Physo Terminal Devices
|
|
- Amberlynn Lindsey
- 7 years ago
- Views:
Transcription
1 Physo Physo The Physo segment includes the passive arm prosthesis consisting of the inner hand, the prosthetic glove, the respective wrist connection and the individual socket integration. In contrast to the Myo and Movo (active function), the focus here is on a natural look and restoring the outer appearance. A large selection for infants, toddlers, children, women and men is available for custom adaptation. Physo Terminal Devices... Physo Wrist Units...
2 Physo Physo Terminal Devices Physo Terminal Devices The following pages, containing photographs of every passive prosthetic hand available from Otto Bock, are intended to assist you and your patients in selecting the most appropriate prosthetic hand. Otto Bock passive prosthetic hands consist of an inner hand and a prosthetic glove. The standard inner hand is molded from a light-weight foam material with steel wire reinforcement in each finger. Various adapters are available to provide connection to the prosthesis. Shape, color and detailed surface structure of the prosthetic glove give a lifelike appearance to the inner hand. The different models for children, women and men are illustrated for the right hand and are marked for identification as in the table below: Prosthetic glove Inner hand Children S= S= Women S= S= Men S= S= The order numbers appear on each page above the passive prosthetic hand. The prosthetic glove (line ) and inner hand (line ) each have unique numbers for the left and right side. S=xL S=xL 0 S=xR S=xR Composing the order number To precisely determine the correct size of the prosthetic glove and inner hand, take actual measurements of the metacarpal circumference (B) and middle finger length (C) of your patient guided by the following sketch. Comparison of the actual metacarpal circumference (B) and middle finger length (C) measurements from your patient with those indicated in the tables on pages. and. will help to ensure proper size selection. A = wrist circumference B = metacarpal circumference C = middle finger length D = below-elbow circumference E = length to elbow (for short sleeve, no measurement required) Ottobock Prosthetics - Upper Limb
3 Physo Physo Terminal Devices Metacarpal circumf. (B) Middle finger length (C) Wrist circumf. (A) Below-elbow circumf. (D) Length to elbow (E) These measurements lead for example to the following order number for the prosthetic glove and the corresponding inner hand. Actual measurements of all inner hands differ from those shown, as they are reduced by the wall thickness of the cosmetic glove. S= S= x L The final step in the selection process is to select the color shade, i.e. the color number. The standard gloves are available in shades which are reproduced on page. as accurately as possible, together with their corresponding code number. Color shade guides on actual glove material will be sent free of charge on request under order number M. After selecting the color, the order number for prosthetic glove and inner hand should appear as in the following example: S= x L S= x L If the inner hand is to be used for a partial hand replacement a T must be added to the order number as follows: S= x L T All measurements are stated in mm and are subject to a tolerance of ± mm.
4 Physo Physo Terminal Devices Prosthetic Gloves and Inner Hands for Children Measurements for the right hand Article Number for Ordering Measurements for the left hand length to elbow (E) below-elbow circumf. (D) wrist cicumf. (A) middle finger length (C) metacarpal circumf. (B) length to elbow (E) Article No. Check no. below-elbow circumf. (D) wrist cicumf. (A) middle finger length (C) metacarpal circumf. (B) Inner hand Article No. Prosthetic glove x L x R 0 0 x L 0 x R x 0L 0 x R x L 0 x R x L x R x L 0 x R 0 0 x 0L 0 x 0R S= S= 0 x L 0 x R 0 0 Prosthetic Gloves and Inner Hands for Women Measurements for the right hand Article Number for Ordering Measurements for the left hand Llength to elbow (E) below-elbow circumf. (D) wrist cicumf. (A) middle finger length (C) metacarpal circumf. (B) length to elbow (E) Article No. Check no. below-elbow circumf. (D) wrist cicumf. (A) middle finger length (C) metacarpal circumf. (B) Inner hand Article No. Prosthetic glove x L x R 0 x L 0 0 x R x 0L x 0R 0 x L x R 0 x L 0 x R 0 x L 0 00 x R x L x R x L 0 x R 0 0 x L x R 0 x L 0 x R x L 0 x R x L x R S= S= x L 0 x R x L x R 0 0 x L 0 x R Ottobock Prosthetics - Upper Limb
