2060 SERIES 120/277V LED

Transcription

1 LUMELEX 0 SERIES 0/V LED Elegant fixed downlight designed specifically for the most demanding architecture applications. Designed for an LED module up to Watts in three formats: Xicato XTM (1mm), Xicato XTM (mm), and Dim to Warm General Features Tested to LM and LM0 Protocols, TM-0 available Hidden integral electronic driver compatible with reverse phase (ELV compatible) dimmers down to % Field interchangeable optics (1-0 ) modify the beam spread distribution Accessory holder accepts up to two size-a LSI filters and accessories Integral dimmer available Finishes: LSI Black, White, and Silver Fixture weight: lbs All modules are field replaceable Xicato XTM Module Extremely tight color consistency (less than MacAdam Ellipses) System efficiency up to lumens/watt Backed by Xicato s Five Year Color Consistency and Lumen Maintenance Warranty 0,000 hour life to 0% lumen output, L0 at F max ambient Choice of color temperature Color Rendering Index (CRI) of either (high) or (standard) Color Fidelity (Rf) (high) or (standard) Gamut Area Index (Rg) (high) or 1 (standard) Choice of lumen outputs (delivered lumens) Dim to Warm Module Natural dimming that approximates the black body curve System efficiency up to lumens/watt,000 hour life to 0% lumen output, L0 at F max ambient Halogen mimicking color from 000 K to 00 K Color Rendering Index (CRI) of min. at all dimming settings Color Fidelity (Rf) Gamut Area Index (Rg) Lumen output: 0 Lumens Proprietary mixing optics for smooth even light MOUNTING OPTIONS Please review the ORDERING INFORMATION section on the next page on how to specify the following: Lumens/CRI/Wattage Color Temperature Optic - mm/beam spread LX0-XXXXX-XXXXXX-00-XXXXXX Lexan fitting for 1 and circuit LSI track. With On/Off switch. LX0-XXXXX-XXXXXX-00-EDXXXX Lexan fitting for 1 and circuit LSI track. Integral dimmer (for use with ED dimming driver %). LX0-XXXXX-XXXXXX-LT-LTXXXX Lexan fitting with LumenTalk dimmer (for use with LT dimming driver (<1%). LX0-XXXXX-XXXXXX-G-XXXXXX Universal fitting for Unistrut Systems and any screw or bolt-up applications. With switch, -foot -wire grounding cord and NEMA -1P plug. /1 1/ /1 LX0-XXXXX-XXXXXX-G-XXXXXX C-clamp for pipes from / to O.D. With switch, -foot -wire grounding cord and NEMA -1P plug. LX0-XXXXX-XXXXXX-A-XXXXXX Canopy for permanent mounting on standard octagonal junction boxes. Other Options (Consult Factory): Stems, specify length ( - 1 ) Custom color, RAL palette Security/Worklite Fixture, use EF as mounting option (track mount only) /1 /1

