General Catalog. Europa Development. Company Member CIR S.r.l

Transcription

1 General Catalog Europa Development Company Member CIR S.r.l Head Office Italy Regional Head Office Sicily Scala Greca nº371/b Siracusa Italy Tel : Fax: info@cireuropa.com Romania s Branch 5 Alba Iulia Square 1 st scale bl. I4 3 Sector Bucharest Romania Tel./Fax info@cireuropa.com rev.01

2 Catalog Europa Development Environment Division 0

3 Environment Divisione Ambiente Division A0.00 ENVIRONMENT DIVISION A1.00 Environmental Studies A1.01 VAS Strategic Environmental Assessment of Plans PP.AA. Evaluation of environmental effects caused by plans and programs of public authorities. A1.02 VIA Environmental impact assessment for new works and infrastructure Environmental and socioeconomic impact studies for new business activities are subject to Environmental Impact Assessment, including plants producing energy from renewable sources. A1.03 Due diligence and Compliance audit Verification of compliance with environmental legislation by industry, even in case of acquisitions or preacquisizioni estate. The test is aimed to assess the costs of investments necessary to achieve regulatory compliance. A1.04 Studies of acoustic zoning for public bodies Subdivision of land in communal areas acoustically homogeneous in terms of their functional destination and the actual noise levels, monitored by acoustic detection campaigns. A1.05 Projects of territorial riqualification Analysis of the municipal and / or provincial and identifying critical areas in terms of their functional integration within the urban fabric and report (ad es.abandoned industrial areas and marginal areas). Redevelopment projects of critical areas to recover from the environmental point of view and collective fruition. A1.06 Design of urban natural parks Design, improvement and enhancement of urban natural parks, understood as more or less vast areas not far from the town in which, often for the presence of rivers or streams, there are still elements of naturalness. A1.07 Report on the state of environment and development assistance process Agenda 21L Studies on the state of the environment at local, municipal or supra, relate to various areas (surface water and groundwater, air quality, waste management, land use, etc...) in order to analyze the global state of the environment and identify future strategies.assistance in the process of developing a Local Agenda 21. A1.08 Implementation Rules of the Municipal Waste Management and Waste separation Preparation of Municipal Waste Management Regulations and Separate collection includes checkup on the previous management of the problem refusal, both administrative and operational study of remedial measures aimed at quality and quantity of waste produced(optimizing and streamlining costs and energy). A1. 09 Consultancy for research and development The advice includes the technical and organizational support for the design and / or construction of research and development in the field environment.servicing is carried out in collaboration with research institutions and specialists,through:a proposal for research and innovative design ideas, research studies,feasibility studies,project preparation,technical and economic analysis, identification and use of financing instruments facilitated identifying and selecting research partners and industrial project management. 3

4 Environment Divisione Ambiente Division A2.00 Remediation of contaminated sites A2.01 Characterization of potentially contaminated sites Preparation of plans for the characterization of potentially contaminated sites and enforcement of environmental investigation activities of soil and subsoil. Managing relationships with public authorities for the purpose of submission / approval / implementation of plans. A2.02 Reclamation of polluted sites Design and assistance in the implementation of remediation activities for sites contaminated by the selection of Best Available Technology (BAT) at affordable cost for the return of decontaminated sites to urban uses are allowed. A3.00 Environment Management Systems A3.01 Consulting for implementation and / or Maintenance Management System Environment Customer care organization to implement and / or maintenance of an Environmental Management System complies with UNI EN ISO 14001:2004 and / or EMAS regulation, including any necessary assistance during the certification process and/or registration. a. The Check-up of the organization The evaluation of the management resources of the organization to understand whether the same is addressed on the requirements of the standard reference. The assessor carries out a review and collected the data and information relating to security management, prepares a report which highlighted the strengths and weaknesses of the organization, indicating the need to implement the system and/or corrective action to achieve compliance with the requirements of the rules and/or the attainment of specific objectives of the organization.(gap analysis).the check-up also aims to evaluate the performance of the management system environment, in order to identify corrective actions and/or improvement calibrated on specific needs and organizational objectives (Action Plan), with relative cost-benefit analysis. It also provides guidelines for the implementation of an SG according to the reference and assistance in the identification and use of financing instruments facilitated. b. Initial Environmental Analysis Preparation of the document initial environmental site characterization and environmental significance. c. System Designing System design through preparation of the system architecture, the flow charts of the main processes, the organizational functional map of the processes and documentation. The assistance includes support for integration of the system with various functions and other management systems of the organization. d. Implementation and / or maintenance of the system Support for the implementation of the system and / or improvement interventions through establishing and / or review of documentation (manual, procedures, instructions, forms, reference documents), validated by simulation implementation in real use cases. e. Audit Performing audits on compliance of the system requirements imposed by the reference standard. (also includes the assessment of legislative compliance) and / or objectives set by the organization. This activity allows on one hand, to ensure the proper implementation of the management system, allowing the customer to management of the organization make any necessary adjustments and / or 4

