DOUBLE/SINGLE HUNG WINDOWS

Size: px
Start display at page:

Download "DOUBLE/SINGLE HUNG WINDOWS"

Transcription

1 DOUBLE/SINGLE HUNG WINDOWS D3 D4 D5 Product Features Specifications Parts Identification D5 Double Hung Window D6 D27 Product Elevations D8 D24 Double/Single Hung Window D6 16" (407 ) & 20" (509 ) Combinations D8 24" (610 ) & 26" (661 ) Combinations D10 28" (712 ) & 30" (763 ) Combinations D12 32" (814 ) & 36" (915 ) Combinations D14 40" (1017 ) Combinations D16 Double/Single Hung Cottage Style Singles D17 Double/Single Hung Cottage Style Doubles D18 Double/Single Hung Cottage Style Triples D19 Double/Single Hung Fixed Sash Windows D21 Double/Single Hung Transoms D23 16" (407 ) Flanker Combinations D24 D29 Product Details D24 Double Hung Window/Wall Connection D25 Double Hung Window D26 Double Hung Fixed Window D27 Double Hung Fixed Window with Mission Sash D28 Single Hung Window D29 Double Hung Transom Window D Double/Single Hung Windows D30 D31 Performance Ratings D32 D35 Light and Vent Schedule D36 D41 Guide Specifications Single Hung windows are available in StormForce. See Section K for more detailed information.

2 D Double/Single Hung Windows Painted non clad Cottage style Double Hung with Simulated Divided Lites DOUBLE/SINGLE HUNG WINDOWS Canada and U.S.A / International DOUBLE HUNG WINDOW: Double Hung windows open from both the top and the bottom. A special tilt latching system also provides inward tilting of the sash for easy cleaning or complete removal. SINGLE HUNG WINDOW: Single Hung windows feature a movable sash that slides vertically within the plane of the window frame. In a Single Hung window, only the bottom sash operates.

3 PRODUCT FEATURES STYLES: Double Hung, Single Hung, Radius Top and Cottage options. GLAZING: Heat-Smart 1 and optional Sun 240. StormForce DP, IP, MP (Single Hung only). STANDARD FEATURES Natural, clear Douglas Fir interior (no visible finger joints) Frame construction designed for 4 9/16" (116 ) jamb Low E 2 insulated glazing with 1/2" (12 ) airspace Extruded aluminum cladding in nine standard colors, primed wood or clear fir exterior Insect screens available in bronze, sandstone and linen Non clad windows are supplied with linen, bronze or sandstone screens at no additional charge. Screens may be optionally ordered in any of the 36 metal clad exterior colors. SIMULATED DIVIDED LITES (SDL) AND GRILLES: SDL 3/4" (19 ), 1 1/8" (29 ), 2" (50 ), Removable Grilles. BRICKMOULD: 2" (50 ), 3 1/2" (89 ) and 5 1/2" (140 ) wood. 2" (50 ) and 3 1/2" (89 ) metal. METAL CLAD COLOR SPECTRUM: Nine Standard Palette and 27 optional Architectural Palette colors. For a more in-depth, comprehensive review of Product Features, please refer to the Miscellaneous section. HARDWARE: Hardware and hardware finishes are dependent on hardware choices. Visit the Loewen Photo Gallery online at for a large collection of Loewen product and elevation photography. Specifications and technical information are subject to change without notice. Metric and Imperial measurements are converted accurately, however in some cases industry conventions cause a 1 variance. (Example: 3/4" is shown as 20 for all glass measurements as this is the industry standard.) LEGEND: STANDARD OPTIONAL 1 Nine standard metal clad colors, 27 optional 2 Exterior 3 Some size restrictions apply C1 D3 Hardware Styles Sash Lock Sash/Lift/Pull Finish Options Linen Sandstone Bronze Black Oil Rubbed Bronze Antique Brass Bright Brass Brushed Chrome Double/Single Hung Double/Single Hung Variables Function: Use for Egress Available with Screen 2 Concealed Hardware Durability: Low Maintenance Metal Clad Exterior 1 Clear Douglas Fir Exterior Finish Clear Mahogany Exterior Finish Primed Exterior Finish Performance: Heat-Smart Plus 1 Heat-Smart Plus 2, 3 3 Tranquility StormForce Appearance: SDL All standard window configurations are represented in this Loewen Architectural Catalog. Numerous custom opportunities exist please contact your Authorized Loewen Dealer.

4 SPECIFICATIONS STANDARDS Units have been tested by an independent laboratory for air, structural and water infiltration, and thermal performance requirements. FRAME AND SASH Manufactured from Coastal Douglas Fir kiln-dried lumber with frame construction designed for 4 9/16" (116 ) jamb. All exterior components are factory primed; minor scratches or abrasions are not considered defects. ALTERNATE SPECIES The entire Loewen product line is also available in optional Mahogany (Swietenia macrophylla) or optional FSC chain of custody certified Douglas Fir (SW-COC-1739). PRESERVATIVE TREATED All wood parts are dipped in approved preservative. GLAZING A wood stop combined with glazing materials ensures a positive seal. INSULATING GLASS Available in 1/8" (3 ) double glass configuration only with 1/2" (12 ) airspace. HEAT-SMART Plus System 1 Heat-Smart best describes the benefits of the product that incorporates Low E 2 coating and argon gas. Heat-Smart systems help reduce heating and cooling costs, providing superior energy efficiency. METAL CLADDING Heavy duty extruded aluminum exterior metal cladding is available in nine Standard Palette and 27 optional Architectural Palette colors. Interior of window remains a natural wood finish as a standard. Metal clad units are supplied ready-to-install complete with nailing flange. HARDWARE Hardware is standard in bronze, linen, sandstone or black. Optional sash lift handles available at an additional charge. Operable sash come complete with tilt latch feature to allow for inward tilting of sash for easy cleaning. WEATHERSTRIP Flexible Santoprene bubble weatherstrip ensures a positive weather seal. SCREEN Standard screens have a bronze, linen or sandstone aluminum frame, screened with anti-glare fiberglass cloth. Screen frame color is matched to exterior finish on metal clad units. EGRESS s noted in elevation drawings meet national egress codes for fire escape. Canada and U.S.A. are marked separately. Consult local building codes for confirmation of size requirements for your area. All calculations are done with double insulated sash and standard hardware. D4 C2 Canada and U.S.A / International SIMULATED DIVIDED LITES (SDL) AND GRILLES Standard SDL comes without airspace grilles. Optional airspace grilles available. Grille bars are permanently applied to the interior and exterior. Loewen natural clear wood grilles install from the inside of the house and are removable for cleaning. Note: Optional Grilles Natural wood grilles will be supplied unless otherwise specified.

5 PARTS IDENTIFICATION DOUBLE HUNG WINDOW NO. DESCRIPTION 1 METAL FRAME CLADDING 2 HEAD JAMB 3 SASH BALANCE 4 5 INSIDE PARTING STOPS 20 6 JAMBLINER 7 TOP SASH 8 GLAZING STOP 9 SEALED UNIT 10 KEEPER 11 CAMLOCK 12 SASH LIFT (OPTIONAL) 13 STOP 14 CLADDING WEATHERSTRIP 17 CAM PIVOT (LEFT OR RIGHT) 18 BOTTOM SASH 19 HEAD MOULDING 20 SASH STOP 21 JAMBLINER COVER 22 TILT LATCH OPTIONAL SASH LIFT C3 D5 Note: This drawing is not to scale. For parts identification only. DSHU.3D

6 DOUBLE/SINGLE HUNG WINDOW ELEVATIONS 16" (407 MM) GLASS SIZE COMBINATIONS 20" (509 MM) GLASS SIZE COMBINATIONS Rough Opening 22 1/ / / / / / Unit O.S.M. 21 3/ / / / / / / / / / / / / / / / DH DH DH DH DH DH DH DH DH DH DH DH / / / / / / / DH DH DH DH DH DH Canadian Egress DH DH DH DH DH DH / / / DH DH DH DH DH DH DH DH DH DH DH DH / / / / D6 C4 DH DH DH DH DH DH Canada and U.S.A / International / DH DH DH DH DH DH Note: Substitute SH1 for DH1 when ordering a Single Hung unit. SDL/Grille patterns are dependent on SDL/Grille type. All patterns shown in this catalog are for illustration purposes only please verify SDL/Grille patterns before confirming your order. All information is subject to HP1 glazing / Visible 30 11/ DSHU.E

7 DOUBLE/SINGLE HUNG WINDOW ELEVATIONS 16" (407 MM) GLASS SIZE COMBINATIONS 20" (509 MM) GLASS SIZE COMBINATIONS Rough Opening 22 1/ / / / / / Unit O.S.M. 21 3/ / / / / / / / / / / / / / / / / DH DH DH DH DH DH DH DH DH DH DH DH Canadian Egress U.S.A. Egress / / DH DH DH DH DH DH / / / / DH DH DH DH DH DH D7 DH DH DH DH DH DH Visible Note: Substitute SH1 for DH1 when ordering a Single Hung unit. SDL/Grille patterns are dependent on SDL/Grille type. All patterns shown in this catalog are for illustration purposes only please verify SDL/Grille patterns before confirming your order. All information is subject to HP1 glazing. DSHU.E

8 DOUBLE/SINGLE HUNG WINDOW ELEVATIONS 24" (610 MM) GLASS SIZE COMBINATIONS 26" (661 MM) GLASS SIZE COMBINATIONS Rough Opening 30 1/ / / / / / Unit O.S.M. 29 3/ / / / / / / / / / / / / DH DH DH DH DH DH DH DH DH DH DH DH / / / / DH DH DH DH DH DH / / DH DH DH DH DH DH / / / / DH DH DH DH DH DH Canadian Egress / DH DH DH DH DH DH / / / D / DH DH DH DH DH DH / / Canada and U.S.A / International / DH DH DH DH DH DH Note: Substitute SH1 for DH1 when ordering a Single Hung unit. SDL/Grille patterns are dependent on SDL/Grille type. All patterns shown in this catalog are for illustration purposes only please verify SDL/Grille patterns before confirming your order. All information is subject to HP1 glazing / Visible 30 11/ DSHU.E

9 DOUBLE/SINGLE HUNG WINDOW ELEVATIONS 24" (610 MM) GLASS SIZE COMBINATIONS 26" (661 MM) GLASS SIZE COMBINATIONS Rough Opening 30 1/ / / / / / Unit O.S.M. 29 3/ / / / / / / / / / / / / / / / / DH DH DH DH DH DH DH DH DH DH DH DH Canadian Egress U.S.A. Egress / / DH DH DH DH DH DH / / / / DH DH DH DH DH DH D9 DH DH DH DH DH DH Visible Note: Substitute SH1 for DH1 when ordering a Single Hung unit. SDL/Grille patterns are dependent on SDL/Grille type. All patterns shown in this catalog are for illustration purposes only please verify SDL/Grille patterns before confirming your order. All information is subject to HP1 glazing. DSHU.E

10 DOUBLE/SINGLE HUNG WINDOW ELEVATIONS 28" (712 MM) GLASS SIZE COMBINATIONS 30" (763 MM) GLASS SIZE COMBINATIONS Rough Opening 34 1/ / / / / / Unit O.S.M. 33 3/ / / / / / / / / / DH DH DH DH DH DH / / / DH DH DH DH DH DH / / / DH DH DH DH DH DH Canadian Egress U.S.A. Egress 52 15/ / / / DH DH DH DH DH DH / / / DH DH DH DH DH DH DH DH DH DH DH DH / / / / / / / D10 DH DH DH DH DH DH Canada and U.S.A / International / DH DH DH DH DH DH Note: Substitute SH1 for DH1 when ordering a Single Hung unit. SDL/Grille patterns are dependent on SDL/Grille type. All patterns shown in this catalog are for illustration purposes only please verify SDL/Grille patterns before confirming your order. All information is subject to HP1 glazing / Visible 30 11/ DSHU.E

