QuickSpecs. Overview. Compaq Smart Array Cluster Storage. What s New. At A Glance

Transcription

1 Overview What s New Smart Array Cluster Controller now supports up to 512 MB of Battery Backed Cache (2x256 MB) Smart Array Cluster Storage now supports Hot Plug AIT and DAT tape drives in the storage enclosure. Now supports more ProLiant servers including: ML330 G2, ML350 G2, ML370 G2, DL360 G2, DL380 G2, DL580, and DL760 Enhanced firmware Auto- Cloning Support for SuSe SLES 7 Linux At A Glance Two Node SCSI Clustering or single node Direct Attached with ProLiant Servers. Redundant capable Smart Array Controllers with LCD screen to show system status messaging. Seamless Drive Migration (DtS) for Compaq Hot Plug Universal Hard Drives. Supports Ultra2 and Ultra3 Compaq Universal Hot Pluggable Hard Disks. Fully convertible to StorageWorks MSA-1000 SAN by Compaq. Rack mountable with rail kit included. Total storage capacity of 1 TB, by using 14 Compaq Universal Hard Disks of 72 GB each. Redundant Power Supplies and Fans standard. RAID 0, 1, 1+0, 5 and ADG. Advanced Data Guarding (ADG), uses dual parity to protect against multiple drive failures. Pre-Failure Warranty that covers disk drives Certain restrictions and exclusions apply. Consult the Compaq Customer Support Centre at for details. DA Canada Version 4 June 25,

2 Standard Features O VERVIEW Smart Array Cluster Storage The is the next generation Ultra3 SCSI storage system designed specifically for 2-node clustering or single node direct attached storage. Designed to reduce the complexity and expense of clustering, the Smart Array Cluster Storage is built upon Smart Array and ProLiant technologies to provide advanced data protection features yet is simple to deploy, configure and manage. Ideal for entry level clustering, the Smart Array Cluster Storage is based on SCSI technology, making it a familiar and powerful clustering solution. As the customer s clustering and storage requirements grow, the Smart Array Cluster Storage may be converted to a SAN array by replacing the controller(s) and I/O module and installing a FC I/O (FC HUB) or FC switch, providing the customer with extended hardware investment protection into the future. The Smart Array Cluster Storage combines the array controller shelf and the drive shelf, which holds up to fourteen 1 Compaq Universal Disk drives in a single 4U rack mount cabinet, that s over 1 terabyte of storage. The Smart Array Cluster Storage can be remotely managed by using management tools such as Compaq Insight Manager 7, and Array Configuration Utility XE. The Smart Array Cluster Storage offers the following key features: High performance Smart Array controller(s) with LCD for system status messages. 4U rack mount chassis combining both the controller and disk shelf. Ultra3 SCSI back panel and drive interconnect. Optional redundant Smart Array controller. Support for AIT and DAT Hot Plug tape drives in the storage enclosure. Support for Compaq Ultra2 and Ultra3 Universal 1 Drives. Support for select ProLiant servers (see Server Compatibility on page 14 or for latest compatibility). Note: This Web site is available in English only. Redundant power supplies and fans are standard. RAID levels 0, 1, 1+0, 5, RAID ADG. Array Configuration Utility (ACU-XE) for online storage management. Compaq Insight Manager 7. S MART A RRAY C LUSTER S TORAGE H IGHLIGHTS High Levels of Performance, Data Protection and Functionality High Performance Data transmission rate of 14,000 IOPS - 2 Node cluster configuration using Smart Array 5i embedded controller in the ProLiant servers Storage Capacity The Smart Array Cluster Storage cabinet supports up to fourteen 1 Universal hard drives, for a maximum of 1TB of storage capacity using Compaq 72.8 GB Wide Ultra3 SCSI Universal 1 hard drives. Data Protection Smart Array Cluster Storage is designed for a high level of data protection. It includes redundant controllers (optional), redundant fans and power supplies (standard); support for Hot Pluggable AIT and DAT tape drives in the storage enclosure, transportable battery backed cache and RAID ADG (standard). Storage Manageability The Smart Array Controllers feature familiar configuration and management tools such as the ACU XE. Online Management Features: Online Capacity Expansion, Online RAID Level Migration, Online Stripe Size Migration, Online Spares (Global), User Selectable Read/Write cache, User Selectable Expand and Rebuild Priority. Choice of Computing Platform -- The Smart Array Cluster Storage is designed and qualified for ProLiant servers. Advanced Data Guarding (RAID ADG) Fault Tolerance This is the highest level of RAID fault tolerance. It allocates two sets of parity data across drives and allows simultaneous write operations. This level of fault tolerance can withstand two simultaneous drive failures without downtime or data loss. Data Migration and DtS Technology The Smart Array architecture provides a quick and easy way to migrate from the Smart Array Cluster Storage to the Modular SAN Array 1000 (MSA1000). In order to convert the Smart Array Cluster Storage to a SAN, simply remove the Smart Array Cluster Controller(s) and replace them with StorageWorks MSA1000 Controller(s) and add FC I/O board or FC Switch (please refer to MSA1000 Quickspecs for additional SAN requirements information). This is referred to as DtS technology (DAS-to-SAN technology). In addition to convertibility to the SAN, the Smart Array Cluster Storage allows the seamless migration of stored data in ProLiant servers protected by Smart Array PCI controllers to a Smart Array Cluster Storage system. Data that is currently stored on 1 Universal disk drives using Compaq Smart Array controllers, as well as data on an RA4100 can easily be migrated to the Smart Array Cluster Storage. Simply remove the drives from the older systems and insert them into the Smart Array Cluster Storage. Existing data and configuration will remain intact. In addition, the RAID set and data will be preserved allowing migration to be completed in minutes, not hours. DA Canada Version 4 June 25,