5 Environment Divisione Ambiente Division additions and the other to form also, in practical terms, insiders' s company responsible for the performance of internal audits, through assistance during the execution audit. The assistance includes the preparation of the audit report and the planning of follow-up, with the identification of corrective actions and / or improvement to be undertaken (Action plan). Auditors are appointed and qualified experts, with reference to the business sector organization. f. Assistance during process certification / registration Assistance in managing relationships with the certification body. Guiding the organization's staff during the audit by the institution assistance during the verification activities and follow-up preparations. Assistance for preparing the environmental statement in the case of EMAS registration. A3.02 Delegating the role of the Head of Environment Management System Official delegation of the tasks in the role of the Head of Environment Management System and to be performed with competence and qualifications of who is appointed in relation to the business sector of the organization. A3.03 Assistance in carrying of Lgs.D. 334/99 Comprehensive advice and assistance continues for the implementations of the Legislative Decree n. 334, 17 August 1999 implementing Directive 96/82/EC on the control of the hazards of fire hazards involving dangerous substances. A3.04 Assistance to developing of the Agenda 21L process Assistance to governments in the process of developing a Local Agenda 21. A3.05 Environmental communication Organization of conferences and seminars on environmental issues and energy.drafting of environmental reports and publications related to environmental issues and sustainable development. Support in environmental communications company. A4.00 Technical and administrative assistance A4.01 IEA(AIA) Integrated Environmental Authorization Assistance in preparing the documentation for the licensing procedure of the rite of plant and works under the IPPC regulations. A4.02 IPPC Assistance for adaptation to the provisions under IPPC. A4.03 The Waste Management Advice for the management of special waste,hazardous and non-hazardous and support optimization of disposal and recovery of the same(classification of waste, Keeping records, unique model of environmental complaints.-mud). a. Administrative management of waste for production companies Classification of waste,keeping records,unique model of environmental complaints - MUD. b. Strategic management of waste for production companies Management consulting in situ of special waste, hazardous and non-hazardous, and support in optimizing the disposal and recovery. Support for the selection and supplier management. 5

6 Environment Divisione Ambiente Division c. Support in the preparation of practices are allowed managers to transport/disposal/ recovery Assistance in preparing applications for authorization for new waste management activities and relations with public administrations. A4.04 Consultancy of the noise poullution Verifying compliance with the absolute levels of acoustic zone set on a national or local authorities with the Zoning noise, by integrating sonometers individuazioned and the possible causes and sources of noise disturbance. A4.05 Consultancy, sampling and analysis of air emissions Are carried out sampling and analysis on emissions into the atmosphere of the company authorized under the terms and the frequencies set out in the authorization. A4.06 Environmental controls on water quality Help with chemical and biological sampling and analysis of all types of water, both as regards the discharge of the same supply and monitoring of compliance with the relevant standards. A4.07 Preparation of studies and monitoring on air quality Monitoring of air quality, inventory of significant measures, study of remedial measures aimed at quality and quantity of air emissions and drafting materials. A4.08 Consultancy for design and construction of facilities and civil engineering works and environmental Consultancy for the design and construction of facilities and civil engineering works and the environment as such. treatment plants,plants for waste water treatment,waste management facilities,etc. a. Preliminary examination and feasibility studies Technical visit,feasibility studies with verification of compatibility with the existing planning instruments. b. Technical,economic anc financial proposal It analyzes data derived from the survey,conducted pre-dimensioning of books/equipment, technical and economic analysis.support for the identification and use of financing instruments facilitated. c. Assistance in the management of relations with the entities Assistance for the acquisition of necessary authorizations from the local communities. d. Executive Project Transcriptions instrumental characteristics. Project development executive plants/works e. Assistance for the implementation Support for selecting and managing suppliers of installation services and construction of facilities, including the supply of technological components and execution of civil works.technical management jobs, including incoming materials.booking and control advanced works. f. Testing and issuing certificates Technical assistance for testing the installations/the works 6