11 DOUBLE/SINGLE HUNG WINDOW ELEVATIONS 28" (712 MM) GLASS SIZE COMBINATIONS 30" (763 MM) GLASS SIZE COMBINATIONS Rough Opening 34 1/ / / / / / Unit O.S.M. 33 3/ / / / / / / / / / DH DH DH DH DH DH / / / /8 880 DH DH DH DH DH DH Canadian Egress U.S.A. Egress / / DH DH DH DH DH DH / / / / DH DH DH DH DH DH D / / / DH DH DH DH DH DH Visible Note: Substitute SH1 for DH1 when ordering a Single Hung unit. SDL/Grille patterns are dependent on SDL/Grille type. All patterns shown in this catalog are for illustration purposes only please verify SDL/Grille patterns before confirming your order. All information is subject to HP1 glazing. DSHU.E

12 DOUBLE/SINGLE HUNG WINDOW ELEVATIONS 32" (814 MM) GLASS SIZE COMBINATIONS 36" (915 MM) GLASS SIZE COMBINATIONS Rough Opening 38 1/ / / / / / Unit O.S.M. 37 3/ / / / / / / / / / DH DH DH DH DH DH / / / DH DH DH DH DH DH / / / DH DH DH DH DH DH Canadian Egress U.S.A. Egress 52 15/ / / / DH DH DH DH DH DH / / / DH DH DH DH DH DH DH DH DH DH DH DH / / / / D / DH DH DH DH DH DH / / Canada and U.S.A / International / DH DH DH DH DH DH Note: Substitute SH1 for DH1 when ordering a Single Hung unit. SDL/Grille patterns are dependent on SDL/Grille type. All patterns shown in this catalog are for illustration purposes only please verify SDL/Grille patterns before confirming your order. All information is subject to HP1 glazing / Visible 30 11/ DSHU.E

13 DOUBLE/SINGLE HUNG WINDOW ELEVATIONS 32" (814 MM) GLASS SIZE COMBINATIONS 36" (915 MM) GLASS SIZE COMBINATIONS Rough Opening 38 1/ / / / / / Unit O.S.M. 37 3/ / / / / / / / / / / / / DH DH DH DH DH DH / / / /8 880 DH DH DH DH DH DH Canadian Egress U.S.A. Egress / / DH DH DH DH DH DH DH DH DH DH DH DH / / / / D13 DH DH DH Visible Note: Substitute SH1 for DH1 when ordering a Single Hung unit. SDL/Grille patterns are dependent on SDL/Grille type. All patterns shown in this catalog are for illustration purposes only please verify SDL/Grille patterns before confirming your order. All information is subject to HP1 glazing. DSHU.E

14 DOUBLE/SINGLE HUNG WINDOW ELEVATIONS 40" (1017 MM) GLASS SIZE COMBINATIONS Rough Opening 46 1/ / / Unit O.S.M. 45 3/ / / / / / / /4 920 DH DH DH / / / / / DH DH DH Canadian Egress U.S.A. Egress DH DH DH / / / / DH DH DH / / / / DH DH DH D14 Canada and U.S.A / International / DH DH DH Note: Substitute SH1 for DH1 when ordering a Single Hung unit. SDL/Grille patterns are dependent on SDL/Grille type. All patterns shown in this catalog are for illustration purposes only please verify SDL/Grille patterns before confirming your order. All information is subject to HP1 glazing /16 Visible / DSHU.E

15 DOUBLE/SINGLE HUNG WINDOW ELEVATIONS 40" (1017 MM) GLASS SIZE COMBINATIONS Rough Opening 46 1/ / / Unit O.S.M. 45 3/ / / / / / DH DH DH / / / DH DH DH Canadian Egress U.S.A. Egress 72 15/ / / / DH DH DH / / / /8 880 DH DH DH D / / / DH DH DH Visible Note: Substitute SH1 for DH1 when ordering a Single Hung unit. SDL/Grille patterns are dependent on SDL/Grille type. All patterns shown in this catalog are for illustration purposes only please verify SDL/Grille patterns before confirming your order. All information is subject to HP1 glazing. DSHU.E

16 DOUBLE/SINGLE HUNG WINDOW ELEVATIONS DOUBLE/SINGLE HUNG COTTAGE STYLE SINGLES Rough Opening 22 1/ / / / /8 867 Unit O.S.M. 21 3/ / / / / / CDH1 1616/24 CDH1 2016/24 CDH1 2416/24 CDH1 2616/24 CDH1 2816/ / / / / / / / / / CDH1 1624/36 CDH1 2024/36 CDH1 2424/36 CDH1 2624/36 CDH1 2824/ Visible / Rough Opening Unit O.S.M / /8 899 CDH1 3016/ / /8 950 CDH1 3216/ / / CDH1 3616/ / / CDH1 4016/ / / / / D16 Canada and U.S.A / International / CDH1 3024/ CDH1 3224/ CDH1 3624/ Note: Substitute SH1 for DH1 when ordering a Single Hung unit. SDL/Grille patterns are dependent on SDL/Grille type. All patterns shown in this catalog are for illustration purposes only please verify SDL/Grille patterns before confirming your order. All information is subject to HP1 glazing. CDH1 4024/ / / Visible 36 11/ / DSHU.E

17 DOUBLE/SINGLE HUNG WINDOW ELEVATIONS DOUBLE/SINGLE HUNG COTTAGE STYLE DOUBLES Rough Opening 43 1/ / / / / Unit O.S.M. 42 3/ / / / / / CDH2 1616/24 CDH2 2016/24 CDH2 2416/24 CDH2 2616/24 CDH2 2816/ / / / / / / / / / CDH2 1624/36 CDH2 2024/36 CDH2 2424/36 CDH2 2624/36 CDH2 2824/ Visible Rough Opening Unit O.S.M / / / CDH2 3016/ / / CDH2 3216/ / / CDH2 3616/ /2 90 3/ CDH2 4016/ / / / / D / / / / / CDH2 3024/36 CDH2 3224/36 CDH2 3624/36 CDH2 4024/ Visible Note: Substitute SH1 for DH1 when ordering a Single Hung unit. All information is subject to HP1 glazing. DSHU.E

18 DOUBLE/SINGLE HUNG WINDOW ELEVATIONS DOUBLE/SINGLE HUNG COTTAGE STYLE TRIPLES Rough Opening 64 7/ / / / / Unit O.S.M. 64 1/ / / / / / CDH3 1616/24 CDH3 2016/24 CDH3 2416/24 CDH3 2616/24 CDH3 2816/ / / / / / CDH3 1624/36 CDH3 2024/36 CDH3 2424/36 CDH3 2624/36 CDH3 2824/ / / / / Visible Rough Opening Unit O.S.M / / / CDH3 3016/ / / CDH3 3216/ / / CDH3 3616/ / / CDH3 4016/ / / / / D18 Canada and U.S.A / International / CDH3 3024/ CDH3 3224/ Note: Substitute SH1 for DH1 when ordering a Single Hung unit. All information is subject to HP1 glazing. CDH3 3624/ CDH3 4024/ / / Visible 36 11/ / DSHU.E

19 DOUBLE/SINGLE HUNG WINDOW ELEVATIONS DOUBLE/SINGLE HUNG FIXED SASH WINDOWS Rough Opening 42 1/ / / / / Unit O.S.M. 41 3/ / / / / / / / / / / / / / / DF 3630 DF 4430 DF 4830 DF 5630 DF 6430 DF 3634 DF 4434 DF 4834 DF 5634 DF / / DF 3642 DF 4442 DF 4842 DF 5642 DF 6442 DF 3646 DF 4446 DF 4846 DF 5646 DF / / D19 DF 3650 DF 4450 DF 4850 DF 5650 DF 6450* Visible Note: SDL/Grille patterns are dependent on SDL/Grille type. All patterns shown in this catalog are for illustration purposes only please verify SDL/Grille patterns before confirming your order. All information is subject to HP1 glazing. DSHU.E

20 DOUBLE/SINGLE HUNG WINDOW ELEVATIONS DOUBLE/SINGLE HUNG FIXED SASH WINDOWS Rough Opening 42 1/ / / / / Unit O.S.M. 41 3/ / / / / / / / DF 3654 DF 4454 DF 4854 DF 5654 DF 6454* / / / DF 3658 DF 4458 DF 4858 DF 5658* DF 6458* / DF 3662 DF 4462 DF 4862 DF 5662* DF 6462* 60 13/16** 1545** 61 1/ /8** 1571** 62 1/ D / / /4** 1645** 65 3/16** 1671** Canada and U.S.A / International DF 3666 DF 4466 DF DF 5666* DF 6466* 55 9/16** 1412** 56 5/8** 1438** Note: * These units are only available with a Mission sash. * * Second measurement refers to a unit with a Mission sash. SDL/Grille patterns are dependent on SDL/Grille type. All patterns shown in this catalog are for illustration purposes only please verify SDL/Grille patterns before confirming your order. All information is subject to HP1 glazing /16** 1615** 64 5/8** 1641** Visible DSHU.E

21 DOUBLE/SINGLE HUNG WINDOW ELEVATIONS DOUBLE/SINGLE HUNG TRANSOMS Rough Opening 22 1/ / / / /8 867 Unit O.S.M. 21 3/ / / / / / / / / DT DT DT DT DT / / / / DT DT DT DT DT / / / /8 524 DT DT DT DT DT DT DT DT DT DT / / / / D / / / / DT DT DT DT DT Visible Note: SDL/Grille patterns are dependent on SDL/Grille type. All patterns shown in this catalog are for illustration purposes only please verify SDL/Grille patterns before confirming your order. All information is subject to HP1 glazing. DSHU.E

22 DOUBLE/SINGLE HUNG WINDOW ELEVATIONS DOUBLE/SINGLE HUNG TRANSOMS Rough Opening 36 1/ / / / Unit O.S.M. 35 3/ / / / / / / / DT DT DT DT / / / / DT DT DT DT / / / /8 524 DT DT DT DT DT DT DT DT / / / / D /8 619 Canada and U.S.A / International / / / DT DT DT DT Note: SDL/Grille patterns are dependent on SDL/Grille type. All patterns shown in this catalog are for illustration purposes only please verify SDL/Grille patterns before confirming your order. All information is subject to HP1 glazing Visible DSHU.E

23 DOUBLE/SINGLE HUNG WINDOW ELEVATIONS 16" (407 MM) GLASS SIZE FLANKER COMBINATIONS Rough Opening 92 7/ / / / Unit O.S.M. 92 1/ / / / / DHF DHF DHF DHF / / / / / / / / DHF DHF DHF DHF / / DHF DHF DHF DHF / / / / / DHF DHF DHF DHF DHF DHF DHF DHF / / / / / / / / / DHF DHF / / / / D / / / / DHF DHF Visible Note: 1st and 3rd numbers refer to the side units. 2nd numbers refer to the Fixed center unit. Substitute SH1 for DH1 when ordering a Single Hung unit. SDL/Grille patterns are dependent on SDL/Grille type. All patterns shown in this catalog are for illustration purposes only please verify SDL/Grille patterns before confirming your order. All information is subject to HP1 glazing. DSHU.E

