Diameter Range. GA-4101 Gage
|
|
- Morgan Greene
- 7 years ago
- Views:
Transcription
1 Gages and Accessories,37 mm 30,8 mm.05".0" FAST EASY ACCURATE-gages and settg fixtures. Gage s and Ps All Sunnen Dial Bore Gages read out,00 mm (or.000")* and feature all-carbide gagg pots, wear-proof ball crank, and adjustable centralizers. Each gage comes packed its own sturdy box with all tools and wrenches required for setup and adjustment. *(,00 mm [.0005"] readg gages are also available. Contact Customer Service for price and availability.) Model CF- Settg Fixture, shown with GR- Gage. Model CF-50 Settg Fixture with CF-50 size settg adapter for use as shown with GR-0 Gage. Model CF-50 Settg Fixture, shown with GR- Gage. s and ps must be ordered separately. Diameter ranges, gagg depths and part numbers are listed below. and Matchg Ps For GRM/GR-0 (order separately) GRM/GR-0 Dial Bore Gage,37 mm 3, mm {.05".535"} Assembly consists of a,00 mm readg dicator, probe retractor and probe retaer bushg a reforced nylon sulatg shroud. Order GR-0 for.000" readg. : kg ( lbs.) GR-9 Gage GA-0 Gage mm mm mm,37 -,55,50 -,90 0 -,0,05 -,5,5-5,50-3,00 5-3,5 3,00-3,50 3,5-35 3,50 -, ,5,0 -,80 0-5,30 5,0-5, ,30,0 -,80 0-7,30 7,0-7, ,30 8,0-8, ,30 9,0-9,80 9,0-0,0 0,0 -,0,0 -,0,0-3, G-055 G-070 G-080 G-090 G-00 G-0 G-0 G-30 G-0 G- G-0 G-00 G-0 G-0 G-0 G-80 G- G-30 G-30 G-00 G-0 G-80 P G-037 G-059 G-089 G G-5A and P Storage Case
2 GR-0 Dial Bore Gage Accessories Extension* Available for probes 8, mm (.33") or larger. extensions are 3,5 mm ( / ") long, and up to three can be assembled together. : KZX Bld Hole s and Ps Order standard probe and transfer p number and add -KZ0X to number. Example: G-0-KZ0X. Note: G-055 probe and G-037 transfer p not available bld hole configuration. Available weeks after receipt of order. Carbide Inserted Gage s and Ps For applications where gage pots are exposed to extreme wear conditions such as heavy production, rough workpieces or abrasive materials. Not available sizes smaller than, mm (.5"). Order standard probe and transfer p number and add -KY5X to number. Example: G-0-KY5X. Available - weeks after receipt of order. Kits kits to cover the more popular diameters are available as listed below. Both kits are supplied a hged, nested box. G-305 Kit Consists of 5 probes and transfer ps. Covers a contuous diameter range from, mm- 3, mm (.5"-.535"). :, kg (.5 lb.) G-00 G-0 G-0 G-0 G-80 G- G-30 G-30 G-00 G-0 G-80 mm,0/,80 0/5,30 5,0/5,80 50/,30,0/,80 0/7,30 7,0/7,80 70/8,30 8,0/8,80 80/9,30 9,0/9,80 9,0/0,0 0,0/,0,0/,0,0/3,0 G-3050 Kit Consists of probes and matchg transfer ps which cover a, mm-3, mm (.5"-.535") diameter range on even /" crements. :, kg (.5 lb.) G-0 G-0.5/.89.85/.09.05/.8./.8./.8./.87.83/ /.37.33/.3.33/.3.3/ /.7.09/.57.9/.9./.535 mm,0/,80,0/,80 70/8,30 9,0/9,80 0,0/,0,0/3,0.5/.89./.8.303/.37.3/.38.09/.57./.535 P G- P G- Right Angle Attachment* Available for special conditions where it is difficult to read the gage or the total gage height causes a problem. : KZX-90. *Standard CF-50 Settg Fixture nest does not work with these accessories. Alternative methods of settg size must be used. Available weeks after receipt of order. CF-50 Size Settg Adapter Centers gage probes between parallel reference surfaces on CF-50 Settg Fixture. Serves as an extra pair of hands to help nullg the gage on both the horizontal and vertical axis. Assures fast, accurate setup of the gage. : kg ( lbs.) Settg Fixtures CF-50M (metric),37 mm-50,8 mm CF-50 (ch).05"-.00" For use with 0, 000, 000, and 9000 Series Dial Bore Gages. CF-50M comes with 0-5 mm micrometer head marked,00 mm crements with precision lapped carbide anvils. Includes a rg gage checkg standard and three terchangeable nests. (Use of CF-50M/CF-50 with 0 series gage requires the purchase of CF-50 Size Settg Adapter.) Settg Master has a rugged, stress-relieved cast-iron base and may be used without removg it from its protective case. CF-50 is equipped with a 0"-" micrometer head marked.000" crements. CF-50M/CF-50 :,5 kg (0 lbs.) Replacement Gage Nests For CF-50M Metric & CF50: CF-50M, mm-9, mm 8,8 mm-30, mm 30,0 mm-50,0 mm CF-50 CF-550A.95"-.750" CF-50A.70"-.9" CF-570A.8"-.00" CF-37 Micrometer Adjustg Wrench CF-38 Spdle Lock Knob CF-5A Magnifier CF-57A Calibration Rg Shown with CF-50 Settg Fixture. 5
