Real Stone Cladding. Flex Stone Translucent Stone Nano Stone Glass Stone. Thin Stone Veneer Catalogue

Transcription

1 Flex Stone Translucent Stone Nano Stone Glass Stone Thin Stone Veneer Catalogue 1

2 FLEX STONE Innovation in interior design - Innovative product for interior and exterior use - Natural stone for flat or curved surface - Thickness: mm - Weight: kg per sqm - Sizes: 1220 mm x 610 mm (0.74 sqm) and 2440 mm x 1220 mm (2.98 sqm) - 18 colours in standard size and 13 colours in large size Prices for Flex Stone sheets start from 33 + VAT per sheet ( per sqm) 2

3 FLEX STONE COLOURS GOLD GREEN JEERA GREEN GREY BEAUTY INDIAN AUTUMN CALIFORNIA GOLD GOLDEN COPPER SHINE AUTUMN RUSTIC 3

4 FLEX STONE COLOURS SANJAYNI WHITE STEEL GREY SILVER SHINE SOUTH GREY MULTICOLOUR SILVER GREY OCEAN LINE BLACK 4

5 FLEX STONE COLOURS TAN WHITE TAN BROWN TRANSLUCENT STONE COLOURS TAN WHITE TAN BROWN INDIAN AUTUMN AUTUMN RUSTIC 5

6 NANO STONE COLOURS Autumn Rustic 2. California Gold 3. Gold Green 4. Indian Autumn 5. Line Black 6. Multicolour 7. Sanjayni White 8. South Grey 9. Tan Brown 10. Tan White 10 6

7 GLASS STONE All the above, both standard and translucent, can be cast in glass sheet to form a unique glass panel. Flex Stone Glass Natural uses standard sheets and Flex Stone Glass LED uses translucent thin stone veneers. - Thickness: 6-19 mm - Size: 600 x 300 mm, 600 x 600 mm, 1200 x 600 mm, 1200 x 2400 mm - 18 colours in Natural range and 4 colours in LED range Prices for Flex Stone Glass start from 70 + VAT per panel 7

8 residential and commercial new build or renovation 8

9 any construction method 9

10 WHY USE THIN STONE VENEER? Thin stone veneer is a natural slate with its bottom side made of polyester resin enforced with fiberglass. It is a flexible stone veneer which may be applied onto concrete, ceramics, wood, metal, plywood, plastic, tiles, walls, paint, MDF board, doors and furniture. The stone veneer has been tested under various conditions. It is an excellent substitute for thick and heavy natural stone slabs whenever they cannot be used for practical or economical reasons. It is not recommended to use the stone veneer on floors in commercial spaces or on worktops. simple Can be cut with tin snips or small angle grinder. Usually fixed using grab adhesive. Sheets can be butt jointed or finished with mortar joint. versatile Suitable for both internal and external applications, flat and curved surfaces including pillars. So lightweight that there are no structural implications. flexible it is natural stone that can be fitted to any surface, flat or curved such as pillars. It is very flexible and easily bends as on average it is 2 mm thick only. natural Each sheet is unique with its own texture and pattern,displaying all the qualities of natural stone. economical Much quicker and easier to fit than any other kind of stone, whether panel or walling stone, meaning lower fitting and labour costs. choice 18 standard colours 4 translucent colours 10 nano stone colours 22 glass stone colours 10

11 FITTING GUIDELINES CUTTING Even the most basic tiling equipment is sufficient for installing the stone veneer. Long metal-cutting shears are recommended for cutting stone-veneer, although power-tools, such as angle grinder, may be used as well. APPLICATION Applying and locating sheets of stone veneer is very similar to installing natural stone slabs. Stone veneer is a natural material and each sheet is different. Before actual fixing, it is recommended to determine exact composition of sheets to match varying patterns and hues of colour: place each sheet in its destined place and mark their order before final installation. SEALING Initial sealing of stone veneer before installation is recommended. Sealer protects slate against staining from adhesive or grout used during installation. Sealers for slate, other natural stone or wood can be used. Testing sealer to confirm its aesthetic effect on the stone veneer is advisable. FIXING Choosing the right adhesive is of paramount importance; every adhesive should be tested before use. Consider temperature and moisture levels of the place where the veneer is to be installed. When installing outdoors, take the thermal expansion into account. Test primer before application beforehand as well. RECOMMENDED ADHESIVES Hybrid polymer based adhesive - for use on any surface, does not require constant pressure Polyurethane adhesive - for furniture exposed to moisture Contact adhesive - for elements of furniture Epoxy adhesive Dispersion adhesive for ceramics (highly absorbent substrates) APPLICATION - PRESSURE Method of application is similiar to hanging wallpaper. Spread adhesive using notched trowel, any irregularities of substrate should be levelled-out before application of stone veneer Start by applying one edge and gradually spread the sheet. The best way to apply uniform pressure to the sheet is by using a roller; it will enable removing any air bubbles from between the sheet and the substrate. GROUTING Stone veneer can also be used to create tiling effect and space for joints between sheets can be left. Sheets of stone veneer can also be applied without grout joints (not recommended outdoors). Use epoxy grouts and flexible acrylic grouts. 11

12 GENERAL & SAFETY ADVICE SUBSTRATE In some indoor and most outdoor cases the issue of substrate expansion and contraction should be addressed. Use of flexible adhesives is recommended in those cases. Concrete and brick substrates should be allowed to set for at least 28 days before application of stone veneer. Hydrostatic value of pressure and vapour permeability should not exceed 1,36 kg per 92,9 m2 in 24 hours. In lime chloride test, moisture retention should stay below 2,5% CONTENTS AND VARIATIONS Thin stone veneer is a natural material made of slate which has back reinforcement of fiberglass and polyester resin. Stone veneer s surface is natural stone. Variations in colour and texture are its feature which confirm it is a natural material. Sheets are made of natural stone and each one is different in colour and texture. UV RADIATION AND TEMPERATURE Natural stone surface of stone veneer, as most stone elements, acts as filtre of UV radiation and stays sunlight resistant for years. After fixing to surface it reduces thermal expansion and contraction of most construction materials. Stone veneer protects against cracks due to low and high temperatures. Temperature and humidity of the place where stone veneer is used should always be considered. In cases of outdoor use, thermal expansion should be taken into account. SAFETY NOTES Due to the backing of stone veneer being made of fibreglass, adequate safety meaures should be observed. Always use gloves, safety glasses and a dust mask. NIOSH/MSHA approved respirator is recommended. When using a saw, always protect skin and eyes against fibreglass dust. When cutting or grinding stone veneer use tools with adequate filter and dust absorber. Stone veneer complies with EU fire and heavy metal regulations. EN 15102:2007+A1:

13 catalogue T/F: E: W: trading name of Specify Ltd registered address 56 South Street Bo ness EH51 9HA 13