Fluido idraulico Fluid. Viscosità cinematica consigliata Kinematic viscosity suggested
|
|
- John Floyd
- 7 years ago
- Views:
Transcription
1 POMPE AD INGRANAGGI FISSAGGIO 3 FORI-UNI 3 HOLES-UNI HYDRAULIC CODICE FAMIGLIA FAMILY CODE 05-0 NPH UNI Data: Lunedì 3 giugno 20 Codice fascicolo: Fluido idraulico Fluid Viscosità cinematica consigliata Kinematic viscosity suggested Minerale o sintetico compatibile con guarnizioni: Mineral or synthetic compatible with the following seals: NBR, FKM, FPM, Nylon T media ambiente ( C) < > 35 Average ambient temp. ( C) VG (cst = mm 2 /s) Viscosità cinematica ottimale di esercizio Optimale kinematic viscosity Viscosità cinematica max consentita all avviamento Max kinematic viscosity suggested at the start-up Indice di viscosità consigliato Viscosity index suggested VI > 00 Grado di filtrazione Oil filtering Pressione di aspirazione Inlet pressure Senso di rotazione Pump rotation Temperatura di esercizio Working temperature VG= 0 cst 00 cst VG= 750 cst -5 C +00 C > 200 bar: 0 μm < 200 bar: 25 μm -0,3 2 bar Unidirezionale (DX o SX) Unidirectional (Right or Left) Codice foglio: Rev: AE Tipo pompa Pump type Destra Right Rotazione Rotation IN OUT Sinistra Left pag.27 OUT 2 Via Cave, 7/ Provaglio d Iseo (Brescia) Italy Tel.: A B Peso Weight ISO 228 ISO 228 ISO 228 mm mm Kg NPH G /2 NPH G / NPH NPH G 3/ NPH NPH G 3/4 NPH G NPH NPH NPH G /4 NPH G G 3/ NPH
2 NPH UNI 7-82 Kit guarnizioni / Seal Kit Codice foglio: Rev: AE Data: Lunedì 3 giugno 20 Codice fascicolo: pag.28 Via Cave, 7/ Provaglio d Iseo (Brescia) Italy Tel.:
3 Via Cave, 7/ Provaglio d Iseo (Brescia) Italy Tel.: pag.29 Codice foglio: Rev: AE Data: Lunedì 3 giugno 20 Codice fascicolo: Codice Descrizione P. Number Description Tappo Acciaio /2 Steel plug / Tappo Acciaio 3/4 Steel plug 3/ Rondella acciaio-gomma /2 Steel-rubber washer / Rondella acciaio-gomma 3/4 Steel-rubber washer 3/ Corpo pompa Gear housing Spine forate di centraggio 4x2.5 Pins 4x Boccola autolub. 28x32x30 Bushing 28x32x Guarnizione antiestrusione Back-up ring Guarnizione per rasamento Thrust plate seal Rasamento ad occhiale Thrust plate Albero dentato conduttore Drive shaft Albero dentato condotto Guarnizione OR (2x95) Driven shaft O-ring (2x95) Grano conico /8 Plug / Coperchio anteriore Mounting cover Guarnizione paraolio Oil seal Anello elastico Circlip Rondella elastica Washer Vite TCE M0x35 Screw M0x Vite TCE M0x40 Screw M0x40 6 Quantità Quantity NPH UNI
4 NPH UNI Kit guarnizioni / Seal Kit Codice foglio: Rev: AE Data: Lunedì 3 giugno 20 Codice fascicolo: pag.30 Via Cave, 7/ Provaglio d Iseo (Brescia) Italy Tel.:
5 Codice foglio: Rev: AE Data: Lunedì 3 giugno 20 Codice fascicolo: Codice P. Number Descrizione Description Tappo Acciaio 3/4 Steel plug 3/4 Quantità Quantity NPH UNI Rondella acciaio-gomma 3/4 Steel-rubber washer 3/ Corpo pompa Gear housing Spine forate di centraggio 4x2.5 Pins 4x2.5 4 Via Cave, 7/ Provaglio d Iseo (Brescia) Italy Tel.: pag Boccola autolub. 30x34x35 Bushing 30x34x35 4 5a Boccola autolub. 30x34x30 Bushing 30x34x Guarnizione antiestrusione Back-up ring Guarnizione per rasamento Thrust plate seal Rasamento ad occhiale Thrust plate Albero dentato conduttore Drive shaft Albero dentato condotto Guarnizione OR (2x95) Driven shaft O-ring (2x95) Grano conico /8 Plug / Coperchio anteriore Mounting cover Guarnizione paraolio Oil seal Anello elastico Circlip Rondella elastica Washer Vite TCE M0x40 Screw M0x