3 GAM/GA-000 Series Gages, mm 9,0 mm {.95".750"} Non-retractable gage with,00 mm metric or (.000") readg dicator. Capable of measurg to with 5,0 mm (.00") of the bottom of a bld hole. Electronic SPC dial bore gages listed on page 9. Indicators readg,00 mm or.0005" are available on special order. Replacement s For GAM/GA-000 Series Gages: G-75MA Quick Settg Wrench (Metric readg) G-75A Quick Settg Wrench (Inch readg) G-85A Indicatg Ball Removal Tool G-89A Indicatg Fger Clamp PBR-505A Indicatg Ball (/" Diameter Carbide) G-A Centralizer Pots (Package of ) G-MA # Pot Assembly (metric), mm- mm diameter G-A # Pot Assembly (ch).95"-.580" diameter G-MA # Pot Assembly (metric) mm-,9 mm diameter G-A # Pot Assembly (ch).580"-.5" diameter G-3MA #3 Pot Assembly (metric),9 mm-9,0 mm diameter G-3A #3 Pot Assembly (ch).5"-.750" diameter GAM-05 GAM-0 GAM- GA-05 GA-0 GA / / 9 3 / 3 / GRM/GR-000 Series Gages 8,8 mm 30, mm {.70".90"} Retractable gage with,00 mm metric or (.000") readg dicator. Capable of measurg to with,8 mm (.70") of the bottom of a bld hole. Electronic SPC dial bore gages listed on page 9. Indicators readg,00 mm or.0005 are available on special order. Replacement s For GRM/GR-000 Series Gages G-375MA Quick Settg Wrench (Metric readg) G-375A Quick Settg Wrench (Inch readg) G-385A Indicatg Ball Removal Tool G-389A Indicatg Fger Clamp PBR-50A Indicatg Ball (3/3" Diameter Carbide) G-37A Centralizer Pots (Package of ) G-3MA # Pot Assembly (metric) 8,8 mm-, mm diameter G-3A # Pot Assembly (ch.70"-.890" diameter G-3MA # Pot Assembly (metric), mm-, mm diameter G-3A # Pot Assembly (ch).890"-.0" diameter G-33MA #3 Pot Assembly (metric), mm-30, mm diameter G-33A #3 Pot Assembly (ch).0"-.9" diameter GRM-07 GRM- GRM- GR-07 GR- GR- 3 / / / 7 / Special Dial Bore Gages are available on a special order basis. GA/GAM- 000 Indicator cannot be peaked at lengths longer than 75 mm (7") therefore gage accuracy To order special length dial bore gages, specify as follows: GA/GAM-_X. The _ is the desired gagg length multiplied by ( ches). Available weeks after receipt of order. CF-50 Settg Fixture Metric version CF-50M has a 0 to 5 mm Micrometer head marked,00 mm crements. Supplied a sturdy, nested box. CF-50 for.05" to.000" diameters is equipped with a large micrometer head with range of 0" to " marked.000" crements. Special Dial Bore Gages are available on a special order basis. GR/GRM-000 Indicator cannot be peaked at lengths longer than 305 mm (") therefore gage accuracy To order special length dial bore gages, specify as follows: GR/GRM- _X. The _ is the desired gagg length multiplied by ( ches). Available weeks after receipt of order. Shown with GR- Gage.
4 GRM/GR-9000 Series Gages GAM/GA-000 Series Gages (Non-Retractable) GRM/GR-000 Series Gages (Retractable) 30,0 mm 50,8 mm {.8".0"} 50 mm mm {.0".0"} Retractable gage with,00 mm metric or (.000") readg dicator. Capable of measurg to with Non-retractable gage with,00 mm metric or (.000") 8,5 mm (.335") of the bottom of a bld hole. readg dicator. Capable of measurg to with 3 mm Electronic SPC dial bore gages listed on page 8. (.500") of the bottom of a bld hole. Electronic SPC Indicators readg,00 mm or,0005" are dial bore gages listed on page 9. Indicators readg available on special order.,00 mm or.0005" available on special order. Replacement s For GRM/GR-9000 Series Gages: G-75MA Quick Settg Wrench (Metric readg) G-75A Quick Settg Wrench (Inch readg) G-85A Indicatg Ball Removal Tool G-89A Indicatg Fger Clamp PBR-503A Indicatg Ball (/8" Diameter Carbide) G-7A Centralizer Pots (Package of ) G-MA # Pot Assembly (metric) 30,0 mm-35, mm diameter G-A # Pot Assembly (ch).8"-.385" diameter G-MA # Pot Assembly (metric) 35, mm-0, mm diameter G-A # Pot Assembly (ch).385"-9" diameter G-3MA #3 Pot Assembly (metric) 0, mm-5, mm diameter G-3A #3 Pot Assembly (ch) 9"-.795" diameter G-MA # Pot Assembly (metric) 5, mm-50,8 mm diameter G-A # Pot Assembly (ch).795"-.0" diameter GRM-907 GRM-9 GRM-9 GR-907 GR-9 GR-9 3 / / 3 / 7 3 / Special Dial Bore Gages are available on a special order basis. GR/GRM-9000 Indicator cannot be peaked at lengths longer than 35 mm (5") therefore gage accuracy To order special length dial bore gages, specify as follows: GR/GRM-9_X. The _ is the desired gagg length multiplied by ( ches). Available weeks after receipt of order. Note: Sunnen 000 Series Dial Bore Gages can be extended to 30,8 mm (") by addg oversize centralizer pots and additional gage pot extensions. For gagg diameters the range of 5, mm-30,8 mm ("-") order: G-8A Gage Extension Kit. Consists of: Two Oversize Centralizer Pots, G-3A #7 Gage Pot Extension, G-3A #8 Gage Pot Extension. 000 Series Gages assembled with G-8A Gage extension set cannot be used with CF- settg fixture when set for diameters above 03, mm (8"). Alternative methods of settg gage must be used. *Available - weeks after receipt of order. Extension sleeves are available for convertg GAM/GA-000 Series Gages to different lengths. The followg extension sleeves are available: GA-03 Accessory Extension Sleeves 75 mm (3") GA-0 Accessory Extension Sleeves mm (") GA- Accessory Extension Sleeves mm (") GA- Accessory Extension Sleeves 00 mm (") Retractable gage with,00 mm metric or (.000") readg dicator. Capable of measurg to with 3 mm (.500") of the bottom of a bld hole. Electronic SPC dial bore gages listed on page 9. Indicators readg,00 mm or.0005" available on special order. *Furnished with metal case for accessories only. GAM-03 GAM-0 GAM- GAM-* GA-03 GA-0 GA- GA-* Replacement s For 000 Series Gages: PBR-503A Indicatg Ball (/8" Diameter Carbide) G-5A Centralizer Pots (Package of ) G-0A Indicatg Ball Removal Tool G-0A # Pot Assembly 50,8 mm-0,3 mm (.0"-.375") G-A # Pot Assembly 0,3 mm-9,8 mm (.375"-.750") G-A #3 Pot Assembly 9,8 mm-79, mm (.750"-3.5") G-3A # Pot Assembly 79, mm-,9 mm (3.5"-3.500") G-A #5 Pot Assembly,9 mm-98, mm (3.500"-3.750") G-5A # Pot Assembly 95,3 mm-07,9 mm (3.750"-.50") G-5A Gage Pot Assembly Ball Removal Tool G-38A Gage Pot Assembly Wrench Special Dial Bore Gages are available on a special order basis. 000 Series Indicators cannot be peaked at lengths longer than mm (5") therefore gage accuracy To order special length dial bore gages, specify as follows: G_-_X. The second _ is the desired gagg length ( ches). Available weeks after receipt of order. 7 GRM-0 GR-0 GRM- GR- GRM-* GR-*
