DATA SHEET SURFACE MOUNT MULTILAYER CERAMIC CAPACITORS General purpose & High capacitance Class 2, X5R
|
|
|
- Willis Gordon
- 7 years ago
- Views:
Transcription
1 Product Specification January 12, 2017 V.23 DATA SHEET SURFACE MOUNT MULTILAYER CERAMIC CAPACITORS General purpose & High capacitance Class 2, 4 V TO 50 V 100 pf to 220 µf RoHS compliant & Halogen free
2 Product specification 2 Surface Mount Multilayer Ceramic Capacitors SCOPE This specification describes series chip capacitors with leadfree terminations. APPLICATIONS PCs, Hard disk, Game PCs Power supplies DVD players Mobile phones Data processing FTURES Supplied in tape on reel Nickel-barrier end termination RoHS compliant Halogen free compliant ORDERING INFORMATION - GLOBAL PART NUMBER, PHYCOMP CTC & 12NC All part numbers are identified by the series, size, tolerance, TC material, packing style, voltage, process code, termination and capacitance value. YAGEO BRAND ordering code GLOBAL PART NUMBER (PREFERRED) CC XXXX X X X BB XXX (1) (2) (3) (4) (5) (1) SIZE INCH BASED (METRIC) 0201 (0603) 0402 (1005) 0603 (1608) 0805 (2012) 1206 (3216) 1210 (3225) (2) TOLERANCE K = ± 10% M = ± 20% (3) PACKING STYLE R = Paper/PE taping reel; Reel 7 inch K = Blister taping reel; Reel 7 inch P = Paper/PE taping reel; Reel 13 inch F = Blister taping reel; Reel 13 inch C = Bulk case (4) RATED VOLTAGE 4 = 4 V 5 = 6.3 V 6 = 10 V 7 = 16 V 8 = 25 V 9 = 50 V (5) CAPACITANCE VALUE 2 significant digits+number of zeros The 3rd digit signifies the multiplying factor, and letter R is decimal point Example: 103 = 10 x 10 3 = 10,000 pf = 10 nf
3 Product specification 3 Surface Mount Multilayer Ceramic Capacitors CONSTRUCTION The capacitor consists of a rectangular block of ceramic dielectric in which a number of interleaved metal electrodes are contained. This structure gives rise to a high capacitance per unit volume. The inner electrodes are connected to the two end terminations and finally covered with a layer of plated tin (NiSn). The terminations are lead-free. A cross section of the structure is shown in Fig.1. Fig. 1 Surface mount multilayer ceramic capacitor construction DIMENSION Table 1 For outlines see fig. 2 OUTLINES TYPE L 1 (mm) W (mm) T (MM) L 2 / L 3 (mm) L 4 (mm) min. max. min. DIMENSION CODE For dimension see Table ± ± ± BA 0.6 ± ± ± BB 0.6 ± ± ± BC 0.6 ± ± ± BD 1.0 ± ± ± CA 1.0 ± ± ± CB 1.0 ± ± ± CC 1.0 ± ± ± CD 1.6 ± ± ± DA 1.6 ± ± ± DB 1.6 ± ± ± DC 2.0 ± ± ± ± ± ± ± ± ± FA 3.2 ± ± ± FB 3.2 ± ± ± FC 3.2 ± ± ± FD 3.2 ± ± ± GA 3.2 ± ± ± GB 3.2 ± ± ± GC 3.2 ± ± ± GD Fig. 2 Surface mount multilayer ceramic capacitor dimension
4 Product specification 4 CAPACITANCE RANGE & THICKNESS FOR Table 2 Sizes from 0201 to 0402 CAP V 6.3 V 10 V 16 V 25 V 50 V 4 V 6.3 V 10 V 16 V 25 V 50 V 100 pf BA BA BA BA BA 150 pf BA BA BA BA BA 220 pf BA BA BA BA BA 330 pf BA BA BA BA BA 470 pf BA BA BA BA BA 680 pf BA BA BA BA BA 1.0 nf BA BA BA BA BA 1.5 nf BA BA BA BA 2.2 nf BA BA BA BA 3.3 nf BA BA BA BA 4.7 nf BA BA BA BA 6.8 nf BA BA BA BA 10 nf BA BA BA BA 15 nf BA BA BA 22 nf BA BA BA BA CA CA CA CA CA 33 nf BA BA BA CA CA CA CA CA 47 nf BA BA BA CA CA CA CA CA 68 nf BA BA BA CA CA CA CA CA 100 nf BA BA BA BB CA CA CA CA CA 150 nf CA CA CA CA CA 220 nf BA BA BA BA CA CA CA CA CA 330 nf CA CA 470 nf BA BA BA BA CA CA CB CB CB 680 nf CA CA 1.0 µf BB BB BB CA CA CA CA 2.2 µf BC BC BC CA CA CC CD 4.7 µf BD CC CC CC CC 10 µf CD CD CD 22 µf CD CD NOTE 1. Values in shaded cells indicate thickness class in mm 2. Capacitance value of non E-6 series is available on request
5 Product specification 5 CAPACITANCE RANGE & THICKNESS FOR Table 3 Sizes from 0603 to 0805 CAP V 6.3 V 10 V 16 V 25 V 50V 4V 6.3 V 10 V 16 V 25 V 50V 10 nf 15 nf 22 nf 33 nf 47nF 68 nf 100 nf 150 nf 220 nf DA DA DA DA DA 330 nf DA DA DA DA DA 470 nf DA DA DA DA DA 680 nf DA DA DA DA DA 1.0 µf DA DA DA DA DA 2.2 µf DA DA DA DB DC 4.7 µf DA DA DB DB 10 µf DB DC DC DC 22 µf DC DC 47 µf DC DC 100 µf NOTE 1. Values in shaded cells indicate thickness class in mm 2. Capacitance value of non E-6 series is available on request
6 Product specification 6 Table 4 Sizes from 1206 to 1210 CAP V 6.3 V 10 V 16 V 25 V 50V 6.3 V 10 V 16 V 25 V 50V 10 nf 15 nf 22 nf 33 nf 47nF 68 nf 100 nf 150 nf 220 nf 330 nf 470 nf 680 nf 1.0 µf FA FA FA FA FC GA GA GA GA GA 2.2 µf FA FA FA FA FC GB GB GB GB GB 4.7 µf FC FC FC FC FC GB GB GB GB GC 10 µf FC FC FC FC FD GB GB GB GB GC 22 µf FC FC FC FD GC GC GC GD 47 µf FC FC FD GC GC GC 100 µf FD GD GD GD 220 µf FD GD NOTE 1. Values in shaded cells indicate thickness class in mm 2. Capacitance value of non E-6 series is available on request