2 1/1" 1mm ORDERING INFORMATION Xicato XTM 1mm Fixture /1" mm /1 mm /1" mm 1/1" mm /1" mm /1" 1mm 1. Choose the desired (T1) for XTM (1mm). Choose the numeric code to designate the desired LED Rating Lumens/CRI/Wattage (-) for 00// (-) for 00// (-) for 00//1 (-) for 00// (-) for 00// (-) for 00//1 (-) for 0// (0-) for 000// (-) for 00//. Choose the numeric code to designate the desired Color Temperature () for 0K (0) for 000K (V) for Vibrant 000K For other CCT, consult factory. Use the following alpha-numeric code to designate the Optic (S1) for 0mm/1 (WR) for 0mm/ (Field Reducer) (M) for 0mm/ (Narrow Field Angle) (M) for 0mm/ (Wide Field Angle) (M) for 0mm/ (Narrow Field Angle) (M) for 0mm/0 (Wide Field Angle) (M) for 0mm/0 /1" mm. Select your Mounting Option (00) Track Fitting (LT) Lumentalk Fitting (G) Unistrut Fitting (G) C-clamp Fitting (A) Canopy Fitting. Choose other fixture Options: Coiled Cord is available only with G and G mounting options. Change G to C and G to C. (When a coiled cord is not specified, a straight cord is provided.). Choose the letter code for Dimming Type: (TE) Trailing Edge (Reverse Phase) (%) (ED) Integral Dimming (%) (00 & A fitting only) (LT) Lumentalk (<1%) (LT fitting only) () 0-V (%) (A fitting only). Choose the desired Voltage: (0) for 0V () for -V () for V. Choose a Finish for your fixture: Black (B) White (W) Silver (S) Example: LX0 - T1 - S TE 0 B Color Temperature & Center Point Tolerance Color Temp Center Point Tolerance 0K 0K +/- 0K 000K K +/- 0K 00K K +/- 0K 000K 000K +/- 0K Chromaticity Specifications Rg- Gamut LED Ra- CRI Rf- Fidelity Area T1-TS - 1 T1-TS - FIXTURE LED MODULE LED RATING COLOR TEMP OPTIC FITTING DRIVER VOLTAGE FINISH. Don t forget your Accessories! ACCESSORIES Hood SPT A ANG Hood SPT A Backer Ring A Louver Hex A Glass Color Filters A Spread Lens A0, A, A, A Beam Softener A Light Blocking Screens A01S, A0S, A0S Color and Spread Gels A LX-S1-REF-B (0mm/1 ) LX-WRD-REF-CLR (0mm/ ) LX-M-REF-B (0mm/ ) LX-M0-REF-CLR (0mm/ ) LX-M0-REF-B (0mm/ ) LX-M0-REF-CLR (0mm/0 ) LX-M0-REF-CLR (0mm/0 ) Field Reducer Solid State /1

3 LUMELEX 0 SERIES XICATO XTM 1MM PERFORMANCE The performance characteristics of the LumeLEX family of products can be customized based on the LED module and the optic (reflector) selected. Each available LED module is defined by four characteristics the color rendering index (CRI), the correlated color temperature (CCT), the power that it uses (watts), and its available lumens. Note that available lumens is a theoretical value that represents the light output of the module on its own no fixture or optic attached. In the LSI part number, the LED module is specified with a letter and a number that immediately follow the product series number. For example, in the part number LX0-T0-S1-00-TE0B, the T0- represents an LED module with an output of 00 lumens, a CRI of, a power usage of watts and a color temperature of 0K. The available optics (reflectors) are characterized by size, beam angle, and in some cases the characteristics of the field angle (narrow or wide). The optic is specified by the two characters that follow the LED designation in the part number. For example, the S1 in T0-S1-00- TE0B is a 0mm diameter optic that has a 1-Degree beam with a narrow field. Additional parameters, such as Center Beam Candle Power (CBCP), Delivered Lumens, and Efficiency (Lumens per Watt) are all shown in a table that is organized by LED module and optic combination. CBCP = Center Beam Candle Power Lumens/CRI/Wattage S1 M WR M M M M 00// // //1 1 00// 1 00// // // // // 1 0 Delivered Lumens Lumens/CRI/Wattage S1 M WR M M M M 00// // // // // // // // // Efficiency = Lumens Per Watt Lumens/CRI/Wattage S1 M WR M M M M 00// // 1 00//1 1 00// // 1 00// // // // 1 Absolute range of values are +/- % of typical value, and are for all color temperatures Lumens/CRI/Wattage 00// 00// 00//1 00// 00// 00//1 0// 000// 00// Letter Code Nominal Fixture Power (+/- %), Watts 1 1 Maximum Inrush Current Amps Minimum Power Factor Inrush current is instantaneous current drawn by the LED only when fixture is initially powered on or instantaneously changed from full dim to full bright. For more details see Dimming Application Sheet, IS-0. /1

