Standards for statistical methods, tools and techniques ANNEX A
|
|
- Ralf Newman
- 7 years ago
- Views:
Transcription
1 MSPI 2010 Submitted paper template A1 Standards for statistical methods, tools and techniques ANNEX A 1 BSI Technical Committee SS/1, Statistical Terminology and Symbols 1.1 Scope of SS/1: Technical Committee SS/1 is responsible for the publication and review of British Standards dealing with Statistical terminology & symbols. The committee's Terms of reference are to ensure that the interests of the UK are represented in international standardization activities in the field of application through participation in the work of ISO/TC69/SC1 and its working groups. SS/1 is responsible for nominating and briefing UK experts to attend meetings of ISO/TC69/SC1 and monitoring the work, collating public comment and voting on the documents that they produce. BS ISO :2006 BS ISO :2006 BS ISO :1999 Table A1: British Standards for which SS/1 is responsible Statistics - Vocabulary and symbols - General statistical terms and terms used in probability Statistics - Vocabulary and symbols - Applied statistics Statistics - Vocabulary and symbols - Design of experiments 2 BSI Technical Committee SS/2 - Statistical interpretation of data 2.1 Scope of SS/2: Technical Committee SS/2 is responsible for the publication and review of British Standards dealing with "Statistical interpretation of data". The committee's Terms of Reference are to ensure that the interests of the UK are represented in international standardization activities in the field of application through participation in the work of ISO/TC69/WG3. SS/2 is responsible for nominating and briefing UK experts to ISO/TC69/WG3 and monitoring the work, collating public comment and voting on the documents that they produce. BS :1991 BS :1981 (ISO ) BS :1976 (ISO ) BS :1977 (ISO ) BS :1976 (ISO ) BS :1997 (ISO 5479:1997) Table A2: British Standards for which SS/2 is responsible Guide to statistical interpretation of data. Routine analysis of quantitative data Guide to statistical interpretation of data. Estimation of the mean: confidence interval Guide to statistical interpretation of data. Techniques of estimation and tests relating to means and variances Guide to statistical interpretation of data. Power of tests relating to means and variances Guide to statistical interpretation of data. Comparison of two means in the case of paired observations Guide to statistical interpretation of data. Tests for departure from normality
2 MSPI 2010 Submitted paper template A2 BS :2001 (ISO :2001) BS ISO :2005 BS ISO :2004 Guide to statistical interpretation of data. Median. Estimation and confidence intervals Statistical interpretation of data. Determination of statistical tolerance intervals Statistical interpretation of data. Determination of prediction intervals 3 BSI Technical Committee SS/3, Application of Statistical Methods in Standardization 3.1 Scope of SS/3: Technical Committee SS/3 is responsible for the publication and review of British Standards dealing with the Application of statistical methods in standardization. The committee's Terms of reference are to ensure that the interests of the UK are represented in international standardization activities in the field of application through participation in the work of ISO/TC69 and ISO/TC69/SC6 and their working groups. SS/3 is responsible for nominating and briefing UK experts to attend meetings of ISO/TC69 and ISO/TC69/SC6 and monitoring the work, collating public comment and voting on the documents that they produce. BS 600:2000 BS ISO 10725:2000 BS ISO :2003 BS ISO :2001 Table A3: British Standards for which SS/3 is responsible A guide to the application of statistical methods to quality and standardization Acceptance sampling plans and procedures for the inspection of bulk materials Statistical aspects of sampling from bulk materials - General principles Statistical aspects of sampling from bulk materials - Sampling of particulate materials 4 BSI Technical Committee SS/4 - Statistical Process Management 4.1 Scope of SS/4: Technical Committee SS/4 is responsible for the publication and review of British Standards dealing with "Statistical process management". The committee's Terms of Reference are to ensure that the interests of the UK are represented in international standardization activities in the field of application through participation in the work of ISO/TC69/SC4 and its working groups. SS/4 is responsible for nominating and briefing UK experts to attend meetings of ISO/TC69/SC4 and monitoring the work, collating public comment and voting on the documents that they produce. BS 5700:1984 BS :2003 Table A4: British Standards for which SS/4 is responsible Guide to process control using quality control chart methods and cusum techniques Part 1: Uses and value of attribute charts in business, industry, commerce and public service
3 MSPI 2010 Submitted paper template A3 BS :2003 BS :2003 BS :2003 BS :2001 BS :2008 BS :2008 BS :2003 BS :2003 BS :2003 BS :2003 BS 7783:1994 (ISO 7966:1993) BS 7785:1994 (ISO 8258:1991) BS ISO :2007 BS ISO :2001 BS ISO 21747:2006 BS ISO :2009 BS ISO :2008 PD ISO/TR :2007 Part 2: Fundamentals of standard attribute charting for monitoring, control and improvement Part 3: Technical aspects of attribute charting. Special situation handling Part 4: Attribute inspection performance control and improvement Guide to statistical process control (SPC) charts for variables. Part 1: Charts for mean, median, range and standard deviation Guide to statistical process control (SPC) charts for variables. Part 2: Charts for individual values Guide to statistical process control (SPC) charts for variables. Part 3: Charting techniques for short runs and small mixed batches Guide to data analysis