Pricing Guide for Horizontal Above NEMA Motors Rev. 0
|
|
|
- Marshall Heath
- 7 years ago
- Views:
Transcription
1 Pricing Guide for Horizontal Above NEMA Motors Rev. 0
2 Part RevRec Page 1 Revision Record Rev. No. Section Part Page Date Description 0 All All All 11/12 NEW All information in this guide is subject to change without notice. Rev. No. Approved: Title Date 0 (Joseph Moreland) Business Manager 11/01/2012
3 Part General Page 1 General Information As one of the World s leading provider of large motors with Global service and support second to none, Siemens sells and manufactures a complete line of motors at the ISO9001 Certified Norwood, OH plant. This 350,000 square foot facility has produced over 150,000 high voltage motors continuously since The Norwood plant offers horizontal AC squirrelcage induction motors through 18,000 horsepower and voltage ranges from 460 through volts. The plant also manufactures a complete line of vertical motors. Larger induction motors as well as wound rotor and synchronous motors are also available from other Siemens plants located in Germany. The following pages covers horizontal induction motors through 5000HP. It is intended for use in pricing the more common ratings, enclosures and modifications. Special features or applications which could affect frame size and, therefore seriously impact cost and price, should be referred to factory for price and availability. Ratings that fall outside those covered in this book, as well as all vertical motors, should also be referred to factory for pricing and availability. For additional information and updates of our products and services visit our website at and click on the Large AC Above NEMA motors link. NOTE: This Pricing Guide for Horizontal Above NEMA Motors ANSP supersedes all previous issues of the Pricing Guide for Horizontal Above NEMA Motors.
4 Part General Page 2 General Information All ratings in this price guide are designed for the following; Horizontal Mounting 3 phase Class F insulation Service factor of 1.0 Maximum temperature rise of 80 degrees C by resistance at 1.0 service factor Maximum 40 degrees C ambient Altitude of 3300 feet or less Direct connection to a typical centrifugal load with rated voltage and frequency applied at the motor terminals and a load inertia value equal to or less than NEMA value for the rating. Also, during accelerating period, connected load torque shall be equal to, or less than, a torque which varies as square of the speed and is equal to 100% of fullload torque at rated speed. Frame sizes are estimated and are subject to change without notice. Frame sizes may have a suffix or combination of suffixes dependent upon enclosure, bearings, and/or features; D = Flanged. Indicates that motor is to be supplied with a Dflanged bearing housing. S = Short shaft. Indicates motor is to be supplied with Siemens standard short shaft extension for direct connection except on 680 frame series where no suffix is used. Y = Special mounting. Indicates motor is to be supplied with nonstandard mounting dimensions. Z = Special shaft. Indicates motor is to be supplied with nonstandard or special shaft dimensions. No Suffix = Indicates that motor is to be supplied with a Siemens standard long shaft extension except on 680 & 800 frame series. The long shaft is provided if Belt Drive modification is made from the Modification & Accessories Section. Some 680 frame ratings can be supplied with grease lubricated ball bearings. Refer exact requirements to factory for price and availability. Lead Times will be per the latest issue of the Norwood Product Lead Times document ANMC 70000xxxx.
5 Part Encl Page 3 Enclosures Designed To Meet All Application And Environmental Needs Horizontal Drip Proof / Weather Protected I ( CG) / IC01 / IP23 Meets or exceeds industry standards for NEMA WPtype machines. Best suited for indoor applications where not exposed to extreme ambient conditions. Available through 10,000 HP. Horizontal Drip Proof / Weather Protected II ( CGII) / IC01 / IP24 Meets or exceeds industry standards for NEMA WPIItype machines. Specifically designed for outdoor applications where motor is not likely to be protected by other structures. Available through 18,000 HP. Totally Enclosed Fan Cooled ( CZ, CGZ, 1LA4) / IC411 / IP54IP55 Designed for indoor and outdoor applications where internal parts must be protected from adverse ambient conditions. Utilizes cooling fins on all four quadrants of yoke and housings. Available through 3,000 HP. Totally Enclosed AirtoAir Cooled ( CAZ) / IC611 / IP54 Designed for indoor and outdoor applications where internal parts must be protected from adverse ambient conditions. Utilizes airtoair tubetype heat exchangers. Available through 14,000 HP.
6 Part Encl Page 4 Enclosures Designed To Meet All Application And Environmental Needs Totally Enclosed WatertoAir Cooled ( CGG) / ICW81 / IP54 Same critical design requirements as the airtoair cooled machine with the added benefit of low noise and efficient water cooling. Available through 18,000 HP.
7 Machine Readable Product Description () Structure Part Page 5 Siemens Norwood AboveNEMA motors has adopted the MachineReadable Product Designation structure (). These designations, which are very similar in structure to those used by many other Siemens Business Units, will provide a clear means of product designation. The benefits of adopting the codes include: 1) Consistent communication between regional organizations, field sales personnel and the business unit 2) Improved processes within Norwood 3) Enables smoother transition into product standardization 4) Provides a basis for product leadtimes The structure is generated by two segments: 1) Product codes 12 Alphanumeric characters which define: Enclosure Framesize Motor speed (Number of poles) Rotor construction Voltage / Frequency of construction (horizontal, vertical, flangemounted, etc) 2) Option codes Standard accessories The next several pages describe the Product Code structure for; Modular (ODP/WPI, WPII, TEAAC and TEWAC enclosures) machines. TEFC machines. In the Modifications and Accessories Section, you will find the Option Codes and Categories listed. It is important that these codes, both Product and Options, are clearly indicated on the orders. The Categories, explained in more detail later, are listed as the minimum category for the given option. The base motor category or other options with higher categories may impact the overall category of the motor. The highest category will dictate the applicable leadtime of the motor.
8 Machine Readable Product Description () Structure Part Page 6 MODULAR Sub Group Factory Data Position Z Example 1 R P E 2 H E 3 0 Z Main Group Identification 1R Induction Motor (Modular ODP/WPI, WPII, TEWAC or TEAAC) 1S Induction Motor (Modular) Hazardous Areas 3 Sub Group (Enclosuretype & Hazardous Area) 1RA ODP / WPI (IP23 / IC01), Nonhazardous Areas 1RN TEWAC (IP54 / ICW81), Nonhazardous Areas 1RP WPII (IP24 / IC01), Nonhazardous Areas 1RQ TEAAC (IP54 / IC611 or IC616), Nonhazardous Areas 1SC WPII (IP24 / IC01), Hazardous Areas (Division 2 or Zone 2) 1SG TEAAC (IP54 / IC611 or IC616), Hazardous Areas (Division 2 or Zone 2) 1SL TEWAC (IP54 / ICW81), Hazardous Areas (Division 2 or Zone 2) 4 Factory Specifics 2 2 = Norwoodbuilt Framesize Frame Frame Frame Frame Frame 7 Reserved for Factory Use E This position will contain letters for Norwoodbuilt motors 8 Number of Poles 2 2 pole motor 4 4 pole motor 6 6 pole motor 8 8 pole motor 3 10 pole motor 5 12 pole motor 7 14 pole motor 9 Refer to factory for slower speeds 9 ODP / WPI, WPII & TEWAC Standard Internal Fan Design H TEAAC = Use H Code for TEAACs with Auxiliary Blowers for (IC616) J TEAAC = Use J Code for TEAACs with ShaftMounted External Fan (IC611) 10 Rotor Motors without VFD (Line Supply Operation) Motors used with VFD B Aluminum Diecast L Low Voltage Drive Aluminum Rotor E Copperbar M Low Voltage Drive Copper Rotor N Medium Voltage Drive Aluminum Rotor V Medium Voltage Drive Copper Rotor 11 Voltage, frequency Medium / High Voltage Applications Low Voltage Applications V, 50 hz V, V, 60 hz V, 60 hz V, 60 hz V, 60 hz V, 60 hz V, 50 hz V, 60 hz V, 50 hz V, 60 hz V, V, 50 hz V, 50 hz V, V, 50 hz 8 9 other voltage/frequency 9 other voltage/frequency 12 Mounting 0 Horizontal, footmounted 1 NEMA DFlange, with feet 3 Vertical, hollow shaft 4 Vertical, solid shaft, with canopy 8 Vertical, solid shaft, without canopy 9 Other types of mounting (requires additional text) 13 Option Code Z Means that the motors will have additional options Main Group Framesize Reserved # of Poles Rotor Volts / Hz Mounting Options
9 Machine Readable Product Description () Structure Part Page 7 TEFC (All frames except SH560) Main Group S ub Group Factory Framesize Reserved # of Poles Rotor Line Supply or VFD Volts / Hz Mounting Options Data Position Z Example 1 L A E 2 L N 3 0 Z Main Group Identification 1L Induction Motor (TE FC), NonHazardous Area 1M Induction Motor (TE FC), Hazardous Area (Div. or Zone 2) 1P Induction Motor for special application (TEAO) 3 Sub Group (Enclosuretype & Hazardous Area) A TEFC, IP54, Basic Version Q TEAO Forcedventilated S TEFC, IP54, Hazardous Area (Division 2 or Zone 2) 4 Factory Specifics 2 2 = Norwoodbuilt Fra mesize 40 SH400 Frame 45 SH450 Frame Frame Frame Frame Frame Frame 7 Re served for Fa ctory Use E This position will contain letters for Norwoodbuilt motors 8 Number of Poles 2 2 pole motor 4 4 pole motor 6 6 pole motor 8 8 pole motor 3 10 pole motor 5 12 pole motor 7 14 pole motor 9 Refer to factory for slower speeds 9 Rotor L Aluminum diecast N Copperbar 10 Line Supply or VFD (LV or MV ) A Linesupply; Low V oltage (<1000 V ) M VFD; Low Voltage (<1000 V) N Linesupply; Medium Voltage (>1000 V) V VFD; Medium Voltage (>1000 V) 11 Voltage, frequency Line supply operation, MV / HV MV drive converter operation Line supply/drive converter operation, LV V, 50 hz 0 2.3kV, 50 hz V V, 60 hz kv, 60 hz V V, 60 hz kv, 50 hz V V, 50 hz kv, 60 hz V V, 60 hz kv, 50 hz V V, 60 hz kv, 60 hz 9 Other Voltages V, 50 hz V, 50 hz 9 other voltage/frequency 12 Mounting 0 Horizontal, footmounted 1 NE MA DFlange, with feet 9 Other types of mounting (requires additional text) 13 Option Code Z M eans that the motors will have additional options
10 Machine Readable Product Description () Structure Part Page 8 TEFC (SH5 60 F rame On ly ) Main Group S ub Group Factory Framesize Reserved # of Poles Rotor Line Supply or VFD Volts / Hz Mounting Options Data Position Z Example 1 L A C N 5 0 Z Upper and Main Group Identification 1L Induction Motor (TE FCIP55), NonHazardous Area 1M Induction Motor (TE FCIP55), Hazardous Area (Div. or Zone 2) 1P Induction Motor for special application (TEAO) 3 L ow er Group A Squirrelcage, basic version Q TEAO Forcedventilated S TEFC Hazardous Area (Division 2 or Zone 2) 4 Series 4 HCom pact II Shaft Height 56 SH560 Frame 7 Code for re lative le ngth of the stator core 0 Short 4 Long 2 Medium 6 Extra long 8 Number of Poles 2 2 pole motor 4 4 pole motor 6 6 pole motor 8 8 pole motor 9 Refer to factory for slower speeds 9 Rotor A Aluminum diecast C Copperbar 10 Line Supply or VFD (LV or MV ) A Linesupply; Low V oltage M Masterdrives N Linesupply; High V oltage V MV drive converters W Other drive converters 11 Voltage, frequency Line supply operation, MV / HV MV drive converter operation Line supply/drive converter operation, LV V, 50 hz 0 2.3kV, 50 hz V V, 60 hz kv, 60 hz V V, 50 hz kv, 50 hz V V, 60 hz kv, 60 hz V V, 60 hz kv, 50 hz V V, 50 hz kv, 60 hz 9 Other Voltages V, 50 hz 9 other voltage/frequency 12 Mounting 0 Horizontal, footmounted 9 Other types of mounting (requires additional text) 13 Option Code Z M eans that the motors will have additional options
11 Part Index Page 9 Index Page Part 1 ODP Enclosure 60 Hertz 110 Part 2 WPI Enclosure 60 Hertz 110 Part 3 WPII Enclosure 60 Hertz 110 Part 4 TEWAC Enclosure 60 Hertz 17 Part 5 TEFC Enclosure 60 Hertz 110 Part 6 TEAAC Enclosure 60 Hertz 17 Part 1A ODP Enclosure 50 Hertz 13 Part 2A WPI Enclosure 50 Hertz 13 Part 3A WPII Enclosure 50 Hertz 13 Part 4A TEWAC Enclosure 50 Hertz 12 Part 5A TEFC Enclosure 50 Hertz 12 Part 6A TEAAC Enclosure 50 Hertz 12 Part 5B TEFC Enclosure per IEEE 841 Std Section 2 Modifications & Accessories Adjustable Speed Drives 1 Altitude 2 Ambient 2 API rd or 4 th Editions 3 API Assembly 7 Balance Precision Balance for Low Vibration 7 Balance Special 7 Bearings Insulation 8 Bearings Systems 8 Bearings Oil Sump Heaters 8 Bearing Protective Devices Mechanical 9 Bearing Protective Devices Temperature 1011 Bearings Sleeve 12 Belt Drive Applications 13 Cancellation Charges 14 Chipper/Crusher Drives 14 Couplings 15 Current Transformers 15 Differential Pressure Switch 15 Direction of 15 All information in this guide is subject to change without notice. Please contact your local Siemens sales representative for information or assistance with any ratings or modifications not found in this book or with any Siemens products.
