ict contactors EN 61095, IEC 1095

Transcription

1 ict contactors DB99 DB669 DB66 Country approval pictograms EN 695, IEC 95 ict contactors are available in two versions: b Contactors without manually-operated b Contactors with manually-operated. The breadth of the ict contactor range satisfies most application cases. ict contactors can be combined with auxiliary control, protection and indication functions. Contactors PB65-5iCT P PB6- PB6- PB6- PB65-5 manual control ict P Indication iacts b This auxiliary allows indication or control of the "open" or "closed" position of the contactor power contacts Interference filtering iactp b This auxiliary is an interference suppressor which limits overvoltages on the control circuit Dual control iactc b Used to control a contactor in impulse-type mode or to combine latched or impulse-type control orders b ict contactors can be used to remote control applications in alternative networks: v lighting, heating, ventilation, roller blinds, sanitary hot water v mechanical ventilation systems, etc v load-shedding of non-priority circuits PB65- Time delay iatet b This auxiliary is used to time delay for ict and itl. According to cabling, there are 5 possible time delay types: v for itl v for ict Function type A: late closing Delay energizing of contactor Function type B: time delay b Energize the contactor by closing a push button b The time delay starts as soon as the control contacts are closed Function type C: late opening b Energize the contactor by closing a push button b The time delay starts when the control contacts are opened Function type H: fixed time operation b Operate the contactor for a predetermined time from the moment of energizing Contactors Contactors auxiliaries Choice of 5 Hz contactors Contactor Rating A Auxiliaries iacts indication auxiliary iactp protection auxiliary iactc, iatet control auxiliary By yellow clips By yellow clips Yes Yes Yes No No Yes No No Yes version:. CA97E.indd

2 ict contactors (cont.) Yellow clip b A simple clip-on system for flexible auxiliaries combination and improved robustness b For electrical and mechanical connections b Insulated terminals IP PB65-9 b Minimum noise b Large circuit labeling area b Mechanical contact position indicator b Consistent with the entire Acti9 offer and with all types of lighting b Manually-operated contactors have a -position selector switch on their front face: v automatic operating mode v temporary "ON" override v permanent "ON" override: used to lock the contactor in the ON position during installation maintenance v shutdown Choice of 6 Hz contactors Manually-operated contactors Contactor Manually-operated contactors Contactors that can be equipped with auxiliaries Contactors that can be equipped with auxiliaries Yes Yes Yes Yes Yes Yes No Yes No Yes CA97E.indd version:.

3 ict contactors (cont.) Catalogue numbers ict contactors - 5 Hz Width in 9 mm modules DB78- DB75- DB77- DB95 DB7-5 P Rating (In) Control voltage Contact AC7a AC7b (V AC) (5 Hz) A 6 A 6 A NO A9C NO A9C 8 NO A9C NO A9C5 NO A9C7 5 A 8.5 A NO A9C5 NO A9C7 P A R R 6 A 6 A NO A9C NO A9C 8 NO A9C R R NO A9C5... NO A9C7 A R NO+NC A9C5 NO+NC A9C5 NO+NC A9C55 R... NO+NC A9C75 A 6 A... NO A9C7 A 5 A 8.5 A NO A9C 8 NO A9C NO A9C5... NO A9C7 NC A9C56... NC A9C76 A 5 A... NO A9C8 6 A A NO A9C6... NO A9C86 A -... NO A9C88 6 P A 5 6 A 6 A NO A9C8 5 A 8.5 A NO A9C8 A 5 A NO A9C A A NO A9C86 6 DB98 DB8-8 DB97 DB96 P A R R R5 R7 R R R6 R8 A R R R R A A 5 R 6 R 6 A 6 A NO A9C... NO A9C8... NO+NC A9C88 A 6 A... NO A9C8 5 A 8.5 A NO A9C... NO A9C8 NC A9C7... NC A9C87... NO+NC A9C88 A 5 A... NO A9C NC A9C A A NO A9C NO A9C86 6 NC A9C NC A9C NO+NC A9C NO+NC A9C869 6 A -... NO A9C88 version:. CA97E.indd

