RClamp0503F RailClamp TVS Array for USB OTG Interfaces

Size: px
Start display at page:

Download "RClamp0503F RailClamp TVS Array for USB OTG Interfaces"

Transcription

1 - RailClamp Description RailClamp TVS arrays are low capacitance SD protection devices designed to protect high speed data interfaces.. This series has been specifically designed to protect sensitive components which are connected to data and transmission lines from overvoltage caused by SD (electrostatic discharge), CD (Cable Discharge vents), and FT (electrical fast transients). The unique design incorporates surge rated, low capacitance steering diodes and a TVS diode in a single package. During transient conditions, the steering diodes direct the transient to either the positive side of the power supply line or to ground. The internal TVS diode prevents over-voltage on the power line, protecting any downstream components. The low capacitance array configuration allows the user to protect three high-speed data or transmission lines. The low inductance construction minimizes voltage overshoot during high current surges. This device is optimized for SD protection of USB OTG and SIM interfaces. They may be used to meet the SD iunity requirements of IC 6-4-2, Level 4 (±kv air, ±8kV contact discharge). RClamp3F RailClamp TVS Array for USB OTG Interfaces Features Transient protection for high-speed data lines to IC (SD) ±2kV (air), ±2kV (contact) IC (FT) 4A (/ns) Array of surge rated diodes with internal TVS Diode Small package saves board space Protects three I/O lines & power line Low capacitance (<3pF) for high-speed interfaces Low clamping voltage Low operating voltage:.v Solid-state silicon-avalanche technology Mechanical Characteristics IAJ SC-7 L package Molding compound flaability rating: UL 94V- Lead Finish: Matte Tin Pb-Free, Halogen Free, RoHS/W Compliant Marking : F3 Packaging : Tape and Reel Applications USB OTG interfaces SIM Ports Video Graphics Cards Personal Digital Assistants (PDAs) Monitors and Flat Panel Displays Portable lectronics Microcontroller Input Protection Schematic Schematic & PIN Configuration SC-7 L (Top View) Revision 4/2/24

2 Absolute Maximum Rating Rating Symbol Value Units Peak Pulse Power (tp = 8/2μs) M aximum Peak Pulse Current ( tp = 8/2μs) P pk Watts I pp 6 Amps SD per IC (Air) SD per IC (Contact) V SD +/- 2 +/- 2 kv Operating Temperature T J - to +2 C Storage Temperature T STG to + - C lectrical Characteristics (T=2 o C) Parameter Symbol Conditions Minimum Typical Maximum Units Reverse Stand-Off Voltage V WM R in to 2 P V Reverse Breakdown Voltage V R B I t = ma Pin to 2 6 V Reverse Leakage Current I R V RWM = V, T=2 C Pin to 2 Clamping Voltage V C I PP = A, tp = 8/2μs Pin, 3, or 4 to Pin 2 Clamping Voltage V C I PP = 6A, tp = 8/2μs Pin, 3, or 4 to Pin 2 Junction Capacitance C j V R = V, f = MHz Pin, 3, or 4 to Pin 2 Notes )SD gun return path connected to SD ground reference plane. V R = V, f = MHz Between any two I/O pins (, 3, 4) 3 μa V 2 V 3 pf. pf 24 Semtech Corporation 2

3 Typical Characteristics Non-Repetitive Peak Pulse Power vs. Pulse Time Clamping Voltage vs. Peak Pulse Current (tp=8/2us) Peak Pulse Power - P PP (kw). T A = 2 O C Clamping Voltage - V C (V) 2 2 Waveform Parameters: tr = 8µs td = 2µs Pin, 3, or 4,to pin 2 Pin to pin 2.. Pulse Duration - tp (µs) Junction Capacitance vs. Reverse Voltage (Pin, 3, or 4 to GND - Normalized to V) DR Peak Pulse Current - I PP (A) TLP Characteristic (Pin, 3, or 4 to GND) Normalized Capacitance 2.. f = MHz Current (A) Transmission Line Pulse Test (TLP) Settings: t p = ns, t r =.2ns, I TLP and V TLP averaging window: t = 7ns to t 2 = 9ns Reverse Voltage - V R (V) Voltage (V) SD Clamping (+8kV Contact per IC 6-4-2) (Pin, 3, or 4 to GND) SD Clamping (-8kV Contact per IC 6-4-2) (Pin, 3, or 4 to GND) 2 Measured with Ohm scope input impedance, 2GHz bandwidth. Corrected for Ohm, 4dB attenuator. SD gun return path connected to SD ground plane - Voltage (V) Voltage (V) Measured with Ohm scope input impedance, 2GHz bandwidth. Corrected for Ohm, 4dB attenuator. SD gun return path connected to SD ground l Time (ns) Time (ns) 24 Semtech Corporation 3

4 Typical Characteristics Insertion Loss S2 S2 (db) (Pin, 3, or 4 to GND) -6 Frequency (MHz) S2 (db) Insertion Loss S2 (Between any two I/O pins -, 3, 4) -.8 Frequency (MHz) 24 Semtech Corporation 4

5 Applications Information Device Connection Options for Protection of Three High-Speed Data Lines Data Line and Power Supply Protection Using Vcc as reference This device is designed to protect three data lines from transient over-voltages by clamping them to a fixed reference. When the voltage on the protected line exceeds the reference voltage (plus diode V F ) the steering diodes are forward biased, conducting the transient current away from the sensitive circuitry. Data lines are connected at pins, 3, and 4. The negative reference is connected at pin 2. This pin should be connected directly to a ground plane on the board for best results. The path length is kept as short as possible to minimize parasitic inductance. Connect pin directly to the positive supply rail (V CC ). In this configuration the data lines are referenced to the supply voltage. The internal TVS diode prevents over-voltage on the supply rail. Matte Tin Lead Finish Matte tin has become the industry standard lead-free replacement for SnPb lead finishes. A matte tin finish is composed of % tin solder with large grains. Since the solder volume on the leads is small compared to the solder paste volume that is placed on the land pattern of the PCB, the reflow profile will be determined by the requirements of the solder paste. Therefore, these devices are compatible with both lead-free and SnPb assembly techniques. In addition, unlike other lead-free compositions, matte tin does not have any added alloys that can cause degradation of the solder joint. 24 Semtech Corporation

