Nanoptix Inc 699 Champlain Street Dieppe, NB, Canada E1A1P6

Transcription

1 Report Reference ID: TRFEMC Test specifications: Radio disturbance FCC 47 CFR Part 15, Subpart B Verification (USA) ICES-003 Issue 4 February 2004 (Canada) EN 55022: A1: 2007 (European Union) Applicant: Product Family: Testing laboratory: Nanoptix Inc 699 Champlain Street Dieppe, NB, Canada E1A1P6 Paycheck 3 Thermal Printer Model: Paycheck 4 Thermal Printer Model: Paycheck Desktop w/paycheck 3 or 4 Model: Nemko Canada Inc. 303 River Road Ottawa, ON, Canada K1V 1H2 Telephone: (613) Facsimile: (613) Tested by: Name and title David Duchesne, Senior EMC Specialist Sumeet Bhalla, EMC Specialist Date Authorized by: Daniel Hynes, Senior EMC Specialist March 19, 2010 Nemko Canada Inc., a testing laboratory, is accredited by the Standards Council of Canada. The tests included in this report are within the scope of this accreditation. EN (2006 with A1)-CISPR22-FCC-ICES-AS-EN EN doc - Date: February 2010

2 Table of contents Section 1: Report summary Test specifications Statement of compliance Exclusions Test report revision history Test location Limits of responsibility...3 Section 2: Summary of test results...4 Section 3: Equipment under test (EUT) details Sample information EUT information EUT exercise/monitoring details EUT setup diagram for Paycheck 3 Thermal Ticket Printer EUT setup diagram for Paycheck 4 Thermal Ticket Printer...7 Section 4: Engineering considerations Modifications incorporated in the EUT Technical judgment Deviations from laboratory tests procedures...8 Section 5: Test conditions Normal temperature, humidity and air pressure test conditions Power supply range:...9 Section 6: Measurement uncertainty Radiated disturbance (Paycheck 4 Thermal Ticket Printer) Radiated disturbance (Paycheck 3 Thermal Ticket Printer) Conducted disturbance at mains port (Paycheck 4 Thermal Ticket Printer) Conducted disturbance at mains port (Paycheck 3 Thermal Ticket Printer)...24 Section 8: EUT photos...32 Report reference ID: TRFEMC Page 2 of 34

3 Section 1: Report summary Nemko Canada Inc., Section 1: Report summary 1.1 Test specifications FCC 47 CFR Part 15, Subpart B Verification (USA) ICES-003 Issue 4 February 2004 (Canada) EN 55022: A1: 2007 (European Union) 1.2 Statement of compliance In the configuration tested, the EUT was found compliant. Testing was completed against all relevant requirements of the test standard. Results obtained indicate that the product under test complies in full with the requirements tested. The test results relate only to the items tested. See Summary of test results for full details. 1.3 Exclusions None 1.4 Test report revision history Revision # Details of changes made to test report TRF Original report issued 1.5 Test location 303 River Road, R.R. 5, Ottawa, Ontario, Canada, K1V 1H2 1.6 Limits of responsibility Note that the results contained in this report relate only to the items tested and were obtained in the period between the date of initial receipt of samples and the date of issue of the report. This test report has been completed in accordance with the requirements of ISO/IEC All results contain in this report are within Nemko Canada s ISO/IEC accreditation. Nemko Canada Inc. authorizes the applicant to reproduce this report provided it is reproduced in its entirety and for use by the company s employees only. Any use which a third party makes of this report, or any reliance on or decisions to be made based on it, are the responsibility of such third parties. Nemko Canada Inc. accepts no responsibility for damages, if any, suffered by any third party as a result of decisions made or actions based on this report. Report reference ID: TRFEMC Page 3 of 34

4 Section 2: Summary of test results Nemko Canada Inc., Section 2: Summary of test results EN 55022: A1: 2007, CISPR 22: A1: 2005, AS/NZS CISPR 22: 2006 Environmental phenomenon Radiated disturbance below 1 GHz Radiated disturbance above 1 GHz Conducted disturbance at mains port Conducted common mode (asymmetric mode) disturbance at telecommunication ports Product classification: Class B FCC 47 CFR Part 15, Subpart B for Digital Devices Environmental phenomenon Radiated disturbance Conducted disturbance at mains port Product classification: Class B ICES-003 Issue 4 February 2004 Environmental phenomenon Radiated disturbance Conducted disturbance at mains port Product classification: Class B Verdict Pass Pass Pass N/A Verdict Pass Pass Verdict Pass Pass Report reference ID: TRFEMC Page 4 of 34

