SECTION MANUAL & ELECTRIC HOISTS AND LIFTING CLAMPS
|
|
- Augustine Garrison
- 7 years ago
- Views:
Transcription
1 SECTION 6
2 Electric Builder s Hoist PRODUCT USAGE The Electric Builder s Hoist is designed for building sites and various construction workplaces such as warehousing, buildings, storage areas, factories in general, as well as domestic applications. FEATURES Compact and lightweight design which allows easy mounting. Automatic stop switch to avoid over-winding of the rope. A reverse-winding limit lever. Double safety brake device including an electromagnet brake for instant braking. SECTION 6 Operates on single phase 240 volt power supply. 360 universal joint saddle with safety hook. Hand held control pendant with safety switch. Optional mounting arm bracket. W L H Electric Builder s Hoist Mounting Arm Bracket Max Min FREE Set of replacement brushes with each unit purchased Ø Part No Ø56 Model Code Length (L) mm Width (W) mm Height (H) mm Capacity kg Safety Factor WLL x 1.5 WLL x 1.5 WLL x 1.5 Standard Lift Motor Power/amps 1.2 / / / 8 Lifting speed m/min Wire rope mm 5mm 7x19 5mm 7x19 5mm 7x19 Minimum Grade Wire Rope G1900 IWRC G1900 IWRC G1900 IWRC Continuous usage rate p/hr (min) No. of starts per hour Control cable m Net weight kg Spare Parts Available: Power Cable TBH-230APC Control Pendant TBH-230ACP Latch Kit TBH-230-ALK Lower Hook TBH-230ALH Set of Brushes TBH-230ABS Limit Lever Assembly TBH-230ALL Wire Rope Replacement
3 SECTION 6 Hand Chain Hoist Capacity: 250kg FEATURES 3.5kg NET WEIGHT OF O N LY Model W.L.L. tonnes 0.25 Lift m 2 Test load t Headroom (hook to hook) H min. mm 230 Effort to lift full load N kg 12 No. of load chain fall lines 1 Load chain (dia. x pitch) mm ø4 x 12 A 100 B 110 C 48.5 Dimensions mm D 109 E 18 E ø 25 Net weight kg 3.5 Extra weight per metre of extra lift kg 0.54 COMPLIES WITH AS/NZS1418.2
4 LIFTING & HOISTING Hand Capacities: 250kg and 500kg FEATURES 2kg NET WEIGHT OF O N LY SECTION 6 Model W.L.L. tonnes Lift m Test load t Headroom (hook to hook) H min. mm Effort to lift full load kg No. of load chain fall lines 1 1 Load chain (dia. x pitch) mm ø4 x 12 ø5 x 15 A B C Dimensions mm D E E ø Net weight kg Extra weight per metre of extra lift kg COMPLIES WITH AS/NZS1418.2
5 SECTION 6 'S' Series Chain Hoists Capacities: 500kg to 50 tonnes FEATURES maximum load thrust race brake with unique Twin Pawls B C B C A A Product Code Working Load Limit 0.5 t 1 t 1.5 t 2 t 3 t 5 t 10 t Standard lift 3 m 3 m 3 m 3 m 3 m 3 m 3m Falls of chain Effort to lift W.L.L. 23 kg 30 kg 32 kg 35 kg 27 kg 41 kg 39 kg Net weight 10 kg 12 kg 13 kg 22 kg 32 kg 46 kg 68 kg Loadchain diameter 6 mm 6 mm 8 mm 8 mm 8 mm 10 mm 10 mm CLEARANCE DIMENSIONS (mm) A (Headroom) B (Width) C (Depth) Hook opening (upper) Hook opening (lower) Optional Chain Bags available. tonne available on application. COMPLIES WITH AS/NZS Meets or exceeds all relevant world standards
6 Capacities: 500kg to 6 tonnes FEATURES SECTION 6 A C C B H D H D E E Product Code COMPLIES WITH AS/NZS1418.2
7 SECTION 6 LIFTING & HOISTING Lever Hoists Capacities: 750kg to 6 tonnes FEATURES 1.5t, 3t and 6t models fitted with Grade 100 chain throat opening and deformation indicators IMPORTANT FEATURE activate brake 0.75, 1, 1.5 & 3 tonne 6 tonne Capacity Model No. of Chain Load Effort Net Wt. Extra Wt. (tonnes) No. Falls dia. Chain to Lift with per m Dimensions (mm) (mm) Grade Rated 1.5m Lift (kg) Load (kg) (kg) a b c d H COMPLIES WITH AS/NZS Meets or exceeds all relevant world standards
8 LIFTING & HOISTING Loadsafe Chain Hoists Capacities: 500kg to 30 tonnes FEATURES maximum load thrust race brake with unique Twin Pawls SECTION 6 B C B C A A Product Code Working Load Limit 0.5 t 1 t 1.5 t 2 t 3 t 5 t 10 t Standard lift 3 m 3 m 3 m 3 m 3 m 3 m 3m Falls of chain Effort to lift W.L.L. 23 kg 30 kg 32 kg 35 kg 27 kg 41 kg 39 kg Net weight 10 kg 12 kg 13 kg 22 kg 32 kg 46 kg 68 kg Loadchain diameter 6 mm 6 mm 8 mm 8 mm 8 mm 10 mm 10 mm CLEARANCE DIMENSIONS (mm) A (Headroom) B (Width) C (Depth) Hook opening (upper) Hook opening (lower) tonne available on application. COMPLIES WITH AS/NZS Meets or exceeds all relevant world standards
9 SECTION 6 LIFTING & HOISTING Loadsafe Lever Hoists Capacities: 750kg to 9 tonnes FEATURES maximum load A C C B H D H D 0.75, 1.5 & 3 tonne 6 tonne Product Code Working Load Limit Tonnes Standard Lift m Test Load kn Headroom H mm Effort on lever to lift full load kg No. of load chain falls Diameter of load chain mm Length of lever handle: D mm Clearance mm COMPLIES WITH AS/NZS Meets or exceeds all relevant world standards A B C E Net Weight kg
