Fuse base with fusible link

Transcription

1 Fuse base with fusible link Series 851 Operating instructions Additional languages

2 General Information Contents 1 General Information Manufacturer Information regarding the operating instructions Further documents Conformity with standards and regulations...3 Explanation of the symbols Symbols in these operating instructions...3. Warning notes....3 Symbols on the device... 3 Safety notes Operating instructions storage Safe use Modifications and alterations...5 Function and device design Function Technical data... Transport and storage Mounting and installation Dimensions / fastening dimensions Mounting / dismounting, operating position Electrical Connection Commissioning Maintenance and repair Maintenance Cleaning Maintenance Repair Returning the device Disposal Accessories and Spare parts General Information 1.1 Manufacturer R. STAHL Schaltgeräte GmbH Am Bahnhof Waldenburg Germany Phone: Fax: Internet: info@stahl.de 1. Information regarding the operating instructions ID-No.: 195 / Publication Code: BA00 III en 0 Fuse base with fusible link 195 / Series BA00 III en 0

3 1.3 Further documents Data sheet 851 For further languages, see 1. Conformity with standards and regulations See certificates and EC Declaration of Conformity: Explanation of the symbols.1 Symbols in these operating instructions Symbol Meaning Tips and recommendations on the use of the device General danger Danger due to explosive atmosphere Danger due to energised parts Explanation of the symbols 195 / BA00 III en 0 Fuse base with fusible link Series 851 3

4 Safety notes. Warning notes Warning notes must be observed under all circumstances, in order to minimize the risk due to construction and operation. The warning notes have the following structure: Signalling word:, WARNING, CAUTION, NOTICE Type and source of danger/damage Consequences of danger Taking countermeasures to avoid the danger/damage Danger to persons Non-compliance with the instruction results in severe or fatal injuries to persons..3 Symbols on the device WARNING Danger to persons Non-compliance with the instruction can result in severe or fatal injuries to persons. CAUTION Danger to persons Non-compliance with the instruction can result in light injuries to persons. NOTICE Avoiding material damage Non-compliance with the instruction can result in material damage to the device and / or its environment. Symbol Bedeutung ATEX-Notified Body for Quality Assessment. 1338E00 According to marking, device approved for hazardous areas. 0198E00 Input 159E00 Output 158E00 3 Safety notes 3.1 Operating instructions storage Read the operating instructions carefully and store them at the mounting location of the device. Observe applicable documents and operating instructions of the devices to be connected. Fuse base with fusible link 195 / Series BA00 III en 0

5 Function and device design 3. Safe use Read and observe the safety notes in these operating instructions! Use the device in accordance with its intended and approved purpose only. We cannot be held liable for damage caused by incorrect or unauthorized use or by non-compliance with these operating instructions. Before installation and commissioning, make sure that the device is not damaged. Work on the device (installation, maintenance, overhaul, repair) may only be carried out by appropriately authorized and trained personnel. During installation and operation observe the information (characteristic values and rated operating conditions) on the rating, data and information plates located on the device. Always consult with R. STAHL Schaltgeräte GmbH in case of operating conditions which deviate from the technical data. 3.3 Modifications and alterations Explosion hazard due to modifications and alterations to the device! Non-compliance results in severe or fatal injuries. Do not modify or alter the device. No liability or warranty for damage resulting from modifications and alterations. Function and device design Explosion hazard due to improper use! Non-compliance results in severe or fatal injuries. Use the device only according to the operating conditions described in these operating instructions..1 Function The fuse elements Series 851 safe electric circuits in hazardous areas. They must be installed in an enclosure of type of the protection Ex-e "Increased safety". The fuse element 851/01 is equipped with customary fuse links of the Neozed system and the fuse element 851/0 with customary fuse links of the Diazed system. They are mainly used in Ex-e power distribution boards for protection of consumer terminals. 195 / BA00 III en 0 Fuse base with fusible link Series 851 5

6 Technical data 5 Technical data Marking Type designation 851 Explosion Protection Global (IECEx) Gas IECEx PTB 0.003U Ex d e IIC Gb Ex d e I Mb Europe (ATEX) Gas PTB 0 ATEX 108 U E II G Ex de IIC Gb E I M Ex de I Mb Certifications and certificates Certificates IECEx, ATEX, Brazil (INMETRO), Serbia (SRPS) Technical Data Design 851/01 851/0 Electrical data Rated insulation 550 V 90 V voltage Rated operational voltage 00 V AC, 50 V DC 500 V AC/DC Rated operational current I e D01 1 A, D0 5A Operating class gg gg DII 5 A, DIII 3 A Fuse base with fusible link 195 / Series BA00 III en 0

7 t t Technical Data Current characteristics Ambient conditions Ambient temperature Temperature classes Mechanical data Enclosure material Time/current characteristic of the fuse links (tolerance range max. ± 10%) [s] vs A A A 10 A 13 A 1 A I p [A] -55 C C Epoxy resin 07105E00 851/01 851/0 [s] vs A A A 10 A 1 A 0 A 5 A 3 A 35 A 50 A 3 A Type Temperature Rated current class 851/01 T max. A T5 max. 10 A T max. 5 A 851/0 T max. 0 A T5 max. 35 A T max. 3 A Technical data I eff [A] 0595E / BA00 III en 0 Fuse base with fusible link Series 851 7

