ÖNORM EN ISO (consolidated version) The European Standard EN ISO 717-2:2006 has the status of an Austrian Standard. Edition:
|
|
- Byron Merritt
- 7 years ago
- Views:
Transcription
1 ÖNORM EN ISO Edition: Standards group B Identical (IDT) with ISO 717-2: A1:2006 Identical (IDT) with EN ISO 717-2: A1:2006 Supersedes Edition: ICS Acoustics Rating of sound insulation in buildings and of building elements Part 2: Impact sound insulation (consolidated version) Akustik Bewertung der Schalldämmung in Gebäuden und von Bauteilen Teil 2: Trittschalldämmung (konsolidierte Fassung) Acoustique Évaluation d isolement acoustique des immeubles et des éléments de construction Partie 2: Protection contre le bruit de choc (version consolidée) The European Standard EN ISO 717-2:2006 has the status of an Austrian Standard. ÖNORM EN ISO consists of this national cover page the official English cover page of EN ISO the official English version of ISO 717-2/A1:2006 and ISO 717-2:1996 Publisher and printing: Österreichisches Normungsinstitut, 1020 Wien Copyright ON All rights reserved; No part of this publication may be reproduced or utilized in any form or by any means electronic, mechanical, photocopying or any other data carriers without prior permission from ON! Sale and distribution of national and foreign standards and technical regulations via Österreichisches Normungsinstitut (ON), Heinestraße 38, 1020 Wien Tel.: (+43 1) , Fax: (+43 1) , sales@on-norm.at, Internet: Continuation ÖNORM EN ISO Page 2 and EN ISO Page 1 and ISO Pages I to III and Pages 1 to 12 and ISO 717-2/A1 Pages I to IV and Pages 1 to 5 ON-Committee 208 Acoustic properties of building products and buildings Price/Category 16
2 Seite 2 ÖNORM EN ISO National Foreword This ÖNORM EN ISO has been published without formal voting procedure. It represents the consolidated national new edition of EN ISO 717-2:1996 including the Amendment EN ISO 717-2:1996/A1:2006 adopted via formal enquiry procedure. The previous European Amendment EN ISO 717-2:1996/A1:2006 has been added to the present ÖNORM EN ISO The following clauses have been amended: Page 1, Scope Page 3, Page 3, Page 5, Clause 6 Page 6, Annex A, A.2.1 Page 7, Annex A, A.2.3 Page 7, Clause B.1 Page 10, Table C.1 Page 11, Table C.2 Page 11, Table C.3 Page 12, Annex D
3 EUROPEAN STANDARD NORME EUROPÉENNE EUROPÄISCHE NORM EN ISO Dezember A1 August 2006 ICS English version Acoustics Rating of sound insulation in buildings and of building elements Part 2: Impact sound insulation Akustik Bewertung der Schalldämmung in Gebäuden und von Bauteilen Teil 2: Trittschalldämmung Acoustique Évaluation d isolement acoustique des immeubles et des éléments de construction Partie 2: Protection contre le bruit de choc This European Standard was approved by CEN on 30. November This amendment A1 modifies the European Standard EN 717-2:1996; it was approved by CEN on 14. August CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the Management Centre or to any CEN member. This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CEN member into its own language and notified to the Management Centre has the same status as the official versions. CEN members are the national standards bodies of Austria, Belgium, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom. EUROPEAN COMMITTEE FOR STANDARDIZATION COMITÉ EUROPÉEN DE NORMALISATION EUROPÄISCHES KOMITEE FÜR NORMUNG Management-Zentrum: rue de Stassart, 36 CEN All rights of exploitation in any form and by any means reserved worldwide for CEN national Members.. B-1050 Brüssel Ref. Nr. EN E
4
5 INTERNATIONAL STANDARD IS Second edition 1996-l 2-15 Acoustics - Rating of sound insulation in buildinas and of buildings elements - u Part 2: Impact sound insu lation Acoustique - 6valuation de / I isolement acoustique des immeubles et des Mments de construction - Parfie 2: Protection contre le bruit de choc Reference number IS : 1996(E)