4 ict contactors (cont.) Catalogue numbers ict manual control contactor 5 Hz Width in 9 mm modules DB67- DB68-7 DB P Rating (In) Control voltage (V AC) (5 Hz) AC7a AC7b I auto O I auto O I auto O P P P A A A R R R R R R Contact 6 A 6 A NO A9C5... NO A9C7 NO+NC A9C55... NO+NC A9C75 5 A 8.5 A NO A9C NC A9C6 NO A9C5... NO A9C7 A 5 A NO A9C... NO A9C8 6 A A NO A9C6... NO A9C86 P DB69-7 I auto O P A A 8.5 A... NO A9C8 A 5 A... NO A9C8 6 P DB6- I auto O P A A 8.5 A NO A9C NC A9C7... NO A9C8 A 5 A NO A9C 6 NC A9C7 6 DB I auto O P A R R R R R5 R6 R7 R8... NO A9C8 6 6 A A NO A9C NO A9C86 6 CA97E.indd version:. 5

5 ict contactors (cont.) Catalogue numbers ict contactors - 6 Hz Width in 9 mm modules DB7-5 P Rating (In) Control voltage Contact AC7a AC7b (V AC) (6 Hz) A 5 A 8.5 A 7 NO A9C... NO A9C6 DB95 DB77- P A R R A R R R R DB75- A 6 A 6 A 7 NO+NC A9C5... NO+NC A9C65 5 A 8.5 A 7 NO A9C... NO A9C6 7 NC A9C6... NC A9C66 A 5 A 7 NO A9C... NO A9C6 P DB78- A A 8.5 A 7 NO A9C... NO A9C6 A 5 A 7 NO A9C 6... NO A9C6 6 6 A A 7 NO A9C NO A9C66 6 ict manual control contactor 6 Hz Width in 9 mm modules DB67- P Rating (In) Control voltage (V AC) (6 Hz) AC7a AC7b I auto O P A Contact A 5 A 7 NO A9C... NO A9C6 6 version:. CA97E.indd

6 ict contactors (cont.) Operation (Manual control contactor) Position: O Position: auto Position: I Position: I + P Connection DB66 Rating Lenght tripping Circuit Tightening torque Copper cables Rigid Flexible or ferrule DB95 DB96 DB67 Automatic return to auto position ict PZ: mm 6 - A 9 mm Control.8 N.m.5 to.5 mm:.5 to.5 mm: x.5 mm x.5 mm iacts, iactp, iactc, iatet 6 and 5 A Power.5 to 6 mm to mm PZ: 6 mm A - 6 A mm.5 N.m 6 to 5 mm 6 to 6 mm A 6 to 5 mm 6 to 5 mm PZ: mm - 9 mm -.8 N.m.5 to.5 mm:.5 to.5 mm: x.5 mm x.5 mm CA97E.indd version:. 7

7 ict contactors (cont.) DB9 DB DB Clip on DIN rail 5 mm. ± vertical. IP IP Technical data Power circuit Voltage rating (Ue) P, P 5 V AC Frequency of load Endurance (O-C) Electrical P, P V AC Maximum number of switching operation a day Additional characteristics Insulation voltage (Ui) Pollution degree Rated impulse withstand voltage (Uimp) 5 Hz or 6 Hz See module CA986, cycles 5 V AC.5 kv ( kv for //8 V AC) Degree of protection Device only IP (IEC 659) Device in modular IP enclosure Operating temperature -5 C to +6 C () Storage temperature Tropicalization (IEC 668-) - C to +7 C ELSV compliance (Extra Low Safety Voltage) for //8 V AC versions Treatment (relative humidity 95 % at 55 C) The product control conforms to the SELV (safety extra low voltage) requirements () In the case of contactor mounting in a enclosure for which the interior temperature is in range between 5 C and 6 C, it is necessary to use a spacer, cat. no. A976, between each contactor DB Spacer cat. no. A976 8 version:. CA97E.indd

8 ict contactors (cont.) Mounting accessories DB68 6 Sealable screw shields for top and bottom P, P 5 A A9A59 P /6 A A9A59 P, P /6 A A9A mm spacer A976 8 Yellow clips A9C55 Auxiliaries Indication iacts NO + NC A9C59 Double control inputs CO NO A9C595 A9C596 iactc V AC A9C88 V AC A9C89 Coil suppression blocs iactp...8 V AC A9C V AC A9C V AC A9C59 Time delay 5 iatet... V AC A9C59 ict < 5 A ict u 5 A CA97E.indd version:. 9