6 Outline Drawing - SC-7 L /2 ccc C 2X N/2 TIPS A N 2 B D e e D DIMNSIONS INCHS MILLIMTRS DIM MIN NOM MAX MIN NOM MAX A A A b c D e.83 BSC.26 BSC 2. BSC.6 BSC e..3 BSC L L (.7) (.42) N aaa.4. bbb.4. ccc.2.3 aaa C A2 A SATING PLAN C A bxn bbb C A-B D GAG PLAN H c SID VIW S DTAIL A. DTAIL A L (L) NOTS:. CONTROLLING DIMNSIONS AR IN MILLIMTRS (ANGLS IN DGRS). 2. DATUMS -A- AND -B- TO B DTRMIND AT DATUM PLAN -H- 3. DIMNSIONS "" AND "D" DO NOT INCLUD MOLD FLASH, PROTRUSIONS OR GAT BURRS. 4. RFRNC JDC STD MO-23, VARIATION AA. Land Pattern - SC-7 L C X Y G Z DIM C G P X Y Z DIMNSIONS INCHS MILLIMTRS (.73) (.8) P NOTS:. THIS LAND PATTRN IS FOR RFRNC PURPOSS ONLY. CONSULT YOUR MANUFACTURING GROUP TO NSUR YOUR COMPANY'S MANUFACTURING GUIDLINS AR MT. 24 Semtech Corporation 6

7 Marking Code F3 Ordering Information Part Number RClamp3F.TCT Lead Finis h Qty per Reel Reel Size Matte Tin 3, 7 Inch RailClamp and RClamp are trademarks of Semtech Corporation. Carrier Tape Specification F3 F3 F3 F3 F3 F3 F3 F3 Device Orientation in Tape Tape Width B, (Max) D D (MIN) F K (MAX) P P P 2 T(MAX) W (.6) ( ). (.39).7±. (.69±.4) 3.±. (.38±.2) 2.4 (.94) 4.±. (.7±.- 4) 4.±. (.7±.- 4) 2.±. (.79±.2).4 (.6) 8.3 (.32±.2) Contact Information Semtech Corporation Protection Products Division 2 Flynn Rd., Camarillo, CA 932 Phone: (8)498-2 FAX (8) Semtech Corporation 7

RClamp0502BA. Ultra-Low Capacitance TVS for ESD and CDE Protection. PROTECTION PRODUCTS - RailClamp Description. Features. Mechanical Characteristics

RClamp0502BA. Ultra-Low Capacitance TVS for ESD and CDE Protection. PROTECTION PRODUCTS - RailClamp Description. Features. Mechanical Characteristics - RailClamp Description RailClamp TS diodes are specifically designed to protect sensitive components which are connected to high-speed data and transmission lines from overvoltage caused by ESD (electrostatic

More information

RClamp0504P RailClamp Low Capacitance TVS Array

RClamp0504P RailClamp Low Capacitance TVS Array - RailClamp Description RailClamps are low capacitance TVS arrays designed to protect high speed data interfaces. This series has been specifically designed to protect sensitive components which are connected

More information

SDC15. TVS Diode Array for ESD Protection of 12V Data and Power Lines. PROTECTION PRODUCTS Description. Features. Mechanical Characteristics

SDC15. TVS Diode Array for ESD Protection of 12V Data and Power Lines. PROTECTION PRODUCTS Description. Features. Mechanical Characteristics Description The SDC15 transient voltage suppressor (TVS) is designed to protect components which are connected to data and transmission lines from voltage surges caused by electrostatic discharge (ESD),

More information

LC03-6. Low Capacitance TVS for High-Speed Data Interfaces. Features. Description. Mechanical Characteristics. Applications

LC03-6. Low Capacitance TVS for High-Speed Data Interfaces. Features. Description. Mechanical Characteristics. Applications Description The LC0- transient voltage suppressor is designed to protect components which are connected to high speed telecommunication lines from voltage surges caused by lightning, electrostatic discharge

More information

RClamp0514M RailClamp Low Capacitance TVS Diode Array PRELIMINARY Features

RClamp0514M RailClamp Low Capacitance TVS Diode Array PRELIMINARY Features RailClamp Description RailClamps are ultra low capacitance TVS arrays designed to protect high speed data interfaces. This series has been specifically designed to protect sensitive components which are

More information

RClamp0821P. Ultra-Low Capacitance 1-Line ESD protection. PROTECTION PRODUCTS - RailClamp Description. Features. Mechanical Characteristics

RClamp0821P. Ultra-Low Capacitance 1-Line ESD protection. PROTECTION PRODUCTS - RailClamp Description. Features. Mechanical Characteristics - RailClamp Description The RailClamp family is a series of ultra low capacitance Transient oltage Suppressors (TS) designed to protect high speed data interfaces. This series has been specifically designed

More information

uclamp3301h Low Voltage μclamp TM for ESD and CDE Protection PRELIMINARY Features

uclamp3301h Low Voltage μclamp TM for ESD and CDE Protection PRELIMINARY Features PROTECTION PRODUCTS -MicroClamp Description The μclamp series of Transient Suppressors (TVS) are designed to replace multilayer varistors (MLVs) in portable applications such as cell phones, notebook computers,

More information

SMF05C. TVS Diode Array For ESD and Latch-Up Protection PRELIMINARY. PROTECTION PRODUCTS Description. Features. Mechanical Characteristics

SMF05C. TVS Diode Array For ESD and Latch-Up Protection PRELIMINARY. PROTECTION PRODUCTS Description. Features. Mechanical Characteristics Description The SMF series TVS arrays are designed to protect sensitive electronics from damage or latchup due to ESD and other voltageinduced transient events. They are designed for use in applications

More information

uclamp0541z Ultra Small μclamp 1-Line ESD Protection

uclamp0541z Ultra Small μclamp 1-Line ESD Protection - Z-Pak TM Description μclamp TVS diodes are designed to protect sensitive electronics from damage or latch-up due to ESD. It is designed to replace 2 size multilayer varistors (MLVs) in portable applications

More information

STF201-22 & STF201-30

STF201-22 & STF201-30 Description The STF201 is a combination EMI filter and line termination device with integrated TVS diodes for use on downstream USB ports. It is constructed using a proprietary technology that allows passive

More information

STF203-15 THRU STF203-33

STF203-15 THRU STF203-33 Description The STF03 is a combination EMI filter and line termination device with integrated diodes for use on upstream USB ports. It is constructed using a proprietary technology that allows passive

More information

SLVU2.8. PROTECTION PRODUCTS Absolute Maximum Rating. Electrical Characteristics I T I PP V R I PT I F. www.semtech.com. 2008 Semtech Corp.