6 IS0 717=2:1996(E) Foreword IS0 (the International Organization for Standardization) is a worldwide federation of national standards bodies (IS0 member bodies). The work of preparing International Standards is normally carried out through IS0 technical committees. Each member body interested in a subject for which a technical committee has been established has the right to be represented on that committee. International organizations, governmental and nongovernmental, in liaison with ISO, also take part in the work. IS0 collaborates closely with the International Electrotechnical Commission (IEC) on all matters of electrotechnical standardization. Draft International Standards adopted by the technical committees are circulated to the member bodies for voting. Publication as an international Standard requires approval by at least 75 % of the member bodies casting a vote. International Standard IS was prepared by Technical Committee ISOnC 43, Acoustics, Subcommittee SC 2, Building acoustics. This second edition of IS cancels and replaces the first edition (IS :1982), which has been technically revised. IS0 717 consists of the following parts, under the general title: Acoustics - Rating of sound insulation in buildings and of building elements - Part 1: Airborne sound insulation Part 2: Impact sound insulation Annexes A, B, C and D of this part of IS0 717 are for information 0 IS only. All rights reserved. Unless otherwise specified, no part of this publication may be reproduced or utilized in any form or by any means, electronic or mechanical, including photocopying and microfilm, without permission in writing from the publisher. International Organization for Standardization Case Postale 56 l CH-1211 Geneve 20 l Switzerland Printed in Switzerland ii
7 @ IS0 IS : 1996(E) Introduction Methods of measurement of impact sound insulation in buildings and of building elements have been standardized in IS , IS and IS These methods give values for the impact sound insulation which are frequency dependent. The purpose of this part of IS0 717 is to standardize a method whereby the frequency-dependent values of impact sound insulation can be converted into a single number characterizing the acoustical performance. The method has been widely used since However, since there is some evidence that it could be improved, a spectrum adaptation term is added and it is recommended to gather experience with this.... III
EN ISO 14121-1. Safety of machinery Risk assessment. Sicherheit von Maschinen Risikobeurteilung Teil 1: Leitsätze (ISO 14121-1:2007)
ÖNORM EN ISO 14121-1 Edition: 2008-01-01 Safety of machinery Risk assessment Part 1: Principles (ISO 14121-1:2007) Sicherheit von Maschinen Risikobeurteilung Teil 1: Leitsätze (ISO 14121-1:2007) Sécurité
More informationÖNORM EN 1504-8. The European Standard EN 1504-8 has the status of an Austrian Standard. Edition: 2005-02-01. Standards group B
ÖNORM EN 1504-8 Edition: 2005-02-01 Standards group B Identical (IDT) with EN 1504-8:2004 ICS 91.080.40 Products and systems for the protection and repair of concrete structures Definitions, requirements,
More informationEN ISO 10993-1. Biological evaluation of medical devices. Part 1: Evaluation and testing within a risk management process
ÖNORM EN ISO 10993-1 Edition: 2011-03-15 Biological evaluation of medical devices Part 1: Evaluation and testing within a risk management process (consolidated version) Biologische Beurteilung von Medizinprodukten
More informationEN ISO 8253-1. Acoustics Audiometric test methods. Part 1: Pure-tone air and bone conduction audiometry
ÖNORM EN ISO 8253-1 Edition: 2011-04-15 Acoustics Audiometric test methods Part 1: Pure-tone air and bone conduction audiometry (ISO 8253-1:2010) Akustik Audiometrische Prüfverfahren Teil 1: Grundlegende
More informationDRAFT ÖNORM EN ISO 11986
DRAFT ÖNORM EN ISO 11986 Edition: 2009-10-01 Ophthalmic optics Contact lenses and contact lens care products Determination of preservative uptake and release (ISO/DIS 11986:2009) Augenoptik Kontaktlinsen
More informationDRAFT ÖNORM EN 16602-40-12
DRAFT ÖNORM EN 16602-40-12 Edition: 2013-12-15 Space product assurance Fault tree analysis Adoption notice ECSS/IEC 61025 Raumfahrtproduktsicherung Fehlerbaumanalyse Adoption notice ECSS/IEC 61025 Assurance
More informationHYGROTHERMAL PERFORMANCE OF
IRISH STANDARD I.S. EN ISO 15927-5:2005 ICS 07.060 91.120.10 HYGROTHERMAL PERFORMANCE OF BUILDINGS - CALCULATION AND PRESENTATION OF CLIMATIC DATA - PART National Standards Authority of Ireland Glasnevin,
More informationDEUTSCHE NORM June 2003. Plastics Determination of flexural properties (ISO 178 : 2001) English version of DIN EN ISO 178
DEUTSCHE NORM June 2003 Plastics Determination of flexural properties (ISO 178 : 2001) English version of DIN EN ISO 178 { EN ISO 178 ICS 83.080.01 Kunststoffe Bestimmung der Biegeeigenschaften (ISO 178
