Catalog # Project. Comments. Prepared by. Finish. Warranty Five-year warranty. 0.5 [14mm] Color Temperature. Number of Circuits

Transcription

1 DESCRIPTION The Minigator WaveStream luminaire merges classic styling with cuttingedge technology to provide quality illumination and superior optical control. Using the WaveStream LED direct/indirect light engine, its wide batwing distribution makes it an excellent choice for lower ceiling applications and areas where ceiling uniformity is important. Stringent building energy requirements are also met effortlessly with five standard output levels and efficacy up to 12 lumens per watt. Available in 4, 8 and 12 sections with a multitude of options, the Minigator WaveStream is well suited for commercial office spaces, schools, libraries and other architectural interiors. Catalog # Project Comments Prepared by Corelite Type Date SPECIFICATION FEATURES Construction Extruded aluminum housing extrusion forming a 6-3/4 x 2-1/2 architectural profile. Modular 4 -, 8 - and 12 - sections combine for continuous runs. End Caps Standard end caps are precision die-cast aluminum, mechanically attached without exposed fasteners. End cap adds 1/2 at each end. Shielding Bottom lens is a high light transmission.8 thick frosted acrylic material. 2.5 [6m] Lengths 6.75 [171mm] Optics Precision formed optical assembly with optical grade acrylic lenses provide an ideal direct/ indirect optical distribution using WaveStream technology. Low voltage WaveStream LED light engine is field-replaceable. Electrical Long-Life LED system coupled with electronic driver to deliver optimal performance. Projected life is 1, hours at 81 lumen output. LEDs are available in 3K, 35K or 4K with a typical CRI 85. Standard drivers are -1 volt.5 [1m] End cap side view continuous dimming that work with any -1V control/dimmer. Or, specify Digital Addressable Lighting Interface (DALI) drivers; for use with Fifth Light controls. See ordering information for details. Mounting Standard aircraft cable mounts on 4 -, 8 - and 12 - centers. Refer to installation instructions for various ceiling interface details. Finish housings are high reflectance white using electrostatically applied polyester powder coat paint. Compliance Components are UL recognized and luminaires are culus listed for 25 C ambient environments, damp location listed, and RoHS compliant. DesignLights Consortium Qualified and classified for DLC Standard, refer to for details. Warranty Five-year warranty. MINIGATOR - MB Frosted Lens WaveStream LED Suspended Direct/Indirect CERTIFICATION DATA culus Damp Location Listed LM79/LM8 Compliant ROHS Compliant DesignLights Consortium Qualified 43.5 [11m] 48" [1219mm] 2.9 [73mm] 96" [2438mm] 144" [3658mm] ORDERING INFORMATION Sample Number: -3L35-1D-UNV-AC48-T1-56-STD-DM5-W Series Optics (per 4 section, 35K) Color Temperature Number of Circuits Wiring Input Voltage Suspension/ Power Feed MB Minigator Suspended WS WaveStream with frosted lens 1 1 (3,19 Lms, 26.1W) 2 2 (3,767 Lms, 35.5W) 3 3 (5,5 Lms, 46.3W) 4 4 (6,19 Lms, 63.7W) 5 5 (7,351 Lms, 79.2W) (11) L3 LED 3K L35 LED 35K L4 LED 4K 1 1 Circuit C Switched Circuit (1) D Dimming (1)(2) B Battery Pack (3) E Emergency Circuit T Nightlight Y Daylight UNV Universal (12V-277V) V (4) AC Aircraft cable with straight power cord Suspension Length Adjustable Cable 48, 12, 24, 3, or 36 Ceiling Type Run Length Driver/Dimming Options T1 1 T-Bar T9 9/16 T-Bar TS Slotted T-Bar ST Structure JB 4 Octagonal J-Box 4 4 ft 8 8 ft ft XX Specify Row Length (5) STD Standard -1V (1-1) HCD -1V (1-1) (7) 5LT Fifth Light DALI (1-1) (6)(8) STP Step Dimming (Bi-Level, 4) (9) SR Sensor Ready (5-1) Integral Sensor (Optional) SV Integrated upancy/ Daylight Sensor for Local Control (1) LWI Lumawatt Pro Wireless Integral Sensor (12) Distribution Modifier Kit (DM Kit) (blank) Std. 65 up / 35 down DM5 5 up / 5 down DM8 8 up / 2 down Nominal distributions. Refer to photometric tests for exact distributions Finish W White S Silver CC Custom Color See page 3 for technical notes PS5247EN 11/2/216 1 of 5