SLVU2.8. PROTECTION PRODUCTS Absolute Maximum Rating. Electrical Characteristics I T I PP V R I PT I F. www.semtech.com. 2008 Semtech Corp. Description The SL series of transient voltage suppressors are designed to protect low voltage, state-of-the-art MOS semiconductors from transients caused by electrostatic discharge (ESD), cable discharge

More information

LC03-3.3. Low Capacitance 3.3 Volt TVS for High Speed Interfaces. PROTECTION PRODUCTS Description. Features. Applications

LC03-3.3. Low Capacitance 3.3 Volt TVS for High Speed Interfaces. PROTECTION PRODUCTS Description. Features. Applications Descrition The LC3-3.3 transient voltage suressor is designed to rotect comonents which are connected to high seed data and telecommunication lines from voltage surges caused by lightning, electrostatic

More information

RClamp0522PA RClamp0524PA

RClamp0522PA RClamp0524PA PROTECTION PRODUCTS - RailClamp Description RailClamp TVS arrays are ultra low capacitance ESD protection devices designed to protect high speed data interfaces. This series has been specifically designed

More information

µclamp3601p TVS Diode for Proximity Switch Input Protection PROTECTION PRODUCTS - MicroClamp Description Features Mechanical Characteristics

µclamp3601p TVS Diode for Proximity Switch Input Protection PROTECTION PRODUCTS - MicroClamp Description Features Mechanical Characteristics PRTECTIN PRDUCTS - MicroClamp Description The µclamp P is a high-surge transient voltage suppressor (TVS) optimized for protection of sensitive digital sensors used in proximity switches and industrial

More information

LC05-6. Dual Low Capacitance TVS Array for Telecom Line-Card Applications. PROTECTION PRODUCTS Description. Features. Mechanical Characteristics

LC05-6. Dual Low Capacitance TVS Array for Telecom Line-Card Applications. PROTECTION PRODUCTS Description. Features. Mechanical Characteristics Description The LC5-6 has been specifically designed to protect sensitive components which are connected to highspeed telecommunications lines from over voltages caused by lightning, electrostatic discharge

More information

uclamp3301d Low Voltage µclamp TM for ESD and CDE Protection PROTECTION PRODUCTS - MicroClamp TM Description Features Mechanical Characteristics

uclamp3301d Low Voltage µclamp TM for ESD and CDE Protection PROTECTION PRODUCTS - MicroClamp TM Description Features Mechanical Characteristics MicroClamp TM Description The µclamp TM series of Transient oltage Suppressors (TS) are designed to replace multilayer varistors (MLs) in portable applications such as cell phones, notebook computers,

More information

LC01-6. Low Capacitance TVS for High-Speed Telecommunication Systems. PROTECTION PRODUCTS Description. Features. Applications

LC01-6. Low Capacitance TVS for High-Speed Telecommunication Systems. PROTECTION PRODUCTS Description. Features. Applications escription The transient voltage suppressor is designed to protect components which are connected to high speed telecommunication lines from voltage surges caused by lightning, electrostatic discharge

More information

RClamp0522P RClamp0524P

RClamp0522P RClamp0524P PROTECTION PRODUCTS - RailClamp Description RailClamp TVS arrays are ultra low capacitance ESD protection devices designed to protect high speed data interfaces. This series has been specifically designed

More information

LCDA12C-8 and LCDA15C-8

LCDA12C-8 and LCDA15C-8 ROTECTION RODUCTS Descrition The LCDAxxC-8 has been secifically designed to rotect sensitive comonents which are connected to data and transmission lines from over voltages caused by electrostatic discharge

More information

SM712 Series 600W Asymmetrical TVS Diode Array

SM712 Series 600W Asymmetrical TVS Diode Array SM712 Series 6W Asymmetrical TVS Diode Array RoHS Pb GREEN Description The SM712 TVS Diode Array is designed to protect RS-485 applications with asymmetrical working voltages (-7V to from damage due to

More information

SM Series 400W TVS Diode Array

SM Series 400W TVS Diode Array General Purpose ESD Protection - SM5 through SM3 SM Series W TVS Diode Array RoHS Pb GREEN Description The SM series TVS Diode Array is designed to protect sensitive equipment from damage due to electrostatic

More information

TClamp1272S Low Capacitance TClamp Surge Protection for xdsl Interfaces

TClamp1272S Low Capacitance TClamp Surge Protection for xdsl Interfaces - TransClamp Description The TClamp 1272S provides dedicated line driver side srge and ESD protection for ADSL and VDSL applications. It is designed to replace mltiple discrete components in portable applications.

More information

NUP4106. Low Capacitance Surface Mount TVS for High-Speed Data Interfaces SO 8 LOW CAPACITANCE VOLTAGE SUPPRESSOR 500 WATTS PEAK POWER 3.

NUP4106. Low Capacitance Surface Mount TVS for High-Speed Data Interfaces SO 8 LOW CAPACITANCE VOLTAGE SUPPRESSOR 500 WATTS PEAK POWER 3. Low Capacitance Surface Mount TVS for High-Speed Data Interfaces The NUP0 transient voltage suppressor is designed to protect equipment attached to high speed communication lines from ESD and lightning.

More information

LC03-6R2G. Low Capacitance Surface Mount TVS for High-Speed Data Interfaces. SO-8 LOW CAPACITANCE VOLTAGE SUPPRESSOR 2 kw PEAK POWER 6 VOLTS

LC03-6R2G. Low Capacitance Surface Mount TVS for High-Speed Data Interfaces. SO-8 LOW CAPACITANCE VOLTAGE SUPPRESSOR 2 kw PEAK POWER 6 VOLTS Low Capacitance Surface Mount TVS for High-Speed Data terfaces The LC3- transient voltage suppressor is designed to protect equipment attached to high speed communication lines from ESD, EFT, and lighting.

More information

ESD9X3.3ST5G Series, SZESD9X3.3ST5G Series. Transient Voltage Suppressors Micro Packaged Diodes for ESD Protection

ESD9X3.3ST5G Series, SZESD9X3.3ST5G Series. Transient Voltage Suppressors Micro Packaged Diodes for ESD Protection ESD9X3.3ST5G Series, SZESD9X3.3ST5G Series Transient Voltage Suppressors Micro Packaged Diodes for ESD Protection The ESD9X Series is designed to protect voltage sensitive components from ESD. Excellent

More information

ESD7484. 4-Line Ultra-Large Bandwidth ESD Protection

ESD7484. 4-Line Ultra-Large Bandwidth ESD Protection 4-Line Ultra-Large Bandwidth ESD Protection Functional Description The ESD7484 chip is a monolithic, application specific discrete device dedicated to ESD protection of the HDMI connection. It also offers

More information

RClamp 3354S Low Voltage RClamp Surge Protection for GbE Interfaces

RClamp 3354S Low Voltage RClamp Surge Protection for GbE Interfaces - RailClamp Description RailClamp TVS diodes are specifi cally designed to protect sensitive components which are connected to high-speed data and transmission lines from overvoltage cased by ESD (electrostatic

More information

NUP2105L, SZNUP2105L. Dual Line CAN Bus Protector SOT 23 DUAL BIDIRECTIONAL VOLTAGE SUPPRESSOR 350 W PEAK POWER

