FT4000P. Integrated Fuel Pump / Fuel Management System. (DATATAG - Shown Life Size). Datatag is designed fit on a standard Keyring

Transcription

1 FT4000P Integrated Fuel Pump / Fuel Management System The FT4000P is a simple yet sophisticated combination fuel management system / fuel pump, designed to provide complete control for commercial transport organisations dispensing fuel. The FT4000P comprises hardware and software, the hardware is a highly specified Fuel Access Control Terminal (FACT) and a high accuracy commercial fuel pump. Pacif /Ga FM is our reporting and control software and is a Microsoft windows based package which can run on any windows 32 bit platform. The Pacif /Ga FT4000P uses Datatag as the access method for authorisation to use the fuelling facility. FT4000P - SPECIFICATION The FT4000P is specified as a combination fuel dispenser / fuel management system. The FT4000P can control up to 4 fuel pumps simultaneously (1 internal and 3 external). The FT4000P system incorporates a highly visible ¼ VGA back lit graphics display which displays clear concise messages also a robust heavy duty telephone style keypad which enables odometer readings, driver ID's, fleet numbers etc. to be entered at the point of fuelling, the keypad has alpha numeric capability, used the same way you would use text messaging on a mobile phone or if preferred a full QWERTY style alpha numeric keypad can be specified. To complete the user interface we use our extremely reliable datatag reader. The FT4000P incorporates vehicle / driver messaging. A message can be programmed at the Pacif /Ga FM software and sent to the FACT. The next time the relevant datatag is used at the FACT a message will be displayed. The FT4000P system has the capability to provide unlimited storage capacity for look up tables, fleet lists and transaction storage the system offers a minimum primary memory capacity of 2,000 transactions between downloads to the PC, these are stored in non-volatile memory that does not require a battery back-up, which, means even in the event of a mains power fail the system will retain all data. The primary memory can be upgraded to store larger numbers of transactions if required. (DATATAG - Shown Life Size). Datatag is designed fit on a standard Keyring Datatags are Robust, Reliable, Easy to Use and are Guaranteed for the life of the system ACCESS METHOD The FT4000P uses a Datatag as the access method. The Datatag we manufacture is a read/write tag, incorporating high security authentication using a cryptographic algorithm and a guaranteed 100,000 read/write cycles minimum. Data retention is 10 years minimum. The advantages of the Datatag are that there are no moving parts maintenance is therefore low, saving costs in the long term on the upkeep of the system. Datatags supplied are guaranteed for the life of the system. The datatag is a read/write device and can be programmed with many operating parameters. The datatag can be programmed either remotely at the FACT or at the PC.

2 FT4000P REPORTING 1590mm 335mm 400mm mm For reporting purposes data is downloaded from the FACT via a communication link to an existing central PC running windows based Pacif /Ga FM software that allows reports to be viewed and / or printed from an existing PC / Printer set-up. The software can be installed and viewed on a single or multiple PC's. The FACT captures all fuelling transactions that take place, the Pacif /Ga FM PC software will download and process the fuelling transactions and put them into a readable report format. The main tasks of Pacif /Ga FM PC software are:- Communications to the fuelling terminal Programming Datatags Maintaining tables ( Driver\Fueller\Lockout ) Running Reports Stock Control Backing up data periodically Although Pacif /Ga FM incorporates some standard report formats for ease of use, the software incorporates a reports generator which gives you the ability to create and customise your own reports if required. 280mm 455mm Base Fixing Locations 455mm Communications The FT4000P can support a number or communication methods. Direct Wire - RS485, RS GSM Modem - Serial Modem - Radio Modem - Network Interface allowing the FT4000P to form part of a LAN / WAN. Pacif /Ga have improved on the standard for data - download, the traditional method of dealing with a fuelling transaction once it has been down-loaded to a PC has been to delete it from the FACT. The FT4000P identifies all transactions as having been downloaded and stores them at the FACT, enabling fuelling transactions to be downloaded again in the event of a PC failure. FT4000P - Integrated Pump / Fuel Management System - Pump Specification The pumping unit is a 230 Volt Single phase 70 Litre Per Minute fuel pump. A three metre hard wall hose and an auto cut off nozzle are supplied as standard; we can supply a longer hose if required. The unit uses a four piston displacement meter to ensure overall accuracy of fuel dispensed. The meter is accurate to +/- 0.5% which is achievable over all dispensing speeds. Pumping Unit: Direct Drive - Rotary Vane Motor: 230v Single Phase rated at 6 amps. Meter: 4 Piston Displacement Meter accurate to +/ % Cabinet: Stainless Steel with lockable front door. Display: Electronic LCD Graphics Display with Backlight. Shows up to 9,999.9 litres Period Totaliser: Shows up to 9,999,999 Litres. Lifetime Totaliser: Shows up to 9,999,999 Litres. Pump Speed: Standard 70 Litres Per Minute. (Available in 50 lpm or 90lpm Option) Standard Equipment: Husky Auto - Cut Off Nozzle. 3 metre Steel Braided Hose. Construction The FT4000P Cabinet is manufactured entirely from stainless steel. The unit is sturdy, robust and designed to operate in harsh environments. User Friendly, Reliable, Cost Effective Fuel Management Systems