and quality control using cusum techniques. Part 1: Uses and value of cusum charts in business, industry, commerce and public service Guide to data analysis and quality control using cusum techniques. Part 2: Introduction to decision-making using cusum techniques Guide to data analysis and quality control using cusum techniques. Part 3: Cusum methods for process/quality control using measured data Guide to data analysis and quality control using cusum techniques. Part 4: Cusum methods for discrete (count/classified) data Acceptance control charts Shewhart control charts Control charts Part 1: General guidelines Guidelines for implementation of statistical process control (SPC). Part 1: Elements of SPC Statistical methods. Process performance and capability statistics for measured quality characteristics Statistical methods in process management - Capability and performance. Part 1: General principles and concepts Statistical methods in process management - Capability and performance Part 3: Machine performance studies for measured data on discrete parts Statistical methods in process management - Capability and performance. Part 4: Process capability estimates and performance measures
4 MSPI 2010 Submitted paper template A4 5 BSI Technical Committee SS/5, Acceptance Sampling Schemes 5.1 Scope of SS/5: Technical Committee SS/5 is responsible for the publication and review of British Standards dealing with "Acceptance sampling schemes" for both attributes and variables. The committee's Terms of reference are to ensure that the interests of the UK are represented in international standardization activities in the field of application through participation in the work of ISO/TC69/SC5 and its working groups. SS/5 is responsible for nominating and briefing UK experts to attend meetings of ISO/TC69/SC5 and monitoring the work, collating public comment and voting on the documents that they produce. BS :2005 BS :2005 BS :2005 BS :2006 (ISO :2006) BS :1999 (ISO :1999) BS :1993 (ISO :1985) BS :2005 BS :2005 (ISO :2005) BS :2002 BS :2006 (ISO 18414:2006) BS :2002 BS :2007 BS :2007 BS :2005 Table A5: British Standards for which SS/5 is responsible Guide to the selection and usage of acceptance sampling systems for inspection of discrete items in lots Part 1: General guide to acceptance sampling Guide to the selection and usage of acceptance sampling systems for inspection of discrete items in lots Part 2: Guide to sampling by attributes Guide to the selection and usage of acceptance sampling systems for inspection of discrete items in lots Part 3: Guide to sampling by variables Sampling procedures for inspection by attributes Part 0: Introduction to the BS 6001 (ISO 2859) series of standards for sampling for inspection by attributes Sampling procedures for inspection by attributes Part 1: Sampling schemes indexed by acceptance quality limit (AQL) for lot-by-lot inspection Sampling procedures for inspection by attributes Part 2: Specification for sampling plans indexed by limiting quality (LQ) for isolated lot inspection Sampling procedures for inspection by attributes Part 3: Specification for skip-lot sampling procedures Sampling procedures for inspection by attributes Part 4: System of sequential sampling plans indexed by acceptance quality limit (AQL) for lot-by-lot inspection Sampling procedures for inspection by attributes Part 5: Procedures for assessment of declared quality levels Acceptance sampling procedures for inspection by attributes Part 7: Accept-zero sampling system based on credit principle for controlling outgoing quality Sampling procedures for inspection by attributes Part 9: Double sampling plans using minimal sample sizes, indexed by producer's risk quality (PRQ) and consumer's risk quality (CRQ) Sampling procedures for inspection by variables Part 1: Guide to single sampling plans indexed by acceptance quality limit (AQL) for lot-by-lot inspection for a single quality characteristic and a single AQL Sampling procedures for inspection by variables Part 2: General guide to single sampling plans indexed by acceptance quality limit (AQL) for lot-by-lot inspection of independent quality characteristics Sampling procedures for inspection by variables Part 3: Guide to double sampling schemes indexed by acceptance quality limit (AQL) for lot-by-lot inspection
5 MSPI 2010 Submitted paper template A5 BS :2006 (ISO :2006) BS ISO 8422:2006 BS ISO 8423:2008 BS ISO :2005 BS ISO :2004 BS ISO 14560:2004 BS ISO 21247:2005 BS ISO 24153:2009 Sampling procedures for inspection by variables Part 4: Sequential sampling plans indexed by acceptance quality limit (AQL) for inspection by variables (known standard deviation) Sequential sampling plans for inspection by attributes Sequential sampling plans for inspection by variables for percent nonconforming (known standard deviation) Acceptance sampling procedures based on the allocation of priorities principle (APP) Part 1: Guidelines for the APP approach Acceptance sampling procedures based on the allocation of priorities principles (APP) Part 2: Coordinated single sampling plans for acceptance sampling by attributes Acceptance sampling procedures by attributes. Specified quality levels in nonconforming items per million Combined accept-zero sampling systems and process control procedures for product acceptance Random sampling and randomization procedures 6 BSI Technical Committee SS/6, Precision of Test Methods 6.1 Scope of SS/6: Technical Committee SS/6 is responsible for the publication and review of British Standards dealing with the "Precision of test methods" The committee's Terms of Reference are to ensure that the interests of the UK are represented in international standardization activities in the field of application through participation in the work of ISO/TC69/SC6 