Accessorise your POS >

Transcription

1

2 Sitour Merchandising catalog 2014 Accessorise your POS 01 Hanging Plastic display hooks 187 Hooks and splits 189 The steel cables, chains and hooks 190 The magnets The twisters 194 The grippers 196 The suction cups 198 The pole holders 199 The snap fasteners 200 The plastic screws and rivets 201 The assembly clips and grippers 202 The straps 203 The adhesive, magnetic and velcro pad tapes

3 Accessorise your POS 01 Sitour Merchandising catalog Plastic display hooks Our range of POS Kakemono Possible materials PVC Polypro PETG Standard properties of the POS* Thickness of 40/100 or 70/100 Rounded corners recommended Perforation as preferred Type of printing Screen printing Digital printing Offset depending on quantity Universal display hook, single pin 20 mm 50 mm Clip on a split support thanks to its inverted base. Designed for blister-packed perforated products polyamide (PA6.6) White - Length 50 mm Per 100 Shelf talker PVC Polypro PETG Thickness of 40/100 or 70/100 Rounded corners recommended Perforation as preferred Screen printing Digital printing Offset depending on quantity White - Length 100 mm Per White - Length 150 mm Per 100 Front sign Expanded PVC Cellular polypro Thickness of 3 and 2 mm cut into shape or rectangular Screen printing Digital printing Offset depending on quantity Universal display hook, double pin Decorative strip On a shelf PVC Roller Synthetic material PVC PETG PS Thickness 20/100 Thickness 18/100 in rolls Thickness of 40/100, 70/100 or more Screen printing Digital printing Offset Heliography Screen printing Digital printing Offset depending on quantity 70 mm 18 mm 30 mm Clips onto a split support thanks to its inverted base. Wide and strong. The notch system on the tube makes sure the products are held in position. Designed for blister-packed products reinforced polyamide (PA6.6) Segment PVC Polypro PETG Thickness of 40/100 and 70/100 Rounded corners recommended, Perforated or not, as preferred Screen printing Digital printing Offset depending on quantity White - Length 70 mm Per White - Length 100 mm Per White - Length 150 mm Per White - Length 200 mm Per 100 Our range of decorations for your POS Properties Limitations Types of products...did you know? Select the colour of your display hooks! We can create your display hooks in your preferred colour at request (minimum quantities apply). Digital printing Mat finish UV ink or Solvent type Quantity: less than 100 Shelf talker Kakemono On a shelf Front sign Perforating display hook, single pin 186 Offset printing Stickers Stickers for lettering Shiny finish Long-lasting UV ink type Adhesive vinyl with or without printing Adhesive vinyl with or without printing Long series, more than 4000 Max. 500 x 700 mm format No quantity limitations Short series, less than 100 Additional digital printing or unit signage Shelf talker Kakemono On a shelf Divider marking Dome Kakemono Front sign Alleyway signage 200 mm 30 mm 38 mm Sticks into a cardboard support thanks to its perforating pins. The notch system on the tube makes sure the products are held in position. Designed for blister-packed perforated products polyamide (PA6.6) White - Length 100 mm Per White - Length 150 mm Per White - Length 200 mm Per Coloured Spot colour material For product referencing with a specific colour, very long series Price label Info label Support signage Shelf talker Kakemono On a shelf Front sign

4 Ø 40 mm Accessorise your POS 01 Plastic display hooks Sitour Merchandising catalog Hooks & split rings Perforating display hook, double pin Sticks into a cardboard support thanks to its 27 mm perforating pins. The notch system on the tube makes sure the products are held in position. Designed for blister-packed products with a min. polyamide (PA6.6) White - Length 100 mm Per White - Length 150 mm Per White - Length 200 mm Per White - Length 250 mm Per Black - Length 100 mm Per Black - Length 150 mm Per Black - Length 200 mm Per 100 Asymmetrical S-hook 32 mm 10 mm Suitable for heavy loads. Available in several 2 mm sizes. Metal. 18 mm Height 32 mm with loop, diam. 6 & 14 mm Per Height 32 mm with loop, diam. 7 & 15 mm Per 1000 Symmetrical S-hook table 12 mm for heavy loads. Available in several sizes. Metal. 24 mm 2 mm Height 24 mm with loop, diam. 8 mm Per Height 32 mm with loop, diam. 10 mm Per 1000 Hangtab Adapt your packaging for display on a hook with a diam. of 8 mm. Easy product set-up. Max. recommended load: 200 g. PETG Height 60 mm with loop, diam. 15 mm Per 1000 C-hook fil D2 Suitable for heavy loads. Galvanised steel D13 zone adhésive x Closed hook Per Open hook Per Length 40 mm Per 100 Oval plastic split ring Attach your posters in just a tick. Highly resistant closing system. PP. Universal hook hangtab 60 mm Strengthen blister holes. Adapts packaging for display on hooks with single and wide pins. Max. recommended load: 150 g. PETG Clear - Height Per White - Height 15 mm Per 1000 Round metal split ring 54 mm Universal hook hangtab Per 100 Ø Attach your posters in just a tick. This split ring with its hinge opening is easy to handle and highly convenient for binding purposes. Available in several diameters. Metal Diam. 19 mm. Per Label holder for double pin display hook 8 mm 45 mm 28 mm Label format: 30x25mm. through the blister hole Diam.. Per Diam. 32 mm. Per Diam. 38 mm. Per 100 Oval metal split ring Hang your signage or cross merchandising 70 mm shape and easy opening system. Metal Label holder for double pin display hook Per Metal split ring Per 100