3 FT1000 Integrated Fuel Pump / Fuel Management System The FT1000 is an integrated fuel pump / fuel management system, designed to provide complete control of both dispensing and management of fuel for smaller commercial transport organisations. The FT1000P comprises hardware and optional software, the hardware is a highly specified Fuel Access Control Terminal (FACT) designed to be installed at the fuelling location. Pacif / Ga XL is a simple reporting and control software package which is Microsoft windows based and can run on any windows 32 bit platform. The Pacif / GaFT1000 uses Datatag as the access method for authorisation to use the fuelling facility. FT Specification The FT1000 is specified as an integrated fuel pump / fuel management system only. The FT1000 system incorporates a Graphics display which displays clear concise messages in real English, a robust heavy duty telephone style keypad can be utilised to enter mileage readings if required. The FT1000 also uses our reliable datatag reader for vehicle identification. ACCESS METHOD The FT1000 uses a Datatag as the access method. The Datatag we manufacture is a read/write tag, incorporating high security authentication using a cryptographic algorithm and a guaranteed 100,000 read/write cycles minimum. Data retention is 10 years minimum. The advantages of the Datatag are that there are no moving parts maintenance is therefore low, saving costs in the long term on the upkeep of the system. Datatags supplied are guaranteed for the life of the system. The datatag is programmed remotely. (DATATAG - Shown Life Size). Datatag is designed fit on a standard Keyring Datatags are Robust, Reliable, Easy to Use and are Guaranteed for the life of the system

4 Plinth Mounted Option REPORTING 240mm 352mm Reporting can take place locally and can be viewed on the display at the FACT or data can be downloaded from the FACT via a USB memory stick (USB Flash Drive) to a PC running Fueltek XL. Communications FT1000 Data is downloaded via a USB memory stick ( USB Flash Drive ) to a PC 1480mm 810mm 376mm running Fueltek XL if PC based reporting is a specified option. Construction The FT1000 ( FACT ) is manufactured entirely from stainless steel. The unit is sturdy, robust and designed to operate in harsh environments. Base Fixing Locations 460mm 460mm User Friendly, Reliable, Cost Effective Fuel Management Systems

5 FT2000AP Integrated Fuel Pump / Fuel Management System The FT2000AP is a simple yet sophisticated fuel management system, designed to provide complete control for commercial transport organisations dispensing fuel. The FT2000AP comprises hardware and software, the hardware is a highly specified Fuel Access Control Terminal ( FACT) and a good quality/ high accuracy commercial fuel pump. Pacif / Ga FM is our reporting and control software and is a Microsoft windows based package which can run on any windows 32 bit platform. The Pacif / Ga FT2000AP uses Datatag as the access method for authorisation to use the fuelling facility. FT2000AP - Specification The FT2000AP is specified as a combination fuel dispenser/ fuel management system. The FT2000AP is a single pump controller (1 internal pump). The FT2000AP system incorporates a Graphics display which displays clear concise messages in real English, a robust heavy duty telephone style keypad which enables odometer readings, driver ID's, fleet numbers etc. to be entered at the point of fuelling and our reliable datatag reader. The keypad has alpha numeric capability, used the same way you would use text messaging on a mobile phone. The FT2000AP incorporates vehicle / driver messaging. A message can be programmed at the Pacif / Ga FM software and sent to the FACT. The next time the relevant datatag is used at the FACT a message will be displayed. The System has a memory capacity of 2,000 transactions between downloads to the PC, these are stored in non-volatile memory that does not require a battery back-up, which, means even in the event of a mains power fail the system will retain all data. ACCESS METHOD The FT2000AP uses a Datatag as the access method. The Datatag we manufacture is a read/write tag, incorporating high security authentication using a cryptographic algorithm and a guaranteed (DATATAG - Shown Life Size). Datatag is designed fit on a standard Keyring Datatags are Robust, Reliable, Easy to Use and are Guaranteed for the life of the system 100,000 read/write cycles minimum. Data retention is 10 years minimum. The advantages of the Datatag are that there are no moving parts maintenance is therefore low, saving costs in the long term on the upkeep of the system. Datatags supplied are guaranteed for the life of the system. The datatag is a read/write device and can be programmed with many operating parameters. The datatag can be programmed either remotely at the FACT or at the PC.