7 Product specification 7 THICKNESS CLASSES AND PACKING QUANTITY Table 5 SIZE CODE THICKNESS CLASSIFICATION TAPE WIDTH QUANTITY PER REEL Ø 0 MM / 7 INCH Ø 330 MM / 13 INCH Paper Blister Paper Blister QUANTITY PER BULK CASE ± 0.03 mm 8 mm 15, , ± 0.05 / 0.1 mm 8 mm 10, , , ± 0.15 / 0.2 mm 8 mm 10, , ± 0.1 mm 8 mm 4, , , ± 0.1 mm 8 mm 4, , , ± 0.1 mm 8 mm 4, , , ± 0.2 mm 8 mm --- 3, ,000 5, ± 0.1 mm 8 mm 4, , ± 0.1 mm 8 mm 4, , / 1.15 ± 0.1 mm 8 mm --- 3, , ± 0.2 mm 8 mm --- 3, , ± 0.15 mm 8 mm --- 2, , ± 0.2 mm 8 mm --- 2, , / 0.7 ± 0.1 mm 8 mm --- 4, , ± 0.1 mm 8 mm --- 4, , ± 0.1 mm 8 mm --- 3, , ± 0.15 mm 8 mm --- 3, , ± 0.2 mm 8 mm --- 3, ± 0.1 mm 8 mm --- 2, / 1.9 ± 0.2 mm 8 mm --- 2, ± 0.2 mm 8 mm ± 0.2 mm 8 mm --- 2,000 1,000 1,
8 Product specification 8 ELECTRICAL CHARACTERISTICS DIELECTRIC CAPACITORS; NISN TERMINATIONS Unless otherwise specified, all tests and measurements shall be made under standard atmospheric conditions for testing as given in 5.3 of IEC : - Temperature: 15 C to 35 C - Relative humidity: 25% to 75% - Air pressure: 86 kpa to 106 kpa Before the measurements are made, the capacitor shall be stored at the measuring temperature for a time sufficient to allow the entire capacitor to reach this temperature. The period as prescribed for recovery at the end of a test is normally sufficient for this purpose. DESCRIPTION VALUE Capacitance range 100 pf to 220 µf Capacitance tolerance ± 10% and ± 20% Dissipation factor (D.F.) D.F. 6.3V 100pF to 10nF 22nF to 100nF 220nF to 1uF 470nF to 680nF 1uF to 10uF 1uF to 10uF 5% 120nF to 220nF 22uF 7% 12nF to 1uF 330nF to 10uF 2.2uF to 47uF 1uF to 100uF 22uF to 47uF 47uF to 220uF 10% 2.2uF 100uF, 220uF 15% 4.7uF 22uF 20% 10V 100pF to 10nF 22nF to 100nF 220nF to 470nF 470nF to 680nF 1uF to 4.7uF 1uF to 4.7uF 5% 120nF to 220nF 680nF 1uF 7% 12nF to 220nF, 1uF 330nF to 10uF 1uF to 22uF 2.2uF to 47uF 10uF to 47uF 10uF to 100uF 10% 470nF 15% 2.2uF 20% 16V 100pF to 10nF 22nF to 100nF 220nF to 470nF 470nF to 680nF 1uF to 4.7uF 1uF to 4.7uF 5% 120nF to 220nF 680nF to 1uF 1 uf to 2.2μF 7% 12nF to 220nF 470nF to 4.7uF 2.2uF to 10uF 4.7uF to 22uF 10uF to 47uF 10uF to 100uF 10% 470nF 20% 25V 100pF to 10nF 22nF 470nF to 1uF 1uF to 2.2uF 1uF to 4.7uF 3.5% 27nF to 100nF 220nF to 470nF 2.2uF 4.7uF 10uF 5% 120nF to 220nF 680nF to 1uF 7% 22nF, 100nF 470nF to 2.2uF 2.2uF to 10uF 4.7uF to 22uF 10uF to 22uF 22uF 10% 50V 100pF to 1nF 22nF 3.5% 27nF to 120nF 5% 150nF to 220nF 7% 470nF 220nF to 2.2uF 470nF to 10uF 1uF to 10uF 1uF to 10uF 10% Insulation resistance after 1 minute at Ur (DC) Rins 10 GΩ or Rins Cr 500(50)* seconds whichever is less Maximum capacitance change as a function of temperature (temperature Operating temperature characteristic/coefficient): range: NOTE Table 6 * For individual I.R specification, please contact local sales. ± 15% 55 C to +85 C
9 Product specification 9 Fig. 3 Typical capacitance change as a function of temperature
10 Product specification 10 Size nf / 16 V Solid lines: Impedance / Dotted lines: ESR Fig. 4 Impedance ESR vs. frequency characteristics for multilayer chip capacitors Size µf / 10 V Solid lines: Impedance / Dotted lines: ESR Fig. 5 Impedance ESR vs. frequency characteristics for multilayer chip capacitors
11 Product specification 11 Size µf / 6.3 V Solid lines: Impedance / Dotted lines: ESR Fig. 6 Impedance ESR vs. frequency characteristics for multilayer chip capacitors Size µf / 16 V Solid lines: Impedance / Dotted lines: ESR Fig. 7 Impedance ESR vs. frequency characteristics for multilayer chip capacitors
12 Product specification 12 Size µf / 25 V Solid lines: Impedance / Dotted lines: ESR Fig. 8 Impedance ESR vs. frequency characteristics for multilayer chip capacitors SOLDERING RECOMMENDATION Table 7 SOLDERING METHOD SIZE Reflow Reflow only > 100 nf > 1µF > 2.2 µf > 2.2 µf Reflow only Reflow/Wave 100 nf 1µF 2.2 µf 2.2 µf ---
13 Product specification 13 TESTS AND REQUIREMENTS Table 8 Test procedures and requirements TEST TEST METHOD PROCEDURE REQUIREMENTS Mounting IEC / The capacitors may be mounted on printed-circuit boards or ceramic substrates No visible damage Visual Inspection and Dimension Check 4.4 Any applicable method using 10 magnification In accordance with specification Capacitance (1) Class 2: At 20 C, 24 hrs after annealing f = 1 KHz for C 10 µf, rated voltage > 6.3 V, measuring at voltage 1 V rms at 20 C f = 1 KHz, for C 10 µf, rated voltage 6.3 V, measuring at voltage 0.5 V rms at 20 C f = 120 Hz for C > 10 µf, measuring at voltage 0.5 V rms at 20 C Within specified tolerance Dissipation Factor (D.F.) (1) Class 2: At 20 C, 24 hrs after annealing f = 1 KHz for C 10 µf, rated voltage > 6.3 V, measuring at voltage 1 V rms at 20 C f = 1 KHz, for C 10 µf, rated voltage 6.3 V, measuring at voltage 0.5 V rms at 20 C f = 120 Hz for C > 10 µf, measuring at voltage 0.5 V rms at 20 C In accordance with specification Insulation Resistance At U r (DC) for 1 minute In accordance with specification NOTE 1. The figure indicates typical inspection. Please refer to individual specifications.