24 DOUBLE HUNG WINDOW/WALL CONNECTION DETAILS HEAD & DETAILS 3"=1'-0" 1 1/4" (32) 4 9/16" (116) 1 3/16" (30) 4 9/16" (116) HEAD HEAD ROUGH OPENING OUTSIDE MEASUREMENT CHECKRAIL ROUGH OPENING OUTSIDE MEASUREMENT CHECKRAIL OPTIONAL LIFT OPTIONAL LIFT METAL CLAD DOUBLE 4 9/16" (116 ) PLAN VIEW METAL CLAD & WOOD ROUGH OPENING OUTSIDE MEASUREMENT WOOD DOUBLE 4 9/16" (116 ) 1 1/4" (32) 3"=1'-0" D24 4 9/16" (116) Canada and U.S.A / International METAL CLAD DOUBLE 4 9/16" (116 ) ROUGH OPENING OUTSIDE MEASUREMENT WOOD DOUBLE 4 9/16" (116 ) 1 3/16" (30) Note: Other jamb widths available. All dimensions to have +/ 1/16" (2 ) tolerance. 4 9/16" (116) DSHU.D

25 DOUBLE HUNG WINDOW DETAILS HEAD & DETAILS 3"=1'-0" OUTSIDE MEASUREMENT 2 9/16" (65) VISIBLE GLASS VISIBLE GLASS 1 1/4" 6 9/16" (32) (166) 1 1/8" (28) HEAD 1 7/16" (36) OPTIONAL LIFT OUTSIDE MEASUREMENT VISIBLE VISIBLE 2 1/2" GLASS GLASS (63) 1 1/4" 4 9/16" (31) (116) 1 5/16" (34) HEAD 1 3/8" (35) OUTSIDE MEASUREMENT VISIBLE VISIBLE 2 1/2" GLASS GLASS (63) 1 1/4" 6 9/16" (31) (166) 1 5/16" (34) HEAD 1 3/8" (35) 1 7/16" (36) 4 11/16" (119) 3 1/16" (77) 3 1/8" (79) 5 1/16" (128) 3 1/16" (77) 4 11/16" (121) 3 1/16" (77) METAL CLAD DOUBLE 6 9/16" (166 ) OPTIONAL WOOD FOR WOOD EXTERIOR 4 9/16" (116 ) WOOD DOUBLE 6 9/16" (166 ) PLAN VIEW 3 3/16" (81) 6 3/8" (162) 3 3/16" (81) 3"=1'-0" 2 9/16" (65) 1 1/4" (32) 1 1/8" (28) 4 9/16" (116) HEAD 1 7/16" (36) Not to Scale METAL CLAD 3 3/16" (81) 1 1/4" (32) 2 13/16" (72) 6 3/8" (162) 3 1/16" (77) 3 3/16" (81) OUTSIDE MEASUREMENT 1 11/16" VISIBLE GLASS VISIBLE GLASS CHECKRAIL OPTIONAL LIFT D /16" (119) 3 1/8" (79) WOOD 1 1/4" (32) 2 13/16" (72) METAL CLAD DOUBLE 4 9/16" (116 ) Note: Other jamb widths available. All dimensions to have +/ 1/16" (2 ) tolerance. DSHU.D

26 DOUBLE HUNG FIXED WINDOW DETAILS HEAD & DETAILS 3"=1'-0" 1 1/4" (32) 6 9/16" (166) 1 3/16" (30) 4 9/16" (116) 1 3/16" (30) 6 9/16" (166) 1 1/8" (28) 1 5/16" (34) 1 5/16" (34) 2" (51) 2 1/2" (63) HEAD 5/8" (16) 1 7/16" (36) 2 1/2" (63) HEAD 1 7/16" (36) HEAD 5/8" (16) 1 7/16" (36) 1 3/8" (35) 1 3/8" (35) 4 11/16" (119) 3 1/16" (77) 2 1/16" (53) 3 1/8" (79) 5" (126) 3 1/16" (77) 4 11/16" (119) 3 1/16" (77) 2 1/16" (53) 3 1/8" (79) METAL CLAD DOUBLE 6 9/16" (166 ) WOOD DOUBLE 4 9/16" (116 ) Optional with Wood Sill WOOD DOUBLE 6 9/16" (166 ) 2 1/2" (63) 1 1/4" (32) 1 1/8" (28) 4 9/16" (116) HEAD Not to Scale 1 7/16" (36) PLAN VIEW 3 3/16" (81) 6 3/8" (162) 3 3/16" (81) 3"=1'-0" D26 Canada and U.S.A / International OUTSIDE MEASUREMENT VISIBLE GLASS 4 11/16" (119) 3 1/16" (77) 1 7/16" (36) METAL CLAD DOUBLE 4 9/16" (116 ) Note: Other jamb widths available. All dimensions to have +/ 1/16" (2 ) tolerance. 2 1/16" (53) 3 1/8" (79) METAL CLAD 3 3/16" (81) WOOD 1 1/8" (28) 1 1/4" (32) 2 13/16" (72) 6 3/8" (162) 1 1/4" (32) 2 13/16" (72) 3 3/16" (81) DSHU.D

27 DOUBLE HUNG FIXED WINDOW WITH MISSION SASH DETAILS HEAD & DETAILS 3"=1'-0" 1 1/4" (32) 1 1/8" (28) 6 9/16" (166) 1 15/16" (50) 1 3/16" (30) 4 9/16" (116) 1 5/16" (34) 1 3/16" (30) 1 5/16" (34) 6 9/16" (166) 1 15/16" (50) HEAD 5/8" (16) 2 7/8" (74) 1 7/16" (36) 2 7/8" (74) HEAD 1 7/16" (36) 2 7/8" (74) HEAD 5/8" (16) 2 1/4" (57) 2 1/4" (57) 2 1/4" (57) 4 9/16" (116) 3 1/16" (77) 2 1/16" (53) 3 1/8" (79) 4 9/16" (116) 3 1/16" (77) 2 1/16" (53) 3 1/8" (79) 3 1/16" (77) 2 1/16" (53) 3 1/8" (79) METAL CLAD TRIPLE 6 9/16" (166 ) WOOD DOUBLE 4 9/16" (116 ) WOOD TRIPLE 6 9/16" (166 ) PLAN VIEW 2 7/8" (73) 6 1/16" (155) 3 3/16" (81) 3"=1'-0" 2 7/8" (74) 1 1/4" (32) 1 1/8" (28) 4 1/2" (115) HEAD Not to Scale METAL CLAD 2 7/8" (73) 1 1/4" (32) 2 13/16" (72) 6 1/16" (155) 3 3/16" (81) 2 1/4" (57) D27 4 9/16" (116) 2 1/16" (53) 1 1/8" (28) 1 7/16" (36) OUTSIDE MEASUREMENT 3 1/8" (79) 3 1/16" (77) VISIBLE GLASS WOOD 1 1/4" (32) 2 13/16" (72) METAL CLAD DOUBLE 4 9/16" (116 ) Note: Other jamb widths available. All dimensions to have +/ 1/16" (2 ) tolerance. DSHU.D

28 SINGLE HUNG WINDOW DETAILS HEAD & DETAILS 3"=1'-0" 1 1/4" 4 9/16" (32) (116) 1 1/8" (28) 1 1/4" 4 9/16" (31) (116) 1 5/16" (34) 1 1/4" 6 9/16" (31) (166) 1 5/16" (34) VISIBLE 2 1/2" GLASS (63) HEAD 1 7/16" (36) VISIBLE 2 1/2" GLASS (63) HEAD VISIBLE 2 1/2" GLASS (63) HEAD 1 7/16" (36) OUTSIDE MEASUREMENT VISIBLE GLASS OPTIONAL LIFT OUTSIDE MEASUREMENT 4 3/4" (121) VISIBLE GLASS 3 1/16" (77) OUTSIDE MEASUREMENT VISIBLE GLASS 1 3/8" (35) 5 1/16" (128) 3 1/16" (77) 4 3/4" (121) 3 1/16" (77) 3 1/8" (79) METAL CLAD DOUBLE 6 9/16" (166 ) OPTIONAL WOOD FOR WOOD EXTERIOR 4 9/16" (116 ) WOOD DOUBLE 6 9/16" (166 ) 2 1/2" (63) 1 1/4" (32) 1 1/8" (28) 4 9/16" (116) HEAD Not to Scale 1 7/16" (36) PLAN VIEW 3 3/16" (81) 6 3/8" (162) 3 3/16" (81) 3"=1'-0" D28 Canada and U.S.A / International OUTSIDE MEASUREMENT VISIBLE GLASS VISIBLE GLASS 4 3/4" (121) 3 1/16" (77) METAL CLAD DOUBLE 4 9/16" (116 ) Note: Other jamb widths available. OPTIONAL LIFT All dimensions to have +/ 1/16" (2 ) tolerance. 3 1/8" (79) METAL CLAD WOOD 3 3/16" (81) 1 1/4" (32) 2 13/16" (72) 6 3/8" (162) 1 1/4" (32) 2 13/16" (72) 3 3/16" (81) DSHU.D

29 DOUBLE HUNG TRANSOM WINDOW DETAILS HEAD & DETAILS 3"=1'-0" 1 1/4" (32) 6 9/16" (166) 1 3/16" (30) 4 9/16" (116) 1 3/16" (30) 6 9/16" (166) 2 1/2" (63) 2 1/2" (63) 1 5/16" (34) 1 3/8" (35) 2 1/2" (63) 2 1/2" (63) 1 5/16" (34) 1 3/8" (35) 2 1/2" (63) 2 1/2" (63) 1 3/8" (35) HEAD HEAD HEAD 1 7/16" (36) METAL CLAD DOUBLE 6 9/16" (166 ) WOOD DOUBLE 4 9/16" (116 ) WOOD DOUBLE 6 9/16" (166 ) PLAN VIEW 3 3/16" (81) 6 3/8" (162) 3 3/16" (81) 3"=1'-0" 2 1/2" (63) 1 1/4" (32) 1 3/8" (35) 4 9/16" (116) HEAD Not to Scale METAL CLAD 1 1/4" (32) 1 1/2" (38) OUTSIDE MEASUREMENT VISIBLE GLASS D29 3 3/16" (81) 6 3/8" (162) 3 3/16" (81) 2 1/2" (63) WOOD 1 1/4" (32) 1 1/2" (38) METAL CLAD DOUBLE 4 9/16" (116 ) Note: Other jamb widths available. All dimensions to have +/ 1/16" (2 ) tolerance. DSHU.D

30 DOUBLE/SINGLE HUNG WINDOW PERFORMANCE RATINGS CSA A CANADA Product Type Unit Air Leakage Water Leakage Structural Forced Entry Double Hung 45 3/8" x 60 1/8" A2 B3 C3 (Metal Clad) (1153 x 1530 ) 0.76 m Pa 75 Pa (6.26 psf) (62.5 psf) Double Hung Fixed 69 3/8" x 64 1/4" Fixed B3 C5 (Metal Clad) (1762 x 1632 ) m Pa 75 Pa (6.27 psf) (105.0 psf) Single Hung 45 3/8" x 80 1/4" A3 B4 C4 (Non Clad) (1153 x 2038 ) m Pa 75 Pa (8.35 psf) (83.54 psf) Single Hung 45 3/8" x 80 1/4" A2 B5 C5 (Metal Clad) (1153 x 2038 ) m Pa 75 Pa (10.4 psf) ( psf) AAMA/WDMA 101/I.S.2-97 U.S.A. Product Type Unit Air Leakage Water Leakage Structural Forced Entry D30 Double Hung 45 3/8" x 60 1/8" Pass H-R40 H-R50 (Metal Clad) (1153 x 1530 ) 0.14 ft 3 /m/ft psf F 75 Pa (290 Pa) (3600 Pa) Double Hung Fixed 69 3/8" x 64 1/4" Pass F-LC40 F-LC70 (Metal Clad) (1762 x 1632 ) l/sec/m Pa (290 Pa) (5040 Pa) Single Hung 45 3/8" x 80 1/4" Pass H-LC60 LC65 (Non Clad) (1153 x 2038 ) 0.05 ft 3 /m/ft Pa (440 Pa) (4680 Pa) Single Hung 45 3/8" x 80 1/4" Pass H-LC75 LC70 (Metal Clad) (1153 x 2038 ) 0.09 ft 3 /m/ft Pa (540 Pa) (5040 Pa) NFRC U-FACTOR AND SHGC/VT NON CLAD Product Type Glazing Type Spacer Gap Fill 1 Gap Fill 2 U-Factor Res SHGC (max) VT (max) Double Hung Double Clear Standard Air Double Clear Standard Argon HP1 Standard Air HP1 Standard Argon HP1 Thermal Edge Argon Double Hung Fixed Double Clear Standard Air /4" x 59 1/16" Double Clear Standard Argon (1200 x 1500 ) HP1 Standard Air HP1 Standard Argon HP1 Thermal Edge Air HP1 Thermal Edge Argon Double Sun 240 Standard Air Double Sun 240 Standard Argon Canada and U.S.A / International NFRC U-FACTOR AND SHGC/VT ALUMINUM CLAD Product Type Glazing Type Spacer Gap Fill 1 Gap Fill 2 U-Factor Res SHGC (max) VT (max) Double Hung Double Clear Standard Air Double Clear Standard Argon HP1 Standard Air HP1 Standard Argon HP1 Thermal Edge Argon Double Hung Fixed Double Clear Standard Air /4" x 59 1/16" Double Clear Standard Argon (1200 x 1500 ) HP1 Standard Air HP1 Standard Argon HP1 Thermal Edge Air HP1 Thermal Edge Argon Double Sun 240 Standard Air Double Sun 240 Standard Argon

