Colibri-L LE LE17, LE23 und LE34 Electric linear lifting unit with integrated Colibri drive.
|
|
- Della Wilkerson
- 7 years ago
- Views:
Transcription
1 Datasheet Colibri-L LE LE17, LE23 und LE34 Electric linear lifting unit with integrated Colibri drive. All in one unit / All from one supplier Properties Size 17 23K 23L 34 Properties The Colibri-L LE unit is a linear actuator with piston rod and permanently attached motor with integrated positioning controller.the unit converts the rotary motion of the motor with the driven spindle into a linear movement of the piston rod. The unit can be controlled with simple digital signals, similar to a control of a pneumatic cylinder. Therefore the Colibri-L LE unit is suitable for simple applications in automation that in the past were realised with pneumatic solutions. Optionally, the unit can also be equipped with bus interfaces such as, or Profibus. This allows a very simple realisation of more complex positioning sequences. Spindle axis with piston rod and fixed-mounted stepper motor with integrated stepper motor controller integrated encoder to monitor the position as standard Insensitive to contamination by sealed enclosure Stroke: -300 mm Force up to 0 N Speed up to 700 mm / s Control via a simple I / O interface or via bus systems such as, Profibus, Technical data Spindle pitch Spindle Ø max. feed force max. speed stroke* profile size motor size [mm] [mm] [N] [mm/s] [mm] [mm] ,35 6, ,7 6, ,4 6, ,35 6, ,7 6,35 1 3,4 6, ,35 6, ,7 6,35 2 2,4 6, ,35 6, ,7 6, ,4 6, x36 Nema 17 58x58 Nema 23 Nema 23 Nema34 available control variants Digital I/O, Digital I/O, Digital I/O, Digital I/O *On request other lengths available! Colibri-L LE17, LE23 u. LE34 Stand: Seite 1 von 6
2 Example Colibri-L LE17 with basic control MINI Pos. construction LE17 remark 1 stepper motor with encoder integrated encoder for positioning monitoring 2 positioning controller Various control options are available 3 Sub-D connector depending on control variant 4 coupling housing 5 aluminium profile 36x36 mm 6 Piston rod with internal rotation and mounting bolts with M8 male thread, the piston rod is sealed with a scraper ring. 7 Flange bolts with integrated thread as fixation 4xM5 8 scraper ring Colibri-L LE17, LE23 u. LE34 Stand: Seite 2 von 6
3 Dimension Colibri-L LE17 Figure with Mini-housing (basic version no bus version available): Characteristic Colibri-L LE17 Colibri-L LE17, LE23 u. LE34 Stand: Seite 3 von 6
4 Dimension Colibri-L LE23 Figure with large housing for Bus-versions:: Figure with Mini-housing (basic version no bus version available): Standard: Mini: Colibri-L LE17, LE23 u. LE34 Stand: Seite 4 von 6
5 Characteristic Colibri-L LE23K Characteristic Colibri-L LE23L Colibri-L LE17, LE23 u. LE34 Stand: Seite 5 von 6
6 Dimension Colibri-L LE34 Dimension Colibri-L LE34 Electrical data refer to the datasheet Colibri-compact drive! Colibri-L LE17, LE23 u. LE34 Stand: Seite 6 von 6
Electric Lifting Cylinder TV / KV 5 XE Load up to 6.500 N
S+R S+R automation systems GmbH Electric Lifting Cylinder TV / KV 5 XE Load up to 6.500 N Lifting Moving Positioning Design and functuion An electric lifting cylinder is an electro-mechanical drive unit.
More informationReaction Torque Sensor
Force 1 1 N m up to 1 000 1 000 N m Type 9329A 9389A These easy to install piezoelectric reaction torque sensors are particularly suitable for measuring rapidly changing torques at non-rotating shafts.
More informationA descriptive definition of valve actuators
A descriptive definition of valve actuators Abstract A valve actuator is any device that utilizes a source of power to operate a valve. This source of power can be a human being working a manual gearbox
More informationUNIT II Robots Drive Systems and End Effectors Part-A Questions
UNIT II Robots Drive Systems and End Effectors Part-A Questions 1. Define End effector. End effector is a device that is attached to the end of the wrist arm to perform specific task. 2. Give some examples
More informationCIM Computer Integrated Manufacturing
INDEX CIM IN BASIC CONFIGURATION CIM IN ADVANCED CONFIGURATION CIM IN COMPLETE CONFIGURATION DL CIM A DL CIM B DL CIM C DL CIM C DL CIM B DL CIM A Computer Integrated Manufacturing (CIM) is a method of
More informationThe Assembly Automation Industry
System Solutions For The Assembly Automation Industry Your Resource For Motion Control Components, Systems and Solutions Assembly Automation Industry: A Focus Parker means components, systems and partnerships
More informationSetting up the DeskCNC controller.