5 Settg Fixtures CF-M (metric) CF- (ch) 5 mm 03 mm {.0" 8.0"} For use with 000 Series Dial Bore Gages. Makes gage settg fast and easy. Micrometer adjustment allows dialg sizes. A precision tool, shipped with convenient storage case. : 9,5 kg ( lbs.) LUX Series Electronic Dial Bore Gages Features Models + Special s. All 0, 000, 000, 000 Series Available Metric/Inch Conversion,00 mm or.000 Divisions Display Swivels 330 for any Position SPC Capability Preset, zero set, +/- direction and Go/No Go functions. Communicates with Sunnen GageTalker, Data Myte, Mitutoyo, or Personal Computers. Elimates micrometers and rg gages. Elimates errors and feel settg gages. Sets 000 Series gages seconds. Includes,00 mm (.000") micrometer head with precision lapped carbide anvils. Comes with a rg gage checkg standard and precision settg standards 5, mm (") crements. Settg Master has a rugged, stress-relieved, cast iron base. May be used without removg from its protective case. Settg Fixtures are shipped complete with settg standards to cover 50 mm-5, mm ("-") range. A settg standard is not required to measure the 78 mm-03 mm (7"-8") range. When measurg the 5 mm-78 mm ("- 7") range order: CF-30A 5-78 mm (metric) CF-0A "-7" (ch) CF-M Replacement Settg Standards: CF-30A* mm CF-330A* mm CF-30A* 00-5 mm CF-350A* 5- mm CF-30A 5-78 mm *Included with CF-M CF- Replacement Settg Standards: CF-0A* "-3" CF-30A* 3"-" CF-0A* "-5" CF-50A* 5"-" CF-0A "-7" *Included with CF- CF-5A CF-5A Magnifier Calibratg Rg Reach mm mm,37 mm-3, mm.05"-.535", mm-9,0 mm 8,8 mm-30, mm 30,0 mm-50,8 mm 50,0 mm- mm.95"-.750".70"-.90".8"-.0".0"-.0" *Refer to page for Selection and Reach formation. For formation on Special Electronic Dial Bore Gages, contact Customer Service Department. Accessories LUX-B Replacement Battery GR-0-LUX GA-05-LUX GA-0-LUX GA--LUX GR-07-LUX GR-LUX GR-LUX GR907-LUX GR-9-LUX GR9-LUX GA-03-LUX GA-0-LUX GA--LUX GR-0-LUX GR--LUX GR--LUX * * / / 3 / 3 CF-0A Adapter Kit This adapter kit required for early model CF-000 Settg Fixture so it can be used with the Sunnen CK-380 as well as the current 000 Series gages. (Included with all current CF- Units.) 8
DMS 680. Universal length measuring system gauge inspection for»iso 9000«requirements
DMS 680 Universal length measuring system gauge inspection for»iso 9000«requirements Universal length measuring system DMS 680 Wide range of applications For periodic inspection of gauges, reference gauges,
More informationRAPID DIAL TEST INDICATORS
RAPID DIAL TEST INDICATORS The Verdict Rapid presents the dial face inclined to the workpiece surface ensuring good visual accessibility obviating parallax error. Rapids incorporate a rear swivel spigot
More informationSCHMIDT ManualPress 300 Series Manual Presses with Process Monitoring
Manual Presses with Process Monitoring Process reliability, force/stroke monitoring of the joining process and EN ISO- compatible documentation of the results are becoming the major factors for small and
More informationMaraMeter. Indicating Snap Gages
- 9-2 MaraMeter. Indicating Snap Gages Overview MaraMeter. The Indicating Snap Gage is ideal for highly accurate and reliable results on cylindrical work pieces with a narrow tolerance. MaraMeter 840 F
More informationYUASA MILLING MACHINE ACCESSORIES & TOOLS
97 HORIZONTAL / VERTICAL 5C COLLET INDEX 550 series 2 YEAR WARRANTY Spindle is manufactured with a taper seat in body frame. Rapid opening and closing is performed with a level collet closer with a leverage
More informationMarStand. Indicator Stands Comparator Stands
MarStand. Indicator Stands Comparator Stands Indicator Stand 815 GN 6 2 Indicator Stand 2400 6 2 Indicator Stand 815 MA 6 3 Indicator Stand 815 MB 6 3 Indicator Stand 815 MG 6 4 Indicator Stand 815 P 6
More informationPrecision Vise Combinations
Precision Vise Combinations PanaVise vises and work holding tools have hundreds of uses limited only by your imagination! Each vise allows the head to Tilt, Turn & Rotate and position your work anywhere
More informationThe Speed of Live and the Accuracy of Fixed
The Speed of Live and the Accuracy of Fixed SG10A CYLINDER HEAD SEAT & GUIDE MACHINE Light Weight Work Head The SG10A has a light weight work head for fast and accurate centering for the minimum concentricity.
