Spring Loaded Contacts
|
|
- Patricia Powers
- 7 years ago
- Views:
Transcription
1 Spring Loaded Contacts Contents ATE Spring Probes Specifications One Part Probes Two Part Probes Spring Loaded Contacts Specifications Spring Loaded Contact Connectors Single Spring Loaded Contacts SMT Contact Pads
2 ATE Spring Probes Specification Materials Electrical Plunger P1113CA3, P1113CV3: Brass, Gold Finish P1113SS3: High Carbon Steel, Nickel finish Two-Part Spring Probes: Beryllium Copper, Gold Finish Barrel One-Part Spring Probes: Brass, Gold Finish P25-XX26: Brass, Gold Finish Other Two-Part Spring Probes: Phosphor Bronze, Gold Finish Spring One-Part Spring Probes: Spring Steel, Gold Finish P13 Series: Music Wire, Gold Finish P19 Series: Stainless Steel P , P : Stainless Steel P25-XX23: Stainless Steel P25-XX26: Music Wire, Gold Finish Sleeve S13-503: Phosphor Bronze, Gold Finish Other: Brass, Gold Finish Current One-Part Spring Probes: Two-Part Spring Probes: Contact resistance One-Part Spring Probes: P13 Series: P19 Series: P , P : P25-XX23: P25-XX26: Durability: Full travel: Spring force at full travel: 2A max 3A 50mΩ max 30mΩ max 30mΩ max 30mΩ max 50mΩ max at 2/3 Travel 30mΩ max 1,000,000 operations See individual pages See individual pages SPRING PROBES Packaging Format: Loose Environmental Operating temperature: -40 C to +85 C Plunger Head Styles HEAD STYLE TYPICAL USE HEAD STYLE TYPICAL USE SPEAR, CONVEX PCB lands and pads, clean plated through holes SERRATED Slightly contaminated leads, pin and blades; male connector pins CONVEX RADIUS, SPHERICAL RADIUS Edge fingers, some connectors; positive contacts without marking or indentations STAR PCB plated through holes, connector testing; self-cleaning FLAT Clean male pins, lands and pads TULIP General purpose; 6 outer points, one central; self-cleaning CONCAVE, CONCAVE RADIUS Clean leads or clean terminal pins CROWN Contaminated PCB leads and pads; self-cleaning 240
3 ATE Spring Probes One-Part Test Probes SPRING PROBES Single piece spring test probe, with a selection of head styles for different probing surfaces. Can be assembled as either interference fit to a test jig, and wire attached to the rear groove, or clearance fit and soldered to a PCB for electrical connection. Full travel: 3.18mm Spring force At full travel: 0.75N At working length (2.20mm travel): 0.54N Suitable for a minimum pitch spacing of 3mm. PC Board Hole: Ø2.20mm (clearance fit) or Ømm (interference fit). Plunger Barrel 2.02 Ø2.55 Ø CONCAVE RADIUS HEAD CONVEX RADIUS HEAD CONVEX HEAD Ø2.39 Ø1.02 Ø2.39 (2.02) Ø1.02 Ø Ø1.02 SR3.05 SR3.05 (2.02) P1113CA3 P1113CV3 P1113SS3 241
4 ATE Spring Probes Two-Part Test Probes for 1.27mm Pitch Two piece test probe probe can be replaced when damaged or worn out, without re-soldering to test jig. Sleeve can be assembled as either interference fit to a test jig, and wire attached to the rear bore, or clearance fit and soldered to a PCB for electrical connection. Slim miniature probes, suitable for mounting at 1.27mm pitch between centres. SPRING PROBES Full travel: 2.65mm Spring force At full travel: 1.18N At 2/3 travel: 0.88N SPEAR HEAD 3.35 Ø Ø P CONCAVE HEAD CONVEX HEAD SERRATED HEAD Ø P P P SLEEVE Suitable for use with 30AWG wire. Ø0.97 Ø0.86 Ø0.65 Internal Diameter Ø S
5 ATE Spring Probes Two-Part Test Probes for 1.90mm Pitch SPRING PROBES Two piece test probe probe can be replaced when damaged or worn out, without re-soldering to test jig. Sleeve can be assembled as either interference fit to a test jig, and wire attached to the rear bore, or clearance fit and soldered to a PCB for electrical connection. Slim miniature probes, suitable for mounting at 1.90mm pitch between centres. Full travel: 2.54mm Spring force At full travel: 1.26N At 2/3 travel: 0.88N SPEAR HEAD 3.35 Ø Ø P CONCAVE HEAD CONVEX HEAD SERRATED HEAD P P P SLEEVE Suitable for use with 24 to 30AWG wire. Ø1.44 Ø1.31 Ø0.95 Internal Diameter Ø S
6 ATE Spring Probes Two-Part Test Probes for 2.54mm Pitch Two piece short probe, for low-profile test jigs. Can be mounted at 2.54mm pitch between centres. Serrated Head style see Introduction page for applications. SPRING PROBES Full travel: 1.50mm Spring force At full travel: 1.08N At 2/3 travel: 0.78N 7.5mm BODY Ø Ø1.02 Ø1.37 P SLEEVE Suitable for use with 22 to 30AWG wire. Ø1.81 Ø1.66 Ø1.22 Internal Diameter Ø S