3 Standard Features S MART A RRAY C LUSTER S TORAGE H IGHLIGHTS (continued) Low Total Cost of Ownership The modular, scalable design of the Smart Array Cluster Storage provides an extremely flexible platform. You can buy what you need today and purchase additional capacity and performance as your data storage needs grow, instead of making a large up-front investment. Additional drives, controllers, cache can be easily added as your needs dictate. Universal Hard Drive Since the Smart Array Cluster Storage supports Universal 1 Ultra2 and Ultra3 drives, your investment in SCSI technology is protected and cost is minimized as you add new drives. Sharing of a common universal drive form factor between your server and storage can significantly reduce needs for hardware and spare inventory, and offer overall reduction in storage management and business costs. Pre-Failure Warranty Drives installed in a Smart Array Cluster Storage and monitored under Compaq Insight Manager are supported by a Pre- Failure (replacement) Warranty. Note: Pre-Failure Warranty allows for the replacement of designated drives in Smart Array Cluster Storage before they actually fail when using Compaq Insight Manger on Compaq servers. Note: Some operating systems may not support all of these features. Integrated Configuration and Management Tools The Smart Array Cluster Storage utilizes a standard, integrated set of management and utility software. These tools consistently lower the cost of ownership by reducing training and technical expertise necessary to install and maintain Compaq storage. S MART A RRAY C LUSTER S TORAGE C OMPONENTS With the following components, your storage capacity and performance can be scaled to new levels: Smart Array Cluster Storage The 4U array houses up to fourteen 1 Universal hot pluggable Ultra2 and/or Ultra3 Compaq drives. Each Smart Array Cluster Storage includes the following standard components: Smart Array Cluster Storage Controller, 2-port Ultra3 SCSI I/O Module, dual hot pluggable fans/power supplies, two power cables, two VHDCI SCSI cables and a crossover Ethernet cable. Smart Array Cluster Storage Controller The Smart Array Cluster Storage Controller is an integrated RAID controller with an integrated LCD/LED status display and 128-MB read/write batterybacked cache (expandable to 512MB per controller). One Smart Array Cluster Storage Controller is included with the Smart Array Cluster Storage; the redundant Smart Array Cluster Storage Controller is an option. DA Canada Version 4 June 25,