14 Product specification 14 TEST TEST METHOD PROCEDURE REQUIREMENTS Temperature Characteristic 4.6 Capacitance shall be measured by the steps shown in the following table. The capacitance change should be measured after 5 min at each specified temperature stage. Step a 25± 2 Temperature( ) b Lower temperature± 3 c 25± 2 d Upper Temperature± 2 e 25± 2 (1) Class I Temperature Coefficient shall be calculated from the formula as below C2 - C1 6 Temp, Coefficient = 10 [ppm/ ] C1xΔT C1: Capacitance at step c C2: Capacitance at 125 T: 100 (= ) <General purpose series> Class1: C/C: ± 30ppm X7R: C/C: ± 15% Y5V: C/C: 22~-82% <High Capacitance series> X7R/: C/C: ±15% Y5V: C/C: 22~-82% (2) Class II Capacitance Change shall be calculated from the formula as below C2 - C1 C = x 100% C1 C1: Capacitance at step c C2: Capacitance at step b or d Adhesion 4.7 A force applied for 10 seconds to the line joining the terminations and in a plane parallel to the substrate Bending Strength IEC /22 Force size 0603: 5N size = 0402: 2.5N size = 0201: 1N 4.8 Mounting in accordance with IEC paragraph 4.3 No visible damage Conditions: bending 1 mm at a rate of 1 mm/s, radius jig 5 mm Test Substrate: b 4.5 YNSC147 C/C : ± 12.5% Dimension(mm) Type a b c C a Unit: mm
15 Product specification 15 Surface Mount Multilayer Ceramic Capacitors TEST TEST METHOD PROCEDURE REQUIREMENTS Resistance to Soldering Heat 4.9 Precondition: / 10 C for 1 hour, then keep for 24 ± 1 hours at room temperature Preheating: for size 1206: 120 C to 150 C for 1 minute Preheating: for size >1206: 100 C to 120 C for 1 minute and 170 C to 200 C for 1 minute Solder bath temperature: 260 ± 5 C Dipping time: 10 ± 0.5 seconds Recovery time: 24 ±2 hours Dissolution of the end face plating shall not exceed 25% of the length of the edge concerned <General purpose series> C/C : ± 10% <High Capacitance series> C/C : ± 10% D.F. within initial specified value R ins within initial specified value Solderability 4.10 Preheated the temperature of 80 C to 140 C and maintained for 30 seconds to 60 seconds. The solder should cover over 95% of the critical area of each termination 1. Temperature: 235± 5 C / Dipping time: 2 ± 0.5 s 2. Temperature: 245± 5 C / Dipping time: 3 ± 0.5 s (lead free) Depth of immersion: 10mm Rapid Change of Temperature IEC / Preconditioning; / 10 C for 1 hour, then keep for 24 ± 1 hours at room temperature 5 cycles with following detail: 30 minutes at lower category temperature 30 minutes at upper category temperature Recovery time 24 ± 2 hours No visual damage <General purpose series> C/C : ± 15% <High Capacitance series> C/C : ± 15% D.F. meet initial specified value R ins meet initial specified value
16 Product specification 16 Surface Mount Multilayer Ceramic Capacitors TEST TEST METHOD PROCEDURE REQUIREMENTS Damp Heat with U r Load Preconditioning, class 2 only: /-10 C /1 hour, then keep for 24 ± 1 hour at room temp 2. Initial measure: Spec: refer to initial spec C, D, IR 3. Damp heat test: 500 ± 12 hours at 40 ±2 C; 90 to 95% R.H. 1.0 U r applied 4. Recovery: Class 2: 24 ± 2 hours 5. Final measure: C, D, IR P.S. If the capacitance value is less than the minimum value permitted, then after the other measurements have been made the capacitor shall be preconditioned according to IEC and then the requirements shall be met. No visual damage after recovery <General purpose series> C/C : ± 15% D.F. : 16V: 7% 25V: 5% R ins : 500 MΩ or R ins x C r 25s whichever is less <High Capacitance series> C/C : ± 20% D.F. : 2 x initial value max R ins Rins x Cr 5s whichever is less
17 Product specification 17 TEST TEST METHOD PROCEDURE REQUIREMENTS Endurance IEC / Preconditioning, class 2 only: /-10 C /1 hour, then keep for 24 ± 1 hour at room temp 2. Initial measure: Spec: refer to initial spec C, D, IR 3. Endurance test: Temperature: : 85 C Specified stress voltage applied for 1,000 hours: Applied 2.0 x Ur for general product*. Applied 1.5 x Ur for high cap. product*. Applied 1.0 x Ur for high cap. product*. 0201: 100nF/25V, 220nF/10V,/ 1uF, 2.2uF/ 4V, 6.3V 0402: 4.7uF/16V, 10V, 6.3V; 10uF/4V, 6.3V 0603: 10uF/ 10V; 22uF/6.3V, 10V; 47uF/4V 0805: 10uF/ 25V, 50V; 22uF/ 6.3V, 10V, 16V 47uF/ 6.3V, 10V; 100uF/ 4V 1206: 10uF/ 50V; 4. Recovery time: 24 ± 2 hours 5. Final measure: C, D, IR P.S. If the capacitance value is less than the minimum value permitted, then after the other measurements have been made the capacitor shall be preconditioned according to IEC and then the requirements shall be met. * General product: nF nF nF 0805, 1206, uF No visual damage <General purpose series> C/C : ± 15% D.F. : 16V: 7% 25V: 5% R ins : 1,000 MΩ or R ins x C r 50s whichever is less <High Capacitance series> C/C Class 2: : ± 20% D.F. Class 2: : 2 x initial value max R ins Class 2: Rins x Cr 10s whichever is less Voltage Proof * High cap product: 0201 > 10nF 0402 > 100nF 0603 > 470nF 0805, 1206, 1210 > 1uF 4.6 Specified stress voltage applied for 1~5 seconds Ur 100 V: series applied 2.5 Ur 100 V < Ur 200 V series applied (1.5 Ur + 100) 200 V < Ur 500 V series applied (1.3 Ur + 100) Ur > 500 V: 1.3 Ur Ur 1000 V: 1.2 Ur Charge/Discharge current is less than 50 ma No breakdown or flashover
