Section : Signage 212. Section : Cast Metal Plaque 212. Section : Compartments and CubicleS 213

Transcription

1 P a r t IV: De s i g n St a n d a r d s 213 Division 10: Specialties Ge n e ra l Professionals shall verify that all applicable portions of these standards are incorporated into the final construction documents and adhered to during the construction of the project. Variances from these standards by the professional and or contractor during the planning, design and construction of the project shall be submitted to the University Architect for approval. All requests for variances shall be submitted on the University s standard Request for Variance form. The following sections are included in Division 10: Section : Signage 212 Section : Cast Metal Plaque 212 Section : Compartments and CubicleS 213 Section : Toilet PartitionS 213 Section : Toilet, Bath, and Laundry AccessorieS 214 Section : Toilet AccessorieS 214 Section : Fire Protection SpecialtieS 215 Section : Fire ExtinguisherS 215

2 214 M i s s i s s i p p i St a t e Un i v e r s i t y Design and Construction Standards Manual Section : Signage All signs shall be through one source from a single manufacturer. All signs shall comply with the Americans with Disabilities Act (ADA), and with code provisions as adopted by Mississippi State University. All signs shall be based on the products indicated below. Provide the named product or a comparable product by one of the following manufacturers: ASI Sign Systems, Inc American Graphic Inc. Innerface Sign Systems, Inc. Mills Manufacturing, Inc. Mohawk Sign Systems Fabricate signs with edges mechanically and smoothly finished to comply with the edge condition square cut. Signs shall allow insertion of changeable messages in the form of transparent covers with paper inserts. Text on signs shall be accompanied with Grade 2 Braille. Room signs, Stairway signs and Toilet signs shall be constructed of Laminated Cast Acrylic Sheet with unframed perimeter. Text shall be Futura MD BT and shall be provided by owner after bidding. Copy shall be tactile and Braille. Message shall be fixed and changeable. Sign shall be 6 X 9 with minimum 5/8 high characters. Changeable message shall not be included in stairway and Toilet signs. All signs shall have white characters with background color to be selected from manufacturer s full range of colors. Section : Cast Metal Plaque Cast Metal Plaques shall be aluminum casting of alloy and tempered as recommended by manufacturer for cast process used for finish indicated. Plaque shall be 24 wide X 36 high. Letter style and text shall be selected from manufacturer s full range and approved by the Architect and Mississippi State University. Plaques shall have raised flat band border with manufacturer s background texture. Texture shall be selected by Architect and Mississippi State University. Plaque shall be mounted wit concealed studs for substrates encountered. Section

3 P a r t IV: De s i g n St a n d a r d s 215 Division 10 Section : Compartments and Cubicles Section : Toilet Partitions All toilet partitions shall be overhead braced. All toilet partitions and urinal screens shall be constructed of solid high density polyethylene (HDPE) or polypropylene (PP) panel material. Partitions shall not be less that 1 inch thick, shall be seamless with eased edges and with homogenous color and pattern throughout the thickness of the material. All accessories to include pilaster shoes, sleeves, caps brackets and hardware shall be stainless steel. Overhead cross bracing shall be fabricated from the same material as the toilet partition. Section

4 216 M i s s i s s i p p i St a t e Un i v e r s i t y Design and Construction Standards Manual Section : Toilet, Bath, and Laundry Accessories Section : Toilet Accessories All toilet accessories shall be based on the products indicated below. Provide the named product or a comparable product by one of the following manufacturers. Bay West Bobrick Washroom Equipment, Inc. Bradley Corporation Toilet Tissue (Roll) Dispenser Basis of Design Product: Bay West 723 Description: Silhouette Dubl-Serv Mounting: Surface mounted Operation: Controlled delivery; pushing back empty core releases reserve roll Capacity: Designed for 3 7/8 diameter tissue rolls Material and Finish: Plastic, black translucent Warm Air Dryer Basis of Design Product: Bradley Corporation Mounting: Semi recessed Operation: Touch button activated with timed power cut off switch Cover Material and Finish: Cast iron, with enamel finish Grab Bar Basis of Design Product: Bobrick B-5837 Mounting: Flanges with concealed fasteners Material: Stainless Steel, 18 gauge thick, finish smooth No 4 satin finish Mirror Unit Basis of Design Product: Bobrick B Frame: ¾ X ¾ stainless steel angle, corners to be welded and ground smooth, provide concealed mounting with theft resistant locking device Size: 24 X 48 Mop and Broom Holder Basis of Design Product: Bradley corporation Description: Unit with shelf, hooks, holders, and rod suspended beneath shelf. Length: 36 inches Hooks: Three Mop / Broom Holders: Four, spring loaded rubber hat, cam type. Material and Finish: Stainless steel, No.4 finish (satin). Shelf shall not be less than nominal 0.05 inch thick stainless steel. Rod shall be approximately ¼ inch diameter stainless steel Section

5 P a r t IV: De s i g n St a n d a r d s 217 Division 10 Section : Fire Protection Specialties Section : Fire Extinguishers Fabricate and label fire extinguishers to comply with NFPA 10, Portable Fire Extinguishers. All fire extinguishers and fire protection cabinets shall be through one source from a single manufacturer. Special warranty shall be provided on manufacturer s standard form in which manufacture agrees to repair or replace components of portable fire extinguisher that fail in materials or workmanship within six years fro date of Substantial Completion. Failures include but are not limited to the following: Failure of hydrostatic test according to NFPA 10 Faulty operation of valves or release levers. Fire extinguishers shall be equal to Larsen Manufacturing Company. Cabinet for fire extinguisher shall be suitable for fire extinguisher per manufacturer s recommendations. All portable extinguishers shall be in visible locations and free from obstructions. Signage shall be provided to indicate the extinguisher location where visual obstructions cannot be avoided. Section

6 218 M i s s i s s i p p i St a t e University Design and Construction Standards Manual