PHS Metallized polypropylene film capacitor MKP - Switching / Snubber - High current Up to 6 x leads execution

Size: px
Start display at page:

Download "PHS Metallized polypropylene film capacitor MKP - Switching / Snubber - High current Up to 6 x leads execution"

Transcription

1 Main applications Snubber, energy conversion and control in power semiconductor circuits, resonant circuits, industrial and motor speed controls, SMPS, induction heaters, high voltage, high current and mediumhigh pulse applications Dielectric Polypropylene Electrodes Vacuum deposited metal layers Coating Solvent resistant plastic case with resin sealing (UL 94 V-0). Flame retardant execution Construction Extended metallized film with internal series connection (refer to general technical information) Terminals Tinned copper wire (lead-free). 2 x terminals (S=5±1mm, L=25±5mm terminals length), 4 x terminals (SD=5,5±1,5mm) or 6 x terminals (ST=5,5±1,5mm) execution Degree of protection IP00 Installation Whatever position assuring correct heat dissipation. Arrangement of many components with box walls in contact not admitted; suggested minimum distance between side by side elements 1/8 of the box thickness (B size) Reference standard IEC 61071, IEC 60068, RoHS compliant Climatic category 40/85/56 (IEC 60068/1), GPD (DIN40040) Operating temperature range (case) C (+100 C observing voltage and current de-rating) Max. permissible ambient temperature +70 C, operation at rated power, current, voltage and natural cooling (+85 C observing voltage and current de-rating) Rated capacitance (Cr) 0,0068µF to 9µF. Refer to article table Capacitance tolerance (at 1kHz) ±10% (code=k), ±5% (code=j) and ±20% (code=m). Other tolerances upon request Capacitance temperature coefficient Refer to graphs in general technical information Long term stability (at 1 khz) Capacitance variation ±1% after a period of 2 years at standard environmental conditions Rated voltage (Ur) 700, 850, 1000, 1200, 1500, 2000, 2500, 3000 Vdc (+85 C) Temperature de-rated voltage For operating temperature (case)>+85 C, Ur must be decreased 1,5% for every C exceeding +85 C, Urms must be decreased 2,5% for every C exceeding +85 C Non recurrent surge voltage (Upk) 1100, 1300, 1550, 1750, 2200, 2600, 3300, 4000 Vdc (+85 C) Self inductance 1nH/mm of capacitor pitch Maximum pulse rise time Refer to article table Maximum peak current (Ipeak) Refer to article table. Max. non repetitive Ipk = 1,5 x Ipeak Dissipation factor (DF), max. Tgδ x10-4, measured at 25±5 C, 1kHz Cr 1μF Cr > 1μF 5 6 Insulation resistance (IR) 30000s but need not exceed 30GΩ (typical value), after 1 minute of electrification at 100Vdc (25 ± 5 C) Test voltage between terminals (Ut) 1,6xUr (DC) applied for 10s / 2xUr (DC) applied for 2s, at 25±5 C Test voltage between terminals and case (Utc) 3kV 50 60Hz applied for 60s at 25±5 C Damp heat test (steady state) Test conditions: Temperature= +40±2 C Relative humidity=93±2% Test duration= 56 days Performance: Capacitance change ±2% DF change at 1kHz IR 50% of initial limit value Typical capacitance change versus operating time -3% after hours at Urms or after hours at Ur Life expectancy (Ur); hours (Urms) Failure quota 300/10 9 component hours Resistance to soldering heat test Test conditions: Solder bath temperature= +260±5 C Dipping time (with heat screen)= 10±1s Performance: Capacitance change ±1% DF change at 1kHz IR 50% of initial limit value Warning This specification must be completed with the data given in the General technical information chapter Ed.02 Rev

2 PHS article table (different values available upon request) ICEL Code , ,5 0,8 22, ,5 4,5 10,5 PHS *G# ,22 8, ,5 0,8 22, ,3 PHS *G# , ,8 27, ,8 PHS *H# , ,5 0,8 22, ,5 7 6,3 PHS *G# , ,8 27, PHS *H# , ,5 0,8 22, ,5 8 5,1 PHS *G# , , ,5 5,7 PHS *H# , , , ,5 4,9 PHS *H# ,2 27, ,5 3,9 PHS *H# ,2 27,5 5, ,5 3,2 PHS *HSD , ,2 27, ,3 PHS *H# , ,2 27,5 10, ,5 2,6 PHS *HSD , ,5 1,2 37, ,1 PHS *J# , ,5 1,2 37, ,7 PHS *J# , ,5 1,2 37,5 10, PHS *JSD , ,5 42,5 1,2 37, ,4 PHS *J# , ,5 42,5 1,2 37,5 10, ,5 2,7 PHS *JSD ,5 1,2 37, ,3 PHS *J# ,5 1,2 37,5 10, ,6 PHS *JSD , ,5 1,2 37, ,2 PHS *J# , ,5 1,2 37,5 10, ,5 2,5 PHS *JSD , ,5 1,2 37, ,9 PHS *J# , ,5 1,2 37,5 20, ,5 2,2 PHS *JSD , ,5 1,2 37, ,5 PHS *J# , ,5 1,2 37,5 20, ,8 PHS *JSD , ,5 1,2 37,5 10, ,7 PHS *JST ,5 1,2 37, ,5 PHS *J# ,5 1,2 37,5 20, ,8 PHS *JSD ,5 1,2 37,5 10, ,7 PHS *JST , ,5 1,2 52, PHS *R# , ,5 1,2 52,5 20, ,3 PHS *RSD ,5 1,2 52, ,6 PHS *R# ,5 1,2 52,5 20, ,9 PHS *RSD ,5 1,2 52,5 10, ,8 PHS *RST Ed.02 Rev