8 Transport and storage Selection Table Size thread Rated current Order number fuse element For further technical data, see Fuse link 05359E00 Adapter D01 A 851/ A A A A D0 0 A 851/ A D II E 7 A 851/ A A A A A A D III E A 851/ A A E E E00 Transport and storage Transport and store the device only in the original packaging. Store the device in a dry place (no condensation) and vibration-free. Do not drop the device. 7 Mounting and installation A prerequisite for safe functioning of the fuse element is its permanent mounting. 8 Fuse base with fusible link 195 / Series BA00 III en 0

9 Mounting and installation 7.1 Dimensions / fastening dimensions Dimensional Drawings (All Dimensions in mm / [inches]) - Subject to Alterations 0571E00 851/01 fuse element 851/0 fuse element 7. Mounting / dismounting, operating position The fuse element must only be installed, if it is fitted in an enclosure, that meets the requirements of an approved type of protection, according to IEC / , e.g. "Increased safety e". During installation of the component in an enclosure, that meets the requirements of the type of protection "Increased safety e", the clearance and creepage distances, according to IEC/ , must be adhered to. NOTICE Overheating A too short distance between individual components can cause overheating. Due to thermal reasons, a minimum distance of 9 mm has to be observed when several components are connected together. Fasten the device to the mounting holes, provided for this purpose, using suitable screws and accessories (see dimensional drawings). 057E00 When mounting the component, ensure presence of a flat surface. The operating position is optional. 195 / BA00 III en 0 Fuse base with fusible link Series 851 9

10 Maintenance and repair 7.3 Electrical Connection During installation, observe the following: The conductor must be connected carefully. The conductor insulation must reach to the clamping units. Do not damage the conductor (nicking) when stripping it. Ensure that the maximum permissible conductor temperatures and the maximum permissible surface temperature are not exceeded by selecting suitable electric lines and means of running them. 7. Commissioning Explosion hazard due to incorrect installation! Non-compliance results in severe or fatal injuries. Check the device for proper installation and function before commissioning. Comply with the national regulations. Before commissioning, make sure that: the components are not damaged, the device has been installed according to regulations, no foreign bodies are inside the device, all detachable connections have been tightened firmly, the prescribed tightening torques have been observed, the connection has been performed correctly. Mount / replace fuse link: - loosen safety screw. - unscrew fuse carrier. - if necessary, insert adapter. - if necessary, remove defective fuse link. - insert new fuse link into the fuse carrier. - screw the fuse carrier and the fuse link into the fuse base hand tight. - fasten the safety screw. 8 Maintenance and repair WARNING Risk of electric shock or malfunctioning of the device due to unauthorized work! Non-compliance can result in severe injuries and material damage. Work performed on the device must only be carried out by appropriately authorized and qualified electricians. 10 Fuse base with fusible link 195 / Series BA00 III en 0

11 8.1 Maintenance Maintenance and repair Danger due to energised parts! Risk of death or severe injuries! Before starting any maintenance work, disconnect the device from the power supply. Secure the device against unauthorized switching. WARNING Replacement of the fuse links must only be performed when the system is disconnected. Consult the relevant national regulations to determine the type and extent of inspections. Adapt inspection intervals to the operating conditions. During maintenance of the device, check at least: if the clamping screws holding the cables are securely seated, if the device enclosure and / or protective enclosure have cracks or other visible signs of damage, compliance with the permissible temperatures (according to 0079), if the nut is held securely in place A defect of the fuse link can be detected from the outside by means of the indicating pin. 8. Cleaning Clean the device only with a cloth, brush, vacuum cleaner or similar items. When cleaning with a damp cloth, use water or mild, non-abrasive, non-scratching cleaning agents. Do not use aggressive detergents or solvents. 8.3 Maintenance Observe the relevant national regulations in the country of use. 8. Repair If the components are damaged, they must be replaced. 195 / BA00 III en 0 Fuse base with fusible link Series

12 Disposal 8.5 Returning the device Use the "Service form" to return the device when repair/service is required. On the internet site " under "Downloads > Customer service": Download the service form and fill it out. Send the device along with the service form in the original packaging to R. STAHL Schaltgeräte GmbH. 9 Disposal Observe national and local regulations and statutory regulation regarding disposal. Separate materials when sending it for recycling. Ensure environmentally friendly disposal of all components according to the statutory regulations. 10 Accessories and Spare parts NOTE Malfunction or damage to the device due to the use of non-original components. Non-compliance can result in material damage. Use only original accessories and spare parts from R. STAHL Schaltgeräte GmbH. For accessories and spare parts, see data sheet on our homepage Accessories and Spare Parts Designation Figure Description Art. no. Weight kg Adapter key 851/01 for replacement of adaptor Neozed Adapter key 851/0 0507E00 for replacement of adapter Diazed Terminal cover 0510E00 IP10 cover E00 1 Fuse base with fusible link 195 / Series BA00 III en 0