1) Determine the steps to linear motion ratios for each axis. 2 2) Determine Maximum velocity (speed). 3 3) Setting up the software Machine Tab 4 4) Setting up the software DeskCNC Setup Tab 5 5) Setting
More informationLinear modules Lifting units Rotary modules Grip modules Inductive proximity switches Plug connectors
20000 Linear modules Lifting units Rotary modules Grip modules Inductive proximity switches Plug connectors 23000 22000 21000 20000 09000 08000 07000 06000 05000 04000 03000 02000 01000 823 Notes 824 Technical
More informationHydraulic Control Technology for Wind Turbine Generators
Industrial Hydraulics Electric Drives and Controls Linear Motion and Assembly Technologies Pneumatics Service Automation Mobile Hydraulics Hydraulic Control Technology for Wind Turbine Generators Extra
More informationMechanical Cylinders
Mechanical Cylinders 1 Wormgear 2 Spherical plain bearings 3 Motor flange, IEC-norm 4 Lubricator 5 Air vent 6 Spindle nut 7 Trapezoidal spindle 8 Cylinder tube 9 Piston tube 10 Sealing 11 Wiper 12 Rotation
More informationCylinders DIN ISO 6431 and VDMA 24 562
Double acting Standard executions Version Shape of barrel Symbol Type MAGNETIC STANDARD AMA AMT 1 For the magnetic reed switches type ASV see from page 1.110.1. For coupling cylinders/reed swiches/brackets
More informationManual piston sampler...m 11
SAMPLING Manual piston sampler...m 11 Screw sampler...prec 22...PREC 100 Slide sampler...pr 55 Rotative screw sampler...prv Piston sampler...p 11 Sampler on belt conveyor...pba Rotating cup sampler...pgr
More informationUNIT 1 INTRODUCTION TO NC MACHINE TOOLS
UNIT 1 INTRODUCTION TO NC MACHINE TOOLS Structure 1.1 Introduction Objectives 1.2 NC Machines 1.2.1 Types of NC Machine 1.2.2 Controlled Axes 1.2.3 Basic Components of NC Machines 1.2.4 Problems with Conventional
More informationCNC HARDWARE & TOOLING BASICS
Computer Aided Manufacturing (CAM) CNC HARDWARE & TOOLING BASICS Assoc. Prof. Dr. Tamer S. Mahmoud 1. Parts of CNC Machine Tools Any CNC machine tool essentially consists of the following parts: Part Program,
More informationThermodynamic efficiency of an actuator that provides the mechanical movement for the driven equipments:
1. Introduction 1.1. Industry Automation Industry automation is the term that describes a vital development programme of a production community where the project engineers build up automated manufacturing
More informationNAGEL ECO 180 FLEXIBLE HONING SYSTEM
NAGEL ECO 180 FLEXIBLE HONING SYSTEM NEW DEVELOPMENT For Small and Medium Production Runs In-process gauging, Roughing and finishing in a single spindle Tel: 734-426-1812 www.nagelusa.com MACHINE HIGHLIGHTS
More informationLINEAR ACTUATORS. Linear Actuators. Linear Actuators. Linear Actuators are Actuators that creates motion in a straight line, as contrasted
LINEAR ACTUATORS Linear Actuators Linear Actuators Linear Actuators are Actuators that creates motion in a straight line, as contrasted with circular motion of a conventional electric motor. Linear actuators
More informationSERVOMECH Linear Actuators
. SERVOMECH Linear actuators SERVOMECH mechanical linear actuators are motorised mechanical cylinders able to transform the rotary motion of a motor into the linear motion of a push rod. They are designed
More informationProduct catalogue, pipe and sewer cleaning systems
Product catalogue, pipe and sewer cleaning systems Nozzles Rotorjet trolley Hose reels Cleaning devices www.hammelmann.com Contents (Navigation via Bookmarks) Rotorjet trolley Rotary joints, spray pipes
More informationScrewdriver Function Module for the automatic Screw-Assembly
Screwdriving technology Automation Air motors Air tools Machine Building Components Screwdriver Function Module for the automatic Screw-Assembly wide product variety for all applications maximum ease of
More informationMachine bolt shut-off nozzle type BHP pneumatically or hydraulically controlled
Machine bolt shut-off nozzle type BHP pneumatically or hydraulically controlled Applications: Thermoplastics (not applicable for PVC) Shut-off mechanism: Bolt shut-off with integrated 2-way actuator pneumatically
More informationTechnical News Bulletin
Technical News Bulletin January 2003 Two-way air operated Funnel Mechanism 200-2100 Up-Stroke Cushion Control Valve Top-mounted Check Valve Increased Stroke Rigid Cam Cam Roller Fixation Page 1/5 1. Description
More informationTN2000 Series Pneumatic Piston Actuators for DN125 to DN300 SPIRA-TROL Series Control Valves
Local regulations may restrict the use of this product to below the conditions quoted. In the interests of development and improvement of the product, we reserve the right to change the specification without
More informationCustom configuration such as modified angle dimensions, other flange standards, 3-way function, alternative materials.are available on request.