and its working groups. SS/6 is responsible for nominating and briefing UK experts to attend meetings of ISO/TC69/SC6 and monitoring the work, collating public comment and voting on the documents that they produce. SS/6 is also responsible for contributing to the work of ISO/TAG 4 and JCGM. BS ISO :1994 BS ISO :1994 BS ISO :1994 BS ISO :1994 BS ISO :1998 Table A6: British Standards for which SS/6 is responsible Accuracy (trueness and precision) of measurement methods and results Part 1: General principles and definitions Accuracy (trueness and precision) of measurement methods and results Part 2: Basic methods for the determination of repeatability and reproducibility of a standard measurement method Accuracy (trueness and precision) of measurement methods and results Part 3: Intermediate measures of the precision of a standard measurement method Accuracy (trueness and precision) of measurement methods and results Part 4: Basic methods for the determination of the trueness of a standard measurement method Accuracy (trueness and precision) of measurement methods and results Part 5: Alternative methods for the determination of the precision of a standard measurement method
6 MSPI 2010 Submitted paper template A6 PD :2004 BS ISO 11095:1996 BS ISO :1997 BS ISO :2000 BS ISO :2003 BS ISO :2003 BS ISO :2008 BS ISO 13528:2005 BS ISO :1994 DD ISO/TS 21748:2004 DD ISO/TS 21749:2005 PD ISO/TR 22971:2005 General metrology. Practical guide to measurement uncertainty Linear calibration using reference materials Capability of detection Part 1: Terms and definitions Capability of detection Part 2: Methodology in the linear calibration case Capability of detection Part 3: Methodology for determination of the critical value for the response variable when no calibration data are used Capability of detection Part 4: Methodology for comparing the minimum detectable value with a given value Capability of detection Part 5: Methodology in the linear and non-linear calibration cases Statistical methods for use in proficiency testing by interlaboratory comparisons Accuracy (trueness and precision) of measurement methods and results Part 6: Use in practice of accuracy values Guidance for the use of repeatability, reproducibility and trueness estimates in measurement uncertainty estimation Measurement and uncertainty for metrological applications. Repeated measurements and nested experiments Accuracy (trueness and precision) of measurement methods and results. Practical guidance for the use of ISO :1994 in designing, implementing and statistically analysing interlaboratory repeatability and reproducibility results 7 BSI Technical Committee MS/6, Methodologies for business process improvement using statistical methods 7.1 Scope of MS/6: Technical Committee MS/6 is responsible for the publication and review of British Standards for "systematic improvement of business processes by the application of statistical analysis and related optimization methods". The committee's Terms of Reference are to ensure that the collective interests of UK business organizations are represented in international and Europeans standardization projects on this subject. In particular, MS/6 is responsible for monitoring the work of ISO/TC69/SC7, ISO/TC69/SC8 and other relevant ISO/TC69 Sub- Committees, plus their working groups, collating public comment, and voting, on documents prepared by the committee. MS/6 is responsible for nominating and briefing UK experts to attend meetings of ISO/TC69/SC7 and ISO/TC69/SC 8, plus their working groups. Table A7: British Standards for which MS/6 is responsible PD ISO/TR 29901:2007 Selected illustrations of full factorial experiments with four factors
Validation and Calibration. Definitions and Terminology
Validation and Calibration Definitions and Terminology ACCEPTANCE CRITERIA: The specifications and acceptance/rejection criteria, such as acceptable quality level and unacceptable quality level, with an
More informationAmerican Association for Laboratory Accreditation
Page 1 of 12 The examples provided are intended to demonstrate ways to implement the A2LA policies for the estimation of measurement uncertainty for methods that use counting for determining the number
More informationIAS CALIBRATION and TESTING LABORATORY ACCREDITATION PROGRAMS DEFINITIONS
REFERENCES NIST Special Publication 330 IAS CALIBRATION and TESTING LABORATORY ACCREDITATION PROGRAMS DEFINITIONS Revised October 2013 International vocabulary of metrology Basic and general concepts and
More informationThe Determination of Uncertainties in Charpy Impact Testing
Manual of Codes of Practice for the Determination of Uncertainties in Mechanical Tests on Metallic Materials Code of Practice No. 06 The Determination of Uncertainties in Charpy Impact Testing M.A. Lont
More informationNew OIML Document Surveillance of utility meters in service based on sampling inspections
COMMITTEE DRAFT OIML CD3 Date: 13 July 2010 Reference number: CD3 Supersedes document: CD2 (2006.02.16) OIML TC 3/SC 4 Circulated to P- and O-members and liaison international bodies and external organisations
More informationWhat Are the Differences?
Comparison between the MSA manual and VDA Volume 5 What Are the Differences? MSA is short for Measurement Systems Analysis. This document was first published by the Automotive Industry Action Group (AIAG)
More information18.6.1 Terms concerned with internal quality control procedures
18.6.1 Terms concerned with internal quality control procedures Quality assurance in analytical laboratories Quality assurance is the essential organisational infrastructure that underlies all reliable
More informationCHAPTER 1 THE CERTIFIED QUALITY ENGINEER EXAM. 1.0 The Exam. 2.0 Suggestions for Study. 3.0 CQE Examination Content. Where shall I begin your majesty?