18 Product specification Surface Mount Multilayer Ceramic Capacitors REVISION HISTORY REVISION DATE CHANGE NOTIFICATION DESCRIPTION Version 23 Nov. 15, Dimension updated Version 22 Oct. 3, Dimension and Soldering recommendation updated Version 21 Jan. 28, Tests and requirements updated Version 20 Dec. 04, Size updated Version 19 Apr. 09, Voltage updated Version Jul. 07, Voltage updated Version 17 Mar. 31, Test condition updated Version 16 Nov. 29, Test condition updated Version 15 Sep. 03, Test condition updated Version 14 May 16, Product range updated Version 13 May 02, Product range updated Version 12 Feb 10, Product range updated Version 11 Oct 21, Product range updated Version 10 Jun 21, Product range updated Version 9 Mar 23, Product range updated Version 8 Jan 25, Rated voltage of 0201 extend to 50V Version 7 Jan 05, Product range updated Version 6 Jul 27, Dimension on 0603 and 1206 case size updated Version 5 Apr 21, The statement of "Halogen free" on the cover added - Dimension updated Version 4 Jan 13, Thickness updated Version 3 Aug 17, Dimension updated Version 2 Jun 09, Ordering code updated Version 1 May 15, Product range updated Version 0 Apr 15, New datasheet for general purpose and high capacitance series with RoHS compliant - Replace the "6.3V to 50V" part of pdf files: UP-_X7R_HighCaps_6.3- to-25v_11, UY-_X7R_HighCaps_6.3-to-25V_11 - Combine 0201 from pdf files: UP-NP0X7RY5V_0201_6.3-to-50V_2 and UY-NPOX7RY5V_0201_6.3-to-50V_2 - Define global part number - Description of "Halogen free compliant" added
DATA SHEET SURFACE-MOUNT CERAMIC MULTILAYER CAPACITORS General Purpose & High Capacitance Class 2, X7R
DATA SHEET SURFACE-MOUNT CERAMIC MULTILAYER CAPACITORS General Purpose & High Capacitance Class 2, 6.3 V TO 50 V 100 pf to 22 µf RoHS compliant & Halogen Free Product Specification October 13, 11 V.8 Product
DATA SHEET GENERAL PURPOSE CHIP RESISTORS RC0402 5%, 1% RoHS compliant & Halogen Free
DATA SHEET GENERAL PURPOSE CHIP RESISTORS 5%, 1% RoHS compliant & Halogen Free Product specification Supersedes Date of Mar. 06, 2003 Product specification 2 SCOPE This specification describes series chip
DATA SHEET LOW OHMIC HIGH POWER CHIP RESISTORS RL-High power series 5%, 2%, 1% sizes 0805/1206
DATA SHEET LOW OHMIC HIGH POWER CHIP RESISTORS series 5%, 2%, 1% sizes 005/1206 RoHS compliant Product specification Aug 27, 200 V.2 Product specification 2 SCOPE This specification describes RL005/1206
DATA SHEET HIGH POWER CHIP RESISTORS RC high power series 5%, 1% sizes 0603/0805/1206/2512. RoHS compliant & Halogen free
DATA SHEET HIGH POWER CHIP RESISTORS RC high power series 5%, 1% sizes 0603/005/1206/2512 RoHS compliant & Halogen free Product specification Supersedes Date of Mar. 06, 2003 Product specification 2 SCOPE
DATA SHEET ARRAY CHIP RESISTORS YC/TC 5%, 1% sizes YC:102/104/122/124/162/164/248/324/158/358 TC: 122/124/164
Product specification December 11, 2015 V.2 0 DATA SHEET ARRAY CHIP RESISTORS YC/TC 5%, 1% sizes YC:102/104/2/4/162/164/248/324/158/358 TC: 2/4/164 RoHS compliant Product specification 2 SCOPE This specification
TC50 High Precision Power Thin Film chip resistors (RoHS compliant Halogen Free) Size 1206, 0805, 0603
WF2Q, WF08Q, WF06Q ±%, ±0.5%, ±0.25%, ±0.%, ±0.05% TC50 High Precision Power Thin Film chip resistors (RoHS compliant Halogen Free) Size 206, 0805, 0603 *Contents in this sheet are subject to change without
Surface Mount Multilayer Ceramic Chip Capacitor Solutions for High Voltage Applications
Surface Mount Multilayer Ceramic Chip Capacitor Solutions for High Voltage Applications ELECTRICAL SPECIFICATIONS X7R GENERAL SPECIFICATION Note Electrical characteristics at +25 C unless otherwise specified
AC and Pulse Film Foil Capacitors KP Radial Potted Type
AC and Pulse Film Foil Capacitors KP Radial Potted Type 0.5 L max. W max. Marking H max. FEATURES 5 mm lead pitch, supplied loose in box taped in ammopack or reel Material categorization: for definitions
DATA SHEET LEAD FREE CHIP RESISTORS RC_P series ±0.5%, ±1%, ±5% Sizes 0100/0201/0402/0603/0805/ 1206/1210/1218/2010/2512
DATA SHEET LEAD FREE CHIP RESISTORS RC_P series ±0.5%, ±1%, ±5% Sizes 0100/0201/0402/0603/005/ 1206/1210/121/2010/2512 Product specification August 22, 2014 V.0 Product specification 2 SCOPE This specification
3216 Ceramic Chip Antenna for Bluetooth/WLAN Application
ANTENNA PRODUCTS Mars Liu C.T.Lee Page 1 sheet 190-1 A4 for Bluetooth/WLAN Application Preliminary Product Specification Quick Reference Data Centre Frequency Bandwidth VSWR Polarization Azimuth Beamwidth
Surface Mount Multilayer Ceramic Chip Capacitors for Automotive Applications
Surface Mount Multilayer Ceramic Chip Capacitors for Automotive Applications FEATURES AEC-Q200 qualified with PPAP available Available in 0402 to 1812 body size Three dielectric materials AgPd termination
Axial and Radial Leaded Multilayer Ceramic Capacitors for Automotive Applications Class 1 and Class 2, 50 V DC, 100 V DC and 200 V DC
Axial and Radial Leaded Multilayer Ceramic Capacitors for Automotive Applications Class 1 and Class 2, 5 V DC, 1 V DC and 2 V DC DESIGNING For more than 2 years Vitramon has supported the automotive industry
WW12X, WW08X, WW06X, WW04X ±1%, ±5% Thick Film Low ohm chip resistors
WW12X, WW08X, WW06X, WW04X ±1%, ±5% Thick Film Low ohm chip resistors Size 1206, 0805, 0603, 0402 *Contents in this sheet are subject to change without prior notice. Page 1 of 8 ASC_WWxxX_V12 Nov.- 2011
Power chip resistor size 2512 PRC221 5%; 2% FEATURES Reduced size of final equipment Low assembly costs Higher component and equipment reliability.