5 Section 3: Equipment under test (EUT) details Nemko Canada Inc., Section 3: Equipment under test (EUT) details 3.1 Sample information Paycheck 3 Thermal Ticket Printer Receipt date: July 17, 2006 Nemko sample number: Item # 11 Paycheck 4 Thermal Ticket Printer Receipt date: March 2, 2009 Nemko sample number: Item # EUT information Product Family: Paycheck 3 Thermal Printer Model: Serial #: P Paycheck 4 Thermal Printer Model: Serial #: P Paycheck Desktop w/paycheck 3 or 4 Model: Serial #: N/A Manufacturer Nanoptix Inc 699 Champlain Street Dieppe, NB, Canada E1A1P6 EUT description and theory of operation The EUT is a thermal printer for ticket application. EUT power requirements Powered via an external AC adapter ( VAC 50/60 Hz) EUT operational frequencies 12 MHz, and 200 MHz EUT software details Paycheck 3 Thermal Ticket Printer 1.72Q (Testing Continuous Print) Paycheck 4 Thermal Ticket Printer 2.91V (Testing Continuous Print) 3.3 EUT exercise/monitoring details Continuous print state. Tickets were visually inspected to ensure no corruption. Report reference ID: TRFEMC Page 5 of 34

6 Section 3: Equipment under test (EUT) details Nemko Canada Inc., 3.4 EUT setup diagram for Paycheck 3 Thermal Ticket Printer Equipment Configuration List Item Description Identification: (MN#, SN#, PN#, Rev.) (A) Paycheck Printer SN# P300209, PN# (B) Power Supply MN# GT , SN# RoHS /06, PN# ROHS EUT Ports Item Description Indoor/Outdoor Type (See Legend) Qty i. Standard USB Port Indoor 4 1 ii. Universal Serial Port Indoor 4 1 iii. Bezel LED Port Indoor 4 1 Inter-Connection Cables Item Description Length (m) (1) DC Power Cable 1 (2) USB Cable 3 Legend: 1 = AC Power Input/Output, 2 = DC Power Input/Output, 3 = Telecom, 4 = Non-telecom I/O, 5 = Maintenance, 6 = Fiber Optic Configuration of the Equipment Under Test (EUT) Report reference ID: TRFEMC Page 6 of 34

7 Section 3: Equipment under test (EUT) details Nemko Canada Inc., 3.5 EUT setup diagram for Paycheck 4 Thermal Ticket Printer Equipment Configuration List Description Identification: (MN#, SN#, PN#, Rev.) Paycheck 4 Thermal Ticket Printer MN# , SN# P Nanoptix ITE Power Supply PN# GS-1110, SN# IBM Think Pad FA IIBM AC Adapter FA Configuration of the Equipment Under Test (EUT) Report reference ID: TRFEMC Page 7 of 34

8 Section 4: Engineering considerations Nemko Canada Inc., Section 4: Engineering considerations 4.1 Modifications incorporated in the EUT There were no modifications performed to the EUT during this assessment. 4.2 Technical judgment The Paycheck 3 and 4 use the same PCB and only differ in their chassis. The Paycheck Desktop was not assessed, as it is identical to the Paycheck 3 and 4. The Paycheck Desktop has two alternate constructions: one with Paycheck 3 the other with Paycheck 4. The only difference is that the Desktop adds an enclosure, which in the Nanoptix's engineering judgment will only improve EMC. 4.3 Deviations from laboratory tests procedures No deviations were made from laboratory test procedures. Report reference ID: TRFEMC Page 8 of 34

9 Section 5: Test conditions Nemko Canada Inc., Section 5: Test conditions 5.1 Normal temperature, humidity and air pressure test conditions Temperature: C Relative humidity: % Air pressure: kpa When it is impracticable to carry out tests under these conditions, a note to this effect stating the ambient temperature and relative humidity during the tests shall be recorded and stated. 5.2 Power supply range: The normal test voltage for equipment to be connected to the mains shall be the nominal mains voltage. For the purpose of the present document, the nominal voltage shall be the declared voltage, or any of the declared voltages ±5 %, for which the equipment was designed. Report reference ID: TRFEMC Page 9 of 34