5 2 mm Accessorise your POS 01 Chains & rod hooks Sitour Merchandising catalog Hooks Nickel-plated double twisting chain For extra resistance. Max. load: 15 Kg. Supplied as a 25 m roll. Steel with nickel surface treatment....did you know? Hang your signage at will thanks to the range of metal suspension hooks! m roll x 21 mm The unit Stretchable spring hook Galvanised Victor chain For hanging your signage. Knotted and twisted for improved rigidity. Max. recommended 25 kg for Supplied as a 100 m roll. Steel with nickel surface treatment mm 10 mm Rapidly adjust the height of your posters. Maintains height after stretching. Sticks directly Galvanised steel Can stretch up to 1000 mm - Max. load: 0.5 kg Per m roll x 23 mm The unit Nickel-plated ball chain Can stretch up to 1700 mm - Max. load: 1 kg Per Can stretch up to 2000 mm - Max. load: 3 kg Per Can stretch up to 1000 mm - Max. load: 0.5 kg Per Can stretch up to 1700 mm - Max. load: 1 kg Per Can stretch up to 2000 mm - Max. load: 3 kg Per 1000 Create bracelets for badges, colour charts, anti-theft devices for objects and labels, etc. Available as a roll, to be used with connectors or 13 cm bracelet with connector. Steel with nickel surface treatment m roll - diam. 3 mm. The unit Metal connector Per cm bracelet with connector - diam. 2.1 mm. Per 100 Wire hanger hook For hanging your posters. Discreet and modular, the poster perforations. Galvanised steel. Steel cable diam. 1.5 mm Per Per 100 Hang all types of displays. Ideal for heavy loads. Use with cable gland sleeves (2 per loop). Cable reel, diam. 1.5 mm. Steel m roll The unit Wire hanger hook For hanging your posters. Discreet and modular, into the poster perforations. Galvanised steel Sleeve (2 per loop) Per 500 Pre-galvanised double rod hook Wire hanger hook Per mm rapidly without any extra. Diam. 2 mm. Galvanised steel Length 150 mm Per Length 300 mm Per Length 500 mm Per Length 1000 mm Per Length 1500 mm Per Length 2000 mm Per 50

6 Accessorise your POS 01 Hooks Sitour Merchandising catalog Hooks Hang a hook and a light poster. PP....did you know? To hang heavy loads, opt for magnetic attachments! Square 20 x 20 mm Per Rectangle 20 x 40 mm Per Circle diam. 20 mm. Per 1000 Magnet with closed hook Closed adhesive ceiling hook Hang a hook and a light poster. Injection-made. PP. Ø 8 mm 20 mm 47 mm Ø 10 mm Hang posters in any direction. Fitted with a closed cross-shaped hook. Compatible with a tube with diam. 8 or 10 mm to create a banner hanger. Painted steel + magnet Square 18 x 18 mm - Max. load 200 g Per Small model, 4 Kg Per Large model, 8 Kg Per Circle diam. 21 mm - Max. load 300 g Per 200 Magnet with open hook Open adhesive ceiling hook Hang your signage. These open hooks make changing your posters easy. Injection-made. Max. recommended load: 600 g depending on the support base. PP. Hang a load of 8-35 kg (depending on the magnet model) from a metal support base. Painted steel + magnet Diam. 32 mm - Max. load: 8 Kg Per Diam. 47 mm - Max. load: 12 kg Per Square 23 x 23 mm Per Diam. 57 mm - Max. load: 28 Kg Per Diam. 63 mm - Max. load: 35 Kg Per 10 Plastic hook for suspended ceilings Fits to the rails of suspended ceilings. Can be used to hang your signage on hooks. Mobile and discreet. PP Clip-on hook Per Metal hook for suspended ceiling Hang your signage. These hooks consist of onto the rails of your suspended ceiling. Recommended for heavy loads. Galvanised steel Male and female assembly hook Per 20