5 Physo Physo Terminal Devices Prosthetic Gloves and Inner Hands for Men Measurements for the right hand Article Number for Ordering Measurements for the left hand length to elbow (E) below-elbow circumf. (D) wrist cicumf. (A) middle finger length (C) metacarpal circumf. (B) length to elbow (E) Article No. Check no. below-elbow circumf. (D) wrist cicumf. (A) middle finger length (C) metacarpal circumf. (B) Inner hand Article No. Prosthetic glove 0 x L x R 00 0 x L x R 0 0 x L 0 x R 0 x L x R x 0L x 0R x L x R x L 0 0 x R 0 0 x L 0 x R 0 0 x L x R x L 0 0 x R 0 0 x L x R 0 x L x R 0 x L 0 x R x L 0 x 0R 0 0 x L x R 0 x L 0 x R x L 0 x R 0 x L 0 0 x R x L x R S= S= Examples for ordering: S= 0 x L bzw. S= 0 x L If the inner hand is to be used for partial hand replacement a T must be added to the article number, for example: S= 0 x L T
6 Physo Physo Terminal Devices 0 For color determination, please use the M Color Swatch. Prosthetic gloves in the colors,,,, 0 and are available as stock. For all other colors, please note that the gloves are fabricated only after receipt of an order and that, for this reason, delivery of such gloves will take longer. Ottobock Prosthetics - Upper Limb
7 Passive Prosthetic Hands for Children S= x L S= x R 0 0 S= x L S= x R
8 Passive Prosthetic Hands for Children S=0 x L S= x R S=0 x L S= x R 0 0 Ottobock Prosthetics - Upper Limb
9 Passive Prosthetic Hands for Children 0 0 S= x 0L S= x R S= x 0L S= x R
10 Passive Prosthetic Hands for Children 0 0 S= x L S= x R S= x L S= x R Ottobock Prosthetics - Upper Limb
11 Passive Prosthetic Hands for Children S= x L S= x R S= x L S= x R
12 Passive Prosthetic Hands for Children S= x L S= x R 0 0 S= x L S= x R Ottobock Prosthetics - Upper Limb
13 Passive Prosthetic Hands for Children S= x 0L S= x 0R S= x 0L S= x 0R 0 0
14 Passive Prosthetic Hands for Children S=0xL S=0xR S=0 x L S=0 x R 00 Ottobock Prosthetics - Upper Limb
15 Passive Prosthetic Hands for Women S= x L S= x R 0 S= x L S= x R
16 Passive Prosthetic Hands for Women S= x L S= x R 0 0 S= x L S= x R Ottobock Prosthetics - Upper Limb
17 Passive Prosthetic Hands for Women S=0 x 0L S= x 0R S=0 x 0L S= x 0R 0
18 Passive Prosthetic Hands for Women S= x L S=0 x R 0 0 S= x L S=0 x R Ottobock Prosthetics - Upper Limb
19 Passive Prosthetic Hands for Women 0 0 S= x L S= x R S= x L S= x R 0
20 Passive Prosthetic Hands for Women 0 0 S= x L S= x R S= x L S= x R 0 Ottobock Prosthetics - Upper Limb
21 Passive Prosthetic Hands for Women S= x L S= x R 0 0 S= x L S= x R 0 0 0
22 Passive Prosthetic Hands for Women S= x L S= x R 0 S= x L S= x R 0 Ottobock Prosthetics - Upper Limb
23 Passive Prosthetic Hands for Women S=0 x L S=0 x R 0 S=0 x L S=0 x R 0 0 0
24 Passive Prosthetic Hands for Women S=0 x L S= x R 0 S=0 x L S= x R 0 Ottobock Prosthetics - Upper Limb
25 Passive Prosthetic Hands for Women S= x L S= x R 0 0 S= x L S= x R
26 Passive Prosthetic Hands for Women S= x L S= x R 0 S= x L S= x R Ottobock Prosthetics - Upper Limb
27 Passive Prosthetic Hands for Women S=xL S=xR 0 0 S= x L S= x R
28 Passive Prosthetic Hands for Women S= x L S=00 x R 0 0 S= x L S=00 x R Ottobock Prosthetics - Upper Limb
29 Passive Prosthetic Hands for Women S=0 x L S=0 x R S=0 x L S=0 x R
30 Passive Prosthetic Hands for Men 0 S=0 x L S=0 x R S=0 x L S=0 x R Ottobock Prosthetics - Upper Limb
31 Passive Prosthetic Hands for Men S=0 x L S= x R 0 0 S=0 x L S= x R
32 Passive Prosthetic Hands for Men S=0 x L S=0 x R S=0 x L S=0 x R Ottobock Prosthetics - Upper Limb
33 Passive Prosthetic Hands for Men 0 0 S=0 x L S=0 x R S=0 x L S=0 x R 0 0
34 Passive Prosthetic Hands for Men S=0 x 0L S=0 x 0R 0 S=0 x 0L S=0 x 0R Ottobock Prosthetics - Upper Limb
35 Passive Prosthetic Hands for Men S=0 x L S= x R S=0 x L S= x R 0 0
36 Passive Prosthetic Hands for Men 0 0 S=0 x L S=0 x R S=0 x L S=0 x R Ottobock Prosthetics - Upper Limb
37 Passive Prosthetic Hands for Men 0 0 S=0 x L S= x R S=0 x L S= x R
38 Passive Prosthetic Hands for Men S= x L S= x R S= x L S= x R Ottobock Prosthetics - Upper Limb
39 Passive Prosthetic Hands for Men 0 0 S= x L S= x R 0 0 S= x L S= x R
40 Passive Prosthetic Hands for Men S= x L S= x R S= x L S= x R Ottobock Prosthetics - Upper Limb
41 Passive Prosthetic Hands for Men 0 0 S= x L S= x R 0 0 S= x L S= x R 0 0
42 Passive Prosthetic Hands for Men 0 S= x L S= x R 0 S= x L S= x R Ottobock Prosthetics - Upper Limb
43 Passive Prosthetic Hands for Men 0 0 S=0 x L S= x 0R S=0 x L S= x 0R
44 Passive Prosthetic Hands for Men S= x L S= x R S= x L S= x R 0 Ottobock Prosthetics - Upper Limb
45 Passive Prosthetic Hands for Men 0 S= x L S= x R 0 S= x L S= x R
46 Passive Prosthetic Hands for Men S= x L S= x R S= x L S= x R 0 0 Ottobock Prosthetics - Upper Limb
47 Passive Prosthetic Hands for Men S= x L S=0 x R S= x L S=0 x R 0 0
48 Passive Prosthetic Hands for Men S= x L S= x R S= x L S= x R Ottobock Prosthetics - Upper Limb
49 Physolino Babyhand, System Hands passive K Physolino Babyhand For babies and infants, made of medical silicone; hand circumference approx. 0 mm, finger length approx. 0 mm; the colour approximately corresponds to colour no.,, or of Ottobock's colour scale for prosthetic gloves, with the D lamination ring, Ø mm Article number Side Approximately corresponds to colour no. K=L Left (L) K=L Left (L) K=L Left (L) K=L Left (L) K=R Right (R) K=R Right (R) K=R Right (R) K=R Right (R) Y Lamination Dummy for Physolino Babyhand For matching prosthetic gloves, see Page G0