12 Part Index Page 10 Index Section 2 Modifications & Accessories continued Page Efficiency Higher Than Standard 15 Export Packaging 16 Fan External 1617 Fan Housing 17 Filters 18 Flanges 18 Freight 18 Frequency 50 Hertz 18 Ground Pads 19 Hardware 19 Hazardous Location / Temperature Code 19 IEEE Inrush Current 19 Insulation 20 Load Inertia 20 Noise Requirements 21 Paint Systems 22 Rotor / Corrosion Protection 22 Service Factor 23 Shaft Extension 23 Shaft Seal 23 Shipment Terms & Packaging 24 Software Packages 24 Soleplates / Slide Rails / Shims 24 Space Heaters 25 Starting Reduced Voltage/Soft Start 25 Startup Assistance 25 Stator Connections 25 Stator Insulation/Treatments 26 Stator Protective Devices 26 Terminal Boxes / Differential & Surge Protection / Current Transformers / Standoff Insulators 2728 Tests 2930 Torques NonStandard 31 Voltages 31 Warranty Offerings 31 All information in this guide is subject to change without notice. Please contact your local Siemens sales representative for information or assistance with any ratings or modifications not found in this book or with any Siemens products.
13 ODP ENCLOSURE 60 Hertz 460 Volt s & Part 1 Page $45,956 Alum. Diecast Ball Grease Lube Self Unidirectional CG 1RA25062BA $41,605 Alum. Diecast Ball Grease Lube Self Bidirectional CG 1RA25074BA $42,909 Alum. Diecast Ball Grease Lube Self Bidirectional CG 1RA25106BA $44,841 Alum. Diecast Ball Grease Lube Self Bidirectional CG 1RA25128BA $55,192 Alum. Diecast Ball Grease Lube Self Bidirectional CG 1RA26123BA $55,753 Alum. Diecast Ball Grease Lube Self Bidirectional CG 1RA26145BA $93,427 Copper Bar Ball Grease Lube Self Bidirectional CG 1RA26187BD $93,427 Copper Bar Ball Grease Lube Self Bidirectional CG 1RA26189BD $46,690 Alum. Diecast Ball Grease Lube Self Unidirectional CG 1RA25062BA $42,909 Alum. Diecast Ball Grease Lube Self Bidirectional CG 1RA25104BA $44,841 Alum. Diecast Ball Grease Lube Self Bidirectional CG 1RA25126BA $47,127 Alum. Diecast Ball Grease Lube Self Bidirectional CG 1RA25148BA $56,060 Alum. Diecast Ball Grease Lube Self Bidirectional CG 1RA26123BA $67,335 Alum. Diecast Ball Grease Lube Self Bidirectional CG 1RA26165BA $96,326 Copper Bar Ball Grease Lube Self Bidirectional CG 1RA26217BD $46,540 Alum. Diecast Ball Grease Lube Self Unidirectional CG 1RA25082BA $43,551 Alum. Diecast Ball Grease Lube Self Bidirectional CG 1RA25104BA $47,127 Alum. Diecast Ball Grease Lube Self Bidirectional CG 1RA25146BA $50,971 Alum. Diecast Ball Grease Lube Self Bidirectional CG 1RA25188BA $59,271 Alum. Diecast Ball Grease Lube Self Bidirectional CG 1RA26143BA $76,037 Alum. Diecast Ball Grease Lube Self Bidirectional CG 1RA26185BA $102,098 Copper Bar Ball Grease Lube Self Bidirectional CG 1RA26237BD $47,260 Alum. Diecast Ball Grease Lube Self Unidirectional CG 1RA25082BA $44,841 Alum. Diecast Ball Grease Lube Self Bidirectional CG 1RA25124BA $49,053 Alum. Diecast Ball Grease Lube Self Bidirectional CG 1RA25166BA $53,717 Alum. Diecast Ball Grease Lube Self Bidirectional CG 1RA25218BA $67,335 Alum. Diecast Ball Grease Lube Self Bidirectional CG 1RA26163BA $84,710 Alum. Diecast Ball Grease Lube Self Bidirectional CG 1RA26235BA $48,537 Alum. Diecast Ball Grease Lube Self Unidirectional CG 1RA25112BA $47,127 Alum. Diecast Ball Grease Lube Self Bidirectional CG 1RA25144BA $49,787 Alum. Diecast Ball Grease Lube Self Bidirectional CG 1RA25166BA $61,587 Alum. Diecast Ball Grease Lube Self Bidirectional CG 1RA25258BA $76,037 Alum. Diecast Ball Grease Lube Self Bidirectional CG 1RA26183BA $96,421 Alum. Diecast Ball Grease Lube Self Bidirectional CG 1RA26255BA $49,288 Alum. Diecast Ball Grease Lube Self Unidirectional CG 1RA25112BA $47,832 Alum. Diecast Ball Grease Lube Self Bidirectional CG 1RA25144BA $58,389 Alum. Diecast Ball Grease Lube Self Bidirectional CG 1RA25216BA $65,714 Alum. Diecast Ball Grease Lube Self Bidirectional CG 1RA25308BA $78,939 Alum. Diecast Ball Grease Lube Self Bidirectional CG 1RA26213BA $117,668 Copper Bar Ball Grease Lube Self Bidirectional CG 1RA26275BD $52,884 Alum. Diecast Ball Grease Lube Self Unidirectional CG 1RA25132BA $49,053 Alum. Diecast Ball Grease Lube Self Bidirectional CG 1RA25164BA $62,050 Alum. Diecast Ball Grease Lube Self Bidirectional CG 1RA25256BA $76,037 Alum. Diecast Ball Grease Lube Self Bidirectional CG 1RA26188BA $84,710 Alum. Diecast Ball Grease Lube Self Bidirectional CG 1RA26233BA $119,489 Copper Bar Ball Grease Lube Self Bidirectional CG 1RA26275BD10
14 ODP ENCLOSURE 60 Hertz 460 Volt s & Part 1 Page $53,703 Alum. Diecast Ball Grease Lube Self Unidirectional CG 1RA25132BA $50,971 Alum. Diecast Ball Grease Lube Self Bidirectional CG 1RA25184BA $63,885 Alum. Diecast Ball Grease Lube Self Bidirectional CG 1RA25276BA $78,939 Alum. Diecast Ball Grease Lube Self Bidirectional CG 1RA26218BA $100,280 Alum. Diecast Ball Grease Lube Self Bidirectional CG 1RA26273BA $57,244 Alum. Diecast Ball Grease Lube Self Unidirectional CG 1RA25152BA $58,389 Alum. Diecast Ball Grease Lube Self Bidirectional CG 1RA25214BA $76,037 Alum. Diecast Ball Grease Lube Self Bidirectional CG 1RA26186BA $96,421 Alum. Diecast Ball Grease Lube Self Bidirectional CG 1RA26258BA $65,665 Alum. Diecast Ball Grease Lube Self Unidirectional CG 1RA25162BA $60,218 Alum. Diecast Ball Grease Lube Self Bidirectional CG 1RA25234BA $78,939 Alum. Diecast Ball Grease Lube Self Bidirectional CG 1RA26216BA $100,280 Alum. Diecast Ball Grease Lube Self Bidirectional CG 1RA26278BA10
15 ODP ENCLOSURE 60 Hertz 2300 Volt s & Part 1 Page $47,491 Alum. Diecast Ball Grease Lube Self Unidirectional CG 1RA25082BB $43,820 Alum. Diecast Ball Grease Lube Self Bidirectional CG 1RA25104BB $43,820 Alum. Diecast Ball Grease Lube Self Bidirectional CG 1RA25106BB $45,749 Alum. Diecast Ball Grease Lube Self Bidirectional CG 1RA25128BB $57,536 Alum. Diecast Ball Grease Lube Self Bidirectional CG 1RA26123BB $58,704 Alum. Diecast Ball Grease Lube Self Bidirectional CG 1RA26145BB $97,262 Copper Bar Ball Grease Lube Self Bidirectional CG 1RA26217BE $171,327 Copper Bar Sleeve Oil Lube Self Bidirectional CG 1RA27189BE $48,226 Alum. Diecast Ball Grease Lube Self Unidirectional CG 1RA25082BB $44,476 Alum. Diecast Ball Grease Lube Self Bidirectional CG 1RA25104BB $45,749 Alum. Diecast Ball Grease Lube Self Bidirectional CG 1RA25126BB $49,965 Alum. Diecast Ball Grease Lube Self Bidirectional CG 1RA25168BB $58,440 Alum. Diecast Ball Grease Lube Self Bidirectional CG 1RA26123BB $77,570 Alum. Diecast Ball Grease Lube Self Bidirectional CG 1RA26185BB $103,976 Copper Bar Ball Grease Lube Self Bidirectional CG 1RA26237BE $174,038 Copper Bar Sleeve Oil Lube Self Bidirectional CG 1RA27189BE $48,984 Alum. Diecast Ball Grease Lube Self Unidirectional CG 1RA25082BB $45,749 Alum. Diecast Ball Grease Lube Self Bidirectional CG 1RA25124BB $48,035 Alum. Diecast Ball Grease Lube Self Bidirectional CG 1RA25146BB $54,637 Alum. Diecast Ball Grease Lube Self Bidirectional CG 1RA25218BB $61,125 Alum. Diecast Ball Grease Lube Self Bidirectional CG 1RA26143BB $79,875 Alum. Diecast Ball Grease Lube Self Bidirectional CG 1RA26215BB $117,780 Copper Bar Ball Grease Lube Self Bidirectional CG 1RA26277BE $176,836 Copper Bar Sleeve Oil Lube Self Bidirectional CG 1RA27189BE $49,767 Alum. Diecast Ball Grease Lube Self Unidirectional CG 1RA25082BB $48,035 Alum. Diecast Ball Grease Lube Self Bidirectional CG 1RA25144BB $49,965 Alum. Diecast Ball Grease Lube Self Bidirectional CG 1RA25166BB $64,799 Alum. Diecast Ball Grease Lube Self Bidirectional CG 1RA25278BB $69,402 Alum. Diecast Ball Grease Lube Self Bidirectional CG 1RA26163BB $86,588 Alum. Diecast Ball Grease Lube Self Bidirectional CG 1RA26235BB $171,327 Copper Bar Sleeve Oil Lube Self Bidirectional CG 1RA27187BE $180,664 Copper Bar Sleeve Oil Lube Self Bidirectional CG 1RA27219BE $50,662 Alum. Diecast Ball Grease Lube Self Unidirectional CG 1RA25112BB $48,754 Alum. Diecast Ball Grease Lube Self Bidirectional CG 1RA25144BB $51,894 Alum. Diecast Ball Grease Lube Self Bidirectional CG 1RA25186BB $66,634 Alum. Diecast Ball Grease Lube Self Bidirectional CG 1RA25308BB $77,570 Alum. Diecast Ball Grease Lube Self Bidirectional CG 1RA26183BB $96,814 Alum. Diecast Ball Grease Lube Self Bidirectional CG 1RA26255BB $177,763 Copper Bar Sleeve Oil Lube Self Bidirectional CG 1RA27217BE $183,522 Copper Bar Sleeve Oil Lube Self Bidirectional CG 1RA27219BE50