6 REPORTING 1400mm 510mm 455mm FT2000AP 1130mm For reporting purposes data is downloaded from the FACT via a communication link to an existing central PC running windows based Pacific Fuel FM software that allows reports to be viewed and / or printed from an existing PC / Printer set-up. The software can be installed and viewed on a single or multiple PC's. The FACT captures all fuelling transactions that take place, the Pacif / Ga FM PC software will download and process the fuelling transactions and put them into a readable report format. The main tasks of Pacif / Ga FM PC software are :- Communications to the fuelling terminal Programming Datatags Maintaining tables ( Driver\Fueller\Lockout ) Running Reports Stock Control Backing up data periodically Although Pacif / Ga FM incorporates some standard report formats for ease of use, the software incorporates a reports generator which gives you the ability to create and customise your own reports if required. 450mm 525mm Communications Base Fixing Locations The FT2000AP can support a number or communication methods. Direct Wire - RS485, RS GSM Modem - Serial Modem - Radio Modem - Network Interface allowing the FT2000AP to form part of a LAN / WAN. 495mm Pacif / Ga have improved on the standard for data - download, the traditional method of dealing with a fuelling transaction once it has been down-loaded to a PC has been to delete it from the FACT. The FT2000AP identifies all transactions as having been downloaded and stores them at the FACT, enabling fuelling transactions to be downloaded again in the event of a PC failure. FT2000AP - Integrated Pump / Fuel Management System - Pump Specification The pumping unit is a 230 Volt Single phase 70 Litre Per Minute fuel pump. A three metre hard wall hose and an auto cut off nozzle are supplied as standard, we can supply a longer hose if required. The unit uses a four piston displacement meter to ensure overall accuracy of fuel dispensed. The meter is accurate to +/- 0.5% which is achievable over all dispensing speeds. The FT2000AP incorporates an air separation unit. Pumping Unit: Belt Driven with Air Separation Motor: 230v Single Phase rated at 10 amp. Meter: 4 Piston Displacement Meter accurate to +/ % Cabinet: Stainless Steel with lockable front door. Display: Electronic LCD Graphics Display with Backlight. Shows up to 9,999.9 litres Period Totaliser: Shows up to 9,999,999 Litres. Lifetime Totaliser: Shows up to 9,999,999 Litres. Pump Speed: Standard 70 Litres Per Minute. ( available in 50 lpm or 90lpm Option) Standard Equipment: Husky Auto - Cut Off Nozzle. 3 metre Steel Braided Hose. Construction The FT2000AP is manufactured entirely from stainless steel. The unit is sturdy, robust and designed to operate in harsh environments. User Friendly, Reliable, Cost Effective Fuel Management Systems