50 Physo Physo Wrist Units Physo Wrist Units D Lamination Ring for Physolino Baby Hand Article number Ø for D mm socket replacements 0A0 Wood Hand Adapter for connecting the passive inner hand with the forearm socket Article number 0A0 with threaded stud made of plastic, Mx. 0A Threaded Stud For connecting inner hand to wrist units without rachet Article number 0A with threaded stud Mx. Ottobock Prosthetics - Upper Limb
51 Notes
Manufacturing Guidelines
Manufacturing Guidelines Trans-Humeral Prosthesis Physical Rehabilitation Programme International Committee of the Red Cross 9 Avenue de la Paix 202 Geneva, Switzerland T + 4 22 734 60 0 F + 4 22 733 20
More informationfeatures bebionic3 utilizes leading-edge technology and unique, ergonomic features that make it unlike any other hand available.
be yourself When we created bebionic, we set out to design a prosthetic hand that could transform the lives of amputees worldwide, and help them regain a new level of independence and control. bebionic3
More informationInstallation instruction CASAFLEX - Connecting piece DN 100
1 CASAFLEX - 11 10 114,3 x 4,5 3 5 2 4 1 7 6 8 12 9 Do not begin work until you have read the installation instruction carefully. 1 internal backing sleeve 2 graphite packing 3 connecting piece 4 thrust
More informationRegal Suspension Systems
Regal MAGLOCK 3-01-3180K New MAGLOCK coming soon 3-01-3180K MAG Lock Designed to ease the frustration of donning a pin lock liner for patients K1 to K3 Developed using a rare earth magnet which achieves
More informationImprovement of control cable system of trans-humeral body-powered prostheses
Prosthetics and Orthotics International, 1999, 23, 123-129 Improvement of control cable system of trans-humeral body-powered prostheses I. KITAYAMA*, M. MATSUDA**, S. NAKAJIMA**, S. SAWAMURA**, H. NINOMIYA***
More informationFrequently Asked Questions
Frequently Asked Questions Q) How do I control a bebionic hand? A) Bebionic is a myoelectric system with an advanced, multiarticulating, state of the art compliant hand as a terminal device. Typical systems
More informationThere is no difference for the game of Sevens, Tens or Fifteens; illegal is illegal
Rugby is expanding quickly at all ages and with that comes more cross- over from other sports and activities. Players and coaches are bringing new techniques and skills from these other sports but with
More informationGUIDE TO A PERFECT MEN S SHIRT FIT
GUIDE TO A PERFECT MEN S SHIRT FIT We value quality and perfection. We know that every man is different. Your size, posture, figure, and the shape of your body all change the way a shirt fits. This is
More informationDetermining the Right Molding Process for Part Design
Determining the Right Molding Process for Part Design How RIM Molding Advantages Compare with Traditional Production Technologies Page 2 Introduction This White Paper details the part production processes
More informationCONTROL OF A MULTI-FINGER PROSTHETIC HAND
CONTROL OF A MULTI-FINGER PROSTHETIC HAND William Craelius 1, Ricki L. Abboudi 1, Nicki Ann Newby 2 1 Rutgers University, Orthotic & Prosthetic Laboratory, Piscataway, NJ 2 Nian-Crae, Inc., Somerset, NJ
More informationERGONOMIC PRODUCTS HAND PROTECTION IMPACT/ANTI-VIBRATION HOW DOES IT WORK? LEATHER:
HOW DOES IT WORK? LEATHER: EXAMPLE: HAND PROTECTION The fingerless style and stretch fabric provides optimal dexterity and comfort, while the Visco-Elastic Polymer (VEP) provides vibration and impact protection
More informationPOLICY 2: DEATH AND PERMANENT DISABILITY
POLICY 2: DEATH AND PERMANENT DISABILITY Article 1 - Death (as a result from any cause) 1.1. - Amount of indemnity The capital sum payable on the death of an Insured Person, shall be: 1. 25.000 USD in
More informationHeikki Uustal, MD Prosthetic/Orthotic Team JFK-Johnson Rehab Institute Edison, NJ
Heikki Uustal, MD Prosthetic/Orthotic Team JFK-Johnson Rehab Institute Edison, NJ 1 The goal is to generate a treatment plan to rehabilitate the patient and maximize their functional outcome 2 The treatment
More informationAll Weather Hall. Efficient, multipurpose & quick to build
All Weather Hall Efficient, multipurpose & quick to build ALL WEATHER HALL www.deboer.com www.deboer.com ALL WEATHER HALL A flexible solution for a multitude of needs All Weather halls from De Boer provide
More informationInstallation Manuals Version n. 01 of 14/06/2013
Technical Manuals Installation Manuals Version n. 01 of 14/06/2013 pag. 2 Index Index... 2 Introduction and general hints... 3 Curving Profile... 3 DESCRIPTION... 3 MATERIAL... 3 CERTIFICATE... 3 SIZES...
