TB VA CTRL-XFRMR
|
|
|
- Erik Sherman
- 7 years ago
- Views:
Transcription
1 3804 South Street , TX Nacogdoches Phone: Fax: TB VA CTRL-XFRMR Acme Electric Catalog Number TB81322 Manufacturer Acme Electric Description Industrial Control Transformer, Primary Voltage 208/240/277/380/480 V; Secondary Voltage 24 V; 0/60 HZ; Power Rating 7 Va; Insulation Class 130; Temperature Rise 80 Deg C; 0.22 Inch L X 0. Inch W Slot Mounting Weight per unit.0 (lbs/each) Product Category Core & Coil Industrial Control Applicable Standard ANSI, NEMA, OSHA Approval UL, CSA Brand ACME ELECTRIC Commodity Description CORE & COIL INDUSTRIAL CONTROL TRANSFORMERS Frequency Rating 0/60 HZ Insulation Class 130 Long Description INDUSTRIAL CONTROL TRANSFORMER, PRIMARY VOLTAGE 208/240/277/3 V; SECONDARY VOLTAGE 24 V; 0/60 HZ; POWER RATING 7 VA; INSULATION CLASS 130; TEMPERATURE RISE 80 DEG C; 0.22 INCH L X 0. INCH W SLOT MOUNTING Manufacturers Part Number TB81322 Mounting 0.22 INCH L X 0. INCH W SLOT Power Rating 7 VA Power Rating in VA 7 Primary Voltage 208/240/277/380/480 V Product Type Control Transformer Secondary Voltage 24 V Size 3.7 INCH W X 4.31 INCH D X 3.4 INCH H Temperature Rise 80 DEG C
2 TA TB SERIES OPEN CORE & COIL INDUSTRIAL CONTROL TRANSFORMERS TB Series Open Core & Coil Industrial Control Transformers Acme s TB Series Industrial Control Transformers are especially designed to accommodate the momentary current inrush caused when electromagnetic components are energized... without sacrificing secondary voltage stability beyond practical limits. Acme s TB Series transformers are dry-type, step-down transformers with the secondary control circuit isolated from the primary line circuit to assure maximum safety. Voltage regulation of Acme s TB Series transformers exceeds standards recommended by the National Electrical Manufacturers Association. Secondary circuit voltage drop between no-load and momentary overload remains exceptionally low. This excellent secondary circuit voltage regulation assures reliable operation of electromagnetic components and may permit the use of a smaller and less expensive industrial control transformer. FEATURES & BENEFITS 600 volt class and below VA, 0/60 Hz. 80 C temperature rise, 130 C insulation class. Constructed with high quality silicon steel lamination to minimize core losses and increase efficiency. Designs incorporate precision split bobbin wound coils for improved regulation. Primary fuse blocks and secondary fuse kits available and easily adaptable. Series-parallel connecting links save wiring and labor costs. Terminal blocks allow full access for ring terminals for easy installation even with solid strand conductors. Integrally molded terminal blocks with isolation barriers to prevent arc over. Footprint matches TA Series for easy interchangeability. Copper windings on all groups. Heavy gauge steel mounting plate adapts to various mounting dimensions. Voltage regulation exceeds NEMA requirements. UL Listed and CSA Certified. Meets or exceeds UL, CSA, NEMA, ANSI and OSHA Standards. Ten-year limited warranty. APPLICATIONS Motor Starters Contactors Solenoids Timer Circuits Relays Control Panels Robotics 6 ACME ELECTRIC MILWAUKEE, WI acmetransformer.com
3 TB Series Primary Fuse Kits TA TB SERIES OPEN CORE & COIL INDUSTRIAL CONTROL TRANSFORMERS Type PL Through PL11270: Using 2 Class CC Dual Element Fuses (not supplied) Meets NEC Article 40 and UL-08 requirements. For use with class CC fuses. Eliminates remote mounting of primary overcurrent protection. Covered by Acme Electric 10-year limited warranty. Field installation is fast and easy. Simply loosen the mounting hardware (Fig. 1), slide the bracket over the transformer and re-tighten the mounting hardware. Make the proper connections with the factory furnished jumpers (Fig. 2) and your unit is ready for operation. Figure 1 Fuse Kit adds approximately 1.7 to height of unit. Figure 2 Primary Fuse Sizing Chart VA 120 V 208 V 230 V 240 V 277 V 380 V 416 V 440 V 460 V 480 V 0 V 600 V Secondary Fuse Sizing Chart VA 24 V 8 V 91 V 99 V 100 V 110 V 11 V 120 V 12 V 130 V 0 VA VA VA VA VA VA VA VA VA VA VA VA VA VA Fuse size based on time delay class CC fuses. NOTE: Bold lines indicate changes in the percent of rated current used to calculate fuse sizes in accordance with article 40 of the NEC. ACME ELECTRIC MILWAUKEE, WI acmetransformer.com 7