7 Environment Divisione Ambiente Division A4.09 Consultancy for design and construction of building projects for environmental sustainability Consultancy for the design and construction of building projects carried out in accordance with the parameters of environmental sustainability and design methodologies for green architecture. a. Preliminary examination and feasibility studies Technical visit. Feasibility studies, with verification constraints absence urban planning. b. Environmental audit and diagnosis Environmental analysis of buildings. Locating the leeway of the parameters of environmental sustainability. c. Identifying improvement actions Project development guidelines of interventions to be implemented. Development of possible building interventions to increase environmental sustainability. d. The Technical,Economical and Financial Proposal It analyzes data derived from the visit, check functional requirements with the objectives of environmental sustainability and presented the best technical and economic proposal that fits the needs of the customer. Support for the identification and use of financing instruments facilitated. e. Executive Project Transcriptions instrumental characteristics. Project Development Executive works and installations, with use of materials and construction techniques of architecture and functional objectives of the increased environmental sustainability of the building envelope/covering. Implementation of innovative projects of apartment buildings zero emission of CO2. f. Assistance for the implementation Support for selecting and managing suppliers of installation services and construction works and installations, including procurement of materials. Technical management jobs, including incoming materials. Accounting and control work progress. g. Testing and issuing certificates Technical assistance for the testing of works and installations. Support for the issuance of certificates. A4.10 Transcriptions instrumental characteristics Transcriptions of portions of land surveying equipment and facilities for projects of environmental interventions of various kinds. a. Topographic surveys using electronic total station Surveying land: measurements were carried out for relief today. Es.rilievo of quarries and landfills, landslide areas, and monitoring., Surveying of buildings: measurement of existing structures, internally and externally, for subsequent trials of a new design or renovation. Topographic Surveying; addressing issues of type register, such as pilings, adjustments of boundaries, riconfinazioni, estimates, evaluations, assessments of land values. 7

8 Environment Divisione Ambiente Division b. Topographic surveys with terrestrial laser scanning Surveys with terrestrial laser scanning with mathematical modeling of surfaces found, removal of sections and profiles, calculation of areas and volumes. Ex relief and monitoring of quarries and landfills, relief of rock walls and unstable areas, relief of complex systems and modeling of piping and equipment installed., A4.11 Services of engineering for the recovery and valorization of the real estate patrimony Services of engineering for the recovery and the valorization of the real estate (manufactured and lands) destined to participations in environmental field: estimative analyzes, changes of use destination, certification of feasibility,participations to the reorganization of the civil and the industrial construction/building patrimony, A4.12 Planning and realization of Territorial Informative Systems (GIS) Design and development of Territorial Informative Systems, GIS-based software applications in environments both commercial and opensource,personalized for the representation and management of information in the environmental field,supporting the planning and the management of interventions by the bodies in charge,... Es. applications: mapping and monitoring water and sanitation for the management of integrated water services;mapping and monitoring pollution, quarries, landfills, protected area, ; analysis and mapping natural hazards and man-made (seismic risk, hydrogeological, from forest fires, transport of hazardous substances to industrial accident, ). A5.00 Information and training A5.01 Information and training Design and conduct of operations information and training in the environmental field, even customized for organizations, basic and specialized, including teaching activities, tutoring and preparation of supporting materials. a. Implementation of SGA Planning and carrying out interventions aimed at informing and training staff implementing the Environmental Management System, with reference to ISO 14001:2004 and the EMAS regulation,geared to the specific needs and functions and powers concerned, including: Periodic reporting to all staff Training for Responsabiles SGA Training for the Persons in charge for Environmental Management Auditor Training of SGA. b. Environmental education Designing and conducting environmental education programs concerning topics such as water cycle and waste separation. c. Personalized Programs Designing and conducting customized training interventions and information on targets and specific topics. 8

9 Catalog Europa Development Energy Division 9

10 Energy Division E0.00 ENERGY DIVISION E1.00 Renewables and energy saving E1.01 Consultancy for design and construction of renewable energy installations Consultancy for design and construction of plants which produce energy from renewable sources (solar, photovoltaic, thermodynamics, wind, hydropower, geothermal, biomass, ). Preliminary examination and feasibility studies Technical inspection and verification in situ in order estimating the possible effective installation. Feasibility studies, with verification absence planning restrictions and buildings. a. Technical,Economic and Financial Proposal. It analyzes data derived from the technical visit, check the energy needs and presented the best technical and economic proposal that fits the needs of the customer. Support for the identification and use of financing instruments facilitated. b. Preliminary project Development of the project prior to making any necessary connection request to the distribution network. c. Assistance in the management of relations with the Entities Assistance for the acquisition of necessary permits, planning and building, by the local authorities. Assistance to the preparation of necessary documentation such as, for example. to connect to the distribution network and for admission to the incentive rates. c. The Executive Project Transcriptions instrumental characteristics. The Executive Development Project of the plant,including any civil works. d. Assistance for the implementation Support for selecting and managing suppliers of installation services and construction of the plant, including the supply of technological components and the enforcement of any civil works. Technical management jobs, including incoming materials. Accounting and control work progress. e. Testing and issuing certificates Technical assistance for the installation and testing works. Support for the issuance of certificates: testing; DM n.37/08 Declaration of Conformity (New L.46/90), certificate of compliance with DK5940 ( ); verification certificates. E1.02 Consultancy for design and implementation of measures for energy saving in buildings Consultancy for the design and implementation of measures for energy efficiency of existing buildings and new construction. a. Preliminary examination and feasibility studies Technical visit,feasibility studies,with verification absence planning restrictions and buiding. 10