More informationS.T.O.R.M Foreskin Restoration (Staggered Tapered O-Ring Method)
Type: Tapeless, Self-contained, Non-Metallic Focus: 75% Inner foreskin, 25% Outer S.T.O.R.M Foreskin Restoration (Staggered Tapered O-Ring Method) How It Works The use of O-Rings for Foreskin Restoration
More informationWhat is a Biomedical Engineer?
A What is a Biomedical Engineer? Draw and label a picture of a biomedical engineer at work. Explain your drawing of a biomedical engineer: A-6 Student Post Assessment Lessons 1 and 2 What is a Biomedical
More informationA patented innovative material. New Soft Shell Protector Extreme protection for extreme use. Very high heat resistance
New Soft Shell Protector Extreme protection for extreme use A patented innovative material One prosthesis for all activities Very high heat resistance Moving safely in any environment with the everyday
More informationINTERNATIONAL HOCKEY FEDERATION PERFORMANCE REQUIREMENTS AND TEST PROCEDURES FOR HOCKEY BALLS. Published: April 1999
INTERNATIONAL HOCKEY FEDERATION PERFORMANCE REQUIREMENTS AND TEST PROCEDURES FOR HOCKEY BALLS Published: April 1999 CONTENTS 1 Introduction 2 Test Procedures General 3 Standards and Specific Test Procedures
More informationPortable digital microprocessor thermometers with interchangeable probes
JUMO GmbH & Co. KG Delivery address:mackenrodtstraße 14, 36039 Fulda, Germany Postal address: 36035 Fulda, Germany Phone: +49 661 6003-0 Fax: +49 661 6003-607 e-mail: mail@jumo.net Internet: www.jumo.net
More informationIPC ALPINE SKIING/SNOWBOARD EQUIPMENT RULE BOOK
IPC ALPINE SKIING/SNOWBOARD EQUIPMENT RULE BOOK 2013/2014 Season valid until 1 October 2014 IPC Alpine Skiing reserves the right to further interpret and/or supplement these Rules in order to help ensure
More informationSchlüter -KERDI-BOARD Substrate, structural panel, bonded waterproofing
Substrate, structural panel, bonded waterproofing The universal substrate for tiles Perfect covering No matter whether you work with mosaics or large format tiles, an absolutely level substrate with straight
More information7.3 Fit selection. Inner ring: Rotating. Outer ring: Stationary. Inner ring: Stationary. Outer ring: Rotating. Inner ring: Stationary
7. Bearing Fits 7. Fitting For rolling s, inner and outer rings are fixed on the or in the housing so that relative movement does not occur between fitting surfaces during operation or under. This relative
More informationRe-board Accessories
Re-board Accessories Plastic Screws Plastic screws specially developed for 16 mm Re-board, but works with most thicknesses. A special version comes with a loop for hanging (only available in transparent
More informationDressing and bandage
Dressing and bandage Mihajlo Lojpur, M.D., Ph.D. INTRODUCTION The terms dressing and bandage are often used synonymously. In fact, the term dressing refers more correctly to the primary layer in contact
More informationSLED-BASE ARM CHAIR 4-LEG ARMLESS CHAIR WITH STACKING DOLLY 4-LEG ARM CHAIR
standard AltA - understated elegance SLED-BASE ARM CHAIR 4-LEG ARMLESS CHAIR WITH STACKING DOLLY 4-LEG ARM CHAIR 2. Standard Alta, with its sleek lines, stylish looks and modern design, updates any room.
More informationCopyright 2008 OLYMPUS CORPORATION All Rights Reserved. Paper Craft Assembly Manual
Paper Craft Assembly Manual Before assembly: 1/9 Tips on assembly: Print all the parts (Photo-quality paper is recommended for ink-jet printers and paper of medium thickness (0.20 mm) for laser printers.)
More informationREMOVE AND REPLACE AIR CONDITIONER. 170 Popular Dodge REMOVAL: AIR CONDITIONING Section 4 Page 1
Section 4 Page 1 REMOVE AND REPLACE AIR CONDITIONER 170 Popular Dodge REMOVAL: 1. Turn main breaker to the OFF position. 2. Unplug Air conditioner unit. 3. Remove cabinet doors on either side of Air conditioner.
More information1.8 CRANKSHAFT OIL SEALS
SERIES 60 SERVICE MANUAL 1.8 CRANKSHAFT OIL SEALS An oil seal is fitted between each end of the crankshaft and the bores of the flywheel housing and gear case cover to retain the lubricating oil in the
More informationMachine devices, jig devices
Machine devices, jig devices 853 K0697 Rolled thread studs DIN 6379 Material: Tempered steel. KIPP Rolled thread studs DIN 6379 Order No. D L B1 B2 Approx. weight g Surface finish: Thread rolled. Class
More informationTechnical Data. 7. Bearing Fits. 7.1 Interference. 7.2 Calculation of interference F B LLLLLLLLL( A-54
Technical Data 7. Bearing Fits 7.1 Interference For rolling s the rings are fixed on the or in the housing so that slip or movement does not occur between the mated surface during operation or under. This
More informationSlide the new steering column shaft through the steering column from the driver compartment.