More informationDEUTSCHE NORM February 2004 DIN EN ISO 18265 {
DEUTSCHE NORM February 2004 DIN EN ISO 18265 { ICS 77.040.10 Supersedes DIN 50150, October 2000 edition. Metallic materials Conversion of hardness values (ISO 18265 : 2003) English version of DIN EN ISO
More informationÖNORM EN 1643. Valve proving systems for automatic shut-off valves for gas burners and gas appliances
ÖNORM EN 1643 Edition: 2001-01-01 Standards groups H and M Identical (IDT) with ICS 23.060.20 Valve proving systems for automatic shut-off valves for gas burners and gas appliances Ventilüberwachungssysteme
More informationMARKING CODES FOR RESISTORS AND CAPACITORS (IEC 60062:2004) IRISH STANDARD I.S. EN 60062:2005. Price Code. Údarás um Chaighdeáin Náisiúnta na héireann
IRISH STANDARD I.S. EN 60062:2005 ICS 31.020 National Standards Authority of Ireland Glasnevin, Dublin 9 Ireland Tel: +353 1 807 3800 Fax: +353 1 807 3838 http://www.nsai.ie MARKING CODES FOR RESISTORS
More informationPart 13: Determination of secant modulus of elasticity in compression
ÖNORM EN 12390-13 Edition: 2013-12-15 Testing hardened concrete Part 13: Determination of secant modulus of elasticity in compression Prüfung von Festbeton Teil 13: Bestimmung des Elastizitätsmoduls unter
More informationInformation supplied by the manufacturer with medical devices
Irish Standard I.S. EN 1041:2008 Information supplied by the manufacturer with medical devices NSAI 2008 No copying without NSAI permission except as permitted by copyright law. I.S. EN 1041:2008 Incorporating
More informationMEASUREMENT OF FLUID FLOW BY MEANS OF PRESSURE DIFFERENTIAL DEVICES INSERTED IN CIRCULAR CROSS-SECTION CONDUITS RUNNING FULL - PART 1:
STANDARD I.S. EN ISO 5167-1:2003 ICS 17.120.10 MEASUREMENT OF FLUID FLOW BY MEANS OF PRESSURE DIFFERENTIAL DEVICES National Standards Authority of Ireland Dublin 9 Ireland Tel: (01) 807 3800 Tel: (01)
More informationAEROSPACE SERIES - QUALIFICATION AND APPROVAL OF PERSONNEL FOR NON-DESTRUCTIVE TESTING IRISH STANDARD I.S. EN 4179:2006.
IRISH STANDARD I.S. EN 4179:2006 ICS 49.020 National Standards Authority of Ireland Glasnevin, Dublin 9 Ireland AEROSPACE SERIES - QUALIFICATION AND APPROVAL OF PERSONNEL FOR Tel: +353 1 807 3800 Fax:
More informationDEUTSCHE NORM September 2003
DEUTSCHE NORM September 2003 Smoke and heat control systems Part 2: Specification for natural smoke and heat exhaust ventilators English version of DIN EN 12101-2 { EN 12101-2 ICS 13.220.99 Rauch- und
More informationGeneral requirements for bodies operating assessment and certificationlregistration of quality systems (ISOIIEC Guide 6ZA996)
Edition: 1998-05-01 ldentical (IDT) with ÖVE EN 4501 2: I998 ISOIIEC 62 Guide: 1996 Supersedes ÖNORM EN 4501 2: 1990-06-08 ÖNORM EN 45012 Bbl 1:1990 08 ICS 03.1 20.20 General requirements for bodies operating
More informationDEUTSCHE NORM August 2001. Steel wire for mechanical springs Part 3: Stainless spring steel wire English version of DIN EN 10270-3
DEUTSCHE NORM August 2001 Steel wire for mechanical springs Part 3: Stainless spring steel wire English version of DIN EN 10270-3 { EN 10270-3 ICS 77.140.25; 77.140.65 Stahldraht für Federn Teil 3: Nicht
More informationMetallic products Types of inspection documents
BRITISH STANDARD BS EN 10204:2004 Metallic products Types of inspection documents The European Standard EN 10204:2004 has the status of a British Standard ICS 01.110; 77.080.01; 77.120.01 BS EN 10204:2004
More informationCOPYRIGHT Danish Standards. NOT FOR COMMERCIAL USE OR REPRODUCTION. DS/EN 1515-1:2000
EUROPEAN STANDARD NORME EUROPÉENNE EUROPÄISCHE NORM EN 1515-1 November 1999 ICS 21.060.10; 21.060.20; 23.040.60 English version Flanges and their joints - Bolting - Part 1: Selection of bolting Brides
More informationCOPYRIGHT Danish Standards. NOT FOR COMMERCIAL USE OR REPRODUCTION
EUROPEAN STANDARD NORME EUROPÉENNE EUROPÄISCHE NORM ICS 91.060.50 English version EN 12045 June 2000 Shutters and blinds power operated - Safety in use - Measurement of the transmitted force Fermetures,
More informationWelding coordination Tasks and responsibilities
BRITISH STANDARD BS EN ISO 14731:2006 Welding coordination Tasks and responsibilities The European Standard EN ISO 14731:2006 has the status of a British Standard ICS 25.160.01 BS EN ISO 14731:2006 National