QReview 1 CHAPTER 1 THE CERTIFIED QUALITY ENGINEER EXAM 1.0 The Exam 2.0 Suggestions for Study 3.0 CQE Examination Content Where shall I begin your majesty? The White Rabbit Begin at the beginning, and
More informationLAB 37 Edition 3 June 2013
LAB 37 Edition 3 June 2013 Accreditation Requirements for Sampling and Testing in Accordance with the Drinking Water Testing Specification (DWTS) CONTENTS SECTION PAGE 1 Introduction 2 2 Regulatory requirements
More informationG104 - Guide for Estimation of Measurement Uncertainty In Testing. December 2014
Page 1 of 31 G104 - Guide for Estimation of Measurement Uncertainty In Testing December 2014 2014 by A2LA All rights reserved. No part of this document may be reproduced in any form or by any means without
More informationMethods verification. Transfer of validated methods into laboratories working routine. Dr. Manuela Schulze 1
Methods verification Transfer of validated methods into laboratories working routine Dr. Manuela Schulze 1 1. Introduction 2. Definitions and differences validation verification 3. How to perform verification
More informationInformation for Schools and Colleges. So you want to. Know more about the BS EN ISO 9000:2000 family of quality management system standards
Information for Schools and Colleges So you want to Know more about the BS EN ISO 9000:2000 family of quality management system standards A brief history of BS EN ISO 9000:2000 From the 1920 s to the 1940
More informationQUALITY MANAGEMENT IN VETERINARY TESTING LABORATORIES
NB: Version adopted by the World Assembly of Delegates of the OIE in May 2012 CHAPTER 1.1.4. QUALITY MANAGEMENT IN VETERINARY TESTING LABORATORIES SUMMARY Valid laboratory results are essential for diagnosis,
More informationNorthumberland Knowledge
Northumberland Knowledge Know Guide How to Analyse Data - November 2012 - This page has been left blank 2 About this guide The Know Guides are a suite of documents that provide useful information about
More informationCERTIFIED QUALITY ENGINEER (CQE) BODY OF KNOWLEDGE
CERTIFIED QUALITY ENGINEER (CQE) BODY OF KNOWLEDGE The topics in this Body of Knowledge include subtext explanations and the cognitive level at which the questions will be written. This information will
More informationDRAFT SAINT LUCIA NATIONAL STANDARD DNS/ISO 9001 QUALITY MANAGEMENT SYSTEMS REQUIREMENTS [ISO 9001: 2015, IDT]
DRAFT SAINT LUCIA NATIONAL STANDARD DNS/ISO 9001 QUALITY MANAGEMENT SYSTEMS REQUIREMENTS [ISO 9001: 2015, IDT] Copyright SLBS Saint Lucia Bureau of Standards, 2015 No part of this standard may be reproduced
More informationISO 9000 Introduction and Support Package: Guidance on the Documentation Requirements of ISO 9001:2008
Document: ISO/TC 176/SC 2/N 525R2 ISO 9000 Introduction and Support Package: 1 Introduction Two of the most important objectives in the revision of the ISO 9000 series of standards have been a) to develop
More informationMeasurement Systems Correlation MSC for Suppliers
Measurement Systems Correlation MSC for Suppliers Copyright 2003-2007 Raytheon Company. All rights reserved. R6σ is a Raytheon trademark registered in the United States and Europe. Raytheon Six Sigma is
More informationGeneral and statistical principles for certification of RM ISO Guide 35 and Guide 34
General and statistical principles for certification of RM ISO Guide 35 and Guide 34 / REDELAC International Seminar on RM / PT 17 November 2010 Dan Tholen,, M.S. Topics Role of reference materials in
More informationCERTIFIED QUALITY ENGINEER (CQE) BODY OF KNOWLEDGE
CERTIFIED QUALITY ENGINEER (CQE) BODY OF KNOWLEDGE The topics in this Body of Knowledge include subtext explanations and the cognitive level at which the questions will be written. This information will
More informationRevision Date Author Description of change. 10 07Jun13 Mark Benton Removed Admin. Manager from approval
Page 2 of 15 Document Revision History Revision Date Author Description of change 10 07Jun13 Mark Benton Removed Admin. Manager from approval 12Feb13 Mark Benton 08 01Oct12 Mark Benton 07 8/30/2012 Refer
More informationSTATISTICAL QUALITY CONTROL (SQC)
Statistical Quality Control 1 SQC consists of two major areas: STATISTICAL QUALITY CONTOL (SQC) - Acceptance Sampling - Process Control or Control Charts Both of these statistical techniques may be applied
More informationAnalytical Test Method Validation Report Template
Analytical Test Method Validation Report Template 1. Purpose The purpose of this Validation Summary Report is to summarize the finding of the validation of test method Determination of, following Validation
More informationMethods of sampling and analysis
Methods of sampling and analysis SECTION 5 Section 5 - Methods of sampling and analysis Sampling Sampling protocols should meet scientifically recognized principles and procedures Analysis Laboratory methods
More informationNABL NATIONAL ACCREDITATION
NABL 160 NABL NATIONAL ACCREDITATION BOARD FOR TESTING AND CALIBRATION LABORATORIES GUIDE for PREPARING A QUALITY MANUAL ISSUE NO. : 05 AMENDMENT NO : 00 ISSUE DATE: 27.06.2012 AMENDMENT DATE: -- Amendment
More informationConfidence Intervals for One Standard Deviation Using Standard Deviation
Chapter 640 Confidence Intervals for One Standard Deviation Using Standard Deviation Introduction This routine calculates the sample size necessary to achieve a specified interval width or distance from
More informationGap Analysis of ISO 15189:2012 and ISO 15189:2007 in the field of Medical Testing
Gap Analysis May 2013 Issued: May 2013 Gap Analysis of and in the field of Medical Testing Copyright National Association of Testing Authorities, Australia 2013 This publication is protected by copyright
More informationFor the latest information on VHP publications, visit our website: www.vanharen.net.