4 TA TB SERIES OPEN CORE & COIL INDUSTRIAL CONTROL TRANSFORMERS TB Series Secondary Fuse Kits Type PL79924, PL79930, & PL79931: Use Dual Element Slow-Blow Fuse Catalog Number VA Type PL /4" x 1-1/4" PL /32" x 1-1/2" PL /32" x 1-1/2" Secondary Fuse Kit Mount secondary fuse clips on terminals X1 and F or F1 using the screws supplied with the transformer. Connect secondary load lines to terminals X2 and F or F2. Use Jumper Link to connect F1 and F2. Use dual-element slow-blowing fuses such as Bussmann MFG., Fusetron Type FNM, Littelfuse or Ferraz Shawmut (not supplied with fuse kits). PL79924: Use fuse kit on all transformers except 70 & 1000 VA with 24 volt secondary. Instructions for TB Series Secondary Fuse Kit Type PL112603: use dual element slow-blow fuse 13/32" x 1-1/2" (1.0 x 3.8 cm) 1. To attach secondary fuse kit PL to primary fuse kits PL thru PL11270 snap the secondary single pole fuse block onto the unlabeled side of the primary double pole fuse block. (See Figure 1) 2. Install the fuse kits as instructed under the primary fuse kit instructions on page Select the appropriate pair of jumpers for making the connections between the secondary fuse block and the secondary (X-side) of the transformer. 4. Connect the female quick-connect of the jumpers supplied to one of the male quickconnects of the secondary fuse block one jumper to each end of the fuse block. (See Figure 2). Connect the ring terminal of the jumpers supplied to screw terminals X1 and F or F1 on the secondary (X-side) of the transformer. 6. Connect secondary load lines to terminals X2 and F or F2. Figure 2 Figure 1 8 ACME ELECTRIC MILWAUKEE, WI acmetransformer.com
5 TA & SERIES TB SERIES OPEN OPEN CORE CORE & COIL & COIL INDUSTRIAL CONTROL TRANSFORMERS SELECTION CHARTS GROUP A 120 X 240 PRIMARY VOLTS 12/24 SECONDARY VOLTS 1Ø, 0/60 Hz CATALOG VA OUTPUT APPROX. DIMENSIONS APPROX. PRIMARY SECONDARY NO. RATING AMPS Inches (Cm.) SHIP WEIGHT FUSE BLOCK FUSE SIZE A B C D E F Lbs. (Kg.) PART NO. 24 VOLTS TB x.0 4 PL / (10.7) (7.6) (6.8) (6.4) (.4) (0.6 x 1.3) (1.8) TB x.0 4 PL amps (12.0) (7.6) (6.8) (6.4) (6.6) (0.6 x 1.3) (1.8) TB x.0 4 PL / 4 amps (12.4) (7.6) (6.8) (6.4) (7.1) (0.6 x 1.3) (1.8) TB x.0 6 PL (12.1) (9.) (8.6) (8.0) (6.7) (0.6 x 1.3) (2.7) TB x.0 9 PL amps (12.9) (11.4) (9.8) (9.) (7.7) (0.6 x 1.3) (4.1) TB x.0 13 PL amps (1.) (11.4) (9.8) (9.) (10.3) (0.6 x 1.3) (.9) TB x.0 16 PL amps (1.0) (13.3) (11.4) (11.1) (10.6) (0.8 x 1.3) (7.3) TB x.0 24 PL (19.1) (13.3) (11.4) (11.1) (13.3) (0.8 x 1.3) (10.9) TB x.0 26 PL11270 (18.9) (17.1) (14.) (14.6) (9.7) (0.8 x 1.3) (11.8) GROUP B 240 X 480, 230 X 460, 220 X 440 PRIMARY VOLTS 120/11/110 SECONDARY VOLTS 1Ø, 0/60 Hz NO. RATING AMPS INCHES (CM.) SHIP WEIGHT FUSE BLOCK FUSE KIT FUSE 120V A B C D E F LBS. (KG.) PART NO. PART NO. 120 VOLTS TB x.0 4 PL (10.7) (7.6) (6.8) (6.4) (.4) (0.6 x 1.3) (1.8) TB x.0 4 PL (12.0) (7.6) (6.8) (6.4) (6.6) (0.6 x 1.3) (1.8) TB x.0 4 PL (12.4) (7.6) (6.8) (6.4) (7.1) (0.6 x 1.3) (1.8) TB x.0 6 PL (12.7) (9.) (8.6) (8.0) (7.1) (0.6 x 1.3) (2.7) TB x.0 9 PL (10.6) (11.4) (9.8) (9.) (8.0) (0.6 x 1.3) (4.1) TB x.0 10 PL (14.1) (11.4) (9.8) (9.) (8.0) (0.6 x 1.3) (4.) TB x.0 12 PL (16.1) (11.4) (9.8) (9.) (9.7) (0.6 x 1.3) (.4) TB x.0 1 PL (16.0) (13.3) (11.4) (10.3) (9.7) (0.6 x 1.3) (6.8) TB x.0 23 PL (16.9) (13.3) (11.4) (11.1) (13.0) (0.8 x 1.3) (10.4) TB x.0 2 PL11270 (19.3) (17.1) (14.7) (14.6) (9.4) (0.8 x 1.3) (11.3) 6 /10 amp 1 amp 1 1 /4 amps 2 amps 3 2 / 4 amps 4 1 /2 amps 6 1 /4 amps 12 amps Secondary Fuse Kit PL may be substituted for PL thru PL when Primary Fuse Kit is used. See page 8. See chart for integrally mounted fuse block catalog number suffix. ACME ELECTRIC MILWAUKEE, WI acmetransformer.com 9
6 TA & SERIES TB SERIES OPEN OPEN CORE CORE & COIL & COIL INDUSTRIAL CONTROL TRANSFORMERS GROUP B (CONTINUED) 240 X 480, 230 X 460, 220 X 440 PRIMARY VOLTS 120/11/110 SECONDARY VOLTS 1Ø, 0/60 Hz NO. RATING AMPS INCHES (CM.) SHIP WEIGHT FUSE BLOCK FUSE KIT FUSE 120V A B C D E F LBS. (KG.) PART NO. PART NO. 120 VOLTS TA x.0 43 PL11270 PL amps (22.4) (17.1) (14.) (14.6) (14.6) (0.8 x 1.3) (19.) TA x.0 49 PL11270 PL amps (23.) (17.1) (14.) (14.6) (16.2) (0.8 x 1.3) (22.2) TA x PL (22.4) (19.1) (21.2) (16.) (19.1) (1.0 x 2.1) (31.8) TA x PL (19.1) (30.3) (24.1) (17.1) (1.9) (1.0 x 2.1) (6.7) See fusing chart for secondary fuse kits. Integrally Mounted Fuse Blocks Available: (See Chart) GROUP A THROUGH 00 VA GROUP B