10 10 tonne (WLL) Product Code: mm 64mm 398mm 85mm 207mm Hand Chain Hoists Titan have been a leader in the development and manufacture of quality, reliable chain hoists in the Australian market for over 25 years. We are proud to announce the addition to our range with these large lift models in 10, 20, 30 and 50 tonne capacities. With their advanced design and performance these new hoists have applications in heavy engineering, construction, marine, offshore exploration and mining industries. Each hoist is factory overload tested and comes with test certificate and operating instruction manual. Available in special lift heights or with optional Overload Protection. Full technical support and on-site service always available. SECTION 6 Working Load Limit (WLL) Standard Lift 10 t 3m Falls of Chain 4 Hand Effort to Lift WLL Net Weight Load Chain Diameter 39kg 68kg 10mm 20 tonne (WLL) Product Code: mm 215mm Working Load Limit (WLL) Standard Lift 20 t 3m Falls of Chain 8 Hand Effort to Lift WLL 42kg x 2 890mm Net Weight Load Chain Diameter 193kg 10mm 85mm 110mm
11 SECTION 6 FEATURES: Strong robust construction 30 tonne 466mm 639mm Complies to AS/NZS ALL HOISTS AVAILABLE WITH OPTIONAL OVERLOAD PROTECTION 1179mm 110mm 50 tonne 962mm 2578mm 2578mm R mm 170mm
12 Combined Hoisting Assembly 'S' Series Chain Block Close Coupled to Push or Geared Girder Trolley Capacities: 1 tonne to 5 tonnes FEATURES offers minimum headroom and theft protection protection as optional extra SECTION 6 Product Code Rated Capacity tonnes Test load kn Min. radius m Pulling force to lift full load N Standard Lift m A B Dimensions C mm D E M22 M27 M30 M42 F Beam width mm Min. headroom H mm COMPLIES WITH AS/NZS1418.2
13 SECTION 6 Push & Geared Girder Trolleys Push type Capacities: 500kg to 10 tonnes FEATURES wheels Product Code Rated Capacity 0.5 t 1 t 2 t 3 t 5 t 10 t Adjustable Beam Width mm A Clearance mm B Dimensions C H Min. Radius Curve m Net Weight kg Geared type Capacities: 1 tonne to 50 tonnes FEATURES Product Code Rated Capacity 1 t 2 t 3 t 5 t 10 t Adjustable Beam Width mm A Clearance mm B Dimensions C H Min. Radius Curve m Net Weight kg wheels Trolley Wheels Single Flange Plain Type Capacities: 500kg to 10 tonnes FEATURES Trolley wheels have a machined thread Universal beams ball FULLY FORGED Oz Blok Trolley Wheel Axles Product Capacity Dia. Code on 4 D A B C H L M N O P wheels mm mm mm mm mm mm mm mm mm mm kg M tonne M tonne M tonne M tonne M tonne M48 67
14 10 tonne A C H F B E Geared Girder Trolleys Titan now offer Geared Girder Trolleys in these large capacities for use with Hand Chain Hoists and other applications. SECTION 6 A F B M F D C E H Designed to suit a wide range of A 8mm B these Trolleys have many heavy construction and marine industries. Complies with AS/NZS E C H 50 tonne Product Code Rated Capacity 10 t 20 t 30 t 50 t FEATURES: width within range. with machined tread for smooth operation. Standard Adj. Beam Width* mm ** ** A B Clearance Dimensions mm C E F H Min. Radius Curve m Net Weight kg * **
15 SECTION 6 Girder Clamps Girder Trolley with Clamp Girder Clamps Capacities: 1 tonne to 10 tonnes FEATURES protection any girder width in range Working Adjustable A B C D E F G H Product Load Beam Code Limit Width max. min. max. max. min. min. kg mm mm mm mm mm mm mm mm mm mm mm COMPLIES WITH AS4991 Girder Trolley with Clamp Capacities: 1 tonne to 5 tonnes FEATURES protection any girder width in range Product Code Working Load Limit kg Test load kn Min. radius mm A Clearance B Dimensions mm C ø20 ø20 ø24 ø24 D H Beam width mm Net Weight kg COMPLIES WITH AS1418.2
16 Recovery Winches & Load Brake Winches Wire Rope Recovery Winches Capacities: 800kg, 1600kg & 3200kg FEATURES SECTION 6 Model Code Stainless Steel Hand Winches Capacities: 545kg, 820kg & 1200kg (Pulling) FEATURES COMPLIES WITH AS Model
17 SECTION 6 Plate Universal Capacities: 500kg to 5 tonnes FEATURES Product Code Rated capacity t Test Load kn Max. Jaw opening mm A B C Dimensions D mm E F G H Net Weight kg Volume cm 23 x 5 x x 7 x x 8 x x 11 x x 14 x 27 COMPLIES WITH AS4991 Horizontal Capacities: 1.5tonne to 5 tonnes FEATURES Product Code Max. Jaw Opening mm A B Dimensions mm C D max Net. Weight kg single Volume cm 17 x 12 x x 13 x x 15 x 23 COMPLIES WITH AS4991
18 CROSBY LIFTING CLAMPS SECTION 6
19 SECTION 6 SAFETY & QUALITY RANGE OF PLATE LIFTING CLAMPS Products Available. Universal Vertical Safety Lifting Clamps Model IPUZ IPUZ suitable for lifting, turning (180 degrees) and vertical transfer of steel plates and constructions. The IPUZ lifting clamp is fitted with a locking device for both open nd closed positions, which ensures complete safety. Fitted with a hinged hoisting eye moving in all directions so as to enable the user to place and lift the load from any direction. Vertical Safety Lifting Clamps Model IPZ IPZ suitable for the lifting, turning (180 degrees) and vertical transfer of steel plates and constructions. The IPZ lifting clamp is fitted with a locking device for both open and closed positions, which ensures complete safety. Horizontal Safety Lifting Clamps Model IPHTONZ IPHTONZ suitable for the lifting and tansfer in horizontal position of non-sagging steel plates. Light-weight clamp. The IPHTONZ lifting clampsmay also be used handing vertically under a spreader beam. ALSO AVAILABLE: Drum Clamps & Beam Clamps. For further information or a comprehensive brochure on IP plate clamps, please contact your nearest COOKES branch. BEFORE USING THE CLAMPS ALWAYS READ THE INSTRUCTION MANUAL SUPPLIED WITH THE CLAMP. Product Code Model Capacity (kg) Jaw (mm) Weight (mm) IPUN 1, IPUN 2, IPUZ 3, IPSUZ 3, IPUZ 4, IPSU 4, IPUNZ 6, IPSUNZ 6, IPUNZ 9, IPSUNZ 9, IPN 1, IPN 2, IPZ 3, IPSZ 3, IPZ 4, IPSZ 4, IPNZ 6, IPSNZ 6, IPNZ 9, IPSNZ 9, IPHTONZ IPHTONZ 1, IPHTONZ 3, IPHTONZ 4, IPHTONZ 6, IPHTONZ 9,
