MANUAL HOISTS & WINCHES
|
|
- Jacob Wilkins
- 7 years ago
- Views:
Transcription
1 NUL OISTS & WINES EXPERIENE TE DIFFERENE
2 SERIES ND IN OISTS Quality Product The Series are world class products of high quality, low cost, light weight and high endurance in capacities from to 0000.The key capacities, 000, 000 and 000 are lass hoists for heavyduty use giving twice the working life of lass units coonly available in the market. The orris design exceeds S EN 57* and includes safety hooks.the hoists have a safety factor of 5: (). *Grade 00 loadchain is fitted For optimised strength and wear resistance orris fit as standard an anticorrosive finish grade 80 loadchain.the has proven minimal maintenance and long life lubrication. uilt in 6 series push or hand geared trolleys are offered for to 0000 capacities. ook suspension hoists are used with 6 series trolleys with 6000 and 000 capacities providing a hung in arrangement. ook suspension is available for all capacities and all hook suspension hoists can be hung into push or hand geared orris 6 travelling trolleys. Spark Resistant & arine Specification and hain oist specially designed is suitable for use in hazardous environments where a spark resistant specification is required.the design can be supplied in both hook suspension and incorporated into spark resistant push or hand geared travelling trolleys. This range extends from to Options: Load limiter Protects the hoist against excessive overload Stainless Steel loadchain & handchain apacity reduction required Spark Resistant and marine specification SIR 05XT06 Twin pawl mechanism as standard additional safety Surface hardened gears extended working life Use of needle roller bearings high operating efficiency Self sustaining maintenance free friction brake Smooth passage of loadchain Smooth handchain operation Spark Resistant Features Include: ronze coated hooks Stainless steel ratchet pawl and handchain luminium bronze runners and chain guide rollers Zinc plated loadchain rass protected drop stops and anti tip stop Synthetic rubber buffers S Series Explosion Proof Wire Rope oists are also available.
3 Technical Data & Dimensions apacity Number of falls of load chain Dimensions ook suspension loselift (ranges &) loselift (range ungin (6 trolley, ranges &) ungin (6 trolley, range ) ungin and closelift units Track width range range range inimum clear depth of track inimum rodius of track curve Weight: hook suspension unit chain for standard m hooktohook dditional weight for extra of lift, per metre Effort on hand chain to raise working load Velocity ratio (movement of chain relative to load chain Safety factor : 5: : 5: : : 5: : 5: : : 5: : : : x 6 ook Suspension uilt In Trolley 0000 Unit Incorporating Units 8 Falls Specifications subject to change without notice NUL OISTS & WINES
4 96 SERIES ULTR LOW EDROO ND IN OISTS apacities From 000 to 0 anual chain hoists of special designs are needed when it is not possible to use standard hoists. i.e lack of space available or special environmental conditions. orris can offer the 96 Series Ultra Low eadroom and hain oist configuration for these purposes. Optional Spark Resistant & arine Specifications Other options orris offer are the Ultra Low eadroom manual hoist suitable for marine or hazardous environments.these hoists meet relevant internationally recognised standards and regulations. Fitted with overload protection as standard achined trolley wheels with roller bearings Zinc plated high quality loadchain to EN887T Zinc plated handchain to DIN 766 Use in Zone, Upto temperature class T Gas explosion group upto II Ultra low headroom Technical Data & Dimensions apacity apacity Number of hain hain Falls 5x5 6.x9. 8x 8x 8x 6x5 6x5 6x5 6x Flange Width From To For Load ar Size t 0m and hain Path and hain Pull For Weight Range Range Range Lifting Travel t m Track Per m Distance Distance m Lifting dan Travel dan eight dd. Lift Dimensions () () Supplied with ball bearing load hook from 0 upwards. Range D D () L L L L Ø D ØD SWL
5 Technical Data & Dimensions apacity Dimensions () D D L 00 L L L Ø D ØD 5 0,000 0 SWL Specifications subject to change without notice NUL OISTS & WINES 5
ENGLISH. Light Cranes. Chain Hoists
ENGLISH Light ranes hain Hoists 04 12 22 Light ranes LIGHTster ProfileMaster Electric chain hoists HINster HINsterGT Hand chain blocks RFTster 03 03 Look ahead! ontent SWF is one of the leading global
More informationJBC Newsletter Issue No. 1 / January 2015. JBC Newsletter DESIGN MANUFACTURE INSTALL. Shell Prelude FLNG
JBC Newsletter ISSUE NO. 1 / JANUARY 2015 www.jbarnsleycranes.com DESIGN MANUFACTURE INSTALL Shell Prelude FLNG Explosion proof cranes installed in Korean shipyard Conoco Phillips Ekofisk 2\4Z In Focus
More informationCHESTER HOIST LISBON, OHIO, U.S.A. 44432 PHONE (330) 424-7248 FAX (330) 424-3126
BULLETIN WD-100-06 The only complete line of worm-gear driven hoists, Chester Worm Drive Hoists are available in more than 1200 different models for lifting and moving loads from 1 to 15 tons. They may
More informationN E R / E R T H R E E P H A S E ELECTRIC C H A I N H O I S T S
N E R / E R T H R E E P H A S E ELECTRIC C H A I N H O I S T S W o r k i n g H a r d e r F o r Yo u In 1876, Edwin Harrington dramatically improved the self-sustaining hoist by introducing the worm-gear
More information127 PCS. Art. NO. 712701 Art. NO. 712702 Art. NO. 712703. www.sonic-equipment.com
7 PCS Art. NO. 770 Art. NO. 770 Art. NO. 770 8 drawers with ball bearing slides drawers completely filled with 7-pcs tools drawer blocking system, as protection against tipping over abs topblade can holder
More informationWARNING! Failure to follow these inspection procedures can cause personal injury and property damage.