NUP2105L, SZNUP2105L. Dual Line CAN Bus Protector SOT 23 DUAL BIDIRECTIONAL VOLTAGE SUPPRESSOR 350 W PEAK POWER Dual Line CAN Bus Protector The SZ/NUP215L has been designed to protect the CAN transceiver in high speed and fault tolerant networks from ESD and other harmful transient voltage events. This device provides

More information

CAN bus ESD protection diode

CAN bus ESD protection diode Rev. 04 15 February 2008 Product data sheet 1. Product profile 1.1 General description in a small SOT23 (TO-236AB) Surface-Mounted Device (SMD) plastic package designed to protect two automotive Controller

More information

PRTR5V0U2F; PRTR5V0U2K

PRTR5V0U2F; PRTR5V0U2K Rev. 02 19 February 2009 Product data sheet 1. Product profile 1.1 General description Ultra low capacitance double rail-to-rail ElectroStatic Discharge (ESD) protection devices in leadless ultra small

More information

SMS05C through SMS24C

SMS05C through SMS24C ROTECTION RODUCTS Descrition The SMS series of TS arrays are designed to rotect sensitive electronics from damage or latch-u due to ESD and other voltage-induced transient events. Each device will rotect

More information

CM1213A-04SO, SZCM1213A-04SO 4-Channel Low Capacitance ESD Protection Array

CM1213A-04SO, SZCM1213A-04SO 4-Channel Low Capacitance ESD Protection Array CM1213A-04SO, SZCM1213A-04SO 4-Channel Low Capacitance ESD Protection Array Product Description CM1213A 04SO has been designed to provide ESD protection for electronic components or subsystems requiring

More information

DVIULC6-4SC6. Ultra low capacitance ESD protection. Main applications. Complies with these standards: Description. Benefits. Features.

DVIULC6-4SC6. Ultra low capacitance ESD protection. Main applications. Complies with these standards: Description. Benefits. Features. Ultra low capacitance ESD protection Main applications DVI ports up to 1.65 Gb/s HDMI ports up to 1.65 Gb/s IEEE 1394a and IEEE 1394b ports up to 1.6 Gb/s USB2.0 ports up to 480 Mb/s (high speed), backwards

More information

How To Make An Electric Static Discharge (Esd) Protection Diode

How To Make An Electric Static Discharge (Esd) Protection Diode Rev. 01 0 October 2008 Product data sheet 1. Product profile 1.1 General description Ultra low capacitance bidirectional ElectroStatic Discharge (ESD) protection diodes in small Surface-Mounted Device

More information

SESD Series Ultra Low Capacitance Discrete TVS

SESD Series Ultra Low Capacitance Discrete TVS SESD Series Ultra Low apacitance Discrete TVS RoHS Pb GREEN ELV Description The SESD Series Ultra Low apacitance Discrete TVS provides unidirectional and bidirectional ESD protection for the world s most

More information

SD05C through SD24C. Single Line TVS Diode for ESD Protection in Portable Electronics PRELIMINARY Features. PROTECTION PRODUCTS Description

SD05C through SD24C. Single Line TVS Diode for ESD Protection in Portable Electronics PRELIMINARY Features. PROTECTION PRODUCTS Description Descrition The SDxxC TS diodes are designed to relace multilayer varistors (MLs) in ortable alications such as cell hones, notebook comuters, and DA s. They offer suerior electrical characteristics such

More information

ESD protection for high-speed interfaces

ESD protection for high-speed interfaces Rev. 1 1 October 212 Product data sheet 1. Product profile 1.1 General description The device is designed to protect high-speed interfaces such as High-Definition Multimedia Interface (HDMI), DisplayPort,

More information

DG2515, DG2516. 3-Ω, 235-MHz Bandwidth, Dual SPDT Analog Switch. Vishay Siliconix. Not for New Design. RoHS COMPLIANT DESCRIPTION FEATURES BENEFITS

DG2515, DG2516. 3-Ω, 235-MHz Bandwidth, Dual SPDT Analog Switch. Vishay Siliconix. Not for New Design. RoHS COMPLIANT DESCRIPTION FEATURES BENEFITS Not for New Design DG, DG -Ω, -MHz Bandwidth, Dual SPDT Analog Switch DESCRIPTION The DG, DG are low-voltage dual single-pole/ double-throw monolithic CMOS analog switches. Designed to operate from.8 V

More information

How To Test A Sidactor Series For A Power Supply

How To Test A Sidactor Series For A Power Supply SDP Series - SOT23-5 RoHS Pb e3 Description This new SIDACtor series is targeted for the tertiary or line driver side protection position for VDSL2+, ADSL2 applications and general I/O protection functions.

More information

P6KE6.8A thru P6KE540A. TRANSZORB Transient Voltage Suppressors. Vishay General Semiconductor. www.vishay.com FEATURES PRIMARY CHARACTERISTICS

P6KE6.8A thru P6KE540A. TRANSZORB Transient Voltage Suppressors. Vishay General Semiconductor. www.vishay.com FEATURES PRIMARY CHARACTERISTICS TRANSZORB Transient Voltage Suppressors DO-204AC (DO-15) PRIMARY CHARACTERISTICS V WM 5.8 V to 459 V V BR uni-directional 6.8 V to 540 V V BR bi-directional 6.8 V to 440 V P PPM 600 W P D 5.0 W I FSM (uni-directional

More information

PS323. Precision, Single-Supply SPST Analog Switch. Features. Description. Block Diagram, Pin Configuration, and Truth Table. Applications PS323 PS323

PS323. Precision, Single-Supply SPST Analog Switch. Features. Description. Block Diagram, Pin Configuration, and Truth Table. Applications PS323 PS323 Features ÎÎLow On-Resistance (33-ohm typ.) Minimizes Distortion and Error Voltages ÎÎLow Glitching Reduces Step Errors in Sample-and-Holds. Charge Injection, 2pC typ. ÎÎSingle-Supply Operation (+2.5V to

More information

LIN-bus ESD protection diode

LIN-bus ESD protection diode Rev. 3 31 May 2011 Product data sheet 1. Product profile 1.1 General description in a very small SOD323 (SC-76) Surface-Mounted Device (SMD) plastic package designed to protect one automotive Local Interconnect

More information

NTMS4920NR2G. Power MOSFET 30 V, 17 A, N Channel, SO 8 Features

NTMS4920NR2G. Power MOSFET 30 V, 17 A, N Channel, SO 8 Features NTMS9N Power MOSFET 3 V, 7 A, N Channel, SO Features Low R DS(on) to Minimize Conduction Losses Low Capacitance to Minimize Driver Losses Optimized Gate Charge to Minimize Switching Losses These Devices

More information

Femtofarad bidirectional ESD protection diode

Femtofarad bidirectional ESD protection diode Rev. 3 24 October 2011 Product data sheet 1. Product profile 1.1 General description Femtofarad bidirectional ElectroStatic Discharge (ESD) protection diode in a leadless ultra small SOD882 Surface-Mounted

More information

USBP01-5M8. ESD protection for enhanced micro USB interface. Features. Applications. Description. Complies with following standards

USBP01-5M8. ESD protection for enhanced micro USB interface. Features. Applications. Description. Complies with following standards USBP01-5M8 ESD protection for enhanced micro USB interface Datasheet production data Features D+/D- and ID lines protection with 7 V low voltage diodes (LV) V BUS line protection with 32 V high voltage

More information

1.5KE6.8A thru 1.5KE540A, 1N6267A thru 1N6303A. TRANSZORB Transient Voltage Suppressors. Vishay General Semiconductor. www.vishay.