31 DOUBLE/SINGLE HUNG WINDOW PERFORMANCE RATINGS ENERGY STAR CANADA REQUIREMENTS Product Type Zone A Zone B Zone C Zone D (0.35) (0.32) (0.28) (0.25) Double Hung HP1 Argon 0.35 ENERGY STAR U.S.A. REQUIREMENTS Product Type Northern Zone North/Central Zone South/Central Zone Southern Zone (0.35) (0.40/.55) (0.40/.40) (0.65/.40) Double Hung HP1 Argon 0.35 HP1 Argon 0.35 HP1 Argon 0.35 HP1 Argon 0.35 MIAMI-DADE COUNTY Product Type Air Water Static Forced Large Missile Cyclic NOA Infiltration Infiltration Load Entry (D) Impact Load Number 1.57 psf 10.5 psf +70/-70 psf 300lb +70/-70 psf design pressure design pressure Metal Clad Impact PASS PASS PASS PASS PASS PASS Single Hung Metal Clad Impact PASS PASS PASS N/A PASS PASS Single Hung Fixed Metal Clad Impact PASS PASS PASS N/A PASS PASS / Single Hung Transom BFRC U-FACTOR Product Type Glazing Total Window U (W/m 2 K) Non Clad Double Hung for L1 47 7/16" x 58 1/4" HP1 [ Low E (S2) Argon] 1.7 (1230 x 1480 ) Metal Clad Double Hung for L1 47 7/16" x 58 1/4" HP1 [ Low E (S2) Argon] 1.8 (1230 x 1480 ) Non Clad Double Hung/Fixed Picture for L2 47 7/16" x 58 1/4" HP1 [ Low E (S2) Argon] 1.6 (1230 x 1480 ) Metal Clad Double Hung/Fixed Picture for L2 47 7/16" x 58 1/4" HP1 [ Low E (S2) Argon] 1.7 (1230 x 1480 ) HP1 [ Low E (S2) Argon] 1.5 JIS Product Type Air Leakage Water Leakage Structural Double Hung A-4 W-3 S m 3 /h/m Upper limit = 380 Upper limit = Lower limit = 120 Lower limit = Pa D31

32 DOUBLE & SINGLE HUNG WINDOW LIGHT AND VENT SCHEDULE IMPERIAL D32 Canada and U.S.A / International Code Unit OSM Exposed Area Egress Opening W H ft 2 W H Area

33 DOUBLE & SINGLE HUNG WINDOW LIGHT AND VENT SCHEDULE IMPERIAL Code Unit OSM Exposed Area Egress Opening W H ft 2 W H Area D33

34 DOUBLE & SINGLE HUNG WINDOW LIGHT AND VENT SCHEDULE METRIC D34 Canada and U.S.A / International Code Unit OSM Exposed Area Egress Opening W H m 2 W H Area

35 DOUBLE & SINGLE HUNG WINDOW LIGHT AND VENT SCHEDULE METRIC Code Unit OSM Exposed Area Egress Opening W H m 2 W H Area D35

36 GUIDE SPECIFICATIONS GUIDE SPECIFICATIONS FOR WINDOWS BY LOEWEN SECTION WOOD [NON CLAD]: HUNG WINDOW UNITS PART 1 GENERAL 1.01 SUMMARY A. Work Included: Furnish and install factory-assembled wood Hung window units, including glass and glazing, hardware, and accessories; as indicated on Drawings and as specified here B. Related Sections: Other Specification sections that directly relate to the work of this Section include, but are not limited to, the following: 1. Section 06100, Rough Carpentry: Wood framing. 2. Section 07210, Building Insulation: Batt and blanket insulation. 3. Section 07900, Joint Sealers: Perimeter sealants. 4. Section 09900, Painting: Painting and finishing PERFORMANCE REQUIREMENTS A. General: Perform testing in accordance with AAMA/WDMA 101 I.S.2 and/or NAFS 1 and/or CSA A440. D36 B. Forced Entry: When tested in accordance with ASTM F588, shall be Grade 20/F-2 where applicable SUBMITTALS A. Product Data: Submit manufacturer s printed product data, test reports and installation instructions. B. Shop Drawings: Submit shop drawings for approval. Include detailed plans, elevations, details, required rough openings, anchors and accessories. Include relationship with adjacent materials. Provide installation templates for work installed by others. C. Samples: Submit representative samples of each material that is to be exposed in the completed work. Show full color ranges and finish variations expected QUALITY ASSURANCE: A. Manufacturer: For each material type required for the work of this section, provide primary materials that are the product of one manufacturer. Provide secondary or accessory materials that are acceptable to the manufacturer of the primary materials. B. Installer: A firm with a minimum of three years experience in the type of work required by this Section. Canada and U.S.A / International C. Mock-Up: Prior to coencing the primary work of this section, provide a mock-up of each unit type at locations acceptable to Architect. Obtain Architect s acceptance of visual qualities. Remove and replace units that are not approved. Approved mock-ups built in place may be incorporated into the finished work DELIVERY, STORAGE AND HANDLING A. Deliver materials and products in factory labeled packages. Store and handle in strict compliance with manufacturer s instructions and recoendations. Protect from damage from weather, excessive temperatures and construction operations. WOOD [NON CLAD]: HUNG WINDOW UNITS

37 GUIDE SPECIFICATIONS GUIDE SPECIFICATIONS FOR WINDOWS BY LOEWEN 1.06 WARRANTY A. Provide manufacturer s standard limited warranty covering the following: 1. Structural members and operating hardware are warranted against defects in material and workmanship for a period of 10 years. 2. Insulating glass is warranted against material obstruction of transparency resulting from film formation or dust collection on the interior surfaces for a period of 10 years and 20 years on qualifying Heat-Smart Systems. PART 2 PRODUCTS 2.01 ACCEPTABLE MANUFACTURER A. Provide units manufactured by Loewen (Loewen Inc. in the U.S.A. and C.P. Loewen Enterprises Ltd. in Canada and internationally; 77 Highway 52 West, Steinbach, Manitoba R5G 1B2; ; ; WOOD [NON-CLAD]: HUNG WINDOW UNITS A. Wood Hung window units: Preglazed with insulating glass tested to AAMA/WDMA 101 I.S.2 and/or NAFS 1 and/or CSA A440 and/or CSA/AAMA/WDMA 101 I.S.2 A440. Tested for Air Leakage, Water Leakage, Wind Resistance/Load. 1. and Glazing Type: a. Double-glazed [and Heat-Smart Plus System 1]. b. Special Designs:. 2. Hardware: Heavy duty cam-lock and tilt latches. a. [Sash lift]. b. Finish: painted [Bronze][Linen][Sandstone][Black], plated [Antique Brass][Bright Brass][Oil Rubbed Bronze] and [Brushed Chrome]. 3. Grilles: a. Style: [Colonial][Heritage][Craftsman][ ]. b. Simulated Divided Lites: [3/4"][1 1/8"][2"] Grille bars permanently applied to the interior and exterior, with or without airspace grilles. 4. Insect Screen: Full-size; [Bronze][Linen][Sandstone][Black] frame color. 5. Weatherstrip: Flexible bubble and foam filled leaf. D MATERIALS AND COMPONENTS A. Frame and Sash: Coastal Douglas Fir [Mahogany (Swietenia macrophylla)] kiln-dried lumber, preservativetreated in accordance with NAFS 1/WDMA 101 I.S.-2/CSA-A440. Interior exposed surfaces are clear Fir [Mahogany]; exterior surfaces factory primed [clear]. Jamb width [4 9/16" (116 )] [6 9/16" (166 )][other]. B. and Glazing: Factory sealed units of 3 clear glass with 1/2" (12 ) airspace; wood stop at interior face and foam tape gasket at exterior face. C. Grilles: Manufacturer s standard, unfinished clear wood grilles, interior mounted. WOOD [NON CLAD]: HUNG WINDOW UNITS

38 GUIDE SPECIFICATIONS GUIDE SPECIFICATIONS FOR WINDOWS BY LOEWEN D. Insect Screen: Black anti-glare fiberglass cloth, set in aluminum frame fitted to outside of window, supplied complete with necessary hardware. Screen frame finish shall be baked enamel. E. Finishes: 1. Exterior Wood Finish: Factory primed. Refer to Section 09900, Painting. 2. Interior Wood Finish: Unfinished, ready for site finishing. Refer to Section 09900, Painting. PART 3 EXECUTION 3.01 PREPARATION A. Examine substrates and conditions in which units will be installed. Do not proceed with installation until unsatisfactory conditions are corrected INSTALLATION A. Strictly comply with manufacturer s instructions and recoendations, except where more restrictive requirements are specified in this section. Coordinate installation with adjacent work to ensure proper sequence of construction, clearances and support. B. Apply caulking underneath sill, install units plumb, level, complete with drip flashing and in proper relationship with adjacent work. Install without twisting, bowing or springing. Anchor units securely in place ADJUSTING AND CLEANING A. Adjust hardware and operating parts for proper operation. B. Clean exposed surfaces using manufacturer recoended materials and methods. Remove labels and visible markings. Remove and replace work that cannot be successfully cleaned. C. Touch-up damaged coatings and finishes using non-abrasive materials and methods recoended by manufacturer. Eliminate all visible evidence of repair. WOOD [NON CLAD]: HUNG WINDOW UNITS D38 Canada and U.S.A / International END OF SECTION Specifications subject to change without notice C.P. LOEWEN ENTERPRISES INC. All Rights Reserved. A copyright license to reproduce this specification is hereby granted to non-manufacturing architects, specification writers and designers. Subject to Change Without Notice Effective May 2006 Printed in Canada