4 Standard Features S MART A RRAY C LUSTER S TORAGE C OMPONENTS (continued) Key Features Redundant controller optional. Standard 128-MB Battery Backed Cache, upgradeable to 512 MB maximum. RAID 0, 1, 1+0, 5 and ADG. Redundant Power Supplies and Fans. 4U Chassis supports up to 14 Compaq Hot Plug Universal Hard Drives. Host based configuration via ACU. Remote configuration and monitoring via ACU XE (offline and remote) & Compaq Insight Manager 7. Smart Array Cluster Storage Controller Management Features Online RAID Level Migration: allows for online post-configuration change to RAID level without destroying data or volume information. Online Capacity Expansion: lets you add storage to an operational Smart Array Cluster Storage reducing expensive server downtime. Online Volume Extension: allows for the capacity growth of existing logical volumes. Global Online Spare: reduces the risk of data loss by facilitating automatic rebuilds after a drive failure. Logical Drive Capacity Extension: allows the user to increase the size of existing logical drives online under Windows NT and offline for other operating systems. Online Stripe Size Migration: Allows to change stripe sizing of a logical drive. User Selectable Read/Write Cache size, dynamically allocate cache sizes. User Selectable Expand and Rebuild Priority. Controller Firmware Cloning Enhanced Controller Firmware Auto-Cloning: Allows customer choice of controller firmware cloning when adding new controller with higher firmware version, all done at the point of installation. When installing the redundant Smart Array Cluster Controller, the controller verifies the firmware version currently installed in the primary controller. If the firmware versions of the controllers do not match, then the customer may choose the following courses of action: 1. Upgrade to the highest firmware version 2. Downgrade to the lower firmware version, thus remaining with the current functioning version. Fault Tolerance Several fault tolerant configurations keep data available and servers running while drives are being replaced, include: Advanced Data Guarding (RAID ADG): Allocates the equivalence of 2 parity drives across multiple drives and allows simultaneous write operations. Distributed Data Guarding (RAID 5): Allocates parity data across multiple drives and allows simultaneous write operations. Drive Mirroring (RAID 1 and 1+0 Striped Mirroring): Allocates half of the drive array to data and the other half to mirrored data, providing two copies of every file. DA Canada Version 4 June 25,

5 Standard Features S MART A RRAY C LUSTER S TORAGE C OMPONENTS (continued) Smart Array Cluster Storage Controller Controller Cache Upgrade Cache on the Smart Array Cluster Controller may be upgraded to a maximum of 512 MB. Note: The Smart Array Cluster Controller allows the following cache configurations: 1 x 128 MB; 2 x 128 MB; 1 x 256 MB; 2 x 256 MB Note: When redundant controllers are installed, the cache configurations in both controllers must be identical. Fault Recovery Minimizes downtime, reconstructs data, and facilitates a quick recovery from drive failure. On-Line Spares: If a failure occurs, recovery begins with an on-line spare and data is reconstructed automatically. One on-line spare can be assigned per array and used across multiple arrays. It is also possible to assign different on-line spares across different arrays. Array Accelerator: Onboard, battery-backed cache memory protects data in the event of a power failure. In the unlikely event of a controller failure, the battery-backed cache will save critical user data for up to three days. SCSI I/O Module The I/O module on the Smart Array Cluster includes an integrated Environmental Monitoring Unit performs several functions including monitoring the enclosure functions, providing I/O connectors and signaling enclosure status. S OFTWARE C OMPONENTS The Smart Array Cluster Storage utilizes a single, consistent set of utility software for storage and RAID management, setup, configuration and troubleshooting. This consistency reduces the cost of ownership by reducing the training and technical expertise necessary to install and maintain your Compaq server storage solution. Configuration Array Configuration Utility (ACU) [On-line] Array Configuration Utility (ACU-XE) [On-line, Remote Web-Based & Off-line] Option ROM Configuration for Arrays (ORCA) Management/Health Compaq Insight Manager 7 Compaq Insight Manager (CIM) Array Configuration Utility (ACU-XE / ACU) Provides a graphical view of Compaq drive array configurations. Easy to use Wizards for configuration. ACU supports on-line configuration. Web Based ACU-XE supports On-Line, Remote Web Based and Off-line configuration. Runs online on Microsoft Windows NT 4.0 and Microsoft Windows Compaq Insight Manager 7 Powerful storage, server and server option management tool. Monitor storage from a remote central location. Browser based Compaq Insight Manager 7 provides full access from anywhere on the Intranet, eliminating the need for a dedicated Compaq Insight Manager management console. DA Canada Version 4 June 25,