7 ATE Spring Probes Two-Part Test Probes for 2.54mm Pitch SPRING PROBES Two piece test probe probe can be replaced when damaged or worn out, without re-soldering to test jig. Medium-length probes for 2.54mm minimum pitch, with 4.2mm travel. Applicable sleeves shown on following page. Full travel: 4.20mm Spring force At full travel: 1.47N At 2/3 travel: 1.13N FLAT HEAD Ø1.36 (P25-xx23) Ø1.37 (P ) 4.20 Ø1.03 (P25-xx23) Ø0.75 (P ) Ø1.80 P SPEAR HEAD SPHERICAL RADIUS HEAD CONCAVE HEAD SØ1.80 Ø1.80 Ø1.80 P P P CONVEX HEAD SERRATED HEAD STAR HEAD Ø Ø1.80 Ø1.80 P P P
8 ATE Spring Probes Two-Part Test Probes for 2.54mm Pitch For use with probes with 18.5mm body length, as shown on previous page. Sleeve can be assembled as either interference fit to a test jig, and wire attached to the rear bore, or clearance fit and soldered to a PCB for electrical connection. SPRING PROBES SOLDER CUP SLEEVE Suitable for use with 22 to 30AWG wire. Ø1.83 Ø1.66 Ø S WIRE-WRAP TAIL SLEEVE Ø1.83 Ø square Ø S SOLDER BARREL SLEEVE Suitable for use with 22 to 30AWG wire. Ø1.75 Ø1.83 Ø1.66 Ø1.28 Internal Diameter S
9 ATE Spring Probes Two-Part Test Probes for 2.54mm Pitch SPRING PROBES Two piece test-probe probe can be replaced when damaged or worn out, without re-soldering to test jig. Sleeve can be assembled as either interference fit to a test jig, and wire attached to the rear bore, or clearance fit and soldered to a PCB for electrical connection. Long length probe bodies with 6.3mm travel, for 2.54mm minimum pitch. SPEAR HEAD Full travel: 6.30mm Spring force At full travel: 3.43N At 2/3 travel: 2.26N Ø1.02 Ø1.36 P TULIP HEAD CROWN HEAD SERRATED HEAD Ø P P P WIRE WRAP TAIL SLEEVE Ø1.90 Ø1.80 Ø square Ø S SOLDER BARREL SLEEVE INSTEAD Suitable for use with 22 to 30AWG wire. Ø1.90 Ø1.80 Ø1.66 Ø1.23 Internal Diameter Ø S
10 Spring Loaded Contact Specification Materials Mouldings: Contacts Plunger: Barrel: Spring: Finish Plunger: Barrel: Packaging Format Connectors: Single contacts: Reel quantity 2-contact, 5-contact: 3-contact, 4-contact: Single contacts: High Temperature Plastic, UL94V-0 Brass Brass Stainless Steel Gold Gold Tape and Reel See individual pages 1,000 on a Ø330mm reel 800 on a Ø330mm reel See individual pages Durability: Spring force at working height 2-contact: 3-contact, 4-contact: 5-contact: Single contacts: Environmental Operating temperature: Solderability: Soldering heat resistance: 10,000 operations 1.1N ±20% at 3.9mm working height 1.2N ±20% at 3.4mm working height 0.8N ±20% at 4.5mm working height See individual pages -40 C to +85 C 235 C for 5 seconds 260 C for 10 seconds SPRING LOADED CONTACTS Electrical Current Connectors: Single contacts: Voltage Connectors: Contact resistance: Insulation resistance Connectors: 1A per contact 2A or 1A (see individual pages) 50V DC 50mΩ max 100MΩ min 248
11 Spring Loaded Contact Connectors SPRING LOADED CONTACTS Surface Mount Miniature Connectors A range of spring loaded contact connectors for maintaining a positive force against a mating surface. Low mating force enables rapid and effortless connection for a user friendly system. Tolerates significant mating misalignment. Ideal for use in portable equipment where separate battery modules are used and for data transfer docking stations. 2 CONTACTS 3 CONTACTS Ø Ø Ø Ø Ø1.80 Ø P R P R 4 CONTACTS 5 CONTACTS Ø Ø0.75 Ø Ø1.80 Ø Ø P R 2.54 P R 249
12 Spring Loaded Contact Connectors Single Spring Loaded Contacts PC Tail PC Tail Pogo pins can be soldered as surface mount, using the PC Tail for location or lateral strength. Available in Tape and Reeled packaging format for automated assembly methods. Gold finish for improved wear resistance. Additional height options shown on following page. Packaging Reel quantity P R: P R: P R: Electrical Current P R: P R: P R: 1,800 on a Ø330mm reel 800 on a Ø330mm reel 700 on a Ø330mm reel 1A 2A 2A 2.8mm FREE HEIGHT Ø0.06 Ø1.03 Ø1.00 Ø SPRING LOADED CONTACTS Spring force at working height P R: 0.39N ±0.09N at 2.10mm working height P R: 1.27N ±0.34N at 2.90mm working height P R: 1.32N +0.39/-0.29N at 4.00mm working height 3.6mm FREE HEIGHT Ø1.70 Solder pad Ø1.10 Hole 5.0mm FREE HEIGHT P R Ø Ø Ø Ø1.00 Ø Ø1.00 Ø2.40 Solder pad Ø2.40 Solder pad Ø1.20 Hole Ø1.20 Hole P R P R 250