3 ICEL Code , ,5 0,8 22, ,5 4 12,8 PHS *G# , ,8 27, PHS *H# , ,5 26,5 0,8 22, ,2 5 9,7 PHS *G# , ,8 27, ,5 10,7 PHS *H# , ,5 0,8 22, ,5 7 7,6 PHS *G# , ,8 27, ,5 8,3 PHS *H# , , ,3 PHS *H# , , , ,5 5,1 PHS *H# , ,2 27, ,8 PHS *H# , ,2 27,5 5, ,1 PHS *HSD ,2 27, ,1 PHS *H# ,2 27,5 10, ,4 PHS *HSD ,5 1,2 37, ,9 PHS *J# , ,5 1,2 37, ,4 PHS *J# , ,5 1,2 37,5 10, ,5 2,7 PHS *JSD ,5 1,2 37, ,9 PHS *J# ,5 1,2 37,5 10, ,5 2,2 PHS *JSD , ,5 1,2 37, ,9 PHS *J# , ,5 1,2 37,5 10, ,5 2,2 PHS *JSD , ,5 1,2 37, ,7 PHS *J# , ,5 1,2 37,5 20, ,5 2 PHS *JSD ,5 1,2 37, ,4 PHS *J# ,5 1,2 37,5 20, ,8 PHS *JSD ,5 1,2 37,5 10, ,5 1,7 PHS *JST , ,5 1,2 37, ,4 PHS *J# , ,5 1,2 37,5 20, ,8 PHS *JSD , ,5 1,2 37,5 10, ,7 PHS *JST ,5 1,2 52, ,2 PHS *R# ,5 1,2 52,5 20, ,5 2,5 PHS *RSD , ,5 1,2 52, ,8 PHS *R# , ,5 1,2 52,5 20, ,1 PHS *RSD , ,5 1,2 52, ,6 PHS *R# , ,5 1,2 52,5 20, ,9 PHS *RSD , ,5 1,2 52,5 10, ,5 1,8 PHS *RST ,5 1,2 52, ,5 PHS *R# ,5 1,2 52,5 20, ,8 PHS *RSD ,5 1,2 52,5 10, ,7 PHS *RST , ,5 0,8 22, ,9 3,5 16,5 PHS *G# ,1 8, ,5 0,8 22, ,5 4,5 12,4 PHS *G# , ,5 0,8 22, ,7 5,5 9,2 PHS *G# , ,8 27, ,8 7 7,5 PHS *H# , , , ,7 PHS *H# , ,2 27, ,7 PHS *H# , ,2 27,5 10, ,5 3 PHS *HSD , ,5 1,2 37, ,7 PHS *J# ,5 1,2 37, ,9 PHS *J# , ,5 1,2 37, ,2 PHS *J# , ,5 1,2 37,5 10, ,5 2,5 PHS *JSD , ,5 1,2 37, ,9 PHS *J# , ,5 1,2 37,5 20, ,5 2,2 PHS *JSD , ,5 1,2 37, ,6 PHS *J# , ,5 1,2 37,5 20, ,9 PHS *JSD , ,5 1,2 52, PHS *R# , ,5 1,2 52,5 20, ,3 PHS *RSD , ,5 1,2 52,5 10, ,5 2,2 PHS *RST , ,5 1,2 52, ,6 PHS *R# , ,5 1,2 52,5 20, ,9 PHS *RSD , ,5 1,2 52,5 10, ,5 1,8 PHS *RST , ,5 0,8 22, ,7 3 20,5 PHS *G# ,068 8, ,5 0,8 22, ,5 15,7 PHS *G# , ,5 26,5 0,8 22, ,5 4,5 12 PHS *G# , ,8 27, ,5 13,5 PHS *H# , ,8 22, ,7 6,5 8,7 PHS *G# , ,8 27, ,5 6 9,8 PHS *H# , , ,8 7,5 7 PHS *H# , ,2 27, ,7 11,5 5,2 PHS *H# , ,2 27,5 5, ,7 14 4,5 PHS *HSD , ,2 27, ,3 14 3,7 PHS *H# , ,2 27,5 5, ,3 16,5 3 PHS *HSD , ,5 1,2 37, ,8 11,5 5,4 PHS *J# Ed.02 Rev

4 ICEL Code , ,2 27, , PHS *H# , ,2 27,5 10, ,2 20,5 2,3 PHS *HSD , ,5 1,2 37, ,4 13 4,7 PHS *J# ,5 1,2 37, PHS *J# ,5 1,2 37,5 10, ,3 PHS *JSD , ,5 1,2 37, ,6 PHS *J# , ,5 1,2 37,5 20, ,9 PHS *JSD , ,5 1,2 37, ,5 14 3,2 PHS *J# , ,5 1,2 37,5 20, ,5 23 2,5 PHS *JSD ,5 1,2 37, ,6 PHS *J# ,5 1,2 37,5 20, ,9 PHS *JSD , ,5 1,2 52, ,4 PHS *R# , ,5 1,2 52,5 20, ,5 2,7 PHS *RSD , ,5 1,2 52, ,2 PHS *R# , ,5 1,2 52,5 20, ,5 PHS *RSD ,5 1,2 52, ,8 PHS *R# ,5 1,2 52,5 20, ,1 PHS *RSD ,5 1,2 52,5 10, PHS *RST , ,5 1,2 52, ,8 PHS *R# , ,5 1,2 52,5 20, ,1 PHS *RSD , ,5 1,2 52,5 10, ,5 2 PHS *RST , ,5 0,8 22, ,1 2,5 26 PHS *G# ,047 8, ,5 0,8 22, ,7 3,5 19,5 PHS *G# , ,5 0,8 22, ,5 4,5 14,5 PHS *G# , ,8 27, , PHS *H# , ,5 0,8 22, ,5 10,8 PHS *G# , ,8 27, ,5 11,9 PHS *H# , ,8 27, , PHS *H# , , , ,5 7 8,7 PHS *H# , ,2 27, ,7 13 4,7 PHS *H# , ,2 27,5 5, , PHS *HSD , ,5 1,2 37, ,6 10,5 6,2 PHS *J# , ,5 1,2 37, ,4 12,5 5,1 PHS *J# , ,5 1,2 37, ,6 14 4,4 PHS *J# , ,5 1,2 37,5 10, ,6 17,5 3,7 PHS *JSD , ,5 1,2 37, ,4 14 3,6 PHS *J# , ,5 1,2 37,5 20, ,4 20,5 2,9 PHS *JSD ,5 1,2 37, ,3 PHS *J# ,5 1,2 37,5 20, ,5 2,6 PHS *JSD , ,5 1,2 37, ,8 PHS *J# , ,5 1,2 37,5 20, ,5 2,1 PHS *JSD , ,5 1,2 52, ,5 14 3,8 PHS *R# , ,5 1,2 52,5 20, ,5 23,5 3,1 PHS *RSD ,5 1,2 52, ,3 PHS *R# ,5 1,2 52,5 20, ,6 PHS *RSD ,5 1,2 52,5 10, ,5 PHS *RST , ,5 1,2 52, ,3 PHS *R# , ,5 1,2 52,5 20, ,6 PHS *RSD , ,5 1,2 52,5 10, ,5 2,5 PHS *RST , ,5 0,8 22, , PHS *G# ,022 8, ,5 0,8 22, ,8 2,5 33 PHS *G# , ,5 26,5 0,8 22, ,7 3 24,5 PHS *G# , ,8 27, , PHS *H# , ,5 0,8 22, ,1 4 18,4 PHS *G# , ,8 27, , PHS *H# , ,8 27, ,2 5 14,8 PHS *H# , ,5 32 0,8 27, ,5 11,2 PHS *H# , , ,5 10 7,8 PHS *H# , ,2 27, ,6 PHS *H# , ,2 27,5 5, ,9 PHS *HSD , ,5 1,2 37, ,2 9,5 7,2 PHS *J# , ,2 27, ,5 14 4,5 PHS *H# , ,2 27,5 10, ,5 16 3,8 PHS *HSD , ,5 1,2 37, ,3 12 5,5 PHS *J# , ,5 1,2 37, ,7 14 4,5 PHS *J# , ,5 1,2 37,5 10, ,7 17,5 3,8 PHS *JSD , ,5 1,2 37, ,6 14 4,1 PHS *J# , ,5 1,2 37,5 20, ,6 18,5 3,4 PHS *JSD , ,5 1,2 37, ,8 14 3,7 PHS *J# , ,5 1,2 37,5 20, ,8 21,5 3 PHS *JSD Ed.02 Rev