6 Standard Features SOFTWARE COMPONENTS (continued) Microsoft Windows 2000 Advanced Server Microsoft Windows NT EE 4.0 Novell NetWare 5.1 Novell NetWare 6.0 Linux (Red Hat 7.2*, SuSE SLES 7*) *Clustering support from LifeKeeper for Linux version 4.1 by SteelEye Technology Inc Please refer to compatibility matrix for latest compatibility information Note: This Web site is available in English only. Warranty Three-year, on-site Limited Warranty for Smart Array Cluster Storage. Service & Support, CarePaq and Warranty Information Software Product Services Standalone telephone support Rights to new license version Media and documentation updates Hardware Product Services Installation services On-site maintenance (includes warranty support) Response time upgrades during the warranty period Post-warranty coverage RAID setup and performance consulting via statement of work Warranty Upgrade Options Response Upgrade on-site response from next business day to same day 4 hours Coverage Extend hours of coverage from 9 hours x 5 days to 24 hours x 7 days Duration Three-year, on-site Limited Warranty for Smart Array Cluster Storage, expandable to five years CarePaq Information CarePaq Description (U.S. Only) Part Number 6-3 Part Number 9x5, 4-Hour Response, On-Site Coverage, 3 years FM-FC4HR x7, 4-Hour Response, On-Site Coverage, 3 years FM-FC Hardware Installation FM-FCINS-IN CarePaq Description (Canada Only) Part Number 6-3 Part Number 9x5, 24x7 4-hour response on-site coverage - 3 years FP-FC4HR-36 N/A 24x7 4-hour response on-site coverage - 3 years FP-FC N/A Hardware Installation - on-site FP-FCINS-IN N/A CarePaq is defined as an upgrade to the product warranty attribute, available for a specific duration and hours of coverage. CarePaq is not available for less than the product s warranty duration. CarePaq is available for sale anytime during the warranty period for most products, but the commencement date will be the same as the Warranty Start Date (delivery date to end user customer). Proof of purchase may be required. CarePaq services are prepaid. For additional CarePaq (hardware & software) information, as well as orderable part numbers, please refer to the URL listed below: Note: This Web site is available in English only. DA Canada Version 4 June 25,

