ANLI REVERSIBLE HEAT PUMP WITH INVERTER WELL-BEING WITH LOWEST ENERGY CONSUMPTIONS

Transcription

1 REVERSIBLE HEAT PUMP WITH INVERTER WELL-BEING WITH LOWEST ENERGY CONSUMPTIONS Air-cooled axial fans Scroll compressors R410A Cooling capacity 5,7-28,8kW Heating capacity 6,1-33,8kW

2 ANLI INVERTER Greater wellbeing, lower energy consumption designed for use with all terminals (radiant heating panels, fan coils and radiators) and able to produce domestic hot water manages variable water flow systems (also available with inverter-driven pump): to save more than 50% on pumping costs Traditional ON-OFF Chiller ANLI reduces heating costs by up to 30% compared with traditional systems (condensing boilers) lower weight and smaller dimensions thanks to the use of refrigerant R410A and absence of the storage tank greater climate and acoustic comfort Inverter axial fan (for size up 040H to 080H) -20% Reduction in carbon dioxide emissions (carbon dioxide contributes to the Greenhouse effect) Annual savings in terms of electricity consumption Compared with traditional ON-OFF systems The Aermec ANLI series meets the specifications for the environmentally friendly design of fan motors (REGULATION (EU) No 327/2011). ANLI H ANLI101H

3 FAN COILS Living area and Sleeping area ON ANLI Traditional ON-OFF Chiller 2000 Watt 2000 Watt Electricity consumption adjusts instantly on demand. Thanks to the inverter technology, the power needed for heating or cooling is modulated, meaning that electrical consumption is in continuous change. In this way, it becomes even easier to manage many simultaneous electrical loads, whilst avoiding exceeding the maximum electricity consumption allowed under the electricity provider s contract. FAN COILS Living area ON ANLI Traditional ON-OFF Chiller 2000 Watt 1200 Watt

4 -20 C ANNUAL SAVINGS IN ELECTRICITY CONSUMPTION COMPARED WITH TRADITIONAL ON-OFF SYSTEMS -50 C THE NOISE LEVEL REDUCTION, AT APPROX. 3 DB (A), ESPECIALLY APPRECIATED DURING NIGHT-TIME OPERATION -20% REDUCTION IN CO 2 EMISSIONS (CARBON DIOXIDE CONTRIBUTES TO THE GREENHOUSE EFFECT) LOWER BILLS Thanks to the Inverter technology, the electrical brushless DC motor with permanent magnets and the electronic thermostatic valve, the heat pumps and chillers of the ANLI series are able to modulate continuously the power needed for heating and cooling from 35% to 100%. This makes it possible to adjust, whenever necessary, the power supplied, as requested by system sensors. The result is an energy saving in summer and winter climate control and in the production of domestic hot water, of roughly 20% on average, compared with the traditional ON-OFF series. That s the same as saying for every 100 Euro of electricity consumed by a traditional ON-OFF heat pump, the inverter-driven ANLI heat pump produces a net saving of a healthy 20 Euro! NIGHT-TIME SILENCE ANLI Inverter è ANLI Inverter was designed with a particular focus on silent operation. Its success is thanks to the choice of high quality acoustic components and to continuously monitoring appliances in both the development phase as well as in the testing phase in the Research and Development department s sophisticated semi-anechoic chamber. Under nominal conditions the ANLI Inverter series is, on average, quieter than the ON-OFF series, but what really makes the difference is the change in the noise level in response to a change in load. While a traditional On-Off appliance always emits the same level of noise, the ANLI Inverter series gradually reduces the noise it makes as the power required decreases. This brings a significant benefit during night-time operation, when the load is naturally reduced and the need for silence is considerably greater compared with daytime hours. Under these conditions, a reduction of 3 db(a) can effectively be achieved, which corresponds to half the level of noise of a traditional ON-OFF ANL. Temperature of the water produced ( C) Chillers / heat pumps ON-OFF ANLI Inverter Set point Time (s)