5 ICEL Code , ,5 1,2 37, ,2 14 3,4 PHS *J# , ,5 1,2 37,5 20, ,2 22,5 2,7 PHS *JSD ,5 1,2 52, ,3 PHS *R# ,5 1,2 52,5 20, ,6 PHS *RSD , ,5 1,2 52, ,5 14 3,5 PHS *R# , ,5 1,2 52,5 20, ,5 26 2,8 PHS *RSD , ,5 0,8 22, ,5 1,5 58 PHS *G# ,015 8, ,5 0,8 22, , PHS *G# , ,5 0,8 22, ,1 3 30,5 PHS *G# , ,8 27, ,1 2,5 37 PHS *H# , ,5 0,8 22, ,6 4 22,5 PHS *G# , ,8 27, ,7 3,5 25,7 PHS *H# , ,8 27, ,9 4,5 18,5 PHS *H# , ,5 32 0,8 27, ,2 5,5 14 PHS *H# , , ,4 PHS *H# , , ,4 10 8,4 PHS *H# , ,2 27, ,5 11,5 7,4 PHS *H# , ,5 1,2 37, ,5 8,5 9,1 PHS *J# , ,5 1,2 37, ,8 PHS *J# , ,5 1,2 37,5 10, ,5 6,1 PHS *JSD , ,5 1,2 37, ,5 14 5,2 PHS *J# , ,5 1,2 37,5 10, ,5 16 4,5 PHS *JSD , ,5 1,2 37, ,5 14 4,7 PHS *J# , ,5 1,2 37,5 20, , PHS *JSD , ,5 1,2 37, ,5 14 4,2 PHS *J# , ,5 1,2 37,5 20, ,5 20 3,5 PHS *JSD , ,5 1,2 52, ,4 14 4,6 PHS *R# , ,5 1,2 52,5 20, ,4 21 3,9 PHS *RSD ,5 1,2 52, ,7 PHS *R# ,5 1,2 52,5 20, ,5 3,0 PHS *RSD , ,5 0,8 22, ,2 1,5 75 PHS *G# , ,5 26,5 0,8 22, PHS *G# , ,8 27, PHS *H# , ,5 0,8 22, ,5 2,5 39 PHS *G# , ,8 27, ,5 43 PHS *H# , ,8 27, ,4 3,5 31 PHS *H# , ,5 32 0,8 27, ,6 4,5 21,6 PHS *H# , , ,4 7 15,8 PHS *H# , , ,6 8,5 11,7 PHS *H# , ,5 1,2 37, ,6 PHS *J# , ,5 1,2 37, ,5 9,5 PHS *J# , ,5 1,2 37, ,5 11,5 8 PHS *J# , ,5 1,2 37,5 10, ,5 13 7,3 PHS *JSD , ,5 1,2 37, PHS *J# , ,5 1,2 37,5 20, ,3 PHS *JSD , ,5 1,2 37, ,5 14 5,1 PHS *J# , ,5 1,2 37,5 20, ,5 18 4,4 PHS *JSD , ,5 1,2 52, , PHS *R# , ,5 1,2 52,5 20, ,3 18 5,3 PHS *RSD , ,5 1,2 52, ,9 14 5,4 PHS *R# , ,5 1,2 52,5 20, ,9 20,5 4,7 PHS *RSD , ,5 1,2 52, ,2 12 4,8 PHS *R# , ,5 1,2 52,5 20, ,2 22 4,1 PHS *RSD Warning: this specification must be completed with the data given in the General technical information chapter Ed.02 Rev

Metallized Polypropylene Film Capacitor AC Filtering Radial Type

Metallized Polypropylene Film Capacitor AC Filtering Radial Type Metallized Polypropylene Film Capacitor AC Filtering Radial Type FEATURES High peak current capabilities Long lifetime Material categorization: for definitions of compliance please see www.vishay.com/doc?9991

More information

Type 940C, Polypropylene Capacitors, for Pulse, Snubber High dv/dt for Snubber Applications

Type 940C, Polypropylene Capacitors, for Pulse, Snubber High dv/dt for Snubber Applications Type 94C, Polypropylene Capacitors, for Pulse, Snubber Type 94 round, axial leaded film capacitors have polypropylene film and dual metallized electrodes for both self healing properties and high peak

More information

AC and Pulse Film Foil Capacitors KP Radial Potted Type

AC and Pulse Film Foil Capacitors KP Radial Potted Type AC and Pulse Film Foil Capacitors KP Radial Potted Type 0.5 L max. W max. Marking H max. FEATURES 5 mm lead pitch, supplied loose in box taped in ammopack or reel Material categorization: for definitions

More information

Capacitance Cap. Tol. Suffix construction. Rated voltage

Capacitance Cap. Tol. Suffix construction. Rated voltage Metallized Polypropylene Film Capacitors Type:ECWFE Plastic Film Capacitors Non-inductive construction using metalized Polypropylene film with flame retardant plastic case. Features Small size Excellent

More information

Axial and Radial Leaded Multilayer Ceramic Capacitors for Automotive Applications Class 1 and Class 2, 50 V DC, 100 V DC and 200 V DC

Axial and Radial Leaded Multilayer Ceramic Capacitors for Automotive Applications Class 1 and Class 2, 50 V DC, 100 V DC and 200 V DC Axial and Radial Leaded Multilayer Ceramic Capacitors for Automotive Applications Class 1 and Class 2, 5 V DC, 1 V DC and 2 V DC DESIGNING For more than 2 years Vitramon has supported the automotive industry

More information

Electrical Specifications. Maximum Maximum Resistance Working Overload Temperature Voltage(1) Voltage Coefficient 400V 500V. Mechanical Specifications

Electrical Specifications. Maximum Maximum Resistance Working Overload Temperature Voltage(1) Voltage Coefficient 400V 500V. Mechanical Specifications Features: Thin Film Technology for precision and stability Excellent power to size ratio Exhibits good pulse power characteristics RoHS compliant / lead-free Type / Code Package Size Power Rating (Watts)

More information

Thick Film High Power Chip Resistors. Size W, W, /2W

Thick Film High Power Chip Resistors. Size W, W, /2W WF25P, WF20P, WF12P ±1%, ±5% 1Ω ~ 1MΩ Thick Film High Power Chip Resistors Size 2512 2W, 2010 1W, 1206 1/2W *Contents in this sheet are subject to change without prior notice. Page 1 of 7 ASC_WF25-20-12P_V10

More information

DATA SHEET. SURFACE-MOUNT CERAMIC MULTILAYER CAPACITORS General Purpose & High Capacitance Class 2, X7R. Product Specification February 27, 2013 V.