13 Spring Loaded Contact Connectors SPRING LOADED CONTACTS Single Spring Loaded Contacts PC Tail PC Tail Pogo pins can be soldered as surface mount, using the PC Tail for location or lateral strength. Available in Tape and Reeled packaging format for automated assembly methods. Gold finish for improved wear resistance. Additional height options shown on previous page. Packaging 5.5mm FREE HEIGHT Reel quantity P R: P R: P : 600 on a Ø330mm reel 580 on a Ø330mm reel Loose Electrical Current: 2A Ø Ø Ø0.80 Spring force at working height P R: 0.68N ±0.24N at 4.50mm working height P R: 0.83N ±0.25N at 4.90mm working height P : 0.98 ±0.19N at 7.10mm working height Ø2.64 Solder pad Ø1.00 Hole P R 6.2mm FREE HEIGHT 8.2mm FREE HEIGHT Ø Ø0.70 Ø Ø1.00 Ø1.80 Solder pad Ø2.20 Solder pad Ø1.20 Hole Ø0.85 Hole P R P
14 Spring Loaded Contact Connectors Single Spring Loaded Contacts Surface Mount Also referred to as Pogo pins, used for individual contacts or irregular layout requirements. Available in Tape and Reeled packaging format for automated assembly methods. Gold finish for improved wear resistance. Additional height options shown on following page. Packaging 2.4mm FREE HEIGHT SPRING LOADED CONTACTS Reel quantity P R: P : P : 2,000 on a Ø330mm reel Loose Loose Ø Electrical Current P R: P : P : 1A 2A 2A Ø0.60 Ø Ø1.70 Spring force at working height P R: 0.68N ±0.19N at 1.90mm working height P : 0.68N ±0.19N at mm working height P : 0.98N ±0.29N at 4.00mm working height P R 2.5mm FREE HEIGHT 4.8mm FREE HEIGHT Ø1.03 Ø1.10 Ø0.60 Ø0.60 Ø Ø1.03 Ø1.14 Ø Ø1.20 Ø1.20 P P
15 Spring Loaded Contact Connectors SPRING LOADED CONTACTS Single Spring Loaded Contacts Surface Mount Also referred to as Pogo pins, used for individual contacts or irregular layout requirements. Available in Tape and Reeled packaging format for automated assembly methods. Gold finish for improved wear resistance. Additional height options shown on following page. Packaging Reel Quantity P R: P R: P R: P R: P R: 650 on a Ø330mm reel 650 on a Ø330mm reel 1,400 on a Ø330mm reel 800 on a Ø330mm reel 700 on a Ø330mm reel 6.3mm FREE HEIGHT Electrical Current: 2A Ø1.80 Ø Spring force at working height P R: 1.23N ±0.34N at 5.00mm working height P R: 0.88N ±0.29N at 2.90mm working height P R: 1.17N ±0.29N at 4.00mm working height Ø P R: 1.17N ±0.29N/-0.19N at 4.50mm working height P R: 1.29N ±0.29N at 6.20mm working height P R 3.5mm TO 7.3mm FREE HEIGHT A B Ø Ø1.60 C Ø2.20 DIM A DIM B DIM C P R P R P R P R
16 Contact Pads Surface Mount Contacts Surface mountable contact pad, ideal as a mating area for Spring Contacts, Spring Loaded Contacts and Spring Loaded Contact Connectors. Available in Tape and Reeled packaging format for automated assembly methods. Gold finish for improved wear resistance. Available in 3 shapes, with a choice of pad dimensions. CONTACT PADS Materials CIRCULAR Base material: Finish: Beryllium Copper Gold Ø3.20 Ø2.80 Electrical Current: 0.5A Contact resistance: 0.15mΩ max Environmental Operating temperature: -40 C to +85 C 0.20 S R TAPE & REEL 2,000 on a Ø178 reel RECTANGULAR OVAL W W L L T T DIM L DIM W DIM T TAPE & REEL S R ,000 on a Ø178 reel S R ,000 on a Ø178 reel S R ,000 on a Ø178 reel DIM T TAPE & REEL S R ,000 on a Ø178 reel S R ,000 on a Ø178 reel 254
STANDARD MICRO-D CONNECTORS
STANDARD MICRO-D CONNECTORS RECTANGULAR CONNECTORS Pigtail connector - Metal shell.............................. 56 Pigtail connector - Low profile - Metal shell.................... 58 Pigtail connector
More information08. SEK IDC CONNECTORS
. IDC CONNECTORS connectors for flat cables enable simple and, cost-optimized device configuration. connectors are preferably used for connection within the device. HARTING offers a broad range of these
More informationTEST SOLUTIONS CONTACTING - SEMICONDUCTOR
ENGINEERED TO CONNECT CONTACTING - SEMICONDUCTOR TEST SOLUTIONS SPECIFICATIONS AND DRAWINGS ARE SUBJECT TO ALTERATION WITHOUT PRIOR NOTICE - DIMENSIONS IN MILLIMETER CONTACTING - SEMICONDUCTOR 3 SEries
More informationCOAXICON Contacts. RF Coax Connectors. Product Facts
COXICON Contacts Product Facts Tyco Electronics provides a variety of contacts for coaxial connectors Contacts are available in a range of sizes that may be used with the various types of coaxial cable
More informationINNOVATION SUPPORTED BY A TRULY SOLID INDUSTRIAL ORGANIZATION.