6 NPH UNI Tipo pompa Pump type POMPE AD INGRANAGGI CARATTERISTICHE TECNICHE DI FUNZIONAMENTO / TECHNICAL FEATURES Cilindrata Displacement Pressione Pressure P P2 P3 Velocità max. continua Max. continuous speed Velocità max. intermittente Max. intermittent speed 05-0 Velocità min. Min. speed cm 3 /rev bar bar bar rpm rpm rpm NPH NPH NPH NPH NPH NPH NPH NPH NPH NPH NPH NPH P=Pressione max.continua Max. continuous pressure (00%) P2=Pressione max. intermittente Max. Intermittent pressure (20 sec.max.) P3=Pressione max. di punta Max. peak pressure (6 sec.max) SENSO DI ROTAZIONE POMPA - DIRECTION OF ROTATION: Rotazione antioraria, pompa sinistra Anti-clockwise rotation, left pump Rotazione oraria, pompa destra Clockwise rotation, right pump Data: Lunedì 3 giugno 20 Codice fascicolo: Baricentro Center of mass MOMENTO PESO / MASS MOMENT s G M amm. = s x G (Nm) G=Peso in N (Peso in Kg x 9.8) G=Weight in N (Weight in Kg x 9.8) PER MODIFICARE IL SENSO DI ROTAZIONE VEDERE ISTRUZ TO CHANGE THE DIRECTION OF ROTATION SEE INSTRUCTION pag.32 Via Cave, 7/ Provaglio d Iseo (Brescia) Italy Tel.: Tipo pompa - Pump type s NPH-7 93 NPH NPH NPH NPH-43 0 NPH-5 03 NPH-6 06 NPH-73 0 NPH-82 3 NPH NPH NPH Codice foglio: Rev: AE
SMT8B pump series. Applications / applicazioni. www.comoso.com. Flow media/fluidi
SMT8B pump series Settima designs and manufactures hydraulic 3 screw pumps and helical rotors pumps. Settima screw pumps, coupled together with external or immersed motors, run quietly and with no pulsations,
More informationcatalogo ricambi spare parts catalogue Rev. 0 del 01.01.2009 BR / D
BR / D pag. 104 BR / P BR pag. 105 BR / H pag. 106 BR CON CURVE DI ASPIRAZIONE E MANDATA (BR AVEC COURBES D ASPIRATION ET REFOULEMENT / BR WITH SUCTION AND DELIVERY ELBOWS / BR MIT SAUGEN UND GEISTUNG
More informationFCAT08-03-D cross reference - 23 - Serie compressore Compressor series
FCAT08-03-D cross reference 85 83 84 86-23 - 53 52 51 70 69 68 28 67 66 2 110 104 105 103 101 154 78 25 82 81 151 150 149 148 95 147 27 88 89 91 93 77 152 96 153 111 102 55 64 54 63 35 134 133 132 130
More informationORIGIN OF NOISE AND VIBRATIONS KNOCKED DOWN BY CONTINUUM PUMP LA POMPA CONTINUUM HA ELIMINATO LE ORIGINI DEL RUMORE E DELLE VIBRAZIONI
Continuum pump Achieves better efficiency, lower production cost, better life quality for the industrial world. Ottiene alti livelli di efficienza, ridotti costi di produzione ed una migliore qualità del
More informationPDP and SD Series Pump Station
PDP and SD Series Pump Station 1 THE COMPANY SEIM, after 35 years of production, have achieved a leading position in the screw pump market world wide. Our high volume production of market leading products(more
More informationGO SILENTLY AT HIGH PRESSURE & HIGH SPEED
GO SILENTLY AT HIGH PRESSURE & HIGH SPEED INDUSTRIAL CONTINUUM Series Helical rotor pumps for high pressure and no noise application MOBILE The new generation of gear pumps for NO PULSATION & NO NOISE
More informationFIXED DISPLACEMENT HYDRAULIC VANE PUMPS BQ SERIES
BQ FIXED DISPLACEMENT HYDRAULIC VANE PUMPS BQ SERIES Versatility, power, compactness and low running costs are the main characteristics of B&C vane pumps. All the components subject to wear are contained
More informationFIXED DISPLACEMENT HYDRAULIC VANE PUMPS BQ SERIES
BQ FIXED DISPLACEMENT HYDRAULIC VANE PUMPS BQ SERIES Versatility, power, compactness and low running costs are the main characteristics of B&C vane pumps. All the components subject to wear are contained
More informationFIXED DISPLACEMENT HYDRAULIC VANE PUMPS BQ SERIES
BQ FIXED DISPLACEMENT HYDRAULIC VANE PUMPS BQ SERIES Versatility, power, compactness and low running costs are the main characteristics of B&C vane pumps. All the components subject to wear are contained
More informationSCP 012-130 ISO. Other advantages: SCP 012-130 ISO is a series of piston pumps with a fixed displacement for mobile and stationary hydraulics.