20 SECTION 6
21 SECTION 6 KITO MANUAL OPERATED LEVER HOISTS & CHAIN BLOCKS Cross Reference Index, Kito Products ccomply with AS/NZS Standards. LARGER LIFTING CAPACITY CHAIN BLOCKS ARA AVAILABLE FROM 15T TO 50T ON REQUEST. Rating & Description Lift (m) Kito Code Cookes Code Rating & Description 0.25T Mini Lever Hoist 1m LX T CB Chain Block 3m CB T Mini Lever Hoist 1m LX T CB Chain Block 3m CB T L5 Lever Hoist 1.5m LB T CB Chain Block 3m CB T L5 Lever Hoist 1.5m LB T CB Chain Block 3m CB T L5 Lever Hoist 1.5m LB T CB Chain Block 3m CB T L5 Lever Hoist 1.5m LC T CB Chain Block 3m CB T L5 Lever Hoist 1.5m LC T CB Chain Block 3m CB T L5 Lever Hoist 1.5m LC T CB Chain Block 3m CB T L5 Lever Hoist 1.5m LC T CB Chain Block 3m CB KITO ER2 ELECTRIC CHAIN HOIST SYSTEMS 3 PHASE (DUAL SPEEDS C/W INVERTER) Cross Reference Index. Kito Electric Hoists are inspected by Cookes in compliance with JIS B8815. DUAL SPEED MOTORISED TROLLEY S AVAILABLE ON REQUEST. Lift (m) Kito Code Cookes Code Lift Rating & Description Cookes Hoist Code Kito Hoist Code Code Motor Trolley Kito Model ER2M Code Gear Trolley Kito Model ER2SG Code Push Trolley Kito Model ER2SP 125kg Single Speed ER HT ER2M001H-S/L HG ER2SG001H HP ER2SP001H 250kg Single Speed ER _T ER2M003_-S/L _G ER2SG003_ _P ER2SP003_ 500kg Single Speed ER _T ER2M005_-S/L _G ER2SG005_ _P ER2SP005_ 1000kg Single Speed ER _T ER2M010_-S/L _G ER2SG010_ _P ER2SP010_ 1500kg Single Speed ER ST ER2M015S-S/L SG ER2SG015_ SP ER2SP015S 2000kg Single Speed ER _T ER2M020_-S/L _G ER2SG020_ _P ER2SP020_ 2500kg Single Speed ER ST ER2M025S-S/L SG ER2SG025S SP ER2SP025S 3000kg Single Speed ER ST ER2M030S-S/L SG ER2SG030S SP ER2SP030S 5000kg Single Speed ER ST ER2M050S-S/L SG ER2SG050S SP ER2SP050S 7500kg Single Speed ER2M075S-L SG ER2SG075S 10,000kg Single Speed ER _T ER2M100_-L _G ER2SG100_ 15,000kg Single Speed ER ST ER2M150S-L SG ER2SG150S 20,000kg Single Speed ER ST ER2M200S-L SG ER2SG200S DUAL SPEED S/SPEED TROLLEY 125kg Dual Speed ER2-001I HT ER2M001IH-S/L HG ER2SG001IH HP ER2SP001IH 250kg Dual Speed ER2-003I _T ER2M003I_-S/L _G ER2SG003I_ _P ER2SP003I_ 500kg Dual Speed ER2-005I _T ER2M005I_-S/L _G ER2SG005I_ _P ER2SP005I_ 1000kg Dual Speed ER2-010I _T ER2M010I_-S/L _G ER2SG010I_ _P ER2SP010I_ 1500kg Dual Speed ER2-015I ST ER2015IS-S/L SG ER2SG015IS SP ER2SP005IS 2000kg Dual Speed ER2-020I _T ER2M020I_-S/L _G ER2SG020I_ _P ER2SP020I_ 2500kg Dual Speed ER2-025I ST ER2025IS-S/L SG ER2SG025IS _P ER2SP025IS 3000kg Dual Speed ER2-030I ST ER2030IS-S/L SG ER2SG030IS _P ER2SP030IS 5000kg Dual Speed ER-2-050I ST ER2050IS-S/L SG ER2SG050IS _P ER2SP050IS KITO INDIVIDUAL TROLLEYS & PENDANTS ORDER CODE INDEX Trolley s List Are 3 Phase. Rating Single Speed Trolley Dual Speed Trolley Push Button Control Gear Trolley 125kg ST DT PC GT 250kg ST DT PC GT 500kg ST DT PC GT 1000kg ST DT PC GT 1500kg ST DT PC GT 2000kg ST DT PC GT 2500kg ST DT PC GT 3000kg ST DT PC GT 5000kg ST DT PC GT 7500kg 10,000kg 15,000kg 20,000kg ST ST ST ST
22 SECTION 6
23 SECTION 6
24 SECTION 6
25 SECTION 6
26 SECTION 6
27 SECTION 6
28 SECTION 6
29 SECTION 6
30 SECTION 6
31 SECTION 6
32 SECTION 6
33 SECTION 6
34 SECTION 6
35 SECTION 6
36 SECTION 6
37 SECTION 6
38 SECTION 6
39 SECTION 6
40 SECTION 6
41 SECTION 6
42 SECTION 6
43 SECTION 6
44 SECTION 6
45 SECTION 6
46 SECTION 6
47 SECTION 6
48 SECTION 6
49 SECTION 6
50 SECTION 6
51 SECTION 6
52 SECTION 6
53 SECTION 6
54 SECTION 6
TELESCOPE Motorized Lighting Suspension
TELESCOPE Motorized Lighting Suspension Mod. 8400 FEATURES The De Sisti TELESCOPE is a single point suspension specifically designed to provide rigidity and stabilization of all moving parts. It can extend
More informationPLM series Permanent load lifting magnets
Lifting gear Load lifting magnets/chain hoists PLM series Permanent load lifting magnets Load-bearing capacity of up to 1 t depending on model despite light weight High standard of safety with simple lever
More informationCHESTER HOIST LISBON, OHIO, U.S.A. 44432 PHONE (330) 424-7248 FAX (330) 424-3126
BULLETIN WD-100-06 The only complete line of worm-gear driven hoists, Chester Worm Drive Hoists are available in more than 1200 different models for lifting and moving loads from 1 to 15 tons. They may
More informationThe mechanics finish work on time today...