7 Accessorise your POS 02 Twisters Sitour Merchandising catalog Twisters...how mais does comment it work? ça marche? EVENT-BASED PRODUCT SIGNAGE! A twister is an aluminium support base, which can be twisted at will to direct your poster and target your signage! Both ends of twisters are adhesive (two or three adhesive points depending on the model). Simply attach your twister to any smooth surface and create your signage, it s easy! Metal twister with 3 adhesive points your signage right next to the product. Ideal one end, allowing you to secure both sides of your Can be twisted at will to turn the poster in your preferred direction. Max. recommended load: 40g Aluminium Metal twister with 3 adhesive points Per Metal twister with 3 adhesive points Per 1000 Clean metal twister with 2 adhesive points Clear plastic twister with 2 adhesive points CLEAN your signage right next to the product. adhesive point at one end, leaving no marks on light posters and ensure permanent movement. Clear. Max. recommended load: 10g surfaces. Can be twisted at will to turn the poster in your preferred direction. Max. recommended load: 10 g. Aluminium Clean metal twister with 2 adhesive points Per Clean metal twister with 2 adhesive points Per Clear plastic twister with 2 adhesive points Per 100 Clear wobbler with 2 adhesive points Bring movement to your poster and highlight your Metal twister with 2 adhesive points POS. Flexible and invisible. Max. recommended load: 10 g your signage right next to the product. PVC ends, which can be used to attach the twister to all types of support bases. Can be twisted at will to turn the poster in your preferred direction. Max. recommended load: 40 g Aluminium mm. Per 1000 Plastic swing clip Metal twister with 2 adhesive points Per 100 Hold your signage in its initial position Metal twister with 2 adhesive points Per 1000 Ideal for thick signage. POM. Clean metal mega- twister with 2 adhesive points your signage right next to the product. adhesive point at one end, leaving no marks on Plastic swing clip Per 100 Metal swing clip surfaces. Can be twisted at will to turn the poster in your preferred direction. Max. recommended load: 50 g. Aluminium. Give your posters permanent wobble. Metal Clean metal mega- twister with 2 adhesive points Per Clean metal mega- twister with 2 adhesive points Per Metal mega- twister with 2 adhesive points For showing large posters. Can be twisted at will and retain the chosen shape for the display of your posters. Max. recommended load: 100 g. Aluminium Metal swing clip Per 100 Enhance your signage on a counter or other horizontal surface. The message will return to its initial position after movement. Max. 195 recommended load: 10 g. POM Mega-twister with 2 adhesive points Per Mega-twister with 2 adhesive points Per Per 100

8 Accessorise your POS 02 Grippers Sitour Merchandising catalog Grippers...how mais does comment it work? ça marche? Hinged T-gripper, DISPLAY YOUR SMALL SIGNAGE WHEREVER AND WHENEVER! These grippers are available in magnetic or adhesive versions and can be used to display all types of thick or thin signage. This accessory is really easy to use, simply place on the preferred support base and insert your signage in the grooves provided for this purpose Absorb impacts and maintain posters in the the adhesive base. Max. poster thickness: 2 mm Length - Adhesive Per Length 76 mm - Adhesive Per Length 76 mm - Magnetic Per 100 Narrow T-gripper Face-out display gripper, adhesive back your signage. The discreet adhesive 13 mm base is compatible with horizontal or vertical use. Max. poster thickness: 2 mm Length - Adhesive Per Length 76 mm - Adhesive Per 100 your posters face-out on all smooth surfaces thanks to the adhesive back. Max. poster thickness: 2 mm Face-out display gripper, adhesive back, Per 100 Face-out display gripper for wire basket Wide T-gripper your signage. The wide 28 mm base guarantees the stability of larger posters (max. A5 format). These multi-purpose grippers can be used horizontally or vertically. Max. poster thickness: 2 mm 2 versions are available: adhesive or magnetic. your posters face-out on all smooth surfaces thanks to the adhesive back. Max. poster thickness: 2 mm Face-out display gripper for wire basket Per Length - Adhesive Per Length 76 mm - Adhesive Per Length 76 mm - Magnetic Per Length 152 mm - Adhesive Per 100 Adhesive T-gripper, thick base Set up a thick support base: cardboard, foam, folded sleeve, thick cardboard, etc. on any smooth surface thanks to the adhesive base. 75 mm Base: 19 x 76 mm - thickness: 3 mm Per Base: 25 x 75 mm - thickness: 5 mm Per 100 Face-out double-hook display gripper for wire basket 46 mm 35 mm Attach light posters to face out from metal wire baskets, diam. 10 mm. 10 mm that your poster remains 100% straight. Length 35 mm. Max. poster thickness: 2 mm Face-out double-hook display gripper for wire basket Per 100 Shelf talker J-gripper your posters perpendicular to the shelf, Shelf talker J-gripper Per 100