5 +20% THE INCREASE IN SEASONAL ENERGY EFFICIENCY (ESEER-EUROPEAN SEASONAL ENERGY EFFICIENCY RATIO) COMPARED WITH NORMAL ON-OFF WATER CHILLERS -70% THE REDUCTION IN START-UP POWER DEMAND COMPARED WITH RANGES WITH ON-OFF COMPRESSORS -25% THE AVERAGE REDUCTION IN WEIGHT AND DIMENSIONS COMPARED WITH TRADITIONAL RANGES LOWER WEIGHT AND SMALLER DIMENSIONS The use of the specific high energy fluid refrigerant R410A and absence of water storage make the ANLI Inverter smaller and lighter compared to the equivalent ON-OFF series with storage. RESPECT FOR THE ENVIRONMENT Thanks to greater energy efficiency and the use of fluid refrigerant R410A, harmless to the stratospheric ozone layer, the ANLI Inverter series is environmentally friendly. R410A is also a fluid with high thermodynamic efficiency and this makes it possible, together with use of the Inverter, to reduce CO2 emissions. Totting up the savings in terms of summer climate control, winter heating and the production of domestic hot water, in comparison with the use of an ON-OFF heat pump, CO2 emissions fall by 20%. DOMESTIC HOT WATER The ANLI Inverter can produce hot water even when the external environmental temperature falls to -20 C. The temperature of the water produced can even reach 60 C in summer, and that makes it possible to use the ANLI Inverter all year round to produce domestic hot water and to heat a swimming pool.

6 SILENT COMFORT FAN COILS Sleeping area ON Traditional ON-OFF Chiller 30dB(A) ANLI 27dB(A) VARIATION OF THE NOISINESS AT LOAD CHANGE Under nominal conditions the ANLI Inverter series is, on average, quieter than the ON-OFF series, but what really makes the difference is the change in the noise level in response to a change in load. While a traditional On-Off appliance always emits the same level of noise, the ANLI Inverter series gradually reduces the noise it makes as the power required decreases. This brings a significant benefit during night-time operation, when the load is naturally reduced and the need for silence is considerably greater compared with daytime hours. Research and innovation are essential prerequisite in order to maintain the leadership in the global market and Aermec, which holds this position, has always distinguished itself for the cutting-edge solutions of its products. The innovative capacity and constant attention to research in order to meet market needs and trends, as well as anticipating the demands, are developed through highly skilled staff but also through the co-operation with prestigious universities and teachers of subjects related to air-conditioning. The devices of the future are developed and designed within the modern Aermec laboratories, equipped with sophisticated and constantly updated equipment, such as the new semi-anechoic chamber of the Research and Development Department.