FEATURES Reduced size of final equipment Low assembly costs Higher component and equipment reliability. APPLICATIONS Power supplies Printers Computers Battery chargers Automotive Converters CD-ROM. QUICK
Polymer Termination. Mechanical Cracking 2. The reason for polymer termination. What is Polymer Termination? 3
Polymer Termination An alternative termination material specifically designed to absorb greater levels of mechanical stress thereby reducing capacitor failures associated with mechanical cracking Mechanical
AC Line Rated Ceramic Disc Capacitors Class X1, 760 V AC, Class Y1, 500 V AC
AC Line Rated Ceramic Disc Capacitors Class X1, 760 V AC, Class Y1, 500 V AC QUICK REFERENCE DATA DESCRIPTION VALUE Ceramic Class 1 2 Ceramic Dielectric U2J U2J Y5S, Y5U Y5S, Y5U Voltage (V AC ) 500 760
DATA SHEET CHIP RESISTORS RT Series 1%; 0.5%; 0.25%; 0.1%
DATA SHEET CHIP RESISTORS Series 1%; 0.5%; 0.25%; 0.1% Product specification Supersedes Date of Sep. 30, 2003 ynsc004 ynsc015 ynsc002 ynsc007 2 SCOPE This specification describes series chip resistors
Standard Thick Film Chip Resistors
Standard Thick Film Chip Resistors FEATURES Stability R/R = 1 % for 00 h at 70 C 2 mm pitch packaging option for size Pure tin solder contacts on Ni barrier layer provides compatibility with lead (Pb)-free
DC Film Capacitors MKT Radial Potted Type
DC Film Capacitors MKT Radial Potted Type MKT80 FEATURES AEC-Q00 qualified (rev. D) for PCM. mm (for larger available components on request) High temperature capabilities, up to 0 C Capacitance up to 60
DATA SHEET THICK FILM CHIP RESISTORS Introduction
DATA SHEET THICK FILM CHIP RESISTORS Introduction Product Specification Product specification 2 Chip Resistor Surface Mount Data in data sheets is presented - whenever possible -according to a 'format',
WR12, WR08, WR06, WR04 ±1%, ±5% Thick Film General Purpose Chip Resistors Size 1206, 0805, 0603, 0402
WR12, WR08, WR06, WR04 ±1%, ±5% Thick Film General Purpose Chip Resistors Size 1206, 0805, 0603, 0402 *Contents in this sheet are subject to change without prior notice. Page 1 of 10 ASC_WR_V23 APR.- 2015
DC Film Capacitors MKT Radial Potted Type
DC Film Capacitors MKT Radial Potted Type FEATURES 15 mm to 27.5 mm lead pitch. Supplied loose in box and taped on reel Material categorization: for definitions of compliance please see www.vishay.com/doc?99912
High-ohmic/high-voltage resistors
FEATURES High pulse loading capability Small size. APPLICATIONS Where high resistance, high stability and high reliability at high voltage are required High humidity environment White goods Power supplies.
Chip Monolithic Ceramic Capacitors
This PDF catalog is downloaded from the website of Murata Manufacturing co., ltd. Therefore, it s specifications are subject to change or our products in it may be discontinued without advance notice.
High-ohmic/high-voltage resistors
FEATURES These resistors meet the safety requirements of: UL1676 (range 510 kω to 11 MΩ) EN60065 BS60065 (U.K.) NFC 92-130 (France) VDE 0860 (Germany) High pulse loading capability Small size. APPLICATIONS
Types MC and MCN Multilayer RF Capacitors
High-Frequency, High-Power, High-Voltage Chips with Nonmagnetic Option Rugged flexibility and compatibility with FR4 boards make Type MC and MCN capacitors ideal for use where other multilayer caps aren
handbook, 2 columns handbook, halfpage 085 CS
FEATURES Polarized aluminium electrolytic capacitors, non-solid, self healing Extended voltage and capacitance range SMD-version, fully moulded, insulated Flexible terminals, reflow and wave solderable
Precision Surface Mount Resistors Wirewound or Metal Film Technologies
Precision Surface Mount Resists irewound Metal Film Technologies FEATURES Accding to CECC 40402-801 (wirewound) ide range of ohmic values (0.04 to 1 M) Low temperature coefficient (± 25 ppm/ C available)
Pulse Withstanding Thick Film Chip Resistor-SMDP Series. official distributor of
Product: Pulse Withstanding Thick Film Chip Resistor-SMDP Series Size: /// official distributor of Pulse Withstanding Thick Film Chip Resistor-SMDP Series 1. Scope -This specification applies to ~ sizes
Pulse Proof, High Power Thick Film Chip Resistors
Pulse Proof, High Power Thick Film Chip Resistors STANDARD ELTRICAL SPIFICATIONS MODEL CASE SIZE INCH CASE SIZE METRIC POWER RATING P 70 W LIMITING ELEMENT VOLTAGE U max. AC/DC -HP e3 FTURES Excellent
Pulse Proof Thick Film Chip Resistors
Pulse Proof Thick Film Chip Resistors FEATURES High pulse performance, up to kw Stability R/R 1 % for h at 70 C AEC-Q200 qualified Material categorization: for definitions of compliance please see www.vishay.com/doc?99912
Interference Suppression Film Capacitors MKP Radial Potted Type
Interference Suppression Film Capacitors MKP Radial Potted Type FEATURES 7.5 mm to 27.5 mm lead pitch Supplied loose in box, taped on reel Material categorization: For definitions of compliance please
Precision Leaded Resistors
FEATURES Approved according to CECC 40101-806 Advanced thin film technology Low TC: ± 15 to Precision tolerance of value: ± 0.1 % and ± 0.25 % Superior overall : class 0.05 Wide precision range: 10 Ω to
SPECIFICATION FOR APPROVAL. Approved by
C O N F I D E N T I A L D O C U M E N T SPECIFICATION FOR APPROVAL CONRAD Description : Royalohm Part no.: 0402WGxxxxxTCE (RMC 1/16W (0402) +/- 1%, 5% & Jumper) 0603SAxxxxxT5E (RMC 1/10W-S (0603) +/- 1%,
Automotive and Anti-Sulfuration Chip Resistor 0402
The resistors are constructed in a high grade ceramic body (aluminium oxide). Internal metal electrodes are added at each end and connected by a resistive paste that is applied to the top surface of the
ATC 600S Series Ultra-Low ESR, High Q, NPO RF & Microwave Capacitors
AC 600S Series Ultra-Low ESR, High Q, NPO RF & Microwave Capacitors Features: Lowest ESR in Class Highest Working Voltage in class 250V Standard EIA Size: 0603 Laser Marking (Optional) RoHS Compliant High
P O W E R C A P A C I T O R A S S E M B L I E S
AMERICAN TECHNICAL CERAMICS P O W E R C A P A C I T O R A S S E M B L I E S ISO 9001 REGISTERED COMPANY Overview About ATC Power Assemblies ATC standard & custom Power Assemblies are fabricated from PARALLEL
Product Specification
Product Specification Model No.: DC-240-L01-00-TR Description: H=3.00mm Horizontal SMD DC Power Jacks Pin Shaft Diameter: 0.65mm Packing Method: Tape & Reel (600pcs./R) 1. General 1a. Scope The jacks should
Metallized Polypropylene Film Capacitors DC-Link Capacitor
Metallized Polypropylene Film Capacitors DC-Link Capacitor FEATURES Slim line, low building height Very long useful life time: Up to 100 000 h at U NDC and 70 C High ripple current capability, low ESR,
High Ohmic/High Voltage Metal Glaze Leaded Resistors
High Ohmic/High Voltage Metal Glaze Leaded Resistors FEATURES Technology: Metal glaze A metal glazed film is deposited on a high grade ceramic body. After a helical groove has been cut in the resistive
DC Film Capacitors MKT Radial Potted Type
DC Film Capacitors MKT Radial Potted Type FEATURES 5.08 mm lead pitch Supplied loose in box, taped on ammopack or reel AEC-Q200 qualified (rev. D) Material categorization: for definitions of compliance
WCAP-CSGP Ceramic Capacitors
A Dimensions: [mm] B Recommended land pattern: [mm] D1 Electrical Properties: Properties Test conditions Value Unit Tol. Capacitance 1±0.2 Vrms, 1 khz ±10% C 15000 pf ± 10% Rated voltage Dissipation factor
Type RP73 Series. SMD High Power Precision Resistors. Key Features. Applications. Characteristics - Electrical - RP73 Series - Standard
Key Features n High precision - tolerances down to 0.05% n Low TCR - down to 5ppm/ C n Stable high frequency performance n Operating temperature -55 C to +155 C n Increased power rating - up to 1.0W n
High Ohmic (up to 68 MΩ)/ High Voltage (up to 10 kv) Resistors
High Ohmic (up to 68 MΩ)/ A metal glazed film is deposited on a high grade ceramic body. After a helical groove has been cut in the resistive layer, tinned electrolytic copper wires are welded to the end-caps.