DATA SHEET. SURFACE-MOUNT CERAMIC MULTILAYER CAPACITORS General Purpose & High Capacitance Class 2, X7R. Product Specification February 27, 2013 V. Product Specification February 27, 13 V.9 DATA SHEET SURFACE-MOUNT CERAMIC MULTILAYER CAPACITORS General Purpose & High Capacitance Class 2, 6.3 V TO 50 V 100 pf to 22 µf RoHS compliant & Halogen Free

More information

High-ohmic/high-voltage resistors

High-ohmic/high-voltage resistors FEATURES These resistors meet the safety requirements of: UL1676 (range 510 kω to 11 MΩ) EN60065 BS60065 (U.K.) NFC 92-130 (France) VDE 0860 (Germany) High pulse loading capability Small size. APPLICATIONS

More information

Metallized Polypropylene Film Capacitors DC-Link Capacitor

Metallized Polypropylene Film Capacitors DC-Link Capacitor Metallized Polypropylene Film Capacitors DC-Link Capacitor FEATURES Slim line, low building height Very long useful life time: Up to 100 000 h at U NDC and 70 C High ripple current capability, low ESR,

More information

High-ohmic/high-voltage resistors

High-ohmic/high-voltage resistors FEATURES High pulse loading capability Small size. APPLICATIONS Where high resistance, high stability and high reliability at high voltage are required High humidity environment White goods Power supplies.

More information

WW12X, WW08X, WW06X, WW04X ±1%, ±5% Thick Film Low ohm chip resistors

WW12X, WW08X, WW06X, WW04X ±1%, ±5% Thick Film Low ohm chip resistors WW12X, WW08X, WW06X, WW04X ±1%, ±5% Thick Film Low ohm chip resistors Size 1206, 0805, 0603, 0402 *Contents in this sheet are subject to change without prior notice. Page 1 of 8 ASC_WWxxX_V12 Nov.- 2011

More information

High Voltage Surge Metal Glaze Leaded Resistor

High Voltage Surge Metal Glaze Leaded Resistor High Voltage Surge Metal Glaze A metal glazed film is deposited on a high grade ceramic body. After that caps are applied to the rods and tinned electrolytic copper wires are welded to these end caps.

More information

General information. Please refer to our Internet address (http://www.kemet.com) for updated information on KEMET products, services and news.

General information. Please refer to our Internet address (http://www.kemet.com) for updated information on KEMET products, services and news. DC Film Capacitors Please refer to our Internet address (http://www.kemet.com) for updated information on KEMET products, services and news. Contents Pitch Rated Voltage Capacitance Page mm Vdc range range

More information

AC Line Rated Ceramic Disc Capacitors Class X1, 760 V AC, Class Y1, 500 V AC

AC Line Rated Ceramic Disc Capacitors Class X1, 760 V AC, Class Y1, 500 V AC AC Line Rated Ceramic Disc Capacitors Class X1, 760 V AC, Class Y1, 500 V AC QUICK REFERENCE DATA DESCRIPTION VALUE Ceramic Class 1 2 Ceramic Dielectric U2J U2J Y5S, Y5U Y5S, Y5U Voltage (V AC ) 500 760

More information

50 W Power Resistor, Thick Film Technology, TO-220

50 W Power Resistor, Thick Film Technology, TO-220 50 W Power Resistor, Thick Film Technology, TO-220 FEATURES 50 W at 25 C heatsink mounted Adjusted by sand trimming Leaded or surface mount versions High power to size ratio Non inductive element Material

More information

DC Film Capacitors MKT Axial Type

DC Film Capacitors MKT Axial Type MKT181 DC Film Capacitors MKT Axial Type FEATURES Supplied loose in box, taped on ammopack or reel Material categorization: For definitions of compliance please see www.vishay.com/doc?9991 APPLICATIONS

More information

Application Guide Film Capacitors

Application Guide Film Capacitors Capacitance Change vs. Temperature Insulation Resistance vs. Temperature Polyester Typical Characteristics at 1 khz % Capacitance Change % Capacitance Change Polypropylene Typical Characteristics at 1

More information

High Ohmic/High Voltage Metal Glaze Leaded Resistors

High Ohmic/High Voltage Metal Glaze Leaded Resistors VR37 High Ohmic/High Voltage FEATURES A metal glazed film is deposited on a high grade ceramic body. After a helical groove has been cut in the resistive layer, tinned electrolytic copper wires are welded

More information

DC Film Capacitors MKT Radial Potted Type

DC Film Capacitors MKT Radial Potted Type DC Film Capacitors MKT Radial Potted Type FEATURES 15 mm to 27.5 mm lead pitch. Supplied loose in box and taped on reel Material categorization: for definitions of compliance please see www.vishay.com/doc?99912

More information

Metallized polyester film capacitors MKT 370/371/372/373

Metallized polyester film capacitors MKT 370/371/372/373 Metallized polyester film capacitors MKT 370/37/372/373 MKT RADIAL POTTED CAPACITORS PITCH /7.///22./27. mm 2222 370 2222 37 2222 372 2222 373 CBA Fig. Simplified outlines. FEATURES Low-inductive wound

More information

Capacitors for AC and DC General Purpose Applications

Capacitors for AC and DC General Purpose Applications GTC 003 2010 Capacitors for AC and DC General Purpose Applications Proven EIA-456 Compliant 60,000 Hour Reliability Industry Standard Just Capacitors GTC 944 Clint Moore Road, Boca Raton, Florida 33487

More information

Low Voltage Capacitor LVCP. The new choice for Power Factor Correction

Low Voltage Capacitor LVCP. The new choice for Power Factor Correction Low Voltage Capacitor LVCP The new choice for Power Factor Correction LVCP : the new choice for Power Factor Correction The LVCP is a compact and powerful capacitor. It offers high modularity, unmatched

More information

DATA SHEET THICK FILM CHIP RESISTORS Introduction

DATA SHEET THICK FILM CHIP RESISTORS Introduction DATA SHEET THICK FILM CHIP RESISTORS Introduction Product Specification Product specification 2 Chip Resistor Surface Mount Data in data sheets is presented - whenever possible -according to a 'format',

More information

Standard Metal Film Leaded Resistors

Standard Metal Film Leaded Resistors Standard Metal Film Leaded Resistors FEATURES Small size (SFR16S: 0204, SFR25 / SFR25H: 0207) Low noise (max. 1.5 μv/v for R > 1 M ) Compatible to both lead (Pb)-free and lead containing soldering processes

More information

Pulse Withstanding Thick Film Chip Resistor-SMDP Series. official distributor of

Pulse Withstanding Thick Film Chip Resistor-SMDP Series. official distributor of Product: Pulse Withstanding Thick Film Chip Resistor-SMDP Series Size: /// official distributor of Pulse Withstanding Thick Film Chip Resistor-SMDP Series 1. Scope -This specification applies to ~ sizes

More information

DC Film Capacitors MKT Radial Potted Type

DC Film Capacitors MKT Radial Potted Type DC Film Capacitors MKT Radial Potted Type MKT80 FEATURES AEC-Q00 qualified (rev. D) for PCM. mm (for larger available components on request) High temperature capabilities, up to 0 C Capacitance up to 60

More information

NMA 5V, 12V & 15V Series Isolated 1W Dual Output DC/DC Converters

NMA 5V, 12V & 15V Series Isolated 1W Dual Output DC/DC Converters www.murata-ps.com NMA 5V, 12V & 15V Series FEATURES RoHS compliant Efficiency up to 80% Power density up to 0.85W/cm 3 Wide temperature performance at full 1 Watt load, 40 C to 85 C Dual output from a

More information

High Voltage Surge Resistor

High Voltage Surge Resistor High Voltage Surge Resistor A metal glazed film is deposited on a high grade ceramic body. After that caps are applied to the rods and tinned electrolytic copper wires are welded to these end caps. The