LEAKVALVE: HIGHLIGHTS The core of this valve is a diaphragm in stainless steel 316L, gold plated. Robust, it cannot be damaged with any normal methods. The dead volume is kept as small as possible. There
More informationSKP Series SKP15U.. Gas Valve Actuator with Safety Shutoff Function
SKP Series SKP15U.. Gas Valve Actuator with Safety Shutoff Function Document No. 155-751 SKP15U.. Description Only when assembled to Series VGU Gas valves SKP15 electro-hydraulic actuators combine with
More information[ means: Save time, money and space! MAXXMILL 500. Vertical milling center for 5-side machining
[ E[M]CONOMY] means: Save time, money and space! MAXXMILL 500 Vertical milling center for 5-side machining MAXXMILL 500 MAXXMILL 500 is the ideal vertical milling center for the for the 5-axis operation
More informationDesign and Modeling of Fluid Power Systems ME 597/ABE 591 Lecture 5
Systems ME 597/ABE 591 Lecture 5 Dr. Monika Ivantysynova MAHA Professor Fluid Power Systems MAHA Fluid Power Research Center Purdue University Displacement Machines Study different design principles and
More informationCOUNTERBALANCE VALVES
COUNTERBALANCE VALVES Introduction They are modulating valves which allow free flow into the actuator and then block the reverse flow until they feel a pilot pressure inversely proportional to the load
More informationPosition Transducers with Restoring Spring 10, 25, 50, 75, 100 mm TR, TRS Series
Position Transducers with Restoring Spring 10, 25, 50, 75, 100 mm TR, TRS Series Special features long life 100 x 10 6 movements outstanding linearity up to ±0.075% choice of plug or cable connection DIN
More informationDiaphragm Actuators Favorable Variety Pneumatic Diaphragm Actuators Electric Actuators Hydraulic Actuators
Favorable Variety Whether rotary or linear with pneumatic, electric, and hydraulic valve actuators from ARCA Regler GmbH, you always have the right solution at hand. ARCA s comprehensive product portfolio
More information.OR.AT.ATTORNEY.AUCTION.BARGAINS.BAYERN.BERLIN.BLACKFRIDAY.BOUTIQUE.BRUSSELS.BUILDERS
.AC.BIO.RESTAURANT.APARTMENTS.CASINO.SCHOOL.KIM.ACADEMY.ACCOUNTANTS.ACTOR.ADULT.AE.AERO.AG.AGENCY.AIRFORCE.ARCHI.ARMY.ASIA.ASSOCIATES.AT.CO.AT.OR.AT.ATTORNEY.AUCTION.AUDIO.BAND.BANK.BAR.BARGAINS.BAYERN.BE.BEER.BERLIN.BID.BIKE.BINGO.BIZ.BLACK.BLACKFRIDAY.BLUE.BOUTIQUE.BRUSSELS.BUILDERS.BUSINESS.BZ.CO.BZ.COM.BZ.ORG.BZ.CAB.CAFE.CAMERA.CAMP.CAPITAL.CARDS.CARE.CAREERS.CASA.CASH.CATERING.CC.CENTER.CH.CHAT.CHEAP.CHRISTMAS
More information10. CNC Hardware Basics
CAD/CAM Principles and Applications 10 CNC Hardware Basics 10-1/10-20 by P.N.Rao 10. CNC Hardware Basics 10.1 Structure of CNC machine tools Table 10.1 Some design criteria for CNC machine tool design
More informationDIY CNC: A REVIEW. dhaval.patel1@git.org.in. 382481, ani_kyadaauto@yahoo.co.in. Abstract
DIY CNC: A REVIEW Dhaval B. Patel 1 *, Aniruddh R. Kyada 2. 1 *Assistant Professor, Gandhinagar Institute of Technology, Gandhinagar 382721, dhaval.patel1@git.org.in 2 Assistant Professor, Silver Oak College
More informationUnit 24: Applications of Pneumatics and Hydraulics
Unit 24: Applications of Pneumatics and Hydraulics Unit code: J/601/1496 QCF level: 4 Credit value: 15 OUTCOME 2 TUTORIAL 2 HYDRAULIC AND PNEUMATIC CYLINDERS The material needed for outcome 2 is very extensive
More informationLinear actuator Econom 0. Our intelligent model: Econom 0. Econom 0