4 LUMELEX 0 SERIES XICATO XTM 1MM OPTICS 1/ (mm) 1/1 (mm) LX-S1-REF-B (S1) (0mm/1 ) Anti-reflective coated aspheric lens. Tool-less, twist and Black finish. 1 1/1 (mm) / (0mm) LX-M0-REF-B (M) (0mm/ ) (Narrow Field Angle) Computer designed polycarbonate specular optic. Tool-less, twist and Black finish. 1 / (mm) / (0mm) LX-M-REF-B (M) (0mm/ ) (Narrow Field Angle) Computer designed polycarbonate lens. Tool-less, twist and Black finish. 1 / (mm) / (0mm) LX-M0-REF-CLR (M) (0mm/0 ) (Wide Field Angle) Computer designed polycarbonate specular optic. Tool-less, twist and 1 / (mm) / (0mm) LX-M0-REF-CLR (M) (0mm/ ) (Wide Field Angle) Computer designed polycarbonate specular optic. Tool-less, twist and 1 / (mm) / (0mm) LX-M0-REF-CLR (M) (0mm/0 ) Computer designed polycarbonate specular optic. Tool-less, twist and (mm) LX-WRD-REF-CLR (WR) (0mm/ ) Field reducer. Proprietary field reducing baffle. / (0mm) Solid State /1

5 LUMELEX 0 SERIES XICATO XTM 1MM PHOTOMETRIC DATA LED RATING: - S1-0mm DIA Optic Beam Spread (minimum) 1 Center Beam Candlepower CRI M- 0mm DIA Optic (NFA: Narrow Field Angle) Beam Spread (minimum) Center Beam Candlepower CRI WR- 0mm DIA Optic (FR: Field Reducer) Beam Spread (minimum) Center Beam Candlepower CRI M- 0mm DIA Optic (NFA: Narrow Field Angle) Beam Spread (minimum) Center Beam Candlepower CRI M- 0mm DIA Optic (NFA: Narrow Field Angle) Beam Spread (minimum) 0 Center Beam Candlepower CRI M- 0mm DIA Optic (WFA: Wide Field Angle) Beam Spread (minimum) 0 Center Beam Candlepower CRI M- 0mm DIA Optic (WFA: Wide Field Angle) Beam Spread (minimum) Center Beam Candlepower 1 CRI LED RATING: - S1-0mm DIA Optic Beam Spread (minimum) 1 Center Beam Candlepower 00 CRI M- 0mm DIA Optic (NFA: Narrow Field Angle) Beam Spread (minimum) Center Beam Candlepower CRI WR- 0mm DIA Optic (FR: Field Reducer) Beam Spread (minimum) Center Beam Candlepower CRI M- 0mm DIA Optic (NFA: Narrow Field Angle) Beam Spread (minimum) Center Beam Candlepower 01 CRI M- 0mm DIA Optic (NFA: Narrow Field Angle) Beam Spread (minimum) 0 Center Beam Candlepower 1 CRI M- 0mm DIA Optic (WFA: Wide Field Angle) Beam Spread (minimum) 0 Center Beam Candlepower 0 CRI M- 0mm DIA Optic (WFA: Wide Field Angle) Beam Spread (minimum) Center Beam Candlepower 0 CRI LED RATING: - M (0 ) NFA 1 1 All Max. Footcandles at 0 Beam Axis LED RATING: - All Max. Footcandles at 0 Beam Axis M (0 ) NFA M (0 ) WFA 0 1 M (0 ) WFA M ( ) NFA M ( ) WFA WR ( ) FR M ( ) NFA All Distances in Feet 0 Photometric Data based on LED Rating: - (00 Lumens/CRI/watts) *WFA Optics not represented in graph M ( ) NFA M ( ) WFA WR ( ) FR M ( ) NFA S1 (1 ) S1 (1 ) All Distances in Feet Photometric Data based on LED Rating: - (00 Lumens/CRI/watts) *WFA Optics not represented in graph /1