CONNECTORS 2014 INNOVATION SUPPORTED BY A TRULY SOLID INDUSTRIAL ORGANIZATION. Stelvio Kontek S.p.A. is one of the leading groups in the connectors market. With a solid background in the sector and having
More information1 mm Pitch Double Rows Low Profile Board-to-Cable Connectors
NEW mm Pitch Double Rows Low Profile Board-to-Cable Connectors DF series Cable.4 Socket DF- **DS-C.8 DFF(G)- **DP-V Pin Header DF- **DS-C Socket Cable 6. PCB DFF **DP-H. Pin Header PCB Features. Contact
More informationAMP Standard Terminals and Splices. RoHS. Ready
AMP Standard Terminals and Splices RoHS Ready Table of Contents Product Facts Solderless terminals and splices performs up to today s standards for reliable termination in applications ranging from control
More informationAMPSEAL* Automotive Plug Connector and Header Assembly
AMPSEAL* Automotive Plug Connector and Header Assembly Application Specification 24 SEP 97 Rev E All dimensions are given in millimeters unless otherwise specified. All dimensional tolerances are +0.2
More informationDirectory chapter 04
M Directory chapter 04 D-Sub Mixed subminiature D connectors New Page D-Sub mixed connector system general information................... 04.02 Contact arrangements............................................
More informationSD Memory Card Connectors
SD Memory Card Connectors DM Series Withstands higher force of card insertion. Card Standard type Metal cover extends over the back of the connector. Features. Withstands higher force of card insertion
More informationAmphenolR. Now you're connected!
Table of Contents CoolPower Overview... Page 3 CoolPower Slim Drawer - DW Series... Page 4 CoolPower D-Sub - LCC17 Series... Page 7 Amphenol Power Solutions... Page 9 Other Amphenol Commercial Products...
More informationIEC Connectors. Introduction
Introduction IEC Connectors A full range of quality mains rated inlets, outlets and connectors conforming to IEC and EN 60320 specifications carrying UL, CSA, VDE and other approvals. With electrical ratings
More informationUniversal MATE-N-LOK Connectors
Product Facts Pins and sockets can be intermixed in the same housing Positive polarization Rear cavity identification completely enclosed in housings Positive locking housings Insulation capability to.00
More informationDirectory chapter 02 - DIN Power (to 6 A) Types D, E, F, FM, 2F, F9, interface connectors I/U 02. 01. Technical characteristics types D and E... 02.
Directory chapter 02 - () Types D, E, F, FM, 2F, F9, interface connectors I/U Page Technical characteristics types D and E.............................. 02.10 Type D connectors.................... 02.11
More information1000 Series Miniature Slide Switches
Miniature Switches Features/Benefits Variety of actuators and terminations Panel mount tabs available Epoxy terminal seal compatible with bottom-wash cleaning RoHS compliant Typical Applications Test &
More informationFigure 1 (end) Updated document to corporate requirements Added text to Paragraph 2.4
This specification covers the requirements for application of ELCON Drawer Series Connectors: True Hot Plug, Blind Mating Mixed Signal and Power Connectors. These connectors are designed for use in pluggable
More informationMini USB and USB 2.0-IP67 Connector System
Mini USB and USB 2.0-IP67 Connector System Section 12 Mini USB and USB 2.0-IP67 Connector System CONEC has added the Mini-USB connector. This Mini-USB IP67 receptacle and plug family, feature a bayonet
More informationDYNACAP Double Layer Capacitor
DX Series (Terminal shaped V, H) Combines two coin cells using laser welding technology to obtain a rated voltage of 5.5V. Available in either vertical or horizontal terminal leads, they are 11.5 mm in
More information.093 [2.36] Commercial Pin and Socket Connectors
Product Facts Polarized Cavity identification Low contact-mating force Dual locking lances Detent and positive locking Contacts available in brass and phosphor bronze with tin and gold plating Panel mounting
More informationAC SERIES-C TYPE DUAL CONNECTORS JACK/XLR
AC SERIES-C TYPE DUAL CONNECTORS JACK/XLR The AC Series C type chassis receptacles feature two connectors in the one space saving housing. A combined XLR female receptacle together with a 6.35mm (1/4 )
More informationZIF Connector & Flat Flexible Cable
ZIF Connector & Flat Flexible Cable 09/08-1 ZIF Connector & Flat Flexible Cable As the demand for higher density in electronic equipment increases, the use of Flexible Flat Cable (FFC) or Flexible Printed
More informationAMP. 5.0 mm Power Key Connectors (5.0 PKC) (Wire-to-Board) Soft Shell Pin and Socket Connectors. Product Facts. Standard Density
5.0 mm Power Key Connectors (5.0 PKC) (Wire-to-Board) Product Facts Compact design with 19.4 mm mated height Power circuit connector with 5.0 mm contact centerline Wire-to-board connectors consisting of
More informationTrident Connector Family Offers the Versatility and Reliability Required in Industrial & Transportation Applications
Trident Connector Family Offers the Versatility and Reliability Required in Industrial & Transportation Applications Industrial and transportation applications require robust connections with superior
More informationCIN::APSE MICROMINIATURE D-SUB
INTRODUCTION CINCH has been producing filter connectors for years and has acquired an in depth knowledge of EMC protection. CINCH offers fast delivery on a wide range of standard filtered connectors and
More informationProduct Specification
Product Specification Model No.: DC-240-L01-00-TR Description: H=3.00mm Horizontal SMD DC Power Jacks Pin Shaft Diameter: 0.65mm Packing Method: Tape & Reel (600pcs./R) 1. General 1a. Scope The jacks should
More informationwww.jameco.com 1-800-831-4242
Distributed by: www.jameco.com 1-800-831-4242 The content and copyrights of the attached material are the property of its owner. Interactive Catalog Replaces Catalog Pages Honeywell Sensing and Control
More informationUSB3.0 Micro-B Connector
USB3.0 Micro-B Connector ZX360 Series General The ZX360 Series is a Micro-USB connector that is compliant with the MicroUSB 3.0 specifications and supports up to 5Gbps high speed data transmission. As
More information400 Series Buccaneer BUCCANEER POWER. bulgin
bulgin BUCCANEER FOR POWER Contact Retainer Sealing Gasket O Ring Contacts Locking Ring Retaining Nut Panel Body Contacts Contact Carrier O Ring Main Body Cable Gland Collet Gland Nut Sealed to IP68 when
More informationONE OF THE SMALLEST SNAP-ACTION SWITCHES IN THE WORLD. FEATURES Superminiature type, light-weight snap action switch PC board terminal type (0.