9 17 mm 14 mm 7 mm 7 mm 300 mm Accessorise your POS 02 Suction cups Sitour Merchandising catalog Tube holders Suction cup Can attach your signage to glass or any other smooth surface. Sticks directly into any perforated support base Diam. 22 mm. Per mm 30 mm holder, a split PVC tube, diam. 5-7 mm, length 300 mm, and an endcap. Suitable for all light posters (max. 50 g depending on the poster). For indoor use. High-impact PS Diam. 44 mm. Per Complete kit - uninstalled Per 100 Suction cup with hook Hinged base alone Per 100 Use the hook to hang your perforated posters on the glass or any clean and smooth surface Suction cup, diam. 45 mm. Per 500 Straight tube holder Adhesive. Use with tubes with diam. 5-7 mm. vertically. Suction cup with thumbtack The clear thumbtack sticks through the poster. ø 16 mm Attach your displays to glass or any other clean and smooth surface Straight tube holder Per 100 Oblique tube holder Suction cup, diam. 45 mm. Per 500 Face-out gripper suction cup 15 mm 27 mm your posters face-out. 5 mm mm 38,5 mm Adhesive. Use with tubes with diam. 5-7 mm. vertically Oblique tube holder Per Diam 27 mm - Face-out cup Per 100 new Perpendicular gripper suction cup 26 mm 6 mm your posters perpendicular to the shelf. In Split tube 300 mm stapled posters. Can be assembled with tube holders ; and Diameter 27 mm Per 100 Screw suction cup White - Length 150 mm Per White - Length 300 mm Per new your perforated posters face-out. Fits on ø 13 mm Very strong attach with a screw. In ø 41 mm Diameter 41 mm Per did you know? White - Length 500 mm Per White - Length 700 mm Per 100 Endcap display and lock the poster in the split tube. 199 Suction cups are the ideal means of attaching your signage to glass! Our suction cups are clear and discreet and guarantee that your posters will hold still on smooth surfaces! Endcap Per 50

10 15 mm 4,5 mm 26 mm 5 mm 7,7 mm 11,7 mm 10 mm 4 mm 5 mm Accessorise your POS 03 Snap fasteners Sitour Merchandising catalog Screws & rivets Snap fastener, diam. 15 mm Screw bolt 4 mm For permanent assembly of support bases with a thickness of 9-41 mm depending on models. For the easy assembly of displays and the creation of long series. PP. 6 mm 6,5 mm 8 mm For the non-permanent assembly of posters. Clips on for assembly and unscrews for dismantling. PP White - tightening 9 mm Per Black - tightening 9 mm Per Clear - tightening 9 mm Per White - tightening 15 mm Per Black - tightening 15 mm Per Clear - tightening 15 mm Per White - tightening 41 mm Per Black - tightening 41 mm Per 1000 Metal screw bolt 6.0 mm White - tightening 6.5 mm Per White - tightening 9.5 mm Per White - tightening 12 mm Per White - tightening 19.3 mm Per White - tightening 25.4 mm Per 100 Snap fastener, diam. 28 mm For permanent assembly of support bases with a thickness of mm depending on models. For the easy assembly of displays and the creation of long series. PP White - tightening 15 mm Per Black - tightening 15 mm Per Clear - tightening 15 mm Per 1000 new 9,5 mm 7 mm For the samples and bindery sets assembly. In metal Métal - tightening 5 mm Per Métal - tightening 10 mm Per Métal - tightening 15 mm Per Métal - tightening 20 mm Per White - tightening 22 mm Per Black - tightening 22 mm Per Clear - tightening 22 mm Per White - tightening 38 mm Per Black - tightening 38 mm Per Clear - tightening 38 mm Per 1000 Removable plastic rivet 6 mm 12 mm 3 mm For the non-permanent assembly of thin posters (max. 3 mm). PP....did you know? Our snap fasteners come in other colours, contact us for details! Plastic bolt 24 mm your signage. These quick and easy bolts can be clipped on for assembly and unscrewed for dismantling. PP. 5 mm 2 mm White - removable - tightening 3 mm Per Black - removable - tightening 3 mm Per 1000 Permanent plastic rivet 12 mm To assemble thin posters (max. 5 mm). Permanent assembly. PP. 7,5 mm 5 mm 5,5 mm White - permanent - tightening 5 mm Per White - Plastic bolt Per Blanc - Longueur 24 mm Per mm 14 mm 5,2 mm your signage. These quick and easy bolts can be clipped on for assembly and unscrewed for dismantling. Crystal PS. 14 mm Christmas tree clip 12 mm cardboard boxes, in just one go. Autoperforating. PP Black - tightening 7 mm Per Clear - tightening 7 mm Per Clear - Length 12 mm Per Black - tightening 14 mm Per Clear - Length Per Clear - tightening 14 mm Per 1000