More informationSPECIAL FEATURES. Air- Electric Clutch Control. Extended Beds and Rams
, SPECIAL FEATURES Extended Beds and Rams Beds and rams can be extended at both ends or at one end only for closing or "homing" operations. Extensions at both ends of the machine provide greatly increased
More informationC O N V E Y O R C O M P O N E N T S C H A I N S B E L T S B E A R I N G S
C O N V E Y O R C O M P O N E N T S C H A I N S B E L T S B E A R I N G S January 2009 Issue 6 Valu Guide Brackets The Ultimate in Adjustability and Cost Savings Valu Guide brackets are part of a family
More informationABOVE AND BEYOND HONING. SV-2500 series PRECISION VERTICAL HONING SYSTEM
ABOVE AND BEYOND HONING SV-2500 series PRECISION VERTICAL HONING SYSTEM SUNNEN S SV-2500 SERIES: PRECISION, 3-AXIS Sunnen has long set the industry standard in creating complete solutions for precision
More informationMEASURING MACHINES. Pratt & Whitney METROLOGY LABORATORY. Measurement Systems, Inc.
METROLOGY LABORATORY Pratt & Whitney Measurement s, Inc. METROLOGY LABORATORY The Standard of Accuracy Pratt & Whitney Metrology Laboratory Machines are the standard of accuracy to which all other gages
More informationOperation Manual For NDJ-8S Digital Rotary Viscometer
Operation Manual For NDJ-8S Digital Rotary Viscometer 1 Contents 1. General... 2 2. Main technical data... 2 3. Working principle... 2 4. Installation... 3 5. Operation procedures... 4 6. Precautions...
More informationPrecision made in Europe. As per DIN 8606. The heart of a system, versatile and expandable.
1 von 9 Precision made in Europe. As per DIN 8606. The heart of a system, versatile and expandable. Main switch with auto-start protection and emergency off. Precision lathe chuck as per DIN 6386 (Ø 100mm).
More informationOverview. Milling Machine Fundamentals. Safety. Shop Etiquette. Vehicle Projects Machine Shop
Overview Milling Machine Fundamentals Wayne Staats, UW-Madison FSAE Safety Shop Etiquette Before Machining Indicating Calculating Feeds and Speeds Machining Maintenance Safety Respect the machines Common
More informationOPTICAL MEASURING MACHINES
OPTICAL MEASURIN MACHINES SYLVAC SCAN Dedicated to the fast and contactless measuring of cylindrical parts, our new SCAN machines are based on the principle of the scanner. This technique allows to reproduce
More informationTechCut 4 Precision Low Speed Saw
Product Brochure TechCut 4 Precision Low Speed Saw 3" - 6" Blade Range Digital Speed Display 1-Micron Sample Indexing Spring-Loaded Dressing Stick Attachment All Aluminum & Stainless Steel Construction
More informationRottler Multi-point Diamond Honing System
Rottler Multi-point Diamond Honing System Programmable Power Stroke Automatic diamond Honing Machine The new Rottler HP7A Cylinder Honing Machine employs the latest technology available for today s engine
More informationABOVE AND BEYOND HONING SV-15 VERTICAL HONING MACHINE
ABOVE AND BEYOND HONING SV-15 VERTICAL HONING MACHINE SUNNEN S SV-15 Vertical Honing MachiNE BuILT for precision and PerfORMANCE The Sunnen SV-15 is designed with power, precision, durability and advanced
More informationRL HW / RL HW+ / RL HGW / RL HV / RL HVPW/RL HVPW-G
Auto-Levelling Rotary Laser Level RL HW / RL HW+ / RL HGW / RL HV / RL HVPW/RL HVPW-G 77-496 / 77-429 / 77-439 / 77-497 / 77-427/ 77-441 Please read these instructions before operating the product Auto-Levelling
More informationPortable Hardness Tester
Portable Hardness Tester Large, easy to read display with backlight Highly accurate ± 4 HL Automatic correction for impact direction Converts to all common hardness scales (,,,, HS, R m ) Light weight
More informationSmartCut EVS Series CNC Mills Combination of CNC technology and manual capability SC EVS-350B CNC SC EVS-550B CNC
Summit Machine Tool Manufacturing L.L.C. SmartCut EVS Series CNC Mills Combination of CNC technology and manual capability SC EVS-350B CNC SC EVS-550B CNC Summit Machine Tool Manufacturing L.L.C. SmartCut
More informationPerformance racing and engine building machinery and equipment. Rottler Multi Point Diamond Honing System
Performance racing and engine building machinery and equipment Rottler Multi Point Diamond Honing System Rottler s Diamond Process Correct Abrasives The experience of having the most widely used diamond
More information1722 / 1723 / 1724 DIGI-MET Indicators
1722 / 172 / 1724 DIGI-MET Indicators for static measurements IP 52 1722 502 172 502 1724 502 Electronic functions Housing Ø 60 mm Replacement probe tip M 2.5 Protection class IP52 Clamping shank Ø 8 mm
More informationPowerLine Magnetic-Laser Sheave Alignment System Instructions
PowerLine Magnetic-Laser Sheave Alignment System Instructions The PowerLine Magnetic-Laser Sheave Alignment System laser aligns belts, pulleys, sheaves, sprockets, gear trains, rollers, platforms, conveyors,
More informationEasy Machining Center Setup
White Paper Document No. MWA-072-EN_01_1404 April 2014 Easy Machining Center Setup Using FANUC s Direct Input of Workpiece Origin Setting Measured and Tool Length Measurement features to easily establish
More informationTRUSTED SOLUTIONS AND INNOVATION CATALOG DIE SETS