6 1/1" 1mm ORDERING INFORMATION Xicato XTM mm Fixture /1" mm /1 mm /1" mm 1/1" mm /1" mm /1" 1mm 1. Choose the desired (TS) for XTM (mm). Choose the numeric code to designate the desired LED Rating Lumens/CRI/Wattage (0-) for 00// (0-) for 00//1 (0-) for 00// (-) for 00// (-) for 00// (-) for 00//. Choose the code to designate the desired Color Temperature () for 0K (0) for 000K (V) for Vibrant 000K For other CCT, consult factory. Use the following alpha-numeric code to designate the Optic (N1) for 0mm/ (NR) for 0mm/ (Field Reducer) (N) for 0mm/ (N) for 0mm/0 (N) for 0mm/0. Select your Mounting Option (00) Track Fitting (LT) Lumentalk Fitting (G) Unistrut Fitting (G) C-clamp Fitting (A) Canopy Fitting /1" mm. Choose other fixture Options: Coiled Cord is available only with G and G mounting options. Change G to C and G to C. (When a coiled cord is not specified, a straight cord is provided.). Choose the letter code for Dimming Type: (TE) Trailing Edge (Reverse Phase) (%) (ED) Integral Dimming (%) (00 & A fitting only) (LT) Lumentalk (<1%) (LT fitting only) () 0-V (%) (A fitting only). Choose the desired Voltage: (0) for 0V () for -V () for V. Choose a Finish for your fixture: Black (B) White (W) Silver (S) Example: LX0 - TS - N TE 0 B FIXTURE LED MODULE LED RATING COLOR TEMP OPTIC FITTING DRIVER VOLTAGE FINISH Color Temperature & Center Point Tolerance. Don t forget your Accessories! Color Temp Center Point Tolerance 0K 0K +/- 0K 000K K +/- 0K 00K K +/- 0K 000K 000K +/- 0K Chromaticity Specifications Rg- Gamut LED Ra- CRI Rf- Fidelity Area T1-TS - 1 T1-TS - ACCESSORIES Hood SPT A ANG Hood SPT A Backer Ring A Louver Hex A Glass Color Filters A Spread Lens A0, A, A, A Beam Softener A Light Blocking Screens A01S, A0S, A0S Color and Spread Gels A LX-N-REF-CLR (0mm/ ) LX-NRD-REF-CLR (0mm/ ) Field Reducer LX-N-REF-CLR (0mm/ ) LX-N0-REF-CLR (0mm/0 ) LX-N0-REF-CLR (0mm/0 ) Solid State /1

7 LUMELEX 0 SERIES XICATO XTM MM PERFORMANCE The performance characteristics of the LumeLEX family of products can be customized based on the LED module and the optic (reflector) selected. Each available LED module is defined by four characteristics the color rendering index (CRI), the correlated color temperature (CCT), the power that it uses (watts), and its available lumens. Note that available lumens is a theoretical value that represents the light output of the module on its own no fixture or optic attached. In the LSI part number, the LED module is specified with a letter and a number that immediately follow the product series number. For example, in the part number LX0-TS-N1-00-TE0B, the TS- represents an LED module with an output of 00 lumens, a CRI of, a power usage of watts and a color temperature of 0K. The available optics (reflectors) are characterized by size, beam angle, and in some cases the characteristics of the field angle (narrow or wide). The optic is specified by the two characters that follow the LED designation in the part number. For example, the N1 in TS-N1-00- TE0B is a 0mm diameter optic that has a -Degree beam. Additional parameters, such as Center Beam Candle Power (CBCP), Delivered Lumens, and Efficiency (Lumens per Watt) are all shown in a table that is organized by LED module and optic combination. CBCP = Center Beam Candle Power Absolute range of values are +/- % of typical value, and are for all color temperatures Lumens/CRI/Wattage N1 NR N N N 00// 00// // 01 00// // // Delivered Lumens Lumens/CRI/Wattage N1 NR N N N 00// //1 1 00// 1 00// // // Efficiency = Lumens Per Watt Lumens/CRI/Wattage N1 NR N N N 00// 1 00//1 1 00// 00// // // 1 Lumens/CRI/Wattage 00// 00//1 00// 00// 00// 00// Letter Code Nominal Fixture Power (+/- %), Watts 1 Maximum Inrush Current Amps Minimum Power Factor Inrush current is instantaneous current drawn by the LED only when fixture is initially powered on or instantaneously changed from full dim to full bright. For more details see Dimming Application Sheet, IS-0. /1

8 LUMELEX 0 SERIES XICATO XTM MM OPTICS 1 / (mm) LX-N-REF-CLR (N1) (0mm/ ) Faceted reflectively coated metal optic. Tool-less twist and (mm) LX-NRD-REF-CLR (NR) (0mm/ ) Field reducer. Proprietary field reducing baffle. / (0mm) / (0mm) 1 / (mm) LX-N-REF-CLR (N) (0mm/ ) Faceted reflectively coated metal optic. Tool-less twist and 1 / (mm) LX-N0-REF-CLR (N) (0mm/0 ) Faceted reflectively coated metal optic. Tool-less twist and / (0mm) / (0mm) 1 / (mm) LX-N0-REF-CLR (N) (0mm/0 ) Faceted reflectively coated metal optic. Tool-less twist and / (0mm) Solid State /1