High Ohmic/High Voltage Metal Glaze Leaded Resistors
VR37 High Ohmic/High Voltage FEATURES A metal glazed film is deposited on a high grade ceramic body. After a helical groove has been cut in the resistive layer, tinned electrolytic copper wires are welded
Aluminum Electrolytic Capacitors Radial Miniature, Low Impedance, High Vibration Capability
Aluminum Electrolytic Capacitors Radial Miniature, Low Impedance, High Vibration Capability 048 RML 48 RUS lower longer life 36 RVI miniaturize 50 RMI high vibration FEATURES Very long useful life: 7000
SMD Aluminum Solid Capacitors with Conductive Polymer
SMD Aluminum Solid Capacitors with Conductive Polymer FEATURES New OS-CON series provides improved characteristics with up to 25 C temperature capability and 35 V maximum voltage rating in a SMD package
4N25 Phototransistor Optocoupler General Purpose Type
4N Phototransistor Optocoupler General Purpose Type Data Sheet Lead (Pb) Free RoHS 6 fully compliant RoHS 6 fully compliant options available; -xxxe denotes a lead-free product Description The 4N is an
Aluminum Capacitors Solid Axial
SAL-A End of Life. Last Available Purchase Date is -December- Radial higher CV/volume Fig. QUICK REFERENCE DATA DESCRIPTION VALUE Maximum case size (Ø D x L in mm) 6.7 x. to.9 x. Rated capacitance range
November 2013. 3-terminal Filters. For signal line. MEM series. * Dimensions Code JIS[EIA]
![November 2013. 3-terminal Filters. For signal line. MEM series. * Dimensions Code JIS[EIA]](/thumbs/29/13476958.jpg "November 2013. 3-terminal Filters. For signal line. MEM series. * Dimensions Code JIS[EIA]")
E M C C o m p o n e n t s November 0 -terminal Filters For signal line MEM series MEM0S MEM0SC MEM0V MEM0F MEM608P 0[0805 inch]* 0[0805 inch] 0[0805 inch] 0[0805 inch] 608[060 inch] * Dimensions Code JIS[EIA]
DC Film Capacitor MKT Radial Potted Type
MKT 370 l w FEATURES Available taped and loose in box RoHS compliant h ENCAPSULATION Flame retardant plastic case and epoxy resin (UL-class 94 V-0) P ± 0.3 Dimensions in mm l t Ø d t CLIMATIC TESTING CLASS
50 W Power Resistor, Thick Film Technology, TO-220
50 W Power Resistor, Thick Film Technology, TO-220 FEATURES 50 W at 25 C heatsink mounted Adjusted by sand trimming Leaded or surface mount versions High power to size ratio Non inductive element Material
Gas Discharge Tube (GDT) Products CG5 and SL0902A Series. CG5 and SL0902A Series
Description Agency Approvals AGENCY AGENCY FILE NUMBER E128662 2 Electrode GDT Graphical Symbol Littelfuse Broadband Optimized SL0902A Series offers high surge ratings in a miniature package. Special design
Aluminum Electrolytic Capacitors Axial Miniature, Long-Life
Aluminum Electrolytic Capacitors Axial Miniature, Long-Life 38 AML 0 ASM smaller dimensions Fig. QUICK REFERENCE DATA DESCRIPTION Nominal case sizes (Ø D x L in mm) 6.3 x.7 to 0 x 5 VALUE 0 x 30 to x 38
If there is any doubt about the results, measurement shall be made within the following limits : Ambient temperature 25±3 Relative humidity 40%~70%
APPROVED : Tin SHEET : 2 of 10 Standard atmospheric conditions Unless otherwise specified, the standard range of atmospheric conditions for making measurement and tests are as follow : Ambient temperature
Thermal Resistance, Power Dissipation and Current Rating for Ceramic and Porcelain Multilayer Capacitors
Thermal Resistance, Power Dissipation and Current Rating for Ceramic and Porcelain Multilayer Capacitors by F. M. Schaubauer and R. Blumkin American Technical Ceramics Reprinted from RF Design Magazine,
Insulated Precision Wirewound Resistors Axial Leads
Insulated Precision Wirewound Resistors Axial Leads In wirewound precision resistors, the series holds a leading position in professional applications whenever an excellent stability of the ohmic value
High Ohmic/High Voltage Metal Film Leaded Resistors
, High Ohmic/High Voltage FEATURES Metal film technology High pulse loading (up to 10 kv) capability Small size (0207/0411) Compatible with lead (Pb)-free and lead containing soldering processes Compliant
SMD High Power Precision Resistors
Key Features High precision - TCR 5ppm/ C and 10ppm/ C Tolerance down to 0.01% Thin film (nichrome) Choice of packages Stable high frequency performance Temperature range -55 C to +155 C Applications Communications
High Ohmic/High Voltage Metal Glaze Leaded Resistors
High Ohmic/High Voltage FEATURES A metal glazed film is deposited on a high grade ceramic body. After a helical groove has been cut in the resistive layer, tinned electrolytic copper wires are welded to
SURFACE MOUNT CERMET TRIMMERS (SINGLE TURN) Rotor. Wiper. Cover. Pin S T - 2 T A 1 0 0 Ω ( 1 0 1 )
SURFACE MOUNT CERMET TRIMMERS (SINGLE TURN) COPAL ELECTRONICS RoHS compliant INTERNAL STRUCTURE 8 4 7! 5! 9 FEATURES RoHS compliant Compact and low-profile mm single turn type Sealed construction 4 5 7
SPECIFICATION MARITEX 06/30/ 08 CHIP INDUCTORS (ROHS)
FL201209SERIESLFR FL201209SERIESLFR Scope: This specification applies to multilayer ferrite & ceramicchip inductors. 1. Part Number Key & Mechanical Drawing FL XX XX XX XXX X A B C Tolerance Inductance
February 2015. Chip Beads. For power line. HF-ACC Series. HFxxACC3216. * Dimensions Code JIS[EIA]