16 ODP ENCLOSURE 60 Hertz 2300 Volt s & Part 1 Page $51,446 Alum. Diecast Ball Grease Lube Self Unidirectional CG 1RA25112BB $49,965 Alum. Diecast Ball Grease Lube Self Bidirectional CG 1RA25164BB $59,307 Alum. Diecast Ball Grease Lube Self Bidirectional CG 1RA25216BB $77,570 Alum. Diecast Ball Grease Lube Self Bidirectional CG 1RA26188BB $79,875 Alum. Diecast Ball Grease Lube Self Bidirectional CG 1RA26213BB $117,780 Copper Bar Ball Grease Lube Self Bidirectional CG 1RA26275BE $180,576 Copper Bar Sleeve Oil Lube Self Bidirectional CG 1RA27217BE $190,617 Copper Bar Sleeve Oil Lube Self Bidirectional CG 1RA27259BE $52,255 Alum. Diecast Ball Grease Lube Self Unidirectional CG 1RA25112BB $50,713 Alum. Diecast Ball Grease Lube Self Bidirectional CG 1RA25164BB $62,782 Alum. Diecast Ball Grease Lube Self Bidirectional CG 1RA25256BB $79,875 Alum. Diecast Ball Grease Lube Self Bidirectional CG 1RA26218BB $86,588 Alum. Diecast Ball Grease Lube Self Bidirectional CG 1RA26233BB $171,327 Copper Bar Sleeve Oil Lube Self Bidirectional CG 1RA27185BE $190,617 Copper Bar Sleeve Oil Lube Self Bidirectional CG 1RA27257BE $197,047 Copper Bar Sleeve Oil Lube Self Bidirectional CG 1RA27279BE $53,832 Alum. Diecast Ball Grease Lube Self Unidirectional CG 1RA25132BB $51,894 Alum. Diecast Ball Grease Lube Self Bidirectional CG 1RA25184BB $64,799 Alum. Diecast Ball Grease Lube Self Bidirectional CG 1RA25276BB $96,814 Alum. Diecast Ball Grease Lube Self Bidirectional CG 1RA26258BB $100,393 Alum. Diecast Ball Grease Lube Self Bidirectional CG 1RA26273BB $177,763 Copper Bar Sleeve Oil Lube Self Bidirectional CG 1RA27215BE $201,748 Copper Bar Sleeve Oil Lube Self Bidirectional CG 1RA27307BE $208,181 Copper Bar Sleeve Oil Lube Self Bidirectional CG 1RA27329BE $54,666 Alum. Diecast Ball Grease Lube Self Unidirectional CG 1RA25132BB $60,985 Alum. Diecast Ball Grease Lube Self Bidirectional CG 1RA25234BB $79,875 Alum. Diecast Ball Grease Lube Self Bidirectional CG 1RA26216BB $100,393 Alum. Diecast Ball Grease Lube Self Bidirectional CG 1RA26278BB $177,763 Copper Bar Sleeve Oil Lube Self Bidirectional CG 1RA27213BE $184,190 Copper Bar Sleeve Oil Lube Self Bidirectional CG 1RA27235BE $228,003 Copper Bar Sleeve Oil Lube Self Bidirectional CG 1RA27347BE $253,720 Copper Bar Sleeve Oil Lube Self Bidirectional CG 1RA27439BE $58,186 Alum. Diecast Ball Grease Lube Self Unidirectional CG 1RA25152BB $64,799 Alum. Diecast Ball Grease Lube Self Bidirectional CG 1RA25274BB $81,111 Alum. Diecast Ball Grease Lube Self Bidirectional CG 1RA26216BB $117,780 Copper Bar Ball Grease Lube Self Bidirectional CG 1RA26278BE $190,617 Copper Bar Sleeve Oil Lube Self Bidirectional CG 1RA27253BE $197,047 Copper Bar Sleeve Oil Lube Self Bidirectional CG 1RA27275BE $247,287 Copper Bar Sleeve Oil Lube Self Bidirectional CG 1RA27417BE $66,610 Alum. Diecast Ball Grease Lube Self Unidirectional CG 1RA25162BB $65,769 Alum. Diecast Ball Grease Lube Self Bidirectional CG 1RA25274BB $86,588 Alum. Diecast Ball Grease Lube Self Bidirectional CG 1RA26236BB $133,445 Copper Bar Ball Grease Lube Self Bidirectional CG 1RA26328BE $193,633 Copper Bar Sleeve Oil Lube Self Bidirectional CG 1RA27253BE $201,748 Copper Bar Sleeve Oil Lube Self Bidirectional CG 1RA27305BE $253,720 Copper Bar Sleeve Oil Lube Self Bidirectional CG 1RA27437BE50
17 ODP ENCLOSURE 60 Hertz 2300 Volt s & Part 1 Page $69,790 Alum. Diecast Ball Grease Lube Self Unidirectional CG 1RA25182BB $82,549 Alum. Diecast Ball Grease Lube Self Bidirectional CG 1RA26214BB $117,780 Copper Bar Ball Grease Lube Self Bidirectional CG 1RA26276BE $144,463 Copper Bar Ball Grease Lube Self Bidirectional CG 1RA26368BE $197,047 Copper Bar Sleeve Oil Lube Self Bidirectional CG 1RA27273BE $234,436 Copper Bar Sleeve Oil Lube Self Bidirectional CG 1RA27365BE $76,125 Alum. Diecast Ball Grease Lube Self Unidirectional CG 1RA25232BB $96,814 Alum. Diecast Ball Grease Lube Self Bidirectional CG 1RA26254BB $133,445 Copper Bar Ball Grease Lube Self Bidirectional CG 1RA26326BE $182,464 Copper Bar Sleeve Oil Lube Self Bidirectional CG 1RA27258BE $228,003 Copper Bar Sleeve Oil Lube Self Bidirectional CG 1RA27343BE $253,720 Copper Bar Sleeve Oil Lube Self Bidirectional CG 1RA27435BE $94,249 Alum. Diecast Ball Grease Lube Self Unidirectional CG 1RA26232BB $100,393 Alum. Diecast Ball Grease Lube Self Bidirectional CG 1RA26274BB $144,463 Copper Bar Ball Grease Lube Self Bidirectional CG 1RA26366BE $195,327 Copper Bar Sleeve Oil Lube Self Bidirectional CG 1RA27308BE $247,287 Copper Bar Sleeve Oil Lube Self Bidirectional CG 1RA27413BE $95,741 Alum. Diecast Ball Grease Lube Self Unidirectional CG 1RA26232BB $113,759 Alum. Diecast Ball Grease Lube Self Bidirectional CG 1RA26324BB $195,327 Copper Bar Sleeve Oil Lube Self Bidirectional CG 1RA27306BE $228,003 Copper Bar Sleeve Oil Lube Self Bidirectional CG 1RA27368BE $253,720 Copper Bar Sleeve Oil Lube Self Bidirectional CG 1RA27433BE $105,427 Alum. Diecast Sleeve Oil Lube Self Unidirectional CG 1RA26232BB $144,095 Copper Bar Ball Grease Lube Self Bidirectional CG 1RA26364BE $221,579 Copper Bar Sleeve Oil Lube Self Bidirectional CG 1RA27346BE $240,863 Copper Bar Sleeve Oil Lube Self Bidirectional CG 1RA27418BE $125,783 Alum. Diecast Sleeve Oil Lube Self Unidirectional CG 1RA26272BB $175,617 Copper Bar Sleeve Oil Lube Self Bidirectional CG 1RA27254BE $234,436 Copper Bar Sleeve Oil Lube Self Bidirectional CG 1RA27386BE $134,029 Alum. Diecast Sleeve Oil Lube Self Unidirectional CG 1RA26322BB $180,439 Copper Bar Sleeve Oil Lube Self Bidirectional CG 1RA27274BE $240,863 Copper Bar Sleeve Oil Lube Self Bidirectional CG 1RA27416BE $183,920 Copper Bar Sleeve Oil Lube Self Unidirectional CG 1RA27232BE $203,978 Copper Bar Sleeve Oil Lube Self Bidirectional CG 1RA27324BE $210,856 Copper Bar Sleeve Oil Lube Self Unidirectional CG 1RA27272BE $216,832 Copper Bar Sleeve Oil Lube Self Bidirectional CG 1RA27364BE $217,454 Copper Bar Sleeve Oil Lube Self Unidirectional CG 1RA27302BE $229,695 Copper Bar Sleeve Oil Lube Self Bidirectional CG 1RA27414BE $224,054 Copper Bar Sleeve Oil Lube Self Unidirectional CG 1RA27322BE $230,661 Copper Bar Sleeve Oil Lube Self Unidirectional CG 1RA27342BE50 Ratings highlighted in yellow are not suitable for use with an Adjustable Speed Drive application. Refer to factory for price and availability.