SCP 012-130 ISO is a series of piston pumps with a fixed displacement for mobile and stationary hydraulics. SCP 012-130 ISO covers the entire displacement range 12-130 cmᶟ rev. at a maximum pressure of
More informationPINZE E DISCHI FRENO PER APPLICAZIONI INDUSTRIALI CALIPERS AND BRAKE DISCS FOR INDUSTRIAL APPLICATIONS
PINZE E DISCHI FRENO PER APPLICAZIONI INDUSTRIALI CALIPERS AND BRAKE DISCS FOR INDUSTRIAL APPLICATIONS EUROCAR Togliani s.r.l. EUROCAR TOGLIANI s.r.l. Via Monte Ortigara 2A/2B - 20010 Bareggio (Milano)
More informationPUMP AND MOTOR DIVISION
INSTALLATION MANUAL SERIES P2 and P3 MOBILE PISTON PUMP 1 Check model code / compare with your paper work Nameplate of the pump Ordering / Sales Acknowledgement 2 Check rotation of the pump Clockwise rotation
More informationBD1 TABELLA DI PERFORMANCE PERFORMANCES TABLE BD1 100 25 100 54 175 45 250 60
BD1 BD1 TABELLA DI PERFORMANCE PERFORMANCES TABLE Max Min Max Min Max Min Max Min BD1 100 25 100 54 175 45 250 60 Displacement / Cilindrata [cc/rev] 99 25 102 54 172 43 243 61 Bore / Alesaggio [mm] 28
More informationHTM PUMPS PP-PVDF Non-metallic mag drive centrifugal pumps
HTM S PP-PVDF Non-metallic mag drive centrifugal pumps POMPE HTM PP-PVDF Pompe centrifughe in materiale termoplastico FEATURES: Materials in contact with the liquid: Casing and impeller: PP/PVDF; O-ring:
More informationFDX 2 Loncin Complessivo Macchina
Loncin Complessivo Macchina 0/50-2/70-2/200 Frame and Chassy (Assembly) 6525 03 Pump BXD 3025G 2/70 7 3605 0092 Vite Speciale Special Screw M8x45 4 6525 035 Pump BXD 3530G 2/200 8 28 0004 Rondella Washer
More informationCatalogo Parti Di Ricambio Spare Parts List
Catalogo Parti Di Ricambio Spare Parts List ASSALE.M FR.M FR AXLE REF. - st EDITION: April / 0 REVISION DATE: July / 0 - CM P/N: CA AXLE.M FR REF. - Indice Index.0. Corpo assale Axle housing.0.0 Calotte
More informationPRODUCT CARD GEAR PUMPS AND MOTORS ORS GROUP 1 E0.14.0503.02.01 TM GEAR PUMPS AND MOTORS GROUP 1 INDEX Page 1 - GENERAL INDEX Page 2 - Features - Quick guide Page 3 - Features - General - Working conditions
More informationVARIABLE DISPLACEMENT AXIAL PISTON PUMPS. For truck applications
VARIABLE DISPLACEMENT AXIAL PISTON PUMPS For truck applications TVP FEATURES Variable displacement axial piston pumps swash plate design ideally suited for open circuit truck applications. The compact
More informationHTM PP/PVDF Thermoplastic mag drive centrifugal pumps HTM PP/PVDF Pompe centrifughe a trascinamento magnetico in materiali termoplastici
www.gemmecotti.com HTM / Thermoplastic mag drive centrifugal pumps HTM / Pompe centrifughe a trascinamento magnetico in materiali termoplastici FEATURES Mag drive centrifugal pumps series HTM / are made
More informationCatalogo Parti Di Ricambio Spare Parts List Catalogue Pieces De Rechange Ersatzteilkatalog
Catalogo Parti Di Ricambio Spare Parts List Catalogue Pieces De Rechange Ersatzteilkatalog ASSALE.M AXLE.M ESSIEU.M ACHSE.M REF. st EDITION 0/' REVISION DATE 00 P/N: CA0 AXLE.M REF. INDEX INDICE INDEX
More informationOperating Instructions Parts List Manual Scissor Lift Pallet Truck
Operating Instructions Parts List Manual Scissor Lift Pallet Truck Note: Operator MUST read and understand this operating instructions before use this Hand Scissor Lift. Thank you for using this hand scissors
More informationDRS/A40-115-1.1M GRINDER. Q = Portata / Flow rate / Débit Modello l/min 75 120 180 225 240 270 Model m Modèle
DRS/A40-115-1.1M S.C. 07/13 DRS/A40-115-1.1M CURVE DI PRESTAZIONE PERFORMANCE CURVES COURBES DE PERFORMANCE TABELLA PRESTAZIONI PERFORMANCE TABLE TABLEAU DE PERFORMANCES Q = Portata / Flow rate / Débit
More informationPNEUMATIC TOGGLE SWITCHES
CONTROLS PNEUMATIC TOGGLE SWITCHES AIR00* SERIES Single Control Part No Kit No (indludes airline & fi ttings) 100.1.24 AIR001 Twin 100.1.42 AIR002 Triple 100.1.60 AIR003 Quad 100.1.122 AIR004 18/07/2008
More informationComponenti Spare parts... 22-29
NCE/CONTENTS logia pompe Pump range... 2-19 Pompe Special... 2 Special pump type... 2 Pompe Special con frizione magnetica... 4 Special pump type with magnetic clutch...4 Pompe Nautic....6 Nautic pump
More informationCatalogo Parti Di Ricambio Spare Parts List
Catalogo Parti Di Ricambio Spare Parts List ASSALE.M AXLE.M REF. st EDITION 0/0 REVISION DATE 00/00 P/N: CA AXLE.M ref INDEX INDICE INDEX.0.0 Corpo assale Axle housing.0.0 Coppia conica Bevel gear/pinion
More informationYFC... II 2(1) GD Ex d IIC T6 Ex td A21 IP 66/67 T85 C. IECEx SIR 07.0104 94/9/CE EN 60079-0 - EN 60079-1 - EN 61241-0 - EN 61241-1.
Finecorsa ESECUZIONE ANTIEFLAGRANTE II 2(1) G Ex d IIC T6 Ex t A21 IP 66/67 T85 C Limit switches EX COE CERTIFICAZIONE SIRA 07 ATEX 1316 CERTIFICATE IECEx SIR 07.0104 IRETTIVA 94/9/CE IRECTIVE NORME INSTALLAZIONE
More informationVariable Displacement Pump AA10VSO
Variable Displacement Pump AA10VSO Series 31, Industrial Model, for Open Circuits Axial piston, swashplate design Brueninghaus Hydromatik Sizes 28...140 Nominal pressure 4000 psi Peak pressure 5100 psi
More informationSERIES FRI. Maximum working pressure 20 bar Flow rate to 1200 l/min. s.p.a
SRIS FRI Maximum working pressure bar Flow rate to 1 l/min s.p.a R FRI series filter has been disigned and developed to satisfy the demands pf applications, on return or low preessure line in Hydraulic
More informationDETT. B SEZ. A-A. Revision 1: Revisione particolari; revisione distinta - Parts and BOM revision
Revision : Revisione particolari; revisione distinta Parts and BOM revision A DETT. B B A SEZ. AA \\ServerHero\solid\Progetti e Lavori STAN\000 Std STAN\SE\PDM\PDM0\PDM0.000.D.dft D Drawer Disegnatore
More information2011 DC Electropumps Bull. Rotation Ø 15 6,45 3,5 5,7
Ø 5 ±. DC Electropumps Bull,5 Rotation,5 5,7 Email: sales@hydronit.com Fax B... Electro pumps Bull series MODEL CODE EPB,5 DC /S5 K, V** Electro Pump Bull series Gear pump displacement (cc/rev (see tables
More informationThe SF2 series are designed for reservoir side-wall mounting applications, suitable for flow rates to 850 l/min and filtration from 25 to 250 micron.