![February 2015. Chip Beads. For power line. HF-ACC Series. HFxxACC3216. * Dimensions Code JIS[EIA]](/thumbs/19/266676.jpg "February 2015. Chip Beads. For power line. HF-ACC Series. HFxxACC3216. * Dimensions Code JIS[EIA]")
E M C C o m p o n e n t s February 2015 Chip Beads For power line HF-ACC Series HFxxACC3216 [1206 inch]* * Dimensions Code JIS[EIA] (2/8) REMINDERS FOR USING THESE PRODUCTS Before using these products,
ST-2 SURFACE MOUNT CERMET TRIMMERS (SINGLE TURN) FEATURES PART NUMBER DESIGNATION S T - 2 T A 1 0 0 Ω ( 1 0 1 ) RoHS compliant
SURFACE MOUNT CERMET TRIMMERS (SINGLE TURN) ST- RoHS compliant INTERNAL STRUCTURE 8 4 7 FEATURES RoHS compliant Compact and low-profile mm single turn type Sealed construction 4 5 7 8 9!! 5 Part name Housing
AC Line Rated Ceramic Disc Capacitors Class X1, 760 V AC / Class Y1, 500 V AC
4L Series AC Line Rated Ceramic Disc Capacitors Class X, 76 V AC / Class Y, 5 V AC FEATURES Complies with IEC 6384-4, 4 th edition High reliability Radial leads High capacitance up to nf Singlelayer AC
Harvatek Surface Mount LED Data Sheet. HT-F195 Series
Harvatek Surface Mount LED Data Sheet Official Product Product: Data Sheet No. Tentative Product **************** Jul. 15, 2005 Version of 1.4 Page 1/20 DISCLAIMER...3 PRODUCT SPECIFICATIONS...4 ATTENTION:
High Ohmic/High Voltage Metal Glaze Leaded Resistors
High Ohmic/High Voltage Metal Glaze Leaded Resistors FEATURES Technology: Metal glaze A metal glazed film is deposited on a high grade ceramic body. After a helical groove has been cut in the resistive
Y.LIN ELECTRONICS CO.,LTD.
Features Current transfer ratio (CTR 50~600% at I F =5mA, V CE =5V) High isolation voltage between input and output (Viso=5000 V rms ) Creepage distance >7.62 mm Operating temperature up to +110 C Compact
Metal-Oxide Varistors (MOVs) Surface Mount Multilayer Varistors (MLVs) > MLN Series. MLN SurgeArray TM Suppressor. Description
MLN SurgeArray TM Suppressor RoHS Description The MLN SurgeArray Suppressor is designed to help protect components from transient voltages that exist at the circuit board level. This device provides four
INTEGRATED CIRCUITS. For a complete data sheet, please also download:
INTEGRATED CIRCUITS DATA SHEET For a complete data sheet, please also download: The IC06 74HC/HCT/HCU/HCMOS Logic Family Specifications The IC06 74HC/HCT/HCU/HCMOS Logic Package Information The IC06 74HC/HCT/HCU/HCMOS
DISCRETE SEMICONDUCTORS DATA SHEET. BLF244 VHF power MOS transistor
DISCRETE SEMICONDUCTORS DATA SHEET September 1992 FEATURES High power gain Low noise figure Easy power control Good thermal stability Withstands full load mismatch Gold metallization ensures excellent
Power Resistor Thick Film Technology
Power Resistor Thick Film Technology LTO series are the extension of RTO types. We used the direct ceramic mounting design (no metal tab) of our RCH power resistors applied to semiconductor packages. FEATURES
MADP-000504-10720T. Non Magnetic MELF PIN Diode
MADP-54-172T Features High Power Handling Low Loss / Low Distortion Leadless Low Inductance MELF Package Non-Magnetic Surface Mountable RoHS Compliant MSL 1 Package Style 172 Dot Denotes Cathode Description
High Ohmic / High Voltage Metal Glaze Leaded Resistors
High Ohmic / High Voltage Metal Glaze Leaded Resistors A metal glazed film is deposited on a high grade ceramic body. After a helical groove has been cut in the resistive layer, tinned electrolytic copper
Kit 27. 1W TDA7052 POWER AMPLIFIER
Kit 27. 1W TDA7052 POWER AMPLIFIER This is a 1 watt mono amplifier Kit module using the TDA7052 from Philips. (Note, no suffix.) It is designed to be used as a building block in other projects where a
High Precision TCXO / VCTCXO Oscillators
Available at Digi-Key** www.digikey.com High Precision TCXO / VCTCXO Oscillators 2111 Comprehensive Drive Phone: 60-81- 722 Fax: 60-81- 00 US Headquarters: 60-81-722 European Headquarters: +-61-72221 Description:
Ceramic Trimmer Capacitors
!Note T3E8.pdf 2.9.2 Ceramic Trimmer Capacitors TZB4 Series.±. Depth.5.4±. dia. Features. Miniature rectangular shape : 4.(W)x4.5(L)x3.(H)mm. 2. Color coded case facilitates identification of capacitance
SPEC NO: DSAJ8637 REV NO: V.6B DATE: JUL/01/2016 PAGE: 1 OF 5 APPROVED:
1.0X0.5mm SMD CHIP LED LAMP ATTENTION OBSERVE PRECAUTIONS FOR HANDLING ELECTROSTATIC DISCHARGE SENSITIVE DEVICES Part Number: APHHS1005ZGC Green Features 1.0mmX0.5mm SMD LED, 0.5mm thickness. Low power
Spezifikation für Freigabe / specification for release
Artikelnummer / part number : 82550350 Datum / Date : 31.07.06 description : 0805 SMD VARISTOR Lead Free SMD size: 0805 ROHS Compliant A Mechanische Abmessungen / dimensions : SIZE SIZE W L T a 0402 0.5
Professional Thin Film MELF Resistors
,, - Professional Professional Thin Film MELF Resistors, and professional thin film MELF resistors are the perfect choice for most fields of rn professional electronics where reliability and stability
Ultra Precision Metal Film Leaded Resistors
Ultra Precision Metal Film Leaded Resistors FEATURES Exceptional low TCR: ± 2 ppm/k to ± 10 ppm/k Super tight tolerance: ± 0.01 % to ± 0.25 % Exceptional overall stability: class 0.02 Wide resistance range:
SELECTION GUIDE. Nominal Input