11 Energy Division b. Audit and energy diagnosis Analysis of needs and consumption of buildings. Identification of waste, inefficiencies and misuse of energy. c. Energy Classification/Rating Energy certification of buildings and their ranking. d. Identifying improvement actions Project development guidelines of interventions to be implemented. Development of possible interventions and stand on energy retrofit existing buildings. e. Energy Saving Energy saving ed energy management.optimization of the operating cost of facilities, re-discussion of energy contracts with distributors and increasing energy efficiency by identifying solutions for system-building plant. f. Technical,economic and financial proposal. It analyzes data derived from the visit, check functional requirements for energy-saving targets and presented the best technical and economic proposal that fits the needs of the customer. Assistance for the identification and use of financing instruments facilitated (ESCO, local authorities,...). g. Executive Project Transcriptions instrumental characteristics. Project Executive Development works and installations,using materials and construction techniques necessary for the energy certification and serving the goals of saving energy. Implementation of innovative projects of apartment buildings with zero emission of CO2. h. Assistance for the implementation Support for selecting and managing suppliers of installation services and construction works and installations, including procurement of materials. Technical management jobs, including incoming materials. Accounting and control work progress. i. Testing and issuing certificates Technical assistance for the testing of works and installations. Assistance for the issuance of certificates. E1.03 Consultancy for research and development The consultancy includes the technical and organizational support for the design and / or construction of research and development in the energy sector. Servicing/Assistance is carried out in collaboration with research institutions and specialists, through: a proposal for research and innovative design ideas, research studies,feasibility studies,project preparation, technical and economic analysis, identification and use of financing instruments facilitated identifying and selecting research partners and industrial project management. E2.00 Technical Assistance E2.01 Instrumental Transcriptions characteristics Transcriptions of portions of land surveying equipment and structures for the design of energy interventions of various kinds. 11

12 Energy Division a. Topographic surveys using electronic total station Surveying land: measurements were carried out for relief today. Surveying of buildings: measurement of existing structures, internally and externally, for subsequent trials of a new design or renovation. Topographic Surveying; addressing issues of type register, such as pilings, adjustments of boundaries,reconfined, estimates, evaluations, assessments of land values. b. Topographic surveys with terrestrial laser scanning Surveys with terrestrial laser scanning with mathematical modeling of surfaces found, removal of sections and profiles, calculation of areas and volumes. Eg relief of complex systems and modeling of piping and equipment installed. E2.02 Design and implementation of Geographic Information Systems (GIS) Design and development of Geographic Information Systems, GIS-based software applications in both commercial and open source environments, customized for the representation and management of information in the energy field to support the planning and management of interventions by the Entities. Eg. applications: identification and mapping of sites rated to accommodate production facilities from renewable sources. E2.03 Engineering services for the recovery and enhancement of real estate Engineering services for the renovation and development of real estate assets (buildings and land) for interventions in the field of energy: analytical estimation, changes in land uses,certification of practicability, restructuring actions and civil and industrial building stock, E3.00 Information and training E3.01 Information and training Design and conduct of operations information and training on energy supply, including customized for organizations, basic and specialized, including teaching activities, tutoring and preparation of supporting materials. a. Education on energy saving Designing and conducting education programs on the rational use of energy and energy efficiency. b. Personalized programs Designing and conducting customized training interventions and information on targets and subjects. 12

13 Catalog Europa Development Quality Division 13

14 Quality Division Q0.00 QUALITY DIVISION Q1.00 Quality Management Systems Q1.01 Development and Implementation of Quality Management System Care organization in the development and implementation of a Quality Management System, according to UNI EN ISO 9001:2000 and the new 2008 edition, including any necessary assistance during certification process. a. The Organization Check-up(Gap analysis) Appraisal of the managerial order of the organization in order to comprise if the same one is addressed on requirement of the reference norm. The assessor carries out a review and collected the data and information relating to security management, prepares a report which highlighted the strengths and weaknesses of the organization, indicating the need to implement the system and / or corrective action to achieve compliance with the requirements of the rules and / or the attainment of specific objectives of the organization(gap analysis). The check-up also aims to assess the performance of the quality management system (through the use of the guidelines ISO 9004:2000), to identify corrective actions and / or improvement calibrated on specific needs and goals of the organization(action plan), with its costbenefit analysis. It also provides guidelines for the implementation of an SG according to the reference and assistance in the identification and use of financing instruments facilitated. b. System Design System design through preparation of the system architecture, the flow charts of the main processes, the organizational functional map of the processes and documentation. The assistance includes support for integration of the system with various functions and other management systems of the organization. c. System Implementation Support for the implementation of the system by preparing the necessary documentation (manual, procedures, instructions, forms, reference documents), validated by simulation implementation in real use cases. d. Audit Performing first-party audits (organization) and second party (supplier), the system complies with the requirements imposed by the standard of reference (which also includes a verification that the legislature) and / or objectives set by the organization. This activity allows on one hand, to ensure the proper implementation of the management system, allowing the customer to management of the organization make any necessary adjustments and / or additions and the other to form also, in practical terms, insiders' s company responsible for the performance of internal audits, through assistance during the execution audit. The assistance includes the preparation of the audit report and the planning of follow-up, with the identification of corrective actions and / or improvement to be undertaken (Action plan). Appointed auditors are experienced and qualified in accordance with the UNI EN ISO 9011:2003, with reference to the field of business organization. e. Assistance during certification process Assistance in managing relationships with the certification body. 14