GARDNER-DENVER TECHNICAL MANUAL CPTEN-136 07/03 Hoist Inspection and Maintenance Guide Inspection Record For: Hoist Model.: Hoist Serial.: WARNING! Failure to follow these inspection procedures can cause
More information2.22 - Lifting Appliances
Standards d for Certification 2.22 - Lifting Appliances Ole-Henrik Andressen and Åge Mikkelsen 29th of April 2009 Rules for Certification of Lifting Appliances 1994 Standard dadfor Certification Cet cato
More informationBringing good things ahead
Bringing good things ahead Whatever your logistic needs, we can offer a conveyor solution. Our flexible systems primary and secondary packaging for single and multi packages, can transport your goods from
More informationTHE RIGHT LIFT FOR EVERY STATION
INDUSTRIAL CRANES NUCLEAR CRANES PORT CRANES HEAVY-DUTY LIFT TRUCKS SERVICE MACHINE TOOL SERVICE WORKSTATION LIFTING SYSTEMS WORKSTATION LIFTING SYSTEMS THE RIGHT LIFT FOR EVERY STATION Workstation Lifting
More informationFredriksons conveyor systems handle goods with a width from 20 mm up to 600 mm.
Conveyor Solutions Whatever your logistic needs, we can offer a conveyor solution. Our flexible systems primary and secondary packaging for single and multi packages, can transport your goods from one
More informationPaLLe t trucks Lifting carts t r g in t if L 2435 6815 6836 6856 6842
l i f t i n g c a r t s Lifting carts The prograe for lifting, transporting and storage From the classical forklift trolley to the machine lifter, from furniture dollies to a chassis with 24 tons load
More informationSimple Machines. What are simple machines?
Definitions to know: Simple Machines Work done when an applied force causes an object to move in the direction of the force Energy ability to cause change; can change the speed, direction, shape, or temperature
More informationService life of synthetic fibre ropes in deepwater lifting operations. The 15 th North Sea Offshore Cranes & Lifting Conference Ashley Nuttall
Service life of synthetic fibre ropes in deepwater lifting operations The 15 th North Sea Offshore Cranes & Lifting Conference Ashley Nuttall Fibre ropes for deepwater lifting Fibre ropes offer the following
More informationRules for Construction of Overhead and Gantry Cranes (Top Running Bridge, Multiple Girder)
ASME NOG-1 2015 (Revision of ASME NOG-1 2010) Rules for Construction of Overhead and Gantry Cranes (Top Running Bridge, Multiple Girder) AN AMERICAN NATIONAL STANDARD ASME NOG-1 2015 (Revision of ASME
More informationAir Chain Hoists 10 & 25 Ton TCR Large Capacity Model Specifications
ir hain oists 10 & 5 Ton TR arge apacity oel Specifications ap. (Tons) oel Stanar ift (ft) TR Penant oel Specifications Push utton ose (ft) Up / own Spees (ft / min @ 90 psi) Up / own ir onsumption Rates
More informationCable Trolleys and Festoon Systems Product Catalogue
Cable Trolleys and Festoon Systems Product Catalogue Technical Information Component Specification Company Profile Established in 1972, Helm Hellas S.A. is focused on designing developing, producing and
More informationMANAGING MANUAL HANDLING A Guide for Managers and Heads of Departments
MANAGING MANUAL HANDLING A Guide for Managers and Heads of Departments HEALTH & SAFETY UNIT SPRING 2006 CONTENTS INTRODUCTION...2 REGULATION...2 WHAT IS MANUAL HANDLING?...2 RESPONSIBILITIES...2 STRATEGY...2
More informationChecking Wheel Brakes Wear
Issue 1 en 1 Checking Wheel Brakes Wear Contents Disc Brakes... 3 Removing the wheels... 4 Checking the Brake Pads... 5 Check brake disc thickness... 7 Checking brake disc for cracks... 8 Drum Brakes...