www.murata-ps.com NKE Series FEATURES RoHS Compliant Sub-Miniature SIP & DIP Styles 3kVDC Isolation UL Recognised Wide Temperature performance at full 1 Watt load, 40 C to 85 C Increased Power Density
Interference Suppression Film Capacitors MKP Radial Potted Type
MKP338 6 Y2 Vishay BCcomponents Interference Suppression Film Capacitors 168x12(halfpage) l P Dimensions in mm Note (1) F - F < 0.3 mm F = 7.5 mm + 0.6 mm/- 0.1 mm APPLICATIONS For standard line bypass
Features. Applications. Truth Table. Close
ASSR-8, ASSR-9 and ASSR-8 Form A, Solid State Relay (Photo MOSFET) (0V/0.A/0Ω) Data Sheet Description The ASSR-XX Series consists of an AlGaAs infrared light-emitting diode (LED) input stage optically
INTEGRATED CIRCUITS DATA SHEET. TDA7052 1 W BTL mono audio amplifier. Product specification File under Integrated Circuits, IC01
INTEGRATED CIRCUITS DATA SHEET TDA7052 1 W BTL mono audio amplifier File under Integrated Circuits, IC01 July 1994 GENERAL DESCRIPTION The TDA7052 is a mono output amplifier in a 8-lead dual-in-line (DIL)
R D E W F. 1 Semiconductive Ceramics 2 Internal electrode 4 Terminal electrode Intermediate electrode. 5 External electrode
Multilayer Varistor for ESD pulse [DC lines/high speed signal lines] Series: EZJZ, EZJP Excellent ESD suppression due to original advanced material technology Having large electrostatic resistance meeting
ATC 800 B Series NPO Ceramic, High RF Power Ultra-Low ESR Multilayer Capacitors
800 Series NPO Ceramic, High RF Power Ultra-ow ESR Multilayer Capacitors Case Size (" x ") Rugged, reliable NPO dielectric Case optimized for highest self resonant frequency s 800 Series offers superb
Aluminum Electrolytic Capacitors Power Eurodin Printed Wiring
Aluminum Electrolytic Capacitors Power Eurodin Printed Wiring 00/0 PEDPW Fig. QUICK REFERENCE DATA DESCRIPTION VALUE 00 0 Nominal case size (Ø D x L in mm) x 0 to 0 x 00 Rated capacitance range 0 μf to
Power Resistor for Mounting onto a Heatsink Thick Film Technology
DIMENSIONS in millimeters Power Resistor for Mounting onto a Heatsink Thick Film Technology FEATURES 800 W at 85 C bottom case temperature Wide resistance range: 0.3 to 900 k E24 series Non inductive Easy
SuperTan Extended (STE) Capacitors, Wet Tantalum Capacitors with Hermetic Seal
SuperTan Extended () Capacitors, Wet Tantalum Capacitors with Hermetic Seal FEATURES SuperTan Extended () represents a major breakthrough in wet tantalum capacitor Available technology. Its unique cathode
Aluminum Electrolytic Capacitors Power Economic Printed Wiring
Aluminum Electrolytic Capacitors Power Economic Printed Wiring 0/0 PECPW 00/0 PEDPW Fig. QUICK REFERENCE DATA DESCRIPTION high ripple current 0/0 PECPW long life 0 C Nominal case size (Ø D x L in mm) Rated
Advanced Monolithic Systems
Advanced Monolithic Systems FEATURES Three Terminal Adjustable or Fixed oltages* 1.5, 1.8, 2.5, 2.85, 3.3 and 5. Output Current of 1A Operates Down to 1 Dropout Line Regulation:.2% Max. Load Regulation:.4%
High Power Thick Film Chip Resistor 2512
Specifications: Type : MCHP12 Power Rating at 70 C : 2W Working Voltage : 250V Max. Overload Voltage : 500V Max. Dielectric Withstanding Voltage : 500V Temperature Range : -55 C to +155 C Ambient Temperature
How To Control A Power Supply On A Powerline With A.F.F Amplifier
INTEGRATED CIRCUITS DATA SHEET Sound I.F. amplifier/demodulator for TV File under Integrated Circuits, IC02 March 1986 GENERAL DESCRIPTION The is an i.f. amplifier with a symmetrical FM demodulator and
Optocoupler, Phototransistor Output, with Base Connection, 300 V BV CEO
SFH64 Optocoupler, Phototransistor Output, with Base Connection, 3 V BV CEO i1794-3 DESCRIPTION The SFH64 is an optocoupler with very high BV CER, a minimum of 3 V. It is intended for telecommunications
General information. Please refer to our Internet address (http://www.kemet.com) for updated information on KEMET products, services and news.
DC Film Capacitors Please refer to our Internet address (http://www.kemet.com) for updated information on KEMET products, services and news. Contents Pitch Rated Voltage Capacitance Page mm Vdc range range
1 Form A Solid State Relay
Form A Solid State Relay VOAT, VOAABTR FEATURES 9 S S DC S' 3 S' High speed SSR - t on /t off < 8 μs Maximum R ON. Isolation test voltage 3 V RMS Load voltage V Load current A DC configuration DIP- package
Contents. 12. Lot Number 10. 13. Reel Packing Structure 11. 14. Precaution for Use 13. 15. Hazard Substance Analysis 14. 16. Revision History 18
Rev : 00 ISSUE NO : DATE OF ISSUE : 2009. 04. 10 S P E C I F I CATION MODEL : SLHNNWW629T1S0U0S0 [Rank : (S0), (U0), (S0)] HIGH POWER LED - SUNNIX6 CUSTOMER : CUSTOMER CHECKED CHECKED APPROVED SAMSUNG
IN1M101 Precision AC Brown-out Supervisor IC
Precision AC Brown-out Supervisor IC Rev.1.1 03 30 2011 Specification General Description provides a precise comparator to detect the rectified AC voltage, which could protect the SPS when AC voltage is
Solid Tantalum Surface Mount Capacitors TANTAMOUNT, Molded Case, Low ESR
Solid Tantalum Surface Mount Capacitors TANTAMOUNT, Molded Case, Low ESR Effective September 2005, new capacitor ratings will not be added to the series. All new ratings are available in the TR3 series.