THROUGH 2000 VA ADD SUFFIX TO CATALOG NO. F2 F3 F4 Consult factory for other sizes available. CONFIGURATION Factory installed integrally mounted 2-pole primary block Factory installed integrally mounted 3-pole primary and secondary block (100 VA & larger) Factory installed 2-pole primary block and secondary fuse clips (0 & 7 VA) GROUP C 240/480/600, 230/460/7, 220/440/0 PRIMARY VOLTS 120/100, 11/9, 110/90 SECONDARY VOLTS 1Ø, 0/60 Hz NO. RATING AMPS INCHES (CM.) SHIP WEIGHT FUSE BLOCK FUSE KIT FUSE 120V A B C D E F LBS. (KG.) PART NO. PART NO. 120 VOLTS TB x.0 4 PL (11.6) (7.6) (6.8) (6.4) (6.6) (0.6 x 1.3) (1.8) TB x.0 4 PL (12.4) (7.6) (6.8) (6.4) (7.1) (0.6 x 1.3) (1.8) TB x.0 PL (13.6) (7.6) (6.8) (6.4) (8.3) (0.6 x 1.3) (2.3) TB x.0 7 PL (12.7) (9.) (8.6) (8.0) (7.8) (0.6 x 1.3) (3.2) TB x.0 11 PL (14.1) (11.4) (9.8) (9.) (8.9) (0.6 x 1.3) (.0) TB x.0 1 PL (16.) (11.8) (10.) (10.3) (10.3) (0.6 x 1.3) (6.8) TB x.0 1 PL (16.) (11.8) (10.) (10.3) (10.3) (0.6 x 1.3) (6.8) TB x.0 21 PL (16.3) (13.3) (11.4) (11.1) (11.6) (0.8 x 1.3) (9.) TB x.0 2 PL11270 (18.3) (17.1) (14.7) (14.6) (9.7) (0.8 x 1.3) (11.3) TB x.0 32 PL11270 (20.2) (17.1) (14.7) (14.6) (11.8) (0.8 x 1.3) (14.) See fusing chart for secondary fuse kits. 6 /10 amp 1 amp 1 1 /4 amps 2 amps 3 2 / 4 amps 4 1 /2 amps 6 1 /4 amps 12 amps TA x.0 47 PL11270 PL amps (24.0) (17.1) (14.) (14.6) (16.2) (0.8 x 1.3) (21.3) TA x.81 PL PL amps (20.1) (19.1) (19.) (16.) (16.7) (1.0 x 2.1) (24.9) TA x.81 7 PL (17.8) (30.3) (22.4) (17.1) (14.6) (1.0 x 2.1) (34.0) TA x PL (19.1) (30.3) (24.1) (17.1) (1.9) (1.0 x 2.1) (49.9) Secondary Fuse Kit PL may be substituted for PL thru PL when Primary Fuse Kit is used. See page 8. See chart for integrally mounted fuse block catalog number suffix. 60 ACME ELECTRIC MILWAUKEE, WI acmetransformer.com
7 TA & SERIES TB SERIES OPEN OPEN CORE CORE & COIL & COIL INDUSTRIAL CONTROL TRANSFORMERS GROUP D 208/240/277/380/480 PRIMARY VOLTS 24 SECONDARY VOLTS 1Ø, 0/60 Hz NO. RATING AMPS INCHES (CM.) SHIP WEIGHT FUSE BLOCK FUSE KIT FUSE SIZE A B C D E F LBS. (KG.) PART NO. PART NO. 24 VOLTS TB x.0 4 PL (10.4) (9.) (8.6) (8.0) (.6) (0.6 x 1.3) (1.8) TB x.0 PL (10.9) (9.) (8.6) (8.0) (.9) (0.6 x 1.3) (2.3) TB x.0 PL (11.) (9.) (8.6) (8.0) (6.7) (0.6 x 1.3) (2.3) TB x.0 9 PL (12.1) (11.4) (9.8) (9.) (7.7) (0.6 x 1.3) (4.1) TB x.0 11 PL (13.3) (11.8) (10.) (10.3) (8.3) (0.6 x 1.3) (.0) TB x.0 18 PL (1.3) (13.3) (11.4) (11.1) (10.2) (0.8 x 1.3) (8.2) TB x.0 19 PL (16.) (13.3) (11.4) (11.1) (10.6) (0.8 x 1.3) (8.6) See fusing chart for secondary fuse kits. 3 2 /10 amp amps 6 1 /4 amps 1 amps 20 amps 30 amps TB x.0 26 PL11270 (18.0) (17.1) (14.7) (14.6) (9.7) (0.8 x 1.3) (11.8) 33 amps TB x.0 33 PL11270 (20.6) (17.1) (14.) (14.6) (11.8) (0.8 x 1.3) (1.0) GROUP E 208/277/380 PRIMARY VOLTS 11/9 SECONDARY VOLTS 1Ø, 0/60 Hz NO. RATING AMPS INCHES (CM.) SHIP WEIGHT FUSE BLOCK FUSE KIT FUSE 11V A B C D E F LBS. (KG.) PART NO. PART NO. 11 VOLTS TB x.0 4 PL (11.0) (7.6) (6.8) (6.4) (6.6) (0.6 x 1.3) (1.8) TB x.0 4 PL (12.0) (7.6) (6.8) (6.4) (7.1) (0.6 x 1.3) (1.8) TB x.0 PL (11.3) (9.) (8.6) (8.0) (6.2) (0.6 x 1.3) (2.3) TB x.0 PL (12.7) (9.) (9.8) (8.0) (7.8) (0.6 x 1.3) (2.3) TB x.0 13 PL (14.4) (11.4) (9.8) (9.) (10.3) (0.6 x 1.3) (.9) TB x.0 18 PL (16.0) (11.8) (10.) (10.3) (12.1) (0.6 x 1.3) (8.2) TB x.0 20 PL (1.8) (13.3) (11.4) (11.1) (11.6) (0.6 x 1.3) (9.1) TB x.0 24 PL11270 (17.3) (17.1) (14.7) (14.6) (9.4) (0.8 x 1.3) (10.9) TB x.0 31 PL11270 (20.2) (17.1) (14.) (14.6) (11.3) (0.8 x 1.3) (14.1) See fusing chart for secondary fuse kits. 6 /10 amp 1 amp 1 1 /4 amps 2 amps 3 1 /2 amps amps 7 amps 12 amps Secondary Fuse Kit PL may be substituted for PL thru PL when Primary Fuse Kit is used. See page 8. See chart for integrally mounted fuse block catalog number suffix. ACME ELECTRIC MILWAUKEE, WI acmetransformer.com 61
Industrial Control Power Transformers
Class MT Features Epoxy-encapsulated (50 5000); Completely seals the transformer coils against moisture, dust, dirt and industrial contaminants for maximum protection in hostile and industrial environments
HPS Universal. Single and Three Phase Potted. Buck-Boost Transformers. Buck-Boost Applications & Standard Specification... 80
Buck-Boost Transformers Single and Three Phase Potted Buck-Boost Transformers Buck-Boost Applications & Standard Specification... 80 Selecting Buck-Boost Transformers... 81 Single Phase Selection Tables...