2 Minigator - MB PHOTOMETRICS FILE NAME: -3L35-1D-UNV- 4-STD.IES LAMP: (LD1) LED 35K Angle 45º LUMENS: 55 Lm EFFICACY: 18 Lm/W TEST NO.: P º º º º UP / 35 DOWN FILE NAME: -3L35-1D-UNV- 4-STD-DM5.IES LAMP: (LD1) LED 35K Angle 45º LUMENS: 4681 Lm EFFICACY: 11 Lm/W TEST NO.: P º º º º º UP / 49 DOWN FILE NAME: -3L35-1D-UNV- 4-STD-DM8.IES LAMP: (LD1) LED 35K Angle 45º LUMENS: 4876 Lm EFFICACY: 15 Lm/W TEST NO.: P º º º º º UP / 2 DOWN E. Colfax Avenue Aurora, CO 811 P: PS5247EN 11/2/216 2 of 5

3 Minigator - MB LUMEN MAINTENANCE ENERGY AND PERFORMANCE DATA Ambient Temperature TECHNICAL NOTES TM-21 Lumen Maintenance (1, hours) Theoretical L7 (Hours) 25 C >81 181, 4 MB WaveStream Outputs and Distributions (35K) Series w/ DM5 w/ DM8 Light Level Delivered Wattage Efficacy (LPW) Distribution Up Down Dimming wires come standard in all LED fixtures but can be capped in the field for standard switched operation. 2. When dimming is selected, a separate drop for low voltage control wires supplied as standard. A single drop may be supplied upon request. 3. For approximate delivered lumens, take lumens per watt of desired fixture and multiply by 12 watts (1 lp/w x lumens delivered). 4. Integral 347V electronic driver with STD -1V option only. Two drivers required for 5. Factory supplied remote transformer for all other driver/dimming options. 5. Standard row configurations over 12 consist of 8 and 12 luminaires. 6. Must be used in conjunction with a DALI control system. For a complete listing of Fifth Light Technology products and other solutions from Cooper Controls, visit systems. 7. Two HCD drivers required per 4 section for s 4 and Two Fifth Light (5LT) drivers required per 4 section for Step-dim not available in 1. Two step-dim drivers required per 4 section for SV sensor works only with -1V drivers and is factory prewired to the driver for stand-alone control. Individual fixtures only. Order #ISHH-1 for Programming Remote and #ISHH-2 for Personal Control Remote not available with LWI sensor option. 12. LWI sensor requires use of SR driver. Must be used in conjunction with a LumaWatt Pro control system. For complete LumaWatt Pro wireless solutions, visit E. Colfax Avenue Aurora, CO 811 P: PS5247EN 11/2/216 3 of 5