18 ODP ENCLOSURE 60 Hertz 4000 Volt s & Part 1 Page $48,912 Alum. Diecast Ball Grease Lube Self Unidirectional CG 1RA25082BB $45,201 Alum. Diecast Ball Grease Lube Self Bidirectional CG 1RA25104BB $45,201 Alum. Diecast Ball Grease Lube Self Bidirectional CG 1RA25106BB $49,413 Alum. Diecast Ball Grease Lube Self Bidirectional CG 1RA25148BB $58,796 Alum. Diecast Ball Grease Lube Self Bidirectional CG 1RA26123BB $70,470 Alum. Diecast Ball Grease Lube Self Bidirectional CG 1RA26165BB $104,595 Copper Bar Ball Grease Lube Self Bidirectional CG 1RA26237BE $172,349 Copper Bar Sleeve Oil Lube Self Bidirectional CG 1RA27189BE $49,669 Alum. Diecast Ball Grease Lube Self Unidirectional CG 1RA25082BB $45,877 Alum. Diecast Ball Grease Lube Self Bidirectional CG 1RA25104BB $47,127 Alum. Diecast Ball Grease Lube Self Bidirectional CG 1RA25126BB $53,265 Alum. Diecast Ball Grease Lube Self Bidirectional CG 1RA25188BB $62,131 Alum. Diecast Ball Grease Lube Self Bidirectional CG 1RA26143BB $78,881 Alum. Diecast Ball Grease Lube Self Bidirectional CG 1RA26185BB $106,214 Copper Bar Ball Grease Lube Self Bidirectional CG 1RA26237BE $175,076 Copper Bar Sleeve Oil Lube Self Bidirectional CG 1RA27189BE $50,450 Alum. Diecast Ball Grease Lube Self Unidirectional CG 1RA25082BB $47,127 Alum. Diecast Ball Grease Lube Self Bidirectional CG 1RA25124BB $49,413 Alum. Diecast Ball Grease Lube Self Bidirectional CG 1RA25146BB $62,363 Alum. Diecast Ball Grease Lube Self Bidirectional CG 1RA25238BB $70,470 Alum. Diecast Ball Grease Lube Self Bidirectional CG 1RA26163BB $81,991 Alum. Diecast Ball Grease Lube Self Bidirectional CG 1RA26215BB $172,349 Copper Bar Sleeve Oil Lube Self Bidirectional CG 1RA27187BE $178,782 Copper Bar Sleeve Oil Lube Self Bidirectional CG 1RA27219BE $51,256 Alum. Diecast Ball Grease Lube Self Unidirectional CG 1RA25082BB $49,413 Alum. Diecast Ball Grease Lube Self Bidirectional CG 1RA25144BB $51,345 Alum. Diecast Ball Grease Lube Self Bidirectional CG 1RA25166BB $66,171 Alum. Diecast Ball Grease Lube Self Bidirectional CG 1RA25278BB $78,881 Alum. Diecast Ball Grease Lube Self Bidirectional CG 1RA26183BB $87,207 Alum. Diecast Ball Grease Lube Self Bidirectional CG 1RA26235BB $178,782 Copper Bar Sleeve Oil Lube Self Bidirectional CG 1RA27217BE $181,611 Copper Bar Sleeve Oil Lube Self Bidirectional CG 1RA27219BE $52,082 Alum. Diecast Ball Grease Lube Self Unidirectional CG 1RA25112BB $50,153 Alum. Diecast Ball Grease Lube Self Bidirectional CG 1RA25144BB $53,265 Alum. Diecast Ball Grease Lube Self Bidirectional CG 1RA25186BB $82,029 Copper Bar Ball Grease Lube Self Bidirectional CG 1RA25308BE $81,991 Alum. Diecast Ball Grease Lube Self Bidirectional CG 1RA26213BB $98,921 Alum. Diecast Ball Grease Lube Self Bidirectional CG 1RA26255BB $181,611 Copper Bar Sleeve Oil Lube Self Bidirectional CG 1RA27217BE $185,209 Copper Bar Sleeve Oil Lube Self Bidirectional CG 1RA27239BE40
19 ODP ENCLOSURE 60 Hertz 4000 Volt s & Part 1 Page $52,889 Alum. Diecast Ball Grease Lube Self Unidirectional CG 1RA25112BB $51,345 Alum. Diecast Ball Grease Lube Self Bidirectional CG 1RA25164BB $60,676 Alum. Diecast Ball Grease Lube Self Bidirectional CG 1RA25216BB $78,881 Alum. Diecast Ball Grease Lube Self Bidirectional CG 1RA26188BB $87,207 Alum. Diecast Ball Grease Lube Self Bidirectional CG 1RA26233BB $119,003 Copper Bar Ball Grease Lube Self Bidirectional CG 1RA26275BE $185,209 Copper Bar Sleeve Oil Lube Self Bidirectional CG 1RA27237BE $198,069 Copper Bar Sleeve Oil Lube Self Bidirectional CG 1RA27279BE $53,720 Alum. Diecast Ball Grease Lube Self Unidirectional CG 1RA25112BB $52,114 Alum. Diecast Ball Grease Lube Self Bidirectional CG 1RA25164BB $64,342 Alum. Diecast Ball Grease Lube Self Bidirectional CG 1RA25256BB $81,991 Alum. Diecast Ball Grease Lube Self Bidirectional CG 1RA26218BB $101,616 Alum. Diecast Ball Grease Lube Self Bidirectional CG 1RA26273BB $178,782 Copper Bar Sleeve Oil Lube Self Bidirectional CG 1RA27215BE $191,642 Copper Bar Sleeve Oil Lube Self Bidirectional CG 1RA27257BE $202,763 Copper Bar Sleeve Oil Lube Self Bidirectional CG 1RA27309BE $55,256 Alum. Diecast Ball Grease Lube Self Unidirectional CG 1RA25132BB $53,265 Alum. Diecast Ball Grease Lube Self Bidirectional CG 1RA25184BB $66,171 Alum. Diecast Ball Grease Lube Self Bidirectional CG 1RA25276BB $98,921 Alum. Diecast Ball Grease Lube Self Bidirectional CG 1RA26258BB $172,349 Copper Bar Sleeve Oil Lube Self Bidirectional CG 1RA27183BE $181,611 Copper Bar Sleeve Oil Lube Self Bidirectional CG 1RA27215BE $202,763 Copper Bar Sleeve Oil Lube Self Bidirectional CG 1RA27307BE $237,701 Copper Bar Sleeve Oil Lube Self Bidirectional CG 1RA27369BE $56,111 Alum. Diecast Ball Grease Lube Self Unidirectional CG 1RA25132BB $62,363 Alum. Diecast Ball Grease Lube Self Bidirectional CG 1RA25234BB $81,991 Alum. Diecast Ball Grease Lube Self Bidirectional CG 1RA26216BB $101,616 Alum. Diecast Ball Grease Lube Self Bidirectional CG 1RA26278BB $178,782 Copper Bar Sleeve Oil Lube Self Bidirectional CG 1RA27213BE $185,209 Copper Bar Sleeve Oil Lube Self Bidirectional CG 1RA27235BE $231,274 Copper Bar Sleeve Oil Lube Self Bidirectional CG 1RA27347BE $256,988 Copper Bar Sleeve Oil Lube Self Bidirectional CG 1RA27439BE $59,604 Alum. Diecast Ball Grease Lube Self Unidirectional CG 1RA25152BB $66,171 Alum. Diecast Ball Grease Lube Self Bidirectional CG 1RA25274BB $87,207 Alum. Diecast Ball Grease Lube Self Bidirectional CG 1RA26236BB $119,003 Copper Bar Ball Grease Lube Self Bidirectional CG 1RA26278BE $191,642 Copper Bar Sleeve Oil Lube Self Bidirectional CG 1RA27253BE $198,069 Copper Bar Sleeve Oil Lube Self Bidirectional CG 1RA27275BE $250,561 Copper Bar Sleeve Oil Lube Self Bidirectional CG 1RA27417BE $68,027 Alum. Diecast Ball Grease Lube Self Unidirectional CG 1RA25162BB $67,162 Alum. Diecast Ball Grease Lube Self Bidirectional CG 1RA25274BB $98,921 Alum. Diecast Ball Grease Lube Self Bidirectional CG 1RA26256BB $134,671 Copper Bar Ball Grease Lube Self Bidirectional CG 1RA26328BE $198,069 Copper Bar Sleeve Oil Lube Self Bidirectional CG 1RA27273BE $202,763 Copper Bar Sleeve Oil Lube Self Bidirectional CG 1RA27305BE40
20 ODP ENCLOSURE 60 Hertz 4000 Volt s & Part 1 Page $71,201 Alum. Diecast Ball Grease Lube Self Unidirectional CG 1RA25182BB $83,701 Alum. Diecast Ball Grease Lube Self Bidirectional CG 1RA26214BB $119,003 Copper Bar Ball Grease Lube Self Bidirectional CG 1RA26276BE $145,686 Copper Bar Ball Grease Lube Self Bidirectional CG 1RA26368BE $202,763 Copper Bar Sleeve Oil Lube Self Bidirectional CG 1RA27303BE $237,701 Copper Bar Sleeve Oil Lube Self Bidirectional CG 1RA27365BE $77,546 Alum. Diecast Ball Grease Lube Self Unidirectional CG 1RA25232BB $98,921 Alum. Diecast Ball Grease Lube Self Bidirectional CG 1RA26254BB $134,671 Copper Bar Ball Grease Lube Self Bidirectional CG 1RA26326BE $183,474 Copper Bar Sleeve Oil Lube Self Bidirectional CG 1RA27258BE $237,701 Copper Bar Sleeve Oil Lube Self Bidirectional CG 1RA27363BE $256,988 Copper Bar Sleeve Oil Lube Self Bidirectional CG 1RA27435BE $97,212 Alum. Diecast Ball Grease Lube Self Unidirectional CG 1RA26232BB $101,616 Alum. Diecast Ball Grease Lube Self Bidirectional CG 1RA26274BB $145,686 Copper Bar Ball Grease Lube Self Bidirectional CG 1RA26366BE $196,336 Copper Bar Sleeve Oil Lube Self Bidirectional CG 1RA27308BE $256,988 Copper Bar Sleeve Oil Lube Self Bidirectional CG 1RA27433BE $98,750 Alum. Diecast Ball Grease Lube Self Unidirectional CG 1RA26232BB $121,098 Alum. Diecast Ball Grease Lube Self Bidirectional CG 1RA26344BB $196,336 Copper Bar Sleeve Oil Lube Self Bidirectional CG 1RA27306BE $231,274 Copper Bar Sleeve Oil Lube Self Bidirectional CG 1RA27368BE $261,054 Copper Bar Sleeve Oil Lube Self Bidirectional CG 1RA27433BE $108,485 Alum. Diecast Sleeve Oil Lube Self Unidirectional CG 1RA26232BB $145,320 Copper Bar Ball Grease Lube Self Bidirectional CG 1RA26364BE $224,847 Copper Bar Sleeve Oil Lube Self Bidirectional CG 1RA27346BE $244,137 Copper Bar Sleeve Oil Lube Self Bidirectional CG 1RA27418BE $138,322 Alum. Diecast Sleeve Oil Lube Self Unidirectional CG 1RA26322BB $176,636 Copper Bar Sleeve Oil Lube Self Bidirectional CG 1RA27254BE $237,701 Copper Bar Sleeve Oil Lube Self Bidirectional CG 1RA27386BE $140,382 Alum. Diecast Sleeve Oil Lube Self Unidirectional CG 1RA26322BB $181,464 Copper Bar Sleeve Oil Lube Self Bidirectional CG 1RA27274BE $244,137 Copper Bar Sleeve Oil Lube Self Bidirectional CG 1RA27416BE $184,955 Copper Bar Sleeve Oil Lube Self Unidirectional CG 1RA27232BE $207,249 Copper Bar Sleeve Oil Lube Self Bidirectional CG 1RA27324BE $214,220 Copper Bar Sleeve Oil Lube Self Unidirectional CG 1RA27272BE $220,109 Copper Bar Sleeve Oil Lube Self Bidirectional CG 1RA27364BE $220,815 Copper Bar Sleeve Oil Lube Self Unidirectional CG 1RA27302BE $232,960 Copper Bar Sleeve Oil Lube Self Bidirectional CG 1RA27414BE $227,415 Copper Bar Sleeve Oil Lube Self Unidirectional CG 1RA27322BE $234,019 Copper Bar Sleeve Oil Lube Self Unidirectional CG 1RA27342BE40 Ratings highlighted in yellow are not suitable for use with an Adjustable Speed Drive application. Refer to factory for price and availability.