Slide the new steering column shaft through the steering column from the driver compartment. Push the column shaft through the steering column until the machined end is out past the column lower bushing.
More informationACCIDENT CLAIM FORM / HOSPITALISATION CLAIM FORM
ACCIDENT CLAIM FORM / HOSPITALISATION CLAIM FORM Important te: Please note that, under the policy terms and condition, the policy may be void if any information provided in this claim form are made knowingly
More informationTemperature Sensors. Accessories. for Injection Molding. Types 6192B, 6193B,
Accessories Temperature Sensors for Injection Molding Types 6192B, 6193B, 6194B, 6195B Temperature sensors for measuring the contact temperature directly in the cavity at the surface of the solidified
More informationElo Touch Solutions Wall-mounting Kit for the 5501L IDS Touchmonitors
Installation Manual Elo Touch Solutions Wall-mounting Kit for the 5501L IDS Touchmonitors SW602206 Rev B Table of Contents Chapter 1: Safety Warning... 3 Chapter 2: Kit Contents... 4 Included in Kit...
More informationBeware! your mouse can bite your hand!
Beware! your mouse can bite your hand! Pradnya R. Malandkar K. Munshi When a typical form of work is extensively performed repeatedly over a large time span (years) it causes R.S.I. (Repetitive Stress
More informationOccupational Therapy and Upper Limb Amputee Rehabilitation: Occupational Focused Intervention. Matthew Sproats (BaAppSc OT)
Occupational Therapy and Upper Limb Amputee Rehabilitation: Occupational Focused Intervention Matthew Sproats (BaAppSc OT) Declaration of Conflict The author and co authors declare no conflict of interest
More informationHuman Body Vocabulary Words Week 1
Vocabulary Words Week 1 1. arteries Any of the blood vessels that carry blood away from the heart to all parts of the body 2. heart The muscular organ inside the chest that pumps blood through the body
More informationwww.dianewrightfineart.com Page 1
TREES Trees. In almost all landscapes, they play an integral part in the scene. How the trees, grass and foliage are represented in a drawing have a direct impact on the entire mood and success of the
More informationAfter reading this lesson you will be able to: 12.3 IMPORTANCE OF ROOF 12.4 TYPES OF ROOF IN A HOUSE
86 :: Certificate in Construction Supervision (CIVIL) 12 ROOF 12.1 INTRODUCTION The structure provided to cover the house surface (floor) is known as roof. For different situation and requirement, it is
More informationTABLE TENNIS SINGLES RULES
TABLE TENNIS SINGLES RULES Table Tennis Singles Rules 1) Elimination Tournament. 2) One player per team. 3) Play best of 3 games. Games to 21, unless ties at 20. In that case, alternate service and must
More informationFig. 1: The frontal negative image of the Shroud. The left forearm looks shorter than the right forearm.
2 Fig. 1: The frontal negative image of the Shroud. The left forearm looks shorter than the right forearm. 3 THE DIFFERENCE IN THE LENGTH OF THE ARMS IS AN OPTICAL ILLUSION GILBERT R. LAVOIE On the frontal
More informationTechnical catalogue convectors POLAND 2012
Technical catalogue convectors POLAND 2012 index convectors review...3 Narbonne...4 Narbonne VT... 10 Narbonne V... 16 Narbonne V VT... 20 mounting distances for Narbonne...26 mounting distances for Narbonne
More information12.1 Schlüter -KERDI-BOARD
I n n o v a t i v e p r o f i l e s 12.1 Schlüter -KERDI-BOARD S u b s t r a t e U N I V E R S A L S T R U C T U R A L P A N E L, B O N D E D W A T E R P R O O F I N G Application and Function Schlüter
More informationConfort 160. Sliding Systems. Sapa Building System
Confort 160 Sliding Systems Sapa Building System Confort 160 is a high performance thermally insulated sliding window system, with a user-friendly slide action. The system, which has an attractive aesthetic
More informationTRITON CONTAINER INTERNATIONAL. Reefer Technical Bulletins. Version 4.0
TRITON CONTAINER INTERNATIONAL Version 4.0 February 2013 Table Of Contents (Hold Ctrl button and click on any item below to go directly to that section of the manual.) 1 INTRODUCTION... 3 2 REFRIGERATED
More informationTHE SKELETAL SYSTEM FUNCTIONS OF THE SKELETAL SYSTEM
THE SKELETAL SYSTEM The skeleton is the body s bony framework which consists of 206 bones. The bones are made up of water(45%), calcium and phosphorous(35%) and other organic materials(20%). The calcium
More informationBuilt to Last. Built for Beauty. Good. Solid. Logix. TM
Built to Last. Built for Beauty. Good. Solid. Logix. TM Quality, Value and Service Introducing LOGIX Insulated Concrete Forms. Based on the simple concept of interlocking blocks, LOGIX ICF gives you a
More informationWhat you need to know about...