4 LO SET MIN stored light levels.. INTEGRATED SENSOR Minigator - MB The Minigator with Integrated Sensor technology provides automatic energy savings without sacrificing performance. Traditionally, these types of energy savings required coordination between the luminaire and a lighting control system. The Minigator delivers superior lighting with integrated PIR occupancy sensing and daylighting controls. Capture the benefits of traditional lighting controls, without complicated coverage planning or special wiring. Ideal for new construction or retrofit, the Minigator delivers automatic ON to an energy saving light level, while ensuring lighting is turned OFF when the space is unoccupied. The integral daylight sensors reduce the need for special daylight zone planning. The luminaire will automatically adjust the light level based on reflected light beneath the sensor in a closed loop method. upied daylight light levels and unoccupied light levels can be adjusted using the integrated sensor programming remote (Catalog Number: ISHH-1). The integrated sensor personal remote (Catalog Number: ISHH-2) provides code compliant manual raise, lower, ON, OFF control. The Minigator with Integrated Sensors is easy to install with no special wiring and ensures energy savings out-ofthe-box with default control settings. How it works: When a user enters under an integral sensor, the luminaire controlled by that sensor turns ON to the daylight level (default 5 lux). Lighting will remain at the daylight level until the space is unoccupied. This will start the occupancy timeout period (default 2 minutes). If the space remains unoccupied for half of the timeout period, the lighting will automatically reduce to the Energy Saver light level (default matches occupied daylight level). This adjustable light level is often set to half of the occupied daylight level. At the end of the timeout period the lighting will go to the unoccupied light level. This adjustable light level uses the OFF default setting. 1 Energy Savings Opportunities Timeout Value (ES) Energy Saver (DU) Level upied upied Target light level default: 5 lux at 8 ft. Coverage Coverage Top View C L 3.3m [1 ft.] m [ ft.] Major Motion m [ ft.] m [ ft.] Recommended Mounting Height 8 12 ft. Optional Remote Controls Raise/ Lower Raise/ Lower Time Out SCENE 5 MAX HI 1 75 ES MIN MAX To Set Output Un 1. Raise, Lower or Press Min. 5, 75, Max. 2. To save press SET 3. Select or Un ES To Select Scenes Un Press the SCENE button. The lighting will adjust to Programming Remote ISHH-1 ISHH-1 Programming Remote Personal Remote ISHH-2 ISHH-2 Personal Control Remote 181 E. Colfax Avenue Aurora, CO 811 P: PS5247EN 11/2/216 4 of 5

5 LL51911EN LL5191EN LL5191EN LL5191EN LL5191EN AUTO LUMAWATT PRO SYSTEM Minigator - MB LumaWatt Pro with Enlighted is an integrated system of luminaires, digital sensors, and application-based software for any size project. The strengths of LumaWatt Pro with Enlighted are based on the independent, secure operation of individual sensors in every lighting fixture, combined with wireless communication to the powerful Energy Manager. The system aggregates input from the project to provide visibility to entire aspects of environmental data from the project, putting the input into easy-to-read dashboards of analytic detail. The dashboards enable you to take additional action with the system to improve energy savings, master the use of the space, interact with heating, ventilation, and air-conditioning (HVAC) systems, and report on system modes to reduce maintenance. By collecting granular, real-time data from our state-of-theart integrated sensors to provide advanced, smart building solutions, you are in control. How it works: Luminaires are factory wired to sensors, which provide control based on digital occupancy and daylight dimming as independent, fault-proof, resilient networks of powerful end-points. Sensors communicate to each other, and gateways using easy wireless installation with secure set up. Gateways communicate using industry-standard wired technology to the Energy Manager, for powerful, familiar dashboards of useful information tailored for easy use on a connected computer. Energy Managers connect to cloud-based applications, maximizing the dense, data-rich sensing within the footprint of the luminaire for management of the building environment. 1 Energy Savings Opportunities Energy Manager Software Energy Dashboard Timeout Value (ES) Energy Saver (DU) Level upied upied Coverage, LWI Option Target light level and occupancy time are configurable Space Analysis Application AIRE Integration Application 2.7m [8.5 ft.] 3m [1 ft.] 3m [1 ft.] 1.5m [5 ft.] 1.5m 3m 3.3m [5 ft.] [1 ft.] [11 ft.] 1.65m [5.5 ft.] 1.65m 3.3m [5.5 ft.] [11 ft.] System Configurations LWP-EM-1 Connects up to1 LWP-GW-1 (1, Sensors Maximum) Local Computer or Building LAN Optional System Components Indoor Plug Load Controller LWP-POE8 Connects up to four LWP-GW-1 12V AC Optional System Components DRI-WS-3L35-UNV-22-T1-SR-LWI LWP-PC-1-2 Wall Station 12V AC LWP-GW-1 Connects up to 3 Sensors max. Outdoor CAT5 Cable (33' maximum), 2 per run Optional Components 12V AC GLEON-AE-4-LED-E1-T3-GM-LWR-LN LWP-WS E. Colfax Avenue Aurora, CO 811 P: PS5247EN 11/2/216 5 of 5