RSS Rectilinear Suspended Series

Transcription

1 Catalog # : Project : Prepared By : Date : RSS The RSS Rectilinear Suspended luminaire adds a truly unique, seamless and sophisticated look to any project requiring an easy to install, upscale lighting unit. The RSS lighting system is flexible in its design, making it the perfect choice for high-end hotel lobbies, offices, universities, and retail spaces. Features & Specifications Optical System High transmission snap-in impact-resistant diffuse acrylic lens eliminates bright spots from individual LEDs and provides high vertical illumination and visual comfort. Use of closely spaced medium-power, high brightness chips minimizes pixelation and provides uniform lens luminance. Available in 5000K, 4000K, 3500K, and 3000K color temperatures. Minimum CRI of 82. Electrical High-performance driver features over-voltage, under-voltage, short-circuit and over temperature protection. 0-10V dimming (1% - 100%) standard. Standard Universal Voltage ( Vac) Input 50/60 Hz or optional High voltage (347 Vac). L70 Calculated Life: >100k Hours (See Lumen Maintenance on Page 2) Total harmonic distortion: <20% Operating temperature: C to +40 C (-40 F to +104 F) Power factor: >.95 Input power stays constant over life. Factory pre-wired to section ends with quick-wire connectors Optional V 12W integral emergency battery pack is available to meet critical life-safety lighting requirements. The 90-minute batteries provide constant power to the LED system, ensuring code compliance. A test switch/indicator button is installed beneath the snap in lens mounted to the reflector. Product Overview ARRA Funding Compliant 4 ft Pendant 8 ft Pendant 2x2ft Horizontal Corner Controls Optional integral passive infrared occupancy sensor, see page 5 for more details. Optional integral daylight harvesting sensor, see page 5 for more details.

2 Features & Specifications (Cont.) Construction Rigid extruded aluminum housing for consistency and strength. Die Cast Aluminum End Caps. Available in 4 and 8 sections for individual or continuous row mounting. Consult Factory for custom length. Seamlessly create a variety of shapes with straight and corner units. Ultra-thin luminaire height and lightweight design effectively target a broad range of applications and allow for easy installations. Luminaire is proudly made in the U.S. Housing is treated with phosphate rust inhibitor and painted with textured white powder coat paint. Finish coating of housing reflecting surfaces is with high-reflectance glossy white (minimum 92%) polyester powder. Weight: 3 lbs/ft. Single point adjustable length 1/16 diameter cable for mounting to suspended or hard ceilings. Stem mounting option available. 5 diameter powder coated steel canopy for feed locations. 2 diameter powder coated steel canopy for non-feed locations. Installation Quick connect harness to attach fixtures in continuous rows. Hanger bracket to provide hanging support between fixtures. Alignment guides ensure proper alignment from fixture to fixture. Power access on top of fixtures. Warranty LSI LED Fixtures carry a 5-year warranty. 1 Year warranty on optional Battery Back Up. Test regularly in accordance with local codes. Listings culus dry/damp Locations per UL 1598 and UL 8750; CSA 22.2 No RoHS Compliant. State of California Title 24. American Recovery and Reinvestment Act Funding Compliant. Lighting Facts Approved. Performance DELIVERED LUMENS - PER FOOT* SIZE OUTPUT 3000K 3500K 4000K 5000K WATTAGE 06L *LED Chips are frequently updated therefore values may increase. ELECTRICAL DATA - PER FOOT* OUTPUT 120V 208V 240V 277V 347V 06L 0.048A 0.027A 0.024A 0.021A 0.016A 10L 0.073A 0.042A 0.036A 0.031A 0.025A 11L 0.087A 0.050A 0.043A 0.038A 0.030A 13L 0.100A 0.058A 0.050A 0.043A 0.035A *Electrical data at 25C (77F). Actual wattage may differ by +/-10%. RECOMMENDED LUMEN MAINTENANCE 1 Ambient 0 C (32 F) 5 C (41 F) 10 C (50 F) 15 C (59 F) 20 C (68 F) 25 C (77 F) 30 C (86 F) 35 C (95 F) 10L 11L 13L 06L 10L 11L 13L ,078 1,095 1,132 1, ,222 1,242 1,283 1, ,010 1, ,127 1,147 1,184 1, ,280 1,300 1,344 1, Initial 2 25K hr 2 50K hr 2 75K hr 3 100K hr Lumen maintenance values at 25C are calculated per TM-21 based on LM-80 data and in-situ testing. 2 - In accordance with IESNA TM-21-11, Projected Values represent interpolated value based on time durations that are within six times the IESNA LM total test duration for the device under testing. 3 - In accordance with IESNA TM-21-11, Calculated Values represent time durations that exceed six times the IESNA LM total test duration for the device under testing. LSI Industries Inc Alliance Rd. Cincinnati, OH (513) LSI Industries Inc. All Rights Reserved. 02/09/17