ONE OF THE SMALLEST SNAP-ACTION SWITCHES IN THE WORLD SWITCHES FEATURES Superminiature type, light-weight snap action switch PC board terminal type (0.2g) Solder terminal type with mounting holes (0.3g)
More informationISO VIEW OF AX SERIES XLR CABLE CONNECTOR
ISO VIEW OF AX SERIES XLR CABLE CONNECTOR One piece ground / latch spring design incorporating twin wipe contacts for a direct connection path from mating shell to ground providing enhanced connection
More informationSMA Connectors. RF Coax Connectors. Product Facts
SMA Connectors Product Facts Performance to 12.4 GHz and beyond Available in various base metal options, including stainless steel, brass and zinc diecast Uses industry standard crimp tools and processes
More informationPRODUCT SPECIFICATION
ipass TM / ipass+ TM 0.8 mm PITCH I/O CONNECTOR SYSTEM EXTERNAL ipass / ipass+ of TABLE OF CONTENTS.0 SCOPE... 3.0 PRODUCT DESCRIPTION... 3. PRODUCT NAME AND SERIES NUMBER(S)... 3. DIMENSION, MATERIALS,
More informationHigh Power Connectors for Power Supply and Power Circuits
Introduction Silver Plated Power Contacts with Contact Springs for Maximum Performance in Exposed Applications The demand for shortest possible periods of machine shut-downs and assembly times requires
More informationFor board-to-fpc. Narrow Pitch Connectors (0.35mm pitch)
For board-to-fpc Narrow Pitch Connectors (0.35mm pitch) S35 Series New FEATURES 1. 1.7 mm wide slim two-piece type connector Mated height 0.6 mm Smaller compared to A4F series Width: Approx. 44% down
More informationJack to Jack adapters Plug to Plug U-Link connectors PCB Right angle plastic PCB Right angle - metal. Ordering Codes
BNC 75Ω RF CONNECTORS BNC 75Ω RF CONNECTORS To meet the need for higher performance, impedance matched cable interconnections, Amphenol offers a full line of 75 ohm BNC connectors. These connectors can
More informationEH CONNECTOR. 1Certified LR20812 2 R75089 89. Disconnectable Crimp style connectors. Features
Crimp 2.mm (.09") pitch EH CONNECTOR Disconnectable Crimp style connectors Radial Tape Features Compact and slim This connector is designed to be compact and unusually thin. It measures only.1mm (.19")
More informationDesign Guide: Introduction to Automated Test Fixtures
6550 Wedgwood Rd. Maple Grove, MN 55311 763-694-4100 Design Guide: Introduction to Automated Test Fixtures USA, CANADA, MEXICO, MALAYSIA, CHINA, UNITED KINGDOM Copyright Circuit Check, Inc. www.circuitcheck.com
More informationSlimSeal SSL Connector. Now Available in 1 Position. Free Hanging Version
Now Available in 1 Position Free Hanging Version SlimSeal SSL Connector The SlimSeal SSL connectors are low profile, single row connectors developed for indoor and outdoor LED lighting applications. These
More informationThis product can be assembled to the baseplate maintaining 5 mm center-to-center spacing. Thus any number of poles can end-to-end stack.
page 1/5 Plug-in Screw Connector System for Printed Circuit Boards 950-NLFL-DS 5.00 mm (0.197 in) Spacing - 2-12 poles PICTURES 950-NLFL-DS 950-NLFL & 971-SLK TECHNICAL INFORMATION Description This two
More informationSMZ type 43 INTRODUCTION. The Radiall Type 43 coaxial connector range. Type 43 series - Features and benefits
INTRODUCTION The Radiall Type 43 coaxial connector range The Radiall range of Type 43 series connectors is fully approved (where applicable) to BT (British Telecom) standards as well as to British Standard
More informationAC SERIES DUAL 1/4 (6.35mm) / XLR
AC SERIES DUAL 1/4 (6.35mm) / XLR The AC Series C type chassis receptacles feature two connectors in the one space saving housing. A combined XLR female receptacle together with a 6.35mm (1/4 ) phone jack
More informationAmphenol C 091 A/B/D. Circular Connectors. Amphenol-Tuchel Electronics GmbH
Amphenol C 091 A/B/D Circular Connectors Amphenol-Tuchel Electronics GmbH C 091 A Main Features Metal threaded coupling acc. to IEC. Number of contacts are 2 to 8, 12 and 14. Internal metal strain relief
More informationA new technology for high current, low insertion force, low resistance and long cycle life power connectors
A new technology for high current, low insertion force, low resistance and long cycle life power connectors Abstract Methode has developed a new class of patented power connector named PowerBud TM that
More informationPIDG FASTON Receptacles and Tabs
Product Facts Pre-insulated terminal designed for complete and uniform reliability in the most difficult circuit environment Consists of an unplated or tin plated brass body or a tin plated phosphor bronze
More information3M Serial Attached SCSI (SAS) Connector Boardmount Compliant Pin and Surface Mount, Vertical Receptacle
M Serial Attached SCSI (SAS) Connector 6 Gbps input/output connector for backplane applications Two contact mating levels for early-mate and latebreak allows blind mating or hot swap applications Capable
More informationNARROW-PITCH (0.8mm) CONNECTORS P8 SERIES
Socket Header Compliance with RoHS Directive NRROW-PITCH CONNECTORS FOR PC ORDS 3. Perfect for portable devices, the bellows-type provide a strong resistance against falling, impacts, and forced insertions
More informationMicro-USB connectors meeting requirements of USB 2.0 Standard
NEW Micro-USB connectors meeting requirements of USB 2.0 Standard ZX Series Note: Contact us to ascertain whether a TID number has been acquired for an individual product. Overview Extremely small high
More informationInterface RF Connector with Switch
NEW Interface RF onnector with Switch Series Overview Designed for end user applications requiring redirection of transmission from internal built-in antenna to the external antenna. Small size, lightweight
More informationSFP Single Port Multi-Port Ganged
Single Port Multi-Port Ganged Amphenol s SFP connector series is a 20 position connector and cage combo for mounting to a host PCB with a metal cage enclosing the connector. These connectors are similar
More informationOperating Temperature Range: -30 to +85ç (Note 1) Operating Humidity Range: 40 to 80%
All non- products have been discontinued, or will be discontinued soon. Please check the products status on the Hirose website search at www.hirose-connectors.com, or contact your Hirose sales representative.