SUBJECT: How to wire a motor starter Number: AN-MC-004 Date Issued: 2/08/2005 Revision: Original
SUBJECT: How to wire a motor starter Number: AN-MC-004 Date Issued: 2/08/2005 Revision: Original A motor starter is a combination of devices to allow an induction motor to start, run and stop according
Bussmann. All-In-One Module. Bussmann Power Module Switch. How to configure Part Numbers: Step 1: Select Switch Amperage 1
How to configure Part Numbers: Step : Select Switch Amperage Power Module Switch Rating (Amps) Power Module Switch Catalog No. 30 3 60 6 00 200 2 400 4 Step 2: Select Options Needed 5 Bussmann Power Module
Circuit Breakers. NRC Series. NRC Series. 900 www.idec.com
Switches & Pilot Lights Display Lights NRC series circuit breakers offer circuit protection which is far superior to using fuses in applications containing relay circuits, motor circuits, heater circuits,
3) What is the difference between "Insulating", "Isolating", and "Shielded Winding" transformers?
Tyco Electronics Corporation Crompton Instruments 1610 Cobb International Parkway, Unit #4 Kennesaw, GA 30152 Tel. 770-425-8903 Fax. 770-423-7194 1) What is a transformer and how does it work? A transformer
PROPER SELECTION OF CONTROL CIRCUIT TRANSFORMERS WHITE PAPER BULLETIN 1497, 1497A, AND 1497B
WHITE PAPER PROPER SELECTION OF CONTROL CIRCUIT TRANSFORMERS BULLETIN 1497, 1497A, AND 1497B CONTROL CIRCUIT TRANSFORMERS The proper selection of the control circuit transformers is important for suitable
CompactLogix Power Supplies Specifications
Technical Data CompactLogix Power Supplies Specifications 1768 CompactLogix Power Supplies Catalog Numbers 1768-PA3, 1768-PB3 1769 Compact I/O Power Supplies Catalog Numbers 1769-PA2, 1769-PB2, 1769-PA4,
Buck - Boost Transformers
Buck - Boost Transformers Contents Buck - Boost Transformers - Terms & Definitions... 48 Buck - Boost Transformers - Sizing... 50 Quick Reference Chart - 08, 0, 40 Volts Single & Three Phase... 5 Single
MCR1900 Media Converter 19-Slot Chassis
MCR1900 Media Converter 19-Slot Chassis Installation Guide Part #5500304-11 Copyright Statement This document must not be reproduced in any way whatsoever, either printed or electronically, without the
Transformer Questions & Answers
Transformer Questions & Answers. What is a transformer and how does it work? A transformer is an electrical apparatus designed to convert alternating current from one voltage to another. It can be designed
SUGGESTED SPECIFICATION for Series 185 Service Entrance Rated Automatic Transfer Switches
SUGGESTED SPECIFICATION for Series 185 Service Entrance Rated Automatic Transfer Switches PART 1 GENERAL 1.01 Scope Optional Standby Power Generator Systems A. Furnish and install automatic transfer switches
Distribution Dry Type Transformers
8 TRASFORMERS Distribution Dry Type Transformers Table (Contact Sales office for List Price) (commonly used) 1a. 115 C Rise F 1b. 80 C Rise B 4. Wall Brackets1 W 6. Low noise XdB below std. LX Type bg
DORMA MODEL PS-406BB POWER SUPPLY INSTALLATION INSTRUCTIONS
Features: INSTALLATION Install in accordance with NFPA 70. DORMA MODEL PS-406BB POWER SUPPLY INSTALLATION INSTRUCTIONS Up to 1.95 Amps Load Capacity Class 2 Rated Outputs Overload, Over Voltage, and Short
I nstallation. M100Q Series Proportional Actuator with R81Q Controller Board for Thermistor Sensor Applications. Tools Needed.
FANs 268.1, 1628.3 Installation Bulletin M100Q Issue Date 1099 M100Q Series Proportional Actuator with R81Q Controller Board for Thermistor Sensor Applications I nstallation Parts Included M110QGA-1 and
Pump Specifications 250 Series Submersible Sump / Effluent Pump 2 Solids handling
Pump Specifications 250 Series Submersible Sump / Effluent Pump 2 Solids handling 250_P1 R10/7/2015 Copyright 2015 Liberty Pumps Inc. All rights reserved. Specifications subject to change without notice.