More information

Interference Suppression Film Capacitors MKP Radial Potted Type

Interference Suppression Film Capacitors MKP Radial Potted Type Interference Suppression Film Capacitors MKP Radial Potted Type FEATURES 7.5 mm to 27.5 mm lead pitch Supplied loose in box, taped on reel Material categorization: For definitions of compliance please

More information

Lead (Pb)-free Commodity Thick Film Chip Resistors

Lead (Pb)-free Commodity Thick Film Chip Resistors Lead (Pb)-free Commodity Thick Film Chip Resistors FEATURES High volume product suitable for commercial applications Pure tin solder contacts on Ni barrier layer provides compatibility with lead (Pb)-free

More information

High Ohmic/High Voltage Metal Glaze Leaded Resistors

High Ohmic/High Voltage Metal Glaze Leaded Resistors High Ohmic/High Voltage Metal Glaze Leaded Resistors FEATURES Technology: Metal glaze A metal glazed film is deposited on a high grade ceramic body. After a helical groove has been cut in the resistive

More information

High Pulse, Fusible, Flameproof, Metal Film Resistor

High Pulse, Fusible, Flameproof, Metal Film Resistor High Pulse, Fusible, Flameproof, Metal Film Resistor FEATURES Designed to meet UL1412 safety requirements Defined fusing characteristics Superior surge handling capability > 600 V (1.2 / 50 μs pulse) Meets

More information

NTC thermistors for inrush current limiting

NTC thermistors for inrush current limiting NTC thermistors for inrush current limiting Summary NTC thermistors for inrush current limiting, as all NTCs, are made of polycrystalline mixed oxide ceramics. They suppress high inrush current surges,

More information

High Ohmic/High Voltage Metal Glaze Leaded Resistors

High Ohmic/High Voltage Metal Glaze Leaded Resistors High Ohmic/High Voltage FEATURES A metal glazed film is deposited on a high grade ceramic body. After a helical groove has been cut in the resistive layer, tinned electrolytic copper wires are welded to

More information

High Ohmic/High Voltage Metal Film Leaded Resistors

High Ohmic/High Voltage Metal Film Leaded Resistors , High Ohmic/High Voltage FEATURES Metal film technology High pulse loading (up to 10 kv) capability Small size (0207/0411) Compatible with lead (Pb)-free and lead containing soldering processes Compliant

More information

Film capacitors MKP DC link

Film capacitors MKP DC link Series/Type: Ordering code: Date: June 2008 Version: 2 Content of header bars 1 and 2 of data sheet will be automatically entered in headers and footers! Please fill in the table and then change the color

More information

Metallized Polyester Film Capacitors MKT Radial Epoxy Partly Lacquered Type

Metallized Polyester Film Capacitors MKT Radial Epoxy Partly Lacquered Type Metallized Polyester Film Capacitors MKT Radial Epoxy Partly Lacquered Type FEATURES Partly lacquered product Pitch 10 mm to 22.5 mm available loose in box Material categorization: For definitions of compliance

More information

Life Expectancy : Class A Class B Class C Class D 30,000hrs 10,000hrs 3,000hrs 1000hrs

Life Expectancy : Class A Class B Class C Class D 30,000hrs 10,000hrs 3,000hrs 1000hrs 3.2 Motor Run Capacitors : continuous operation ypical Applications : Motor Run Capacitor ideal for various motor applications in washing machine, air conditioner, electric water pump, power factor collection

More information

Applications F 622 J F 104 M 050 C. Capacitance Code (pf) First two digits represent significant figures. Third digit specifies number of zeros.

Applications F 622 J F 104 M 050 C. Capacitance Code (pf) First two digits represent significant figures. Third digit specifies number of zeros. General Purpose, Pulse and DC Transient Suppression F622 Series Metallized Polyester Film, 5 mm Lead Spacing, 50 630 VDC Overview The F622 Series is constructed of metallized stacked polyester film capacitor

More information

Film Capacitors SELF-HEALING

Film Capacitors SELF-HEALING Film Capacitors FILM CAPACITORS Plastic film capacitors are generally subdivided into film/foil capacitors and metalized film capacitors. FILM/FOIL CAPACITORS Film/foil capacitors basically consist of

More information

Current valve. for AC 24 V pulse/pause control of electrical loads up to 30 kw

Current valve. for AC 24 V pulse/pause control of electrical loads up to 30 kw 4 937 DESIO Current valve for AC 24 V pulse/pause control of electrical loads up to 30 kw SEA45.1 Use The current valve is used for the control of electric heating elements in heating, ventilation and

More information

DATA SHEET N ALUMINIUM HOUSED POWER WIREWOUND RESISTORS MOD. RFH. l f 30 L

DATA SHEET N ALUMINIUM HOUSED POWER WIREWOUND RESISTORS MOD. RFH. l f 30 L foglio 1 di 5 ALUMINIUM HOUSED POWER WIREWOUND RESISTORS MOD. 6.2 l f 30 L 80 84 71 71 95 In 350 500 750 1100 L 110 mm 160 mm 220 mm 320 mm In 60 mm 110 mm 140 mm 240 mm weight 460 g 670 g 920 g 1250 g

More information

Comparison & Solutions. Page 1

Comparison & Solutions.  Page 1 Voltage Coefficient of Capacitors Comparison & Solutions www.niccomp.com Page 1 Capacitor Technology Comparison Stableover VDC Capacitor Type Derating Advantage Weakness Voltage Temp Pros Cons Ceramic

More information

Inrush Current Limiters

Inrush Current Limiters Product Brief 2010 Inrush Current Limiters Self-Protecting PTC Resistors Self-protecting charging resistors based on PTC ceramic are suitable for smoothing capacitors in power supplies. In the event of

More information

Fixed Resistors. WDBR SERIES APPLICATIONS - Application Note. Background information

Fixed Resistors. WDBR SERIES APPLICATIONS - Application Note. Background information WDBR SERIES APPLICATIONS - Application Note This new range of thick film planar power resistors on steel, offers high pulse withstand capability, compact footprint and low profile, to many demanding applications

More information

SELECTION GUIDE. Nominal Input

SELECTION GUIDE. Nominal Input www.murata-ps.com NKE Series FEATURES RoHS Compliant Sub-Miniature SIP & DIP Styles 3kVDC Isolation UL Recognised Wide Temperature performance at full 1 Watt load, 40 C to 85 C Increased Power Density

More information

Surface Mount Multilayer Ceramic Chip Capacitor Solutions for High Voltage Applications

Surface Mount Multilayer Ceramic Chip Capacitor Solutions for High Voltage Applications Surface Mount Multilayer Ceramic Chip Capacitor Solutions for High Voltage Applications ELECTRICAL SPECIFICATIONS X7R GENERAL SPECIFICATION Note Electrical characteristics at +25 C unless otherwise specified

More information

Fusible, Non-Flammable Metal Film Leaded Resistors

Fusible, Non-Flammable Metal Film Leaded Resistors Fusible, Non-Flammable Metal Film Leaded Resistors DESCRIPTION A homogeneous film of metal alloy is deposited on a high grade ceramic body. After a helical groove has been cut in the resistive layer, tinned

More information

High Ohmic (up to 68 MΩ)/ High Voltage (up to 10 kv) Resistors

High Ohmic (up to 68 MΩ)/ High Voltage (up to 10 kv) Resistors High Ohmic (up to 68 MΩ)/ A metal glazed film is deposited on a high grade ceramic body. After a helical groove has been cut in the resistive layer, tinned electrolytic copper wires are welded to the end-caps.