39 GUIDE SPECIFICATIONS GUIDE SPECIFICATIONS FOR WINDOWS BY LOEWEN SECTION ALUMINUM CLAD: HUNG WINDOW UNITS PART 1 GENERAL 1.01 SUMMARY A. Work Included: Furnish and install factory-assembled aluminum-clad Hung window units, including glass and glazing, hardware, and accessories; as indicated on Drawings and as specified here B. Related Sections: Other Specification sections that directly relate to the work of this Section include, but are not limited to, the following: 1. Section 06100, Rough Carpentry: Wood framing. 2. Section 07210, Building Insulation: Batt and blanket insulation. 3. Section 07900, Joint Sealers: Perimeter sealants. 4. Section 09900, Painting: Painting and finishing PERFORMANCE REQUIREMENTS A. General: Perform testing in accordance with AAMA/WDMA 101 I.S.2 and/or NAFS 1 and/or CSA A440. B. Forced Entry: When tested in accordance with ASTM F588, shall be Grade 20/F-2 where applicable SUBMITTALS A. Product Data: Submit manufacturer s printed product data, test reports and installation instructions. B. Shop Drawings: Submit shop drawings for approval. Include detailed plans, elevations, details, required rough openings, anchors and accessories. Include relationship with adjacent materials. Provide installation templates for work installed by others. C. Samples: Submit representative samples of each material that is to be exposed in the completed work. Show full color ranges and finish variations expected QUALITY ASSURANCE: A. Manufacturer: For each material type required for the work of this section, provide primary materials that are the product of one manufacturer. Provide secondary or accessory materials that are acceptable to the manufacturer of the primary materials. D39 B. Installer: A firm with a minimum of three years experience in the type of work required by this Section. C. Mock-Up: Prior to coencing the primary work of this section, provide a mock-up of each unit type at locations acceptable to Architect. Obtain Architect s acceptance of visual qualities. Remove and replace units that are not approved. Approved mock-ups built in place may be incorporated into the finished work DELIVERY, STORAGE AND HANDLING A. Deliver materials and products in factory labeled packages. Store and handle in strict compliance with manufacturer s instructions and recoendations. Protect from damage from weather, excessive temperatures and construction operations. ALUMINUM CLAD: HUNG WINDOW UNITS

40 GUIDE SPECIFICATIONS GUIDE SPECIFICATIONS FOR WINDOWS BY LOEWEN 1.06 WARRANTY A. Provide manufacturer s standard limited warranty covering the following: 1. Structural members and operating hardware are warranted against defects in material and workmanship for a period of 10 years. 2. Insulating glass is warranted against material obstruction of transparency resulting from film formation or dust collection on the interior surfaces for a period of 10 years and 20 years on qualifying Heat-Smart Systems. PART 2 PRODUCTS 2.01 ACCEPTABLE MANUFACTURER A. Provide units manufactured by Loewen (Loewen Inc. in the USA and C.P. Loewen Enterprises Ltd. in Canada and internationally; 77 Highway 52 West, Box 2260, Steinbach, Manitoba R5G 1B2; ; ; ALUMINUM CLAD: HUNG WINDOW UNITS A. Aluminum clad Hung window units: Preglazed with insulating glass; [Single Hung][Double Hung] window tested to AAMA/WDMA 101 I.S.2 and/or NAFS 1 and/or CSA A440 and/or CSA/AAMA/WDMA 101 I.S.2 A440. Tested for Air Leakage, Water Leakage, Wind Resistance/Load. D40 Canada and U.S.A / International and Glazing Type: a. Double-glazed [and Heat-Smart Plus System 1]. b. Special Designs: 2. Hardware: Heavy duty cam-lock and tilt latches. a. [Sash lift] b. Finish: painted [Bronze][Linen][Sandstone][Black], plated [Antique Brass][Bright Brass][Oil Rubbed Bronze] and [Brushed Chrome] 3. Grilles: a. Style: [Colonial][Heritage][Craftsman][ ]. b. Between Grilles: [White Metal][Square Brass][Pewter]. c. Simulated Divided Lites: [3/4"][1 1/8"][2"] Grille bars permanently applied to the interior and exterior, with or without airspace grilles. 4. Insect Screen: Full-size to match exterior frame cladding color. 5. Weatherstrip: Flexible bubble and foam filled leaf MATERIALS AND COMPONENTS A. Frame and Sash: Coastal Douglas Fir [Mahogany (Swietenia macrophylla)] kiln-dried lumber, preservativetreated in accordance with NAFS 1/WDMA 101 I.S.-2/CSA-A440. Interior exposed surfaces are clear Fir [Mahogany]; exterior surfaces factory primed [clear]. Jamb width [4 9/16" (116 )][6 9/16" (166 )][other]. B. and Glazing: Factory sealed units of 3 clear glass with 1/2" (12 ) airspace; wood stop at interior face and foam tape gasket at exterior face. C. Hardware: Steel components with Truth E-Gard coating. D. Grilles: Manufacturer s standard, unfinished clear wood grilles, interior mounted. ALUMINUM CLAD: HUNG WINDOW UNITS

41 GUIDE SPECIFICATIONS GUIDE SPECIFICATIONS FOR WINDOWS BY LOEWEN E. Insect Screen: Black anti-glare fiberglass cloth, set in aluminum frame fitted to outside of window, supplied complete with necessary hardware. Screen frame finish shall be baked enamel. F. Finishes: 1. Exterior Aluminum Finish: Manufacturer s [Standard][Architectural] palette; colors as selected from manufacturers clad color spectrum. 2. Interior Wood Finish: Unfinished, ready for site finishing. Refer to Section 09900, Painting. PART 3 EXECUTION 3.01 PREPARATION A. Examine substrates and conditions in which units will be installed. Do not proceed with installation until unsatisfactory conditions are corrected INSTALLATION A. Strictly comply with manufacturer s instructions and recoendations, except where more restrictive requirements are specified in this section. Coordinate installation with adjacent work to ensure proper sequence of construction, clearances and support. B. Apply caulking underneath sill, install units plumb, level, complete with drip flashing and in proper relationship with adjacent work. Install without twisting, bowing or springing. Anchor units securely in place ADJUSTING AND CLEANING A. Adjust hardware and operating parts for proper operation. B. Clean exposed surfaces using manufacturer recoended materials and methods. Remove labels and visible markings. Remove and replace work that cannot be successfully cleaned. C. Touch-up damaged coatings and finishes using non-abrasive materials and methods recoended by manufacturer. Eliminate all visible evidence of repair. ALUMINUM CLAD: HUNG WINDOW UNITS D41 END OF SECTION Specifications subject to change without notice C.P. LOEWEN ENTERPRISES INC. All Rights Reserved. A copyright license to reproduce this specification is hereby granted to non-manufacturing architects, specification writers and designers. Subject to Change Without Notice Effective May 2006 Printed in Canada

42 Fixed transoms over Double Hung windows, all with matching Simulated Divided Lites. Canada and U.S.A / International D42

Garden Windows Builders Vinyl

Garden Windows Builders Vinyl TABLE OF CONTENTS Specifications... 8-2 QuickSpecGuide... 8-3 Elevations/Sizes: 1/4 Scale GardenUnits... 8-4 Grille Patterns... 8-5 SectionDetails: 6 Scale... 8-6 December 2008 JELD-WEN reserves the right

More information

Enhancing The Beauty And Value Of Your Home. Exclusive Patio Door Collection. NORTH STAR PATIO DOOR COLLECTION Two-Panel Three-Panel Four-Panel

Enhancing The Beauty And Value Of Your Home. Exclusive Patio Door Collection. NORTH STAR PATIO DOOR COLLECTION Two-Panel Three-Panel Four-Panel Enhancing The Beauty And Value Of Your Home. Exclusive Patio Door Collection. NORTH STAR PATIO DOOR COLLECTION Two-Panel Three-Panel Four-Panel Since 1985 North Star has been an industry leader in the

More information

SECTION REFERENCE. Tilt-Wash Double-Hung. Insert Windows. 400 Series

SECTION REFERENCE. Tilt-Wash Double-Hung. Insert Windows. 400 Series SECTION REFERENCE Size Ranges... 96 Existing Window Measurements... 96 Divided Light Patterns... 97 Window Details... 97 Joining Details... 97 Performance Data... 269 400 Series Windows TILT-WASH DOUBLE-HUNG

More information

City of San Diego, CWP Guidelines

City of San Diego, CWP Guidelines PART 1 -- GENERAL SECTION 08520-1.1 WORK OF THIS SECTION City of San Diego, CWP Guidelines A. The WORK of this Section includes providing aluminum windows with frames, bracing, glazing attachments, screens,

More information

Enhancing The Beauty And Value Of Your Home. Exclusive Patio Door Collection.

Enhancing The Beauty And Value Of Your Home. Exclusive Patio Door Collection. Enhancing The Beauty And Value f Your Home. Exclusive Patio Door Collection. Since 1985 North Star has been an industry leader in the manufacture of attractive and energy-efficient vinyl windows and patio

More information

DESIGN AND CONSTRUCTION GUIDELINES AND STANDARDS DIVISION 8 DOORS AND WINDOWS 08 50 00 WINDOWS

DESIGN AND CONSTRUCTION GUIDELINES AND STANDARDS DIVISION 8 DOORS AND WINDOWS 08 50 00 WINDOWS SECTION INCLUDES Metal Windows Vinyl/Aluminum Clad Wood Windows Solid Fiberglass and Vinyl Windows Wood Windows (Historic Preservation only) RELATED SECTIONS 02 83 00 Lead Paint Remediation 06 10 00 Rough

More information

Casement/Awning Window Parts Reference Catalog

Casement/Awning Window Parts Reference Catalog Casement/Awning Window Parts Reference Catalog (Includes Miscellaneous Parts for Eyebrow Casement and Garden Bay Windows) #1028654 (Revised 03/02) Weather Shield Mfg., Inc. Medford, WI 54451 715/748-2100

More information

RAM Industries 8600 Commerce Park Dr Houston, TX 77036 Tel: 281-495-9056 Fax: 281-495-6778 www.ramwindows.com

RAM Industries 8600 Commerce Park Dr Houston, TX 77036 Tel: 281-495-9056 Fax: 281-495-6778 www.ramwindows.com SERIES 900 CASEMENT WINDOW Page 1 of 6 RAM Industries 8600 Commerce Park Dr Houston, TX 77036 Tel: 281-495-9056 Fax: 281-495-6778 www.ramwindows.com SPECIFICATION GUIDE SERIES 900 CASEMENT WINDOW RAM Industries

More information

SECTION 08 41 1 ALUMINUM FRAMED ENTRANCES and STOREFRONTS. System 402 Flush-Glazed Screw Spline Storefront

SECTION 08 41 1 ALUMINUM FRAMED ENTRANCES and STOREFRONTS. System 402 Flush-Glazed Screw Spline Storefront PART 1 GENERAL 1.01 Work Included SECTION 08 41 1 ALUMINUM FRAMED ENTRANCES and STOREFRONTS System 402 Flush-Glazed Screw Spline Storefront A. Furnish and install aluminum architectural storefront system

More information

10, 40, 60, 80 and Additional Styles. Series. Series. Series. Series VINYL REPLACEMENT WINDOWS

10, 40, 60, 80 and Additional Styles. Series. Series. Series. Series VINYL REPLACEMENT WINDOWS Series 10, Series 40, Series 60, Series 80 and Additional Styles VINYL REPLACEMENT WINDOWS The Lansing Difference For more than 50 years, Lansing Building Products has set the standard for exceptional

More information

SECTION 08560 SERIES 1500 VINYL PATIO DOORS

SECTION 08560 SERIES 1500 VINYL PATIO DOORS SERIES 1500 VINYL PATIO DOORS PART 1 GENERAL 1.1 SECTION INCLUDES A. Patio Doors 1.2 RELATED SECTIONS A. Section 05450: Cold Formed Metal Framing. B. Section 06100: Rough Carpentry. C. Section 06200: Finish

More information

Premium Vinyl Windows and Doors for Replacement Applications

Premium Vinyl Windows and Doors for Replacement Applications 3042 MV Replacement 8/6/08 11:48 AM Page 1 Premium Vinyl Windows and Doors for Replacement Applications 3042 MV Replacement 8/6/08 11:48 AM Page 2 What s The Benefit Of ModernView Vinyl Windows? They ll

More information

vinyl replacement windows LOOKING FOR VINYL REPLACEMENT WINDOWS? Standard Features easy, trouble-free operation. window material formulated and

vinyl replacement windows LOOKING FOR VINYL REPLACEMENT WINDOWS? Standard Features easy, trouble-free operation. window material formulated and vinyl replacement windows LOOKING FOR VINYL REPLACEMENT WINDOWS? We are confident that we carry a style and size to suit your application. You can be sure that your investment will add value to your home,

More information

Reflections 5500. Vinyl Replacement Windows Reflections

Reflections 5500. Vinyl Replacement Windows Reflections Reflections 5500 Vinyl Replacement Windows Reflections 5500 Be greeted by an inspiring splash of sunlight. Be greeted by a symphony of style. Be greeted by an energy bill that makes you want to sing. What

More information

Replacement Window Installation Guide Non-Impact & Impact Resistant Windows without Nailing Fin

Replacement Window Installation Guide Non-Impact & Impact Resistant Windows without Nailing Fin Replacement Window Installation Guide Non-Impact & Impact Resistant Windows without Nailing Fin americancraftsmanwindows.com Project Requirements: Failure to follow these instructions may void product

More information

SERIES 3000/4000 DOUBLE SLIDER AND DOUBLE HUNG WINDOWS. Craftsmanship. Style. Performance.