Linear actuator Econom 0 Our intelligent model: Econom 0 Econom 0 Linear actuators Econom 0 Description Applications Facts The users of the steel or stainless steel Econom 0 come from many different industries:
More informationQuick Reference Catalog
Gearboxes Turrets Y-Axis Rotary Tools Tool Discs B-Axis Quick Reference Catalog WWW.BARUFFALDI.IT TB Servo Turret SERVO MOTOR TURRETS TB-type turrets rotate thanks to a BRUSHLESS SERVO MOTOR controlled
More informationIRB 2600ID-15/1.85 Simple integration, high performance
Per Lowgren, Product Manager, Medium robots IRB 2600ID-15/1.85 Simple integration, high performance February 9, 2011 Slide 1 Overview of main features General purpose robot for integrated dressing solutions.
More informationARI-DP30 / DP32 / DP33 / DP34 / DP34T / DP34Tri / DP35 Pneumatic actuator ARI-DP Pneumatic actuator ARI-DP
ARI-DP30 / DP32 / DP33 / DP34 / DP34T / DP34Tri / DP35 Pneumatic actuator ARI-DP Pneumatic actuator ARI-DP ARI-DP30 Pneumatic actuator Page 2 ARI-DP32 ARI-DP33 Pneumatic actuator DP-Actuator Extended stem
More informationSensors Collecting Manufacturing Process Data
Sensors & Actuators Sensors Collecting Manufacturing Process Data Data must be collected from the manufacturing process Data (commands and instructions) must be communicated to the process Data are of
More informationStandard Cables (Without electromagnetic brake, with electromagnetic brake) CC010ES-2. 1 m CC020ES-2. 2 m CC030ES-2. 3 m CC050ES-2.
Motorized Actuators Motor Cables EZS /EZS for Clean Room Use This cable is a dedicated cable for connecting the linear slide of the EZS Series and EZS Series for Clean Room Use with the controller. Use
More informationLearning Systems Modular Systems for Mechatronics Training
Learning Systems Modular Systems for Mechatronics Training MPS Modular Production System Model industrial automation systems at various levels of complexity MPS Combinations Model specific combinations
More informationAPPLIED PNEUMATICS AND HYDRAULICS H TUTORIAL HYDRAULIC AND PNEUMATIC CYLINDERS. This work covers part of outcome 2 of the standard Edexcel module.
APPLIED PNEUMATICS AND HYDRAULICS H TUTORIAL HYDRAULIC AND PNEUMATIC CYLINDERS This work covers part of outcome 2 of the standard Edexcel module. The material needed for outcome 2 is very extensive so
More informationIntroduction to Accuracy and Repeatability in Linear Motion Systems
Introduction to accuracy and repeatability in linear motion systems By Gary Rosengren, Director of Engineering Tolomatic, Inc. About the Author Gary Rosengren is Director of Engineering at Tolomatic and
More informationAll round in Motion Control Rotating, linear and combinations of both! know-how makes the difference
All round in Motion Control Rotating, linear and combinations of both! know-how makes the difference How state-of-the-art are your drive solutions? As a manufacturer you face complex challenges. The world
More informationControl- and feedback head for integrated mounting on Robolux valves Type 2036
Control- and feedback head for integrated mounting on Robolux valves Type 203 Type 885 Type 88 can be combined with Compact stainless steel design Contactless valve position registration Coloured illuminated
More informationBolt Tensioner. Axial Bolt Tensioning using High-Pressure Hydraulic. SSV and HM Axial bolt tensioning without torquing!