7 Technical Specifications S PECIFICATIONS Smart Array Cluster Storage LED Indicators on Front (3) LED Indicators for Drive Modules (3) Power Fault detected in one or more sub-systems Fault in Enclosure Management Drive Access (centre) Online (left) Drive Failure (right) LED Indicators on Rear Panel (4) Power Supply/Blower Assembly Fault (1) Interface Maximum Number of Drives EMU (3): Power; A bus; B bus Ultra3 SCSI to Hard Drives Ultra3 SCSI to Host Servers Fourteen, 1-inch Compaq Ultra2 or Ultra 3 Universal Hard Drives (Smart Array Cluster Storage Cabinet) Temperature Range Operating 50 to 95 F/10 to 35 C Shipping -2 to 122 F/-0 to 50 C Note: Rated 1 C per 1000 feet of elevation to ft. Relative Humidity Operating 10% to 90% Non-operating Up to 95% Input Power Requirements Rated Input Voltage 100 to 240 VAC Heat Dissipation (maximum) Smart Array Cluster Storage Cabinet Rated Input Frequency Rated Input Current 50 to 60 Hz 6 A Max Input Power (max) 549 W* 1876 Btu/hr* * Input Power and Heat Dissipation specifications are maximum values and apply to worst-case conditions at full rated power supply load. The power/heat dissipation for your installation will vary depending on the equipment configuration. 4U Rack Form Factor Dimensions (H x W x D) Weight 6.9 x 19 x 20.5 in/17.5 x 48.3 x 52.1 cm Net 55 to 85 lb/24.95 to kg Shipping Packaging Dimensions (L x W x D) 28.5 x x in/72.4 x 37.6 x 84.1 cm Weight Gross 75 to 105 lb/34.02 to kg DA Canada Version 4 June 25,

8 Technical Specifications S PECIFICATIONS (continued) Smart Array Cluster Storage Controller User Interface Electrical Interface Protocol Support SCSI Ports Drives Supported Maximum Capacity Logical Drives RAID Support Cache Memory Cache Batteries Upgradeable Firmware Disk Drive and Enclosure Protocol Support Controller Display with Status Indicators (2) and Push Buttons (4) Status Indicators on front of Controller (16) LVD (Low Voltage Differential) Wide Ultra3 SCSI (160 MB/s per channel) 2 external VHDCI connectors Up to 14 drives 1.0 TB (14 drives x 72GB) Up to 32 logical drives RAID ADG (Advanced Data Guarding) RAID 5 (Distributed Data Guarding) RAID 1+0 (Striping & Mirroring) RAID 1 (Mirroring) RAID 0 (Striping) Standard 128 MB Read/Write Cache Up to 512 MB Read/Write ECC protection, battery-backed, and removable Note: The Smart Array Cluster Controller allows the following cache configurations: 1 x 128 MB; 2 x 128 MB; 1 x 256 MB; 2 x 256 MB. Note: When redundant controllers are installed, the cache configurations in both controllers must be identical. Up to three days of redundant battery life, removable for easy replacement 2 MB flashable ROM Compaq Ultra3 and Ultra2 SCSI 1-inch Universal drives Packaging Dimensions (L x W x D) 17 x 12.5 x 7.75 in/43.2 x x 19.7 cm SCSI I/O Module Connector Type Ports Bandwidth Protocols Supported Weight Ultra3 SCSI 2 VHDCI; Ultra3 SCSI 160 MB/s Ultra3 SCSI and Ultra2 SCSI Gross 6 lb/2.72 kg Packaging Dimensions (L x W x D) 17 x 12.5 x 7.75 inch/43.2 x x 19.7 cm Weight Gross 6 lb/2.72 kg DA Canada Version 4 June 25,

9 Configuration Information C ONFIGURATION I NFORMATION S TEP 1 ORDER R EQUIRED I TEMS B21 Package Contents 4U Smart Array Cluster Storage Smart Array Cluster Storage Controller with 128 MB cache 2-port SCSI I/O Module Redundant Hot Pluggable Power Supply/blower assemblies Smart Array Cluster Storage Rack Mounting Kit Smart Array Cluster Storage Support CD Power cables (2) VHDCI SCSI cables 6 each (2) Crossover Ethernet cable for clustering User Manual S TEP 2 CHOOSE S MART A RRAY C LUSTER S TORAGE S YSTEM O PTIONS Smart Array Cluster Storage Controller (Optional) B21 128MB Battery Backed Cache Module (Battery Backed) B21 256MB Battery Backed Cache Module B21 48 Volt Power Supply for Smart Array Cluster Storage B21 Note: The Smart Array Cluster Controller allows the following cache configurations: 1 x 128 MB; 2 x 128 MB; 1 x 256 MB; 2 x 256 MB Note: When redundant controllers are installed, the cache configurations in both controllers must be identical. S TEP 3 CHOOSE P ROL IANT S ERVER Server Compatibility ML330 G2 ATA Models (Direct Attached configurations only) ML330 G2 SCSI Models (Direct Attached configurations only) ML350 G2 (Direct Attached configurations only) ML370 G2 (Clustering, Direct Attached) DL360 G2 (Clustering, Direct Attached) DL380 G2 (Clustering, Direct Attached) DL580 (Clustering, Direct Attached) DL760 (Clustering, Direct Attached) DA Canada Version 4 June 25,