The mechanics finish work on time today......and the next crane mounting too. Crane component kits by SWF Krantechnik Your mechanics are satisfied. Your customer is satisfied. You are satisfied. And that
More informationCOMPACT. Drilling COMPACT
COMPACT Our latest machine development still produced here in our own factory. This machine combines all our previous experience and knowledge in building drilling machines but at a reduced cost base.
More informationOVERALL CONVEYOR WIDTH STEEL ALUMINUM MODEL # PER FT. 10 FT. 5 FT. PER FT. 10 FT. 5 FT. PER FT. 10 FT. 5 FT. PER FT. 10 FT. 5 FT.
Pick Smarter. Pick Better. Pick UNEX. Skatewheel (SW) Skatewheel Gravity Conveyor is ideally suited to convey lightweight packages and where operations require portable or temporary conveyor lines such
More informationFredriksons conveyor systems handle goods with a width from 20 mm up to 600 mm.
Conveyor Solutions Whatever your logistic needs, we can offer a conveyor solution. Our flexible systems primary and secondary packaging for single and multi packages, can transport your goods from one
More information2. Crane standing on firm, horizontal ground.
The operating weight includes the basic machine with HD undercarriage, 2 main winches 300 kn with speed change gear and 11 m boom, consisting of A frame, boom foot (4 m), boom head section (6.4 m), boom
More informationWOLFFKRAN. 1 Schedule drawing. 1.1 Schedule drawing, WOLFF 6023.6clear. max. hook height above ground. Data WOLFF 6023.6clear
1 Schedule drawing 1.1 Schedule drawing, WOLFF 6023.6clear [X] max. hook height above ground Data WOLFF 6023.6clear Item Crane type Design Type of setup Basis of calculation Payload torque Hoist winch
More informationENGLISH. Light Cranes. Chain Hoists
ENGLISH Light ranes hain Hoists 04 12 22 Light ranes LIGHTster ProfileMaster Electric chain hoists HINster HINsterGT Hand chain blocks RFTster 03 03 Look ahead! ontent SWF is one of the leading global
More informationWinch and Hoist Solutions
Winch and Hoist Solutions LIFTSTAR and PULLSTAR Air Series World s first lube free air winches LIFTSTAR and PULLSTAR Air Series General description The LIFTSTAR / PULLSTAR series from Ingersoll Rand are
More informationTHE RIGHT LIFT FOR EVERY STATION
INDUSTRIAL CRANES NUCLEAR CRANES PORT CRANES HEAVY-DUTY LIFT TRUCKS SERVICE MACHINE TOOL SERVICE WORKSTATION LIFTING SYSTEMS WORKSTATION LIFTING SYSTEMS THE RIGHT LIFT FOR EVERY STATION Workstation Lifting
More informationBringing good things ahead
Bringing good things ahead Whatever your logistic needs, we can offer a conveyor solution. Our flexible systems primary and secondary packaging for single and multi packages, can transport your goods from
More informationWorldwide network in over 40 countries.
Worldwide network in over 40 countries. April 2012 56 rue de Neuilly 93136 Noisy le Sec Cedex - France Tel : +33 (0)1 49 42 72 95 Fax : +33 (0)1 48 44 00 02 E-mail : contact@ptc.fayat.com PTC s vibrodrivers
More informationTOP RUNNING SINGLE GIRDER BRIDGE CRANE
SECTION 14630 TOP RUNNING SINGLE GIRDER BRIDGE CRANE 1.01 SUMMARY PART 1- GENERAL A. The work required under this section shall include the designing, manufacturing, shipping, installing and field testing
More informationN E R / E R T H R E E P H A S E ELECTRIC C H A I N H O I S T S
N E R / E R T H R E E P H A S E ELECTRIC C H A I N H O I S T S W o r k i n g H a r d e r F o r Yo u In 1876, Edwin Harrington dramatically improved the self-sustaining hoist by introducing the worm-gear
More informationMECHANICAL PRINCIPLES OUTCOME 4 MECHANICAL POWER TRANSMISSION TUTORIAL 1 SIMPLE MACHINES
MECHANICAL PRINCIPLES OUTCOME 4 MECHANICAL POWER TRANSMISSION TUTORIAL 1 SIMPLE MACHINES Simple machines: lifting devices e.g. lever systems, inclined plane, screw jack, pulley blocks, Weston differential
More informationRT100 ROUGH TERRAIN CRANE DATASHEET - IMPERIAL. Features:
ROUGH TERRAIN CRANE DATASHEET - IMPERIAL Features: Rated capacity: 100 ton @ 10 ft working radius Maximum boom length: 174 ft Maximum tip height: 183 ft Maximum hook height: 174.5 ft CONTENTS Key............................................................................................