Bolt Tensioner Axial Bolt Tensioning using High-Pressure Hydraulic SSV and HM Axial bolt tensioning without torquing! SSV Function of a Bolt Tensioner (SSV) PG 3 in simplified representation Bolt to tension
More informationSKYFIRE TM CNC. www. Skyfirecnc.com. SVM-2 Vertical CNC Milling Machine
SVM-2 Vertical CNC Milling Machine Datasheet Ver. 1.0 1 SUMMARY SKYFIRE provides variale versions to meet customers budget and needs. Not all appliacations need a fully equiped high end CNC. We give many
More informationMINIMAT-EC-Servo Screwdriver Spindles
Screwdriving technology Automation Air motors Air tools Screwdriver Spindles electric MINIMAT-EC-Servo Screwdriver Spindles Maximum Flexibility and process Control Straight Spindle Form - Torque range
More informationDisplacement encoders
Displacement encoders Analogue and digital For measuring and positioning For use with pneumatic components 1 Displacement encoders Key features Analogue displacement encoders MLO-POT- -TLF Conductive plastic
More informationSelecting and Sizing Ball Screw Drives
Selecting and Sizing Ball Screw Drives Jeff G. Johnson, Product Engineer Thomson Industries, Inc. Wood Dale, IL 540-633-3549 www.thomsonlinear.com Thomson@thomsonlinear.com Fig 1: Ball screw drive is a
More informationProduct catalogue, tank cleaning systems
Product catalogue, tank cleaning systems Aquamat Tank cleaning units Aquarex Tank cleaning systems www.hammelmann.com Contents (Navigation via Bookmarks) Tank cleaning units L XL XXL High pressure lance
More informationDOUBLE GATE KNIFE GATE VALVE
DOUBLE GATE KNIFE GATE VALVE The model knife gate is a bi-directional valve widely used in the Pulp and Paper industry (recycling or secondary fibre processing) designed to handle high concentrated or
More information912. The engine for construction equipment.
912. The engine for construction equipment....... 24-82 kw at 1500-2500 min -1 These are the characteristics of the 912: Air-cooled 3-, 4-, 5-, 6-cylinder naturally aspirated in-line-engines. Direct injection.
More informationTool changer. Rugged and durable. For universal use. Payload up to 800 kg
Tool changer TK-Series Rugged and durable For universal use Payload up to 800 kg 02 our own Development Dept. our own Manufacturing Division. Unbeatable in reliability. A product portfolio setting standards
More informationMDrive Linear Actuator
MDrive Linear Actuator Compact, integrated all-in-one linear motion systems Hybrid Linear Actuator Description MDrive Hybrid Linear Actuator Presentation The MDrive Hybrid Linear Actuator is a very compact,
More informationConstruction (2) Characteristics (2) Rail Type (2) Carriage Type (3) Description of Specification (4) Accuracy Grade (5) Preload Grade (6)
Contents Construction (2) Characteristics (2) Rail Type (2) Carriage Type (3) Description of Specification (4) Accuracy Grade (5) Preload Grade (6) Dust Proof (7) Dimensions of Tapped-hole Rails (8) Rail
More informationLINEAR MOTION CONTROL
LINEAR MOTION CONTROL Technical Data Sheet Static Locks RLSS Series Nexen s new generation of linear holding/locking devices take rod locking technology to the next level. With superior performance, these
More informationStretch Blow Moulding Packaging Filling Labelling Conveying. KOSME KSB R KOSME KSB R ProShape KOSME KSB RG
Stretch Blow Moulding Packaging Filling Labelling Conveying KSB R KSB R ProShape KSB RG The KSB R series A high output per blowing station even for high output levels that is a main characteristic of the
More informationProduct Information. Gateway For Connecting EnDat Encoders to PROFIBUS-DP
Product Information Gateway For Connecting EnDat Encoders to PROFIBUS-DP April 2012 PROFIBUS Gateway For Connecting EnDat Encoders Encoders with EnDat interface for connection via gateway All absolute
More informationElectro-Pneumatic Bus Door Control Mechanism
Electro-Pneumatic Bus Door Control Mechanism Application and Feature 1. Pneumatic Door Mechanism actuates the open/close movements of bus door through two double acting cylinders and two linkages with
More informationAirplane wing test stand for simulating the airstream. Airbus Deutschland GmbH
Airplane wing test stand for simulating the airstream Airbus Deutschland GmbH 2 1 Airplane wing test stand for simulating the airstream Hänchen ist standard In test stands at Airbus in Bremen, Hänchen
More informationMandrel system MIS. www.microcentric.de
Mandrel system MIS MicroCentric GmbH Berblingerstr. 16 71254 itzingen / Germany Tel.: +49 (0) 7156 17819-0 Fax: +49 (0) 7156 17819-20 E-Mail: info@microcentric.de www.microcentric.de Products in this catalog:
More informationUnited Kingdom Sweden Germany Switzerland USA, Canada and Mexico China Japan France Linear Units Y07 GB Asia Pacific Italy EU-200502-03 03JUL
Linear Units Linear Units Table of Contents Introduction... 5 Introduction... 5 How to Choose a Unit...6-7 Technical Introduction...8 - Linear Units with Ball Screw Drive and Ball Guide... 3 Introduction...