15 Quality Division Guiding the organization's staff during the audit by the institution assistance during the verification activities and follow-up preparations. Q1.02 Delegating the role of Head of Quality Management System Official delegation of the tasks in the role of Head of Quality Management System and to be performed with competence and qualifications of who is appointed in relation to the business sector of the Organization. Q1.03 Consultancy for research and development Technical and organizational support for the design and / or construction of projects of research and development in quality.servicing/assistance is carried out in collaboration with research institutions and specialists, through: a proposal for research and innovative design ideas, research studies, feasibility studies,project preparation, technical and economic analysis, identification and use of financing instruments facilitated identifying and selecting research partners and industrial project management. Q2.00 Information and training Q2.01 Information and training Design and conduct of operations information and training in quality, even customized for organizations, basic and specialized, including teaching activities, tutoring and preparation of supporting materials. a. Implementation SGQ Planning and carrying out interventions aimed at informing and training staff implementing the Quality Management System (with reference to ISO 9001:2000 and the new edition 2008),calibrated to the specific needs and functions and powers concerned, including: Periodic reporting to all staff Training for Managers of the Quality Management System Training for responsibles for the Quality Management Training for Quality Management System Auditor b. Training on total quality Designing and conducting training programs for the implementation of the principles of total quality management systems. c. Personalized Programs Designing and conducting customized training interventions and information on targets and subjects. 15

16 Catalog Europa Development Labour Security-Safety Division 16

17 Labour Safety - Security Division S0.00 LABOUR SECURITY- SAFETY DIVISION S1.00 Occupational labour safety-security S1.01 Risk assessment and review (art. 29 Lgs.D. 81/08) Assistance to the employer for the risk assessment and regular review of risk assessment document (DVR), together with the appropriate level of prevention and protection. a. Ready scratch or total revision of the DVR b. The Upgrading of the DVR S1.02 Application of the Legislative Decree 81/08 on the risks of quarries Document preparation and review of Health and Safety of the individual quarries. S1.03 Drafting of the emergency plan and assistance for the implementation a.predisposition of the emergency plan required by the D. M. 10/03/98 and advice for the full implementation with training, training of personnel. b. Updating the Emergency Plan S1.04 Delegated the role of RSPP (art. 33 Lgs.D. 81/08) Official delegation of the tasks in the role of Head of the Prevention and Protection under Article. 33 Lgs.D. 81/08 and must be performed with competence and qualifications of the person being appointed, with reference to the business sector ATECO Organization. S1.05 Continuous assistance to the RSPP Consulting closely linked to enable the RSPP to maintain a high level of efficiency and regulatory compliance of its activities. S1.06 Security under the Directive yards (Lgs.D. 81/08) Preparation of the plan charged to the Buyer and assumption of office of Coordinator for the design and execution of work. S1.07 Formalizing procedures "Work Safe" Preparation of safety procedures customized. S1.08 Analysis of VDT workstations equipped Analysis on individual workstations to check VDT lighting and ergonomics. S1.09 Workplaces Verification of compliance of local production (including electrical equipment, pressure etc.), Services and stores to specific rules,and identification of possible corrective coordination with suppliers / installers qualified. S1.10 Work equipment Visual inspection and functional checking of passive and active present in nearly all work equipment, including those marketed under CE, identification of possible remedial measures through prevention and security solutions. S1.11 Advice/Consultancy for research and development 17