More informationRack installation instructions
Rack installation instructions Review the documentation that comes with the rack cabinet for safety and cabling information. Before you install the server in a rack cabinet, review the following guidelines:
More informationIn safe hands. Ifor Williams Trailers. Since 1958, people have put their trust in our trailers, just ask an owner - they re
Ifor Williams Trailers In safe hands Since 1958, people have put their trust in our trailers, just ask an owner - they re not difficult to find. As specialists in trailer design and engineering, we have
More informationINSTRUCTIONS AND PARTS LIST SINGLE GIRDER UNDERHUNG CRANE BRIDGE KITS 1/2 THRU 10 TON HAND GEARED AND MOTOR DRIVEN
INSTRUCTIONS AND PARTS LIST SINGLE GIRDER UNDERHUNG CRANE BRIDGE KITS 1/2 THRU 10 TON HAND GEARED AND MOTOR DRIVEN JUNE, 1999 COPYRIGHT 1999, Columbus Mckinnon Corporation PART NO. 113533-71 Page 1 COLUMBUS
More informationBelt Conveyor System
Belt Driven Conveyors the cost effective solution for transporting unit loads. Systems Handling Services range of powered belt conveyors is designed for applications where improved load control and speed
More informationProduct Data Sheets. Belt Conveyor System
Product Data Sheets Belt Conveyor System Belt Conveyor System Belt Driven Conveyors the cost effective solution for transporting unit loads. Texam Limited s range of powered belt conveyors is designed
More informationGlossary of Common Crane Ter ms:
Glossary of Common Crane Ter ms: 26 Adjustable brakes: Electro-mechanical device to control crane deceleration. Bridge beam: Traveling beam connected to end trucks - supports trolley hoist and load. Bumpers:
More informationEXPORT w w w. k r a n m a n. c o m
EXPORT Kranman T1700 4WD series for ATV. Hydraulic unit KS-780 Facts: standard equipped T1700 Trailer T1700 4WD Total width 1.340 mm 4WD drive Hydraulic Total length 3000-3900 mm Pivoting stays 4 Load
More informationADD CURRENT FEATURES AND TECHNOLOGIES TO YOUR CRANE
INDUSTRIAL CRANES NUCLEAR CRANES PORT CRANES HEAVY-DUTY LIFT TRUCKS SERVICE MACHINE TOOL SERVICE RETROFITS ADD CURRENT FEATURES AND TECHNOLOGIES TO YOUR CRANE 2 Konecranes Retrofits RETROFITS MADE EASY
More informationSELF-STEERING AXLE TABLE OF CONTENTS
SELF-STEERING AXLE TABLE OF CONTENTS Section 1 - Introduction Section 2 - Pre-Installation Check List Section 3 - Ride Height Adjustments Section 4 - Suspension Mount Section 5 - Axle Mount Section 6 -
More information5 axle Lowbed Semitrailer with Automatic Steering Model ST 70-93 L3. (Lowbed length approx. 14,000 mm) Technical Specification no.
5 axle Lowbed Semitrailer with Automatic Steering Model ST 70-93 L3 (Lowbed length approx. 14,000 mm) Technical Specification no. ST 70-93 L3 06/02 5 axle Lowbed Semitrailer with automatic steering Model
More informationPREASSEMBLED ELEMENTS FOR LIFTING AND SLIDING DOORS
SYSTEM COMPONENTS PREASSEMBLED ELEMENTS FOR FIFTING AND SLIDING DOORS s r ood gn i d i l s dna gn i t f i f r o f s t neme l e de l bme s s ae r P PREASSEMBLED ELEMENTS FOR LIFTING AND SLIDING DOORS These
More informationOperator s Manual EVENTER 20 / 25 Series Lifts
Operator s Manual EVENTER 20 / 25 Series Lifts May 2013! Before operating this lift, read and understand this Operator s Manual. Become familiar with the potential hazards of this unit. Call SUMNER should
More informationIngersoll-Rand LIFTSTAR. Manriding Winches. Classification and compliance with safety requirements
Classification and compliance with safety requirements Meet the toughest personnel lifting requirements in the offshore industry The LIFTSTAR RLP Manriding winches are designed to the toughest type approval
More informationENGLISH FORK GUIDE 2013
FORK GUIDE 2013 ENGLISH 1 With a brand which is synonymous with specialists in forest products handling attachments, BOLZONI AURAMO offers its expertise and market leading attachments for all requirements,
More information18. CARGO TROLLEYS, LIFTING TABLES, HYDRAULIC TABLE TRUCKS, HAND TROLLEYS
18. CARGO TROLLEYS, LIFTING TABLES, HYDRAULIC TABLE TRUCKS, HAND TROLLEYS CARGO TROLLEYS LIFTING TABLES HYDRAULIC TABLE TRUCKS HAND TROLLEYS 18 CARGO TROLLEYS CARGO TROLLEYS 1500 KG groove in the centre
More informationMemberships. W.F. Welding & Overhead Cranes Ltd. Since 1986. W.F. Welding & Overhead Cranes. 1-200 Ton Overhead Cranes. Jib Cranes.
Memberships Canadian Standards Association (CSA) W.F. is approved by the Canadian Welding Bureau and certified to CSA standard W47.1-03-Division 1. Other memberships include: W.F. Welding & Overhead Cranes
More informationSpecification. Safelift Overhead Travelling Cranes
Specification Safelift Overhead Travelling Cranes Safelift overhead travelling cranes are Safelift products, produced by the Rossendale Group, backed by the Safelift Guarantee. GENERAL PRODUCT DESCRIPTION
More informationERIKKILA INDUSTRIAL CRANES
ERIKKILA INDUSTRIAL CRANES Capacity up to 20 000 kg BRIDGE CRANES - Overhead - Under running GANTRY CRANES I-GIRDER JIB CRANES LIFTING BEAMS SERVICE ERIKKILA Reliable lifting for almost 100 years ERIKKILA
More informationDUMP TARP KITS MANUAL TARP KITS ELECTRIC TARP SYSTEMS MECHANICAL CRANK ARM TARP SYSTEMS
ELECTRIC TARP & MANUAL SYSTEMS DUMP TARP KITS MECHANICAL CRANK ARM TARP SYSTEMS MANUAL TARP KITS ELECTRIC TARP SYSTEMS MECHANICAL CRANK ARM TARP SYSTEMS MANUAL TARP KITS TRAILER TARP KITS PARTS & ACCESSORIES
More informationFront axle components, overview
just a test. Front axle components, overview 40-1 General Information Load bearing components and parts of the suspension must not be welded or straightened. Vehicles without drive axle must not be moved,
More informationPallet Jack. OWNER S MANUAL Model MH1230. Important Safety Instructions Assembly Instructions Parts and Hardware Identification
OWNER S MANUAL Model MH1230 Important Safety Instructions Assembly Instructions Parts and Hardware Identification Pallet Jack CAUTION: Read, understand and follow ALL instructions before using this product
More informationZAPPY 3 OWNER S MANUAL. Read this manual completely before riding your Electric ZAPPY 3.