9 ict contactors Electrical auxiliaries for ict Indication Protection Control Auxiliaries iacts iactp iactc Indication Interference filtering Impulse/latched control With Open/Close auxiliary contact protection circuits PB6- PB6- PB6- Function b This auxiliary allows indication of the "open" or "closed" position of the contactor power contacts b This auxiliary is an interference suppressor which limits overvoltages on the control circuit b This auxiliary, combined with contactors, enables them to be controlled by order types: v impulse order for local control (input T) v latched order for centralised control (input X) v the last order received takes priority Wiring diagrams DB7 DB8 DB9 DB6 DB5 T X Mounting Use b Mounted to the right of ict b Mounted to the left of ict by yellow clips () b By wires b The iactp has separate and identical circuits, allowing it to be combined with different one on the ict the other by wires b Mounted to the left of ict by yellow clips () b Mains power outages: v < s: keeps its initial status v u 5 s: reset v put back into operation by manual operation on input X or T. b Catalogue numbers A9C59 A9C595 A9C596 A9C598 A9C599 A9C59 A9C88 A9C89 Minimum impulse duration: 5 ms Technical specifications Control voltage V AC (Ue) V DC Operating frequency Hz 5/6 5/6 5/6 Width in 9 mm modules Auxiliary contact (breaking capacity) b b v v Mininimum: ma at V DC/AC - cos φ = Maximum: 5 A at V AC - cos φ = A at V DC Number of contacts NO + NC CO NO Operating C -5 C to +5 C temperature Storage temperature C - C to +7 C Consumption OFF load: VA Inrush () : VA Holding () :. VA () Electrical and mechanical link. () Maximum consumption of all contactors controlled. version:. CA97E.indd

10 ict contactors Electrical auxiliaries for ict (cont.) Control (cont.) iatet Time delay b This auxiliary is used to time delay for ict and itl. According to cabling, there are 5 possible time delay types: v for itl v for ict. Function type A: late closing b Delay energizing of contactor. Function type B: time delay b Energize the contactor by closing a push button. b The time delay starts as soon as the control contacts are closed. Function type C: late opening b Energize the contactor by closing a push button. b The time delay starts when the control contacts are opened. Function type H: fixed time operation b Operate the contactor for a pre-determined time from the moment of energizing. DB DB DB DB PB65- U U U U A ict T t A ict T t A ict T t A ict T t b Mounted to the left of ict by yellow clips () _ A9C59 5/6 - C to +5 C - C to +8 C Off-load: 5 VA Inrush () : A Holding () :. A CA97E.indd version:.

11 ict contactors Accessories for ict Security Accessories Sealable screw shields Yellow clips Spacer PB85-5 PB86-5 PB87-5 PB6- PB8- Function Use b Designed to cover terminals to avoid contact with device screws. b Allow sealing b For ict: P, P - 5 A b For ict: P - /6 A b For ict: P, P - /6 A b Ensure the mechanical and/or electrical link between contactors and their auxiliaries. b Bag of upstream/ downstream b Bag of b Bag of 5 Catalogue numbers A9A59 A9A59 A9A59 A9C55 A976 Technical specifications Width in 9 mm modules 6 Number of poles P, P P P b Required to reduce temperature rise of modular devices installed side by side. b Recommended to separate electronic devices (thermostat, programmable clock, etc.) from electromechanical devices (relays, contactors). version:. CA97E.indd