More informationASSEMBLY TOOLS FOR SCREWS AND NUTS - HAND TORQUE TOOLS - REQUIREMENTS AND TEST METHODS FOR DESIGN CONFORMANCE TESTING, QUALITY CONFORMANCE TESTING AND
IRISH STANDARD I.S. EN ISO 6789:2003 ICS 25.140.30 ASSEMBLY TOOLS FOR SCREWS AND NUTS - HAND TORQUE TOOLS - REQUIREMENTS AND TEST METHODS FOR National Standards Authority of Ireland Dublin 9 Ireland Tel:
More informationONR CEN/TS 16555-5. Innovation management Part 5: Collaboration management (prcen/ts 16555-5:2014) DRAFT ICS 03.100.40; 03.100.50
ICS 03.100.40; 03.100.50 DRAFT ONR CEN/TS 16555-5 Innovation management Part 5: Collaboration management (prcen/ts 16555-5:2014) Innovationsmanagement Teil 5: Partnermanagement (prcen/ts 16555-5:2014)
More informationOutdoor furniture Seating and tables for camping, domestic and contract use
BRITISH STANDARD BS EN 581-1:2006 Outdoor furniture Seating and tables for camping, domestic and contract use Part 1: General safety requirements The European Standard EN 581-1:2006 has the status of a
More informationThis document is a preview generated by EVS
EESTI STANDARD EVS-EN 50363-10-2:2005 Madalpingeliste jõukaablite isoleer-, mantli- ja kattematerjalid. Osa 10-2: Mitmesugused mantlikompaundid. Termoplastiline polüuretaan Insulating, sheathing and covering
More informationSHIPS AND MARINE TECHNOLOGY -
IRISH STANDARD I.S. EN ISO 7547:2005 ICS 47.020.80 47.020.90 SHIPS AND MARINE TECHNOLOGY - AIR-CONDITIONING AND VENTILATIION OF ACCOMMODATION SPACES - DESIGN National Standards Authority of Ireland Glasnevin,
More informationDRAFT ÖNORM EN ISO 22476-9
DRAFT ÖNORM EN ISO 22476-9 Edition: 2009-11-15 Geotechnical investigation and testing Field testing Part 9: Field vane test (ISO/DIS 22476-9:2009) Geotechnische Erkundung und Untersuchung Felduntersuchungen
More informationThis document is a preview generated by EVS
TECHNICAL SPECIFICATION SPÉCIFICATION TECHNIQUE TECHNISCHE SPEZIFIKATION CEN ISO/TS 17573 June 2003 ICS 35.240.60 English version Road Transport and Traffic Telematics Electronic Fee Collection (EFC) System
More informationInstallation and equipment for liquefied natural gas - Design and testing of loadinglunloading arms
Edition: 1997-1 1-01 ldentical (IDT) with EN 1474:1997 Supersedes 1 ICS 75.200 Installation and equipment for liquefied natural gas - Design and testing of loadinglunloading arms Anlagen und Ausrüstung
More informationONR CEN/TS 16555-3. Innovation management Part 3: Innovation thinking (prcen/ts 16555-3:2014) DRAFT ICS 03.100.40; 03.100.50
ICS 03.100.40; 03.100.50 DRAFT ONR CEN/TS 16555-3 Innovation management Part 3: Innovation thinking (prcen/ts 16555-3:2014) Innovationsmanagement Teil 3: Integriertes Design-Management (prcen/ts 16555-3:2014)
More informationFASTENERS - ACCEPTANCE INSPECTION (ISO 3269:2000) IRISH STANDARD I.S. EN ISO 3269:2000. Price Code. Údarás um Chaighdeáin Náisiúnta na héireann
IRISH STANDARD I.S. EN ISO 3269:2000 ICS 21.060.01 National Standards Authority of Ireland Dublin 9 Ireland Tel: (01) 807 3800 Tel: (01) 807 3838 FASTENERS - ACCEPTANCE INSPECTION (ISO 3269:2000) NSAI
More informationThis document is a preview generated by EVS
EESTI STANDARD EVS-EN ISO 140-3:1999 Akustika. Heliisolatsiooni mõõtmine hoonetes ja hooneosadel. Osa 3: Hooneosade õhuheli isolatsiooni laborimõõtmised Acoustics - Measurement of sound insulation in buildings
More informationEnglish Version. Security service providers - Terminology
EUROPEAN STANDARD NORME EUROPÉENNE EUROPÄISCHE NORM EN 15602 January 2008 ICS 01.040.03; 01.040.13; 03.080.20; 13.310 English Version Security service providers - Terminology Prestataires de services de
More informationThis document is a preview generated by EVS
EESTI STANDARD EVS-EN 10226-1:2004 Pipe threads where pressure tight joints are made on the threads - Part 1 : Taper external threads and parallel internal threads - Dimensions, tolerances and designation
More informationWINDOWS AND DOORS - WATERTIGHTNESS - TEST METHOD IRISH STANDARD I.S. EN 1027:2000. Price Code. Údarás um Chaighdeáin Náisiúnta na héireann
IRISH STANDARD I.S. EN 1027:2000 ICS 91.060.50 National Standards Authority of Ireland Dublin 9 Ireland Tel: (01) 807 3800 Tel: (01) 807 3838 WINDOWS AND DOORS - WATERTIGHTNESS - TEST METHOD NSAI 2000
More informationEnglish version. CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the