Service Facts. WARNING: HAZARDOUS VOLTAGE - DISCONNECT POWER and DISCHARGE 4TTM3-SF-1. Split System Cooling 4TTM3018-4TTM3060
4TTM3-SF-1 Service Facts Split System Cooling 4TTM3018-4TTM3060! CAUTION UNIT CONTAINS R-410A REFRIGERANT! R-410A OPERATING PRESSURE EXCEEDS THE LIMIT OF R-22. PROPER SERVICE EQUIPMENT IS REQUIRED. FAILURE
Explosion-Proof Electric Unit Heaters
Type FX4 FX4 Explosion-Proof Electric Air Heaters FX4 heaters are UL listed and/or CSA certified for use in hazardous locations. They are designed for dry indoor industrial applications such as oil refineries,
Outdoor 33.6W Dual Port Passive Power-over-Ethernet Midspan For External Security Cameras and Wireless Access Points
Outdoor 33.6W Dual Port Passive Power-over-Ethernet Midspan For External Security Cameras and Wireless Access Points Features SELV Compliant No Detection Passive Injector Gigabit Compatible Full Protection
CAT ATC POWER BREAKER & POWER CASE SWITCH AUTOMATIC TRANSFER SWITCH
CAT ATC POWER BREAKER & POWER CASE SWITCH AUTOMATIC TRANSFER SWITCH Cat transfer switches are designed for a variety of standby power applications. They provide flexibility, reliability and value in a
Current Transformers
Supersedes December 2002 General Description Eaton s low voltage current transformers are available in both solid core and split core designs. Engineered for electronic metering applications, all solid
SECTION 26 09 26 LOW VOLTAGE LIGHTING CONTROLS
SECTION 26 09 26 LOW VOLTAGE LIGHTING CONTROLS PART 1 - GENERAL 1.01 RELATED DOCUMENTS: A. The Conditions of the Contract and applicable requirements of Division 1, "General Requirements", and Section
Bulletin 150 Smart Motor Controllers SMC-3 Smart Motor Controller
Overview/Modes of Operation Bulletin 150 Smart Motor Controller The SMC-3 is a compact, simple to use, solid-state motor controller designed to operate 3-phase motors. It features a built-in overload relay
SmartVFD Frame 4 Wiring Diagrams and Dimensional Drawings
Smart Frame Wiring Diagrams and Dimensional Drawings Smart Frame Size 60 Vac:.5-7.5 HP 08/0 Vac: 0.75- HP SPECIFICATION DATA CONTENTS Smart Frame Wiring Diagrams... Frame, Fused Disconnect Wiring Diagrams...
Manual motor starter MS116
Data sheet Manual motor starter MS116 Manual motor starters are electromechanical devices for motor and circuit protection. These devices offer local motor disconnect means, manual ON/ OFF control, and
Distribution Dry Type Transformers
Distribution Dry Type s Sentron Power Centers Bolt-in Breaker Option The same economical space saving package, NEMA 3R rated enclosure, and UL listed transformer of the original Sentron Power Center but
Catalog January. Heavy industrial power applications Motor contactors and starters
Catalog January Heavy industrial power applications Motor contactors and starters 2006 General contents 0 Heavy Industrial Power Applications Motor Contactors and Starters 1 Contactors and Starters, Type
Low Voltage Fuses For Motor Protection
Code Requirements The NEC or CEC requires that motor branch circuits be protected against overloads and short circuits. Overload protection may be provided by fuses, overload relays or motor thermal protectors.
PRODUCT GUIDE. SL Medium Voltage IEC Vacuum Contactors
PRODUCT GUIDE SL Medium Voltage IEC Vacuum Contactors Table of Contents 1 Overview Introduction....................................................2 Features........................................................2
HP UPS R1500 Generation 3
HP UPS R1500 Generation 3 Installation Instructions Part Number 650952-001 NOTE: The rating label on the device provides the class (A or B) of the equipment. Class B devices have a Federal Communications
INSTALLATION GUIDE. Card Reader & Controller with KIM Swipe Reader for Solitaire 850 / 950 / 850L Learnlok PK2930
INSTALLATION GUIDE Card Reader & Controller with KIM Swipe Reader for Solitaire 850 / 950 / 850L Learnlok PK2930 Card Reader and Controller Model 3.5 with KIM Swipe Reader Table of Contents 1. Features..................................
Bimetallic Overload Relay Specifications
Technical Data Bimetallic Overload Relay Specifications Bulletin Number 193K, 193T1 Topic Page Product Overview 2 Standards compliance and Certifications 2 General Specifications 193K 3 Approximate Dimensions
Power Supplies 3. SDN-P DIN Rail Series
SDN-P DIN Rail Series The SDN DIN Rail power supplies provide industry leading performance. Sag Immunity, transient suppression and noise tolerant, the SDN series ensures compatibility in demanding applications.
Operation and Installation Manual
Operation and Installation Manual RCM-10 Remote Control Monitor and RSM-10 Remote Status Monitor for the CNA-100 & CNA-200 Automations Revision 1.1 9/98 WARRANTY INFORMATION The RCM-10 Remote Control
Chromalox. Installation, Operation. Portable Industrial Unit Blower Air Heater Type DRA RENEWAL PARTS IDENTIFICATION
Chromalox Installation, Operation RENEWAL PARTS IDENTIFICATION Portable Industrial Unit Blower Air Type DRA and DIVISION SALES REFERENCE DATE SECTION (Supersedes P-) PF-) NOVEMBER, 00 DRA PF- -0-00 Specifications
Low Voltage Transformers Sealed, General Purpose, Dry Type
Low Voltage Transformers Sealed, General Purpose, Dry Type Catalog 7400CT9601R4/08 08 Class 7400 CONTENTS Description..............................................Page Introduction.................................................