What you need to know about... May 2010 PharmaCare Prosthetic Benefits: Application for Financial Assistance (Health Form #5402) General Instructions Health care providers must apply for pre-approval for
More informationTBi Industries. MIG / MAG Welding torches TBi Expert 0. 1
TBi Industries MIG / MAG Welding torches TBi Expert 1 0. 1 CONTENTS. TBi Expert Gas cooled torches TBi 150 Classic Series 60% (10 min.) Mix : 150 A CO 2 : 180 A Ø 0.6-1.0 mm Water cooled torches TBi 240
More informationDTU Animal Cart Programme
DTU Animal Cart Programme TECHNICAL 21 RELEASE PIPE AND ROLLER DONKEY CART AXLES Development Technology Unit, Department of Engineering, University of Warwick, Coventry, CV4 7AL UK, tel: +44 (0)1203 523523
More informationInterlocking Concrete Paving Stones
Interlocking Concrete Paving Stones Manufacturers of Quality Masonry Products Expand your living space outdoors using interlocking concrete paving stones from Air Vol Block Create instant curb appeal by
More informationInstalling Window and Door Mouldings
Installing Window and Door Mouldings About Window and Door Mouldings The trim around windows and doors greatly influences the look and style of your interior. They also bridge the gaps and cover spaces
More information4-Speed Kick Start Kit
4-Speed Kick Start Kit 22-1020 Installed 22-1042 Installed 22-1042 Heavy Duty Kickstart Kit features a chrome smooth thick wall kick cover and heavy duty kick start arm. Fits all 4-Speed Big Twin 1936-84.
More informationUL 580 TEST REPORT. Rendered to: ARMSTRONG WORLD INDUSTRIES. SERIES/MODEL: MW Vector PRODUCT TYPE: Ceiling System, 3' OC
UL 580 TEST REPORT Rendered to: ARMSTRONG WORLD INDUSTRIES SERIES/MODEL: MW Vector PRODUCT TYPE: Ceiling System, 3' OC Report No.: Test Dates: 12/14/09 Through: 12/22/09 Report Date: 03/12/10 Expiration
More informationRemovable Insulation Blankets from A to Z
Removable Insulation Blankets from A to Z At first glance, making up a removable insulation blanket seems somewhat simple take some insulation, put some mesh on one side, a cover on the other, sew them
More informationDie casting Figure M2.3.1
Die casting Die casting is a moulding process in which the molten metal is injected under high pressure and velocity into a split mould die. It is also called pressure die casting. The split mould used
More informationFlexible Printed Circuits Design Guide
www.tech-etch.com/flex Flexible Printed Circuits Design Guide Multilayer SMT Assembly Selective Plating of Gold & Tin-Lead Fine Line Microvias Cantilevered & Windowed Leads 1 MATERIALS CONDUCTOR Copper
More information2 THE LAWS OF TABLE TENNIS
2 THE LAWS OF TABLE TENNIS 2.1 THE TABLE 2.1.1 The upper surface of the table, known as the playing surface, shall be rectangular, 2.74m long and 1.525m wide, and shall lie in a horizontal plane 76cm above
More informationSUGGESTED SPECIFICATION EXHAUST SYSTEM SILENCER, FLEX CONNECTOR, INSULATION BLANKETS, WALL / ROOF THIMBLES
SUGGESTED SPECIFICATION EXHAUST SYSTEM SILENCER, FLEX CONNECTOR, INSULATION BLANKETS, WALL / ROOF THIMBLES 4121 N.W. 37 th Street, Lincoln, NE 68524 Telephone (402) 470-2627 Fax (404) 470-2410 www.gtexhaust.com
More informationVerification Experiment on Cooling and Deformation Effects of Automatically Designed Cooling Channels for Block Laminated Molds
International Journal of Engineering and Advanced Technology (IJEAT ISSN: 2249 8958 Volume-4 Issue-5 June 2015 Verification Experiment on Cooling and Deformation Effects of Automatically Designed Cooling
More informationSewing and Textiles. Basic Supplies: Advanced Project Supplies: Needed: Optional:
Sewing and Textiles November 2008 FL/ST/Construction/2008-101pr Project Skill: Organizing sewing tools Life Skill: Learning to learn and decision making Level: 1A Basic Sewing Supplies Debra Proctor, M.S.,
More informationPIPE REHABILITATION. Industrial Wastewater Municipal Wastewater Drinking Water Pressure Pipes
PIPE REHABILITATION Industrial Wastewater Municipal Wastewater Drinking Water Pressure Pipes About Us An HDPE after mechanical insertion into an egg-shaped brick work sewer sized 1400 x 2100 mm (or 56
More informationAmendments to the Compendium of Classification Opinions
Amendments to the Compendium of Classification Opinions The following list contains the decisions taken by the Harmonized System Committee (35 th Session March 2005) concerning amendments to the Harmonized
More informationMeeting the Fire Code with Continuous Foam Plastic Insulation
Dow Building Solutions Meeting the Fire Code with Continuous Foam Plastic Insulation The 2012 International Building Code (IBC) specifies the fire tests that must be passed if a foam plastic material is
More informationRECON Ford 5-Piece LED Cab Roof Light Installation
RECON Ford 5-Piece LED Cab Roof Light Installation PART # s: 264143AM (amber lens), 264143BK (smoked lens), & 264143CL (clear lens) Email: info@reconaccessories.com Website: http://www.reconaccessories.com