7 Technical Data - ANLI 021H - 101H ANLI u.m. Version 021H 025H 026H 040H 045H 071H 075H 080H 101H F3 F2 F1 H 6,58 7,58 8,16 10,51 12,94 16,17 18,57 21,03 20,87 25,34 33,75 Heating Capacity (kw) HP 6,52 7,50 8,08 10,41 12,81 15,98 18,35 20,78 20,32 24,65 33,01 HX 6,48 7,46 8,03 10,37 12,76 15,95 18,35 20,82 20,32 24,65 33,01 H 1,63 1,96 2,07 2,68 3,55 4,08 5,09 6,13 5,44 7,05 9,85 Total input power (kw) HP 1,66 1,97 2,07 2,67 3,51 4,04 5,02 6,03 5,46 7,06 9,86 HX 1,59 1,90 2,00 2,60 3,44 3,92 4,94 5,99 5,46 7,06 9,86 H 4,03 3,87 3,94 3,92 3,64 3,97 3,64 3,43 3,84 3,59 3,43 COP (W/W) HP 3,93 3,81 3,88 3,90 3,65 3,96 3,65 3,45 3,72 3,49 3,35 HX 4,07 3,93 4,00 3,99 3,71 4,07 3,71 3,48 3,72 3,49 3,35 H 6,23 7,31 7,79 9,92 12,75 15,16 17,60 20,12 20,08 24,95 31,7 Heating Capacity (kw) HP 6, ,72 9,82 12,62 14,99 17,39 19,89 19,54 24,3 31,0 HX 6,14 7,20 7,68 9,78 12,57 14,94 17,38 19,91 19,54 24,3 31,0 H 1,93 2,33 2,45 3,17 4,23 4,85 6,07 7,27 6,36 8,34 11,4 Total input power (kw) HP 1, ,46 3,16 4,19 4,82 6,01 7,19 6,38 8,35 11,45 HX 1,90 2,28 2,40 3,09 4,12 4,70 5,92 7,13 6,38 8,35 11,45 H 3,23 3,14 3,18 3,13 3,02 3,13 2,90 2,77 3,16 2,99 2,78 COP (W/W) HP 3,14 3,09 3,13 3,11 3,01 3,11 2,89 2,77 3,06 2,91 2,71 HX 3,23 3,16 3,20 3,16 3,05 3,18 2,94 2,79 3,06 2,91 2,71 H 5,71 6,42 7,26 9,39 12,25 13,66 16,35 18,51 20,03 23,95 28,77 Cooling Capacity (kw) HP 5,75 6,49 7,33 9,48 12,37 13,82 16,55 18,73 20,23 24,53 29,43 HX 5,79 6,53 7,37 9,52 12,42 13,88 16,58 18,73 20,23 24,53 29,43 H 1,94 2,42 2,58 3,17 4,37 4,80 6,16 7,63 6 8,14 11,73 Total input power (kw) HP 1,98 2,44 2,59 3,17 4,34 4,79 6,11 7,55 5,8 8,31 11,82 HX 1,91 2,37 2,53 3,10 4,27 4,66 6,00 7,47 5,8 8,31 11,82 H 2,95 2,65 2,82 2,97 2,80 2,84 2,66 2,43 3,34 2,94 2,45 EER (W/W) HP 2,91 2,66 2,83 2,99 2,85 2,89 2,71 2,48 3,49 2,95 2,49 HX 3,03 2,75 2,92 3,07 2,91 2,98 2,76 2,51 3,49 2,95 2,49 H 4,15 3,54 4,10 4,06 4,10 4,20 4,17 4,12 4,11 4,11 4,11 ESEER HP 4,11 3,60 4,29 4,22 4,40 4,19 4,33 4,34 4,40 4,40 4,40 HX 4,38 3,91 4,54 4,36 4,47 4,65 4,65 4,59 4,40 4,40 4,40 Sound data Sound power db(a) 62,0 68,0 63,5 66,7 67,7 67,7 69,0 69,0 Sound pressure db(a) 31,0 37,0 32,5 35,7 36,7 36,7 38,0 38,0 Power supply V/ph/Hz 230V/1 230V/1 230V/1 230V/1 230V/1 400V/3 400V/3 400V/3 400V/3 IN HEATING MODE Data declared in accordance with the standard UNI EN 14511:2011 FLOOR HEATING - Water inlet temperature 30 C - Water outlet temperature 35 C - External air temperature b.s. 7 C / b.u. 6 C - T 5 C FAN COILS - Water inlet temperature 40 C - Water outlet temperature 45 C - External air temperature b.s. 7 C / b.u. 6 C - T 5 C IN COOLING MODE - Water inlet temperature 12 C - Water outlet temperature 7 C - External air temperature 35 C - T 5 C Sound power: Aermec determines sound power values on the basis of measurements made in accordance with UNI EN ISO , as required for Eurovent certification. Sound pressure: Sound pressure in free field, at 10 m distance from the external surface of the unit (in accordance with UNI EN ISO 3744). Data declared in accordance with the standard UNI EN 14511:2011 for the model ANLI 101H the compressor control range is wider than previous models, the following data is provided in the declaration of performance: Frequency f1 maximum performance Frequency f2 performance compliant with french standard nf 414 Frequency f3 intermediate performance Aermec adheres to the EUROVENT Certification Programme: LCP The products concerned appear in the EUROVENT web site ANLI 021H-026H ANLI 040H-045H ANLI H-080H ANLI 101H For more information, please refer to the program selection and the technical documentation available on the website Aermec reserves the right to make all modification deemed necessary for improving the product at any time with any modification of technical data.

8 Aermec S.p.A. Via Roma, Bevilacqua (VR) - Italia Tel Fax marketing@aermec.com