More informationThe Campbell operation facilities in York, PA, and Cortland, NY, conform to Quality Standard ISO 9001.
Campbell Blocks Table of Contents Begun as a forging company in 1834, Campbell/Brewer-Titchener first manufactured horse harnesses, then carriage hardware, then horseless carriage hardware. From hardware
More informationHose & Reel. Welding Reels. Arc Welding Gas Welding Cutting Operations
Hose & Reel P R O D U C T S Welding Reels Arc Welding Gas Welding Cutting Operations 2 Note to the designers & engineers. Welding Reels for Heavy Industry Hose & Reel Products hose reels for welding (Oxygen-acetylene
More informationTELESCOPE Motorized Lighting Suspension
TELESCOPE Motorized Lighting Suspension Mod. 8400 FEATURES The De Sisti TELESCOPE is a single point suspension specifically designed to provide rigidity and stabilization of all moving parts. It can extend
More informationINSPECTION BEFORE RIDING
INSPECTION BEFORE RIDING Check the following items before riding. ITEM Engine cum transmission oil Fuel Tyres Battery Speedometer Lighting Steering Throttle Clutch Brakes Wheels WHAT TO CHECK FOR Availability
More informationDUMP TARP KITS MANUAL TARP KITS ELECTRIC TARP SYSTEMS MECHANICAL CRANK ARM TARP SYSTEMS
ELECTRIC TARP & MANUAL SYSTEMS DUMP TARP KITS MECHANICAL CRANK ARM TARP SYSTEMS MANUAL TARP KITS ELECTRIC TARP SYSTEMS MECHANICAL CRANK ARM TARP SYSTEMS MANUAL TARP KITS TRAILER TARP KITS PARTS & ACCESSORIES
More informationCHAPTER 2 BLOCK AND TACKLE CHAPTER LEARNING OBJECTIVES
CHAPTER 2 BLOCK AND TACKLE CHAPTER LEARNING OBJECTIVES Upon completion of this chapter, you should be able to do the following: Describe the advantage of block and tackle afloat and ashore Blocks pulleys
More informationFlash Butt Welding Machines
Flash Butt Welding Machines Types AS 15 - AS 320 Flash butt welding current brake current (ka) current time flattening reversal preheating welding time flash butting forging A reliable and economic process
More informationPREASSEMBLED ELEMENTS FOR LIFTING AND SLIDING DOORS
SYSTEM COMPONENTS PREASSEMBLED ELEMENTS FOR FIFTING AND SLIDING DOORS s r ood gn i d i l s dna gn i t f i f r o f s t neme l e de l bme s s ae r P PREASSEMBLED ELEMENTS FOR LIFTING AND SLIDING DOORS These
More informationFEATURED PRODUCTS. Hoists. Use promo code: 04 Sale pricing effective 8/1/2015-9/30/2015. Applied.com
Use promo code: 04 Sale pricing effective 8/1/2015-9/30/2015 FEATURED PRODUCTS Hoists GSA Contract: GS-06F-0042R Applied.com JLH Series Lever Hoist page 4 Lodestar Electric Chain Hoist page 5 Applied Industrial
More informationManual piston sampler...m 11
SAMPLING Manual piston sampler...m 11 Screw sampler...prec 22...PREC 100 Slide sampler...pr 55 Rotative screw sampler...prv Piston sampler...p 11 Sampler on belt conveyor...pba Rotating cup sampler...pgr
More informationUNIT 7 Crane safety. Engineering CASE STUDY. Cambridge English for. Professional English. Part 1. Part 2
Professional English Cambridge English for Engineering CASE STUDY Part 1 Read the extract from a handbook about crane safety. Then discuss the questions about the underlined keywords with a partner. When
More informationI BEAM TRACK INSTALLATION
PDQ 0/700 FESTOON SYSTEM INSTALLATION AND MAINTENANCE INSTRUCTIONS INTRODUCTION The PDQ Festoon System was designed to run on one of three sizes of I-beams: S x., S8 x 8. and S x.. System trolleys must
More information12.2 Compact Type, MSB Series
12.2 Compact Type, MSB Series A. Construction Upper Retainer Carriage End Cap End Seal Rail Grease Nipple Ball Lower Retainer 45 Bottom Seal 45 B. Characteristics The trains of balls are designed to a
More informationDRIVING CLASSICS INTO THE FUTURE
DRIVING CLASSICS INTO THE FUTURE ENGINE OILS GEAR OILS FUEL ADDITIVES DRIVING CLASSICS INTO THE FUTURE Millers Oils is one of the few companies to offer a range of engine oils, transmission oils and fuel