TECHNICAL SUPPORT MANUAL 3 Phase Air Conditioner Component R2A3**GHR
3 Phase Air Conditioner Component R2A3**GHR DANGER, WARNING, CAUTION, and NOTE The signal words DANGER, WARNING, CAU- TION, and NOTE are used to identify levels of hazard seriousness. The signal word DANGER
33.6W Power over Ethernet Waterproof Adapter PoE Plus Single Port Injector for Outdoor Application
33.6W Power over Ethernet Waterproof Adapter PoE Plus Single Port Injector for Outdoor Application Features Compliant with the IEEE802.3at Standard -40 to +60 C Temperature Range Diagnostic LEDs Full Protection
MTE SERIES RLW. World REACTORS USER MANUAL PART NO. INSTR 030 REL. 090930. 2009 MTE Corporation
MTE SERIES RLW World REACTORS USER MANUAL PART NO. INSTR 030 REL. 090930 2009 MTE Corporation IMPORTANT USER INFORMATION NOTICE MTE Series RLW reactors are components designed to improve the reliability
GENERATOR START CONTROL MODULE - MINI (2 Wire to 3 Wire)
FEATURES & APPLICATIONS Inexpensive 2 wire to 3 wire start controller for electric start high speed gas generators. Optimized for use with Outback Invertors. Supports three types of 3 wire generator control
IRRIGATION PUMPING Table of Contents - Section 900
IRRIGATION PUMPING Table of Contents - Section 900 PARAGRAPH 900.1 GENERAL 1 900.2 METERING REQUIREMENTS 1 900.3 CUSTOMER S CONTROL EQUIPMENT 2 900.4 SERVICE CONDUCTOR REQUIREMENTS 2 900.5 RECOMMENDATIONS
Mini Motor Contactor J7KNA Main contactor Accessories Approved Standards Standard Guide No (US,C) Ordering Information tage Model Number Legend gear
Mini Motor Contactor J7KNA ) Main contactor AC & DC operated Integrated auxiliary contacts Screw fixing and snap fitting (35 mm DIN-rail) Range from 4 to 5.5 (AC 3, 380/415V) 4 -main pole version (4 AC
CONNECTOR AMPLIFIER FOR PROPORTIONAL VALVES (4-20 ma Input Version)
TECHNICAL DATASHEET #TD1102AX CONNECTOR AMPLIFIER FOR PROPORTIONAL VALVES (4-20 ma Input Version) Part Number: Connector Amplifier CAPV-H-4-20MA-x complete with cable CAPV-4C-yM Where: x = current output
12S, 14S, 15S Series. Time Delay Relays and Sequencers. Time Delay Relays and Sequencers. Features and Benefits. Switch Actions and Configurations
12S, 14S, 15S Series Time Delay Relays and Sequencers Time Delay Relays and Sequencers The Therm-O-Disc type 12S, 14S and 15S series time delay relays and sequencers are field-proven devices for controlling
How To Protect A Motor From Overcurrent
Phase ailure elays Type PS and PD Class 8430 Catalog 04 CONTENTS Description.....................................................Page Product Description and Definitions......................................
Variable Transformers Product Design & Engineering Data
Variable Transformers Product Design & Engineering Data Product Design & Engineering Data Type 1010B Cutaway General Information STACO ENERGY PRODUCTS CO. is a leading manufacturer of variable transformers,
Product Guide AC Voltage Control Devices. Guide Guide. Popular Variable Transformers and AC Power Supplies. www.stacoenergy.com
Popular Variable Transformers and AC Power Supplies Product Guide AC Voltage Control Devices Guide Guide Your Tailored Power Solutions Provider TM Staco Energy Products Co. has been a leading manufacturer
Industrial Control Transformers
Industrial Control Transformers Sizing...158 Selection Chart...159 SBE 55 C ise, Copper, Encapsulated, 50 VA - 1000 VA... 161 5 SBE Accessories... 165 SBE 55 C ise, Copper Open Style, 1500 VA - 5000 VA...
Type: DILM115(RAC240) Article No.: 239548 Sales text Contactor,55kW/400V,AC operated. Ordering information
Type: DILM115(RAC240) Article No.: 239548 Sales text Contactor,55kW/400V,AC operated Ordering information Connection technique Description Description Rated operational current Screw terminals 3 pole AC
6 Buck Boost Transformers
6 uck oost Transformers uck-oost transformers are small, single phase, dry type distribution transformers designed and shipped as insulating/isolating transformers. They have a dual voltage primary and
Owner's/Installation Manual
Owner's/Installation Manual Power Management Module (PMM) and Starter Kit NOTE: The starter kit must be purchased and installed prior to individual PMM usage. Model Numbers: 00686-0 PMM 00699-0 PMM WITH
Electronic overload relay EF19 and EF45
Data sheet Electronic overload relay EF19 and EF45 Electronic overload relays offer reliable protection in case of overload and phase-failure. They are the alternative to thermal overload relays. Motor
Solid State Timers Type F
Solid State Timers Type F Class 9050 CATALOG CONTENTS Description.....................................................Page Product Descriptions............................................. 3 Application
CURRENT TRANSFORMER MODEL 546 UL1015 #16 AWG LEAD WIRE, STANDARD LENGTH IS 24" 1 X
CURRENT TRANSFORMER MODEL 546 1.10" I.D. PAGE No 1-38 REV 15DEC00 TERMINAL OPTION LEAD WIRE OPTION 1.10 0 1.20 2.55 3.00 3.47 0.18 x 0.31 SLOT ( 2 PLACES) 8-32 BRASS STUD (2 PLACES) UL1015 #16 AWG LEAD
Centro-Matic Automatic Lubrication Systems System Controls
Selecting the right controls for your automated lubrication system is one of the last steps in the design process. Several different models may be chosen to control power-operated pumps, depending on the
Draper Low Voltage, Remote Control, Serial and Network Wiring Guide
Draper Low Voltage, Remote Control, Serial and Network Wiring Guide Copyright 2007 Draper Inc. Form LV-RC-Serial-Network_Wiring07 Print ed in U.S.A. Draper Low Voltage, Remote Control, Serial and Network
25-kV Apparatus Bushings B Series (bolt-in) for Elbow to Air-Insulated Service 200 Amp, 600 Amp and 1250 Amp
Page 1 2015 Grounded Metal Equipment Plate Equipment Connection Bus Bar or Other Component 15 kv or 25 kv Separable Insulated Connector (elbow) Equipment Connection Power Cable Power Cable Grounded Metal
SECTION 4 ELECTRIC MOTORS UNIT 17: TYPES OF ELECTRIC MOTORS
SECTION 4 ELECTRIC MOTORS UNIT 17: TYPES OF ELECTRIC MOTORS UNIT OBJECTIVES After studying this unit, the reader should be able to Describe the different types of open single-phase motors used to drive
Mini Power-Zone Unit Substation
Catalog 7440CT0901 2009 Class 7440 CONTENTS Description............................................. Page Product Description...........................................2 General Information...........................................3
General Purpose Relays Types K, R, N, and C
General Purpose Relays s K, R, N, and C Catalog 0CT00R/0 00 Class 0 CONTENTS Description............................................. Page R Miniature Plug-in Relays.............................. K Plug-in
All work must conform to the National Electric Code, latest edition, and all other applicable codes and regulations.