D e s c r i p t i o n 500 The SF2 series are designed for reservoir side-wall mounting applications, suitable for flow rates to 850 l/min and filtration from 25 to 250 micron. A major feature of these
More information2 0 1 0 S O C K E T S & P L U G S
0 1 0 S O C K E T S & P L U G S eurolites.it PRESA-SPINE POLI - 6-1-V SOCKET-PLUGS POLES - 6-1-V PRESA POLI 6-1-V - 16 A - CORPO IN PLASTICA POLES SOCKET 6-1-V - 16 A - PLASTIC HOUSING SYSTEM ACCORG 8.800.00
More informationGUARNIZIONI PRINCIPALI / KIT - MAIN GASKETS / SET
GUARNIZIONI PRINCIPALI / KIT - MAIN GASKETS / SET MOTORE / ENGINE: 840.67F Dati tecnici: / Technical data: N Cyl: 4 L Ø 93.00 mm Cilindrata/Capacity: 2500 cc Aspirato/Aspirated Montato su: / Fitting on:
More informationPRODUCT CARD GEAR PUMPS AND MOTORS ORS GROUP 3 E0.17.0703.02.01 TM GEAR PUMPS AND MOTORS INDEX Page 1 - GENERAL INDEX Page 2 - Features - Quick guide Page 3 - Features - General - Working conditions -
More informationRickmeier Solutions. Gear pumps for superior Lubrication
Rickmeier Solutions Gear pumps for superior Lubrication P U M P E N T E C H N O L O G I E #1. Introduction Position and significance of Rickmeier products Rickmeier supplies pumps, valves and systems for
More informationContenitori Enclosures
- 19 - Contenitori Enclosures Contenitori in materiale termoplastico per ausiliari di comando Ø 22 Thermoplastic enclosures suitable for control units Ø 22 Dati tecnici generali / General Technical Data
More informationPN 10 - Art. A020 TIS PN 16 - Art. A021 TIS
- Art. A00 TIS - Art. A0 TIS SARACINESCA CUNEO GOMMATO / CORPO PIATTO / SHORT EN - SERIE DN G K D L H n-d b M S Peso Weight 0 0 0 0 -ø -ø 00. 0 0 -ø -ø 00. 0 -ø -ø. 0 00 0 -ø -ø. 0 0 0 0 -ø -ø. 0 00 -ø
More informationAIR WORK CILINDRI ISO 15552- SERIE CY CYLINDERS ISO 15552- CY SERIES 1.37 CHIAVE DI CODIFICA / ORDERING CODE CY 00 1 000 0000. Attuatori / Actuators
- SEIE CY - CY SEIES I cilindri serie CY di Airwork sono realizzati rispettando la normativa ISO 15552 ed hanno alesaggi compresi tra 32 e 125 mm. Doppio effetto, ammortizzati e magnetici sono indicati
More informationRadial piston pumps type R and RG
Radial piston pumps type R and RG Operating pressure p max = 700 bar Delivery flow Q max = 91.2 lpm (at 1450 rpm) Geometric displacement V g max = 64.2 cm 3 /rev. 1. General Motor pumps and hydraulic power
More informationPPS-PPQ-BT-PIAS RESIN INSULATORS FOR OIL INSULATED ELECTRICAL MACHINES
PPS-PPQ-BT-PIAS RESIN INSULATORS FOR OIL INSULATED ELECTRICAL MACHINES BUSHING WITH PLUG CONNECTION WITH OUTER CONE PPS CHARACTERISTICS The PPS bushing can be used as a fixed section for the entry of medium
More informationGUARNIZIONI PRINCIPALI / KIT - MAIN GASKETS / SET
GUARNIZIONI PRINCIPALI / KIT - MAIN GASKETS / SET MOTORE / ENGINE: 8280.42S Dati tecnici: / Technical data: N Cyl: 8 V Ø 45.00 mm Cilindrata/Capacity: 774 cc Turbo Intercooler Montato su: / Fitting on:
More informationTaglierina a lama rotante Rotary Trimmer Rogneuse Roll + Schnitt Cisailles
Taglierina a lama rotante Rotary Trimmer Rogneuse Roll + Schnitt Cisailles ProSource Packaging, Inc. 14911 Stuebner Airline Suite A Houston, TX 77069 800-203-0233 www.machine-solution.com LISTA PARTI DI
More informationOUT. The SF2 series suction filter are designed for reservoir side-wall applications. This completely new design of filter allows the filter
D e s c r i p t i o n 250 The SF2 series suction filter are designed for reservoir side-wall applications. This completely new design of filter allows the filter within the filter preventing oil loss from
More information350G48 STD Gravity slicer Affettatrice a gravità
350G48 STD Gravity slicer Affettatrice a gravità Tab.1 - BASE-TRASMISSION-BLADE/CASSA-TRASMISSIONE-LAMA... 2 Exploded diagram Esploso (Tab.1)... 2 Part list Elenco parti (Tab.1)... 3 Tab.2 MEAT TABLE/PIATTO...