21 ODP ENCLOSURE 60 Hertz 6600 Volt s & Part 1 Page $53,537 Alum. Diecast Ball Grease Lube Self Bidirectional CG 1RA25144BB $54,338 Alum. Diecast Ball Grease Lube Self Bidirectional CG 1RA25144BB $84,262 Alum. Diecast Ball Grease Lube Self Bidirectional CG 1RA26216BB $81,152 Alum. Diecast Ball Grease Lube Self Bidirectional CG 1RA26188BB $175,617 Copper Bar Sleeve Oil Lube Self Bidirectional CG 1RA27183BE $175,617 Copper Bar Sleeve Oil Lube Self Bidirectional CG 1RA27185BE $55,159 Alum. Diecast Ball Grease Lube Self Unidirectional CG 1RA25112BB $55,463 Alum. Diecast Ball Grease Lube Self Bidirectional CG 1RA25164BB $85,567 Alum. Diecast Ball Grease Lube Self Bidirectional CG 1RA26216BB $82,409 Alum. Diecast Ball Grease Lube Self Bidirectional CG 1RA26188BB $178,396 Copper Bar Sleeve Oil Lube Self Bidirectional CG 1RA27183BE $182,047 Copper Bar Sleeve Oil Lube Self Bidirectional CG 1RA27215BE $56,012 Alum. Diecast Ball Grease Lube Self Unidirectional CG 1RA25112BB $62,581 Alum. Diecast Ball Grease Lube Self Bidirectional CG 1RA25184BB $86,912 Alum. Diecast Ball Grease Lube Self Bidirectional CG 1RA26216BB $84,262 Alum. Diecast Ball Grease Lube Self Bidirectional CG 1RA26218BB $182,047 Copper Bar Sleeve Oil Lube Self Bidirectional CG 1RA27213BE $184,927 Copper Bar Sleeve Oil Lube Self Bidirectional CG 1RA27215BE $201,336 Copper Bar Sleeve Oil Lube Self Bidirectional CG 1RA27277BE $59,518 Alum. Diecast Ball Grease Lube Self Unidirectional CG 1RA25132BB $64,799 Alum. Diecast Ball Grease Lube Self Bidirectional CG 1RA25214BB $88,300 Alum. Diecast Ball Grease Lube Self Bidirectional CG 1RA26216BB $106,515 Alum. Diecast Ball Grease Lube Self Bidirectional CG 1RA26278BB $184,927 Copper Bar Sleeve Oil Lube Self Bidirectional CG 1RA27213BE $188,477 Copper Bar Sleeve Oil Lube Self Bidirectional CG 1RA27235BE $206,037 Copper Bar Sleeve Oil Lube Self Bidirectional CG 1RA27307BE $69,247 Alum. Diecast Ball Grease Lube Self Unidirectional CG 1RA25162BB $66,481 Alum. Diecast Ball Grease Lube Self Bidirectional CG 1RA25234BB $101,735 Alum. Diecast Ball Grease Lube Self Bidirectional CG 1RA26256BB $123,902 Copper Bar Ball Grease Lube Self Bidirectional CG 1RA26278BE $187,900 Copper Bar Sleeve Oil Lube Self Bidirectional CG 1RA27213BE $201,336 Copper Bar Sleeve Oil Lube Self Bidirectional CG 1RA27275BE $240,975 Copper Bar Sleeve Oil Lube Self Bidirectional CG 1RA27367BE $70,319 Alum. Diecast Ball Grease Lube Self Unidirectional CG 1RA25162BB $68,460 Alum. Diecast Ball Grease Lube Self Bidirectional CG 1RA25254BB $119,122 Copper Bar Ball Grease Lube Self Bidirectional CG 1RA26256BE $133,445 Copper Bar Ball Grease Lube Self Bidirectional CG 1RA26308BE $194,903 Copper Bar Sleeve Oil Lube Self Bidirectional CG 1RA27253BE $204,522 Copper Bar Sleeve Oil Lube Self Bidirectional CG 1RA27275BE $253,832 Copper Bar Sleeve Oil Lube Self Bidirectional CG 1RA27417BE $75,463 Alum. Diecast Ball Grease Lube Self Unidirectional CG 1RA25182BB $81,152 Alum. Diecast Ball Grease Lube Self Bidirectional CG 1RA26184BB $133,445 Copper Bar Ball Grease Lube Self Bidirectional CG 1RA26306BE $139,561 Copper Bar Ball Grease Lube Self Bidirectional CG 1RA26328BE $197,987 Copper Bar Sleeve Oil Lube Self Bidirectional CG 1RA27253BE $212,467 Copper Bar Sleeve Oil Lube Self Bidirectional CG 1RA27325BE10
22 ODP ENCLOSURE 60 Hertz 6600 Volt s & Part 1 Page $76,632 Alum. Diecast Ball Grease Lube Self Unidirectional CG 1RA25182BB $86,509 Alum. Diecast Ball Grease Lube Self Bidirectional CG 1RA26214BB $139,561 Copper Bar Ball Grease Lube Self Bidirectional CG 1RA26326BE $180,321 Copper Bar Sleeve Oil Lube Self Bidirectional CG 1RA27238BE $206,037 Copper Bar Sleeve Oil Lube Self Bidirectional CG 1RA27303BE $240,975 Copper Bar Sleeve Oil Lube Self Bidirectional CG 1RA27365BE $77,836 Alum. Diecast Ball Grease Lube Self Unidirectional CG 1RA25182BB $90,037 Alum. Diecast Ball Grease Lube Self Bidirectional CG 1RA26234BB $145,686 Copper Bar Ball Grease Lube Self Bidirectional CG 1RA26346BE $186,751 Copper Bar Sleeve Oil Lube Self Bidirectional CG 1RA27258BE $234,542 Copper Bar Sleeve Oil Lube Self Bidirectional CG 1RA27343BE $253,832 Copper Bar Sleeve Oil Lube Self Bidirectional CG 1RA27415BE $98,280 Alum. Diecast Ball Grease Lube Self Unidirectional CG 1RA26212BB $101,735 Alum. Diecast Ball Grease Lube Self Bidirectional CG 1RA26254BB $186,751 Copper Bar Sleeve Oil Lube Self Bidirectional CG 1RA27256BE $199,607 Copper Bar Sleeve Oil Lube Self Bidirectional CG 1RA27308BE $260,259 Copper Bar Sleeve Oil Lube Self Bidirectional CG 1RA27433BE $106,854 Alum. Diecast Ball Grease Lube Self Unidirectional CG 1RA26232BB $126,000 Alum. Diecast Ball Grease Lube Self Bidirectional CG 1RA26344BB $199,607 Copper Bar Sleeve Oil Lube Self Bidirectional CG 1RA27306BE $234,542 Copper Bar Sleeve Oil Lube Self Bidirectional CG 1RA27368BE $108,544 Alum. Diecast Ball Grease Lube Self Unidirectional CG 1RA26232BB $127,950 Alum. Diecast Ball Grease Lube Self Bidirectional CG 1RA26344BB $228,118 Copper Bar Sleeve Oil Lube Self Bidirectional CG 1RA27346BE $247,405 Copper Bar Sleeve Oil Lube Self Bidirectional CG 1RA27418BE $138,322 Alum. Diecast Sleeve Oil Lube Self Unidirectional CG 1RA26302BB $184,729 Copper Bar Sleeve Oil Lube Self Bidirectional CG 1RA27274BE $240,975 Copper Bar Sleeve Oil Lube Self Bidirectional CG 1RA27386BE $144,590 Alum. Diecast Sleeve Oil Lube Self Unidirectional CG 1RA26322BB $196,729 Copper Bar Sleeve Oil Lube Self Bidirectional CG 1RA27304BE $247,405 Copper Bar Sleeve Oil Lube Self Bidirectional CG 1RA27416BE $188,319 Copper Bar Sleeve Oil Lube Self Unidirectional CG 1RA27232BE $216,950 Copper Bar Sleeve Oil Lube Self Bidirectional CG 1RA27344BE $194,476 Copper Bar Sleeve Oil Lube Self Unidirectional CG 1RA27252BE $229,810 Copper Bar Sleeve Oil Lube Self Bidirectional CG 1RA27384BE $224,185 Copper Bar Sleeve Oil Lube Self Unidirectional CG 1RA27302BE $236,240 Copper Bar Sleeve Oil Lube Self Bidirectional CG 1RA27414BE $237,377 Copper Bar Sleeve Oil Lube Self Unidirectional CG 1RA27342BE10 Ratings highlighted in yellow are not suitable for use with an Adjustable Speed Drive application. Refer to factory for price and availability.