More informationFlex Circuit Design and Manufacture.
Flex Circuit Design and Manufacture. Hawarden Industrial Park, Manor Lane, Deeside, Flintshire, CH5 3QZ Tel 01244 520510 Fax 01244 520721 Sales@merlincircuit.co.uk www.merlincircuit.co.uk Flex Circuit
More information0.3 mm Contact Pitch, 0.9 mm above the board, Flexible Printed Circuit ZIF Connectors.
0.3 mm Contact Pitch, 0.9 mm above the board, Flexible Printed Circuit ZIF Connectors. FH Series (51pos. type) 3.45mm 17.1mm 0.9mm Features 1. Extremely light weight The largest version, with all contacts
More informationThe Wild Children of D38999
micro38999 Series High Vibration Miniature Connectors The Wild Children of D38999 A complete range of space saving compact connectors with all of the features and capabilities of D38999 for harsh applications.
More informationODU MEDI-SNAP. Miniature Circular Connectors with Push-Pull Locking Made of Plastic or Metal. www.odu.de
Miniature Circular Connectors with Push-Pull Locking Made of Plastic or Metal Miniature Circular Connectors with Push-Pull Locking for Medical Applications Applications Medical Test and measure equipment
More informationSemiconductor SEMICONDUCTOR PROBE
Semiconductor SEMICONDUCTOR PROBE ECT has a long history on supplying double ended fine pitch probes. Thanks to our large market exposure on these products at most major semiconductor producers, we are
More informationFlexible Printed Circuits Design Guide
www.tech-etch.com/flex Flexible Printed Circuits Design Guide Multilayer SMT Assembly Selective Plating of Gold & Tin-Lead Fine Line Microvias Cantilevered & Windowed Leads 1 MATERIALS CONDUCTOR Copper
More informationElectronic Board Assembly
Electronic Board Assembly ERNI Systems Technology Systems Solutions - a one stop shop - www.erni.com Contents ERNI Systems Technology Soldering Technologies SMT soldering THR soldering THT soldering -
More informationPCI-SIG M.2 Specification Compatible Card Edge Connector. SM3 Series
COMPONENTS PRODUCT INFORMATION NEW PCI-SIG M.2 Specification Compatible Card Edge Connector SM3 Series CONNECTOR MB-0261-4 April 2015 RoHS Compliant The SM3 Series is a PCI-SIG PCI Express M.2 Specification
More informationSMA Interface Mating Dimensions (Per MIL-STD-348)
SMA Series SMA 6 SMA Interface Mating Dimensions (Per MIL-STD-348) SMA Interface Dimensions MALE Inches/Millimeters 3 Minimum Nominal Maximum LTR in. mm in. mm in. mm A.250 6.35.263 6.68.. B.1790 4.55.1808
More informationMicro-USB connectors meeting requirements of USB 2.0 Standard
All non-rohs products have been discontinued, or will be discontinued soon. Please check the products status on the Hirose website RoHS search at www.hirose-connectors.com, or contact your Hirose sales
More informationSMS - Qikmate. Performance characteristics
- Qikmate Qikmate panel and cable connectors Description The versatile Qikmate panel and cable connectors are a highly cost-effective system approach to solving the constant demand for more cost effective
More informationTopSky DLG Installation Manual
TopSky DLG Installation Manual Attention: Because after the compound materials solidify, there will be ammonia iris on the surface, which affect the bonding strength afterwards. Please polish with sandpaper
More informationSMD Terminal Blocks with Push-Buttons
SMD Terminal Blocks with Push-Buttons SMD Terminal Blocks Small is Big WAGO s new SMD Terminal Blocks provide push-button termination for conductors 0. 0.75 mm/awg 4 18 (060 Series) and 0.5 1.5 mm/awg
More informationFakra. Coaxial connectors. DC 6 GHz
C-Blue D-Bordeaux GPS application GSM/Mobil Phone The FAKRA (Automobile Expert Group) has therefore defined a standardised connector system for the various communication applications in cars. Our FAKRA-compliant
More informationStandard Buccaneer - Ethernet
IP6 rated compliant PUR jacket on cable Shielded system shielded coupler Shroud on RJ45 Screw coupling Rewireable flex connector PCB mounted panel connector IDC termination panel connector Earth lead version
More informationOutdoor Use Waterproof I/O Connectors (Optical / Modular / Electrical) FO-BH, FO-BC, NT5, JN2 / W Series
COMPONENTS PRODUCT INFORMATION RoHS Compliant NEW Outdoor Use Waterproof I/O Connectors (Optical / Modular / Electrical) FO-BH, FO-BC, NT5, JN2 / W Series Optical FO-BH Series (Compact Type) CONNECTOR
More informationFigure 1 (end) Application Specification 114 13088 provides application requirements for MICTOR Right Angle Connectors for SMT PC Board Applications
This specification covers requirements for application of MICTOR Vertical Board to Board Plugs and Receptacles designed for pc boards. The connectors have an in row contact spacing on 0.64 [.025] centerlines.