18 Labour Safety - Security Division The advice includes the technical and organizational support for the design and / or construction of projects of research and development in security. Servicing/The assistance is carried out in collaboration with research institutions and specialists, through: a proposal for research and innovative design ideas, research studies, feasibility studies,project preparation,technical and economic analysis, identification and use of financing instruments facilitated identifying and selecting research partners and industrial project management. S2.00 Safety Management Systems S2.01 Consulting for implementation and / or maintenance of the System Safety Management The consulting organization is assisting clients to implement and / or maintenance of a Safety Management System in accordance with BS OHSAS 18001:2007 and the Legislative Decree 81/08, including any necessary assistance during certification process. a. Check-up of the organization The management structure assessment of the organization to understand whether the same is addressed on the requirements of the standard of reference. The assessor carries out a review and collected the data and information relating to security management, prepares a report which highlighted the strengths and weaknesses of the organization indicating the need to implement the system and / or corrective action to achieve compliance with the requirements of the rules and / or the attainment of specific objectives of the organization(gap analysis). The check-up also aims to evaluate the performance of the safety management system in order to identify corrective actions and / or improvement calibrated on specific needs and goals of the organization (Action plan),relatively cost-benefit analysis. It also provides guidelines for the implementation of an SG according to the reference and assistance in the identification and use of financing instruments facilitated. b. System Design System design through preparation of the system architecture, the flow charts of the main processes, the organizational functional map of the processes and documentation. The assistance includes support for integration of the system with various functions and other management systems of the organization. c. System implementation Support for the implementation of the system by preparing the necessary documentation (manual, procedures, instructions,forms,reference documents), validated by simulation implementation in real use cases. d. Audit Performing audits on compliance of the system requirements imposed by the standard of reference (which also includes the assessment of legislative compliance)and/or objectives set by the organization.this activity allows on one hand, to ensure the proper implementation of the management system, allowing the customer to management of the organization make any necessary adjustments and / or additions and the other to form also, in practical terms, insiders' s company responsible for the performance of internal audits, through assistance during the execution audit. The assistance includes the preparation of the audit report and the planning of follow-up, with the identification of corrective actions and / or improvement to be undertaken (Action plan). Auditors are appointed and qualified experts, with reference to the business sector organization. e. Assistance during certification process Assistance in managing relationships with the certification body. 18

19 Labour Safety - Security Division Guiding the organization's staff during the audit by the institution assistance during the verification activities and follow-up preparations. S2.02 Delegating the role of Head of Security Management System Official delegation of the tasks in the role of Manager of Safety Management System to be performed with competence and qualifications of who is appointed in relation to the business sector ATECO Organization. S2.03 Profile Test organization's responsibility under Legislative Decree 231/01 Analysis of the business organization under Legislative Decree 231/08 ( "Regulation on the administrative liability of legal persons, companies and association with no legal personality in accordance with Article 11 of Law 29 September 2000 No 300) and assistance in developing an organizational model and a control system suitable to prevent and fight the commission of the crimes referred to in Legislative Decree no. 231/2001.The assistance is structured along the following stages: a. Inventory and map of areas at risk b. Analysis of potential risks (Gap analysis) c. Construction and evaluation of the system of prior control (Action plan) d. Improving the Model of Organization and Management and Control System. S3.00 Technical and administrative assistance S3.01 Evaluation of the Legislative Decree 81/08 on lead and asbestos Inspection findings and subsequent cognitive instrumental to assess exposure to lead and asbestos. S3.02 Chemical risk assessment Inspection findings and subsequent cognitive instrumental to assess exposure to chemical agents, assistance in the identification of remedial measures, advice for the killing of residual risk. S3.03 Lighting Analysis Transcriptions instrumental in evaluating light intensity as a function of different types of work, and identification of possible improvement actions. S3.04 Consultancy regarding the ventilation plants Feasibility studies for ventilation with prior assessment of the impact air pollution. S3.05 Investigations of lifting, towing and pushing of loads (M. M. C.) Risk assessment of manual handling of loads through the application of specific criteria for calculating the synthetic indicator of risk and identification of possible corrective action. S3.06 Verification of the microclimate in the workplace Transcriptions instrumental for the evaluation of temperature and humidity in the workplace, with calculation of indices of welfare and thermal stress and identification of possible improvement actions. S3.07 Evaluation of the Legislative Decree 81/08 on noise exposure Transcriptions sound level meters and noise risk assessment S3.08 Verification of exposure to electric and magnetic fields Transcriptions instrumentals on electromagnetic waves in the field of ELF, VLF, LF, MF, UHF (from 0 Hz to 20 GHz), identification of possible corrective action. 19