We will discuss common industrial applications with guides for the proper use of electric motors on these.
INTRODUCTION: Baldor Electric Company has prepared this Specifiers Guide to help you cover all the bases when you are specifying electric motors. It will cover in a generic way most of the subjects which
Motor Specifications. Nameplate
Motor Specifications Nameplate The nameplate of a motor provides important information necessary for selection and application. The following drawing illustrates the nameplate of a sample 30 horsepower
GE Energy. Motors Product Line
GE Energy Motors Product Line Expect More We ve manufactured motors for over 125 years. In 1879, GE founder, Thomas Edison constructed the first electric motor ever made for a 110 to 120 Volt line at Menlo
Wound Rotor Induction Motors 4-12 poles, up to 8000 kw, 11500 HP
Wound Rotor Induction Motors 4-12 poles, up to 8000 kw, 11500 HP ABB The Preferred Partner Egypt Cement Corporation, a major cement manufacturer, has chosen ABB wound rotor motors for all key applications
GE Power Conversion. Motors. Medium / High Voltage and High Speed 190 to 100,000 kw 250 to 134,000 HP
GE Power Conversion Motors Medium / High Voltage and High Speed 190 to 100,000 kw 250 to 134,000 HP 2 GE I Power Conversion GE has been setting the standard in manufacturing motors for over 125 years.
Solving VFD-sourced Bearing Current Problems in AC Motors.
Solving VFD-sourced Bearing Current Problems in AC Motors. The 2 main sources of motor shaft voltage are: 1. Asymmetric Motor construction The stator and rotor magnetic circuits within the motor itself
ELECTROPUTERE ROTATING ELECTRICAL MACHINES DIVISION
ELECTROPUTERE ROTATING ELECTRICAL MACHINES DIVISION SC ELECTROPUTERE SA SC ELECTROPUTERE SA 1. Vision, Mission, Values SC ELECTROPUTERE SA 2. LOCATION Craiova: Located in the South West of the country,
AC Motor Speed. n s = synchronous speed (in RPM), f = frequency (in Hz), and p = the number of poles
AC Induction Motors Simplest and most rugged electric motor Consists of wound stator and rotor assembly AC in the primary member (stator) induces current in the secondary member (rotor) Combined electromagnetic
A S Y N C H R O N O U S M O T O R S
ASYNCHRONOUS M O T O R S S E R I E S INDAR ASYNCHRONOUS MOTORS S E R I E S WHO WE ARE Indar Electric s trajectory is endorsed by the construction of thousands of motors for the different industrial sectors.
26 3213.13 Diesel Engine Driven Generators Page 1 of 6
Last Update: December 8, 2014 A. Description of System Consultant s Handbook Page 1 of 6 1. Provide a diesel engine driven electric generating unit, factory assembled, tested and certified to operate at
Generators TEM. for small hydroelectric power stations. Electric Machines
Generators for small hydroelectric power stations TEM Electric Machines Advanced solutions for the cleanest energy Reputable manufacturer of generators for small hydroelectric power stations TED Electric
Specifying a Variable Frequency Drive s
Specifying a Variable Frequency Drive s Put on by Bruce Reeves and Jeremy Gonzales Dykman Electrical Covering the Western US For all of your VFD and Soft Start and Motor Needs How To Specify a Variable
Rotary Phase Converters
FACTS from Ronk Electrical Industries, Inc. Bulletin 11981 Rotary Phase Converters ROTOVERTER Pat. No. 3,670,238 ROTO-CON Pat. No. 4,158,225 What are the ROTO-CON and ROTOVERTER power converters? The ROTO-CON
Pump Specifications 250 Series Submersible Sump / Effluent Pump 2 Solids handling
Pump Specifications 250 Series Submersible Sump / Effluent Pump 2 Solids handling 250_P1 R10/7/2015 Copyright 2015 Liberty Pumps Inc. All rights reserved. Specifications subject to change without notice.
AC Electric Motors best practice
If you want to learn more about best practice machinery maintenance, or world class mechanical equipment maintenance and installation practices, follow the link to our Online Store and see the Training
Motor Accessories. C-Face Kits for Field Conversion NEMA AC Motors
C-Face Kits for Field Conversion NEMA AC s Features: Complete kits with all hardware necessary for converting Baldor 56 though 449T frame ridgid base motors to C-Face mounting with base. For Baldor conversion,
What Do All Those Things on an AC Motor Nameplate Mean?
What Do All Those Things on an AC Motor Nameplate Mean? Introduction: Ever order a motor on power, speed, and enclosure? PO says maybe "5 hp, 1,800 rpm, TEFC." New-motor nameplate says "HP 5, RPM 1748,
Baldor Electric Position on DOE Small Motor Rule
Baldor Electric Position on DOE Small Motor Rule WP0035 WP0034 Page 1 of 6 US Integral DOE Small HP Motor Rule Rule Baldor Electric Position on DOE Small Motor Rule 10/28/14 On March 9, 2010 the US Department
Pump Specifications 405 Series Commercial Drain Pump (High-Temp) 2 Solids handling
Pump Specifications 405 Series Commercial Drain Pump (High-Temp) 2 Solids handling 405_P1 R1/27/2012 Copyright 2012 Liberty Pumps Inc. All rights reserved. Specifications subject to change without notice.
300 Series PA Pump and Cooler Assemblies
Type 300 Series PA Sizes 300 thru 370 (Page 1 of 9) 300 Series PA Pump and Cooler Assemblies Pump and Cooler Assemblies with Air/Oil Heat Exchanger When compact gear drives require assistance to dissipate
MTE SERIES RLW. World REACTORS USER MANUAL PART NO. INSTR 030 REL. 090930. 2009 MTE Corporation
MTE SERIES RLW World REACTORS USER MANUAL PART NO. INSTR 030 REL. 090930 2009 MTE Corporation IMPORTANT USER INFORMATION NOTICE MTE Series RLW reactors are components designed to improve the reliability
Model 362A AURORA. 340A/360A Series SINGLE STAGE END SUCTION PUMPS. www.aurorapump.com
Model 62A MODEL 41A MODEL 44A AURORA 40A/60A Series SINGLE STAGE END PUMPS www.aurorapump.com SINGLE STAGE END PUMPS AURORA 40A/60A Series Single Stage End Suction Pumps Capacities to 4500 G.P.M. (1022
1 Temperature Derating Guide
VLT HVAC Drive FC 02 Application Note Temperature Derating Guide Temperature Derating Guide.. Abstract This paper provides detailed data regarding the operation of the VLT HVAC Drive FC02 at varying ambient
SEWER CHEWER Wastewater / Sludge Grinder Submersible Gearmotor
INSTALLATION, OPERATION AND MAINTENANCE MANUAL For SEWER CHEWER Wastewater / Sludge Grinder Submersible Gearmotor Yeomans Chicago Corporation 3905 Enterprise Court P.O. Box 6620 Aurora, IL 60598-0620 Phone:
8146/5 Series Breaker Panelboards
8146/5 Series Breaker Panelboards DISTRIBUTION BREAKER PANELBOARDS FOR HAZARDOUS & CORROSIVE ENVIRONMENTS Breaker Panels Features: Wide variety of Flameproof branch circuit breakers for Zone 1 & Division
AC Replacement for DC Mill-Duty Motors
AC Replacement for DC Mill-Duty Motors This article is available online at www.aist.org for 30 days following publication. For many years, DC mill auxiliary motors for steel mill applications such as screwdowns,
Vertical Break Parallel (VBP) / Vertical Break Slant (VBS)
August, 2009 Vertical Break Parallel (VBP) / Vertical Break Slant (VBS) Type VBPA (Aluminum) / Type VBPC (Copper) Type VBSA (Aluminum) / Type VBSC (Copper) PASCOR Air Break Switch Technology PASCOR offers
TERMINAL MARKINGS AND CONNECTIONS PART WINDING START
TERMINAL MARKINGS AND CONNECTIONS PART WINDING START NEMA NOMENCLATURE 6 LEADS 7 7 3 9 8 Delta 3 9 8 Wye OPER. 9 MODE L L L3 OPEN 7 START 3 7,8,9 T T T3 T7 T8 T9 RUN,7,8 3,9 3 8 MOTOR LEADS 3 7 Double
General Information. ME-business can be accessed through: www. marathonelectric.com.