EUROPEAN STANDARD NORME EUROPÉENNE EUROPÄISCHE NORM EN 4162 2012 ICS: 49.030.20 English version Aerospace series Screws 100 countersunk normal head, offset cruciform recess, coarse tolerance normal shank,
More informationThis document is a preview generated by EVS
CEN WORKSHOP CWA 16926-7 August 2015 AGREEMENT ICS 35.240.40; 35.240.15; 35.200 English version Extensions for Financial Services (XFS) interface specification Release 3.30 - Part 7: Check Reader/Scanner
More informationThis document is a preview generated by EVS
EESTI STANDARD EVS-EN ISO 22005:2008 Traceability in the feed and food chain - General principles and basic requirements for system design and implementation Traceability in the feed and food chain - General
More informationKrav til sikkerhed for sekundære batterier og installationer af batterier Del 2: Stationære batterier
Dansk standard DS/EN 50272-2 1. udgave 2001-08-10 Krav til sikkerhed for sekundære batterier og installationer af batterier Del 2: Stationære batterier Safety requirements for secondary batteries and battery
More informationONR CEN/TS 419241. Security Requirements for Trustworthy Systems Supporting Server Signing (prcen/ts 419241:2013) DRAFT ICS 35.240.
ICS 35.240.99 DRAFT ONR CEN/TS 419241 Security Requirements for Trustworthy Systems Supporting Server Signing (prcen/ts 419241:2013) Sicherheitsanforderungen für Vertrauenswürdige Systeme, die Serversignaturen
More informationHEATING FUELS - FATTY ACID METHYL ESTERS (FAME) - REQUIREMENTS AND TEST METHODS STANDARD I.S. EN 14213:2003. Price Code
STANDARD I.S. EN 14213:2003 ICS 75.160.20 National Standards Authority of Ireland Dublin 9 Ireland HEATING FUELS - FATTY ACID METHYL Tel: (01) 807 3800 Fax: (01) 807 3838 ESTERS (FAME) - REQUIREMENTS AND
More informationDRAFT ÖNORM ISO/IEC 27005
DRAFT ÖNORM ISO/IEC 27005 Edition: 2013-07-01 Information technology Security techniques Information security risk management (ISO/IEC 27005:2011) Informationstechnologie Sicherheitstechnik Informationssicherheits-
More informationPlastics - Verification of pendulum impacttesting machines - Charpy, Izod and tensile
Irish Standard I.S. EN ISO 13802:2015 Plastics - Verification of pendulum impacttesting machines - Charpy, Izod and tensile impact-testing (ISO/FDIS 13802:2015) CEN 2015 No copying without NSAI permission
More informationThis document is a preview generated by EVS
EESTI STANDARD EVS-EN 16601-10-01:2014 Space project management - Part 10-01: Organization and conduct of reviews EESTI STANDARDI EESSÕNA NATIONAL FOREWORD See Eesti standard EVS-EN 16601-10-01:2014 sisaldab
More informationThis document is a preview generated by EVS
EESTI STANDARD EVS-EN 927-6:2006 Paints and varnishes - Coating materials and coating systems for exterior wood - Part 6: Exposure of wood coatings to artificial weathering using fluorescent UV lamps and
More informationConformity assessment Requirements for bodies providing audit and certification of management systems
BRITISH STANDARD Conformity assessment Requirements for bodies providing audit and certification of management systems The European Standard has the status of a British Standard ICS 03.120.20 BS EN ISO/IEC
More informationWood flooring and parquet Characteristics, evaluation of conformity and marking
ÖNORM EN 14342 Edition: 2013-09-15 Wood flooring and parquet Characteristics, evaluation of conformity and marking Holzfußböden und Parkett Eigenschaften, Bewertung der Konformität und Kennzeichnung Planchers
More informationSkovbrugsmaskiner Sikkerhedskrav til og prøvning af motordrevne stangsave til beskæring Del 2: Maskiner med rygbåret energikilde
Dansk standard DS/EN ISO 11680-2 3. udgave 2012-01-18 Skovbrugsmaskiner Sikkerhedskrav til og prøvning af motordrevne stangsave til beskæring Del 2: Maskiner med rygbåret energikilde Machinery for forestry
More informationThis document is a preview generated by EVS
EESTI STANDARD EVS-EN 10263-3:2001 Steel rod, bars and wire for cold heading and cold extrusion - Part 3: Technical delivery conditions for case hardening steels Steel rod, bars and wire for cold heading
More informationEnglish Version. Fire safety storage cabinets - Part 2: Safety cabinets for pressurised gas cylinders
EUROPEAN STANDARD NORME EUROPÉENNE EUROPÄISCHE NORM EN 14470-2 August 2006 ICS 13.220.40; 71.040.10 English Version Fire safety storage cabinets - Part 2: Safety cabinets for pressurised gas cylinders