More informationMTA, CST-100 II, SL-156 and AMP Economy Power (EP) Connectors
MP Economy Power (EP) Connectors Table of Contents 2 Introduction This catalog has been designed to assist you, our customer, identify products to satisfy your connector needs for printed circuit board
More informationOutside Plant Precision Cooling Site Monitoring and Services
Emerson Network Power Connectivity Solutions Johnson 299 Johnson Avenue Waseca, MN 56093 USA Tel: 800.247.8256 Fax: 507.833.6287 www.emersonnetworkpower.com/connectivity About Emerson Network Power Connectivity
More informationKSC Series Sealed Tact Switch for SMT
KSC Series Features/enefits Positive tactile feeling J or G terminations Various heights IP67 Typical Applications Automotive Cellular phones Industrial electronics Network infrastructure and IT Elevator
More informationPermanent Magnetic Generator Construction Manual
Permanent Magnetic Generator Construction Manual http://hojomotor.com Our Team Doing an On-site Assembly in Peru http://hojomotor.com Section 1) Introduction This manual describes how to build a 'permanent
More information2S-Series Sub-Miniature Toggle Switches
Carling Technologies S-Series Sub-Miniature Toggle Switch SS-Series Sealed Sub-Miniature Toggle Switch SM-Series Sealed Surface Mount Sub-Miniature Toggle Switch S-Series Ordering Scheme Specifications
More informationSealed Industrial Ethernet Circular IP67 Cat. 5e RJ45 Connector System
Revised Sept--22-2009 Sealed Industrial Ethernet Circular IP67 Cat. 5e RJ45 Connector System Description The sealed circular RJ45 connector system is designed for use in harsh environments. The connector
More information6000 Series Buccaneer
Robust, instant connections for harsh environments 6000 Series Buccaneer - circular connectors that combine the ease of use of a push/pull coupling mechanism with proven environmental sealing. Available
More informationCCM05 SD, MMC & minisd
For one of the most common card formats, we offer various reading options in a small and sturdy packaging. This includes the smaller standard of the minisd, designed for the mobile communication needs.
More informationGeneral Information. Lower Frequency Models Custom Designs Special Flanges Narrow Band Specials VSWR. Frequency ( GHz) COMMON SPECIFICATIONS
Waveguide Adapters General Information DC - 26.5 GHz High Performance 1.15 Typical VSWR Male or Female Connectors available Choke Flange Types available -65 o C to +125 o C Operating Temperature Midwest
More informationCatalog C-004 Rev. F
Catalog C-004 Rev. F Experience Founded in 1966 Involvement in the development of international connector specifications through EIA, IEC and ISO as well as PICMG. Introduction of new and unique connector
More informationFlexible Circuit Simple Design Guide
Flexible Circuit Simple Design Guide INDEX Flexible Circuit Board Types and Definitions Design Guides and Rules Process Flow Raw Material Single Side Flexible PCB Single Side Flexible PCB (Cover layer
More informationPIN IN PASTE APPLICATION NOTE. www.littelfuse.com
PIN IN PASTE APPLICATION NOTE 042106 technical expertise and application leadership, we proudly introduce the INTRODUCTION The Pin in Paste method, also called through-hole reflow technology, has become
More informationTrapezoidal-Connectors Series TMC
Trapezoidal-Connectors Series TMC Subminiature-D Connectors to DIN 41 652/IEC 807-3 General Series TMC connectors are available in 5 different housing sizes with 9, 15, 25, 37 and 50 pins. In applications
More informationSOURIAU s discrete wire sealing
SOURIAU s discrete wire sealing Description Using proven grommet technology from SOURIAU s extensive knowledge of harsh environments, the UTO & UTS connectors with grommet garantie a discrete wire sealing
More informationXG2. Flat Cable Connectors for PCBs. Achieve Total Cost Reduction through High-density Mounting and Reduced Wiring. Terminal Arrangement
Flat Cable Connectors for PCBs XG2 Achieve Total Cost Reduction through High-density Mounting and Reduced Wiring IDC connections allow you to wire all terminals at once without terminating the cable. Can
More informationSC-1000/2000 ROTARY CODED SWITCHES FEATURES PART NUMBER DESIGNATION S C - 1 0 1 0 T B. RoHS compliant
SC-00/2000 RoHS compliant INTERNAL STRUCTURE SC-00 / 2000 series 4 2 3 6 FEATURES BC RoHS compliant Fine click with metallic spring Low profile of 3.9 mm makes perfect for high density board mounting applications
More informationApplication Specification SIAMEZE * Standard and 114-13166 Fine Range Terminals 18 Mar 11 Rev C
Application Specification SIAMEZE * Standard and 4-66 Fine Range Terminals 8 Mar Rev C NOTE i All numerical values are in metric units [with U.S. customary units in brackets]. Dimensions are in millimeters
More informationThe Alphabet soup of IPC Specifications. 340 Raleigh Street Holly Springs, NC 27540
The Alphabet soup of IPC Specifications 340 Raleigh Street Holly Springs, NC 27540 http://www.circuittechnology.com (919) 552 3434 About the IPC IPC-the electronics industry standard Founded in 1957 as
More informationSURFACE MOUNT CERMET TRIMMERS (SINGLE TURN) Rotor. Wiper. Cover. Pin S T - 2 T A 1 0 0 Ω ( 1 0 1 )
SURFACE MOUNT CERMET TRIMMERS (SINGLE TURN) COPAL ELECTRONICS RoHS compliant INTERNAL STRUCTURE 8 4 7! 5! 9 FEATURES RoHS compliant Compact and low-profile mm single turn type Sealed construction 4 5 7
More informationUltra Small Surface Mount Coaxial Connectors - 1.9mm or 2.4mm Mated Height
All non- products have been discontinued, or will be discontinued soon. Please check the products status on the Hirose website search at www.hirose-connectors.com, or contact your Hirose sales representative.