More informationSpecification. Safelift Overhead Travelling Cranes
Specification Safelift Overhead Travelling Cranes Safelift overhead travelling cranes are Safelift products, produced by the Rossendale Group, backed by the Safelift Guarantee. GENERAL PRODUCT DESCRIPTION
More informationCalculating the service life of running steel wire ropes
Calculating the service life of running steel wire ropes Calculating the service life of running steel wire ropes by Dipl.-Ing. Roland Verreet 1. Introduction... Page 2 2. Calculating the number of sustainable
More informationSCAFFOLDING RUNWAY SYSTEM
SCAFFOLDING RUNWAY SYSTEM HANDBOOK 10/2009.2 i) Further information and detailed component information can be found in the C1 Conveyor Systems Brochure: http://www.nikoltd.co.uk/downloads/brochures/c1_overhead_conveyors_monorails.pdf
More informationNow available with full IP65 rating: Protection from dust and water jets NEW: K470 Plus covered containers
Now available with full IP65 rating: Protection from dust and water jets NEW: K470 Plus covered containers Universal container K 470 the original since 1950 Often copied but never equalled or bettered
More informationSTEWART GILL CONVEYORS Ltd
STEWART GILL CONVEYORS Ltd 550M STS SYSTEM overhead - inverted - side mounted - floor mounted - SPECIALISTS IN OVERHEAD CONVEYOR SYSTEMS 2 Index About 550M STS... 3 Track... 4 Track Supports... 5 Bends...
More informationD.C. Motors. Products and specifications subject to change without notice.
D.C. Motors Order/Technical Support - Tel: (8) 677-5 / FAX: (8) 677-865 / www.crouzet-usa.com / DC Motors Selection guide Gearbox Speed Torque max (Nm).5. Type of Gearbox 8 8 8. Power usable (w) Torque
More informationConstruction (2) Characteristics (2) Rail Type (2) Carriage Type (3) Description of Specification (4) Accuracy Grade (5) Preload Grade (6)
Contents Construction (2) Characteristics (2) Rail Type (2) Carriage Type (3) Description of Specification (4) Accuracy Grade (5) Preload Grade (6) Dust Proof (7) Dimensions of Tapped-hole Rails (8) Rail
More informationVAG Non-Return Valves
VAG Non-Return Valves VAG SKR Slanted Seat Tilting Disk Check Valve Body Shaft Disk Bearing bush Seat Technical details Nominal pressure PN 10 / PN 16 Nominal diameter DN 200...1200 Fields of application:
More informationULTRA 865HD HIGH PERFORMANCE MULTI PURPOSE GREASE
ULTRA 865HD HIGH PERFORMANCE MULTI PURPOSE GREASE Contains penetrants, lubricants and greases All weather Water-resistant Penetrates like an oil, then cures to a thick, water-resistant grease Recommended
More informationSuper Slider ADJUSTABLE FROM 3.5-12 Model #HD26229
Super Slider ADJUSTABLE FROM 3.5-12 Model #HD26229 IMPORTANT!!! ALL PERSONS USING THIS EQUIPMENT MUST READ AND UNDERSTAND ALL INSTRUCTIONS. FAILURE TO DO SO MAY RESULT IN SERIOUS INJURY OR DEATH. USERS
More informationFALL PROTECTION- Part 2 SELF INSPECTION CHECKLIST
OPTIONAL INFORMATION Name of School: Date of Inspection: Vocational Program/Course/Room: Signature of Inspector: FALL PROTECTION- Part 2 Instructions: This checklist covers fall protection systems criteria
More informationMorgue refrigeration unit
Morgue refrigeration unit The Morgue refrigeration units are made of sturdy, self-supporting walls, floor and ceiling elements. They are delivered in separate components and are to be assembled on site
More informationV47 Series Temperature Actuated Modulating Water Valves
V47 Series Temperature Actuated Modulating Water Valves Master Catalog 125 Valves, Miscellaneous (Other Than Gas) Section V Product Bulletin V47 Issue Date 0286 Application The V47 modulating valves regulate
More informationHS-Steel-Classic. Curing chambers for the concrete block industry in a proven steel version