More informationFDH Series Compact Finger Slides
FDH Series Compact Finger Slides Catalog #FDH- Prices effective September 1, 11 Cylinder block- Clear anodized aluminum Top Toolplate and Front Toolbar Clear anodized aluminum Tapped mounting holes ( for
More informationActuators & Positioners LP - Linear Pneumatic Piston Actuator. Cylinder Actuators. High resolution, sensitivity, and fast response
Data Sheet DS/LP-EN Rev. F Actuators & Positioners LP - Linear Pneumatic Piston Actuator Cylinder Actuators High resolution, sensitivity, and fast response Available with 4 to 20mA position feedback Cylinders
More informationSMALLER SBD15-60 SIZE NEW NOW AVAILABLE. HepcoMotion. SBD Sealed Belt Drive
NEW SMALLER SD15-60 SIZE NOW AVAILALE HepcoMotion SD Sealed elt Drive For amendments and updates visit www.hepcomotion.com and select literature button Introduction The HepcoMotion SD is an exceptionally
More informationSmall parts assembly, semiconductor and electronics industry
Small parts assembly, semiconductor and electronics industry You live speed and innovation. You think efficiency and miniaturisation. We are your solution for electrics and pneumatics. Technology Engineering
More informationQ&A Session for Advanced Ball Screws 102: Troubleshooting for Design Engineers
Q&A Session for Advanced Ball Screws 102: Troubleshooting for Design Engineers Topic: Noise Q: Is there a way to predict/calculate noise on a ball screw? A: No, there is no way to calculate the noise of
More information225-230T-05-S2. Rotary drive without spring return. Technical data sheet. Description. Technical data. Actuators
Actuators Technical data sheet 225-230T-05-S2 Rotary drive without spring return Description Actuator for adjusting air dampers of 90 angle of rotation to be used in HVAC installations. Torque Motor 5
More informationElectric Actuators and Controllers/Drivers
Electric Actuators and Controllers/Drivers Page 1 Slider Type Series LEF Page 2 Rod Type Series LEY Page 3 Electric Slide Table Series LES Page 4 Electric Rotary Table Series LER Page 5 Electric Gripper
More informationSense it! Connect it! Bus it! Solve it! EncoderS
Sense it! Connect it! Bus it! Solve it! EncoderS Incremental encoders Incremental encoders use electrical pulses to measure rotation speed or position. The dual-channel incremental encoders of the Ri series,
More informationSTAR Linear Bushings and Shafts Supplement RE 83 117/2001-08. Linear Motion and Assembly Technologies
STAR Linear Bushings and Shafts Supplement RE 83 117/2001-08 Linear Motion and Assembly Technologies STAR Linear Motion Technology Ball Rail Systems Standard Ball Rail Systems Ball Rail Systems with Aluminum
More information1115 4G SERIES GOVERNOR. 4-20 ma ANALOGUE DIGITAL SPEED SETTING
1115 4G SERIES GOVERNOR with 4-20 ma ANALOGUE & DIGITAL SPEED SETTING PO Box 28, 9300AA Roden, The Netherlands Tel: +31 505019888 Fax: +31 505013618 E-mail: regulateurs@regulateurs-europa.com 1115 4G
More informationElectric Rotary Actuator - On/Off or programmable control actuator
Electric Rotary Actuator - On/Off or programmable control actuator Direct mounting on quarter-turn valves Manual override standard Corrosion resistant Adjustable limit switches Multi-voltage version Type
More informationGas Turbine Fuel Control Valve
Gas Turbine Fuel Control Valve Model 8402 Overview The 8402G Fuel Valve System is a balanced rotary valve with an electric stepper-motor actuator. This high performance gas turbine fuel control valve with
More informationSECTION G2: CABLE PROCESSOR MODULE MAINTENANCE
SECTION G2: CABLE PROCESSOR MODULE MAINTENANCE Cable Processor Module overview WARNING! When tipping the Cable Processor Module back, (after removing the toggle arm pin), use extreme caution not to drop