7 FT4000AP Integrated Fuel Pump / Fuel Management System The FT4000AP is a simple yet sophisticated combination fuel management system / fuel pump, designed to provide complete control for commercial transport organisations dispensing fuel to authorised vehicles on -site. The FT4000AP comprises hardware and software, the hardware is a highly specified Fuel Access Control Terminal ( FACT) and a high accuracy commercial fuel pump. Pacif /Ga FM is our reporting and control software and is a Microsoft windows based package which can run on any windows 32 bit platform. The Pacif /Ga FT4000AP uses Datatag as the access method for authorisation to use the fuelling facility. FT4000AP - SPECIFICATION The FT4000AP is specified as a combination fuel dispenser / fuel management system. The FT4000AP can control up to 4 fuel pumps simultaneously ( 1 internal and 3 external). The FT4000AP system incorporates a highly visible ¼ VGA back lit graphics display which displays clear concise messages, a robust heavy duty telephone style keypad which enables odometer readings, driver ID's, fleet numbers etc. to be entered at the point of fuelling, the keypad has alpha numeric capability, used the same way you would use text messaging on a mobile phone, if preffered a full QWERTY style alpha numeric keypad can be specified, which allows alpha numeric entries to be made very easily. To complete the user interface we use our extremely reliable datatag reader. The FT4000AP incorporates vehicle / driver messaging. A message can be programmed at the Pacif /Ga FM software and sent to the FACT. The next time the relevant datatag is used at the FACT a message will be displayed. The FT4000AP system has the capability to provide unlimited storage capacity for look up tables, fleet lists and transaction storage, the system offers a minimum primary memory capacity of 2,000 transactions between downloads to the PC, these are stored in non-volatile memory that does not require a battery back-up, which, means even in the event of a mains power fail the system will retain all data. The primary memory can be upgraded to store larger numbers of transactions if required. (DATATAG - Shown Life Size). Datatag is designed fit on a standard Keyring Datatags are Robust, Reliable, Easy to Use and are Guaranteed for the life of the system ACCESS METHOD The FT4000AP uses a Datatag as the access method. The Datatag we manufacture is a read/write tag, incorporating high security authentication using a cryptographic algorithm and a guaranteed 100,000 read/write cycles minimum. Data retention is 10 years minimum. The advantages of the Datatag are that there are no moving parts maintenance is therefore low, saving costs in the long term on the upkeep of the system. Datatags supplied are guaranteed for the life of the system. The datatag is a read/write device and can be programmed with many operating parameters. The datatag can be programmed either remotely at the FACT or at the PC.

8 FT4000AP 1590mm 500mm 450mm mm REPORTING For reporting purposes data is downloaded from the FACT via a communication link to an existing central PC running windows based Pacif /Ga FM software that allows reports to be viewed and / or printed from an existing PC / Printer set-up. The software can be installed and viewed on a single or multiple PC's. The FACT captures all fuelling transactions that take place, the Pacif /Ga FM PC software will download and process the fuelling transactions and put them into a readable report format. The main tasks of Pacif /Ga FM PC software are:- Communications to the fuelling terminal Programming Datatags Maintaining tables ( Driver\Fueller\Lockout ) Running Reports Stock Control Backing up data periodically Although Pacif /Ga FM incorporates some standard report formats for ease of use, the software incorporates a reports generator which gives you the ability to create and customise your own reports if required. 450mm 600mm 545mm 600mm Communications The FT4000AP can support a number or communication methods. Direct Wire - RS485, RS GSM Modem - Serial Modem - Radio Modem - Network Interface allowing the FT4000AP to form part of a LAN / WAN. 545mm Base Fixing Locations Pacif /Ga have improved on the standard for data - download, the traditional method of dealing with a fuelling transaction once it has been down-loaded to a PC has been to delete it from the FACT. The FT4000AP identifies all transactions as having been downloaded and stores them at the FACT, enabling fuelling transactions to be downloaded again in the event of a PC failure. FT4000AP - Integrated Pump / Fuel Management System - Pump Specification The pumping unit is a 230 Volt Single phase 70 Litre Per Minute fuel pump. A three metre hard wall hose and an auto cut off nozzle are supplied as standard, we can supply a longer hose if required. The unit uses a four piston displacement meter to ensure overall accuracy of fuel dispensed. The meter is accurate to +/- 0.5% which is achievable over all dispensing speeds. The FT4000AP incorporates an air separation unit. Pumping Unit: Belt Driven with Air Separation Motor: 230v Single Phase rated at 10 amp. Meter: 4 Piston Displacement Meter accurate to +/ % Cabinet: Stainless Steel with lockable front door. Display: Electronic LCD Graphics Display with Backlight. Shows up to 9,999.9 litres Period Totaliser: Shows up to 9,999,999 Litres. Lifetime Totaliser: Shows up to 9,999,999 Litres. Pump Speed: Standard 70 Litres Per Minute. ( available in 90lpm Option) Standard Equipment: Husky Auto - Cut Off Nozzle. 3 metre Steel Braided Hose. Construction The FT4000AP Cabinet is manufactured entirely from stainless steel. The unit is sturdy, robust and designed to operate in harsh environments. User Friendly, Reliable, Cost Effective Fuel Management Systems