www.danly.com TRUSTED SOLUTIONS AND INNOVATION CATALOG DIE SETS Quality & performance Quick delivery Precision Components www.danly.com CATALOG DIE SETS Service We Deliver and Quality You Can Depend On
More informationExternal Hones and Accessories
External s and Accessories O.D. Range: mm 5 mm.0".500" Honing Tools for Finishing External Diameters For low production tool room salvage maintenance. Recommended for almost any material, including hardened
More informationPERFORMANCE RACING AND ENGINE REMANUFACTURING MACHINERY AND EQUIPMENT. Rottler Multi Point Diamond Honing System
PERFORMANCE RACING AND ENGINE REMANUFACTURING MACHINERY AND EQUIPMENT Rottler Multi Point Diamond Honing System Rottler s Diamond Process Correct Abrasives Having the most widely used diamond system in
More informationDIGI-MET ELECTRONIC INDICATORS
DIGI-MET ELECTRONIC INDICATORS Featuring Direct RS232C Output And Swiss SYLVAC Electronics. A sophisticated non-contact linear measuring system... can be connected to any computer or printer with no interface
More informationSCS Directory Accreditation number: SCS 0115
International standard: ISO/IEC 17025:2005 Swiss standard: SN EN ISO/IEC 17025:2005 METRON SA Calibration Laboratory Via Luserte Sud 7 CH-6572 Quartino Head: Angelo Capone Responsible for MS: Angelo Capone
More informationLapping and Polishing Basics
Lapping and Polishing Basics Applications Laboratory Report 54 Lapping and Polishing 1.0: Introduction Lapping and polishing is a process by which material is precisely removed from a workpiece (or specimen)
More information1.1 It is the intention of Van-Rob Inc. to ensure that checking fixture vendors are adhering to this standard.
PROCEDURE # E233 Page 1 of 5 1.0 Purpose: 1.1 It is the intention of Van-Rob Inc. to ensure that checking fixture vendors are adhering to this standard. 1.2 Fixture sources shall refer to this rider for
More informationMachine devices, jig devices
Machine devices, jig devices 853 K0697 Rolled thread studs DIN 6379 Material: Tempered steel. KIPP Rolled thread studs DIN 6379 Order No. D L B1 B2 Approx. weight g Surface finish: Thread rolled. Class
More informationCHATILLON DG Series Mechanical Force Gauge. Operating Instructions
Instruction Manual NC002737 Feb 2003 Issue 1 CHATILLON DG Series Mechanical Force Gauge Operating Instructions The DG Series mechanical force gauge is ideal for a wide range of force testing applications.
More informationThickness Gauges. convex R 15 or R 40, flat 10 mm Ø, spherical
Thickness Gauges Technical Data for Metric Thickness Gauges Page Model Lifting Contact points Contact points mm mm mm device standard available on request 130 K 15 0.1 10 15 no 6.35 mm Ø flat Ø flat, 130
More informationMachine tools. Milling- and boring machines
Milling- and boring machines Milling- and boring machines Our family owned company develops and manufactures customized machines and designs machine tools based on work piece requirements successfully
More informationOEM Manual MODEL 2350 ELECTRONIC DUAL CYLINDER SCALE
OEM Manual MODEL 2350 ELECTRONIC DUAL CYLINDER SCALE Scaletron Industries, Ltd. Bedminster Industrial Park 53 Apple Tree Lane P.O. Box 365 Plumsteadville, PA 18949 USA Toll Free: 1-800-257-5911 (USA &
More informationIntroduction... 3 Setting the Combination... 4 Securing the DEFCON CL... 5 Locking the DEFCON CL to your Notebook Computer...
notebook security DEFCON CL cable lock USER GUIDE Visit our Website at www.targus.com Features and specifications subject to change without notice. 2006 Targus Group International, Inc. and Targus, Inc.
More informationHONING LATHE DUPLICATOR CUTTERS
Lay the flat face of the cutter or bit on the flat top surface of the hone with the rest of the cutter overhanging the edge. Rub the cutter or bit up and down the hone (Figure 24-44). Be sure to hold the
More informationAZEK Rail Install Guide
TRIM MOULDING DECK PORCH RAIL PAVERS AZEK Rail Install Guide Installing AZEK Rail with CableRail by Feeney... 1 Installing CableRail by Feeney for AZEK Rail... 7 Installing AZEK Rail Stairs with CableRail
More informationProfile Projector PH-3500
Optical Measuring Profile Projector PH-3500 Catalog No. E4155-172 Mitutoyo introduces the PH-3515F a series of profile projectors that will meet any optical measuring or inspection challenge your shop
More informationTA-A BED TYPE MILLING CENTRE
TA-A BED TYPE MILLING CENTRE TA-A BED TYPE MILLING CENTRE MILLING CENTRE HIGH CAPACITY IN A COMPACT MACHINE High stock removal capacity TA-A BED TYPE MILLING CENTRE 2 TA-A The TA-A milling centre is a
More informationSJ-201P/M PORTABLE SURFACE ROUGHNESS TESTER
CATALOG No. E4152-178 PORTABLE SURFACE ROUGHNESS TESTER Smart tool in the workshop PORTABLE SURFACE ROUGHNESS TESTER Large characters are displayed on the large easy-to-view LCD. Portable for easy measurement
More informationRadianceRail Installation Guide
RadianceRail Installation Guide Installing RadianceRail with CableRail by Feeney... 2 Installing CableRail by Feeney for RadianceRail... 7 Installing RadianceRail Stairs with CableRail by Feeney... 10
More informationCOMPACT. Drilling COMPACT
COMPACT Our latest machine development still produced here in our own factory. This machine combines all our previous experience and knowledge in building drilling machines but at a reduced cost base.