10 Configuration Information C ONFIGURATION I NFORMATION (continued) S TEP 4 CHOOSE H OST C ONNECTIVITY Required for ML330 G2, ML350 G2, DL360 G2, DL580, D L760 Smart Array 532 Controller Option Kit B21 Required for ML370 Generation 2 Smart Array 532 Controller B21 (G2) Smart Array 5i Controller Option Kit B21 Smart Array 5i Plus Controller & Battery Backed Write Cache (BBWC) Enabler Bundle B21 Note: Either one Smart Array 532 Controller or one Smart Array 5i or Smart 5i Plus Controller Option Kit is required. Required for DL380 Generation 2 (G2) Smart Array 5i Plus Controller & BBWC Enabler Bundle B21 *Note: The Smart Array 5i controller is included with the ProLiant DL380 G2. Host connectivity through the embedded Smart Array 5i controller. S TEP 5 CHOOSE H ARD D RIVES Pluggable, Universal Hard Drives 36.4-GB Wide Ultra3 SCSI 15,000 rpm Drive (1 ) B GB Wide Ultra3 SCSI 15,000 rpm Drive (1 ) B GB Wide Ultra3 SCSI 10,000 rpm Drive (1 ) B GB Wide Ultra3 SCSI 10,000 rpm Drive (1 ) B GB Wide Ultra3 SCSI 10,000 rpm Drive (1 ) B22 Note: For complete compatibility information, refer to the Compaq SCSI Hard Drive Compatibility table located at Note: This Web site is available in English only. S TEP 6 CHOOSE T APE B ACKUP D RIVE Compaq Universal Hot Plug AIT AIT 35 GB Hot Plug LVD Tape Drive (Carbon) B21 and DAT Tape Drives AIT 50 GB Hot Plug LVD Tape Drive (Carbon) B21 AIT 100 GB Hot Plug LVD Tape Drive (Carbon) B21 DAT 20/40 GB Hot Plug Tape Drive (Carbon) B21 S TEP 7 CHOOSE R ACK O PTIONS Note: When using Hot Plug tape drives in the Smart Array Cluster Storage system in a cluster configuration, use VERITAS backup software only. Compaq Rack Series Compaq Rack (42U) Rack Cabinet - Pallet (Graphite) B21 (Carbon) Compaq Rack (42U) Rack Cabinet - Shock Pallet (Graphite) B22 Compaq Rack (47U) Pallet (Graphite) B21 Compaq Rack (47U) - Crated (Graphite) B22 Compaq Rack (42U) Pallet B21 Compaq Rack (42U) Shock Pallet B22 Compaq Rack (42U) Crated B23 Compaq Rack (36U) - Pallet (Graphite) B21 Compaq Rack (36U) - Shock Pallet (Graphite) B22 Compaq Rack (36U) - Crate (Graphite) B23 Compaq Rack (22U) Pallet B21 Compaq Rack (22U) Shock Pallet B22 Compaq Rack (22U) Crated B23 Note: -B21 (pallet) used to ship empty racks shipped on a truck -B22 (shock pallet) used to ship racks with equipment installed (by custom systems, ARs and Channels) -B23 (crated) used for air shipments of empty racks DA Canada Version 4 June 25,