ZAPPY 3 OWNER S MANUAL Read this manual completely before riding your Electric ZAPPY 3. TECHNICAL INFORMATION Model No. : ZAPPY 3 Product size Type of motor Motor power Battery type Battery Charger Charging
More informationTENDER DOCUMENT. NIT No.: WEX/SP/CH/Crane/2012-13 Dt.20.12.2012 BHARAT HEAVY ELECTRICALS LIMITED, HEEP, RANIPUR, HARIDWAR-249403
TENDER DOCUMENT Retrofitting of existing 10 MT Chain Wheel Operated Overhead Double Girder Crane by Electric Wire Rope Hoist of 10MT in Compressor House, HEEP, BHEL, Hardwar NIT No.: WEX/SP/CH/Crane/2012-13
More informationPOLE MOUNT SYSTEM-3 INSTALLATION
1 May 2014 POLE MOUNT SYSTEM-3 INSTALLATION The Pole Mount System-3 is an easy to install and flexible system designed to allow ONE SYSTEMS loudspeaker products to be mounted to pole structures. The only
More informationMinimum Breaking Force of Wire Rope (for Winches) 6 x 19 Classification / Bright (Uncoated), IWRC
Minimum Breaking Force of Wire Rope (for Winches) 6 x 19 Classification / Bright (Uncoated), IWRC Wire rope Selection Rope Size (in) Approximate Weight (lb / ft) Minimum Breaking Force Extra Improved Plow
More informationCable Trolleys and Festoon Systems Product Catalogue
Cable Trolleys and Festoon Systems Product Catalogue Technical Information Component Specification Company Profile Established in 1972, Helm Hellas S.A. is focused on designing developing, producing and
More informationInstallation guide for the SafeLine type anchorage device. Tested in compliance with EN 795: 1996. No.: SE-...
Installation guide for the SafeLine type anchorage device Tested in compliance with EN 795: 1996 No.: SE-... Version: 09.10.2008 SE 67 Subject to technical alterations! Contents 1. General information
More informationDANGER DANGER. General Information. Safety Is Your Responsibility. Ordering Parts. Contact Information
Safety Safety Is Your Responsibility DANGER To avoid personal injury or death, carefully read and understand all instructions pertaining to the Anthony Liftgates product. Do not attempt to install, operate,
More informationPOLE MOUNT SYSTEM EX-3 INSTALLATION
May 2014 POLE MOUNT SYSTEM EX-3 INSTALLATION The Pole Mount System EX-3 is an easy to install and flexible system designed to allow ONE SYSTEMS loudspeaker systems to be mounted to pole structures. The
More informationBest/Flex Roller Expandable Conveyor
Best Diversified Products Ltd. Best/Flex Roller Expandable Conveyor Product Manual Best Diversified Products Ltd. Brunel Road, Earlstrees Industrial Estate Corby, Northants. NN17 4JW Tel: +44(0) 1536 206969
More informationSAFE HANDLING OF PRECAST CONCRETE PRODUCTS
SAFE HANDLING OF PRECAST CONCRETE PRODUCTS Safety Handling of Precast Concrete Products The lifting of any precast product requires the use of special equipment and substantial planning and knowledge.
More informationSeries 90 Portable Capstan Hoist. Owners Manual ! CAUTION
Series 90 Portable Capstan Hoist Owners Manual! CAUTION The equipment covered in this document should be installed, used, and serviced only by competent personnel familiar with and following good work
More informationKIRÁLY TRADING KFT H-1151 Budapest Mogyoród útja 12-14 tel: 061307-3801 Email_pzoli@kiralytrading.hu. Clamps Clamping devices
04000 Clamps Clamping devices 23000 22000 21000 20000 09000 08000 07000 06000 05000 04000 03000 02000 01000 297 04010 Adjustable straps Tempered steel 1.1191 Black oxide finish nlm 04010-101 Suitable thrust
More informationContents. 1. Foreword 1. 2. Common accidents in lifting operations 2. 3. Legislative requirements and code of practice of lifting operations 2
Contents 1. Foreword 1 2. Common accidents in lifting operations 2 3. Legislative requirements and code of practice of lifting operations 2 4. People 3 5. Machinery 5 5.1 Cranes 6 5.1.1 Mobile crane 7
More informationINTER PLANT STANDARD STEEL INDUSTRY
INTER PLANT STANDARD STEEL INDUSTRY CODE OF PRACTICE FOR REVAMPING OF EOT CRANES IPSS:3-02-014-03 IPSS Corresponding IS does not exist 0. FOREWORD 0.1 This Inter Plant Standard has been prepared by the
More informationCable Hoist. Operating, Maintenance & Parts Manual. Follow all instructions and warnings for LMCA680. Americrane & Hoist Corp.
Americrane & Hoist Corp. -800-5-93 Cable Hoist LMCA80 Operating, Maintenance & Parts Manual Cable Hoist Follow all instructions and warnings for inspecting, maintaining and operating this hoist. The use
More informationI BEAM TRACK INSTALLATION
PDQ 0/700 FESTOON SYSTEM INSTALLATION AND MAINTENANCE INSTRUCTIONS INTRODUCTION The PDQ Festoon System was designed to run on one of three sizes of I-beams: S x., S8 x 8. and S x.. System trolleys must
More informationZIG-ZAG 2035 Continuous Overhead Power Chain Conveyor
ZIG-ZAG 2035 Continuous Overhead Power Chain Conveyor 2 6 MINIMUM 3 6 MAXIMUM 5 4-3/4 1 6-1/2 1 0 TRAVEL TANGENT 2-0 STANDARD RADIUS 26-1/2 4 0 HARDWARE PACKAGE 53 A 19-3/4 42 A 9 1 2-11/16 6-3/16 17 ZIG-ZAG
More informationEXTeRUS. EXTeRUS - With patented design, able to join technology. and quality of materials with a charming shape. Unique
EXTeR US G L A S S - With patented design, able to join technology and quality of materials with a charming shape. Unique thanks to its outstanding loading capability with 150 kg maximum weight and height
More informationITEM DESCRIPTION SPECIFICATION TENDER OFFER
TECHNICAL SPECIFICATIONS PL1 & PL2 PLEASE TICK IF YOU COMPLY. SPECIFY YOUR OPTION IF YOU DON'T. ITEM DESCRIPTION SPECIFICATION TENDER OFFER Make (please specify) 1.0 Type Duplex Passenger Lift 2.0 Minimum
More informationSIMRAD SD10 Sailboat Drive
INSTALLATION MANUAL SIMRAD SD10 Sailboat Drive 20222683/A English Simrad SD10 Sailboat Drive About this document Rev. A First issue 2007 Navico AS. All rights reserved. No part of this work covered by
More informationDryLin ZLW Belt Drive
Belt Drive +50º 0º DryLin toothed belt drives have been developed for the fast positioning of small loads. The linear units with toothed belt drive are corrosion resistant, light and compact, besides having
More informationHand chain 6,0m 1000kg
Manual Hand chain 6,0m 1000kg Table of contents 1. Safety instructions... 3 1.1. For safe and efficient operation... 3 2. Designated use of the chain hoist... 4 3. Start-up... 5 4. Maintenance and cleaning...