DIVISION 16 ELECTRICAL SECTION 16100 - ELECTRICAL PART 1 - GENERAL SCOPE All electrical work as shown on the drawings and as necessary to provide a complete electrical system. Include primary service,
ACME ELECTRIC CORPORATION PDPD-01
4815 West Fifth Street Lumberton, NC 28358 (910) 738-1121 Inside NC (800) 334-5214 Outside NC (910) 739-0024 Fax www.acmepowerdist.com ACME ELECTRIC CORPORATION PDPD-01 ATD-101-1001 Revised-02/ 06 Printed
PS4-24 OWNERS MANUAL 24 VAC 90 WATT WALL MOUNTED CCTV POWER SUPPLY
PS4-24 OWNERS MANUAL 24 VAC 90 WATT WALL MOUNTED CCTV POWER SUPPLY 7320 Ashcroft, Suite 104 Houston, Texas 77081 p: 713-772-1404 f: 713-772-7360 e: info@juicegoose.com www.juicegoose.com 06-06 CONGRATULATIONS
BRITISH STYLE SEMICONDUCTOR PROTECTION FUSES
The Edison British Style semiconductor protection fuses include a 660VAC line utilizing new filler technology. These new fuses have greatly reduced peak let-through current and energy under fault conditions
AF09-30-22-.. / AF09Z-30-22-.. 2-stack 3-pole Contactors AC / DC Operated - with Screw Terminals
Technical Datasheet 1SBC101403D0201 24/03/11 AF09-30-22-.. / AF09Z-30-22-.. 2-stack 3-pole Contactors AC / DC Operated - with Screw Terminals AF09(Z) contactors are used for controlling power circuits
Safety technique. Emergency stop module BO 5988 safemaster
Safety technique Emergency stop module BO 5988 safemaster 0221562 Function diagram Pushbutton on Mains or emergencystop () K1 According to EC Directive for machines 98/37/EG According to IEC/E 60204-1
Installation Instructions
H5HK Series Installation Instructions 3 Phase Electric Heater Kits 7.5 and 0 TON Package A/C Systems Description Installation of 08/40V and 480V H5HK 3 Phase Heater Kits in 7.5 and 0 TON Packaged Air Conditioners.
Thermistor motor protection
Thermistor motor protection CM-E Range Thermistor motor protection Thermistor motor protection relays Benefits and advantages Selection table Operating principle and fields of application for thermistor
E2 Series Electric Furnaces
E2 Series Electric Furnaces Service Manual Table of Contents Electrical Requirements... 10 Codes, Specifications Requirements... 10 Connection Supply Service Wires... 10 Furnace Sequence of Operation...
Micro Contactors. Micro Contactor Relays. Micro Contactors With Solder Pins. Coil voltages. Micro Reversing Contactor. Technical Data.
Micro Contactors Micro Contactor Relays 0 Micro Contactors Micro Contactors With Solder Pins Coil voltages Micro Reversing Contactor 3 Technical Data 4 Dimensions 8 9 Micro Contactor Relays 4pole C Operated
12VDC MAGNETIC LED DIMMABLE POWER SUPPLIES SPEC SHEET DIGEST
12VDC MAGNETIC ED DIMMABE POER SUPPIES SPEC SEET DIGEST TM-30-DIM TM-50-DIM T-60-DIM TM100-DIM TM200-DIM TM300-DIM iring Diagram for TM-50-DIM and TM-100-DIM ED 12VDC MAGNETIC DIMMABE 30 POER SUPPY Smallest
Pump Specifications 405 Series Commercial Drain Pump (High-Temp) 2 Solids handling
Pump Specifications 405 Series Commercial Drain Pump (High-Temp) 2 Solids handling 405_P1 R1/27/2012 Copyright 2012 Liberty Pumps Inc. All rights reserved. Specifications subject to change without notice.
D-Line Contactors, Overload Relays and Accessories
D-Line Contactors, Overload Relays and Accessories Class 850 CONTENTS Description......................................................Page General Information...............................................
Vario-Series Accessories
Accessories and spare parts for GMW analogue panel meters and controllers Current Transformers pages 2-9 Shunt Resistors 10-11 Voltage Dividers 12 Power supply for indicator/controllers 13 Blanking Plates
BETA Protecting SITOR Semiconductor Fuses
BETA Protecting SITOR Semiconductor Fuses /2 Product overview /3 /17 SITOR, cylindrical fuse design /22 SILIZED, NEOZED and DIAZED design Siemens ET B1 /2008 Product overview Overview Devices Page Field
Z-TRAUQ INC. Tel.: (450)226-6997 Fax: (450)226-5837 z-trauq@qc.aira.com
CURRENT TRANSFORMER MODEL J " x 7" PAGE No 2-2 REV 8DEC00 TERMINAL OPTION LEAD WIRE OPTION 8-2 BRASS SCREW TERMINALS (2 PLACES) SEE NOTE 9 6 9 8 6 Ø 2 9 (4 PLACES) UL 05 #6 AWG LEAD WIRE, STANDARD LENGTH
Commercial Gas Furnace Upflow
Commercial Gas Furnace Upflow Model G24-200 80% A.F.U.E. 200,000 Btuh Input Heating Cap. 7.5 or 10 Tons Nominal Add-On Cooling GUK FEATURES Certified by A.G.A./C.G.A. Laboratories. Heavy gauge painted
Product Description Full Voltage Starting Electric Fire Pump Controllers FTA1000
Product Description Full Voltage Starting Electric Fire Pump Controllers FTA1000 Description Firetrol FTA1000 Full Voltage Fire Pump Controllers are intended for use with electric motor driven fi re pumps
Manual Switches Series 2 Pushbutton Switches and Indicators
BARRIER MOUNT Display screen (page 115) Mounting barrier (next page) Housing (next page) FEATURES Easy-to-assemble modules provide thousands of display/control combinations Up to 4 incandescent lamps 1,
British BS 88 Fuses. Introduction
British BS 88 Introduction British BS 88 Contents Fuse Volts Amp Range Page 0-900 188-190 90-791-19 Accessories Indicator System & Fuse Bases 195 British BS 88 Fuse Ranges Amps Vac Vdc -900 0 150-710 90
PS6500 Storage Arrays Rack Mount Instructions
PS6500 Storage Arrays Rack Mount Instructions Part Number: R724M Rev. A01 Copyright 2010 Dell, Inc. All rights reserved. Dell is a trademark of Dell, Inc. EqualLogic is a registered trademark. All trademarks
SECTION 26 09 13 - POWER MONITOR FOR ELECTRICAL, STEAM CONDENSATE, AND WATER PART I - GENERAL
SECTION 26 09 13 - POWER MONITOR FOR ELECTRICAL, STEAM CONDENSATE, AND WATER PART I - GENERAL 1.1 SUMMARY A. This section describes the requirements for the installation of Power Monitors and associated
Electronic overload relay EF65, EF96 and EF146
Data sheet Electronic overload relay EF65, EF96 and EF146 Electronic overload relays offer reliable protection in case of overload and phase-failure. They are the alternative to thermal overload relays.