1.5KE6.8A thru 1.5KE540A, 1N6267A thru 1N6303A. TRANSZORB Transient Voltage Suppressors. Vishay General Semiconductor. www.vishay. TRANSZORB Transient Voltage Suppressors Case Style.5KE FEATURES Glass passivated chip junction Available in uni-directional and bi-directional 500 W peak pulse power capability with a /0 μs waveform, repetitive

More information

Pin Connections and Package Marking. GUx

Pin Connections and Package Marking. GUx Surface Mount RF PIN Switch Diodes Technical Data HSMP-389x Series HSMP-89x Series Features Unique Configurations in Surface Mount Packages Add Flexibility Save Board Space Reduce Cost Switching Low Capacitance

More information

High-Bandwidth, Low Voltage, Dual SPDT Analog Switches

High-Bandwidth, Low Voltage, Dual SPDT Analog Switches DG, DG High-Bandwidth, Low Voltage, Dual SPDT Analog Switches DESCRIPTION The DG/DG are monolithic CMOS dual single-pole/double-throw (SPDT) analog switchs. They are specifically designed for low-voltage,

More information

DSL01-xxxSC5. Secondary protection for DSL lines. Features. Description. Applications. Benefits. Complies with the following standards

DSL01-xxxSC5. Secondary protection for DSL lines. Features. Description. Applications. Benefits. Complies with the following standards -xxxsc5 Secondary protection for DSL lines Features Low capacitance devices: -xxxsc5: Delta C typ = 3.5 pf High surge capability: 30 A - 8/20 µs Voltage: 8 V, 10.5 V, 16 V, and 24 V RoHS package Benefits

More information

PESDxU1UT series. 1. Product profile. Ultra low capacitance ESD protection diode in SOT23 package. 1.1 General description. 1.

PESDxU1UT series. 1. Product profile. Ultra low capacitance ESD protection diode in SOT23 package. 1.1 General description. 1. Rev. 02 20 August 2009 Product data sheet 1. Product profile 1.1 General description Ultra low capacitance ElectroStatic Discharge (ESD) protection diode in a SOT23 (TO-236AB) small SMD plastic package

More information

RClamp2574NQ. High Power TVS for Ethernet Interfaces. PROTECTION PRODUCTS - RailClamp Description. Features. Mechanical Characteristics.

RClamp2574NQ. High Power TVS for Ethernet Interfaces. PROTECTION PRODUCTS - RailClamp Description. Features. Mechanical Characteristics. - Raillam Descrition Raillam TS diodes are secifically designed to rotect sensitive comonents which are connected to high-seed data and transmission lines from overvoltage caused by ESD (electrostatic

More information

Y.LIN ELECTRONICS CO.,LTD.

Y.LIN ELECTRONICS CO.,LTD. Features Current transfer ratio (CTR 50~600% at I F =5mA, V CE =5V) High isolation voltage between input and output (Viso=5000 V rms ) Creepage distance >7.62 mm Operating temperature up to +110 C Compact

More information

MADR-009190-0001TR. Quad Driver for GaAs FET or PIN Diode Switches and Attenuators Rev. 4. Functional Schematic. Features.

MADR-009190-0001TR. Quad Driver for GaAs FET or PIN Diode Switches and Attenuators Rev. 4. Functional Schematic. Features. Features High Voltage CMOS Technology Four Channel Positive Voltage Control CMOS device using TTL input levels Low Power Dissipation Low Cost Lead-Free SOIC-16 Plastic Package Halogen-Free Green Mold Compound

More information

ESDLIN1524BJ. Transil, transient voltage surge suppressor diode for ESD protection. Features. Description SOD323

ESDLIN1524BJ. Transil, transient voltage surge suppressor diode for ESD protection. Features. Description SOD323 Transil, transient voltage surge suppressor diode for ESD protection Datasheet production data Features Max peak pulse power 160 W (8/0 µs) Asymmetrical bidirectional device Stand-off voltage: 15 and 4

More information

P6KE. Transil, transient voltage surge suppressor (TVS) Features. Description. Complies with the following standards

P6KE. Transil, transient voltage surge suppressor (TVS) Features. Description. Complies with the following standards Transil, transient voltage surge suppressor (TVS) Datasheet production data Features Peak pulse power: 600 W (10/0 µs ) Stand-off voltage range 6.8 to 440 V Unidirectional and bidirectional types Low clamping

More information

MADR-009443-0001TR. Quad Driver for GaAs FET or PIN Diode Switches and Attenuators. Functional Schematic. Features. Description. Pin Configuration 2

MADR-009443-0001TR. Quad Driver for GaAs FET or PIN Diode Switches and Attenuators. Functional Schematic. Features. Description. Pin Configuration 2 Features Functional Schematic High Voltage CMOS Technology Four Channel Positive Voltage Control CMOS device using TTL input levels Low Power Dissipation Low Cost 4x4 mm, 20-lead PQFN Package 100% Matte

More information

ETP01-xx21. Protection for Ethernet lines. Features. Description. Applications. Benefits. Complies with the following standards

ETP01-xx21. Protection for Ethernet lines. Features. Description. Applications. Benefits. Complies with the following standards ETP0-xx2 Protection for Ethernet lines Features Differential and common mode protection Telcordia GR089 Intrabuilding: 50 A, 2/0 µs ITU-T K20/2: 40 A, 5/30 µs Low capacitance: 3 pf max at 0 V UL94 V0 approved

More information

CM2009. VGA Port Companion Circuit

CM2009. VGA Port Companion Circuit VGA Port Companion Circuit Product Description The CM2009 connects between a video graphics controller embedded in a PC, graphics adapter card or set top box and the VGA or DVI I port connector. The CM2009

More information

1.5SMC6.8AT3G Series, SZ1.5SMC6.8AT3G Series. 1500 Watt Peak Power Zener Transient Voltage Suppressors. Unidirectional*

1.5SMC6.8AT3G Series, SZ1.5SMC6.8AT3G Series. 1500 Watt Peak Power Zener Transient Voltage Suppressors. Unidirectional* .6.8AT3G Series, SZ.6.8AT3G Series 00 Watt Peak Power Zener Transient Voltage Suppressors Unidirectional* The series is designed to protect voltage sensitive components from high voltage, high energy transients.