10 Section 6: Measurement uncertainty Nemko Canada Inc., Section 6: Measurement uncertainty Measurement Test specification Ulab khz 4.0 db Conducted disturbance MHz 3.6 db MHz Horizontal polarization 4.7 db MHz Horizontal polarization 4.7 db Radiated disturbance MHz Vertical polarization 4.9 db MHz Vertical polarization 4.9 db Accuracy of measurement Measurement uncertainty was calculated using the methods described in CISPR 16-4 Specification for radio disturbance and immunity measuring apparatus and methods Part 4: Uncertainty in EMC measurements and Nemko Canada Inc. procedure EMC/MUC/001 uncertainty in EMC measurements. Report reference ID: TRFEMC Page 10 of 34

11 Test name: Radiated disturbance (Paycheck 4 Thermal Ticket Printer) Test date: March 9, 2009 Test engineer: David Duchesne Supply input: 230VAC/50Hz 7.1 Radiated disturbance (Paycheck 4 Thermal Ticket Printer) References Test method used: CISPR 22 and ANSI C Test data Test facility Measuring distance (m) Antenna height variation (m) Turn table position ( ) 3 m Semi anechoic chamber Results Refer to spectral plots and tables of this section. Observations/special notes The EUT was set up as table top configuration. Test equipment list Equipment Manufacturer Model No. Asset/Serial No. Next cal. 3 m EMI Test Chamber TDK SAC-3 FA May 06/09 Bilog Sunol JB3 FA Jan. 27/10 Horn Antenna #2 EMCO 3115 FA Jan. 21/ GHz Amplifier JCA JCA FA Oct 2/09 50 Coax cable HUBER + SUHNER None FA Aug. 05/09 50 Coax cable HUBER + SUHNER None FA July 07/09 Receiver/Spectrum Analyzer Rohde & Schwarz ESU 26 FA Dec. 16/09 Note: N/A = Not applicable, NCR = No cal required, COU = Cal on use Report reference ID: TRFEMC Page 11 of 34

12 Test name: Radiated disturbance (Paycheck 4 Thermal Ticket Printer) Test date: March 9, 2009 Test engineer: David Duchesne Supply input: 230VAC/50Hz Spectral plots FCC Part 15 Class B Electric Field Strength 3m QP+AV 50 CISPR 22 Electric Field Strength 3 m QP Class B 45 Level in dbµv/m M M G Frequency in Hz Vertical and Horizontal (Paycheck 4 Ticket Printer) CISPR 22 QP Class B 3m Limit FCC Part 15 Class B 3m Limit Preview Peak Detector Final Q-Peak Detector The spectral plot is a summation of a vertical and horizontal scan. The spectral scan has been corrected with transducer factors (i.e. antenna factors, cable loss, amplifier gains, and attenuators) for determination of compliance. Limits have been adjusted to reflect 3 m requirements. A preview measurement was generated with receiver in continuous scan or sweep mode while the EUT was rotated and antenna adjusted to maximize radiated emission. Emissions detected within 6 db or above limit were re-measured with the appropriate detector against the correlating limit and recorded as the final measurement. Receiver/Spectrum analyzer settings: 30 MHz to 1 GHz Preview measurements Final measurement Receiver: 120 khz RBW, Peak detector, max hold Receiver: 120 khz RBW, Quasi-peak detector 1 GHz to 40 GHz Preview measurements Final measurement Spectrum analyzer: 1 MHz RBW, Peak detector, max hold Receiver: 1 MHz RBW, Average and Peak detector Measurement time 100ms Report reference ID: TRFEMC Page 12 of 34