9 LUMELEX 0 SERIES XICATO XTM MM PHOTOMETRIC DATA LED RATING: - N1-0mm DIA Optic Beam Spread (minimum) Center Beam Candlepower 00 CRI NR- 0mm DIA Optic (FR: Field Reducer) Beam Spread (minimum) Center Beam Candlepower 0 CRI N- 0mm DIA Optic Beam Spread (minimum) Center Beam Candlepower CRI N- 0mm DIA Optic Beam Spread (minimum) 0 Center Beam Candlepower CRI N- 0mm DIA Optic Beam Spread (minimum) 0 Center Beam Candlepower CRI LED RATING: - N1-0mm DIA Optic Beam Spread (minimum) Center Beam Candlepower 000 CRI NR- 0mm DIA Optic (FR: Field Reducer) Beam Spread (minimum) Center Beam Candlepower 1000 CRI N- 0mm DIA Optic Beam Spread (minimum) Center Beam Candlepower 00 CRI N- 0mm DIA Optic Beam Spread (minimum) 0 Center Beam Candlepower 00 CRI N- 0mm DIA Optic Beam Spread (minimum) Center Beam Candlepower 0 CRI All Max. Footcandles at 0 Beam Axis All Max. Footcandles at 0 Beam Axis LED RATING: - N (0 ) 0 1 LED RATING: - N (0 ) N ( ) NR ( ) FR N1 ( ) All Distances in Feet 0 Photometric Data based on LED Rating: - (00 Lumens/CRI/watts) N (0 ) N (0 ) N ( ) NR ( ) FR N1 ( ) All Distances in Feet Photometric Data based on LED Rating: - (00 Lumens/CRI/watts) /1

10 1/1" 1mm ORDERING INFORMATION Dim to Warm Fixture /1" mm /1 mm /1" mm 1/1" mm /1" mm /1" 1mm 1. Choose the desired (D1) for Dim to Warm (1mm). Choose the numeric code to designate the desired LED Rating Lumens/CRI/Wattage (-) for 0//. Choose the code to designate the desired Color Temperature (DW) for 000K to 00K. Use the following alpha-numeric code to designate the Optic (W) for mm/ (W) for mm/0 (W) for mm/0 (W) for mm/0 (WR) for 0mm/ (Field Reducer). Select your Mounting Option (00) Track Fitting (LT) Lumentalk Fitting (G) Unistrut Fitting (G) C-clamp Fitting (A) Canopy Fitting. Choose other fixture Options: Coiled Cord is available only with G and G mounting options. Change G to C and G to C. (When a coiled cord is not specified, a straight cord is provided.) /1" mm. Choose the letter code for Dimming Type: (TE) Trailing Edge (Reverse Phase) (%) (ED) Integral Dimming (%) (00 & A fitting only) (LT) Lumentalk (<1%) (LT fitting only) () 0-V (%) (A fitting only). Choose the desired Voltage: (0) for 0V () for -V () for V. Choose a Finish for your fixture: Black (B) White (W) Silver (S) Example: LX0 - D1 - DW W -00- TE 0 B FIXTURE LED MODULE LED RATING COLOR TEMP OPTIC FITTING DRIVER VOLTAGE FINISH. Don t forget your Accessories! Chromaticity Specifications Rg- Gamut LED Ra- CRI Rf- Fidelity Area D1 ACCESSORIES ANG Hood IN A Hood IN A Glass Color Filters A Color and Spread Gels A Backer Ring AB Louver Hex A Beam Softener A Lighting Blocking Screens A01S, A0S, A0S Spread Lenses A0,A, A, A LX-W-REF-CLR (mm/ ) LX-W0-REF-CLR (mm/0 ) LX-W0-REF-CLR (mm/0 ) LX-W0-REF-CLR (mm/0 ) LX-WRD-REF-CLR (0mm/ ) Field Reducer Solid State /1