More information

1 pc Charge Injection, 100 pa Leakage CMOS 5 V/5 V/3 V 4-Channel Multiplexer ADG604

1 pc Charge Injection, 100 pa Leakage CMOS 5 V/5 V/3 V 4-Channel Multiplexer ADG604 a FEATURES 1 pc Charge Injection (Over the Full Signal Range) 2.7 V to 5.5 V ual Supply 2.7 V to 5.5 ingle Supply Automotive Temperature Range: 4 C to +125 C 1 pa Max @ 25 C Leakage Currents 85 Typ On

More information

High Power Infrared Emitting Diode, 940 nm, GaAlAs/GaAs

High Power Infrared Emitting Diode, 940 nm, GaAlAs/GaAs TSAL64 High Power Infrared Emitting Diode, 94 nm, GaAlAs/GaAs DESCRIPTION 94 8389 TSAL64 is an infrared, 94 nm emitting diode in GaAlAs/GaAs technology with high radiant power molded in a blue-gray plastic

More information

IP4294CZ10-TBR. ESD protection for ultra high-speed interfaces

IP4294CZ10-TBR. ESD protection for ultra high-speed interfaces XSON1 Rev. 4 1 November 213 Product data sheet 1. Product profile 1.1 General description The device is designed to protect high-speed interfaces such as SuperSpeed USB, High-Definition Multimedia Interface

More information

Single-channel common-mode filter with integrated ESD protection network

Single-channel common-mode filter with integrated ESD protection network Single-channel common-mode filter with integrated ESD protection network Rev. 2 29 May 2013 Product data sheet 1. Product profile 1.1 General description 2-lines (one differential channel) common-mode

More information

BZW50. Transil, transient voltage surge suppressor (TVS) Features. Description

BZW50. Transil, transient voltage surge suppressor (TVS) Features. Description Transil, transient voltage surge suppressor (TVS) Datasheet production data Features Peak pulse power: 5000 W (10/0 µs) Stand-off voltage range from 10 V to 180 V Unidirectional and bidirectional types

More information

Features. Applications. Truth Table. Close

Features. Applications. Truth Table. Close ASSR-8, ASSR-9 and ASSR-8 Form A, Solid State Relay (Photo MOSFET) (0V/0.A/0Ω) Data Sheet Description The ASSR-XX Series consists of an AlGaAs infrared light-emitting diode (LED) input stage optically

More information

4N25 Phototransistor Optocoupler General Purpose Type

4N25 Phototransistor Optocoupler General Purpose Type 4N Phototransistor Optocoupler General Purpose Type Data Sheet Lead (Pb) Free RoHS 6 fully compliant RoHS 6 fully compliant options available; -xxxe denotes a lead-free product Description The 4N is an

More information

PDS5100H. Product Summary. Features and Benefits. Mechanical Data. Description and Applications. Ordering Information (Note 5) Marking Information

PDS5100H. Product Summary. Features and Benefits. Mechanical Data. Description and Applications. Ordering Information (Note 5) Marking Information Green 5A HIGH VOLTAGE SCHOTTKY BARRIER RECTIFIER POWERDI 5 Product Summary I F V R V F MAX (V) I R MAX (ma) (V) (A) @ +25 C @ +25 C 1 5..71.35 Description and Applications This Schottky Barrier Rectifier

More information

UNISONIC TECHNOLOGIES CO., LTD 50N06 Power MOSFET

UNISONIC TECHNOLOGIES CO., LTD 50N06 Power MOSFET UNISONIC TECHNOLOGIES CO., LTD 50N06 50 Amps, 60 Volts N-CHANNEL POWER MOSFET DESCRIPTION TO-263 TO-25 The UTC 50N06 is three-terminal silicon device with current conduction capability of about 50A, fast

More information

Characteristics Values Units. Rectangular waveform 0.5 A. range - 55 to 150 C

Characteristics Values Units. Rectangular waveform 0.5 A. range - 55 to 150 C Bulletin I075 rev. C 05/06 IR0530CSPTRPbF 0.5 Amp 30 Volt Features Ultra Low V F To Footprint Area Very Low Profile (

More information

3-Channel Supervisor IC for Power Supply

3-Channel Supervisor IC for Power Supply 3-Channel Supervisor IC for Power Supply Features Over-voltage protection and lockout Under-voltage protection and lockout Open drain power good output signal Built-in 300mS delay for power good 38mS de-bounce

More information

SC603 CHARGE PUMP REGULATOR WITH SELECTABLE 5.0V/4.5V OUTPUT POWER MANAGEMENT

SC603 CHARGE PUMP REGULATOR WITH SELECTABLE 5.0V/4.5V OUTPUT POWER MANAGEMENT Description The SC603 is a versatile charge pump designed for use in battery operated power supply applications. The wide input range is matched for Li-Ion battery applications. nly two tiny ceramic bucket

More information

PHOTOTRANSISTOR OPTOCOUPLERS

PHOTOTRANSISTOR OPTOCOUPLERS MCT2 MCT2E MCT20 MCT27 WHITE PACKAGE (-M SUFFIX) BLACK PACKAGE (NO -M SUFFIX) DESCRIPTION The MCT2XXX series optoisolators consist of a gallium arsenide infrared emitting diode driving a silicon phototransistor

More information

PUSB3FR4. 1. Product profile. ESD protection for ultra high-speed interfaces. 1.1 General description. 1.2 Features and benefits. 1.

PUSB3FR4. 1. Product profile. ESD protection for ultra high-speed interfaces. 1.1 General description. 1.2 Features and benefits. 1. XSON1 Rev. 1 26 January 215 Product data sheet 1. Product profile 1.1 General description The device is designed to protect high-speed interfaces such as SuperSpeed USB 3.1 at 1 Gbps, High-Definition Multimedia

More information

Dual-Host / Dual-SIM Card Crosspoint Analog Switch

Dual-Host / Dual-SIM Card Crosspoint Analog Switch FSA2866 Dual-Host / Dual-SIM Card Crosspoint Analog Switch Features Switch Type 2x2 Crosspoint Switch Input Type Data Input Signal Range 0 to V CC V CC 1.65V to 4.30V R ON Data 2Ω (Typical) VSIM 2Ω (Typical)

More information

Metal-Oxide Varistors (MOVs) Surface Mount Multilayer Varistors (MLVs) > MLN Series. MLN SurgeArray TM Suppressor. Description

Metal-Oxide Varistors (MOVs) Surface Mount Multilayer Varistors (MLVs) > MLN Series. MLN SurgeArray TM Suppressor. Description MLN SurgeArray TM Suppressor RoHS Description The MLN SurgeArray Suppressor is designed to help protect components from transient voltages that exist at the circuit board level. This device provides four

More information

MADR-009269-0001TR. Single Driver for GaAs FET or PIN Diode Switches and Attenuators Rev. V1. Functional Schematic. Features.

