product Use Description: Home Care Product Chemical nature: Mixture Company: HomeCare Labs, Inc. P.O. Box 491150 Lawrenceville, GA 30049-1002
More informationProduct Name: John Deere Cool Gard II Premix (TY26575, TY26576, TY26577, TY26578) Product description: Ethylene Glycol based Antifreeze/Coolant
Page 1 of 5 Updated 07-27-2011 MATERIAL SAFETY DATA SHEET Supersedes 07-31-08 MSDS# 81Q2 1. CHEMICAL PRODUCT AND COMPANY IDENTIFICATION Product Name: John Deere Cool Gard II Premix (TY26575, TY26576, TY26577,
More informationMaterial Safety Data Sheet BZK Antiseptic Towelettes / Wipes
Issue date Oct. 02/2013 1. Product and Company Identification Product Name BZK Antiseptic Towelettes CAS # Mixture Product use Antiseptic Manufacturer Lernapharm (Loris) Inc 2323 Halpern, St-Laurent (Montreal)
More informationMaterial Safety Data Sheet
Material Safety Data Sheet Section 1 General Information Manufacturer: Zinsser Company, Inc. 173 Belmont Drive Somerset, NJ 08875 (732) 469-8100 Emergency Telephone: Chemtrec (800) 424-9300 Date: December
More informationApproved. Property Test/Standard Description. matt (0-35) Flash point ISO 3679 Method 1 27 C calculated IED (2010/75/EU) (calculated)
Approved 402;2521 1 2521 zinc epoxy ^(ValidationDate). 1 Product description This is a two component polyamide cured zinc rich epoxy coating. It is a very high zinc dust containing product. It conforms
More informationMATERIAL SAFETY DATA SHEET In accordance with CE Regulation n 1907/2006. Annex II.
Ref.: BA/909 ELSACYFRA Page: 1 of 5 RRR1. Identification of preparation and of the company/undertaking 1.1 Product name: ELSACYFRA 1.2 Use With the exception of products specifically labeled for In Vitro
More informationWINDEX ORIGINAL GLASS CLEANER WITH AMMONIA-D
1. PRODUCT AND COMPANY IDENTIFICATION Product information Product name : WINDEX ORIGINAL GLASS CLEANER WITH AMMONIA- D Recommended use : Hard Surface Cleaner Manufacturer, importer, supplier : S.C. Johnson
More informationView MSDS Section : SECTION 1 - PRODUCT AND COMPANY IDENTIFICATION. * Chronic Health Effects SECTION 2 - COMPOSITION/INFORMATION ON INGREDIENTS
View MSDS Section : 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 SECTION 1 - PRODUCT AND COMPANY IDENTIFICATION Product Name: Product Code: MSDS Manufacturer Number: Manufacturer Name: Address: KILZ Clean Start
More informationMaterial Safety Data Sheet
Material Safety Data Sheet 1. PRODUCT AND COMPANY IDENTIFICATION turtle wax, inc 625 Willowbrook Ctr Pkwy Willowbrook, Illinois 60527 PRODUCT NAME PRODUCT CODE CHEMICAL FAMILY CHEMICAL NAME FORMULA MANUFACTURER
More information