ANLAGENTECHNIK HS-Steel-Classic Curing chambers for the concrete block industry in a proven steel version + special galvanising + simple assembly due to snap-in connections and building kit system We build
More informationArchitectural Hardware Design Guide High-performance hardware for the most demanding architectural applications
08710/STA BuyLine Architectural Hardware Design Guide High-performance hardware for the most demanding architectural applications Architectural Hardware Design Guide The full range of Stanley hinges provides
More informationWinch and Hoist Solutions
Winch and Hoist Solutions LIFTSTAR and PULLSTAR Air Series World s first lube free air winches LIFTSTAR and PULLSTAR Air Series General description The LIFTSTAR / PULLSTAR series from Ingersoll Rand are
More informationBelt Drives and Chain Drives. Power Train. Power Train
Belt Drives and Chain Drives Material comes for Mott, 2002 and Kurtz, 1999 Power Train A power train transmits power from an engine or motor to the load. Some of the most common power trains include: Flexible
More informationNorbro Series 40R Pneumatic Actuator Double Acting or Spring Return
Pneumatic Actuator Double Acting or Spring Return Since the mid-sixties the Norbro name has been recognised as the leading quarter turn actuator for industry. As proof of this, Norbro pneumatic actuators
More informationUnit 24: Applications of Pneumatics and Hydraulics
Unit 24: Applications of Pneumatics and Hydraulics Unit code: J/601/1496 QCF level: 4 Credit value: 15 OUTCOME 2 TUTORIAL 2 HYDRAULIC AND PNEUMATIC CYLINDERS The material needed for outcome 2 is very extensive
More informationHYDRAULIC LIFT TABLE CART 2200-LB.
HYDRAULIC LIFT TABLE CART 2200-LB. OWNER S MANUAL WARNING: Read carefully and understand all MACHINE ADJUSTMENT AND OPERATION INSTRUCTIONS before operating. Failure to follow the safety rules and other
More informationTube Type Oil Skimmer Comparison
Process Overview- Tube Type Oil Skimmers Oil flows down the face of the skimmer and into a sludge pan that is plumbed to a barrel. Model BG01 & BG34 or 6V Oil Skimmer 1.0 or 3/4 Diameter Collector Tube
More informationMODEL HSR-007 Direct Drive Rolling Steel
MODEL HSR-007 Direct Drive Rolling Steel 200 Fairview Road, Unit #2, Barrie, Ontario L4N 8Z8 Tel: 866-792-9968 or 705-792-9968 Fax: 705-735-9564 www.tnrdoors.com email: info@tnrdoors.com Model HSR-007
More informationLiftAlloy Chain Slings
CHAIN SLING BASICS Slings Lift-All chain slings meet or exceed all OSHA, ASME B30.9 and NACM standards and regulations. chain slings, available in 80 for 7/32" and 7/8"- /4" and 00 for 9/32"-3/4", are
More informationDrive shaft, servicing
Volkswagen Passat B6 - Drive shaft, servicing Стр. 1 из 41 40-7 Drive shaft, servicing Drive shafts, overview I - Assembly overview: Drive axle with CV joint VL100 40-7, Drive axle with CV joint VL100,
More informationSurface roughness. Picture 1: Friction coefficient as a function of surface roughness Curve 1: Roughness R z 0,5µm Curve 2: Roughness R z 5 µ
Surface roughness It is often erroneously thought that the surface of commutators or slip rings should be brilliant and polished to ensure an optimal performance of carbon brushes. Quite the reverse! Apart
More informationTwo most common lock nut groups: 1-Prevailing Torque Type Lock Nuts:
Two most common lock nut groups: 1. PREVAILING TORQUE a design feature of the lock nut produces friction between threads of mated components thereby increasing the force needed to tighten as well as loosen
More informationCleveland Tramrail Bridge Components
Cleveland Tramrail Bridge Components 1 Tarca Rail Tarca Track features specially rolled high-carbon alloy steel rail with raised treads welded to a steel flange and web. Tarca is designed to provide maximum