More informationRollers. from the UK s largest roller manufacturer. Quality Performance Reliability
Rollers from the UK s largest roller manufacturer Quality Performance Reliability 42 Index Gravity Rollers Light to Medium Duty 4 Heavy Duty 5 Plastic Rollers 6 Stainless Steel Rollers 7 Grooved Rollers
More information2. Division 05 Structural Steel Framing for steel framework requirements
SECTION 131200 - CLIMBING WALLS PART 1 GENERAL 1.1 SUMMARY A. This section includes the following: 1. GFRC Rock Realistic Climbing Wall System B. Related Sections 1. Division 04 Unit Masonry 2. Division
More informationTECHNICAL DATASHEET Incremental Encoder RI 58-O / RI 58-T
Universal industry standard encoder Up to 40 000 steps with 0 000 pulses High signal accuracy Protection class up to IP67 Flexible due to many flange and configuration variants Suitable for high shock
More informationInstallation Instructions READ BEFORE INSTALLING UNIT For SLO3 Air Conditoner (8,000~12,000 BTU)
RE EFORE INSTLLING UNIT For SLO3 ir onditoner (8,000~2,000 TU) INSTLLTION WRNINGS N UTION arefully read the installation manual before beginning. Follow each step as shown. Observe all local, state, and
More informationPIPING SYSTEM - ABRASIVE SLURRIES Engineering Standard Specification. 96 B. Riutta
PIPING SYSTEM - ABRASIVE SLURRIES Engineering Standard Specification Number: 3503-11.2.610 Rev. 2 Rubber Lined Steel Pipe and Fittings Mechanically Coupled Plain End Type System Issued Revised Approved
More informationBinocular Vision and The Perception of Depth
Binocular Vision and The Perception of Depth Visual Perception How one visually interprets a scene 4 forms of perception to be studied: Depth Color Temporal Motion Depth Perception How does one determine
More informationAwning Instructions. Standard Manual 1.5m to 4.5m
Awning Instructions Standard Manual 1.5m to 4.5m English Standard Manual Instructions Contents Warning 1.5m 3.0m Awnings 4 x Expansion bolts (2 per bracket)** 2 x brackets 1 x Awning 1 x Winder handle
More informationKWIK SEW 'S SEWING ROOM SERIES
KWIK SEW 'S SEWING ROOM SERIES MEASURING & BASIC ALTERATIONS Use the expertise behind KWIK SEW patterns to help achieve a perfect fit! Measuring the body and choosing the correct size pattern. A PERFECT
More informationPAAM COMMERCIAL PRIVATE LIMITED
METAL PACKAGING We at Paam Group have been providing vast range of packaging products to our customers based on their preferences, needs and specifications. We provide all the materials required in metal
More informationOD 1401 9 PRECISION MEASURING INSTRUMENTS
SUBCOURSE EDITION OD 1401 9 PRECISION MEASURING INSTRUMENTS PRECISION MEASURING INSTRUMENTS SUBCOURSE OD1401 EDITION 9 Unites States Army Combined Arms Support Command Fort Lee, VA 23801-1809 5 CREDIT
More informationBatibox TM flush-mounting boxes for dry partitions
flush-mounting boxes for dry partitions 800 51 800 42 800 53 800 54 800 42 + 800 71 800 77 Cat.Nos 1-gang boxes For 1 module 20 800 40 Drilling diameter 32 mm Depth 40 mm For 1 gang or 2 modules For wiring
More informationTechCut 4 Precision Low Speed Saw
Product Brochure TechCut 4 Precision Low Speed Saw 3" - 6" Blade Range Digital Speed Display 1-Micron Sample Indexing Spring-Loaded Dressing Stick Attachment All Aluminum & Stainless Steel Construction
More informationPART-II (COMMERCIAL / PRICE BID) DESIGN, SUPPLY AND INSTALLATION OF CUSTOMIZED STEEL LAB FURNITURE.AT N.C.C.S., PUNE
(An Autonomous Institution of the Department of Biotechnology, Govt. of India) N.C.C.S. Complex, Ganeshkhind, Pune University Campus, Pune 411007. PART-II (COMMERCIAL / PRICE BID) DESIGN, AND INSTALLATION
More informationSection M POWER LIFTS
Section M POWER LIFTS December 2009 1M Index 1. 53-520244-000 Poly V Idler Assembly 2. 53-520205-000 N.A. Mounting Bracket 3. 53-520212-000 Cable Assembly 4. 53-600149-000 Wire Harness Assembly 5. 53-860322-010
More informationKIRÁLY TRADING KFT H-1151 Budapest Mogyoród útja 12-14 tel: 061307-3801 Email_pzoli@kiralytrading.hu. Clamps Clamping devices
04000 Clamps Clamping devices 23000 22000 21000 20000 09000 08000 07000 06000 05000 04000 03000 02000 01000 297 04010 Adjustable straps Tempered steel 1.1191 Black oxide finish nlm 04010-101 Suitable thrust
More informationvalid as of 1 April 2014 Intec injection hose system
FRANK Product List valid as of 1 April 2014 Intec injection hose system Intec injection hose systems Intec injection hose systems ensure secure, simple and rapid sealing of horizontal and vertical construction
More informationAllison Rae Paramount Industries Rhode Island School of Design ID 87. Prototyping Overview
Allison Rae Paramount Industries Rhode Island School of Design ID 87 Prototyping Overview Prototyping for Mechanical Parts Paramount Industries Started as prototyping vendor, then added: Industrial Design