More informationSteering unit. Table of contents. Features RE 11872/05.06. Type LAGL. Frame sizes 500 to 1000 Component series 1X Maximum flow 80 l/min
Steering unit RE 11872/05.06 /10 Type LAGL Frame sizes 500 to 1000 Component series 1X Maximum flow 80 l/min H7375 Table of contents Contents Page Features 1 Ordering code 2 Function, section 3 Device
More informationSCHEDA PRODOTTO KAWASAKI Z 750 LINEA SPORT- TERMINALI 2007 >
SCHEDA PRODOTTO KAWASAKI Z 0 00 > LINEA SPORT- TERMINALI KAWASAKI Z 0 00 > SPORT- TERMINALI Kit Allestimento Forma Passaggio Omologato Prezzo (iva esc.) K.0.LS CARBONIO GP,00 K.0.LS TITANIO GP,00 K.0.LC
More information3/2- and 2/2-way cartridge valve type BVE
3/2- and 2/2-way cartridge valve type BVE for any flow direction, zero leakage, all ports pressure resistant Flow Q max = 70 lpm Perm. pressure p max = 400 bar Additional valves with same function: ' Type
More informationFixed displacement vane pumps
Fixed displacement vane pumps RE 1335/1.5 Replaces: 11.2 1/22 Types PVV and PVQ Nominal sizes 18 to 193 Series 1X Maximum operating pressure 21 bar Maximum displacement 18 to 193 cm 3 Doppelpumpe_d_ Double
More informationCARATTERISTICHE TECNICHE / TECHNICAL SPECIFICATIONS. Temperatura di impiego Operative temperature. Passaggio nominale Nominal diameter
SERIE SMS 3.3..C4. CODICE DI ORDINAZIONE / DECODING TRE UTILIZZI 3.3..C4.. 040. XX THREE SECTIONS Comando Pneumatico Pneumatic Control SEZIONI/ STAGES CODICE BASE/BASIC CODE POSSIBILI VERSIONI/AVAILABLE
More informationMOLTIPLICATORE PER ACCOPPIAMENTO TRATTORE
M.-P.T.O. MOLTIPLICATORE PER ACCOPPIAMENTO TRATTORE OVERGEAR FOR TRACTOR COUPLING MULTIPLICATEUR POUR ACCOUPLEMENT TRACTEUR ÜBERSETZUNGSGETRIEBE FÜR TRAKTORKUPPLUNG ISTRUZIONI D USO OPERATING INSTRUCTIONS
More information- CONSTRUCTIONS 300 SECTIONAL VIEW 300 MECHANICAL SEAL 301 - DIMENSIONS AND WEIGHT 400 PUMP 400 PACKING 401
CONTENTS Page - SPECIFICATIONS 200 SELECTION CHART 201 TYPE KEY AND CURVE SPECIFICATIONS 202 PERFORMANCE CURVE 70 204 PERFORMANCE CURVE 90 205 PERFORMANCE CURVE 120 206 PERFORMANCE CURVE 200 207 - CONSTRUCTIONS
More informationProduktkatalog (GB/IT)
www.abag.de info@abag.de 201003 Produktkatalog (GB/IT) Manometer und Zubehör Kompetenz für Anlagenbau, Betriebstechnik, Automatisierungstechnik, Globalservice Engineering und Serviceleistung Werksanschrift:
More informationOMAL S.p.A. Headquarters: Via Ponte Nuovo 11, 25050 Rodengo Saiano Brescia Italy Production Site: Via San Lorenzo 70, 25069 Villa Carcina Brescia
1 OMAL S.p.A. Headquarters: Via Ponte Nuovo 11, 25050 Rodengo Saiano Brescia Italy Production Site: Via San Lorenzo 70, 25069 Villa Carcina Brescia Italy Ph: +39 0308900145 Fax: +39 0308900423 www.omal.it
More informationPRODUCT SHEET APRILIA RSV 1000 LINE SPORT - SLIP ON SYSTEMS 2004 > 2008
PRODUCT SHEET APRILIA RSV 000 00 > 008 LINE SPORT - SLIP ON SYSTEMS APRILIA RSV 000 00 > 008 SPORT - SLIP ON SYSTEMS Kit Type Shape Level Homologated A.00.LX SLIP-ON SMALL STAINLESS STEEL A.00.LC SLIP-ON
More informationDUAL FUEL BURNERS GAS/HEAVY OIL
M A D E I N I TA LY SERIE KN 750/M_1000/M EL DUAL FUEL BURNERS GAS/HEAVY OIL BRUCIATORI MISTI GAS/OLIO COMBUSTIBILE All purpose heating solutions Soluzioni integrate per il riscaldamento All purpose heating
More informationFluid Level Gauge Fluid Level Sensor Temperature Switch FSA / FSK / TS
Fluid Level Gauge Fluid Level Sensor Temperature Switch FSA / FSK / TS up to size 381; to PN 0.5; to T = 80 C 1. Description 1.1. General FSA fluid level gauges, FSK fluid level sensors and TS temperature
More informationGRUPPI TRATTAMENTO ARIA FRL GROUPS
5 GRUPPI TRTTMENTO RI FRL GROUPS GRUPPO LFMTIC GRUPPI TRTTMENTO RI serie XR-S FRL GROUPS series XR-S I gruppi trattamento aria onesi Pneumatik sono dispositivi atti alla preparazione dell aria compressa,
More informationA10VSO Nominal size 18 see RD 92712 A10VSO Nominal size 28...140 see RD 92711
A10VO Nominal size 18 see RD 92712 A10VO Nominal size 28...140 see RD 92711 The variable displacement axial piston pump A10VO in swashplate design was designed for hydrostatic drives in open circuits.