SERIES 3000/4000 DOUBLE SLIDER AND DOUBLE HUNG WINDOWS. Craftsmanship. Style. Performance. SERIES 3000/4000 DOUBLE SLIDER AND DOUBLE HUNG WINDOWS Craftsmanship. Style. Performance. A Double Advantage Double slider and double hung window sashes both open for greater control of air movement The

More information

Quality Building Products for over 50 Years

Quality Building Products for over 50 Years Light Commercial Quality Building Products for over 50 Years Harvey Building Products is a leading manufacturer and distributor of high quality building products. We manufacture a complete line of superior

More information

TEST REPORT. Report No.: B3404.01-801-47. Rendered to: CROFT, LLC. Magnolia, Mississippi. PRODUCT TYPE: Aluminum Single Hung Window SERIES/MODEL: 95

TEST REPORT. Report No.: B3404.01-801-47. Rendered to: CROFT, LLC. Magnolia, Mississippi. PRODUCT TYPE: Aluminum Single Hung Window SERIES/MODEL: 95 Architectural Testing TEST REPORT Report No.: B3404.01-801-47 Rendered to: CROFT, LLC. Magnolia, Mississippi PRODUCT TYPE: Aluminum Single Hung Window SERIES/MODEL: 95 SPECIFICATION: AAMA/WDMA/CSA 101/I.S.2/A440-08,

More information

SECTION 08360 SECTIONAL OVERHEAD DOORS 521 SERIES ALUMINUM SECTIONAL OVERHEAD DOORS

SECTION 08360 SECTIONAL OVERHEAD DOORS 521 SERIES ALUMINUM SECTIONAL OVERHEAD DOORS SECTION 08360 SECTIONAL OVERHEAD DOORS 521 SERIES ALUMINUM SECTIONAL OVERHEAD DOORS Display hidden notes to specifier by using Tools / Options / View / Hidden Text. On newer versions of Microsoft Word

More information

THE ULTIMATE HIGH PERFORMANCE REPLACEMENT WINDOWS AND PATIO DOORS

THE ULTIMATE HIGH PERFORMANCE REPLACEMENT WINDOWS AND PATIO DOORS THE ULTIMATE HIGH PERFORMANCE REPLACEMENT WINDOWS AND PATIO DOORS EXCLUSIVELY BY NORANDEX Put our reputation in your home. At Norandex, we are proud to be a wellrespected leader in the home improvement

More information

SIZE TABLES Wood and Aluminum-Clad Exteriors Double- and Single-Hung

SIZE TABLES Wood and Aluminum-Clad Exteriors Double- and Single-Hung Double- and Single-Hung Left Right Springline Arch Head Partial Arch Head Pella Architect Series single-hung windows are available in shapes shown above, and additional custom shapes per drawing. For specifications,

More information

Series 3502 Thermal Series 3902 Fixed Thermal 3 1 4 Architectural Grade Horizontal Sliding Window

Series 3502 Thermal Series 3902 Fixed Thermal 3 1 4 Architectural Grade Horizontal Sliding Window Windows Curtain Walls Entrances Storefronts Series 3502 Thermal Series 3902 Fixed Thermal 3 1 4 Architectural Grade Horizontal Sliding Window Configurations XO OX XOX Fixed Series 3502 retains an AAMA

More information

Installation Instructions Double-Hung, Single-Hung, Casement, Awning, Sliding, Picture & Shapes Non-Impact & Impact Resistant Nailing Fin Windows

Installation Instructions Double-Hung, Single-Hung, Casement, Awning, Sliding, Picture & Shapes Non-Impact & Impact Resistant Nailing Fin Windows Installation Instructions Double-Hung, Single-Hung, Casement, Awning, Sliding, Picture & Shapes Non-Impact & Impact Resistant Nailing Fin Windows americancraftsmanwindows.com Project Requirements: Read

More information

SECTION 08 53 13 VINYL WINDOWS. A. The General Conditions, Supplementary Conditions, and Division 01 - Requirements apply.

SECTION 08 53 13 VINYL WINDOWS. A. The General Conditions, Supplementary Conditions, and Division 01 - Requirements apply. SECTION 08 53 13 VINYL WINDOWS PART 1 - GENERAL 1.1 CONDITIONS AND REQUIREMENTS A. The General Conditions, Supplementary Conditions, and Division 01 - Requirements apply. 1.2 SECTION INCLUDES A. Double

More information

Basement Window Installation Guide Hopper and Sliding

Basement Window Installation Guide Hopper and Sliding Basement Window Installation Guide Hopper and Sliding americancraftsmanwindows.com Project Requirements: Installation must comply with all applicable building codes. Existing window frame, wall and weatherresistant

More information

SECTION 08 52 00 WOOD WINDOWS (ANDERSEN ARCHITECTURAL CASEMENT AND AWNING WINDOWS)

SECTION 08 52 00 WOOD WINDOWS (ANDERSEN ARCHITECTURAL CASEMENT AND AWNING WINDOWS) SECTION 08 52 00 ( ) PART 1 - GENERAL SPECIFIER NOTE: DATA CONTAINED IN THIS GUIDE SPEC IS ACCURATE AS OF AUGUST 2007. DUE TO ONGOING PRODUCT CHANGES, THIS DATA MAY CHANGE OVER TIME. CONSULT MANUFACTURER

More information

Designed for Your Life. Guaranteed. Premium Vinyl. Replacement Windows. and Patio Doors

Designed for Your Life. Guaranteed. Premium Vinyl. Replacement Windows. and Patio Doors 5000SERIES Designed for Your Life. Guaranteed. Premium Vinyl Replacement Windows and Patio Doors 5000SERIES It s time to meet the window designed for your life. Welcome top-of-the-line energy efficiency

More information

In the Fall 2002 issue of HHE News I examined

In the Fall 2002 issue of HHE News I examined Choosing Replacement Windows 1 For Your Home Mark Pierce In the Fall 2002 issue of HHE News I examined reasons for, and against, replacing older windows with new, energy efficient windows. That article

More information

Automatic Door Selection Guide

Automatic Door Selection Guide Automatic Door Selection Guide AAADM 1300 Sumner Avenue Cleveland, OH 44115 P: 216-241-7333 F: 216-241-0105 aaadm@aaadm.com Automatic Door Selection Guide General: The members of AAADM manufacture an assortment

More information

PERFORMANCE TEST REPORT. Rendered to: GLASSCRAFT DOOR COMPANY

PERFORMANCE TEST REPORT. Rendered to: GLASSCRAFT DOOR COMPANY PERFORMANCE TEST REPORT Rendered to: GLASSCRAFT DOOR COMPANY SERIES/MODEL: Buffalo Forge Steel Doors / Round Top Single PRODUCT TYPE: In-swing Round Top Single Door RH-4 Title Uniform Load Deflection Test

More information

Quality Windows And Doors. Great Service. Exceptional Value.

Quality Windows And Doors. Great Service. Exceptional Value. Quality Windows And Doors. Great Service. Exceptional Value. As A Matter Of Fact, Our Windows And Doors Are The Best. Since 1985 North Star has been an industry leader in the manufacture of attractive

More information

Qualify for a credit of up to $1500 on your next federal tax return by purchasing energy smart products from Crestline.

Qualify for a credit of up to $1500 on your next federal tax return by purchasing energy smart products from Crestline. Qualify for a credit of up to $1500 on your next federal tax return by purchasing energy smart products from Crestline. The American Recovery and Reinvestment Act of 2009 signed on February 17th by President

More information

Astragal: a vertical member placed at the meeting edges of a double door to provide a weather seal and may be used to anchor the fixed door.

Astragal: a vertical member placed at the meeting edges of a double door to provide a weather seal and may be used to anchor the fixed door. Window and Door Dictionary AAMA: American Architectural Manufacturers Association. A national trade association that establishes voluntary standards for the window, door, and skylight industry. Ambient

More information

Sun Windows General Information Sun New Construction Window Installation Instructions

Sun Windows General Information Sun New Construction Window Installation Instructions Sun Windows General Information Section 1 G F H H H A. Apply Weather Resistive Barrier B. Apply Sill Flashing Tape C. Place Waterproof Sill Shims D. Caulk Back of Nail Fin Sides & Top, Set Window, Fasten

More information

Impact-Resistant Windows and Sliding Glass Doors

Impact-Resistant Windows and Sliding Glass Doors Impact-Resistant Windows and Sliding Glass Doors Make Your Home A SafeHarbor. SafeHarbor Impact-Resistant Windows and Sliding Glass Doors are designed to look like traditional windows and doors, but they

More information

Glossary. Argon: An inert, nontoxic gas used in insulating glass units to reduce heat transfer.

Glossary. Argon: An inert, nontoxic gas used in insulating glass units to reduce heat transfer. Glossary AAMA : American Architectural Manufacturers Association, a national trade association that established voluntary standards for the window, door and skylight industry. Argon: An inert, nontoxic

More information

Windows Vintage FUSION-WELDED VINYL TILT WINDOW SYSTEM GET THE VINTAGE ADVANTAGE...

Windows Vintage FUSION-WELDED VINYL TILT WINDOW SYSTEM GET THE VINTAGE ADVANTAGE... Windows Vintage FUSION-WELDED VINYL TILT WINDOW SYSTEM GET THE VINTAGE ADVANTAGE... B.F. Rich, a Delaware based USA manufacturer, has been an industry leader producing windows and doors since 1957. Our

More information

Flexivent Windows (1952 to 1979)

Flexivent Windows (1952 to 1979) Flexivent Windows (1952 to 1979) Parts Catalog Main Menu Section TOC Search What s in This Section Standard Windows................................................ Page 3 Parts Illustration...........................................................

More information

Sidelights & Transoms for A-Series Hinged Doors

Sidelights & Transoms for A-Series Hinged Doors Sidelights & Transoms for A-Series Hinged Doors Parts Catalog Main Menu Section TOC Search What s in This Section Sidelights & Transoms............................................. Page 3 Parts Illustration...........................................................

More information

Introduction...COMB-2 Design Considerations and Examples...COMB-3

Introduction...COMB-2 Design Considerations and Examples...COMB-3 SECTION DIRECTORY General Information Introduction...COMB-2 Design Considerations and Examples...COMB-3 Combination Assembly Recommendations and Limitations Composite Configurations...COMB-4 Typical Sealant

More information

Quality Windows And Doors. Great Service. Exceptional Value.