More informationSelf-Range of Motion Exercises for Shoulders, Arms, Wrists, Fingers
Self-Range of Motion Exercises for Shoulders, Arms, Wrists, Fingers These exercises will help keep your muscles strong and mobile, and your joints flexible. Other benefits of these exercises include: C
More informationRTD Temperature Probe for the Food/Pharmaceutical Industry
sales@jumo.co.uk Data Sheet 902810 Page 1/9 RTD Temperature Probe for the Food/Pharmaceutical Industry For temperatures between -50 and +250 C Protection type up to IP69 according to DIN EN 60529 (IP69K
More informationInForm Mobile Units. Selection. Equipment trolley, filing trolley Printer/PC trolley Overhead/demo trolley
Selection Equipment trolley, filing trolley Printer/PC trolley Overhead/demo trolley Basic mobile unit Basic mobile with vertical profiles Installation options Functional shelf, low Functional shelf, inclinable
More informationFLEXIBLE COPPER & ALUMINIUM CONNECTIONS. Product Range 1 VGL - ALLIED CONNECTORS
Product Range ROUND STRANDED COPPER CABLE Electrolytic Copper / Oxygen Free Copper Conforms to DIN 46438 Standards Finish: Bare Copper / Tinned / Silver-plated ROUND BRAID / ROUND STRANDED CABLE WITH OVERALL
More informationFRONT BUMPER INSTALLATION INSTRUCTIONS 2007-2011 DODGE / MERCEDES SPRINTER
Aluminess Products Inc 9402 Wheatlands Ct. #A Santee, CA 92071 619-449-9930 FRONT BUMPER INSTALLATION INSTRUCTIONS 2007-2011 DODGE / MERCEDES SPRINTER Please read before beginning Stainless steel hardware
More informationC O N V E Y O R C O M P O N E N T S C H A I N S B E L T S B E A R I N G S
C O N V E Y O R C O M P O N E N T S C H A I N S B E L T S B E A R I N G S January 2009 Issue 6 Valu Guide Brackets The Ultimate in Adjustability and Cost Savings Valu Guide brackets are part of a family
More informationInstallation Guide 2010 BMW S1000RR Full Exhaust System
Installation Guide 2010 BMW S1000RR Full Exhaust System!! THIS PRODUCT IS DESIGNED FOR USE IN CLOSED COURSE RACING AND IS NOT INTENDED FOR HIGHWAY USE!! Congratulations on the purchase of your new TaylorMade
More informationBiomedical Engineering Prosthetic Arm
Biomedical Engineering Prosthetic Arm LEVEL: DESIGN TYPE: DESIGN TEAM COMPOSITION: NUMBER OF TEAMS: High School Prepared in Advance 1 4 students per team 1 2 per school OVERVIEW: MATERIALS: Students will
More information19" Data Racks. Adjustable feet To compensate for uneven floors and assure great stability all feet can be up to 20 mm adjusted.
19" Data Racks Attractive design and high quality are characteristic. Basic framework is welded from multiple bent metal plate, which assures great rigidity suitable for heavier equipment. All profile
More information60.12. Depend-O-Lok FxE Expansion Coupling. System No. Submitted By Spec Sect Para Location Date Approved Date. DEPEND-O-LOK FxE EXPANSION COUPLING
60.1 D-O-L FxE expansion couplings are a bolted, split-sleeve design that provides for expansion and contraction at the coupled joint. These couplings are furnished with restraint rings that, when affixed
More informationInstitutional members names have been submitted to each vendor for membership verification at the time of ordering.
Website informational sheet PURCHASING CO-OP PRICE LIST 2016 for MPMA Members Description of Products & Discounts From Participating Companies These are some of the deepest discounts you will find because
More informationMASCOT MULTISAFE 133
MASCOT MULTISAFE Multi-functional workwear Anti-static, acid-resistant and flame retardant Smart, functional design features Three standard colours For those needing integrated safety 133 PyroPro meets
More informationSafety at a high level!
SIKA Level Switch SIKA Level Switch Safety at a high level! Convincing Advantages easy and reliable method to monitor fluid levels proven float principle easy side installation using threads ¾" or ½" BSP
More informationARCHERY ARM GUARD Pattern & Instructions
ARCHERY ARM GUARD Pattern & Instructions This document was prepared with in mind that it was intended for people having already at least the basics in leather work, not for totally newbie. However this
More informationLapping and Polishing Basics
Lapping and Polishing Basics Applications Laboratory Report 54 Lapping and Polishing 1.0: Introduction Lapping and polishing is a process by which material is precisely removed from a workpiece (or specimen)
More informationMultifocal Motor Neuropathy. Jonathan Katz, MD Richard Lewis, MD
Multifocal Motor Neuropathy Jonathan Katz, MD Richard Lewis, MD What is Multifocal Motor Neuropathy? Multifocal Motor Neuropathy (MMN) is a rare condition in which multiple motor nerves are attacked by
More informationTIE ROD END DESIGN TUTORIAL
TIE ROD END DESIGN TUTORIAL THE FOLLOWING IS A SIMPLIFIED STEP-BY-STEP GUIDE INTENDED TO ILLUSTRATE THE DECISIONS AND COMPROMISES INVOLVED IN DESIGNING A TIE ROD END. THE PROCESS FOR DESIGNING ANY BALL
More information