12 ict contactors Technical advice for ict Consumption ict contactors - 5 Hz P Rating (In) Control voltage Consumption (V AC) (5 Hz) AC7a AC7b Holding Inrush P P P Max. power 6 A 5 A.8 VA 5 VA. W A9C.8 VA 5 VA. W A9C 8.8 VA 5 VA. W A9C.8 VA 5 VA. W A9C5.7 VA 9. VA. W A9C7 5 A 8.5 A.8 VA 5 VA. W A9C5.7 VA 9. VA. W A9C7 6 A 5 A.8 VA 5 VA. W A9C.8 VA 5 VA. W A9C 8.8 VA 5 VA. W A9C.8 VA 5 VA. W A9C VA 9. VA. W A9C7.8 VA 5 VA. W A9C5.8 VA 5 VA. W A9C5.8 VA 5 VA. W A9C VA 9. VA. W A9C75 A 6. A....7 VA 9. VA. W A9C7 5 A 8.5 A.8 VA 5 VA. W A9C 8.8 VA 5 VA. W A9C.8 VA 5 VA. W A9C VA 9. VA. W A9C7.8 VA 5 VA. W A9C VA 9. VA. W A9C76 A 5 A....6 VA VA.6 W A9C8 6 A A.6 VA VA.6 W A9C VA VA.6 W A9C86 A VA 5 VA. W A9C88 6 A 5 A.6 VA VA.6 W A9C8 5 A 8.5 A.6 VA VA.6 W A9C8 A 5 A 6.5 VA 5 VA. W A9C8 6 A A 6.5 VA 5 VA. W A9C86 6 A 5 A.6 VA VA.6 W A9C....6 VA VA.6 W A9C VA VA.6 W A9C88 A 6. A....6 VA VA.6 W A9C8 5 A 8.5 A.6 VA VA.6 W A9C....6 VA VA.6 W A9C8.6 VA VA.6 W A9C VA VA.6 W A9C VA VA.6 W A9C88 A 5 A VA 5 VA. W A9C VA 5 VA. W A9C87 6 A A 6.5 VA 5 VA. W A9C VA 5 VA. W A9C VA 5 VA. W A9C VA 5 VA. W A9C VA 5 VA. W A9C VA 5 VA. W A9C869 A -... VA 6 VA. W A9C88 CA97E.indd version:.

13 ict contactors Technical advice for ict (cont.) Consumption (cont.) ict manual control contactor 5 Hz P Rating (In) Control voltage Consumption (V AC) (5 Hz) AC7a AC7b Holding Inrush P P Max. power 6 A 5 A.7 VA 9. VA. W A9C VA 9. VA. W A9C7.8 VA 5 VA. W A9C VA 9. VA. W A9C75 5 A 8.5 A.8 VA 5 VA. W A9C.8 VA 5 VA. W A9C6.7 VA 9. VA. W A9C VA 9. VA. W A9C7 A 5 A.6 VA VA.6 W A9C....6 VA VA.6 W A9C8 6 A A.6 VA VA.6 W A9C VA VA.6 W A9C86 5 A 8.5 A....6 VA VA.6 W A9C8 A 5 A VA 5 VA. W A9C8 5 A 8.5 A.6 VA VA.6 W A9C.6 VA VA.6 W A9C VA VA.6 W A9C8 A 5 A 6.5 VA 5 VA. W A9C 6.5 VA 5 VA. W A9C VA 5 VA. W A9C8 6 A A 6.5 VA 5 VA. W A9C VA 5 VA. W A9C86 ict contactors - 6 Hz P Rating (In) Control voltage Consumption (V AC) (6 Hz) AC7a AC7b Holding Inrush P P Max. power 5 A 8.5 A 7.8 VA 5 VA. W A9C....7 VA 9. VA.9 W A9C6 6 A 5 A 7.8 VA 5 VA. W A9C VA 9. VA.9 W A9C65 5 A 8.5 A 7.8 VA 5 VA. W A9C....7 VA 9. VA.9 W A9C6 7.8 VA 5 VA. W A9C VA 9. VA.9 W A9C66 A 5 A 7.6 VA VA.6 W A9C....6 VA VA.6 W A9C6 5 A 8.5 A 7.6 VA VA.6 W A9C....6 VA VA.6 W A9C6 A 5 A VA 5 VA. W A9C VA 5 VA. W A9C6 6 A A VA 5 VA. W A9C VA 5 VA. W A9C66 version:. CA97E.indd

14 ict contactors Dimensions for ict Dimensions (mm) DB DB ict 6/5 A ict /6 A DB ict A DB DB ict manual control contactor 6/5 A ict manual control contactor /6 A.5 DB DB iacts iatet iactp iactc CA97E.indd version:. 5