Quality Windows And Doors. Great Service. Exceptional Value. Quality Windows And Doors. Great Service. Exceptional Value. As A Matter Of Fact, Our Windows And Doors Are The Best. Since 1985 North Star has been an industry leader in the manufacture of attractive

More information

Combination & Screen Doors

Combination & Screen Doors Combination & Screen Doors www.bbwood.com WOOD SCREEN DOORS Removable Screens (RS) SPECIFICATIONS: Stiles and Top Rail 2-9/16 Cross Rails Bottom Rail Vertical Mull 7/8 #206 #201 58-RS 764-RS V52-RS 2 2

More information

Window Installation Instructions

Window Installation Instructions Caution The correct installation methods of windows in full frame or insert applications is critical towards achieving the tested performance of the window and longterm enjoyment and energy savings for

More information

Tuscany Series Vinyl Replacement Windows 3-Part Specification

Tuscany Series Vinyl Replacement Windows 3-Part Specification PART 1 - GENERAL SECTION 08 53 13 (Masterformat 2004 Edition) VINYL WINDOWS Tuscany is optimized for replacement applications but since it is available in multiple frame styles including nail-on fin frame,

More information

n Three 4 x 4 butt hinges per door - prevents wracking and assures smooth positive operation n Heavy duty 16 gauge steel frame

n Three 4 x 4 butt hinges per door - prevents wracking and assures smooth positive operation n Heavy duty 16 gauge steel frame Weather Fin and bulb help keep bad weather outside and good air inside Windows: n Many light kits are available 1-LU 4 X 48 1-LE 16 X 16 1-LA 20 X 24 1-LI 20 X 24 1-B 22 X 36 1-LW 16 X 16 W/GRID 9-LB 22

More information

Vinyl Patio Door Systems

Vinyl Patio Door Systems Vinyl Patio Door Systems Swing Patio Door Multi-point locking system anchors the door in three separate points along the door length. Activating the deadbolt lock provides maximum security. Swing Patio

More information

Designed for Your Life. Guaranteed. Premium Vinyl. Replacement Windows. and Patio Doors

Designed for Your Life. Guaranteed. Premium Vinyl. Replacement Windows. and Patio Doors 9000SERIES Designed for Your Life. Guaranteed. Premium Vinyl Replacement Windows and Patio Doors Double Hungs 9000SERIES NEW COPY HAS BEEN INSERTED 3/11/14 At Thermal Windows and Doors, we design premium

More information

INSTALLATION INSTRUCTIONS for Premium Pocket Windows (JII022) IMPoRtaNt INFoRMatIoN & glossary. safety & HaNdlINg

INSTALLATION INSTRUCTIONS for Premium Pocket Windows (JII022) IMPoRtaNt INFoRMatIoN & glossary. safety & HaNdlINg Thank you for selecting JeLd-weN products. Attached are JeLd-weN s recommended installation instructions for pocket (replacement) double-hung, casement, awning, picture or transom windows, designed to

More information

AAMA/WDMA/CSA 101/I.S.2/A440-05 TEST REPORT. Rendered to: EAGLE WINDOW & DOOR COMPANY

AAMA/WDMA/CSA 101/I.S.2/A440-05 TEST REPORT. Rendered to: EAGLE WINDOW & DOOR COMPANY Architectural Testing AAMA/WDMA/CSA 101/I.S.2/A440-05 TEST REPORT Rendered to: EAGLE WINDOW & DOOR COMPANY SERIES/MODEL: Series 01 Axiom Clad One-Piece Casement Fixed 6060 PRODUCT TYPE: Aluminum Clad Fixed

More information

Accessory Windows. Replacement and New Construction

Accessory Windows. Replacement and New Construction Accessory Windows Replacement and New Construction Casement Things couldn t be easier with our beautiful and functional vinyl casement windows. There s no need to stretch to reach a top lock because the

More information

Sample Calculations...V-CR-12. Door and Window Typical Combinations... V-CR-12 Horizontal and Vertical Typical Combinations...

Sample Calculations...V-CR-12. Door and Window Typical Combinations... V-CR-12 Horizontal and Vertical Typical Combinations... SECTION DIRECTORY General Information Definitions...V-CR- Design Considerations...V-CR- Composite Configurations...V-CR-4 Design Considerations and Examples for Typical Window and Door Combinations...V-CR-5

More information

Open Up Your Space, Add Light Series 2050 and Series 2050i Garden Windows

Open Up Your Space, Add Light Series 2050 and Series 2050i Garden Windows Open Up Your Space, Add Light Series 2050 and Series 2050i Garden Windows Series 2050 Garden Window The Series 2050 standard garden window has an outstanding reputation for its distinctive design and excellent

More information

Thermal Breakage Prediction

Thermal Breakage Prediction Thermal Breakage Prediction The prediction of glass breakage due to thermal stress is an important analysis for the longevity of a window. Thermal breakage occurs when there is a large temperature differential

More information

Imagine. the transformations that are possible! Add Style & Value to Your Home Cut Energy Costs Drastically Reduce Upkeep

Imagine. the transformations that are possible! Add Style & Value to Your Home Cut Energy Costs Drastically Reduce Upkeep Imagine the transformations that are possible! Add Style & Value to Your Home Cut Energy Costs Drastically Reduce Upkeep Let the world see your home as yours alone, renovated to suit your mood, your desire,

More information

Gliding Windows Premium Vinyl

Gliding Windows Premium Vinyl TABL OF CONTNTS Product Specifications... 6-2 QuickSpecGuide... 6-3 levations/sizes: 1/4 Scale 2 Wide Gliding Window... 6-4 3 Wide Gliding Window... 6-8 SashGlazingOptions:3 Scale... 6-10 Grilles & SDL

More information

2.02. Specifications. General. Products. Execution. Offset Pivots P-694 Top and Bottom Pivots

2.02. Specifications. General. Products. Execution. Offset Pivots P-694 Top and Bottom Pivots 2.02 Standard Specifications General Entrances Description Furnish all necessary materials, labor and equipment for the complete installation of aluminum entrance doors, door frames and hardware as shown

More information

Strength, Style and Security for your home and family

Strength, Style and Security for your home and family Strength, Style and Security for your home and family NEW and IMPROVED DOORS 2013 John Cannon Homes, Inc. The Amarina Why Sentinel Impact Resistant Windows and Doors? Sentinel by CGI has received the prestigious

More information

Product Feature Guide 3/4 Insulated Glass 6000 4000 2000 1000

Product Feature Guide 3/4 Insulated Glass 6000 4000 2000 1000 The Falcon eries... ettin Product Feature Guide 3/4 Insulated Glass 6000 4000 2000 1000 Clear Emax PLus Emax Ultra * Bronze Tint Grey Tint bscure Glass Tempered Glass pacer ystem Intercept uperpacer Vinyl

More information

TEST REPORT. Rendered to: INTERNATIONAL WINDOW Hayward, California. PRODUCT TYPE: Aluminum Hopper SERIES/MODEL: 7222

TEST REPORT. Rendered to: INTERNATIONAL WINDOW Hayward, California. PRODUCT TYPE: Aluminum Hopper SERIES/MODEL: 7222 Architectural Testing TEST REPORT Report No.: C2375.01-301-44 Rendered to: INTERNATIONAL WINDOW Hayward, California PRODUCT TYPE: Aluminum Hopper SERIES/MODEL: 7222 SPECIFICATIONS: AAMA/WDMA/CSA 101/I.S.2/A440-05,

More information

DISPLAY UNIT LABELING GUIDELINES FOR MANUFACTURERS AND RETAILERS

DISPLAY UNIT LABELING GUIDELINES FOR MANUFACTURERS AND RETAILERS ENERGY STAR FOR WINDOWS, DOORS, AND SKYLIGHTS DISPLAY UNIT LABELING GUIDELINES FOR MANUFACTURERS AND RETAILERS CONTENTS Objective................................ page 1 Definitions.....................................

More information

Assessing Curtain Walls

Assessing Curtain Walls Assessing Curtain Walls Considerations and Best Practices Paul E Beers GCI Consultants, LLC pbeers@gciconsultants.com What is a Curtain Wall System? A curtain wall system is an outer covering of a building

More information

THE ULTIMATE HIGH PERFORMANCE REPLACEMENT WINDOWS AND PATIO DOORS

THE ULTIMATE HIGH PERFORMANCE REPLACEMENT WINDOWS AND PATIO DOORS THE ULTIMATE HIGH PERFORMANCE REPLACEMENT WINDOWS AND PATIO DOORS EXCLUSIVELY BY NORANDEX Peace of mind? It starts here. Norandex is known throughout the home improvement industry for integrity and commitment

More information

Installer Training and Certification Overview

Installer Training and Certification Overview Installer Training and Certification Overview Outline of This Presentation The Need for a Training Program The History of the Program Details of the Training Program The Certification Process The Need

More information

ASTM E 1886 and ASTM E 1996 TEST REPORT. Rendered to: Atrium Companies, Inc. SERIES/MODEL: 50/305 HS PRODUCT TYPE: Vinyl Horizontal Slider

ASTM E 1886 and ASTM E 1996 TEST REPORT. Rendered to: Atrium Companies, Inc. SERIES/MODEL: 50/305 HS PRODUCT TYPE: Vinyl Horizontal Slider ASTM E 1886 and ASTM E 1996 TEST REPORT Rendered to: Atrium Companies, Inc. SERIES/MODEL: 50/305 HS PRODUCT TYPE: Vinyl Horizontal Slider Report No.: Test Date: 5/21/07 Through: 5/23/07 Report Date: 5/30/07

More information

SECTION 08332 COILING COUNTER DOORS. Display hidden notes to specifier. (Don't know how? Click Here)

SECTION 08332 COILING COUNTER DOORS. Display hidden notes to specifier. (Don't know how? Click Here) SECTION 08332 COILING COUNTER DOORS Display hidden notes to specifier. (Don't know how? Click Here) PART 1 GENERAL 1.1 SECTION INCLUDES A. Coiling Metal Counter Doors. B. Coiling Counter Fire Doors. 1.2

More information

PART 1 GENERAL 1.1 SECTION INCLUDES

PART 1 GENERAL 1.1 SECTION INCLUDES J-1 Section 09110 Long Form Specification INTERIOR METAL STUD FRAMING This section includes lightweight, usually 0.036 inch (0.9 mm) thick or lighter, non-axial load bearing metal stud framing including

More information

GENEVA HISTORIC PRESERVATION COMMISSION Policy Guide for Window Repair or Replacement Requests

GENEVA HISTORIC PRESERVATION COMMISSION Policy Guide for Window Repair or Replacement Requests GENEVA HISTORIC PRESERVATION COMMISSION Policy Guide for Window Repair or Replacement Requests 1. Contributing (or higher rated) buildings, Residential and Commercial. Thoroughly assess the condition of

More information

WINDOW INSTALLATION GUIDE

WINDOW INSTALLATION GUIDE WINDOW INSTALLATION GUIDE is not responsible for or liable for any use or misuse of the information contained in this window installation guide. Window Installation Guide This guide provides basic information

More information

Garden Window. Montecito Series Vinyl Garden Window Architectural Manual

Garden Window. Montecito Series Vinyl Garden Window Architectural Manual Montecito Series Vinyl The offers the outstanding insulating properties, low maintenance, and contemporary aesthetic appeal only vinyl can provide. Available in White and Tan homogenous window frames,

More information

Installation Detailed installation instructions are provided which should be strictly followed.