MARATHON ELECTRIC Since 1913, Marathon Electric s name has been recognized for engineering excellence, custom-designed products and an extensive product line of industrial quality motors. Available in
SECTION 4 ELECTRIC MOTORS UNIT 17: TYPES OF ELECTRIC MOTORS
SECTION 4 ELECTRIC MOTORS UNIT 17: TYPES OF ELECTRIC MOTORS UNIT OBJECTIVES After studying this unit, the reader should be able to Describe the different types of open single-phase motors used to drive
SINGLE PHASE MOTORS. INSTALLATION AND MAINTENANCE MANUAL March 21, 2006
SINGLE PHASE MOTORS INSTALLATION AND MAINTENANCE MANUAL March 21, 2006 Irvine, California (800) 474-0520 Indianapolis, Indiana (800) 866-7973 Hamilton, Ontario (800) 809-0330 e-mail: sales@sterlingelectric.com
Baldor Electric Company Premium Efficiency Motor Specification Open Drip-Proof Motors 1-500 HP Rev June 6, 2001
Table of Contents 1.0 Purpose 2.0 Scope Baldor Electric Company Premium Efficiency Motor Specification Open Drip-Proof Motors 1-500 HP Rev June 6, 2001 3.0 Motor Requirements 3.1 Applicable Codes and Regulations
ENGINEERING BULLETIN No. EB 039 Product: Cooling Towers, Closed Circuit Coolers & Evaporative Condensers Date: June 2003
For Distribution ENGINEERING BULLETIN No. EB 039 Product: Cooling Towers, Closed Circuit Coolers & Evaporative Condensers Date: June 2003 Purpose: Variable Frequency Drives The purpose of this Engineering
INSTALLATION AND MAINTENANCE INSTRUCTIONS FOR THREE PHASE INDUCTION MOTORS
INSTALLATION AND MAINTENANCE INSTRUCTIONS FOR THREE PHASE INDUCTION MOTORS Frames 143T - 449TZ 5100 North IH 35 Round Rock, Texas 78681 Phone: 800-451-8798 512-255-4141 Fax: 512-244-5512 RECEIVING 1. Check
Baldor Electric Company Premium Efficiency Motor Specification Totally Enclosed Fan Cooled Motor 1-250 HP Rev June 6, 2001
Table of Contents 1.0 Purpose 2.0 Scope Baldor Electric Company Premium Efficiency Motor Specification Totally Enclosed Fan Cooled Motor 1-250 HP Rev June 6, 2001 3.0 Motor Requirements 3.1 Applicable
Annex-A TECHNICAL SPECIFICATION
Annex-A TECHNICAL SPECIFICATION FOR SUPPLY, INSTALLATION, TESTING AND COMMISSIONING OF 0.4kV (2,000kVA) DIESEL GENERATOR 1 1.0 SCOPE This specification covers the requirements of design, manufacture, delivery
GE Industrial Systems. AC Motor Selection and Application Guide
apple GE Industrial Systems AC Motor Selection and Application Guide TABLE OF CONTENTS Voltage... 2 Frequency... 3 Phase... 4 Motor Output Rating... 4 Polyphase Motors... 4 Single-phase Motors... 4 Service
THREE-PHASE SQUIRREL CAGE ASYNCHRONOUS MOTORS AL SERIES
THREE-PHASE SQUIRREL CAGE ASYNCHRONOUS MOTORS AL SERIES IE2 FRAMES 80 355 0,75 315kW (1500rpm) FOR INVERTER DUTY Code Declaration of conformity The motors described in this catalogue satisfy the essential
AC METRIC (IEC) MOTORS THREE PHASE
AC METRIC MOTORS These high efficiency motors meet North American performance standards and EPACT energy efficiency mandates, and have.5 service factors. Typically used for replacement on machine tools,
PRODUCT GUIDE. SL Medium Voltage IEC Vacuum Contactors
PRODUCT GUIDE SL Medium Voltage IEC Vacuum Contactors Table of Contents 1 Overview Introduction....................................................2 Features........................................................2
32:(5#5$7,1* 4833#USP283#+] 4;33#USP293#+] 3ULPH 113 kva, 90 kw 124 kva, 99 kw 6WDQGE\ 114 kva, 91 kw 125 kva, 100 kw
![32:(5#5$7,1* 4833#USP283#+] 4;33#USP293#+] 3ULPH 113 kva, 90 kw 124 kva, 99 kw 6WDQGE\ 114 kva, 91 kw 125 kva, 100 kw](/thumbs/30/14614129.jpg "32:(5#5$7,1* 4833#USP283#+] 4;33#USP293#+] 3ULPH 113 kva, 90 kw 124 kva, 99 kw 6WDQGE\ 114 kva, 91 kw 125 kva, 100 kw")
,1'8675,$/#*(16(7 6HULHV#'9#448 32:(5#5$7,1* 4833#USP283#+] 4;33#USP293#+] 3ULPH 113 kva, 90 kw 124 kva, 99 kw 6WDQGE\ 114 kva, 91 kw 125 kva, 100 kw Generator set consisting of engine and alternator mounted
Introduction. Upon completion of Basics of AC Motors you should be able to:
Table of Contents Introduction...2 AC Motors...4 Force and Motion...6 AC Motor Construction... 12 Magnetism... 17 Electromagnetism... 19 Developing a Rotating Magnetic Field...24 Rotor Rotation...29 Motor
EVANS ENTErprises, Inc.
EVANS ENTErprises, Inc. Since 1954 THE LEADER IN ELECTRO-MECHANICAL SALES, SERVICE AND INTERGRATION Our Mission Our purpose at Evans Enterprises is to serve customers by providing increased value of product
SECTION 15732 AIR CONDITIONING UNIT
SECTION 15732 AIR CONDITIONING UNIT PART 1 GENERAL 1.01 SUMMARY A. Section includes: 1. Packaged, split system air conditioning unit No. 1. 1.02 REFERENCES A. Air-Conditioning, Heating, and Refrigeration
Explosion-Proof Electric Unit Heaters
Type FX4 FX4 Explosion-Proof Electric Air Heaters FX4 heaters are UL listed and/or CSA certified for use in hazardous locations. They are designed for dry indoor industrial applications such as oil refineries,
The Energy Independence and Security Act of 2007. The law s requirements for 1 to 500 horsepower AC motors Effective December 19, 2010
The Energy Independence and Security Act of 2007 The law s requirements for 1 to 500 horsepower AC motors Effective December 19, 2010 January 23, 2009 To Our Customers, Baldor Electric Company 5711 R.S.
ICQ Series - square centrifugal
product ICQ Square Centrifugal (TEFC) dimensions mm 280-710 poles & duty 4-8 / up to 4,500 L/s application High performance centrifugal fans for medium to high pressure ducted systems. ICQ Series The ICQ
Scraper Passage Indicator. Electrical Indicator. Features
IV Scraper Passage Indicator Bulletin No: 5110.001.03 Date: June 2008 Cross Indexing No: n/a Supersedes: 5110.001.02 (1/06) Flag Indicator Electrical Indicator Options Description TDW s IV Scraper Passage
MAC-120HE-01 Air-Cooled Chiller
MAC-120HE-01 Air-Cooled Chiller 10 Ton / 120,000 BTUH Air-Cooled Chiller 208/230-1-50/60 1 HVAC Guide Specifications Air-Cooled Liquid Chiller Nominal Size: 10 Tons Multiaqua Model Number: MAC-120HE-01
Baldor Electric ProSPEC MASTERFORMAT SPECIFICATION May 3, 2005. A. This specification covers integral horsepower squirrel cage AC induction motors.
SECTION 16221 - TEFC AC INDUCTION MOTORS PART 1 - GENERAL 1.1 SUMMARY A. This specification covers integral horsepower squirrel cage AC induction motors. B. This specification is intended to specify superior
Electric Rotary Actuator - On/Off or programmable control actuator
Electric Rotary Actuator - On/Off or programmable control actuator Direct mounting on quarter-turn valves Manual override standard Corrosion resistant Adjustable limit switches Multi-voltage version Type
Split System Heat Pump Product Data
Split System Heat Pump Product Silver 14 4A6H4 1 1 /2-5 Tons PUB. NO. 12-1175-07 Contents Features and Benefits 2 Model Nomenclature 3 General 4 Product Specifications 4 A-weighted Sound Power Level [db(a)]
HORIZONTAL PUMPING SYSTEM
HORIZONTAL PUMPING SYSTEM BORETS U.S. INC. PERFORMANCE TECHNOLOGY INNOVATION Horizontal Pumping System What is HPS? HPS classification, Pumps, Stages, Impellers, Curves/Performance, Components Why use
W50 Three-Phase Electric Motor
Motors Automation Energy Transmission & Distribution Coatings W50 Three-Phase Electric Motor Technical Catalogue IEC Market W50 - The New Generation of WEG Motors for Heavy Duty Applications The W50 motor
Split System Cooling Product Data
Split System Cooling Product Data XR17 4TTR7 2, 3, 4 & 5 Tons PUB. NO. 22-1884-01 Features and Benefits CLIMATUFF 2-stage scroll compressor Efficiency up to 18.0 SEER All Aluminum SPINE FIN coil DURATUFF
Electronic, Digital and Mechanical Vibration Switches
PT500 Electro-Mechanical Vibration Switch Introduction The PT500 is an economical solution that provides basic vibration protection for rotating reciprocating machines. The PT500 uses an inertia sensitive
Basic Nameplate Information
Basic Nameplate Information General Information: Most equipment nameplates will have some common items of information. Many of these are self explanatory, and include: Manufacturer Manufacturerʼs address
Horizontal Jet Pumps 1/3-1-1/2 HP
Horizontal Jet s 1/3-1-1/2 FW01 0909 Supersedes 0409 The CPJ, CPH and EK models feature the famous Flint and Walling Service Plus motor, available in either NEMA J or Uni-frame flange construction. The
Why Baldor? Table of Contents. www.baldor.com
Pump Motors Why Baldor? Industry s shortest lead times/flexible manufacturing. Baldor has the industry s shortest lead times on custom motors just ten working days. Our unique LEAN FLEX FLOW manufacturing
The Ultimate Truck Stock Motor
The Ultimate Truck Stock Motor What is a Rescue Motor? Universal Replacement Motor for Condenser Fan and Direct Drive Blower Applications Multi-Horsepower PSC Motors Flexible Mounting Options Permanent
ELECTRICAL ENGINEERING Vol. III - Induction Motor and Self-Excited Induction Generator - Tze-Fun Chan
INDUCTION MOTOR AND SELFEXCITED INDUCTION GENERATOR TzeFun Chan The Hong Kong Polytechnic University, Hung Hom, Kowloon, Hong Kong, China Keywords: threephase induction motor, singlephase induction motor,
Fundamentals of Inverter Fed Motors
Fundamentals of Inverter Fed Motors Technical Manual 10/02 MN780 Contents Page The Growing Use Of Inverters.................................................................. 1 How Inverters Affect Motors....................................................................