3 Straight Dimensions 48 Mounting Length for 4 Fixture Endcaps Add 1/2 96 Mounting Length for 8 Fixture Corner Dimensions 2 21 Mounting Endcaps Add 1/2 21 Mounting 2 Mounting 9/16 Tee Clip 15/16 Tee Clip Screw Slot Tee Clip Mounting Strip to J-Box (J-Box by Others)

4 Straight Ordering Guide 3RSS 4 LED 11L LF UE 40 WHT OCC Luminaire Length Lumens (Per Foot) Lens Line Voltage Color Temp Finish Options 3RSS - Wide 4RSS - Wide 4-4FT 8-8FT 06L Lumens 10L - 1,000 Lumens 11L - 1,100 Lumens 13L - 1,300 Lumens LF - Frosted Diffuse K K K K RAL - Custom Color (Specify i.e. RAL829) OCC - Occupancy Sensor DAY - Daylight Sensor DOC - Daylight and Occupancy Sensor EM - Emergency Battery Pack EC - Emergency Circuit F - Fast Blow Fuse GMF - Slow Blow Fuse Corner Ordering Guide 3RSS CHO LED 11L LF UE 40 WHT Luminaire Type Lumens (Per Foot) Lens Line Voltage Color Temp Finish Options 3RSS - Wide 4RSS - Wide CHO - Horizontal 06L Lumens 10L - 1,000 Lumens 11L - 1,100 Lumens 13L - 1,300 Lumens LF - Frosted Diffuse K K K K RAL - Custom Color (Specify i.e. RAL829) EC - Emergency Circuit F - Fast Blow Fuse GMF - Slow Blow Fuse Hardware Ordering Guide SFK SP SC 9C FA 36 UE WHT Fixture Attachment Feed Cord Ceiling Attachment Cable Suspension Type Cable Suspension Length Stem Length Line Voltage Color SFD - Single circuit feed dimmable EF - Emergency circuit feed NP - Non-power feed SMP - Stem power feed SMNP - Stem non-power feed SP - Single Point Cable S - Stem Mount SC - Straight HC - Hard Ceiling 1 1C - 15/16 Tee Clip 9C - 9/16 Tee Clip SC - Screw Slot Clip NA - Non-Adjustable FA - Fully adjustable inch inch inch inch max max max NOTE: Support clips for T-bar, OR straps for J-box, with threaded stud for cable connection, one white canopy, aircraft cable, feed cord (except non-feed hangers), fixture attachment hardware. 1- Stem Mount available with hard ceiling only. Endcaps Fixture Series Width Description 3RSS - EP 4RSS - EP 3RSS - SEP 4RSS- SEP Cable mount endplate kit Cable mount endplate kit Stem mount endplate kit Stem mount endplate kit NOTE: one kit required per fixture run. LSI Industries Inc Alliance Rd. Cincinnati, OH (513) LSI Industries Inc. All Rights Reserved. 02/09/17

5 Controls Daylight Sensor Optional integral daylight sensor uses a sliding setpoint control algorithm, meaning it has separate night and day setpoints that represent the desired photocell signal under that condition. To determine the correct dimming level for any given photocell reading, it calculates the level based on the slope of the line between the two setpoints. The result is accurate dimming that maintains the task illumination. Sensor has a detection cone of approximately 70. Sensor mounts to powder coat painted cold roll steel and replaces last of acrylic lens. 100% Controlled Lights Daylight Sensor Control Algorithm Night Occupancy Sensor Optional integral passive infrared occupancy sensor activates switching of luminaire light levels. Standard Factory settings: Light is activated and increased to full bright upon detection of motion. Light is turned off when target zone is absent of motion activity for ~30 minutes. Sensor has a detection cone of approximately 70, see coverage diagram. Sensor mounts to powder coat painted cold roll steel and replaces last of acrylic lens. 0 Measured Lights Day 100% 0 (0m) Occupancy Sensor Coverage Diagram 2.5' (0.8m) 5' (1.5m) 7.5' (2.3m) 10' (3m) (2.4m) 8' (1.8m) 6' (1.2m) 4' (0.6m) 2' (0m) (0.6m) 0' 2' (1.2m) 4' (1.8m) 6' (2.4m) 8' Daylight Sensor Configurator Nighttime setpoint Auto button for automatic dimming Daytime setpoint Night Auto Day Raise/lower light levels Photometry 3RSS 4 LED 06L LF XX 40 WHT Luminaire photometry has been conducted by a NVLAP accredited testing laboratory in accordance with IESNA LM As specified by IESNA LM the entire luminaire is tested as the source resulting in a luminaire efficiency of 100%. See for detailed photometric data. Photosensor Setup Remote ZONAL LUMEN SUMMARY ZONE LUMENS % OF LUMINAIRE % , % , % % % % , % % , %