More informationPin & Vee Block Test Machine
Pin & Vee Block Test Machine Picture of the apparatus Used in Standard Test Methods ASTM Standards D 2670, D2626, D3233, D5620 Federal Test Methods FTM-791-3807.1, FTM-791-3812.1 Chrysler Corporation 461-C-84-01,
More informationPowers Controls TH 192 S Single Temperature Room Thermostat
Technical Instructions Document No. 155-065P25 TH 192-1 Powers Controls TH 192 S Single Temperature Room Thermostat 50 60 70 80 TH0355R1 70 80 POWERS Description The TH 192 S thermostats are proportional
More informationPS6500 Storage Arrays Rack Mount Instructions
PS6500 Storage Arrays Rack Mount Instructions Part Number: R724M Rev. A01 Copyright 2010 Dell, Inc. All rights reserved. Dell is a trademark of Dell, Inc. EqualLogic is a registered trademark. All trademarks
More informationProviding Answers For All Your Machine Tool Needs
Providing Answers For All Your Machine Tool Needs STANDARD FEATURES FANUC MXP-200FA CONTROL Spindle Features Body Structure POWERFUL 20 HP H / L SHIFTING SPINDLE MOTOR HARDENED & GROUND BOXWAY CONSTRUCTION
More informationSENTINEL SERIES MICRO-MATIC STUD DRIVER WITH TORQUE CONTROL
SERIES MICRO-MATIC STUD DRIVER WITH TORQUE CONTROL 1. Drives studs to pre-determined torque. 2. Prevents stud or part damage when driving to shoulder or bottom of hole. 3. Quick releasing, non-reversing
More informationCONTRACER CV-3100/4100 Series
Form Measurement Contour Measuring System CONTRACER CV-3100/4100 Series Catalog No. E4293-218 Next-generation manual Contour Measuring Machine delivers high accuracy, high drive speed and simplified CNC
More informationMilling and Machining Center Basics
Training Objectives After watching the video and reviewing this printed material, the viewer will gain knowledge and understanding of basic milling theories and procedures. In addition, the viewer will
More informationCONTROLTECH INDUSTRIAL TORQUE WRENCH
TOOLS AND SOLUTIONS FOR CRITICAL INDUSTRIES E R O M ES SIZLABLE! I AVA CONTROLTECH INDUSTRIAL WRENCH IN LESS TIME, WITH MORE ACCURACY AND CONTROL Snap-on ControlTech Industrial Electronic Torque Wrenches
More informationF-Series Camera Mounting Accessories
F-Series Camera Mounting Accessories Document Number: 427-0462-00-12 Version: 100 Issue Date: September 2010 2010. All rights reserved worldwide. FLIR Commercial Systems, Inc. 70 Castilian Drive Goleta,
More informationproduct manual HS-4210 HS-4210_MAN_09.08 Digital Static Cone Penetrometer
HS-4210_MAN_09.08 product manual HS-4210 Digital Static Cone Penetrometer Introduction This Manual covers the measurement of bearing capacity using the Humboldt Digital Static Cone Penetrometer (DSCP).
More informationLABMASTER. Pratt & Whitney UNIVERSAL MEASURING SYSTEM. Model 175. Measurement Systems, Inc.
Pratt & Whitney Measurement Systems, Inc. The Standard of Accuracy Laser-Based 175 is designed to provide the ultimate in user-friendly operation while delivering calibration-quality accuracy and reproducibility.
More informationPowers Controls TH 192 HC Heating/Cooling Room Thermostat
Powers Controls TH 192 HC Heating/Cooling Room Thermostat Technical Instructions Document No. 155-066P25 TH 192-2 50 60 70 80 70 TH0356R1 60 80 POWERS Description The TH 192 HC thermostats are proportional
More informationThe Bonelle Tool and Cutter Grinder
The Bonelle Tool and Cutter Grinder The grinder was constructed about 1987 and exhibited at the 89th Model Engineering exhibition where it was awarded a bronze medal (see ME Vol164 No 3868 page 273). Subsequently
More informationEngineering & Design: Coordinate Dimensioning
s e c t i o n Section Contents NADCA No. Format Page Frequently Asked Questions (FAQ) -2 1 Introduction -2 2 Section Objectives -3 3 Standard and Precision Tolerances -3 4 Production Part Technologies
More informationRack installation instructions
Rack installation instructions Review the documentation that comes with the rack cabinet for safety and cabling information. Before you install the server in a rack cabinet, review the following guidelines:
More informationPowerLine Magnetic-Laser Pulley Alignment System Instructions
MONARCH INSTRUMENT 15 COLUMBIA DRIVE AMHERST, NEW HAMPSHIRE 03031 PHONE: 603-883-3390 FAX: 603-886-3300 E-mail: sales@monarchinstrument.com Web site: www.monarchinstrument.com PowerLine Magnetic-Laser
More informationDUGARD. Machine Tools Since 1939. Dugard 700L Series Heavy Duty CNC Lathes. www.dugard.com
DUGARD Machine Tools Since 1939 Dugard 700L Series Heavy Duty CNC Lathes www.dugard.com Dugard 700L Heavy Duty CNC Lathe 2000, 3000 or 4000mm bed length Designed for easy and convenient operation The concave
More informationACCESSORIES. Radiant Heater Controller, with 3021 Radiant Heater: Stand-Alone Radiant Heater Controller, with 3021 Radiant Heater.