20 Labour Safety - Security Division S3.09 Reclamation of noise in the workplace Verification of the reverberation time, sound decay curve, characterization of sources in frequency and intensity for the preparation of studies of targeted remediation identification of corrective actions. S4.00 Information and training S4.01 Information and training Design and conduct of operations information and training in safety, including customized for organizations, basic and specialized, including teaching activities, tutoring and preparation of supporting materials. a. Prevention and Protection Service Information and training for employees to Prevention and Protection (SPP), including: 1. Periodic workers notification 2. Head Course for Prevention and Protection (RSPP, art. 32 Lgs.D. 81/08) 3. Course Responsible for Workers' Safety (RLS, art.37 Lgs.D. 81/08) 4. Course on Fire Prevention for Workers with emergency crews (D.M. 10 March 1998) 5. Workers at the first aid course (D.M. 15 July 2003 n 388 and subsequent amendments) 5. Conductors elevators Course for conductors of forklifts (art Lgs.D. 81/08): Theoretical and practical course for drivers of fork lifts. Course for drivers of cranes, cranes, hoists (art Lgs.D. 81/08) Course for drivers of cranes, cranes, hoists. 6. Implementation SGS Design and conduct of interventions aimed at informing and training staff implementing the Safety Management System (with reference to the legislation OHSAS 18001:2007 and/or to the Legislative Decree 231/08), tarati sulle specifiche esigenze e delle funzioni e competenze interessate, tra cui: Periodic reporting to all staff Training for Manager of Safety Management System Training for responsibles for Security Management Training for Safety Management System Auditor. 7. Personalized Programs Designing and conducting customized training interventions and information on targets and subjects. 20

21 Catalog Europa Development Clinical Engineering Division 21

22 Clinical Engineering Division I0.00 CLINICAL ENGINEERING DIVISION I1.00 Clinical Engineering I1.01 Periodic checks of safety Periodic checks of electrical safety of equipment used in medical and clinical engineering to ensure the absolute safety of the patient in surgical and diagnostic evaluations, as well as of medical and paramedical, according to the CEI 62.5 (CEI EN Medical electrical equipment. Part 1: General requirements for safety) of D. L. n. 46, 24/02/97. The checks include the following activities: Visual inspection Data recording tab intervention: Control Number Inventory; Model; Control CE. Data recording check-list: check serial, control signals, power control type; control cable and power plug; control wrapping check the class, type of ownership and class risk control connection type (PC, other equipment); system audit, control certification. Instrumental Examination Using the tool Metron QA-90; Electrode Calibration; Setting QA-90 by type of equipment; Recording of data acquired from visual examination; Connection between QA-90 and the equipment to be examined; Detection time of QA-90 depends on the number of electrodes that the equipment has; Recording of data developed by QA-90; Check labels are applied on equipment. I1.02 Inventory of equipment and computerized management Inventory of electrical equipment and computerized management, including possible provision of software and hardware. Activities include: Data storage equipment Connection of QA-90 with a PC for data transfer to accommodate every single card; System and development of the checklists in electronic form attached sheet 's equipment. Data input software Search inventory number Check if belongs equipment examined Inserting the QA-90 Software Resetting alarm occurs. I1.03 Service overall management of maintenance Services and advice tailored to the individual buyer, according to the quality objectives set to offer a management service overall maintenance of electrical equipment, including services such as: Preventive maintenance Corrective Maintenance Special maintenance Assistance for acceptance testing Functional checks Quality Controls 22

23 Clinical Engineering Division Action on adaptation Management of contracts with third parties Spares Assessment on equipment disposals Advice on purchasing equipment Replacement equipment I1.04 Monitoring anesthetic gases Impartial monitoring can provide important elements of assessment, with possible solutions to the Security Supervisors.Among the significant characteristics of monitoring there is a correlation between quantitative data and events that occurred during the operative session. During monitoring, correlating all the information collected, are found possible because of high pollution and indicates the type of surgery to be performed to restore the conditions for healthy environments. I1.05 Monitoring microclimate Check up controls to have a complete and comprehensive state of the system: Due to the correlation of the measures of (performed with use of anemometer), differential pressure (measuring system with resolution 0.1 Pa), measuring air cleanliness (ISO 14644) and Recovery Time (UNI 12569). CIR is able to identify the possible causes of incorrect operation and to suggest interventions aimed at restoring full efficiency of the facilities. I1.06 Suitability of sterilization and washing systems Performance of Performance Qualification for equipment and process development or improvement, together with the customer, delll'organizzazione Service Sterilization preparation of operating instructions, procedures and user's guide. I1.07 Monitoring Through the implementation of a verification protocol, based on current legislation, CIR provides accurate assessment elements to those responsible for the hospital on the microbial loads present in the compartment air and surfaces. CIR is a healthcare facility for the personalization of profiles measured against specific requirements. Through a highly experienced microbiologists, perform analysis under the "at rest" to assess the quality of air in the room and monitor the effectiveness of protocols for cleaning and analysis under the "operational", the only ones that really allow to evaluate the correct operative behavior of the team. I2.00 Management assistance I2.01 Buying Consultancy CIR seeks partner to help identify the most appropriate solutions to customer needs, even if the plans for renewal and multi DRAFTING OF. I2.02 Process analysis and optimization of workflow Analysis of current processes and implementation of operational improvements that exploit the most of every resource of "Hospitals" (staff, infrastructure, technology). Process re-engineering is the answer to these needs and is also the necessary step to raise significantly the level of security, by virtue of the information acquired during the analysis phase in which they are observed more critical. I2.03 Support for ISO 9001 certification in health facilitie The international standard for quality management systems UNI EN ISO 9001 is an important reference for health care companies because, in addition to international recognition, compliance with ISO facilitates the legislative requirements laid down by national and regional legislation, from DPR 14 January 1997 in terms of licensed and accredited healthcare facility. 23