Installation Detailed installation instructions are provided which should be strictly followed. Specification System 6 The Metal Technology Thermally-Broken Vertical Slide Window has been designed in such a way that its'attractive and clean lines will enhance all types of residential and commercial

More information

ASTM E 1886 / ASTM E 1996 AND ASTM E 283, ASTM E 330, ASTM E 331 TEST REPORT. Rendered to: BEKAERT SPECIALTY FILMS, LLC

ASTM E 1886 / ASTM E 1996 AND ASTM E 283, ASTM E 330, ASTM E 331 TEST REPORT. Rendered to: BEKAERT SPECIALTY FILMS, LLC ASTM E 1886 / ASTM E 1996 AND ASTM E 283, ASTM E 330, ASTM E 331 TEST REPORT Rendered to: BEKAERT SPECIALTY FILMS, LLC SERIES/MODEL: Panorama 8-mil Film PRODUCT TYPE: Fixed Window with Applied Film This

More information

Guide to Ordering Hurd Replacement Glass, Sash, or Window & Door Parts

Guide to Ordering Hurd Replacement Glass, Sash, or Window & Door Parts Guide to Ordering urd Replacement, Sash, or indow & Door Parts If you have this form in hand, you are in need of a replacement part for your urd window or door. And, your first question is likely, how

More information

Active and Passive Sash Replacement

Active and Passive Sash Replacement for Andersen Gliding Windows Read all instructions carefully before attempting this procedure. If you have any questions about your ability to complete the procedure, call Andersen at 1-888-888-7020 for

More information

Clad Direct Glaze Window Installation Instructions

Clad Direct Glaze Window Installation Instructions Clad Direct Glaze Window Installation Instructions Sill flashing and sealing: 2. An overview of the proper flashing sequence is shown in figure 1. Please read entire installation instructions carefully

More information

Series 5100 Vinyl Replacement

Series 5100 Vinyl Replacement Series 5100 Vinyl Replacement Windows Series 5100 For remodeling projects which call for the classic styling of double hung or the convenience of sliding windows, look no further than the 5100 series for

More information

CLEAR-DIVISIONS CENTERFOLD

CLEAR-DIVISIONS CENTERFOLD CLEAR-DIVISIONS CENTERFOLD Introduction: The following three (3) part specification offers the Standard and Optional features for the CLEAR-DIVISIONS CENTERFOLD moveable The yellow highlighted areas in

More information

Installation Guide for Andersen Architectural Clad Outswing Commercial Doors

Installation Guide for Andersen Architectural Clad Outswing Commercial Doors Installation Guide for Andersen Architectural Clad Outswing Commercial Doors Congratulations! You have just purchased one of the many fine Andersen products. Proper assembly, installation and maintenance

More information

Installation Guide for Andersen Architectural Wood Inswing Entry Doors

Installation Guide for Andersen Architectural Wood Inswing Entry Doors Installation Guide for Andersen Architectural Wood Inswing Entry Doors Congratulations! You have just purchased one of the many fine Andersen products. Proper assembly, installation and maintenance are

More information

JANUARY, 2016 TR-7100 Windows (Fixed) 1 EC 97909-071 085113 ALUMINUM WINDOWS Guide Specs

JANUARY, 2016 TR-7100 Windows (Fixed) 1 EC 97909-071 085113 ALUMINUM WINDOWS Guide Specs JANUARY, 2016 TR-7100 Windows (Fixed) 1 EC 97909-071 085113 ALUMINUM WINDOWS Guide Specs SECTION 085113 ALUMINUM WINDOWS This suggested guide specification has been developed using the current edition

More information

Insider Tips for Purchasing Replacement Windows

Insider Tips for Purchasing Replacement Windows Insider Tips for Purchasing Replacement Windows From the experts at Legacy Remodeling WE SPEAK REMODELING Table of Contents Introduction Page 3 Window Styles Page 4 Window Materials Page 6 Window Efficiency

More information

MANCHESTER SERIES(SGD-R35) SLIDING GLASS DOOR 5 5/8 FRAME DEPTH

MANCHESTER SERIES(SGD-R35) SLIDING GLASS DOOR 5 5/8 FRAME DEPTH MANCHESTER SERIES(SGD-R35) SLIDING GLASS DOOR 5 5/8 FRAME DEPTH FEATURES 1.) Available Configurations -Sliding Glass Door -Geometric shapes -OX, XO, OXO, OXXO, XOO, OOX (as viewed from exterior) 2.) Main

More information

Enjoy the view. THE AMCRAFT GRAND ESTATES VINYL WINDOW AND PATIO DOOR COLLECTION

Enjoy the view. THE AMCRAFT GRAND ESTATES VINYL WINDOW AND PATIO DOOR COLLECTION Enjoy the view. THE AMCRAFT GRAND ESTATES VINYL WINDOW AND PATIO DOOR COLLECTION Grand Estates Windows & Doors Home building and remodeling is what you make it and Amcraft makes it easy. For over two decades

More information

Window Types and Materials

Window Types and Materials Window Types and Materials There are many window designs in use today: a) Awnings (Top-Hinged) b) Casement (Side-Hinged) c) Picture (Fixed) d) Horizontal Slider e) Single Hung f) Double Hung g) Tilt and

More information

Tundra Series Windows January 2016

Tundra Series Windows January 2016 Tundra Series Windows January 2016 New Construction Installation Instructions Nail Fin, J-Fin and Brickmold Aplications product. ATTENTION! Read and understand all installation instructions before installing

More information

T H E A A M A C E R T I F I C A T I O N P R O G R A M

T H E A A M A C E R T I F I C A T I O N P R O G R A M T H E A A M A C E R T I F I C A T I O N P R O G R A M AAMA STANDS FOR QUALITY Since 1962, AAMA Certification, the original third-party window performance program, has provided manufacturers with the means

More information

Sleek, elegant, handcrafted, energy-efficient replacement vinyl windows that enhance the beauty of your home.

Sleek, elegant, handcrafted, energy-efficient replacement vinyl windows that enhance the beauty of your home. Sleek, elegant, handcrafted, energy-efficient replacement vinyl windows that enhance the beauty of your home. Page 2 of 16 SeriousWindows 501 Series Windows and Doors Performance and Durability in an Elegant

More information

Sash or Balancer Replacement Guide

Sash or Balancer Replacement Guide or Replacement Guide for Andersen 200 Series Tilt-Wash Double-Hung Windows or Replacement Guide Read all instructions carefully before attempting this procedure. If you have any questions about your ability

More information

PERFORMANCE TEST REPORT. Rendered to: GLASSCRAFT DOOR COMPANY

PERFORMANCE TEST REPORT. Rendered to: GLASSCRAFT DOOR COMPANY Architectural Testing PERFORMANCE TEST REPORT Rendered to: GLASSCRAFT DOOR COMPANY SERIES/MODEL: Mahogany Entry Door PRODUCT TYPE: 6' x 8' Double Outswing Hardwood TDL Door with Half Circle TDL Transom

More information

TEST REPORT. Report No.: A9814.01 109 44. Rendered to: BAMCO INC. Middlesex, New Jersey. PRODUCT TYPE: Wall Cladding System SERIES/MODEL: Dry Concept

TEST REPORT. Report No.: A9814.01 109 44. Rendered to: BAMCO INC. Middlesex, New Jersey. PRODUCT TYPE: Wall Cladding System SERIES/MODEL: Dry Concept Architectural Testing TEST REPORT Report No.: A9814.01 109 44 Rendered to: BAMCO INC. Middlesex, New Jersey PRODUCT TYPE: Wall Cladding System SERIES/MODEL: Dry Concept AAMA 508 07, Voluntary Test Method

More information

WINDOWS AND PATIO DOORS

WINDOWS AND PATIO DOORS LAKE BARRINGTON COMMUNITY HOMEOWNERS ASSOCIATION 64 Old Barn Road Lake Barrington, Illinois 60010 Phone: 847-382-1660 Fax: 847-382-2731 HOMEOWNER APPLICATION FOR ARCHITECTURAL REVIEW WINDOWS AND PATIO

More information

Eggers meticulously-crafted door frames are rivaled only by their beauty, quality and lasting performance. Turning nature s beauty into works of art

Eggers meticulously-crafted door frames are rivaled only by their beauty, quality and lasting performance. Turning nature s beauty into works of art D O O R F R A M E S Eggers meticulously-crafted door frames are rivaled only by their beauty, quality and lasting performance. Turning nature s beauty into works of art D O O R F R A M E S Eggers Industries

More information

Sierra Pacific Windows

Sierra Pacific Windows Sierra Pacific Windows Bi-Fold Windows & Doors Sierra Pacific Bi-fold Windows and Doors glide smoothly to create large openings that transform your living spaces. With panels folding and stacking either

More information

ALUMINUM Guide Spec: Standard Aluminum Windows & Doors

ALUMINUM Guide Spec: Standard Aluminum Windows & Doors ALUMINUM Guide Spec: Standard Aluminum Windows & Doors Standard Aluminum Windows ALUMINUM WINDOWS - 08 51 13 With the thin lines that Migard s Aluminum Windows provide, they are ideal for both new construction

More information

CLAIM FORM APPENDIX. I. Photographs Identifying The Windows

CLAIM FORM APPENDIX. I. Photographs Identifying The Windows CLAIM FORM APPENDIX I. Photographs Identifying The Windows The Settlement provides compensation for MIWD Products that are glazed with Glazing Tape and were manufactured or sold between July 1, 2000 and

More information

Sun Vinyl New Construction Windows Homeowner's Warranty

Sun Vinyl New Construction Windows Homeowner's Warranty Sun Windows Sun Vinyl New Construction Windows Homeowner's Warranty Vinyl Sun Windows, Inc. warrants for a period of 2 years that the quality of workmanship and materials of vinyl items shall be free from

More information

MOCK-UP TEST REPORT. Rendered to: TUBELITE, INC. PROJECT: 200 Series Curtain Wall Mock-Up

MOCK-UP TEST REPORT. Rendered to: TUBELITE, INC. PROJECT: 200 Series Curtain Wall Mock-Up MOCK-UP TEST REPORT Rendered to: TUBELITE, INC. PROJECT: 200 Series Curtain Wall Mock-Up Report No: 85616.01-120-32 Test Completion Date: 01/15/09 Report Date: 02/11/09 Record Retention End Date: 01/15/13

More information

PERFORMANCE TEST REPORT. Rendered to: UNITED STATES ALUMINUM CORPORATION. SERIES/MODEL: 450 Center Glaze PRODUCT TYPE: Aluminum Curtain Wall

PERFORMANCE TEST REPORT. Rendered to: UNITED STATES ALUMINUM CORPORATION. SERIES/MODEL: 450 Center Glaze PRODUCT TYPE: Aluminum Curtain Wall Architectural Testing PERFORMANCE TEST REPORT Rendered to: UNITED STATES ALUMINUM CORPORATION SERIES/MODEL: 450 Center Glaze PRODUCT TYPE: Aluminum Curtain Wall Title Summary of Results Air Infiltration

More information

Andersen Clad Inswing Entry Doors (2001 to Present)

Andersen Clad Inswing Entry Doors (2001 to Present) Andersen Clad Inswing Entry Doors (2001 to Present) What s in This Section Clad Inswing Entry Doors Page 3 Part Illustrations 3 Parts Illustration - Single Door 3 Parts Illustration - Double Door 4 Parts

More information

Improving Your View of the World. Series 8700 Vinyl Replacement Windows

Improving Your View of the World. Series 8700 Vinyl Replacement Windows Improving Your View of the World Series 8700 Vinyl Replacement Windows Double-Hung Vinyl Replacement Series 8700 Window A Commitment to Excellence Since 1948 The Vinyl Advantage Vinyl is the ideal material

More information

Evaluating the Field Performance of Windows and Curtain Walls of Large Buildings

Evaluating the Field Performance of Windows and Curtain Walls of Large Buildings Best2 Airtightness of Buildings Session WB6-2 Evaluating the Field Performance of Windows and Curtain Walls of Large Buildings Mario D. Gonçalves, Patenaude-Trempe and Robert Jutras, Air-Ins Introduction

More information