More informationRISK RATING SAFE WORK METHOD STATEMENT 1 HIGH 2 MEDIUM 3LOW. I approve the use of this Safe Work Method Statement: NAME: POSITION: Department Manager
RISK RATING 1 HIGH 2 MEDIUM 3LOW SAFE WORK METHOD STATEMENT Title: : Gantry Crane Operation Ref No: 1 I approve the use of this Safe Work Method Statement: NAME: POSITION: Department Manager SIGNATURE:
More informationENGLISH FORK GUIDE 2013
FORK GUIDE 2013 ENGLISH 1 With a brand which is synonymous with specialists in forest products handling attachments, BOLZONI AURAMO offers its expertise and market leading attachments for all requirements,
More informationFlygt 3068, 50Hz. Technical Specification
Flygt 3068, 50Hz Technical Specification Table of Contents Table of Contents B-pump...2 Product description...2 Motor rating and performance curves...4 C-pump...6 Product description...6 Motor rating
More informationBoom and fly capacities for this machine are listed by the following sections:
Lifting Capacities Telescopic Hydraulic Truck Crane HTC 8650 50 ton (45.36 metric ton) and fly capacities for this machine are listed by the following sections: Fully Extended Outriggers Working Range
More informationTOP RUNNING SINGLE GIRDER BRIDGE CRANE
SECTION 14630 TOP RUNNING SINGLE GIRDER BRIDGE CRANE 1.01 SUMMARY PART 1- GENERAL A. The work required under this section shall include the designing, manufacturing, shipping, installing and field testing
More informationCarton - Straight Link Machine Chain (Order Unit is Feet )
Straight Link Machine Individual chain links shown actual size in reference section page 44. Carton Uses: General utility; farm and animal Standard Material: Low carbon steel Standard Finish: Bright (BRT),
More informationMechanical Principles
Unit 4: Mechanical Principles Unit code: F/60/450 QCF level: 5 Credit value: 5 OUTCOME 3 POWER TRANSMISSION TUTORIAL BELT DRIVES 3 Power Transmission Belt drives: flat and v-section belts; limiting coefficient
More informationGEAROLOGY 4-1 WORMS AND WORM GEARS WORMS AND WORM GEARS
GEAROLOGY 4-1 4 4-2 GEAROLOGY COMMON APPLICATIONS: Worm and worm gear sets are used in many, everyday products including: electrical mixers, hubometers, right Now that you have an understanding of two
More information61W - Wafer style resilient seated butterfly valve 61L - Lugged style resilient seated butterfly valve
61W - Wafer style resilient seated butterfly valve 61L - Lugged style resilient seated butterfly valve Features Rounded polished disc edge gives full concentric sealing, lower torques, longer seat life
More informationOVERALL CONVEYOR WIDTH STEEL ALUMINUM MODEL # PER FT. 10 FT. 5 FT. PER FT. 10 FT. 5 FT. PER FT. 10 FT. 5 FT. PER FT. 10 FT. 5 FT.
Pick Smarter. Pick Better. Pick UNEX. Skatewheel (SW) Skatewheel Gravity Conveyor is ideally suited to convey lightweight packages and where operations require portable or temporary conveyor lines such
More informationMONITOR SECTION INDEX
MONITOR SECTION INDEX Daspit Tool... E2 Daspit Tool - Truck Mount... E3 Daspit Tool - Throw Down Model... E4 Alpha MA-HV4-4 Aluminum Tiller Bar Monitor... E5 Alpha-E Tiller Bar Montior - 3... E6 SharpShooter
More informationR310EN 2225 (2011.04) The Drive & Control Company
Ball Rail Systems Resist NRII R310EN 5 (011.04) he Drive & Control Company R310EN 5 (011.04) Ball Rail Systems Resist NR II Bosch Rexroth AG 3 Ball Rail Systems Resist NRII General Product Description
More informationZIG-ZAG 2035 Continuous Overhead Power Chain Conveyor
ZIG-ZAG 2035 Continuous Overhead Power Chain Conveyor 2 6 MINIMUM 3 6 MAXIMUM 5 4-3/4 1 6-1/2 1 0 TRAVEL TANGENT 2-0 STANDARD RADIUS 26-1/2 4 0 HARDWARE PACKAGE 53 A 19-3/4 42 A 9 1 2-11/16 6-3/16 17 ZIG-ZAG
More information5 axle Lowbed Semitrailer with Automatic Steering Model ST 70-93 L3. (Lowbed length approx. 14,000 mm) Technical Specification no.