MADR-009269-0001TR. Single Driver for GaAs FET or PIN Diode Switches and Attenuators Rev. V1. Functional Schematic. Features. Features High Voltage CMOS Technology Complementary Outputs Positive Voltage Control CMOS device using TTL input levels Low Power Dissipation Low Cost Plastic SOIC-8 Package 100% Matte Tin Plating over

More information

MADP-000504-10720T. Non Magnetic MELF PIN Diode

MADP-000504-10720T. Non Magnetic MELF PIN Diode MADP-54-172T Features High Power Handling Low Loss / Low Distortion Leadless Low Inductance MELF Package Non-Magnetic Surface Mountable RoHS Compliant MSL 1 Package Style 172 Dot Denotes Cathode Description

More information

1SMB59xxBT3G Series, SZ1SMB59xxT3G Series. 3 Watt Plastic Surface Mount Zener Voltage Regulators

1SMB59xxBT3G Series, SZ1SMB59xxT3G Series. 3 Watt Plastic Surface Mount Zener Voltage Regulators 9xxBTG Series, SZ9xxTG Series Watt Plastic Surface Mount Zener Voltage Regulators This complete new line of W Zener diodes offers the following advantages. Features Zener Voltage Range. V to V ESD Rating

More information

Power MOSFET FEATURES. IRF520PbF SiHF520-E3 IRF520 SiHF520. PARAMETER SYMBOL LIMIT UNIT Drain-Source Voltage V DS 100 V Gate-Source Voltage V GS ± 20

Power MOSFET FEATURES. IRF520PbF SiHF520-E3 IRF520 SiHF520. PARAMETER SYMBOL LIMIT UNIT Drain-Source Voltage V DS 100 V Gate-Source Voltage V GS ± 20 Power MOSFET PRODUCT SUMMARY (V) 100 R DS(on) ( ) = 0.7 Q g (Max.) (nc) 16 Q gs (nc) 4.4 Q gd (nc) 7.7 Configuration Single TO0AB G DS ORDERING INFORMATION Package Lead (Pb)free SnPb G D S NChannel MOSFET

More information

C650 and C850 Series TBU High-Speed Protectors

C650 and C850 Series TBU High-Speed Protectors *RoHS COMPLIANT Features Formerly brand Extremely high speed performance Blocks high voltages and currents Very high bandwidth; GHz compatible Small package, minimal PCB area Simple, superior circuit protection

More information

MASW-007070-0001TB. GaAs SPST Switch, Absorptive, Single Supply, DC-4.0 GHz. Features. Pin Configuration 1,2,3,4. Description. Ordering Information

MASW-007070-0001TB. GaAs SPST Switch, Absorptive, Single Supply, DC-4.0 GHz. Features. Pin Configuration 1,2,3,4. Description. Ordering Information Features Operates DC - 4 GHz on Single Supply ASIC TTL / CMOS Driver Low DC Power Consumption 50 Ohm Nominal Impedance Test Boards are Available Tape and Reel are Available Lead-Free 4 x 6 mm PQFN Package

More information

1SMA5.0AT3G Series, SZ1SMA5.0AT3G Series. 400 Watt Peak Power Zener Transient Voltage Suppressors. Unidirectional

1SMA5.0AT3G Series, SZ1SMA5.0AT3G Series. 400 Watt Peak Power Zener Transient Voltage Suppressors. Unidirectional .AT3G Series, SZ.AT3G Series 4 Watt Peak Power Zener Transient Voltage Suppressors Unidirectional The series is designed to protect voltage sensitive components from high voltage, high energy transients.

More information

CLA4607-085LF: Surface Mount Limiter Diode

CLA4607-085LF: Surface Mount Limiter Diode DATA SHEET CLA4607-085LF: Surface Mount Limiter Diode Applications Low-loss, high-power limiters Receiver protectors Anode (Pin 1) Anode (Pin 3) Features Low thermal resistance: 55 C/W Typical threshold

More information

STP80NF55-08 STB80NF55-08 STB80NF55-08-1 N-CHANNEL 55V - 0.0065 Ω - 80A D2PAK/I2PAK/TO-220 STripFET II POWER MOSFET

STP80NF55-08 STB80NF55-08 STB80NF55-08-1 N-CHANNEL 55V - 0.0065 Ω - 80A D2PAK/I2PAK/TO-220 STripFET II POWER MOSFET STP80NF55-08 STB80NF55-08 STB80NF55-08-1 N-CHANNEL 55V - 0.0065 Ω - 80A D2PAK/I2PAK/TO-220 STripFET II POWER MOSFET TYPE V DSS R DS(on) I D STB80NF55-08/-1 STP80NF55-08 55 V 55 V

More information

A I DM. W/ C V GS Gate-to-Source Voltage ± 20. Thermal Resistance Symbol Parameter Typ. Max. Units

A I DM. W/ C V GS Gate-to-Source Voltage ± 20. Thermal Resistance Symbol Parameter Typ. Max. Units V DS 2 V V GS Max ± 2 V R DSon) max @V GS = V) 24 m * PD - 9787A HEXFET Power MOSFET R DSon) max @V GS = 4.V) 4 m 6 Micro3 TM SOT-23) Applications) Load System Switch Features and Benefits Features Benefits

More information

Features. Symbol JEDEC TO-220AB

Features. Symbol JEDEC TO-220AB Data Sheet June 1999 File Number 2253.2 3A, 5V,.4 Ohm, N-Channel Power MOSFET This is an N-Channel enhancement mode silicon gate power field effect transistor designed for applications such as switching

More information

Features. Modulation Frequency (khz) VDD. PLL Clock Synthesizer with Spread Spectrum Circuitry GND

Features. Modulation Frequency (khz) VDD. PLL Clock Synthesizer with Spread Spectrum Circuitry GND DATASHEET IDT5P50901/2/3/4 Description The IDT5P50901/2/3/4 is a family of 1.8V low power, spread spectrum clock generators capable of reducing EMI radiation from an input clock. Spread spectrum technique

More information

Power MOSFET. IRF510PbF SiHF510-E3 IRF510 SiHF510. PARAMETER SYMBOL LIMIT UNIT Drain-Source Voltage V DS 100 V Gate-Source Voltage V GS ± 20