11 LUMELEX 0 SERIES DIM TO WARM PERFORMANCE The performance characteristics of the Dim to Warm LumeLEX family of products can be customized based on the optic (reflector) selected. The behavior of the Dim to Warm modules links the color of the light to the dimmed output of the fixture just like a halogen or incandescent source. Therefore the four characteristics defining the color the color rendering index (CRI), the correlated color temperature (CCT) range, the power that it uses (watts), and its available lumens are linked to the dim setting. Note that available lumens is a theoretical value that represents the light output of the module on its own no fixture or optic attached. Also note that the CRI of this fixture is a minimum of at any dimming setting. In the LSI part number, the LED module is specified with a letter and a number that immediately follow the product series number. For example, in the part number LX0-D-DWW-00-TE0B, the D-DW represents a Dim to Warm LED module with an output of 0 lumens, a CRI of, a power usage of watts and a color temperature range of 000K 00K that is tied to the dimming setting. The available optics (reflectors) are characterized by size, beam angle, and in some cases the characteristics of the field angle (narrow or wide). The optic is specified by the two characters that follow the LED designation in the part number. For example, the W in LX0-D-DWW-00-TE0B is a 0mm diameter optic that has a -Degree beam. Additional parameters, such as Center Beam Candle Power (CBCP), Delivered Lumens, and Efficiency (Lumens per Watt) are all shown in a table that is organized by LED module and optic combination. CBCP = Center Beam Candle Power Absolute range of values are +/- % of typical value, and are for all color temperatures Lumens/CRI/Wattage W WR W W W 0// 0 0 Delivered Lumens Lumens/CRI/Wattage W WR W W W 0// Efficiency = Lumens Per Watt Lumens/CRI/Wattage W WR W W W 0// 1 1 Lumens/CRI/Wattage 0// SKU Code - Nominal Fixture Power (+/- %), Watts Maximum Inrush Current Amps Minimum Power Factor 0. Inrush current is instantaneous current drawn by the LED only when fixture is initially powered on or instantaneously changed from full dim to full bright. For more details see Dimming Application Sheet, IS-0. /1

12 LUMELEX 0 SERIES DIM TO WARM OPTICS 1 /1 (mm) LX-W-REF-CLR (W) (mm/ ) Faceted reflectively coated metal optic. Tool-less twist and (mm) LX-WRD-REF-CLR (WR) (0mm/ ) Field reducer. Proprietary field reducing baffle. / (0mm) / (0mm) 1 /1 (mm) / (0mm) LX-W0-REF-CLR (W) (mm/0 ) Faceted reflectively coated metal optic. Tool-less twist and 1 /1 (mm) / (0mm) LX-W0-REF-CLR (W) (mm/0 ) Faceted reflectively coated metal optic. Tool-less twist and 1 /1 (mm) LX-W0-REF-CLR (W) (mm/0 ) Faceted reflectively coated metal optic. Tool-less twist and / (0mm) Solid State /1

13 LUMELEX 0 SERIES DIM TO WARM PHOTOMETRIC DATA LED RATING: - W-mm DIA Optic Beam Spread (minimum) Center Beam Candlepower CRI WR-0mm DIA Optic Beam Spread (minimum) (FR: Field Reducer) Center Beam Candlepower 0 CRI W-mm DIA Optic Beam Spread (minimum) 0 Center Beam Candlepower 0 CRI W-mm DIA Optic Beam Spread (minimum) 0 Center Beam Candlepower CRI W-mm DIA Optic Beam Spread (minimum) 0 Center Beam Candlepower CRI LED RATING: - W (0 ) All Max. Footcandles at 0 Beam Axis W (0 ) W (0 ) WR ( ) FR W ( ) All Distances in Feet Photometric Data based on LED Rating: - (0 Lumens/CRI/watts) /1