13 Test name: Radiated disturbance (Paycheck 4 Thermal Ticket Printer) Test date: March 9, 2009 Test engineer: David Duchesne Supply input: 230VAC/50Hz Spectral plots, continued The spectral plot is a summation of a vertical and horizontal scan. The spectral scan has been corrected with transducer factors (i.e. antenna factors, cable loss, amplifier gains, and attenuators) for determination of compliance. Limits have been adjusted to reflect 3 m requirements. A preview measurement was generated with receiver in continuous scan or sweep mode while the EUT was rotated and antenna adjusted to maximize radiated emission. Emissions detected within 6 db or above limit were re-measured with the appropriate detector against the correlating limit and recorded as the final measurement. Receiver/Spectrum analyzer settings: 30 MHz to 1 GHz Preview measurements Final measurement Receiver: 120 khz RBW, Peak detector, max hold Receiver: 120 khz RBW, Quasi-peak detector 1 GHz to 40 GHz Preview measurements Final measurement Spectrum analyzer: 1 MHz RBW, Peak detector, max hold Receiver: 1 MHz RBW, Average and Peak detector Measurement time 100ms Report reference ID: TRFEMC Page 13 of 34

14 Test name: Radiated disturbance (Paycheck 4 Thermal Ticket Printer) Test date: March 9, 2009 Test engineer: David Duchesne Supply input: 230VAC/50Hz Tabular data ICES-003 and EN Frequency (MHz) Q-peak field strength (dbµv/m) Meas. time (ms) Bandwidth (khz) Antenna height (cm) Pol. Turn table position Correction (db) Margin (db) Limit (dbµv/m) V V V V V V V H V V V V V V H H FCC 47 CFR Part 15, Subpart B Frequency (MHz) Average field strength (dbµv/m) Meas. Time (ms) Bandwidth (khz) Antenna height (cm) Pol. Turn table position Correction (db) Margin (db) Limit (dbµv/m) V V V V V V V H V V V V V V H H Notes Correction factor includes antenna, cable loss, amplifier, and attenuators. Field Strength measurement is a summation of the raw measurement value and the correction factor. Report reference ID: TRFEMC Page 14 of 34

15 Test name: Radiated disturbance (Paycheck 4 Thermal Ticket Printer) Test date: March 9, 2009 Test engineer: David Duchesne Supply input: 230VAC/50Hz Setup photos Report reference ID: TRFEMC Page 15 of 34

16 Test name: Radiated disturbance (Paycheck 3 Thermal Ticket Printer) Test date: June 15, 2006 Test engineer: Sumeet Bhalla Supply input: 230VAC/50Hz 7.2 Radiated disturbance (Paycheck 3 Thermal Ticket Printer) References Test method used: CISPR 22 and ANSI C Test data Test facility Measuring distance (m) Antenna height variation (m) Turn table position ( ) Dome ICES-003 and EN Freq. (MHz) Ant. Pol. V/H RCVD Signal (dbµv) Ant. Factor (db) Amp. Gain (db) Cable Loss (db) Field Strength (dbµv/m) Limit (dbµv/m) Margin (db) Detector LP1 H N/A Q-Peak N/A LP1 H N/A Q-Peak N/A BC2 V N/A Q-Peak N/A LP1 H N/A Q-Peak N/A BC2 V N/A Q-Peak N/A LP1 V N/A Q-Peak N/A FCC 47 CFR Part 15, Subpart B Freq. (MHz) Ant. Pol. V/H RCVD Signal (dbµv) Ant. Factor (db) Amp. Gain (db) Cable Loss (db) Field Strength (dbµv/m) Limit (dbµv/m) Margin (db) Detector LP1 H N/A Q-Peak N/A LP1 H N/A Q-Peak N/A BC2 V N/A Q-Peak N/A LP1 H N/A Q-Peak N/A BC2 V N/A Q-Peak N/A LP1 V N/A Q-Peak N/A Legend: Antenna Legend: BC = Biconical, BL = Bilog, LP = Log-Periodic, Horn = Horn, ED = EMCO Dipole Detector Legend: Q-Peak = 120kHz RBW, Average = 1.0MHz RBW Amp. Amp. Observations/special notes The EUT was set up as table top configuration. No emissions within 10dB of limit were detected above 1 Gig. Test equipment list Equipment Manufacturer Model No. Asset/Serial No. Next cal. Receiver Rohde & Schwarz ESVS-30 FA July 27/06 Biconical (2) Antenna EMCO 3109 FA Aug. 26/06 Log Periodic Antenna #1 EMCO LPA-25 FA Aug. 29/06 Note: N/A = Not applicable, NCR = No cal required, COU = Cal on use Report reference ID: TRFEMC Page 16 of 34

17 Test name: Radiated disturbance (Paycheck 3 Thermal Ticket Printer) Test date: June 15, 2006 Test engineer: Sumeet Bhalla Supply input: 230VAC/50Hz Setup photos Report reference ID: TRFEMC Page 17 of 34