More informationRPT SIGMA PUMPY HRANICE ROTARY LOBE DISPLACEMENT PUMPS 426 2.98 23.01
SIGMA PUMPY HRANICE ROTARY LOBE DISPLACEMENT PUMPS RPT SIGMA PUMPY HRANICE, s.r.o. Tovární 605, 753 01 Hranice, Czech Republic tel.: +4 581 661 111, fax: +4 581 602 587 Email: sigmahra@sigmahra.cz 426
More informationZOP, ZOT SIGMA PUMPY HRANICE GEAR PUMPS 426 1.99 21.04
SIGMA UMY HRANICE GEAR UMS SIGMA UMY HRANICE, s.r.o. Tovární 605, 753 01 Hranice, Czech Republic tel.: +420 581 661 111, fax: +420 581 602 587 Email: sigmahra@sigmahra.cz, 426 1.99 21.04 Application In
More informationDXPE*J 85 320/215 ED. DIRECtIONAL CONtROL VALVE PILOt OPERAtED, WItH OBE AND FEEDBACK. Q max (see performance table) SERIES 30
85 320/215 ED DXPE*J DIRECtIONAL CONtROL VALVE PILOt OPERAtED, WItH OBE AND FEEDBACK SUBPLAtE MOUNtINg DXPE5J CEtOP P05 DXPE5RJ ISO 4401-05 (CETOP R05) DXPE7J ISO 4401-07 (CETOP 07) DXPE8J ISO 4401-08
More informationCILINDRI ISO 6432 CYLINDERS ISO 6432
AI WOK I microcilindri AIWOK sono realizzati secondo le normative europee DIN/ISO 6432 ed hanno alesaggi compresi tra 8 e 25 mm. Le testate sono fissate alla camicia mediante rullatura. Sono realizzabili
More informationChapter 5: Flow Valves
Catalogue HY11-300/UK Contents Chapter : Flow Valves Series Description Size Mounting Page Parker Standard DIN / ISO 1/4 3/8 1/2 3/4 1 06 10 16 Throttle valves, manual adjustment MVI -2 NS -4 FS With free
More information2-way flow control valve Type 2FRM 6
RE /0.0 Replaces:.0 -way flow control valve Type FRM Nominal size Series X Maximum operating pressure bar ) Maximum flow L/min ) When used in conjunction with a rectifier plate up to 0 bar H//D /97 + H//D
More informationKupplungs Ersatzteilliste
Kupplungs Ersatzteilliste 001 MG 001/35-45 Gruppo frizione antisaltellamento per Ducati Ducati slipper clutch kit Part Number Price in 001 MG 026 125 Link ring 001 MG 010 245 001 MG 018 5 Distanziale cuscinetto
More informationRx (Black / Nero) - Rx PUMP - POMPA Rx
Rx (Black / Nero) - Rx PUMP - POMPA Rx MY2010 (Left) Rx Complete pump Pompa completa Rx (Sinistra) (Right) Rx Complete pump Pompa completa Rx (Destra) Rx Complete Body pump Corpo pompa completa Rx Brake
More information2/2 and 3/2 Way Size 6 Seat Valves
2/2 and 3/2 Way Size 6 Seat Valves Directly operated Interface and subplate dimensions according to DIN 24340 and ISO Line connection port size G 3/8" Cartridge design PN [p max. ] = 315 bar 7501856.06.12.08
More informationMANTA Piston Distributor for Oil and Fluid Grease
MANTA Piston Distributor for Oil and Fluid Grease Function Piston distributors meter out and distribute the oil delivered by an intermittently actuated pump. The quantities of oil for the individual lube
More informationPOMPE ROTOMEC. ELETTROPOMPE SOMMERGIBILI Submersible pumps. IMPIEGO - Application. DESCRIZIONE - Description. DATI ELETTRICI - Electric data
POMPE ROTOMEC ELETTROPOMPE SOMMERGIBILI Submersible pumps UNI EN ISO 9-8 serie 5 TR.6 H (m) GIRANTE VORTEX - Vortex impeller 96 Giri / - R.P.M. Curve secondo ISO 996 Liv: (P).... 5 5 6 7 5 5 l/sec Q m³/h
More informationMOTORE COMPLETO/COMPLETE ENGINE KK1
MOTORE COMPLETO/COMPLETE ENGINE KK1 CODE. DM110500 DM110700 DESCRIZIONE/DESCRIPTION MOTORE KK1 STANDARD / KK1 STANDARD ENGINE MOTORE KK1 RACING / KK1 RACING ENGINE Aggiornato al 20/03/2013 / Updated on
More informationSeries TMM Axial Piston Motor. Technical Information
Series TMM Axial Piston Motor Technical Information General Description GENERAL DESCRIPTION These motors are designed primarily to be combined with other products in closed circuit systems to transfer
More informationE4E PILOT OPERATED DIRECTIONAL CONTROL VALVE WITH ELECTRIC PROPORTIONAL CONTROL SERIES 51
83 300/100 ED E4E PILOT OPERATED DIRECTIONAL CONTROL VALVE WITH ELECTRIC PROPORTIONAL CONTROL SUBPLATE MOUNTING CETOP P05 p max 250 bar Q max (see specification table) MOUNTING INTERFACE OPERATING PRINCIPLE
More informationCILINDRI SENZA STELO RODLESS CYLINDERS
Il cilindro senza stelo nasce dall esigenza di ridurre gli ingombri a parità di corsa E' fornito in diverse versioni e gli alesaggi variano da 25 a 63. I pregi principali di questo cilindro sono l'eccezionale
More informationTruck Hydraulics. Series GPA, GP1, F1, F2, T1, VP1, Fixed and Variable Displacement Pumps, Motors and Accessories
Series GPA, GP1, F1, F2, T1, VP1, Fixed and Variable Displacement Pumps, Motors and Accessories Pumps and Motors Conversion factors 1 kg... 2,20 lb 1 N... 0,225 lbf 1 Nm... 0,738 lbf ft 1 bar...14,5 psi
More informationFluid. Flu. Fluid Fluid. uid Power d Power P. Fluid Power P. Fluid Power. Fluid Power Power. d Power. Directional Cetop Valves DCV 03.