More informationSpecification and qualification of welding procedures for metallic materials Welding procedure specification
BRITISH STANDARD BS EN ISO 15609-1:2004 Specification and qualification of welding procedures for metallic materials Welding procedure specification Part 1: Arc welding The European Standard EN ISO 15609-1:2004
More informationThe Guardianship Service
The Guardianship Service How can they help you? When you arrive in Belgium Are you under the age of 18 and have you arrived in Belgium without your father or mother? You are searching for support and accommodation
More informationQuality requirements for fusion welding of metallic materials
BRITISH STANDARD BS EN ISO 3834-2:2005 Quality requirements for fusion welding of metallic materials Part 2: Comprehensive quality requirements The European Standard EN ISO 3834-2:2005 has the status of
More informationThis document is a preview generated by EVS
EESTI STANDARD EVS-EN 1047-2:2009+A1:2013 Secure storage units - Classification and methods of test for resistance to fire - Part 2: Data rooms and data container EESTI STANDARDI EESSÕNA NATIONAL FOREWORD
More informationSVENSK STANDARD SS-EN 50271
SVENSK STANDARD SS-EN 50271 Fastställd Utgåva Sida Ingår i Svenska Elektriska Kommissionen, SEK 2002-04-18 1 1 (1+9) SEK Område 31 Copyright SEK. Reproduction in any form without permission is prohibited.
More informationEmployee eligibility to work in the UK
Employee eligibility to work in the UK This document details legal requirements that apply to ALL new members of staff All employers in the UK are legally bound to comply with the Asylum and Immigration
More informationCredit transfer to Customer account with AS "Meridian Trade Bank" EUR, USD free of charge * - 4.1.2. Other countries currency information in the Bank
Pricelist for individuals residents of Latvia SERVICES 4. TRANSFERS In the Bank PRICE LIST IN EUR Using «MultiNet» 4.1. 4.1.1. Credit transfer to Customer account with EUR, USD free of charge * 4.1.2.
More informationCOMMUNICATION FROM THE COMMISSION
EUROPEAN COMMISSION Brussels, 17.9.2014 C(2014) 6767 final COMMUNICATION FROM THE COMMISSION Updating of data used to calculate lump sum and penalty payments to be proposed by the Commission to the Court
More informationEESTI STANDARD EVS-EN ISO 877-3:2011
EESTI STANDARD EVS-EN ISO 877-3:2011 Plastics - Methods of exposure to solar radiation - Part 3: Intensified weathering using concentrated solar radiation (ISO 877-3:2009) EESTI STANDARDI EESSÕNA Käesolev
More informationAmbient air - Standard gravimetric measurement method for the determination of the PM10 or PM2,5 mass concentration of suspended particulate matter
Irish Standard I.S. EN 12341:2014 Ambient air - Standard gravimetric measurement method for the determination of the PM10 or PM2,5 mass concentration of suspended particulate matter CEN 2014 No copying
More informationISO 13845 INTERNATIONAL STANDARD
INTERNATIONAL STANDARD ISO 13845 First edition 2000-04-15 Plastics piping systems Elastomeric-sealing-ring-type socket joints for use with unplasticized poly(vinyl chloride) (PVC-U) pipes Test method for
More informationStructural steel equal and unequal leg angles
BRITISH STANDARD BS EN 10056-2:1993 Specification for Structural steel equal and unequal leg angles Part 2: Tolerances on shape and dimensions The European Standard EN 10056-2:1993 has the status of a
More informationNaturgas Bestemmelse af sammensætning med defineret usikkerhed ved gaskromatografi Del 2: Usikkerhedsberegninger
Dansk standard DS/EN ISO 6974-2 2. udgave 2012-06-20 Naturgas Bestemmelse af sammensætning med defineret usikkerhed ved gaskromatografi Del 2: Usikkerhedsberegninger Natural gas Determination of composition
More informationThis document is a preview generated by EVS
EESTI STANDARD EVS-EN 40-3-3:2013 Lighting columns - Design and verification - Part 3-3: Verification by calculation EESTI STANDARDI EESSÕNA NATIONAL FOREWORD See Eesti standard EVS-EN 40-3-3:2013 sisaldab
More informationNon-destructive testing Ð Ultrasonic examination
BRITISH STANDARD BS EN 583-3 : 1997 The European Standard has the status of a British Standard ICS 19.100 NO COPYING WITHOUT BSI PERMISSION EXCEPT AS PERMITTED BY COPYRIGHT LAW Non-destructive testing
More information1. Perception of the Bancruptcy System... 2. 2. Perception of In-court Reorganisation... 4