5 axle Lowbed Semitrailer with Automatic Steering Model ST 70-93 L3 (Lowbed length approx. 14,000 mm) Technical Specification no. ST 70-93 L3 06/02 5 axle Lowbed Semitrailer with automatic steering Model
More informationFree Stall Cleaner System with Cable. A new generation of equipment and systems. GEA Farm Equipment Houle
Free Stall Cleaner System with Cable A new generation of equipment and systems GEA Farm Equipment Houle engineering for a better world GEA Farm Technologies SW Series Cable Drive Unit A new series of cable
More informationQ&A Session for Advanced Ball Screws 102: Troubleshooting for Design Engineers
Q&A Session for Advanced Ball Screws 102: Troubleshooting for Design Engineers Topic: Noise Q: Is there a way to predict/calculate noise on a ball screw? A: No, there is no way to calculate the noise of
More informationTHE IDEAL SOLUTION SHELVING. Sales Telephone: 01553 765205 Sales Fax: 01553 768464 Email: sales@eais-foodservice.co.uk
THE IDEAL SOLUTION Sales Telephone: 01553 765205 Sales Fax: 01553 768464 Email: sales@eais-foodservice.co.uk EZ STORE Bright Chrome Wire System g Bright Chrome wire shelves Heights 3 tier = 1650mm standard
More informationINTER PLANT STANDARD STEEL INDUSTRY
INTER PLANT STANDARD STEEL INDUSTRY CODE OF PRACTICE FOR REVAMPING OF EOT CRANES IPSS:3-02-014-03 IPSS Corresponding IS does not exist 0. FOREWORD 0.1 This Inter Plant Standard has been prepared by the
More informationErich Lacher Präzisionsteile
Nexxus Industriewerbung 2893 12.13 Printed in Germany Erich Lacher Präzisionsteile GmbH & Co. KG Certified by Im Altgefäll 22 D 75181 Pforzheim Phone: +49 (0)7231/6097-0 Fax: +49 (0)7231/6097-60 E-Mail:
More informationResistance in the Mechanical System. Overview
Overview 1. What is resistance? A force that opposes motion 2. In the mechanical system, what are two common forms of resistance? friction and drag 3. What is friction? resistance that is produced when
More informationPallet Jack. OWNER S MANUAL Model MH1230. Important Safety Instructions Assembly Instructions Parts and Hardware Identification
OWNER S MANUAL Model MH1230 Important Safety Instructions Assembly Instructions Parts and Hardware Identification Pallet Jack CAUTION: Read, understand and follow ALL instructions before using this product
More informationTigrip Load Hoisting Tackle. Grabs & Clamps. Plate clamp with safety lock model TBL. Capacity 500-3000 kg. Technical data model TBL
Plate clamp with safety lock model TBL 500-3000 This clamp is primarily used for transporting single steel plates in the vertical position, as well as lifting and turning through 180. This clamp can also
More informationTips for Eliminating and Controlling MSD Hazards
Tips for Eliminating and Controlling MSD Hazards Force Gripping tools/equipment Provide tools that allow workers to grip the tool using a power grip Eliminate the use of pinch or key grips as much as possible
More informationM E TA L C O N TA I N E R S 90
90 INDUSTRIAL CONTAINERS COLOUR VARIANTS For high capacity can be stacked up to 4 pieces (1+3). Made of moulded reinforced steel or electro-welded mesh 40 x 40 x 4mm. with wire welding in all the points
More information1x90 TONS TENSIONERS TECHNICAL PROPOSAL. 1 X 90 Tons 30 m/min Tensioners TECHNICAL PROPOSAL JOB 08/059. 0 19/02/2008 Basic proposal PP GM SB
Pagina N.: 1 of 19 1 X 90 Tons 30 m/min Tensioners JOB 08/059 0 19/02/2008 Basic proposal PP GM SB Rev N Date Issue Description Prepared by Checked by Approved by Pagina N.: 2 of 19 TABLE OF CONTENTS:
More informationBOP Handling Systems. 20 to 200 metric tons Lifting Capacity. Winch and Hoist Solutions
BOP Handling Systems 20 to 200 metric tons Lifting Capacity Winch and Hoist Solutions Table of Contents 1. BOP Handling Systems Overview...3 2. BOP Handling Systems Selection Chart... 4 3. Hercu-Link Air
More informationRATCHET RELEASE SHACKLE
RATCHET RELEASE SHACKLE INNOVATIVE PILING EQUIPMENT HYDRAULIC PILING HAMMERS EURO RATCHET RELEASE SHACKLE FOR STEEL ERECTION OPERATORS INSTRUCTIONS & SPARE PARTS LIST EXCAVATOR MOUNTED VIBRATORS EXCAVATOR
More informationMACHINE SCREW ACTUATORS 2 to 100 Tons
2 to 100 Tons Top Plate 316 S.S. Must be bolted to lifting member to prevent rotation except when screw is keyed. Lifting Screw 316 S.S. Also available as threaded end or clevis end. Shell Cap 316 S.S.