More information

High Ohmic / High Voltage Metal Glaze Leaded Resistors

High Ohmic / High Voltage Metal Glaze Leaded Resistors High Ohmic / High Voltage Metal Glaze Leaded Resistors A metal glazed film is deposited on a high grade ceramic body. After a helical groove has been cut in the resistive layer, tinned electrolytic copper

More information

Standard Thick Film Chip Resistors

Standard Thick Film Chip Resistors Standard Thick Film Chip Resistors FEATURES Stability R/R = 1 % for 00 h at 70 C 2 mm pitch packaging option for size Pure tin solder contacts on Ni barrier layer provides compatibility with lead (Pb)-free

More information

DATA SHEET SURFACE-MOUNT CERAMIC MULTILAYER CAPACITORS General Purpose & High Capacitance Class 2, X7R

DATA SHEET SURFACE-MOUNT CERAMIC MULTILAYER CAPACITORS General Purpose & High Capacitance Class 2, X7R DATA SHEET SURFACE-MOUNT CERAMIC MULTILAYER CAPACITORS General Purpose & High Capacitance Class 2, 6.3 V TO 50 V 100 pf to 22 µf RoHS compliant & Halogen Free Product Specification October 13, 11 V.8 Product

More information

X and Y Capacitors. Copyright 2008 KEMET

X and Y Capacitors. Copyright 2008 KEMET X and Y Capacitors X Capacitors Two Major Types: X2 and X1 X2 capacitors Agency tested with 2,500 volt surge test. Satisfies 99% of the applications. X1 capacitors Agency tested with 4,000 volt surge test.

More information

Power Resistor Thick Film Technology

Power Resistor Thick Film Technology Power Resistor Thick Film Technology LTO series are the extension of RTO types. We used the direct ceramic mounting design (no metal tab) of our RCH power resistors applied to semiconductor packages. FEATURES

More information

Pulse Proof Thick Film Chip Resistors

Pulse Proof Thick Film Chip Resistors Pulse Proof Thick Film Chip Resistors FEATURES High pulse performance, up to kw Stability R/R 1 % for h at 70 C AEC-Q200 qualified Material categorization: for definitions of compliance please see www.vishay.com/doc?99912

More information

SUCCESS EPCOS Capacitors

SUCCESS EPCOS Capacitors SUCCESS EPCOS Inc. Capacitors Group April, 2012 EV / HV / E-Mobility Battery charger system & Inverter On Board and Off Board Assembly Trend: Wireless Charging DC/DC Converter Filtering DC Link E-Mobility

More information

AC/DC Power Modules. not recommended for new design in. TML Series, 5 to 30 Watt. Features. Models

AC/DC Power Modules. not recommended for new design in. TML Series, 5 to 30 Watt. Features. Models , to 0 Watt Features Encapsulated power Supplies PCB mount or chassis mount with screw terminals Single, dual and triple output models Universal input 8 VAC, 7 0 Hz EMI meets EN 0, class B and FCC, level

More information

EDCON-COMPONENTS DATA SHEET. MLCC Chip Capacitor Size 1210 Serie: I X7R= X7R Material 102= 1000Volt 223= 22000pf. Material: Voltage: Range:

EDCON-COMPONENTS DATA SHEET. MLCC Chip Capacitor Size 1210 Serie: I X7R= X7R Material 102= 1000Volt 223= 22000pf. Material: Voltage: Range: DATA SHEET Serie: Mat. Code X7R Voltage Code 102 Range Code 223 Material: Voltage: Range: X7R= X7R Material 102= 1000Volt 223= 22000pf Serie No.: APPD: Schumi FINISH Jamy Sheet No. 1 from 14 Customer:

More information

SMD High Power Precision Resistors

SMD High Power Precision Resistors Key Features High precision - TCR 5ppm/ C and 10ppm/ C Tolerance down to 0.01% Thin film (nichrome) Choice of packages Stable high frequency performance Temperature range -55 C to +155 C Applications Communications

More information

Lead (Pb)-Bearing Thick Film, Rectangular Chip Resistors

Lead (Pb)-Bearing Thick Film, Rectangular Chip Resistors FEATURES Stability ΔR/R = 1 % for 00 h at 70 C Lead (Pb)-bearing termination plating on Ni barrier layer Metal glaze on high quality ceramic Halogen-free according to IEC 61249-2-21 definiton AEC-Q200

More information

Sales: Technical: Fax:

Sales: Technical: Fax: DATA SHEET Metal film resistors Order code Manufacturer code Description 62-7950 FMF-100F-470K-T 470K 1W METAL FILM RESISTOR (RC) 62-7954 FMF-100F-1M-T 1M 1W METAL FILM RESISTOR (RC) 62-7942 FMF-100F-100K-T

More information

SuperTan Extended (STE) Capacitors, Wet Tantalum Capacitors with Hermetic Seal

SuperTan Extended (STE) Capacitors, Wet Tantalum Capacitors with Hermetic Seal SuperTan Extended () Capacitors, Wet Tantalum Capacitors with Hermetic Seal FEATURES SuperTan Extended () represents a major breakthrough in wet tantalum capacitor Available technology. Its unique cathode

More information

DYNACOMP. The top-class reactive power compensator

DYNACOMP. The top-class reactive power compensator DYNACOMP The top-class reactive power compensator Dynacomp vs Electromechanical switching of capacitors Electromechanical switching of capacitors Transients at switching Conventional banks with contactors

More information

TC50 High Precision Power Thin Film chip resistors (RoHS compliant Halogen Free) Size 1206, 0805, 0603

TC50 High Precision Power Thin Film chip resistors (RoHS compliant Halogen Free) Size 1206, 0805, 0603 WF2Q, WF08Q, WF06Q ±%, ±0.5%, ±0.25%, ±0.%, ±0.05% TC50 High Precision Power Thin Film chip resistors (RoHS compliant Halogen Free) Size 206, 0805, 0603 *Contents in this sheet are subject to change without

More information

Interference Suppression Film Capacitors MKP Radial Potted Type

Interference Suppression Film Capacitors MKP Radial Potted Type MKP338 6 Y2 Vishay BCcomponents Interference Suppression Film Capacitors 168x12(halfpage) l P Dimensions in mm Note (1) F - F < 0.3 mm F = 7.5 mm + 0.6 mm/- 0.1 mm APPLICATIONS For standard line bypass

More information

Types MC and MCN Multilayer RF Capacitors

Types MC and MCN Multilayer RF Capacitors High-Frequency, High-Power, High-Voltage Chips with Nonmagnetic Option Rugged flexibility and compatibility with FR4 boards make Type MC and MCN capacitors ideal for use where other multilayer caps aren

More information

Thin Film High Precision Chip Resistors

Thin Film High Precision Chip Resistors Thin Film High Precision Chip Resistors WF Series Size 252, 200, 20, 206, 0805, 0603, 0402, 020 Tolerance ±%, ±0.5%, ±0.25%, ±0.%, ±0.05% TCR ±50ppm, ±25ppm, ±5ppm, ±0ppm, ±5ppm RoHS Compliant *Contents

More information

Power chip resistor size 2512 PRC221 5%; 2% FEATURES Reduced size of final equipment Low assembly costs Higher component and equipment reliability.