11 Configuration Information C ONFIGURATION I NFORMATION (continued) S TEP 7 CHOOSE R ACK O PTIONS (continued) Rack Options for Compaq Rack Compaq Rack 9142 (42U) Pallet B Series Compaq Rack 9142 (42U) Shock Pallet B22 Compaq Rack 9142 (42U) Crated B23 Compaq Rack 9136 (36U) Pallet B21 Compaq Rack 9136 (36U) Shock Pallet B22 Compaq Rack 9136 (36U) Crated B23 Compaq Rack 9122 (22U) Pallet B21 Compaq Rack 9122 (22U) Shock Pallet B22 Compaq Rack 9122 (22U) Crated B23 Compaq Rack 9842 (800mm wide, 42U) - Pallet B21 Note: -B21 (pallet) used to ship empty racks shipped on a truck -B22 (shock pallet) used to ship racks with equipment installed (by custom systems, VARs and Channels) -B23 (crated) used for air shipments of empty racks Rack Options for Compaq Rack Rack Blanking Panels Graphite (Multi) B Series Rack Blanking Panels Graphite (1U) B21 Note: The Rack Blanking Panels (PN B21) contains 10 each of (1U) Rack Blanking Panels Graphite (2U) B22 Note: The Rack Blanking Panels (PN B21) contains 10 each of (2U) Rack Blanking Panels Graphite (3U) B23 Note: The Rack Blanking Panels (PN B21) contains 10 each of (3U) Rack Blanking Panels Graphite (4U) B24 Note: The Rack Blanking Panels (PN B21) contains 10 each of (4U) Rack Blanking Panels Graphite (5U) B25 Note: The Rack Blanking Panels (PN B21) contains 10 each of (5U) 600mm Stabilizer Kit Graphite B21 Baying Kit for Rack series (Carbon) B21 42U Side Panel Graphite Metallic B21 110V Fan Kit (Graphite) B21 220V Fan Kit (Graphite) B mm Wide Stabilizer Kit B21 Note: The 800 mm wide Stabilizer Kit (PN B21) is to be used only with the rack. DA Canada Version 4 June 25,

12 Configuration Information C ONFIGURATION I NFORMATION (continued) S TEP 7 CHOOSE R ACK O PTIONS (continued) SAN Conversion Options MSA1000 Controller B21 MSA Fibre Channel I/O Module B21 MSA Fabric Switch B21 FCA2101 Host Adapter B21 2Gb/s SFP SW Transceiver Kit B21 StorageWorks Enclosure Model 4314R (rack-mountable) Note: The MSA1000 controller and the MSA Fibre Channel I/O module (or the MSA Fabric Switch 6) are required for conversion. To obtain conversion procedure document go to and download Converting Smart Array Cluster Storage to Modular SAN Array 1000 document. Note: This Web site is available in English only Compaq Canada Corporation. All rights reserved. Printed in Canada. Compaq, the Compaq logo, Compaq Insight Manager, CarePaq and ProLiant are trademarks or registered trademarks of Compaq Information Technologies Group, L.P. in the U.S. and/or other countries. VERITAS is a registered trademark or trademark of VERITAS Software Corporation in the U.S. and/or other countries. Microsoft and Windows NT are registered trademarks or trademarks of Microsoft Corporation in the U.S. and/or other countries. Novell and NetWare are registered trademarks or trademarks of Novell, Inc. SuSE and its logo are registered trademarks or trademarks of SuSE AG. Linux is a registered trademark or trademark of Linus Torvalds in the U.S. and/or other countries. RedHat is a registered trademark or trademark of RedHat Inc., in the U.S. and/or other countries. All other product names mentioned herein may be trademarks of their respective companies. Compaq shall not be liable for technical or editorial errors or omissions contained herein. The information is provided as is without warranty of any kind and is subject to change without notice. The warranties for Compaq products are set forth in the express limited warranty statements accompanying such products. Nothing herein should be construed as constituting an additional warranty. DA Canada Version 4 June 25,