More informationIndustrial Lifting Equipment
Industrial Lifting Equipment Safety Reliability Efficiency Expertise Lifting ir Winches LIFTSTR Portable Winches - Reliable and Safe Lightweight and compact design Versatile Easy to carry. Robust steel
More informationBAGGAGE HANDLING SYSTEMS. Trastecnica S.p.A. Handling Baggage Systems Edition 2002 - Rev. 00-1 -
BAGGAGE HANDLING SYSTEMS Trastecnica S.p.A. Handling Baggage Systems Edition 2002 - Rev. 00-1 - TECHNICAL SPECIFICS INDEX Check-in with one conveyor 4 Scales 6 Belt Conveyors 8 Take away 9 Feeder and Belt
More informationPLM series Permanent load lifting magnets
Lifting gear Load lifting magnets/chain hoists PLM series Permanent load lifting magnets Load-bearing capacity of up to 1 t depending on model despite light weight High standard of safety with simple lever
More informationReel Stands and Spindles
INSTRUCTION MANUAL 687 683 656 647 684 657 Reel Stands and Spindles Read and understand all of the instructions and safety information in this manual before operating or servicing this tool. Register this
More informationHeavy Duty Lift Doors for Trade and Industry www.meiller-aufzugtueren.de
Industry Heavy Duty Lift Doors for Trade and Industry www.meiller-aufzugtueren.de For Optimum Availability of Lifts in Trade and Industry: Heavy-duty MEILLER Lift Doors. Large capacity lifts for heavy
More informationForces. Definition Friction Falling Objects Projectiles Newton s Laws of Motion Momentum Universal Forces Fluid Pressure Hydraulics Buoyancy
Forces Definition Friction Falling Objects Projectiles Newton s Laws of Motion Momentum Universal Forces Fluid Pressure Hydraulics Buoyancy Definition of Force Force = a push or pull that causes a change
More informationManufacturing Tooling Cutting Tool Design. Elements of Machining. Chip Formation. Nageswara Rao Posinasetti
Manufacturing Tooling Cutting Tool Design Nageswara Rao Posinasetti Elements of Machining Cutting tool Tool holding Guiding device Work piece Machine tool January 29, 2008 Nageswara Rao Posinasetti 2 Chip
More informationEMH, Inc. Specifications for
EMH, Inc. Specifications for Top Running Cranes Under Running Cranes Wire Rope Hoists DISCLAIMER These SPECIFICATIONS ARE INTENDED AS GENERAL GUIDELINES ONLY for technical procedure. Questions concerning
More informationMEASURING WHEEL ALIGNMENT
MEASURING WHEEL ALIGNMENT 2003-04 WHEEL ALIGNMENT Specifications & Procedures - Hummer - H2 Steering and vibration complaints are not always the result of improper alignment. One possible cause is wheel
More informationOperator Training Questionnaire
Participants Name: Company Name: Score: Test Date: Location: Crane Operator's Permit Issued on Date: Instructor: 1. A Top Running Overhead Crane is any crane that runs on two parallel runway beams over
More informationUNIT 2 GCSE PHYSICS 2.2.1 Forces and Energy 2011 FXA WORK DONE (J) = ENERGY TRANSFERRED (J) WORK
29 When a force causes an object to move through a distance, work is done. Work done, force and distance are related by the equation : W = F x d WORK When a force is applied to an object and cause it to
More informationSPECIFICATIONS FOR BOON EDAM TOMSED MODEL TUT-65TMB
SPECIFICATIONS FOR BOON EDAM TOMSED MODEL TUT-65TMB PRODUCT DESCRIPTION: BOON EDAM TOMSED MODEL TUT-65TMB STAINLESS STEEL BARCODE SCANNING ELECTRONIC REGISTERING TURNSTILE SCOPE OF OPERATION: A. The TUT-65TMB
More informationPro-Lift Steel Pile Foundation Repair
Pro-Lift Steel Pile Foundation Repair Pro-Lift Steel Pile Foundation Repair System Pro-lift steel piles are designed for the stresses of Texas soils. They can have multiple steel walls, depending on the
More information