Power chip resistor size 2512 PRC221 5%; 2% FEATURES Reduced size of final equipment Low assembly costs Higher component and equipment reliability. FEATURES Reduced size of final equipment Low assembly costs Higher component and equipment reliability. APPLICATIONS Power supplies Printers Computers Battery chargers Automotive Converters CD-ROM. QUICK

More information

DATA SHEET THIN FILM CHIP RESISTORS High precision - high stability RT series 0.05% TO 1%, TCR 5 TO 50 sizes 0201/0402/0603/0805/1206/ 1210/2010/2512

DATA SHEET THIN FILM CHIP RESISTORS High precision - high stability RT series 0.05% TO 1%, TCR 5 TO 50 sizes 0201/0402/0603/0805/1206/ 1210/2010/2512 Product specification June 03, 2016 V.6 DATA SHEET THIN FILM CHIP RESISTORS High precision - high stability series 0.05% TO 1%, TCR 5 TO 50 sizes 0201/0402/0603/0805/1206/ 1210/2010/2512 RoHS compliant

More information

Low Resistance Chip Resistor ERL Series

Low Resistance Chip Resistor ERL Series Low Resistance Chip Resistor 1. Scope This specification applies to the ERL Low Resistance Chip Resistor for use in electronic equipments. 2. Part number E R L * * * * * R * * * * T * (1) (2) (3) (4) (5)

More information

P O W E R C A P A C I T O R A S S E M B L I E S

P O W E R C A P A C I T O R A S S E M B L I E S AMERICAN TECHNICAL CERAMICS P O W E R C A P A C I T O R A S S E M B L I E S ISO 9001 REGISTERED COMPANY Overview About ATC Power Assemblies ATC standard & custom Power Assemblies are fabricated from PARALLEL

More information

Features: High-frequency circuits. Temperature compensating. High stability. Space saving.

Features: High-frequency circuits. Temperature compensating. High stability. Space saving. Features: High-frequency circuits. Temperature compensating. High stability. Space saving. Applications: In a great variety of electronic circuits, e.g. in filters and tuning circuits where high stability

More information

However, industrial applications may utilize a relay, which short-circuits the ICL path after the inrush sequence.

However, industrial applications may utilize a relay, which short-circuits the ICL path after the inrush sequence. Application note for Inrush Current Limiters (ICL) Turning on electrical devices generally cause high inrush currents which can damage electronic components and cause interruption of the line voltage if

More information

handbook, 2 columns handbook, halfpage 085 CS

handbook, 2 columns handbook, halfpage 085 CS FEATURES Polarized aluminium electrolytic capacitors, non-solid, self healing Extended voltage and capacitance range SMD-version, fully moulded, insulated Flexible terminals, reflow and wave solderable

More information

Precision Leaded Resistors

Precision Leaded Resistors FEATURES Approved according to CECC 40101-806 Advanced thin film technology Low TC: ± 15 to Precision tolerance of value: ± 0.1 % and ± 0.25 % Superior overall : class 0.05 Wide precision range: 10 Ω to

More information

Power Forum 07 Bologna. Selecting Resistors for High Power Applications

Power Forum 07 Bologna. Selecting Resistors for High Power Applications Power Forum 07 Bologna Selecting Resistors for High Power Applications Passive Components Applications Introductions Welwyn Components: Developing Resistor Solutions for 70 Years Stephen Oxley Senior Applications

More information

Guidance for upgrading to GB4943.1-2011 (IEC 60950-1: 2005, MOD)

Guidance for upgrading to GB4943.1-2011 (IEC 60950-1: 2005, MOD) Guidance for upgrading to GB4943.1-2011 (IEC 60950-1: 2005, MOD) Note: This guidance document is a translation of official Chinese document which is issued by CQC (China Quality Certification Center) on

More information

Film Capacitors for Automotive and Industrial Applications

Film Capacitors for Automotive and Industrial Applications Film Capacitors for Automotive and Industrial Applications Davide Montanari*, Kimmo Saarinen**, Fabio Scagliarini*, Dietmar Zeidler***, Matti Niskala**, Claes Nender# KEMET Electronics Corporation, 2835

More information

Automotive and Anti-Sulfuration Chip Resistor 0402

Automotive and Anti-Sulfuration Chip Resistor 0402 The resistors are constructed in a high grade ceramic body (aluminium oxide). Internal metal electrodes are added at each end and connected by a resistive paste that is applied to the top surface of the

More information

Type RP73 Series. SMD High Power Precision Resistors. Key Features. Applications. Characteristics - Electrical - RP73 Series - Standard

Type RP73 Series. SMD High Power Precision Resistors. Key Features. Applications. Characteristics - Electrical - RP73 Series - Standard Key Features n High precision - tolerances down to 0.05% n Low TCR - down to 5ppm/ C n Stable high frequency performance n Operating temperature -55 C to +155 C n Increased power rating - up to 1.0W n

More information

RoHS APPROVAL SHEET. ituner 12V/6.6A SERIES NO. (E17) EA10953A. ( ) Edac Power Electronics (Suzhou) Co., Ltd. 59 No.59, Chang Sheng Road, Sheng Pu,

RoHS APPROVAL SHEET. ituner 12V/6.6A SERIES NO. (E17) EA10953A. ( ) Edac Power Electronics (Suzhou) Co., Ltd. 59 No.59, Chang Sheng Road, Sheng Pu, APPROVAL SHEET CUSTOMER ituner CUSTOMER P/N DESCRIPTION EDAC MODEL 12V/6.6A SERIES NO. (E17) EA10953A DATE 2010-06-22 REVISION 0 APPROVED DESIGN PREPARE RoHS CONCLUSION APPROVED CONDITON CUSTOMER S APP

More information

High Ohmic/High Voltage Metal Glaze Leaded Resistors

High Ohmic/High Voltage Metal Glaze Leaded Resistors High Ohmic/High Voltage Metal Glaze Leaded Resistors FEATURES Technology: Metal glaze A metal glazed film is deposited on a high grade ceramic body. After a helical groove has been cut in the resistive

More information

X7R Dielectric Non-Magnetic Multilayer Ceramic Capacitors

X7R Dielectric Non-Magnetic Multilayer Ceramic Capacitors X7R Dielectric Non-Magnetic Multilayer Ceramic Capacitors Product Features Non-Magnetism, Suitable for MRI Part Numbering C 0603 X 222 K 500 P T 1 2 3 4 5 6 7 8 Chip Capacitor Chip Capacitor Dimensions

More information

威迪電子 ( 東莞 ) 有限公司制作日期 版本 06

威迪電子 ( 東莞 ) 有限公司制作日期 版本 06 文件編號 WD-AP-08 頁次 08/01 1. Scope: This specification applied to capacitor for type MPT Capacitor r(axial And Tubular)) 2. Temperature 2-1 Rated Temperature : 85 2-2 Rated Temperature Range : -40 ~ +105

More information

Chrome DIN Rail Power Supply 12V 10W 1 Phase (Class II & NEC Class 2) / DRC-12V10W1AZ

Chrome DIN Rail Power Supply 12V 10W 1 Phase (Class II & NEC Class 2) / DRC-12V10W1AZ Highlights & Features Protection Class II, Double Isolation (No Earth connection is required) Universal AC input voltage and full power up to 55 C Power will not de-rate for the entire input voltage range

More information

For the electronic measurement of current: DC, AC, pulsed..., with galvanic separation between the primary circuit and the secondary circuit.