More informationS 700 K point machine. Setting points reliably. www.siemens.com/mobility
S 700 K point machine Setting points reliably www.siemens.com/mobility S 700 K point machine Putting you on the right track Point machines are an important factor in the safety of rail services. They need
More informationSteering unit. Table of contents. Features RE 11872/05.06. Type LAGL. Frame sizes 500 to 1000 Component series 1X Maximum flow 80 l/min
Steering unit RE 11872/05.06 /10 Type LAGL Frame sizes 500 to 1000 Component series 1X Maximum flow 80 l/min H7375 Table of contents Contents Page Features 1 Ordering code 2 Function, section 3 Device
More informationSITEMA PowerStroke. Technical Information TI-P12. 1 Function. 2 Applications. Mould Closing Devices series FSKP. Contents
SITEMA PowerStroke FSP ocking, actuating and releasing by pneumatic pressure English translation of German original Technical Information TI-P1 SITEMA PowerStroke Mould Closing Devices series FSP drive
More informationPositioner Versions. Remote feed-back. Local display, Electric / Hydraulic. Remote feed-back Electric / Hydraulic. Embedded Control Positioner
Quick Stepper 3G ECP Positioner Versions Mechanical feed-back Pneumatic Remote feed-back Local display, Pneumatic Remote feed-back Local display, Electric / Hydraulic Remote feed-back Electric / Hydraulic
More informationSeries: IDAM Servo Drive E Digital Motor Drive - DMD-078.12
Series: IDAM Servo Drive E Digital Motor Drive - DMD-078.12 inside Integrated amplifiers for 8 single-phase motors, 4 two-phases motors or 4 three-phases motors or combinations of them in one device Position
More informationLoad Frames. www.humboldtmfg.com 1.800.544.7220 708.468.6300
Lab Equipment Soil Lab Consolidation Load Frames 80 52 ConMatic IPC, Automated Consolidation System, 120/220V 50/60Hz HM-2470A.3F The ConMatic IPC is a fully-automated, incremental pressure controller
More informationDiaphragm Seal with flush diaphragm and flange acc.to SMS. Completed with pressure gauge in stainless steel, liquid filled or pressure transmitter
Ed.15.01 Design Diaphragm Seal with flush diaphragm and flange acc.to SMS. Completed with pressure gauge in stainless steel, liquid filled or pressure transmitter Standard 4026/60H Pressure rate PN 40
More informationFAG Hydraulic nuts. Technical Product Information
FAG Hydraulic nuts Technical Product Information Contents Application 2 Design 2 Design variants 3 Pressure generators, connectors 4 Dimension tables for FAG hydraulic nuts (metric) 6 Dimension tables
More informationSHEDDING DOBBIES. Prof. Dr. Emel Önder Ass.Prof.Dr.Ömer Berk Berkalp
SHEDDING DOBBIES Prof. Dr. Emel Önder Ass.Prof.Dr.Ömer Berk Berkalp 1 Dobby mechanisms are more complicated than cam systems, have higher initial and maintenance costs, can produce more sophisticated weaves,
More informationCentro-Matic Automatic Lubrication Systems System Controls
Selecting the right controls for your automated lubrication system is one of the last steps in the design process. Several different models may be chosen to control power-operated pumps, depending on the
More informationUnit 24: Applications of Pneumatics and Hydraulics
Unit 24: Applications of Pneumatics and Hydraulics Unit code: J/601/1496 QCF level: 4 Credit value: 15 OUTCOME 2 TUTORIAL 4 DIRECTIONAL CONTROL VALVES The material needed for outcome 2 is very extensive
More informationLoewe GK Installation and operating manual
SCHMIDT-KUPPLUNG GmbH Loewe GK Installation and operating manual Loewe GK Loewe GK: angular and radial displacement compensation combined with axial stiffness. The compact coupling combines angular and