More informationMVX-Series Diesel Engine Air Shut Down Valves
MVX-Series Diesel Engine Air Shut Down Valves (Cable operated closure/integral reset lever types) Selection, Application and Maintenance SPECIAL VALVE MVX-304 This is a special version of valve type MVX-303
More informationInstalling Cisco TelePresence MX200 G2 - Wheel Base
This installation guide covers MX200 G2 with a wheel base. Dimensions Height: 1480 mm / 58.3 in. Width: 995 mm / 39.2 in. Depth: 715 mm / 28.0 in. Weight total: 33 kg / 73 lb Weight monitor: 24 kg / 53
More informationProduct catalogue, pipe and sewer cleaning systems
Product catalogue, pipe and sewer cleaning systems Nozzles Rotorjet trolley Hose reels Cleaning devices www.hammelmann.com Contents (Navigation via Bookmarks) Rotorjet trolley Rotary joints, spray pipes
More informationEMH, Inc. Specifications for
EMH, Inc. Specifications for Top Running Cranes Under Running Cranes Wire Rope Hoists DISCLAIMER These SPECIFICATIONS ARE INTENDED AS GENERAL GUIDELINES ONLY for technical procedure. Questions concerning
More informationFeed systems. Effective handling
Feed systems Effective handling THE WAY TO MAKE IT OPTIMIZED The latest generation of automatic wire processing machines operates at high rates of acceleration and speed. This places maximum demands on
More informationOperator Training Questionnaire
Participants Name: Company Name: Score: Test Date: Location: Crane Operator's Permit Issued on Date: Instructor: 1. A Top Running Overhead Crane is any crane that runs on two parallel runway beams over
More informationService life of synthetic fibre ropes in deepwater lifting operations. The 15 th North Sea Offshore Cranes & Lifting Conference Ashley Nuttall
Service life of synthetic fibre ropes in deepwater lifting operations The 15 th North Sea Offshore Cranes & Lifting Conference Ashley Nuttall Fibre ropes for deepwater lifting Fibre ropes offer the following
More information2
10 MECHANICAL DRIVE SWING AWAY AUGER PARTS LIST SERIAL NOS. 70000-74773 1 2 # PART # DESCRIPTION 1 B198362 Boot Access Cover 2 B030500 Side Wind Jack 3 B003049 PTO Shaft - Constant Velocity 4 B027504 Boot
More informationPipe Cutting and Beveling Clamshells
Pipe Cutting and Beveling Clamshells Who We Are One Company, Total Support, Complete Solutions For more than a century, Hydratight has provided world-class bolted joint solutions and continues to set international
More information160 ATJ 180 ATJ. 16,25 m (160 ATJ) 17,65 m (180 ATJ) 9,10 m (160 ATJ) 10,60 m (180 ATJ)
160 ATJ 180 ATJ 160 ATJ 180 ATJ MANITOU, the world leader in materials handling, has the ability to accompany you on all types of terrain. The 160 and 180ATJ models have been developed to respond to all
More informationHose & Reel. Welding Reels. Arc Welding Gas Welding Cutting Operations
Hose & Reel P R O D U C T S Welding Reels Arc Welding Gas Welding Cutting Operations 2 Note to the designers & engineers. Welding Reels for Heavy Industry Hose & Reel Products hose reels for welding (Oxygen-acetylene
More informationZF W325 Vertical offset, direct mount marine transmission.
Marine Propulsion Systems Vertical offset, direct mount marine transmission. Maximum Input** Duty kw hp RPM Medium 507 680 2600 Continuous 430 577 2600 ** Must not be exceeded Description Robust design
More informationSTEWART GILL CONVEYORS Ltd
STEWART GILL CONVEYORS Ltd 550M STS SYSTEM overhead - inverted - side mounted - floor mounted - SPECIALISTS IN OVERHEAD CONVEYOR SYSTEMS 2 Index About 550M STS... 3 Track... 4 Track Supports... 5 Bends...
More informationSCAFFOLDING RUNWAY SYSTEM
SCAFFOLDING RUNWAY SYSTEM HANDBOOK 10/2009.2 i) Further information and detailed component information can be found in the C1 Conveyor Systems Brochure: http://www.nikoltd.co.uk/downloads/brochures/c1_overhead_conveyors_monorails.pdf
More informationRating when used as a weight carrying hitch without spring bars:
BOLT-TOGETHER WEIGHT DISTRIBUTING HITCH SYSTEM Rating when used as a weight distributing hitch with spring bars: Part Number 48051 4805 48053 48054 Max Tongue Weight 550 Ibs. 750 Ibs. 1000 Ibs. 1400 lbs.