Bankruptcy Systems and In-court Reorganisation of Firms, 2010 Content: 1. Perception of the Bancruptcy System... 2 2. Perception of In-court Reorganisation... 4 3. Perception of Creditor Committees, Fast
More informationNEW PASSENGER CAR REGISTRATIONS BY ALTERNATIVE FUEL TYPE IN THE EUROPEAN UNION 1 Quarter 4 2015
NEW PASSENGER CAR REGISTRATIONS BY ALTERNATIVE FUEL TYPE IN THE Quarter 4 2015 Alternative fuel vehicle (AFV) registrations: +20.0% in 2015; +21.1% in Q4 In the fourth quarter of 2015, total alternative
More informationLabour Force Survey 2014 Almost 10 million part-time workers in the EU would have preferred to work more Two-thirds were women
75/2015-27 April 2015 Labour Force Survey 2014 Almost 10 million part-time workers in the EU would have preferred to work more Two-thirds were women Among the 44.1 million persons in the European Union
More informationEESTI STANDARD EVS-EN 13606-4:2007. Health informatics - Electronic health record communication - Part 4: Security
EESTI STANDARD EVS-EN 13606-4:2007 Health informatics - Electronic health record communication - Part 4: Security EESTI STANDARDI EESSÕNA Käesolev Eesti standard EVS-EN 13606-4:2007 sisaldab Euroopa standardi
More informationThis document is a preview generated by EVS
EESTI STANDARD EVS-EN 14348:2005 Keemilised desinfektsioonivahendid ja antiseptikumid. Kvantitatiivne suspensioonikatse meditsiini valdkonnas, meditsiinilised instrumendid kaasa arvatud, kasutatava keemiliste
More informationErgonomi Fysisk miljø Anvendelse af internationale standarder for personer med særlige behov
Dansk standard DS/EN ISO 28803 1. udgave 2012-04-23 Ergonomi Fysisk miljø Anvendelse af internationale standarder for personer med særlige behov Ergonomics of the physical environment Application of international
More informationThis document is a preview generated by EVS
EESTI STANDARD EVS-EN 15603:2008 Energy performance of buildings - Overall energy use and definition of energy ratings Energy performance of buildings - Overall energy use and definition of energy ratings
More informationFEDERATION EUROPEENNE DE LA MANUTENTION Product Group. industrial trucks. A brief guide for identification of noncompliant. - Exhaust Emission -
FEDERATION EUROPEENNE DE LA MANUTENTION Product Group Industrial Trucks FEM A brief guide for identification of noncompliant industrial trucks 11.2010 (E) - Exhaust Emission - I n d e x 1 Introduction...
More informationDansk standard DS/EN 15603. Energy performance of buildings Overall energy use and definition of energy ratings. 1.
Dansk standard DS/EN 15603 1. udgave 2008-02-20 Bygningers energieffektivitet Samlet energiforbrug og definition af energiklasser Energy performance of buildings Overall energy use and definition of energy
More informationERASMUS+ MASTER LOANS
ERASMUS+ MASTER LOANS Erasmus+ Master Loan: opening up access to more affordable lending for cross-border studies The Erasmus+ programme makes it possible for students who want to take a full Masters level
More informationERASMUS+ MASTER LOANS
Ref. Ares(2015)660570-17/02/2015 ERASMUS+ MASTER LOANS Erasmus+ Master Loan: opening up access to more affordable lending for cross-border studies The Erasmus+ programme makes it possible for students
More informationThis document is a preview generated by EVS
EESTI STANDARD EVS-EN 13201-5:2015 Road lighting - Energy performance indicators EVS-EN 13201-5:2015 EESTI STANDARDI EESSÕNA NATIONAL FOREWORD See Eesti standard EVS-EN 13201-5:2015 sisaldab Euroopa standardi
More information!,p@v" DIN EN 15038 { Translation services Service requirements English version of DIN EN 15038:2006-08
DEUTSCHE NORM August 2006 DIN EN 15038 { ICS 03.080.20 Translation services Service requirements English version of DIN EN 15038:2006-08 Übersetzungs-Dienstleistungen Dienstleistungsanforderungen Englische
More informationFamily benefits Information about health insurance country. Udbetaling Danmark Kongens Vænge 8 3400 Hillerød. A. Personal data
Mail to Udbetaling Danmark Kongens Vænge 8 3400 Hillerød Family benefits Information about health insurance country A. Personal data Name Danish civil registration (CPR) number Address Telephone number
More informationThis document is a preview generated by EVS. Helmets for pedal cyclists and for users of skateboards and roller skates