11 Accessorise your POS 03 Clips & grippers Sitour Merchandising catalog Straps Clear assembly clip Pearlstrap, conical pearl 12 mm For rapid one-sided assembly of display components. PP. 11 mm 4 mm 8,5 mm 3,8 mm Tightening 4 mm Per Tightening 7 mm Per Pearlstraps, conical pearl, 130 mm Per 1000 Strap with notches L-shaped gripper 2,5 mm 180 mm To assemble your posters either at angles 2 mm 20 mm 20 mm 8 mm or in a straight line. Length Max. poster thickness: 2 mm Length 180 mm - Width 2.5 mm Per Length 290 mm - Width 3.6 mm Per L-shaped gripper Per H-shaped gripper Per 100 X-shaped gripper thickness: 2 mm. L 125 Nylon Length 1 - Width 0.5 mm Per ,5 mm Nylon strap for hanging assemblies X-shaped gripper Per mm Assemble posters and create light hanging as-...did you know? Create discreet 3D signage modules rapidly thanks to these assembly grippers! Length 40 mm Per Length 60 mm Per Length 100 mm Per Length 140 mm Per Wire reel Hang your posters in a discrete and modular manner. Max. load: 11.5 Kg. Nylon wire m reel The unit

12 1,5 mm Accessorise your POS 03 Tape Sitour Merchandising catalog Tape Adhesive magnetic tape Double-sided, adhesive, rectangular pads, supplied in a roll. Attach your signage to a metal support base and allow for movement. Suitable for all signage support bases thanks to its adhesive base. Magnetic rubber. tape 30 mm 20 mm Permanently attach your posters to any clean and right surface. Double-sided rectangular white foam pads (20 x 30 mm). Thickness: 1.5 mm. 19 mm Rubber tape 15 mm x 30 m - Density: 80 g/cm 2 The unit Roll of 1000 pads The unit Rubber tape 19 mm x 30 m - Density: 80 g/cm 2 The unit Rubber tape 58 mm x 30 m - Density: 80 g/cm 2 The unit Double-sided, adhesive, circular pads Double-sided adhesive foam tape Permanently attach your posters to any clean and dry surface in a warm environment. Quick polymerisation. Thickness: 0.8 mm. Ø 18 mm Permanently attach your posters to any clean and dry surface in a warm environment. Thickness: 0.8 mm. Product supplied as a sheet of 100 pads. Double sided circular white foam pads (diam. 18 mm) 15 mm Width: 15 mm - Length: 66 m. The unit Sheet of 100 pads, diam. 18 mm. The unit Double sided, adhesive, circular pads - non-permanent Double-sided, adhesive white tape Permanently attach your posters to any clean and dry surface in a warm environment. Quick to use. Thickness: 0.32 mm. Double-sided, 15 mm For non-permanent attachment. Can be removed from any smooth surface without leaving any marks. Double-sided clear non-permanent circular pad (diam. 20 mm). Thickness: 0.48 mm Product supplied as a roll of 1000 pads Roll of 1000 pads The unit Width: 15 m - Length: 50 m. The unit Double-sided, adhesive clear tape Permanently attach your posters to any clean and dry surface in a warm environment. Quick to use. Thickness: 0.21 mm. Double-sided, clear Adhesive velcro pad Attach your signage wherever you prefer. Suitable for all support bases thanks to its adhesive surface. Diam. 19 mm. 15 mm Width: 15 m - Length: 50 m. The unit Roll of 1000 white male pads The unit Roll of 1000 white female pads The unit Adhesive velcro roll 204 Attach your signage wherever you prefer and allow for movement. Suitable for all signage support bases thanks to its adhesive surface. Available in black or white White - Male tape 20 mm x 25 m The unit White - Female tape 20 mm x 25 m The unit Black - Male tape 20 mm x 25 m The unit Black - Female tape 20 mm x 25 m The unit