24 Clinical Engineering Division I2.04 Health approval and accreditation CIR able to lead the customer along the route for accreditation and meet the various needs of adaptation to the health legislation in recent years that has changed the logic of the relationship between health services and providers of health services and focused increasingly on quality of services rendered and benefits paid. I2.05 Risk management Analysis and risk management by automating, testing equipment, the development of adequate organization and management of specific training events. I3.00 Information and training I3.01 Information and training Design and conduct of operations information and training in clinical engineering, also customized to the client, basic and specialized, including teaching activities, tutoring and preparation of supporting materials. I3.02 Training and communication through satellite CIR provides response to this need with HCSAT,a new service for Training and communication at a distance. System HCSAT allows communication between audio and video facilities (health insurance, hospitals,university,etc..) Geographically dispersed in a secure and efficient. This is guaranteed by two-way satellite connectivity. 24

25 Catalog Europa Development Occupational Medicine Division 25

26 Occupational Medicine Division M0.00 OCCUPATIONAL MEDICINE DIVISION M1.00 Health surveillance M1.01 Nomination of the Competent Physician(Art. 33 Lgs.D. 81/08) Formal appointment of the tasks in the role of Doctor jurisdiction under Article. 33 D. Lgs. 81/08 and must be performed with competence and qualifications of who is appointed. The doctor,according to the results of risk assessment,perform the following activities: processing the document for risk assessment; planning of measures for the protection of health and psycho-physical integrity of workers, on the basis of the particular organization of knowledge-or production unit and the special situations of risk and for this purpose involved in the control programming exposure of workers, whose results must be given in a timely manner, including for the purpose of assessments and opinions of competence; provision of first aid service in the company and/or organization; to the training and information to workers, for the part pertaining to; choice of personal protective equipment (DPI); implementation and enhancement of programs of "health promotion", according to the principles of social responsibility. M1.02 Health check The doctor,according to the results of risk assessment, perform the following medical examinations, including through the use of a mobile: establish and maintain, for each worker who undergoes health surveillance under his own responsibility, and a health risk. The aforementioned documents must be stored, with preservation of secrecy, at the employer or, in special cases (eg small businesses) - as delegated by the Employer in writing at the doctor responsible; the care required, and on behalf of the employer, as envisaged by the relevant legislation, records of workers exposed to particular agents and /or other risk factors. transmit to the employer (subject to her claim) the folder to send ISPESL in cases provided by law, or delivered to the employee.for the obligations of sending ISPESL folder you should provide an appropriate procedure for atypical workers. M1.03 Support any subsequent inspections by supervisors Evaluation of prescriptions issued; Development of training and any specific information; Definitions of the adjudications; Sponsorship of meetings with business leaders in any supervisory bodies. M1.04 Medical Specialist Visits Medical specialist visits (Audiometry,Spirometry,Cardiology,Ophthalmology, etc.. M1.05 Instrumental examinations and clinical tests Analysis of clinical and instrumental examinations (chest X-ray, examination vestibular emocrono etc.). 26

27 Catalog Europa Development Environmental Engineering Division 27

28 Environmental Engineering Division M0.00 ENVIRONMENTAL ENGINEERING DIVISION ARCHIMEDES SYSTEM AI 0.00 AI systems and monitoring methods 1.01 IEA SYSTEM and methods of monitoring technology for Earth observation satellite in particular GPS systems, both hardware and system software issues. IA IA 1.02 GPS Applications Onboard unit Salomon units for shipboard management and environmental monitoring Salomon software control and navigation software Gemini Field Unit geodetic survey and landslides GEMINI Software Tracking software and GPS navigation data management Onboard unit GUARD GPS signal quality analysis for aeronautical use Application GUARD Data Management Software fleet of aircraft AEGEE and Hippos GPS satellite and mortgage AI 1.03 geodesic Genesis Unit Genesis master station geodetic network management software NOTOCAM Height and arrangement of PBX and integrated level Unit GRAVITRACK GRA VITRACK Master station IA IA 1.04 DATA ANALYSIS Biological data analysis station biological data analysis software to study water quality Station data analysis Physical Chemistry software for chemical analysis and physical measurements of quality this needle AI MARINE traffic control The ARGOS L module installed for control of ships ARGO S Software processing and visualization software that allows vessels AI 1.06 Environmental Lavoisier static packaging mode fixed environmental monitoring facilities A mobile unit self LAVOISIE version 28