More information6000 Series Buccaneer. 30 twist locking Tamperproof lock prevents accidental un-mating. Cat 5e shielded coupler Maintains shielding
circular connectors that combine the ease of use of a push/pull coupling mechanism with proven environmental sealing. Available with metal or plastic bodies, the range supports both data (USB and Ethernet),
More informationOptimizing Insertion Extraction Force in a Pin-Socket Interconnect
Optimizing Insertion Extraction Force in a Pin-Socket Interconnect IC Socket industry trends are impacted by a combination of technology and market- driven factors. Technology driven factors include miniaturization,
More informationWIRE, TERMINAL AND CONNECTOR REPAIR CONDUCTORS
CONDUCTORS Conductors are needed to complete the path for electrical current to flow from the power source to the working devices and back to the power source. Special wiring is needed for battery cables
More information14 PHOENIX CONTACT Courtesy of Power/mation. 1310 Energy Lane, Saint Paul, MN 55108. info@powermation.com - 800-843-9859 - www.powermation.
14 PHOENIX CONTACT PLUSCON circular is a circular connector for use in industrial automation. The range of design sizes available is varied, starting with the design sizes M5 to M8 and M1, for sensor/actuator
More informationIndustry trends continue to push power supply
Contact Design Raises Connector Power Density Power contacts based on a tensioned-weave socket design overcome the limitations of springbeam contacts by separating the electrical and mechanical functions
More informationST-2 SURFACE MOUNT CERMET TRIMMERS (SINGLE TURN) FEATURES PART NUMBER DESIGNATION S T - 2 T A 1 0 0 Ω ( 1 0 1 ) RoHS compliant
SURFACE MOUNT CERMET TRIMMERS (SINGLE TURN) ST- RoHS compliant INTERNAL STRUCTURE 8 4 7 FEATURES RoHS compliant Compact and low-profile mm single turn type Sealed construction 4 5 7 8 9!! 5 Part name Housing
More informationLEADER IN CUTTING TECHNOLOGY
LEADER IN CUTTING TECHNOLOGY FOR OVER 2 YEARS REASONS WHY TRONEX IS THE BEST IN THE WORLD 1 2 SUPERIOR CUTTING PERFORMANCE Cut hundreds of thousands of times before dulling. Cut hundreds of thousands of
More information01. HARTING RJ INDUSTRIAL RJ45 ETHERNET CONNECTORS
. HARTING RJ INDUSTRIAL ETHERNET CONNECTORS Ethernet is is coming up to standard industrial interface. Therefore, automation devices such as controllers, sensors and actuators feature possess on one or
More information0.2 mm Pitch, 0.9 mm above the board, Flexible Printed Circuit ZIF Connectors
0.9 0.2 mm Pitch, 0.9 mm above the board, Flexible Printed Circuit ZIF Connectors FH43B Series Space saving 17.8mm(81 pos. shown) 2.77 Can be mounted over conductive traces. Features 1. Low-profile, small
More informationProduct Name Hexa-Band Cellular SMD Antenna GSM / CDMA / DCS / PCS / WCDMA /UMTS /HSDPA / GPRS / EDGE 800 MHz to 2200 MHz
Anam PA.25a Specification Part No. PA.25a Product Name Anam Hexa-Band Cellular SMD Antenna GSM / CDMA / DCS / PCS / WCDMA /UMTS /HSDPA / GPRS / EDGE 800 MHz to 2200 MHz Feature High Efficiency Multi-Band
More informationQM (1.78mm-.070") CONNECTORS-"MICRO 70"
QM (1.78mm-.070") CONNECTORS-"MICRO 70" General Designed to fill the needs of high density and miniature interconnection, the QM series are Super-Small IDC Connection. This IDC plug uses I/O Cable
More informationTEGAM Test Leads Work With Most Manufacturers Four-wire Ohmmeters
TEGAM Test Leads Work With Most Manufacturers Four-wire Ohmmeters INTRODUCTION Precision measurements require accurate, reliable connections all the way to the device under test. TEGAM manufactures precision
More informationPreface xiii Introduction xv 1 Planning for surface mount design General electronic products 3 Dedicated service electronic products 3 High-reliability electronic products 4 Defining the environmental
More information