18 Test name: Conducted disturbance at mains port (Paycheck 4 Thermal Ticket Printer) Test date: March 9, 2009 Test engineer: David Duchesne Supply input: 230VAC/50Hz and 120VAC/60Hz 7.3 Conducted disturbance at mains port (Paycheck 4 Thermal Ticket Printer) References Test method used: CISPR 22 and ANSI C Test data Port under test AC input of external supply Results Refer to spectral plots and tables of this section. Observations/special notes The EUT was set up as table top configuration. Test equipment list Equipment Manufacturer Model No. Asset/Serial No. Next cal. 3 m EMI Test Chamber TDK SAC-3 FA May 06/09 International Power Supply California Inst. 3001i FA Jan. 13/10 50 Coax cable HUBER + SUHNER None FA Aug. 05/09 LISN Rohde & Schwarz ENV216 FA Sept. 02/09 Receiver/Spectrum Analyzer Rohde & Schwarz ESU 26 FA Dec. 16/09 Note: N/A = Not applicable, NCR = No cal required, COU = Cal on use Report reference ID: TRFEMC Page 18 of 34

19 Test name: Conducted disturbance at mains port (Paycheck 4 Thermal Ticket Printer) Test date: March 9, 2009 Test engineer: David Duchesne Supply input: 230VAC/50Hz and 120VAC/60Hz Spectral plots Level in dbµv CISPR 22 Voltage on Mains QP Class B CISPR 22 Voltage on Mains AV Class B 0 150k M 2M 3M 4M 5M M 20M 30M Frequency in Hz 120VAC/60Hz, Phase (Paycheck 4 Ticket Printer) CISPR 22 QP Class B Limit CISPR 22 AV Class B Limit Preview Peak Detector Preview Average Detector The spectral scan has been corrected with transducer factors (i.e. cable loss, LISN factors, and attenuators) for determination of compliance. A preview measurement was generated with the receiver in continuous scan mode Emissions detected within 6 db or above limit were remeasured with the appropriate detector against the correlating limit and recorded as the final measurement. Receiver/Spectrum analyzer settings: 0.15 MHz to 30 MHz Preview measurements Final measurement Receiver: 9 khz RBW, Peak and Average detector, max hold Receiver: 9 khz RBW, Quasi-peak and Average detector Measurement time 100ms Report reference ID: TRFEMC Page 19 of 34

20 Test name: Conducted disturbance at mains port (Paycheck 4 Thermal Ticket Printer) Test date: March 9, 2009 Test engineer: David Duchesne Supply input: 230VAC/50Hz and 120VAC/60Hz Spectral plots, continued Level in dbµv CISPR 22 Voltage on Mains QP Class B CISPR 22 Voltage on Mains AV Class B 0 150k M 2M 3M 4M 5M M 20M 30M Frequency in Hz 120VAC/60Hz, Neutral (Paycheck 4 Ticket Printer) CISPR 22 QP Class B Limit CISPR 22 AV Class B Limit Preview Peak Detector Preview Average Detector The spectral scan has been corrected with transducer factors (i.e. cable loss, LISN factors, and attenuators) for determination of compliance. A preview measurement was generated with the receiver in continuous scan mode Emissions detected within 6 db or above limit were remeasured with the appropriate detector against the correlating limit and recorded as the final measurement. Receiver/Spectrum analyzer settings: 0.15 MHz to 30 MHz Preview measurements Final measurement Receiver: 9 khz RBW, Peak and Average detector, max hold Receiver: 9 khz RBW, Quasi-peak and Average detector Measurement time 100ms Report reference ID: TRFEMC Page 20 of 34