ACCESSORIES Radiant Heater Controller, with 3021 Radiant Heater: Stand-Alone Radiant Heater Controller, with 3021 Radiant Heater. Assembly A-8984 K~1200D, Temperature Controller: A 400 watt microprocessorbased
More informationPhone (800) 821-8010 Fax (330) 920-0972 e-mail sales@pdq-marlin.com
1 Table of ontents asic Information dvantages of Quick hange Tooling...2 dvantages of PDQ Quick hange...3 PDQ Shank & Series information...5 Master Holders Morse Taper Holders...6 Milling Machine Holders...7
More informationCatalogue. 2 Wheel Drive Tow Carts Model Part No Picture Description Packaging. www.helitowcart.com info@helitowcart.com +1.418.561.
Catalogue 2 Wheel Drive Tow Carts V90 151 0002 00 A Application: Economical version for R22, R44 & R66 only, on regular surfaces. Ideal for private owners that operate from local airport. With rigid arm
More information3D Work- and Welding Table D28. Innovative technology improved. Englisch English Version 7.0. Award winning design. D 28 ProfiLine
Englisch English Version 7.0 D28 ProfiLine meets the requirements of high-quality suppliers D 28 ProfiLine 3D Work- and Welding Table D28 Award winning design D28 ProfiLine meets the requirements of high-quality
More informationproduct manual 08.09 H-4210A PORTABLE STATIC CONE PENETROMETER
08.09 product manual H-4210A PORTABLE STATIC CONE PENETROMETER PORTABLE STATIC CONE PENETROMETER GENERAL INFORMATION The H-4210A Static Cone Penetrometer is an unparalleled device for measuring soil consistency.
More informationTipping Bucket Rain Gauge Models 6011-A 6011-B
Tipping Bucket Rain Gauge Models 6011-A 6011-B User s Manual 1165 National Drive Sacramento, CA 95834 800.824.5873 Table of Contents General Information... 1 Introduction... 1 Installation General... 2
More informationMeasurement of Length, Mass, Volume and Density
Measurement of Length, Mass, Volume and Density Experimental Objective The objective of this experiment is to acquaint you with basic scientific conventions for measuring physical quantities. You will
More informationTL-Series Sub-Spindle Operator s Addendum
3 4 5 11 9 TL-Series Sub-Spindle Operator s Addendum 2 1 12 10 6 7 8 20HP VECTOR DUAL DRIVE LIVE TOOLING SUB SPINDLE 2008 Haas Automation, Inc. 96-0037 rev L 9/08 1 1. Introduction Specific M codes are
More informationSIMPLEX UNICAN LOCKS CHANGING THE CODE / COMBINATION 900 Series 1000 Series L1000 Series LP1000 Series EE1000 Series 2000 Series 2015 Series
SIMPLEX UNICAN LOCKS CHANGING THE CODE / COMBINATION 900 Series 1000 Series L1000 Series LP1000 Series EE1000 Series 2000 Series 2015 Series 2400/2500 Series 3000 Series 3100 Series Simplex 5000 Series
More informationStructural Holding System
Structural Holding System Users Manual November 2013 by Vehicle Service Group. All rights reserved. CO8812.1 502071 Rev. - 11/21/2013 CHIEF'S LIMITED ONE-YEAR WARRANTY & LIABILITY Chief Automotive Technologies
More informationFixturing systems Fixturing systems for measurement technology
Fixturing systems Fixturing systems for measurement technology Innovations and new additions to range Sets Spannfix Eco complete set The set contains different supports, extension elements and stop units.
More informationProduct Overview 9100D
Product Overview 9100D Portable Shaker Vibration Calibrator The Modal Shop 3149 East Kemper Road Cincinnati, OH 45241 Phone: +1.513.351.9919 Fax: 513.458.2171 info@modalshop.com Brief Overview We've taken
More informationHow To Test A Rockwell Type Hardness Tester
ROCKWELL TYPE HARDNESS TESTER CV-600A TM Ready-to-test analogue Rockwell type tester with lever system for direct load application Basic regular Rockwell type tester offering accuracy, reliability and
More informationQTA Series. Torque Reaction Arms
QTA Series Torque Reaction Arms See and feel the difference of Bench-mounted torque arms There s a lot riding on the quality of your assemblies, regardless of your manufacturing process. People are counting
More informationEQUIPMENT LIST. CNC MACHINING CENTERS (12 Machining Centers)
EQUIPMENT LIST CNC MACHINING CENTERS (12 Machining Centers) 5: Mazak V-414/32 with M-32 CNC control and integral two pallet flexible manufacturing module.this state of the art machining center along with
More informationPowers Controls Free Energy Band TH 193 HC Heating/Cooling Room Thermostat
Document No. 155-068P25 TH 193-4 Powers Controls Free Energy Band TH 193 HC Heating/Cooling Room Thermostat 50 60 70 80 70 TH0356R1 60 80 POWERS Description The TH 193 HC thermostats are proportional dual
More information880 HYDRAULIC BENDER
OPERATION, SERVICE AND PARTS INSTRUCTION MANUAL 880 HYDRAULIC BENDER Read and understand this material before operating or servicing this tool. Failure to understand how to safely operate this tool could
More informationDUGARD. Machine Tools Since 1939. Dugard 400 Slant Bed High Precision CNC Lathe. www.dugard.com
DUGARD Machine Tools Since 1939 Dugard 400 Slant Bed High Precision CNC Lathe www.dugard.com Superb Performance, Maximum Stability, Maximum Reliability Precision, Power and Capacity Make the Dugard 400
More information9200 9600 Electro. 8700 8600 Electro FEATURES 2700
STRINGING MACHINES 8700 9600 9200 9800 8700 E Six-point, hold-down mounting system. Stationary side-support arms, 4 individually adjustable V-shaped shoulder supports Universal V-shaped side supports handle
More informationNo. 57 Receiver Sight No. 57 SML Receiver Sight No. 66 Receiver Sight
No. 57 Receiver Sight No. 57 SML Receiver Sight No. 66 Receiver Sight MOUNTING AND ADJUSTING MOUNTING LYMAN NO 57 RECEIVER SIGHT The No. 57 Sight is designed primarily for rifles with round receivers.