Split System Cooling Product Data
Split System Cooling Product XL16i 1½ 5 Tons PUB. NO. 22-1890-01 Features and Benefits Climatuff compressor Efficiency up to 16.0 SEER and 9.0 HSPF All aluminum Spine Fin coil WeatherGuard fasteners Quick-Sess
INDOOR COILS. RCFN- featuring Industry Standard R-410A Refrigerant CASED/UNCASED COILS FOR GAS AND OIL FURNACES
FORM NO. C11-213 REV. 4 Supersedes Form No. C11-213 Rev. 3 INDOOR COILS RCFN- featuring Industry Standard R-410A Refrigerant CASED/UNCASED COILS FOR GAS AND OIL FURNACES AIRFLOW CAPACITIES 600-1,900 CFM
XV80 UPFLOW/HORIZONTAL 2-STAGE, VARIABLE SPEED GAS-FIRED FURNACE
UPF/HORIZONTAL 2-, VARIABLE SPEED GAS-FIRED FURNACE XV80 MODELS TUD2B060A9V3VB, TUD2B080A9V3VB TUD2C080A9V4VB, TUD2C080B9V4VB TUD2B00A9V3VB, TUD2C00A9V5VB TUD2C00B9V5VB, TUD2DA9V5VB TUD2DB9V5VB, TUD2DA9V5VB
FAIRBANKS NIJHUIS FIRE PUMPS. www.fairbanksnijhuis.com
FAIRBANKS NIJHUIS FIRE PUMPS www.fairbanksnijhuis.com FAIRBANKS NIJHUIS Long established as a leading fire pump manufacturer, Fairbanks Nijhuis offers a broad range of horizontal and vertical split case,
N E R / E R T H R E E P H A S E ELECTRIC C H A I N H O I S T S
N E R / E R T H R E E P H A S E ELECTRIC C H A I N H O I S T S W o r k i n g H a r d e r F o r Yo u In 1876, Edwin Harrington dramatically improved the self-sustaining hoist by introducing the worm-gear
SECTION 26 29 23 VARIABLE FREQUENCY DRIVES
SECTION 26 29 23 VARIABLE FREQUENCY DRIVES PART 1 GENERAL 1.01 SCOPE A. Furnish and install individual freestanding variable frequency AC drives (VFD) as shown on the Drawings and specified herein. 1.02
COOLING TECHNOLOGY INSTITUTE
PAPER NO: CATEGORY: TP09-18 FANS COOLING TECHNOLOGY INSTITUTE RECENT DEVELOPMENTS IN MOTOR TECHNOLOGY ALLOW DIRECT DRIVE OF LOW SPEED COOLING TOWER FANS ROBBIE MCELVEEN BILL MARTIN RYAN SMITH BALDOR ELECTRIC
OHV / OHVL Type OH3 Vertical Inline Pumps ISO 13709 (API 610)
OHV / OHVL Type OH3 Vertical Inline Pumps ISO 13709 (API 610) The Heart of Your Process OHV / OHVL Type OH3 Vertical Inline Pumps ISO 13709 (API 610) OHV OHVL OHV/OHVL Sales Presentation slide
MEDIUM AND HIGH VOLTAGE CAPACITORS, CAPACITOR BANKS AND SYSTEMS
MEDIUM AND HIGH VOLTAGE CAPACITORS, CAPACITOR BANKS AND SYSTEMS Meher Capacitors offers reliable and innovative products and solutions in the fields of Reactive Power Compensation, Power Quality and Energy
SECTION 23 81 03 - PACKAGED ROOFTOP AIR CONDITIONING UNITS NON-CUSTOM
SECTION 23 81 03 - PACKAGED ROOFTOP AIR CONDITIONING UNITS NON-CUSTOM PART 1 - GENERAL 1.1 SUMMARY A. Section Includes: 1. Packaged rooftop air conditioning unit (5 tons and smaller). 2. Roof curb. 1.2
INDOOR COILS. RCFL- featuring Industry Standard R-410A Refrigerant CASED/UNCASED COILS FOR GAS AND OIL FURNACES
FORM NO. C11-211 REV. 7 Supersedes Form No. C11-211 Rev. 6 INDOOR COILS RCFL- featuring Industry Standard R-410A Refrigerant CASED/UNCASED COILS FOR GAS AND OIL FURNACES AIRFLOW CAPACITIES 600-1,900 CFM
Siemens AG 2009. Spindle solutions. Spindle motors and motor spindles for every requirement. Brochure October 2009. Motors. Answers for industry.
Spindle solutions Spindle motors and motor spindles for every requirement Brochure October 2009 Motors Answers for industry. The right spindle solution for any task The function, performance and accuracy
ANCILLARY EQUIPMENT AND ELECTRICAL EQUIPMENT Power Supply Systems and Electrical Equipment for Desalination Plants - Y.M. Hamud and A.H.
POWER SUPPLY SYSTEMS AND ELECTRICAL EQUIPMENT FOR DESALINATION PLANTS Y.M. Hamud and A.H. Anwar Abu Dhabi Water and Electricity Authority, Abu Dhabi, UAE Keywords : Electrical System, Network for Desalination,
INDOOR COILS. RCFM- featuring Earth-Friendly R-410A Refrigerant CASED/UNCASED COILS FOR GAS AND OIL FURNACES
FORM NO. C11-212 REV. 1 Supersedes Form No. C11-212 INDOOR COILS RCFM- featuring Earth-Friendly R-410A Refrigerant earth friendly refrigerant CASED/UNCASED COILS FOR GAS AND OIL FURNACES AIRFLOW CAPACITIES
Product Brochure. Certified Mining Motors
Product Brochure Certified Mining Motors Profile Baldor Electric Company (a member of the ABB group) is a world leader in motors for the mining industry. In the continuous (24/7) operation of underground
Documenting Results to Validate Energy Savings Projects: Case Study of Direct Drive Cooling Tower Installations: Before and After
Documenting Results to Validate Energy Savings Projects: Case Study of Direct Drive Cooling Tower Installations: Before and After Roman Wajda, Baldor Electric Company ABSTRACT Documenting the actual energy
WE-350 Series ¼ Turn Electric Actuator
WE-350 Series ¼ Turn Electric Actuator Operation and Installation Manual Pg 1 (Rev. 020113) Table of Contents 1.0 General 1.1 Pre-Installation Inspection 1.2 Storage 1.3 Features & General Information
PRE-ASSEMBLED REMOTE REFRIGERATION SYSTEMS
NOR-LAKE, INCORPORATED 727 Second Street P.O. Box 248 Hudson, Wisconsin 54016 800-955-5253 715-386-2323 866-961-5253 Parts 800-388-5253 Service 715-386-4291 FAX www.norlake.com Split-Pak Pre-Assembled
Installation, Operation and Maintenance Instructions
Installation, Operation and Maintenance Instructions for AC Induction Motors 56-6800 Frames (NEMA) 63 280 Frames (IEC) MARATHON ELECTRIC Contact Motor Customer Service at: Phone: (75) 675-33 www.marathonelectric.com
What Is Regeneration?
What Is Regeneration? Braking / Regeneration Manual Regeneration Overview Revision 1.0 When the rotor of an induction motor turns slower than the speed set by the applied frequency, the motor is transforming
APPLICATION GUIDELINE FOR ELECTRIC MOTOR DRIVE EQUIPMENT FOR NATURAL GAS COMPRESSORS
APPLICATION GUIDELINE FOR ELECTRIC MOTOR DRIVE EQUIPMENT FOR NATURAL GAS COMPRESSORS RELEASE VERSION 4.0 May 2009 Gas Machinery Research Council Southwest Research Institute APPLICATION GUIDELINE FOR ELECTRIC
Shaft grounding. Carbon brushes for shaft grounding are used in turbo-generators, in distinct AC- and DC motors and as a special application in Ships.
"Modern AC-Motors don't need carbon brushes and are maintenance free " Until some years ago this thrilling statement could be heard from motor OEM's. Nowadays SCHUNK supplies carbon brushes and brush holders
SIRIUX. SINGLE AND DOUBLE HIGH EFFICIENCY CIRCULATORS Heating Air-conditioning OPERATING LIMITS APPLICATIONS. 28 m 3 /h* Heads up to: Flows up to:
OPERATING LIMITS Flows up to: m /h* Heads up to: m C Max operating pressure: bars Temperature range: - à + C Max ambient temperature: + C ND of orifices: à * m /h: parallel operation SIRIUX SINGLE AND
Product Description Full Voltage Starting Electric Fire Pump Controllers FTA1000
Product Description Full Voltage Starting Electric Fire Pump Controllers FTA1000 Description Firetrol FTA1000 Full Voltage Fire Pump Controllers are intended for use with electric motor driven fire pumps
C Standard AC Motors
C Standard AC Standard AC C-1 Overview, Product Series... C-2 Constant... C-9 C-21 C-113 Reversible C-147 Overview, Product Series Constant Reversible Electromagnetic Brake C-155 Electromagnetic Brake
Recirculating Roof Fans Models ESRMD, ESRMDF and ERD
Recirculating Roof Fans Models ESRMD, ESRMDF and ERD Four-Way Fan Exhaust Supply Mix Recirculate BUILDING VALUE IN AIR. October 2005 Recirculating Roof Fans Exhaust/Supply/Recirculation/Mix Model ESRMD
2a. IEM Indoor Metal Clad Medium Voltage Switchgear 15KV 16346-1. 2a. Section 16346 INDOOR METAL CLAD MEDIUM VOLTAGE SWTICHGEAR (Std.
2a. IEM Indoor Metal Clad Medium Voltage Switchgear 15KV 16346-1 2a. Section 16346 INDOOR METAL CLAD MEDIUM VOLTAGE SWTICHGEAR (Std. Relays) Part 1 General 1.1 CONDITIONS AND REQUIREMENTS: A. Refer to
Data Sheet. AC Industrial Electric Motors
Data Pack B Issued ovember 2005 1502325812 Data Sheet AC Industrial Electric Motors Standards organisations The RS-ABB range of ac induction motors is produced to common European standards, these being
Pump Skid Fabrication for Magnetic Coupling. Rick Soltis Chief Mechanic City of Bedford
Pump Skid Fabrication for Magnetic Coupling Rick Soltis Chief Mechanic City of Bedford Contents Magnetic Couplings What They Are, How They Work, Where They re Used Fabrication and Manufacturing of Pump
Commercial Refrigeration Temperature and Defrost Controls
Commercial Refrigeration Temperature and Defrost Controls UNI-LINE PRODUCT KNOWLEDGE 2010 Invensys. All Rights Reserved. The names, logos, and taglines identifying the products and services of Invensys
INDOOR COILS. RCFA- featuring R-22 Refrigerant RCFL- featuring Earth-Friendly R-410A Refrigerant CASED/UNCASED COILS FOR GAS AND OIL FURNACES
FORM NO. C11-211 REV. 3 Supersedes Form No. C11-211 Rev. 2 INDOOR COILS RCFA- featuring R-22 Refrigerant RCFL- featuring Earth-Friendly R-410A Refrigerant earth friendly refrigerant CASED/UNCASED COILS
Filterfans. Air Flow data: PF 1000 PF 2000 PF 2500 PF 3000 PF 5000 PF 6000 PF 7000
Filterfans Patented Click & Fit design provides a hardware free installation! Poured-in foam gasket allows for quick NEMA 12 sealing against the enclosure (except PF 1000) Plastic made from strong (ABS-FR),
Frequently Asked Questions Generators
Frequently Asked Questions Generators Fuel Related How much fuel do the generators use during normal operation? At exercise? The generator fuel consumption is given in each of the product knowledge books
Cased/Uncased Coils For Gas And Oil Furnaces
Indoor Coils Cased/Uncased Coils For Gas And Oil Furnaces RCFL- Series featuring Industry Standard R-410A Refrigerant Airflow Capacity 600-1,900 CFM [283-897 L/s] Rheem Indoor Coils are designed for use
NEMA Application Guide for AC Adjustable Speed Drive Systems
Copyright 2001 IEEE. Reprinted from IEEE/PCIC 2001 Conference Record. This material is posted here with permission of the IEEE. Such permission of the IEEE does not in any way imply IEEE endorsement of
I hope you find them useful and I would appreciate any comments or thoughts you might have for future improvements, corrections or topics.
COWERN PAPERS Baldor Electric Company 5711 R.S. Boreham Jr. Street Fort Smith, AR 72901 Phone (479) 646-4711 Fax (479) 648-5792 www.baldor.com Enclosed you will find a set of papers that I have written
SECTION 23 00 01 HEATING, VENTILATION AND AIR CONDITIONING EQUIPMENT
SECTION 23 00 01 HEATING, VENTILATION AND AIR CONDITIONING EQUIPMENT PART 1 - GENERAL 1.1 DESCRIPTION A. The Work specified in this Section consists of designing, furnishing and installing factory-assembled
MEMBRANE VACUUM MINI PUMPS
MEMBRANE VACUUM MINI PUMPS The mini pumps described in this page are membrane-type. They can be used both as vacuum pumps and compressors. In the latter version they can supply compressed air 100% oil-free