21 Test name: Conducted disturbance at mains port (Paycheck 4 Thermal Ticket Printer) Test date: March 9, 2009 Test engineer: David Duchesne Supply input: 230VAC/50Hz and 120VAC/60Hz Spectral plots, continued Level in dbµv CISPR 22 Voltage on Mains QP Class B CISPR 22 Voltage on Mains AV Class B 0 150k M 2M 3M 4M 5M M 20M 30M Frequency in Hz 230VAC/50Hz, Phase (Paycheck 4 Ticket Printer) CISPR 22 QP Class B Limit CISPR 22 AV Class B Limit Preview Peak Detector Preview Average Detector Final Q-Peak Detector Final Average Detector The spectral scan has been corrected with transducer factors (i.e. cable loss, LISN factors, and attenuators) for determination of compliance. A preview measurement was generated with the receiver in continuous scan mode Emissions detected within 6 db or above limit were remeasured with the appropriate detector against the correlating limit and recorded as the final measurement. Receiver/Spectrum analyzer settings: 0.15 MHz to 30 MHz Preview measurements Final measurement Receiver: 9 khz RBW, Peak and Average detector, max hold Receiver: 9 khz RBW, Quasi-peak and Average detector Measurement time 100ms Tabular Data Frequency Q-Peak Result Meas. Time Bandwidth Correction Margin Limit Filter Conductor (MHz) (dbµv) (ms) (khz) (db) (db) (dbµv) On L On L Frequency Average Result Meas. Time Bandwidth Correction Margin Limit Filter Conductor (MHz) (dbµv) (ms) (khz) (db) (db) (dbµv) On L On L Note: Correction factor includes cable loss, LISN, and attenuator. Report reference ID: TRFEMC Page 21 of 34

22 Test name: Conducted disturbance at mains port (Paycheck 4 Thermal Ticket Printer) Test date: March 9, 2009 Test engineer: David Duchesne Supply input: 230VAC/50Hz and 120VAC/60Hz Spectral plots, continued Level in dbµv CISPR 22 Voltage on Mains QP Class B CISPR 22 Voltage on Mains AV Class B 0 150k M 2M 3M 4M 5M M 20M 30M Frequency in Hz 230VAC/50Hz, Neutral (Paycheck 4 Ticket Printer) CISPR 22 QP Class B Limit CISPR 22 AV Class B Limit Preview Peak Detector Preview Average Detector Final Q-Peak Detector Final Average Detector The spectral scan has been corrected with transducer factors (i.e. cable loss, LISN factors, and attenuators) for determination of compliance. A preview measurement was generated with the receiver in continuous scan mode Emissions detected within 6 db or above limit were remeasured with the appropriate detector against the correlating limit and recorded as the final measurement. Receiver/Spectrum analyzer settings: 0.15 MHz to 30 MHz Preview measurements Final measurement Receiver: 9 khz RBW, Peak and Average detector, max hold Receiver: 9 khz RBW, Quasi-peak and Average detector Measurement time 100ms Tabular Data Frequency Q-Peak Result Meas. Time Bandwidth Correction Margin Limit Filter Conductor (MHz) (dbµv) (ms) (khz) (db) (db) (dbµv) On N On N Frequency Average Result Meas. Time Bandwidth Correction Margin Limit Filter Conductor (MHz) (dbµv) (ms) (khz) (db) (db) (dbµv) On N On N On N Note: Correction factor includes cable loss, LISN, and attenuator. Report reference ID: TRFEMC Page 22 of 34

23 Test name: Conducted disturbance at mains port (Paycheck 4 Thermal Ticket Printer) Test date: March 9, 2009 Test engineer: David Duchesne Supply input: 230VAC/50Hz and 120VAC/60Hz Setup photos Report reference ID: TRFEMC Page 23 of 34

24 Test name: Conducted disturbance at mains port (Paycheck 3 Thermal Ticket Printer) Test date: June 14, 2006 Test engineer: Sumeet Bhalla Supply input: 230VAC/50Hz and 120VAC/60Hz 7.4 Conducted disturbance at mains port (Paycheck 3 Thermal Ticket Printer) References Test method used: CISPR 22 and ANSI C Test data Port under test AC input of external supply Results Refer to spectral plots and tables of this section. Observations/special notes The EUT was set up as table top configuration. Test equipment list Equipment Manufacturer Model No. Asset/Serial No. Next cal. LISN EMCO 4825/2 FA Jan. 30/07 Spectrum Analyzer Hewlett-Packard 8566B FA May 18/07 Spectrum Analyzer Display Hewlett-Packard 85662A FA May 18/07 Receiver Rohde & Schwarz ESHS 10 FA Feb. 17/07 Transient Limiter Hewlett-Packard A FA June 09/07 Note: N/A = Not applicable, NCR = No cal required, COU = Cal on use Report reference ID: TRFEMC Page 24 of 34