Other publications by Van Haren Publishing on IT Management Van Haren Publishing specialises in titles on Best Practices, methods and standards within IT and business management. These publications are
More informationCertified Quality Engineer
Certified Quality Engineer Quality excellence to enhance your career and boost your organization s bottom line asqmena.org/certification.php www.asqmena.org Certification from ASQ is considered a mark
More informationQuality Management System Policy Manual
Quality Management System Burns Engineering, Inc. 10201 Bren Road East Minnetonka, MN 55343 4. 4.1 General Requirements The Quality Manual consists of the quality system policy documents and the quality
More informationProcedures and General Requirements
NIST HB 150-2016 National Voluntary Laboratory Accreditation Program Procedures and General Requirements Warren R. Merkel Vanda R. White This publication is available free of charge from: http://dx.doi.org/10.6028/nist.hb.150-2016
More informationGuide to Method Validation for Quantitative Analysis in Chemical Testing Laboratories
Guide to Method Validation for Quantitative Analysis in Chemical Testing Laboratories Wilton Park House, Wilton Place, Dublin 2, Ireland Tel +353 1 607 3003 Fax +353 1 607 3109 E-mail inab@inab.ie Web
More informationISO/IEC 27001:2013 webinar
ISO/IEC 27001:2013 webinar 11 June 2014 Dr. Mike Nash Gamma Secure Systems Limited UK Head of Delegation, ISO/IEC JTC 1/SC 27 Introducing ISO/IEC 27001:2013 and ISO/IEC 27002:2013 New versions of the Information
More informationCalibration Certificate
P.O. Box 87-0087 Phone:856-686-1600 Fax:856-686-1601 www.troemner.com e-mail: troemner@troemner.com SECTION 1: Page 1 of 7 Pages SECTION 2: APPROVED SIGNATORY Joseph Moran SECTION 3: PERSON PERFORMING
More informationStatistical Rules of Thumb
Statistical Rules of Thumb Second Edition Gerald van Belle University of Washington Department of Biostatistics and Department of Environmental and Occupational Health Sciences Seattle, WA WILEY AJOHN
More informationNIST HANDBOOK 150-5 CHECKLIST CONSTRUCTION MATERIALS TESTING
NIST HANDBOOK 150-5 CHECKLIST CONSTRUCTION MATERIALS TESTING Instructions to the Assessor: This checklist addresses specific accreditation criteria prescribed in NIST Handbook 150-5, Construction Materials
More informationConcept for an Algorithm Testing and Evaluation Program at NIST
Concept for an Algorithm Testing and Evaluation Program at NIST 1 Introduction Cathleen Diaz Factory Automation Systems Division National Institute of Standards and Technology Gaithersburg, MD 20899 A
More informationASSURING THE QUALITY OF TEST RESULTS
Page 1 of 12 Sections Included in this Document and Change History 1. Purpose 2. Scope 3. Responsibilities 4. Background 5. References 6. Procedure/(6. B changed Division of Field Science and DFS to Office
More informationOffice for Nuclear Regulation
ONR GUIDE LC17 Management Systems Document Type: ONR Nuclear Safety Technical Inspection Guide Unique Document ID and Revision No: NS-INSP-GD-017 Revision 2 Date Issued: November 2012 Review Date: November
More informationCheck-list for auditors. Audit visit at candidate registered laboratories
Check-list for auditors Audit visit at candidate registered laboratories 1 Contents Introduction Laboratory documentation required by the standard(s), available for inspection by the auditor Items to be
More informationEuropean cooperation for EAL-G23 THE EXPRESSION OF UNCERTAINTY IN QUANTITATIVE TESTING. The Expression of Uncertainty in Quantitative Testing
European cooperation for EAL-G23 THE EXPRESSION OF UNCERTAINTY IN QUANTITATIVE TESTING Accreditation of Laboratories Publication Reference EAL-G23 The Expression of Uncertainty in Quantitative Testing
More informationTransilvania University of Braşov, Romania Study program : Quality Management
Transilvania University of Braşov, Romania Study program : Quality Management Faculty Technological Engineering and Industrial Management Study program (Curriculum) Study period 2 years (master) Academic
More informationEffiValidation 3.0 software basic training module
EffiValidation 3.0 software basic training module Oct 3, 2012 www.effichem.com Agenda EffiChem company EffiValidation 3.0 software : overview International standards and guidelines Software features Structure
More informationSelection and use of ISO 9000
Selection and use of ISO 9000 ISO in brief ISO is the International Organization for Standardization. It is made up of national standards institutes from countries large and small, industrialized and developing,
More informationUnit 1: Introduction to Quality Management