For the electronic measurement of current: DC, AC, pulsed..., with galvanic separation between the primary circuit and the secondary circuit. Current Transducer CTSR series I PRN = 300, 600 ma Ref: CTSR 0.3-P, CTSR 0.6-P For the electronic measurement of current: DC, AC, pulsed..., with galvanic separation between the primary circuit and the

More information

Chrome DIN Rail Power Supply 24V 91.2W 1 Phase (Class II & NEC Class 2) / DRC-24V100W1AZ

Chrome DIN Rail Power Supply 24V 91.2W 1 Phase (Class II & NEC Class 2) / DRC-24V100W1AZ Highlights & Features Protection Class II, Double Isolation (No Earth connection is required) Universal AC input voltage without power de-rating Efficiency > 87.0% @ 115Vac, > 89.0% @ 230Vac NEC Class

More information

HIGH PERFORMANCE EQUIPMENT FILTERS FOR GENERAL PURPOSE AND SWITCHED MODE POWER SUPPLY APPLICATIONS

HIGH PERFORMANCE EQUIPMENT FILTERS FOR GENERAL PURPOSE AND SWITCHED MODE POWER SUPPLY APPLICATIONS HIGH PERFORMANCE EQUIPMENT FILTERS HIGH PERFORMANCE EQUIPMENT FILTERS FOR GENERAL PURPOSE AND SWITCHED MODE POWER SUPPLY APPLICATIONS FM 00699 MPE Limited Hammond Road Knowsley Industrial Park Liverpool

More information

Pulse Proof, High Power Thick Film Chip Resistors

Pulse Proof, High Power Thick Film Chip Resistors Pulse Proof, High Power Thick Film Chip Resistors STANDARD ELTRICAL SPIFICATIONS MODEL CASE SIZE INCH CASE SIZE METRIC POWER RATING P 70 W LIMITING ELEMENT VOLTAGE U max. AC/DC -HP e3 FTURES Excellent

More information

WCAP-CSGP Ceramic Capacitors

WCAP-CSGP Ceramic Capacitors A Dimensions: [mm] B Recommended land pattern: [mm] D1 Electrical Properties: Properties Test conditions Value Unit Tol. Capacitance 1±0.2 Vrms, 1 khz ±10% C 15000 pf ± 10% Rated voltage Dissipation factor

More information

Chrome DIN Rail Power Supply 24V 30W 1 Phase (Class II & NEC Class 2) / DRC-24V30W1AZ

Chrome DIN Rail Power Supply 24V 30W 1 Phase (Class II & NEC Class 2) / DRC-24V30W1AZ Highlights & Features Protection Class II, Double Isolation (No Earth connection is required) Universal AC input voltage without power de-rating Efficiency > 87.0% @ 115Vac & 230Vac NEC Class 2 / Limited

More information

with TCR of ±0.05 ppm/ C and Power Coefficient of 5 ppm at Rated Power and Load Life Stability of ±0.005% (50 ppm) INTRODUCTION

with TCR of ±0.05 ppm/ C and Power Coefficient of 5 ppm at Rated Power and Load Life Stability of ±0.005% (50 ppm) INTRODUCTION VSMP Series (63, 85, 85, 126, 126, 156, 156, 21, 21, 2512) (Z 2512) Foil) Ultra High Precision Foil Wraparound Surface Mount Chip Resistor with TCR of ±.5 ppm/ C and Power Coefficient of 5 ppm at Rated

More information

DATA SHEET THIN FILM CHIP RESISTORS High precision - high stability RT series 0.05% TO 1%, TC 10 TO 50 sizes 0402/0603/0805/1206/ 1210/2010/2512

DATA SHEET THIN FILM CHIP RESISTORS High precision - high stability RT series 0.05% TO 1%, TC 10 TO 50 sizes 0402/0603/0805/1206/ 1210/2010/2512 DATA SHEET THIN FILM CHIP RESISTORS High precision - high stability series 0.05% TO 1%, TC TO 50 sizes 0402/0603/0805/1206/ 12/20/2512 RoHS compliant Product specification Product specification 2 SCOPE

More information

4. Classification E: High capacity. 3. Terminal Form Blank: Tab terminals (#250 terminals) Tab terminals #250 SPST-NO

4. Classification E: High capacity. 3. Terminal Form Blank: Tab terminals (#250 terminals) Tab terminals #250 SPST-NO New Product News G9EJ--E Compact Capable of Switching 4 V A DC loads Actualize a high capacity interruption through the function of extinction of magnetic arc by adopting high-efficiency magnetic circuit.

More information

Lead (Pb)-free Thick Film, Rectangular Chip Resistors

Lead (Pb)-free Thick Film, Rectangular Chip Resistors D../CRCW... e3 Lead (Pb)-free Thick Film, Rectangular Chip Resistors FEATURES High volume product suitable for commercial and special applications Excellent stability (ΔR/R % for 0 h at 70 C) Compliant

More information

DATA SHEET HIGH POWER CHIP RESISTORS RC high power series 5%, 1% sizes 0603/0805/1206/2512. RoHS compliant & Halogen free

DATA SHEET HIGH POWER CHIP RESISTORS RC high power series 5%, 1% sizes 0603/0805/1206/2512. RoHS compliant & Halogen free DATA SHEET HIGH POWER CHIP RESISTORS RC high power series 5%, 1% sizes 0603/005/1206/2512 RoHS compliant & Halogen free Product specification Supersedes Date of Mar. 06, 2003 Product specification 2 SCOPE

More information

Features. Applications. Truth Table. Close

Features. Applications. Truth Table. Close ASSR-8, ASSR-9 and ASSR-8 Form A, Solid State Relay (Photo MOSFET) (0V/0.A/0Ω) Data Sheet Description The ASSR-XX Series consists of an AlGaAs infrared light-emitting diode (LED) input stage optically

More information

Redefine Innovative Metering. Current. Transformers

Redefine Innovative Metering. Current. Transformers Current Transformers ZIEGLER CURRENT TRANSFORMER SERIES Ziegler Instruments, leader in measuring instruments unveils its world class plastic cased Square and Round Current Transformers. Ziegler Current

More information

STIEC45-xxAS, STIEC45-xxACS

STIEC45-xxAS, STIEC45-xxACS Transil TVS for IEC 61000-4-5 compliance Datasheet - production data differential mode MIL STD 883G, method 3015-7 Class 3B 25 kv HBM (human body model) Resin meets UL 94, V0 MIL-STD-750, method 2026 solderability

More information