25 Test name: Conducted disturbance at mains port (Paycheck 3 Thermal Ticket Printer) Test date: June 14, 2006 Test engineer: Sumeet Bhalla Supply input: 230VAC/50Hz and 120VAC/60Hz Spectral plots Plots were generated with a peak detector. Spectral plots have been corrected with cable, LISN, and attenuator losses to show compliance with the average limit. Report reference ID: TRFEMC Page 25 of 34

26 Test name: Conducted disturbance at mains port (Paycheck 3 Thermal Ticket Printer) Test date: June 14, 2006 Test engineer: Sumeet Bhalla Supply input: 230VAC/50Hz and 120VAC/60Hz Spectral plots, continued Plots were generated with a peak detector. Spectral plots have been corrected with cable, LISN, and attenuator losses to show compliance with the average limit. Report reference ID: TRFEMC Page 26 of 34

27 Test name: Conducted disturbance at mains port (Paycheck 3 Thermal Ticket Printer) Test date: June 14, 2006 Test engineer: Sumeet Bhalla Supply input: 230VAC/50Hz and 120VAC/60Hz Spectral plots, continued Plots were generated with a peak detector. Spectral plots have been corrected with cable, LISN, and attenuator losses to show compliance with the average limit. Report reference ID: TRFEMC Page 27 of 34

28 Test name: Conducted disturbance at mains port (Paycheck 3 Thermal Ticket Printer) Test date: June 14, 2006 Test engineer: Sumeet Bhalla Supply input: 230VAC/50Hz and 120VAC/60Hz Spectral plots, continued Plots were generated with a peak detector. Spectral plots have been corrected with cable, LISN, and attenuator losses to show compliance with the average limit. Report reference ID: TRFEMC Page 28 of 34

29 Test name: Conducted disturbance at mains port (Paycheck 3 Thermal Ticket Printer) Test date: June 14, 2006 Test engineer: Sumeet Bhalla Supply input: 230VAC/50Hz and 120VAC/60Hz Tabular data Receiver Results: 120V/60Hz Conductor Frequency Emission Level Cable Loss Result Limit Margin Detector LISN Loss (db) (MHz) (dbuv) (db) (dbuv) (dbuv) (db) Quasi Peak Average Quasi Peak Average Phase Quasi Peak Average Quasi Peak Average Quasi Peak Average Quasi Peak Average Quasi Peak Average Quasi Peak Average Quasi Peak Average Neutral Quasi Peak Average Quasi Peak Average Quasi Peak Average Quasi Peak Average Report reference ID: TRFEMC Page 29 of 34

30 Test name: Conducted disturbance at mains port (Paycheck 3 Thermal Ticket Printer) Test date: June 14, 2006 Test engineer: Sumeet Bhalla Supply input: 230VAC/50Hz and 120VAC/60Hz Tabular data, continued Receiver Results: 230V/50Hz Conductor Frequency Emission Level Cable Loss Result Limit Margin Detector LISN Loss (db) (MHz) (dbuv) (db) (dbuv) (dbuv) (db) Quasi Peak Average Quasi Peak Average Quasi Peak Average Quasi Peak Average Phase Quasi Peak Average Quasi Peak Average Quasi Peak Average Quasi Peak Average Quasi Peak Average Quasi Peak Average Quasi Peak Average Quasi Peak Average Quasi Peak Average Neutral Quasi Peak Average Quasi Peak Average Quasi Peak Average Quasi Peak Average Quasi Peak Average Quasi Peak Average Report reference ID: TRFEMC Page 30 of 34

31 Test name: Conducted disturbance at mains port (Paycheck 3 Thermal Ticket Printer) Test date: June 14, 2006 Test engineer: Sumeet Bhalla Supply input: 230VAC/50Hz and 120VAC/60Hz Setup photos Report reference ID: TRFEMC Page 31 of 34

32 Section 8: EUT photos Nemko Canada Inc., Section 8: EUT photos Paycheck Desktop top view Report reference ID: TRFEMC Page 32 of 34

33 Section 8: EUT photos Nemko Canada Inc., Paycheck Desktop front view Report reference ID: TRFEMC Page 33 of 34

34 Section 8: EUT photos Nemko Canada Inc., Paycheck Desktop side view Report reference ID: TRFEMC Page 34 of 34