More informationAMF112 (6904-002010 <00>) 13mm (1/2 in.)
AMF112 () Concrete Wood 13mm (1/2 in.) 5.5mm (7/32 in.) 10mm (3/8 in.) Sanus Systems 2221 Hwy 36 West Saint Paul, MN 55113 USA Customer Service Americas: 800-359-5520 651-484-7988 info@sanus.com Europe,
More informationThe tablesaw may be your shop s most valuable cutting. Crosscut Sleds. Foolproof. Innovative approach guarantees perfect results
Foolproof Crosscut Sleds Innovative approach guarantees perfect results B Y A L A N T U R N E R The tablesaw may be your shop s most valuable cutting tool, but for precise, repeatable crosscuts it needs
More informationNOT SEARCHING, BUT FINDING
NOT SEARCHING, BUT FINDING We carefully ensure that our wide and extensive range provides a good assortment so that you feel in good hands, even if you are looking for portable measurement devices to provide
More information413 NOVA SYSTEM PAN AMERICAN TOOL CORPORATION 5990 NW 33309-2208 PHONE (954)735-8665 TOLL FREE 1-800-423-2764 FAX
413 NOVA SYSTEM 5990 NW 31st Avenue Ft. Lauderdale, Florida 33309-2208 PHONE (954)735-8665 TOLL FREE 1-800-423-2764 FAX (954)735-8668 2013 Pan American Tool Corporation 2013 TERMS AND CONDITIONS TERMS:
More informationMilling & Machining Centers
Training Objective After watching the program and reviewing this printed material, the viewer will gain knowledge and understanding of basic milling theories and procedures. In addition, the viewer will
More informationUnmatched Metal Hardness Testing
Unmatched Metal Hardness Testing The Equostat 3 hardness tester can be connected both to the portable Equotip 3 platform and directly to a PC, with graphic user guidance Hardness Measurements made easy
More informationSlides and Drawers. The right collection
Slides and Drawers The right collection 1Technical Details Drawer Runners Carrying capacity Kg. Static load Dynamic load Pag. 01 Concealed Runners Excel N Excel N Excel N Excel N650 Excel N Excel PlugIn,
More informationWARNING! DO NOT ATTEMPT TO INSTALL THIS KIT IN A POWERED CONVEYOR.
Model: Document Number: 64058111 Kit Number: 64058112 Revision: 02 Description: Release Date: 04/08 Introduction This kit allows a PS90 scale to be integrated into a standard gravity conveyor. The kit
More informationMT90 Series MicroHardness Traverse Testing System
MT90 Series MicroHardness Traverse Testing System A Unique System with Unrivaled Speed And Accuracy in Case Depth Measurement. MT90 Microhardness Traverse Testing System Unrivaled Speed And Accuracy in
More informationELLIOTT COLLET STYLE Baffle Expander With Hydraulic Power Supply
TM-37 07-29-04 Elliott offers a complete line of precision tube tools, including: tube expanders Boiler Expanders Heat Exchanger Expanders Condenser Expanders Refinery Expanders tube rolling motors & torque
More informationSprutCAM is a CAM system for NC program generation for machining using multi-axis milling, turning, turn/mill, Wire EDM numerically controlled
SprutCAM is a CAM system for NC program generation for machining using multi-axis milling, turning, turn/mill, Wire EDM numerically controlled machines and machining centers. The system enables the creation
More informationHome"" """"> ar.cn.de.en.es.fr.id.it.ph.po.ru.sw
Home"" """"> ar.cn.de.en.es.fr.id.it.ph.po.ru.sw Milling of Grooves, Elongated Slots and Break-throughs - Course: Techniques for machining of material. Trainees' handbook of lessons (Institut fr Berufliche
More information40-6680 5 Beam Laser Pointer Service Manual
40-6680 5 Beam Laser Pointer Service Manual Contents Item Description Pages 1.0 Introduction 2 2.0 Overall Instrument Dis-assembly 2 2.1 Body module Dis-assembly 3 2.2 Core Module Dis-Assembly 4-5 2.3
More information3D laser removal and texturing in a new dimension
www.dmgmori.com LASERTEC 45 Shape 3D material removal by laser Laser texturing LASERTEC 45 Shape 3D laser removal and texturing in a new dimension LASERTEC LASERTEC 45 Shape: High-precision 3D laser removal
More informationINTERNATIONAL HOCKEY FEDERATION PERFORMANCE REQUIREMENTS AND TEST PROCEDURES FOR HOCKEY BALLS. Published: April 1999
INTERNATIONAL HOCKEY FEDERATION PERFORMANCE REQUIREMENTS AND TEST PROCEDURES FOR HOCKEY BALLS Published: April 1999 CONTENTS 1 Introduction 2 Test Procedures General 3 Standards and Specific Test Procedures
More informationEXTeRUS. EXTeRUS - With patented design, able to join technology. and quality of materials with a charming shape. Unique
EXTeR US G L A S S - With patented design, able to join technology and quality of materials with a charming shape. Unique thanks to its outstanding loading capability with 150 kg maximum weight and height
More informationOD 1401 9 PRECISION MEASURING INSTRUMENTS
SUBCOURSE EDITION OD 1401 9 PRECISION MEASURING INSTRUMENTS PRECISION MEASURING INSTRUMENTS SUBCOURSE OD1401 EDITION 9 Unites States Army Combined Arms Support Command Fort Lee, VA 23801-1809 5 CREDIT
More information