Unit 1: Introduction to Quality Management Definition & Dimensions of Quality Quality Control vs Quality Assurance Small-Q vs Big-Q & Evolution of Quality Movement Total Quality Management (TQM) & its
More informationNABL NATIONAL ACCREDITATION
NABL 162 NABL NATIONAL ACCREDITATION BOARD FOR TESTING AND CALIBRATION LABORATORIES GUIDELINES FOR PROFICIENCY TESTING PROGRAM for TESTING AND CALIBRATION LABORATORIES ISSUE NO : 04 AMENDMENT NO : 00 ISSUE
More informationWelcome! Frank Teleso. Quality Manager
Welcome! We appreciate your interest in Excelsior s Quality Management System. The objective of this document is to provide a quick method for you to do a preliminary quality qualification of Excelsior
More informationValidation of measurement procedures
Validation of measurement procedures R. Haeckel and I.Püntmann Zentralkrankenhaus Bremen The new ISO standard 15189 which has already been accepted by most nations will soon become the basis for accreditation
More informationIndustry use of Standards and how PPM fits with those Standards
Industry use of Standards and how PPM fits with those Standards Wolfgang Kresse EuroSDR, ISO/TC 211 Germany kresse @hs-nb.de 1 What is the legal status of a standard? ISO International Organization for
More informationMANAGEMENT REVIEW FOR LABORATORIES AND INSPECTION BODIES
APLAC TC 003 MANAGEMENT REVIEW FOR LABORATORIES AND INSPECTION BODIES Issue No. 4 Issue Date: 09/10 Page 1 of 7 PURPOSE This document gives laboratories and inspection bodies guidance on how to establish
More informationDECISION LIMITS FOR THE CONFIRMATORY QUANTIFICATION OF THRESHOLD SUBSTANCES
DECISION LIMITS FOR THE CONFIRMATORY QUANTIFICATION OF THRESHOLD SUBSTANCES Introduction This Technical Document shall be applied to the quantitative determination of a Threshold Substance in a Sample
More informationCRITERIA FOR PERFORMING CALIBRATION AND INTERMEDIATE CHECKS ON EQUIPMENT USED IN ACCREDITED FACILITIES
CRITERIA FOR PERFORMING CALIBRATION AND INTERMEDIATE CHECKS ON EQUIPMENT USED IN ACCREDITED FACILITIES Prepared by: Technical Manager Approved by: Chief Executive Officer Approval Date: 2013-04-24 Effective
More informationSelection, Use and Interpretation of Proficiency Testing (PT) Schemes
Selection, Use and Interpretation of Proficiency Testing (PT)Schemes es Second Ed dition 2011 Selection, Use and Interpretation of Proficiency Testing (PT) Schemes Second Edition 2011 Editors Ian Mann
More informationQDA Q-Management A S I D A T A M Y T E S P E C S H E E T. From stand-alone applications to integrated solutions. Process optimization tool
QDA Q-Management Q-Management is the powerful base software package within ASI DATAMYTE s QDA suite that facilitates achievement and verification of quality goals such as process control, cost reduction,
More informationOMCL Network of the Council of Europe QUALITY MANAGEMENT DOCUMENT
OMCL Network of the Council of Europe QUALITY MANAGEMENT DOCUMENT PA/PH/OMCL (12) 77 7R QUALIFICATION OF EQUIPMENT ANNEX 8: QUALIFICATION OF BALANCES Full document title and reference Document type Qualification
More informationSPECIFICATIONS AND CONTROL TESTS ON THE FINISHED PRODUCT
SPECIFICATIONS AND CONTROL TESTS ON THE FINISHED PRODUCT Guideline Title Specifications and Control Tests on the Finished Product Legislative basis Directive 75/318/EEC as amended Date of first adoption
More informationAmerican Association for Laboratory Accreditation
Page 1 of 15 R104 GENERAL REQUIREMENTS: ACCREDITATION OF FIELD TESTING AND FIELD CALIBRATION LABORATORIES July 2015 2015 by A2LA All rights reserved. No part of this document may be reproduced in any form
More informationChapter 1 Modern Quality Management and Improvement. Statistical Quality Control (D. C. Montgomery)
Chapter 1 Modern Quality Management and Improvement 許 湘 伶 Statistical Quality Control (D. C. Montgomery) Quality Control I 工 業 革 命 工 廠 量 產 市 場 競 爭 提 升 : 產 品 工 作 及 服 務 之 品 質 科 技 發 展 企 業 利 潤 品 質 Quality
More informationISO 22301:2012 Societal Security Appendix B Business Continuity Management Systems Requirements 347
Appendix B Business Continuity Management Systems Requirements 347 B.3 Format and Structure ISO 22301 is the second published standard to adopt ISO s new high-level structure for management systems standards
More informationExplanatory Note The relationship between PD 0008 & ISO/TR 15801
Explanatory Note The relationship between PD 0008 & ISO/TR 15801 ISO/TR 15801 Electronic Imaging - information stored electronically - recommendations for trustworthiness & reliability PD 0008 Code of
More informationBusiness Statistics. Successful completion of Introductory and/or Intermediate Algebra courses is recommended before taking Business Statistics.