Catalogue Directional Cetop Valves DCV 03 Power Flu uid Power d Power P wer Power Power Power Power Power d Power Power Power ower Power Power wer Power Power P Power Power Powe d Power Power Power Power
More informationQPM3 Low pressure pump for circulation of oil in hydraulic and lubricating systems
The Professional Choice in Fluid Management QPM3 Low pressure pump for circulation of oil in hydraulic and lubricating systems The Olaer Group is a global player specialising in innovative, efficient system
More informationHTM SS Metallic mag drive centrifugal pumps. HTM SS Pompe centrifughe a trascinamento magnetico in metallo FEATURES
HTM SS Metallic mag drive centrifugal pumps HTM SS Pompe centrifughe a trascinamento magnetico in metallo FEATURES CARATTERISTICHE Le pompe centrifughe in metallo a trascinamento magnetico serie HTM SS
More informationHidrolik Pompalar Hydraulic Pumps
25 GRUBU ÇİFT DÖNÜŞLÜ DİŞLİ POMP 25 GROUP BI-ROTTIONL GER PUMPS PTO mili saat yönünde (SĞ) The PTO shaft is CW rotating. PTO mili saatin tersi yönünde (SOL) The PTO shaft is CCW rotating. Giriş ve çıkış
More informationIndice (Index) Cilindro 250cc MX-END (Cylinder 250cc Mx-End) Cilindro 300cc MX-END (Cylinder 300cc Mx-End) Frizione (Clutch)
Indice (Index) Tm Racing Spa Via Fano 6 61100 Pesaro ITALY Phone: +39 0721 25.113 Fax +39 0721 40.18.08 (Amministrazione) Fax +39 0721 40.66.44 (Magazzino Ricambi) Home Page: http://www.tmracing.it E-mail:
More informationSolenoid valves 2/2-way direct-operated Type EV210A
Solenoid valves 2/2-way direct-operated Type EV210A Features EV210A NC and NO Very compact valves for industrial application, such as control and dosage For water, oil, compressed air and similar neutral
More informationSpare Parts List IPC EAGLE. Ref: MSUT00648. Model: 464 115V GR/VE
Spare Parts List IPC EAGLE Ref: MSUT00648 Model: 464 115V GR/VE Table: CRANKCASE Progressive Number: 1 0001 LAFN01223 PIN ROTAZIONE MANIGLIONE 2,00 -- 0002 MPVR00914 HOOK MARGHERITA 2,00 -- 0003 MPVR00915
More informationPinza pneumatica per materozze, angolare non autocentrante a due griffe serie PB. 2-jaw non-selfcentering angular pneumatic sprue gripper series PB
PB Pinza pneumatica per materozze, angolare non autocentrante a due griffe serie PB 2-jaw non-selfcentering angular pneumatic sprue gripper series PB (*) (*) (*) Il sensore SS3N203-G è incluso The sensor
More informationCDX. EBARA PUMPS EUROPE S.p.A. CENTRIFUGAL PUMPS. Page - CONTENTS 100
CONTENTS Page - CONTENTS 100 - SPECIFICATIONS 200 SELECTION CHARTS 201 PERFORMANCE CHART 70 202 PERFORMANCE CHART 90 203 PERFORMANCE CHART 120 204 PERFORMANCE CHART 200 205 - CONSTRUCTIONS 300 SECTIONAL
More informationPallet Jack. OWNER S MANUAL Model MH1230. Important Safety Instructions Assembly Instructions Parts and Hardware Identification
OWNER S MANUAL Model MH1230 Important Safety Instructions Assembly Instructions Parts and Hardware Identification Pallet Jack CAUTION: Read, understand and follow ALL instructions before using this product
More informationMobile Hydraulic Pumps T6*M. Denison Vane Technology, fixed displacement
Mobile Hydraulic Pumps T6*M Denison Vane Technology, fixed displacement Contents GENERAL Series T6 Mobile, Denison Vane Pumps Features...3 Instructions...3 Minimum & maximum speeds...4 Pressure ratings...4
More informationAxial Piston Fixed Displacement Motor A2FM
Electric Drives and Controls Hydraulics Linear Motion and ssembly Technologies Pneumatics Service xial Piston Fixed Displacement Motor 2FM RE 91 001/07.05 1/36 Replaces: 11.04 Technical data sheet Series
More informationDISTRIBUTORI ROTANTI ELETTRICI E ELETTRO-IDRAULICI ELECTRO-HYDRAULIC ROTARY COUPLING
t HYDRAULIC COMPONENTS HYDROSTATIC TRANSMISSIONS GEARBOXES - ACCESSORIES HT / A / 50 / 006 / IE DISTRIBUTORI ROTANTI ELETTRICI E ELETTRO-IDRAULICI ELECTRO-HYDRAULIC ROTARY COUPLING INDICE - INDEX DISTRIBUTORI
More informationSelf-aligning ball bearings