EESTI STANDARD EVS-EN 1078:2012+A1:2013 Helmets for pedal cyclists and for users of skateboards and roller skates EESTI STANDARDI EESSÕNA NATIONAL FOREWORD See Eesti standard EVS-EN 1078:2012+A1:2013 sisaldab
More informationThis document is a preview generated by EVS
EESTI STANDARD EVS-EN 13718-2:2008 Meditsiinis kasutatavad liiklusvahendid ja nende varustus. Kiirabilennukid/helikopterid. Osa 2: Kiirabilennukite/helikopterite tootmis- ja tehnilised nõuded Medical vehicles
More informationFacility management Del 7: Vejledning i benchmarking af præstationer
Dansk standard DS/EN 15221-7 1. udgave 2012-11-06 Facility management Del 7: Vejledning i benchmarking af præstationer Facility Management Part 7: Guidelines for Performance Benchmarking DS/EN 15221-7
More informationSVENSK STANDARD SS-EN 61235
SVENSK STANDARD SS-EN 61235 Handläggande organ Fastställd Utgåva Sida lngår i Svenska Elektriska Kommissionen, SEK 1996-01-12 1 1 (1 +35) SEK Översikt 78 Registering Reg 421 50 30 SIS FASTSTÄLLER OCH UTGER
More informationInternational Hints and Tips
International Hints and Tips Content Q: What is the cut off time for processing International payments? A: International payments must be submitted and fully approved within the cut off time indicated
More informationHow To Write A European Standard On Sustainability Of Buildings
Dansk standard DS/EN 16309+A1 2. udgave 2014-09-18 Bæredygtighed inden for byggeri og anlæg Vurdering af bygningers sociale bæredygtighed Beregningsmetoder Sustainability of construction works Assessment
More informationThis document is a preview generated by EVS
EESTI STANDARD EVS-EN ISO 1172:2000 Klaastekstiiliga sarrusplastid. Eelimpregneeritud materjalid, presskompaundid ja laminaadid. Klaastekstiili ja mineraaltäiteaine sisalduse määramine. Kuumutamismeetodid
More informationMedicininiai sterilizatoriai. Žematemperatūriai gariniai ir formaldehidiniai sterilizatoriai. Reikalavimai ir bandymai
LIETUVOS STANDARTAS LST EN 14180 ANGLIŠKOJI VERSIJA 2014 m. rugs jis ICS 11.080.10 Pakeičia LST EN 14180:2004+A2:2009 Medicininiai sterilizatoriai. Žematemperatūriai gariniai ir formaldehidiniai sterilizatoriai.
More informationAluminium and aluminium alloys Ð Extruded rod/bar, tube and profiles Ð
BRITISH STANDARD BS EN 755-7:1998 The European Standard has the status of a British Standard ICS 23.4.15; 77.15.1 NO COPYING WITHOUT BSI PERMISSION EXCEPT AS PERMITTED BY COPYRIGHT LAW Aluminium and aluminium
More informationEnglish version. Specifications for a Web Accessibility Conformity Assessment Scheme and a Web Accessibility Quality Mark
CEN WORKSHOP CWA 15554 June 2006 AGREEMENT ICS 35.240.99 English version Specifications for a Web Accessibility Conformity Assessment Scheme and a Web Accessibility Quality Mark This CEN Workshop Agreement
More informationEnglish version. Manual for Determination of Combined Heat and Power (CHP)
CEN/CENELEC WORKSHOP CWA 45547 September 2004 AGREEMENT ICS 27.100 English version Manual for Determination of Combined Heat and Power (CHP) This CEN/CENELEC Workshop Agreement has been drafted and approved
More informationVejledning til en europæisk COREfaktura-datamodel. CII-retningslinjer for implementering Del 1: Introduktion
DS-information DS/CWA 16356-1 1. udgave 2011-11-09 Vejledning til en europæisk COREfaktura-datamodel med UN/CEFACT CII-retningslinjer for implementering Del 1: Introduktion Guide for a European CORE INVOICE
More informationEnglish Version. Services of real estate agents - Requirements for the provision of services of real estate agents
EUROPEAN STANDARD NORME EUROPÉENNE EUROPÄISCHE NORM ICS 03.080.30 English Version EN 15733 December 2009 Services of real estate agents - Requirements for the provision of services of real estate agents
More informationICS 75.160.20 Supersedes EN 228:2004. English Version. Automotive fuels - Unleaded petrol - Requirements and test methods
EUROPEAN STANDARD NORME EUROPÉENNE EUROPÄISCHE NORM EN 228 July 2008 ICS 75.160.20 Supersedes EN 228:2004 English Version Automotive fuels - Unleaded petrol - Requirements and test methods Carburants pour
More informationThis document is a preview generated by EVS
EESTI STANDARD EVS-EN 61010-2-040:2015 Safety requirements for electrical equipment for measurement, control, and laboratory use - Part 2-040 Particular requirements for sterilizers and washer-disinfectors
More information