More informationManual piston sampler...m 11
SAMPLING Manual piston sampler...m 11 Screw sampler...prec 22...PREC 100 Slide sampler...pr 55 Rotative screw sampler...prv Piston sampler...p 11 Sampler on belt conveyor...pba Rotating cup sampler...pgr
More informationRT 780. RT 780 80 USt Lifting Capacity Rough Terrain Cranes Datasheet Imperial. Features
USt Lifting Capacity Rough Terrain Cranes Datasheet Imperial Features Rated capacity: US t @ ft working radius Maximum boom length: 126 ft Maximum tip height: 1 ft CONTENTS Page: Key...3 Dimensions Crane
More informationHydraulically actuated clutches and spring-applied brakes clutch/brake combined units
왎 Hydraulically actuated clutches and spring-applied brakes clutch/brake combined units Or tlinghaus Plates. Clutches. Brakes. Systems. Hydraulically actuated clutches and spring-applied brakes clutch/brake
More informationEZ-Steer Assisted Steering System
EZ-Steer Assisted Steering System Installation Instructions Platform Kit P/N 53059-54 Case IH CVX 1135 CVX 1145 CVX 1155 CVX 1170 CVX 1190 CVX 1195 CVX 135 CVX 145 CVX 155 CVX 175 CVX 195 New Holland TVT
More informationRemote Head REMO ONE. Code 5750. Manual
Remote Head REMO ONE Code 5750 Manual by sachtler. All rights reserved Version: 1.2/09/05 Issue date: September 2005 Order no.: srh20t010a We want you to receive Sachtler products that are always state
More information1.1 DIMENSIONS AND WEIGHT PAG. 2 1.2 LOAD CENTRE FOR LIFTING PAG. 2 1.3 STORAGE CONDITIONS PAG. 2
TRANSPORT AND INSTALLATION. DIMENSIONS AND WEIGHT PAG.. LOAD CENTRE FOR LIFTING PAG..3 STORAGE CONDITIONS PAG. STARTING. INSTALLATION PAG.. SPACE REQUIREMENTS PAG. 3.3 ELECTRIC CONNECTION PAG. 3 3 DESCRIPTION
More informationIt's large enough to handle most welding job shop projects, yet small enough to make it a worth while home-workshop tool
It's large enough to handle most welding job shop projects, yet small enough to make it a worth while home-workshop tool H Craft Print Project No. 272 ERE'S a metal bender that will enable you to bend
More informationTABLE OF CONTENTS DT7K INSTRUCTION MANUAL TABLE OF CONTENTS 1-19-00E DT7K
TABLE OF CONTENTS DT7K INSTRUCTION MANUAL SECTION 100 DESCRIPTION & SPECIFICATIONS 17459 INSTALLATION DIMENSIONS - DT7K 17384 MOUNTING HOLE TEMPLATE S14930 INSTALLATION DRAWING - 14930 MOUNTING PEDESTAL
More informationDirective 2006/42/EC Classification of equipment used for lifting loads with lifting machinery
1(7) Classification of equipment used for lifting loads with lifting machinery December 2009 This classification was approved by the Machinery ing Group as a basis for a consistent application of the term
More informationArchitectural Specifications MODEL HDXL 9. 200 Fairview Road, Unit #2, Barrie, Ontario L4N 8Z8
MODEL HDXL 9 200 Fairview Road, Unit #2, Barrie, Ontario L4N 8Z8 Tel: 866-792-9968 or 705-792-9968 Fax: 705-735-9564 www.tnrdoors.com email: info@tnrdoors.com Model HDXL 9 Tech Specs September 4, 2012
More informationROV shackles. your reliable partner
ROV shackles your reliable partner Dear Customer, For over 90 years the production of high tensile shackles has been our core business and competence. The designs and quality standards of our wire rope-
More informationHydraulic Crawler Crane
Hydraulic Crawler Crane Model : BME800G Max. Lifting Capacity : 80 t x 3.6 m Max. Crane Length : 54.9 m BME800G CONTENTS 3 5 6 7 8 9 10 11 12 13 14 17 SPECIFICATIONS Power Plant Model: HINO P11C-VC Type:
More informationBPW TRANSPEC AIR LIGHT II SERIES AIR SUSPENSIONS SPARE PARTS CATALOGUE FOR AUSTRALIAN ASSEMBLED AXLES
BPW TRANSPEC AIR LIGHT II SERIES AIR SUSPENSIONS SPARE PARTS CATALOGUE FOR AUSTRALIAN ASSEMBLED AXLES TABLE OF CONTENTS 1992 CONTENTS PAGE BPW Air Suspension Series 3 Hangers 4 Trailing Arms and Attachments
More informationThomson Engineering Design Ltd Cable Handling Equipment
Thomson Engineering Design Ltd Cable Handling Equipment A Technical Guide to the Range of Cable Handling Equipment Available 2013 and an overview of our bespoke product development capability Copyright:
More informationInstallation information. METTLER TOLEDO MultiRange Floor scales / Pit scales
Installation information METTLER TOLEDO MultiRange Floor scales / Pit scales KC300/KCS300 KC600/KCS600 KD600/KD1500 KE1500/KE3000 KES1500/KES3000 KG3000/KG6000 KN1500 Floor scales / Pit scales Contents
More informationBolt-on castor set B
12/2010 Original Operating Instructions 999285502 en-gb Please retain for future reference Bolt-on castor set B rt. n 586168000 2008 models onward Basic drawings of product Product description The Bolt-on
More informationSlings, Rigging and Lifting Equipment
A printed or saved copy is an UNCONTROLLED copy. Check that it is the latest available version before use. Title: Number: SLINGS, RIGGING AND LIFTING EQUIPMENT GM-11-038-02 Version Number: 13.0 Date Revised:
More informationJABATAN KESELAMATAN DAN KESIHATAN PEKERJAAN MALAYSIA (JKKP)
APPENDIX 1 Department of Occupational Safety and Health JABATAN KESELAMATAN DAN KESIHATAN PEKERJAAN MALAYSIA (JKKP) DEPARTMENT OF OCCUPATIONAL SAFETY AND HEALTH, MALAYSIA (DOSH) Aras 2, 3 & 4 Blok D3,
More informationkrones PalCo Pallet conveyor
krones PalCo Pallet conveyor Raptec Gentle product für Füllmaschinen conveyance Reliable palletising and depalletising pay a crucial contribution to the function of the entire filling and packing line.
More informationLiftAlloy Chain Slings
CHAIN SLING BASICS Slings Lift-All chain slings meet or exceed all OSHA, ASME B30.9 and NACM standards and regulations. chain slings, available in 80 for 7/32" and 7/8"- /4" and 00 for 9/32"-3/4", are
More informationMOVING YOU FURTHER HYUNDAI HEAVY INDUSTRIES
Electric Counterbalance Trucks MOVING YOU FURTHER HYUNDAI HEAVY INDUSTRIES Your satisfaction is our priority! Hyundai introduces a new line of 9-series battery forklift trucks. The newly designed 4 wheel
More informationBoom and fly capacities for this machine are listed by the following sections:
Lifting Capacities Telescopic Hydraulic Truck Crane HTC 8650 50 ton (45.36 metric ton) and fly capacities for this machine are listed by the following sections: Fully Extended Outriggers Working Range
More informationWire rope slings, the hazards surrounding
Recommended loads for wire rope slings Wire rope slings, the hazards surrounding their use, and safety measures or alternatives to avoid injury will be covered in this data sheet. 2. Wire rope made from
More informationRINGFEDER. Automatic Hook Couplings for Road and Cross Country Vehicles. TYPE RUwg. Prospect
RINGFEDER E 07 00 Prospect Automatic Hook Couplings for Road and Cross Country Vehicles TYPE RUwg Automatic Hook Couplings Types RUwg K O D, K 1 D, K 2 D, K 3 D, K 4 D for towing eye according to VG 74059
More information