Self-aligning ball bearings Designs... 470 Basic design... 470 Sealed bearings... 470 Bearings with an extended inner ring... 472 Bearings on sleeves... 473 Self-aligning ball bearing kits... 474 Appropriate
More informationFILTRI 20x20 PER VINO, LIQUORI, BIRRA A STRATI FILTRANTI FILTERS 20x20 FOR WINE, LIQUEURS, BEER WITH FILTRATION STRATES
FILTRI 20x20 FILTERS 20x20 FOR WINE, LIQUEURS, BEER WITH FILTRATION STRATES FZ8R FZ14R FZ8R INOX FZ14R INOX 1210 FZ 8 VERNICIATO, CON POMPA TIPO R 197,00 FILTER FZ 8 PAINTED VERSION, WITH PUMP TYPE R 1211
More informationInternal gear pump PGF Series 2X and 3X
Internal gear pump GF eries 2X and 3X RE 23 Edition: 4.24 Replaces: 5.2 Fixed displacement Frame sizes, 2 and 3 izes.7 to 4 Maximum pressure 25 bar Displacement.7 to 4 cm 3 H758 Features ow operating noise
More informationTm Racing Spa Via Fano 6 61122 Pesaro ITALY. Phone: +39 0721 25.113 Fax +39 0721 40.18.08 (Amministrazione) Fax +39 0721 40.66.44 (Magazzino Ricambi)
N.B. I Ricambi non contrassegnati con la scritta 144cc sono uguali al 125cc EV Parts not marked with 144cc written are the same of the 125cc EV Tm Racing Spa Via Fano 6 61122 Pesaro ITALY Phone: +39 0721
More informationAssisted lift operated 2/2-way solenoid valves Type EV250B
MAKING MODERN LIVING POSSIBLE Data sheet Assisted lift operated 2/2-way solenoid valves Type EV250B EV250B with assisted lift can operate from zero and up to 10 bar differential pressure. This 2/2-way
More informationV1.0 27/03/2015. Versione: (Version) Ultimo Aggiornamento: (Last Update) Tm Racing Spa Via Fano 6 61122 Pesaro ITALY
Versione: (Version) V1.0 Ultimo Aggiornamento: (Last Update) 27/03/2015 Tm Racing Spa Via Fano 6 61122 Pesaro ITALY Phone: +39 0721 25.113 Fax +39 0721 40.18.08 (Amministrazione) Fax +39 0721 40.66.44
More informationSINGLE LINE CRENTRALIZED LUBRICATION SYSTEM
SINGLE LINE CRENTRALIZED LUBRICATION SYSTEM Volumetric SYSTEM 1 Ph +39 0331 601697 Fax +39 0331 365149 - www.ilclube.com - info@ilclube.it VOLUMETRIC SYSTEM INDEX INTRODUCTION 4-5 MANUAL PUMPS PRD-13 6-7
More informationRPE3-04. Functional Description HA 4014 10/2010. Directional Control Valves Solenoid Operated. Replaces HA 4014 12/2007
Directional Control Valves Solenoid Operated RPE3-04 Size D 04 (02) 320 bar (4600 PSI) 30 L/min(8.0 GPM) HA 4014 10/2010 Replaces HA 4014 12/2007 4/3-, 4/2- way directional control valves with solenoid
More information49/M/18. Tm Racing Spa Via Fano 6 61100 Pesaro ITALY
49/M/18 Tm Racing Spa Via Fano 6 61100 Pesaro ITALY Versione 1.1 Ultimo aggiornamento (Last Update): 4 dicembre 2009 Stampato il: (Printed) 4 dicembre 2009 Phone: +39 0721 25.113 Fax +39 0721 40.18.08
More informationSERIES FRI. Maximum working pressure 20 bar F l o w r a t e t o 1 2 0 0 l / m i n. s. p. a
New Headquarters : MP FILTRI S.p.. Italy Via 1 Maggio, n. Pessano con ornago (Milano) Italy Tel. +9./97.1 Fax +9./9741497-974188 email: sales@mpfiltri.com http://www.mpfiltri.com GRT RITIN MP FILTRI U.K.
More informationIndice (Index) Cilindro MX-END (Cylinder Mx-End) Frizione (Clutch) Basamento Motore (Crankcase) Cambio Cross/Enduro (Gear box)
Indice (Index) Tm Racing Spa Via Fano 6 61100 Pesaro ITALY Phone: +39 0721 25.113 Fax +39 0721 40.18.08 (Amministrazione) Fax +39 0721 40.66.44 (Magazzino Ricambi) Home Page: http://www.tmracing.it E-mail:
More informationG-C600 AR403-GS20 Part nr. K002501
Spare Parts Catalogue Manuale Pezzi di Ricambio G-C600 AR40-GS20 Part nr. K002501 K002501 TAV. 1-14 G-C600-AR40-GS20 G-C600-AR40-GS20 G-C600-AR40-GS20 Date JUN-14 1 2 REF. PART NR. Q.TY Description ENG
More information45 URAI DSL 816-741-0282. Roots. Quick Specs. Also Available in: Part Number T30353020
45 URAI DSL Part Number T30353020 Detachable steel mounting feet Rigid one piece cast iron casing Connections in standard pipe sizes Straight, precision machined two lobe impellers Splash oil lubricated
More information