Business Course Text Bowerman, Bruce L., Richard T. O'Connell, J. B. Orris, and Dawn C. Porter. Essentials of Business, 2nd edition, McGraw-Hill/Irwin, 2008, ISBN: 978-0-07-331988-9. Required Computing
More informationWelding coordination Tasks and responsibilities
BRITISH STANDARD BS EN ISO 14731:2006 Welding coordination Tasks and responsibilities The European Standard EN ISO 14731:2006 has the status of a British Standard ICS 25.160.01 BS EN ISO 14731:2006 National
More informationINFLUENCE OF MEASUREMENT SYSTEM QUALITY ON THE EVALUATION OF PROCESS CAPABILITY INDICES
METALLURGY AND FOUNDRY ENGINEERING Vol. 38, 2012, No. 1 http://dx.doi.org/10.7494/mafe.2012.38.1.25 Andrzej Czarski*, Piotr Matusiewicz* INFLUENCE OF MEASUREMENT SYSTEM QUALITY ON THE EVALUATION OF PROCESS
More informationQuality Assurance of test results using the techniques of statistical quality control According to ISO/IEC 17025:2005
Global Advanced Research Journal of Engineering, Technology and Innovation (ISSN: 2315-5124) Vol. 2(10) pp. 284-294, November, 2013 Available online http://garj.org/garjeti/index.htm Copyright 2013 Global
More informationISO 9000 Series Standards. ISO 10000 Series Standards. Other Supporting Documents
Current Standards & Future Development: ISO 9000 Series Standards ISO 10000 Series Standards Other Supporting Documents The ISO 9000 family of standards includes: 16 published standards Internet based
More informationISO 17025 and SANAS guidelines for use of reference materials and PT scheme participation Shadrack Phophi
ISO 17025 and SANAS guidelines for use of reference materials and PT scheme participation Shadrack Phophi The Innovation Hub, Pretoria Presentation layout 1. Introduction ISO/IEC 17025 2. Requirements
More informationDEC STD 017-2 - ISO 9002 - Quality Systems - Model for Quality Assurance in Production and Installation
Digital Internal Use Only DEC STD 017-2 - ISO 9002 - Quality Systems - Model for Quality Assurance in Production and Installation DOCUMENT IDENTIFIER: A-DS-EL00017-02-0000 Rev A, ABSTRACT: This standard
More informationChapter 1: The Nature of Probability and Statistics
Chapter 1: The Nature of Probability and Statistics Learning Objectives Upon successful completion of Chapter 1, you will have applicable knowledge of the following concepts: Statistics: An Overview and
More informationQUALITY ASSURANCE and QUALITY CONTROL DATA STANDARD
QUALITY ASSURANCE and QUALITY CONTROL DATA STANDARD Standard No.: EX000012.1 January 6, 2006 This standard has been produced through the Environmental Data Standards Council (EDSC). The Environmental Data
More informationAnalytical Methods: A Statistical Perspective on the ICH Q2A and Q2B Guidelines for Validation of Analytical Methods
Page 1 of 6 Analytical Methods: A Statistical Perspective on the ICH Q2A and Q2B Guidelines for Validation of Analytical Methods Dec 1, 2006 By: Steven Walfish BioPharm International ABSTRACT Vagueness
More informationCopyright 2010-2012 PEOPLECERT Int. Ltd and IASSC
PEOPLECERT - Personnel Certification Body 3 Korai st., 105 64 Athens, Greece, Tel.: +30 210 372 9100, Fax: +30 210 372 9101, e-mail: info@peoplecert.org, www.peoplecert.org Copyright 2010-2012 PEOPLECERT
More informationVolume 22 Number 22. C43-A ISBN 1-56238-475-9 ISSN 0273-3099 Gas Chromatography/Mass Spectrometry (GC/MS) Confirmation of Drugs; Approved Guideline
ISBN 1-56238-475-9 ISSN 0273-3099 Gas Chromatography/Mass Spectrometry (GC/MS) Confirmation of Drugs; Approved Guideline Volume 22 Number 22 Larry D. Bowers, Ph.D., DABCC, Chairholder David A. Armbruster,
More informationAUDIT PROTOCOL FOR THE VICTORIAN WATER QUALITY MONITORING NETWORK
AUDIT PROTOCOL FOR THE VICTORIAN WATER QUALITY MONITORING NETWORK ENVIRONMENT PROTECTION AUTHORITY June 1999 AUDIT PROTOCOL FOR THE VICTORIAN WATER QUALITY MONITORING NETWORK, June 1999 David Robinson
More informationSUPPLIER QUALITY SELF AUDIT & QUESTIONNAIRE FORM
Fuji Autotech USA, LLC Walton, KY 41094 DATE: SUPPLIER QUALITY SELF AUDIT & QUESTIONNAIRE FORM DUNS# Supplier Name Complete Mailing Address Complete Shipping Address (if different then mailing address)
More informationCMMs and PROFICIENCY TESTING
CMMs and PROFICIENCY TESTING Speaker/Author: Dr. Henrik S. Nielsen HN Metrology Consulting, Inc. HN Proficiency Testing, Inc. Indianapolis, Indiana, USA hsnielsen@hn-metrology.com Phone: (317) 849 9577;
More informationUse of control charts in the production of concrete
by Ian Gibb and Tom Harrison October 2010 Amendments Date Amendments August 2011 Clause references corrected in 4.4 Text expanded in 5.4,3 rd paragraph Correction to cement content in 11.6, 3 rd paragraph
More informationQuantifying Uncertainty in Analytical Measurement
EURACHEM / CITAC Guide Quantifying Uncertainty in Analytical Measurement Second Edition QUAM:000.P1 EURACHEM/CITAC Guide Quantifying Uncertainty in Analytical Measurement Second Edition Editors S L R Ellison
More informationCourse Text. Required Computing Software. Course Description. Course Objectives. StraighterLine. Business Statistics
Course Text Business Statistics Lind, Douglas A., Marchal, William A. and Samuel A. Wathen. Basic Statistics for Business and Economics, 7th edition, McGraw-Hill/Irwin, 2010, ISBN: 9780077384470 [This