14 LUMELEX 0 ACCESSORIES HOOD SPT A inch deep hood BACKER RING A Stainless steel ring to hold gel when no other size A accessories are being used. ANG HOOD SPT A inch deep angled hood 1. LIGHT BLOCKING SCREENS A Stainless steel mesh screens used alone or in combinations will block from approximately % to 0% of the transmitted light without changing color temperature of the light. No. % of Light Blocked A01S A0S 0 A0S 0 SPREAD LENSES AND BEAM SOFTENER No. Description % of Light Transmission 0 Spread Lens/Clear ( X 0 ) Spread Lens/Clear ( X 0 ) Spread Lens/Clear (0 X 0 ) Spread Lens/Clear ( X 0 ) Beam Softener/Clear 0 ( X ) LOUVER HEX A 1/ thick Hexcell black metal louver used for thin profile. 1. Figures vary based upon /Optic being used and relationship of screen(s) to /Optic and to each other. Solid State /1

15 LUMELEX 0 SERIES GELS As the foremost innovator in accent lighting, LSI offers a complete range of pre-cut Gels to modify the spread and color of light for the LumeLEX LED Series. LumeLEX SPREAD GELS (FOR LumeLEX 0) Size: A ( mm diameter) Spread Gel GEL-L1-A GEL-L-A GEL-L-A GEL-L-A GEL-L0-A GEL-L0-A GEL-L0-A GEL-L0-A GEL-L0B-A GEL-L0B-A GEL-L0B1-A GEL-L0B-A GEL-LB-A GEL-L0B0-A GEL-R1-A 1 Spread Gel Spread Gel Spread Gel Spread Gel 0 Spread Gel 0 Spread Gel 0 Spread Gel 0 Spread Gel 0 by Spread Gel 0 by 0. Spread Gel 0 by 1 Spread Gel 0 by Spread Gel by Spread Gel 0 by 0 Spread Gel Beam Softener LumeLEX COLOR GELS (FOR LumeLEX 0) Size: A ( mm diameter) GEL-R-A GEL-R-A GEL-R-A GEL-R-A GEL-R1-A GEL-R-A GEL-R-A GEL-R-A GEL-R-A GEL-R-A GEL-R-A GEL-R1-A GEL-R-A GEL-R1-A GEL-R-A GEL-R-A GEL-R1-A GEL-R-A GEL-R-A GEL-R1-A GEL-R0-A Gel Color Bastard Amber Pale Yellow Straw Straw Tint Medium Straw Golden Amber Orange Red Light Red Medium Red Lavender Booster Blue Sea Blue Azure Blue Primary Green Light Grey Medium Grey Light Frost Tough Silk Lt. Hamburg Frost Blue Diffusion Rose Gold Size: A ( mm diameter) Gel Color GEL-R-A Canary GEL-R-A Half Blue GEL-R1-A Shell Pink GEL-R-A Sapphire Blue GEL-R-A Pale Grey GEL-R01-A Storaro Red GEL-R0-A Storaro Green GEL-R0-A Storaro Violet GEL-R-A Full Blue GEL-R-A Third Blue GEL-R-A Eighth Blue (Boosts 0K to 00K) GEL-R1-A Tough 1/ Minusgreen GEL-R-A Roscosun (1/ CTO) (Reduces 00K to 00K) GEL-R1-A Full Straw (CTS) GEL-R-A Quarter Straw (CTS) GEL-R0-A CalColor 0 Cyan GEL-R1-A CalColor 1 Green GEL-R0-A CalColor 0 Green GEL-R0-A CalColor 0 Pink GEL-R0-A CalColor 0 Pink GEL-R0-A CalColor 0 Lavender /1