Electrical Grounding. Appendix C
Appendix C Electrical Grounding Low-Voltage Equipment Grounding The most frequently cited Office of Safety and Health Administration (OSHA) electrical violation is improper occupational grounding of equipment
TP-C2 Motor Operator CLEAVELAND / PRICE INC. Bulletin DB-111B12
Bulletin DB-111B12 TP-C2 Motor Operator CLEAVELAND / PRICE INC. 14000 Rt. 993, Trafford, PA 15085 (724) 864-4177 FAX (724) 864-9040 Email: sales@cleavelandprice.com Cleaveland/Price Type TP-C2 Motor Operator
How To Power A Power Supply On A Powerline From A Power Source To A Power Box
Power Base AI Power Base AI Application Guide Table of Contents Product Overview Our Philosophy On Electrical... 4 System Overview... 5 Power Base AI Statement of Line.... 6 Power Base AI Components...
Installation Instructions for EHD, EDB, EDS, ED, EDH, EDC, FDB, FD, HFD, FDC, HFDDC Circuit Breakers and Molded Case Switches
Instruction Leaflet IL 29C101I Supersedes IL 29C101H Dated 1/11 Contents Description Page Introduction.............................. 2 Installation............................... 2 Manual Operation.........................
IEC style contactors - long electrical and mechanical life Complete range from mini-contactors to 630 Amp i n d u c t i ve AC3 ra t i n g s Wide
- long al and mechanical life Complete range from mini-contactors to 630 Amp i n d u c t i ve AC3 ra t i n g s Wide range coils +0% to -30% Finger safe terminals Four-pole versions available NO + NC and
Secondary Unit Substations
14 SWITCHGEAR Secondary Unit Substations Overview Siemens offers a wide variety of unit substation designs to meet customer requirements. A unit substation consists of one or more transformers mechanically
3.0 CHARACTERISTICS. AR Auxiliary Relay High Speed, High Threshold 41-759.3C
41-759.3C the magnetic core upon energizing of the switch. When the switch closes, the moving contacts bridge two stationary contacts, completing the trip circuit. Also during this operation two fingers
0.84" x 2.00" Z-TRAUQ INC. Tel.: (450)226-6997 Fax: (450)226-5837 z-trauq@qc.aira.com SPLIT CORE CURRENT TRANSFORMER MODEL 1SP.
SPLIT CORE CURRENT MODEL 1SP 0.84" x 2.00" PAGE No 3-2 REV 18DEC00 UL 1015 LEAD WIRE, STANDARD LENGTH IS 36 E DIMENSIONS A = 0.84 MIN B = 2.00 MIN C = 3.31 MAX D = 3.09 MAX E = 0.61 MAX F = 0 MAX F C B
Safe Torque Off Option (Series B) for PowerFlex 40P and PowerFlex 70 Enhanced Control AC Drives
User Manual Safe Torque Off Option (Series B) for PowerFlex 40P and PowerFlex 70 Enhanced Control AC Drives Catalog Number 20A-DG01 Topic Page General Description 2 What Is the DriveGuard Safe Torque Off
RMM2 Heat-Tracing Remote Monitoring Module for the Raychem NGC Control System Installation Instructions
Heat-Tracing Remote Monitoring Module for the NGC Control System Installation Instructions Tools Required 3 mm slotted screwdriver 3/8 hex key (for -4X only) Approvals Nonhazardous locations Type NM LISTED
Tmax MCCBs. Molded case circuit breakers. Tmax
Molded case circuit breakers Introduction ABB is once again demonstrating its commitment to new product development and its superiority in product performance. Never before has the industry seen such high
Electronic, Digital and Mechanical Vibration Switches
PT500 Electro-Mechanical Vibration Switch Introduction The PT500 is an economical solution that provides basic vibration protection for rotating reciprocating machines. The PT500 uses an inertia sensitive
Series 427. 1/16 DIN Multi-Mode Bar Graph Display Timer TIMERS PRODUCT HIGHLIGHTS
Series 427 1/16 DIN Multi-Mode Bar Graph Display Timer PRODUCT HIGHLIGHTS Digital Setting with 0.1% Accuracy Unique LED Bargraph Indicates Time Cycle in 20% Increments 8 Field Selectable Modes of Operation
Instructions for Class W200, W201, Sizes 5 and 6, Three Phase Non-Reversing Magnetic Motor Starters and Contactors
I.L. 17405 Revision F Instructions for Class W200, W201, Sizes 5 and 6, Three Phase Non-Reversing Magnetic Motor Starters and Contactors RATINGS The maximum horsepower ratings of these motor controllers
UNIVERSITY OF WASHINGTON Facilities Services Design Guide. Electrical. Switchboards. Basis of Design. Design Evaluation
Basis of Design This section applies to the design relating to low voltage switchboards. Design Criteria UW Class N1 facilities main switchboards shall be rear accessible. The main, tie and feeder breakers
Thyristor-controlled power supplies and battery chargers
Thyristor-controlled power supplies and battery chargers Input voltage: 115 / 230 VAC, single phase, 50 / 60 Hz or 208 / 400 / 480 VAC, three phases, 50 / 60 Hz Output voltage: 12 / 24 / 48 / 60 / 72 /
Machine Safety Switches
Machine Switches SI-LS31H Series 31 mm Limit-Switch-Style with Hinged Lever Actuators Features Limit switch design (EN 50047) For use on doors or flaps Positive opening safety contacts (IEC 60947-5-1)