More informationGENERAL REQUIREMENTS FOR THE PROGRAMME OF REFERENCE MATERIAL CERTIFICATION IN SERIAL PRODUCTION
International Document OIML 1 st CD GENERAL REQUIREMENTS FOR THE PROGRAMME OF REFERENCE MATERIAL CERTIFICATION IN SERIAL PRODUCTION International Organization of Legal Metrology Contents 01 Scope 2 12
More informationGuidelines on the Reporting of Compliance with Specification
Guidelines on the Reporting of Compliance with Specification ILAC-G8:03/2009 Copyright ILAC 2009 ILAC encourages the authorized reproduction of this publication, or parts thereof, by organisations wishing
More informationPROBABILITY AND STATISTICS Vol. III - Sample Method and Quality Control - B.F. Arnold and R. Göb
SAMPLE METHOD AND QUALITY CONTROL B.F. Arnold Institute for Statistics and Econometrics, University of Hamburg, Germany R. Göb Institute for Applied Mathematics and Statistics, University of Würzburg,
More informationQuality Assurance Manual January 2008 Revision I Revision date of 01/17/13. Pi Tape Corporation. 344 North Vinewood St. Escondido CA 92029-1337 USA
Quality Assurance Manual January 2008 Revision I Revision date of 01/17/13 Pi Tape Corporation 344 North Vinewood St. Escondido CA 92029-1337 USA Phone # 760 746-9830 Fax # 760 746-9196 In conformance
More informationIAEA-TECDOC-1350. Development and use of reference materials and quality control materials
IAEA-TECDOC-1350 Development and use of reference materials and quality control materials April 2003 The originating Section of this publication in the IAEA was: Industrial Applications and Chemistry Section
More informationNIST HANDBOOK 150 CHECKLIST
NIST HANDBOOK 150 CHECKLIST Instructions to the Assessor: This checklist addresses the general accreditation criteria prescribed in NIST Handbook 150, NVLAP Procedures and General Requirements (2006 edition).
More informationSAMPLE. Verification of Comparability of Patient Results Within One Health Care System; Approved Guideline (Interim Revision)
August 2012 Verification of Comparability of Patient Results Within One Health Care System; Approved Guideline (Interim Revision) This document provides guidance on how to verify comparability of quantitative
More informationState Meat and Poultry Inspection (MPI) Program Laboratory Quality Management System Checklist
This checklist is intended to help laboratories improve the quality of their testing programs with regard to meat and poultry testing samples, in order to ensure those laboratories are at least equal to
More informationAPPENDIX N. Data Validation Using Data Descriptors
APPENDIX N Data Validation Using Data Descriptors Data validation is often defined by six data descriptors: 1) reports to decision maker 2) documentation 3) data sources 4) analytical method and detection
More informationSupplier Quality Assurance
Supplier Quality Assurance Preface We strive to continually improve our process performance by meeting quality objectives. It is imperative that our suppliers operate under the zero defects and 100% on
More informationQUALITY MANUAL ISO 9001. Quality Management System
Page 1 of 20 QUALITY MANUAL ISO 9001 Quality Management System Printed copies are not controlled unless marked "CONTROLLED". Upon receipt of this document, discard all previous copies. Page 2 of 20 Approval
More informationISO 17025. How to Meet. Requirements for Method Verification. Prepared by:
How to Meet ISO 17025 Requirements for Method Verification Prepared by: AOAC INTERNATIONAL 481 N. Frederick Ave, Suite 500 Gaithersburg, MD 20877, USA www.aoac.org The Scientific Association Dedicated
More informationThe contents of OHSAS 18001 are listed below, followed by brief notes on each of the main subheadings.
An Overview of OSHAS 18001 Overview of OSHAS 18001 The contents of OHSAS 18001 are listed below, followed by brief notes on each of the main subheadings. 1 Scope 2 Reference publications 3 Terms and definitions
More informationTechnical Product Specification (TPS)
ISO Standards collection Technical Product Specification (TPS) Contents ISO 1:2002 Geometrical Product Specifications (GPS) -- Standard reference temperature for geometrical product specification and verification
More informationProcedure for Writing Technical Procedures
Procedure for Writing Technical Procedures 1.0 Purpose This procedure specifies when a technical procedure is needed and outlines the required elements for writing the technical procedure. 2.0 Scope This
More informationThe new ISO standard 17123-8 for checking GNSS field measuring systems
The new ISO standard 1713-8 for checking GNSS field measuring systems Hans Heister Institute for Geodesy - Geodetic Metrology - UniBw München D-85577 Neubiberg h.heister@unibw.de FIG Working Week - Stockholm
More informationGENERAL GUIDELINES ON SAMPLING CAC/GL 50-2004 TABLE OF CONTENTS
CAC/GL 5-24 Page 1 of 69 GENERAL GUIDELINES ON SAMPLING CAC/GL 5-24 TABLE OF CONTENTS TABLE OF CONTENTS... 1 PREAMBLE... 3 SECTION I. PURPOSE OF CODEX GUIDELINES ON SAMPLING... 5 1.1 PURPOSE... 5 1.2 TARGET
More informationContents. 1 Introduction of RIAMB and SAC/TC159. 2 Automation System Integration Framework
Standardization for Automation System Integration SAC/TC159 Contents 1 Introduction of RIAMB and SAC/TC159 2 Automation System Integration Framework 3 Standards in the Area Contents 1 Introduction of RIAMB
More information