16 COLOR MEDIA COLOR FILTERS As the foremost innovator in accent lighting, LSI offers a complete range of permanent fade-free glass color filters, which are available in nine stock diameters. All glass color filters are rimmed in a seamless aluminum ring and are slotted for heat expansion. Size Diameter LSI Fixture Series AAA / LumeLEX /0/1/, SSLGR1, LumeLEX MAR AA LumeLEX (with LX-Holder or LX-Barndoor), LumeLEX, LumeLEX, LumeLEX A 1/ LumeLEX 0, SSL, SSLGR0CL, SSLGR C / SSL, SSLGRCL, LumeLEX Special Glass Color Filters LSI will fabricate, on special order, glass color filters in most sizes and shapes. FS Color Filter Samples To facilitate selection of glass color filters, LSI supplies a complete set of 1 / X 1 / labeled glass and dichroic samples in a handy carrying case. Multicolor Filters Unique LSI four color glass filters create rich exciting blended color effects on all objects with brilliant four color fringed shadows on background. No. Glass Colors Used 0 /0// 1 /0// ///0 /0// ///0 Duocolor Filters LSI two color glass filters blend to form one unique color that previously could only be achieved by using two separate color filters in the same fixture. Two color fringed shadows produced on background. No. Glass Colors Used 0 / 1 / /0 / /0 0/ / Notes: 1. Values given are approximate due to slight variations in glass color and thickness. 1 % of Light No. Color Transmission 0 Medium Pink 0 Deep Pink 0 Flesh Pink 0 Pale Lavender 1 0 Surprise Pink 1 0 Lilac Warm Red Strawberry Ruby Magenta 1 1 Light Amethyst 1 Medium Amethyst 1 1 Deep Amethyst 1 Olive 1 1 Light Green Medium Green Deep Green Silver green Yellow Green Emerald Green Light Turquoise Medium Turquoise 0 Deep Turquoise 1 Light Blue 0 Medium Blue Daylight Gene Moore Blue 1 Grey Light Blue Green 1 Light Amber 0 Medium Amber 1 Deep Amber Straw Gold Canary Yellow Lemon 1 Pumpkin Tangerine Orange Pink Gold 0 Bronze 1 Brass Autumn Tan Leaf Brown 1 Butter Pecan Toasted Almond 1 /1

17 COLOR MEDIA DICHROIC COLOR FILTERS In addition to our complete line of glass color filters, LSI now offers dichroic glass color filters that achieve purer, more saturated, richer color by selective wavelength transmission. Since these filters reflect rather than absorb the unwanted color wavelengths, a higher intensity of colored light can be obtained with fewer or lower wattage fixtures. In addition, this selective transmission allows for very accurate color matching from filter to filter. All standard LSI filter sizes are available in a wide palette of well chosen dichroic colors that can be used with all LSI fixtures that accept accessories. LSI dichroic glass color filters have the added benefit of being rimmed for extra durability to allow for frequent usage without fear of breakage or edge chipping. Size Diameter LSI Fixture Series AAA / LumeLEX /0/1/, SSLGR1, LumeLEX MAR AA LumeLEX (with LX-Holder or LX-Barndoor), LumeLEX, LumeLEX, LumeLEX A 1/ LumeLEX 0, SSL, SSLGR0CL, SSLGR C / SSL, SSLGRCL, LumeLEX Special Glass Color Filters LSI will fabricate, on special order, dichroic glass color filters in most sizes and shapes not exceeding a diameter circle overall. FS Color Filter Samples To facilitate selection of glass color filters, LSI supplies a complete set of 1 / X 1 / labeled glass and dichroic samples in a handy carrying case. Technical Data Dichroic color filters are created in a vacuum chamber by multi-layer vapor deposits of different minerals onto low expansion, chemically resistant Borosilicate glass. Deposits are made in alternating layers of varying microscopic thickness which allow very narrow color wavelengths to be selectively transmitted and all other wavelengths to be reflected. LSI does not recommend using dichroic color filters with lamps or fixtures that have beam spreads greater than 0 because a secondary color aura is created by the wide angular transmitted wavelengths that are different than the desired color wavelength. Since there is mainly transmission and reflection of the color wavelengths by the dichroic filter and very little absorption, the dichroic filter can be used with many high temperature lights that normally would not accept color filters. % of Light No. Color Transmission 01 Light Pink 0 Medium Pink 0 Hot Pink 0 Pale Pink Deep Magenta Lavender Vivid Magenta 1 Lavender Accent 1 Lilac 1 Purple Fusion Sky Blue Sea Blue Cyan Light Blue Green 0 Primary Blue Medium Red Blue 1 Deep Purple 1 Peacock Blue Mediterranean Blue Boost Blue 1 0 Light Yellow Green 1 Fern Green Turquoise Primary Green 1 Industrial Green 0 Yellow 0 1 Amber 1 Amber Blush Bastard Amber 1 Goldenrod Bright Straw 0 Medium Orange 1 1 Orange 0 Flame Red 1 Primary Red Solid State /1