More informationUnited Kingdom Sweden Germany Switzerland USA, Canada and Mexico China Japan France Linear Units Y07 GB Asia Pacific Italy EU-200502-03 03JUL
Linear Units Danaher Motion - Helping you build a better machine, faster Danaher Corporation combined over 30 industry-leading brands such as Kollmorgen, Thomson, Dover, Pacific Scientific, Portescap,
More information3 WAY (3/2) POPPET VALVES FOR AIR AND VACUUM SERVICE SOLENOID OR AIR ACTUATED BROCHURE N-223
3 WAY (3/2) POPPET VALVES FOR AIR AND VACUUM SERVICE SOLENOID OR AIR ACTUATED BROCHURE N-223 HERION S HIGH PERFORMANCE POPPET VALVES For those applications requiring high Cv, fast response times, large
More information10 tips for servos and steppers a simple guide
10 tips for servos and steppers a simple guide What are the basic application differences between servos and steppers? Where would you choose one over the other? This short 10 point guide, offers a simple
More informationDifferential-Hall-Effect based Sensors Series A5S
Speed and Frequency Seite 1 von 6 Differential-Hall-Effect based Sensors Series A5S Outstanding Characteristics Speed range covering most demands: from close to zero up to 25,000 pulses/second (response
More informationHousing diameter Shaft diameter 1. Flange (Mounting of housing) Protection class shaft input (EN 60529) Protection class housing (EN 60529)
Direct mounting without coupling Flexible hollow shaft design up to diameter 4 mm Through hollow shaft or as end shaft (blind shaft) Easy installation by means of clamping shaft or blind shaft Short overall
More informationISO/VDMA Actuators. Engineering GREAT Solutions
ISO/VDMA Actuators Engineering GREAT Solutions 02 ISO/VDMA Actuators Contents 03 Introduction 04 ISO/VDMA Actuators 06 The ISO/VDMA Range 08 Industrial Options 10 Cleanline Options 12 IVAC innovation to
More information-Encoder with end or hollow shaft ø10-15 mm. hollow shaft ø12 mm -Resolution max. 32 ppr. -Resolution max. 1024 ppr -Magnetic sensing
Incremental encoders Compact configurations Shaft ø4 mm and ø5 mm End shaft ø8-16 mm Hollow shaft ø6-15 mm Optical and magnetic sensing Resolution max. 2048 pulses Rotation speed max. 12000 rpm Protection
More informationRules of Actuator and Guide Alignment in Linear Motion Systems
Rules of Actuator and Guide Alignment in Linear Motion Systems By Gary Rosengren, Director of Engineering Tolomatic, Inc. About the Author Gary Rosengren is Director of Engineering at Tolomatic and has
More informationTyco PremiAir Pneumatic Actuators
A comprehensive range of pneumatic actuators, conforming to EN ISO 5211, providing compact, reliable and economical powered operation for all types of quarter turn valves. Features Mounting to valve either
More informationFlow Charts and Servomotors (background to Lab #2) Things to learn about: flow charts for design. MECH452 2014 Lecture #2 flow charts & servos rev2
MECH 452 Lecture #2 Flow Charts and Servomotors (background to Lab #2) 1 2 Handout #2 (highlights, questions) Things to learn about: flow charts for design Only 5 symbols (subroutine not shown) Flow charts
More informationLENORD. +BAUER... automates motion. PowerDRIVE-Positioning GEL 6109 Compact positioning drive for installation situations with limited space
PowerDRIVE-Positioning GEL 6109 Compact positioning drive for installation situations with limited space LENORD +BAUER... automates motion. Technical information Version 2014-09 General The PowerDRIVE-Positioning
More informationTRUCK MOUNTED KNUCKLE BOOM HYDRAULIC CRANE PROPOSAL
TRUCK MOUNTED KNUCKLE BOOM HYDRAULIC CRANE PROPOSAL CUSTOMER : - SUPPLIER: CONTACT PERSON: DATE: E-mail: VALIDITY: Dear In the attached file you will find the Proposal and specification(s) for the ASK
More information