Power MOSFET. IRF510PbF SiHF510-E3 IRF510 SiHF510. PARAMETER SYMBOL LIMIT UNIT Drain-Source Voltage V DS 100 V Gate-Source Voltage V GS ± 20 Power MOSFET PRODUCT SUMMARY (V) 100 R DS(on) () = 0.54 Q g max. (nc) 8.3 Q gs (nc) 2.3 Q gd (nc) 3.8 Configuration Single D TO220AB G FEATURES Dynamic dv/dt rating Available Repetitive avalanche rated

More information

Table 1. Absolute maximum ratings (T amb = 25 C) Symbol Parameter Value Unit. ISO 10605 - C = 330 pf, R = 330 Ω : Contact discharge Air discharge

Table 1. Absolute maximum ratings (T amb = 25 C) Symbol Parameter Value Unit. ISO 10605 - C = 330 pf, R = 330 Ω : Contact discharge Air discharge Automotive dual-line Transil, transient voltage suppressor (TVS) for CAN bus Datasheet - production data Complies with the following standards ISO 10605 - C = 150 pf, R = 330 Ω : 30 kv (air discharge)

More information

IP4234CZ6. 1. Product profile. Single USB 2.0 ESD protection to IEC 61000-4-2 level 4. 1.1 General description. 1.2 Features. 1.

IP4234CZ6. 1. Product profile. Single USB 2.0 ESD protection to IEC 61000-4-2 level 4. 1.1 General description. 1.2 Features. 1. Rev. 01 16 April 2009 Product data sheet 1. Product profile 1.1 General description The is designed to protect Input/Output (I/O) USB 2.0 ports, that are sensitive to capacitive loads, from being damaged

More information

Power MOSFET FEATURES. IRL540PbF SiHL540-E3 IRL540 SiHL540

Power MOSFET FEATURES. IRL540PbF SiHL540-E3 IRL540 SiHL540 Power MOSFET PRODUCT SUMMARY (V) 100 R DS(on) (Ω) = 5.0 V 0.077 Q g (Max.) (nc) 64 Q gs (nc) 9.4 Q gd (nc) 27 Configuration Single TO220AB G DS ORDERING INFORMATION Package Lead (Pb)free SnPb G D S NChannel

More information

Power MOSFET FEATURES. IRF610PbF SiHF610-E3 IRF610 SiHF610. PARAMETER SYMBOL LIMIT UNIT Drain-Source Voltage V DS 200 V Gate-Source Voltage V GS ± 20

Power MOSFET FEATURES. IRF610PbF SiHF610-E3 IRF610 SiHF610. PARAMETER SYMBOL LIMIT UNIT Drain-Source Voltage V DS 200 V Gate-Source Voltage V GS ± 20 Power MOSFET PRODUCT SUMMARY (V) 00 R DS(on) ( ) = 1.5 Q g (Max.) (nc) 8. Q gs (nc) 1.8 Q gd (nc) 4.5 Configuration Single FEATURES Dynamic dv/dt Rating Repetitive Avalanche Rated Fast Switching Ease of

More information

A I DM. W/ C V GS Gate-to-Source Voltage ± 12. Thermal Resistance Symbol Parameter Typ. Max. Units

A I DM. W/ C V GS Gate-to-Source Voltage ± 12. Thermal Resistance Symbol Parameter Typ. Max. Units V DS 2 V V GS Max ±2 V * PD - 973A HEXFET Power MOSFET R DSon) max @V GS = 4.V) 2. m R DSon) max @V GS = 2.V) 27. m 6 Micro3 TM SOT-23) Applications) Load System Switch Features and Benefits Features Benefits

More information

MAPD-007530-0001TB. Low Cost Two-Way GMIC SMT Power Divider 1700 2000 MHz Rev. V2. Features. Functional Diagram. Description. Ordering Information

MAPD-007530-0001TB. Low Cost Two-Way GMIC SMT Power Divider 1700 2000 MHz Rev. V2. Features. Functional Diagram. Description. Ordering Information Features Small Size and Low Profile Typical Insertion Loss: 0.6 db Typical Amplitude Balance: 0.2 db 1 Watt Power Handling Lead-Free SOT-26 Package 100% Matte Tin Plating over Copper Halogen-Free Green

More information

Power MOSFET FEATURES. IRF740PbF SiHF740-E3 IRF740 SiHF740. PARAMETER SYMBOL LIMIT UNIT Drain-Source Voltage V DS 400 V Gate-Source Voltage V GS ± 20

Power MOSFET FEATURES. IRF740PbF SiHF740-E3 IRF740 SiHF740. PARAMETER SYMBOL LIMIT UNIT Drain-Source Voltage V DS 400 V Gate-Source Voltage V GS ± 20 Power MOSFET PRODUCT SUMMARY (V) 400 R DS(on) (Ω) = 0.55 Q g (Max.) (nc) 63 Q gs (nc) 9.0 Q gd (nc) 3 Configuration Single FEATURES Dynamic dv/dt Rating Repetitive Avalanche Rated Fast Switching Ease of

More information

ISL6700. 80V/1.25A Peak, Medium Frequency, Low Cost, Half-Bridge Driver. Features. Ordering Information. Applications. Pinouts

ISL6700. 80V/1.25A Peak, Medium Frequency, Low Cost, Half-Bridge Driver. Features. Ordering Information. Applications. Pinouts ISL6700 Data Sheet FN9077.6 80V/1.25A Peak, Medium Frequency, Low Cost, Half-Bridge Driver The ISL6700 is an 80V/1.25A peak, medium frequency, low cost, half-bridge driver IC available in 8-lead SOIC and

More information

STIEC45-xxAS, STIEC45-xxACS

STIEC45-xxAS, STIEC45-xxACS Transil TVS for IEC 61000-4-5 compliance Datasheet - production data differential mode MIL STD 883G, method 3015-7 Class 3B 25 kv HBM (human body model) Resin meets UL 94, V0 MIL-STD-750, method 2026 solderability

More information

SIDACtor Protection Thyristors Baseband Protection (Voice-DS1) SIDACtor Series - TO-92. Description

SIDACtor Protection Thyristors Baseband Protection (Voice-DS1) SIDACtor Series - TO-92. Description SIACtor Series - TO-92 RoHS Pb e3 escription SIACtor Series TO-92 are designed to protect baseband equipment such as modems, line cards, CPE and SL from damaging overvoltage transients. The series provides

More information

Protection Design Guide for Portable Electronics

Protection Design Guide for Portable Electronics for Portable Electronics ESD and EMI Protection Solutions www.semtech.com Table of Contents ESD & EMI Protection Solutions Introduction - ESD Testing - IEC 000--2 3 ESD Protection - Board Layout Guidelines

More information