2015 COURSE DESCRIPTIONS

Save this PDF as:
 WORD  PNG  TXT  JPG

Size: px
Start display at page:

Download "2015 COURSE DESCRIPTIONS"

Transcription

1 2015 COURSE DESCRIPTIONS (Courses are offered year round; see the VU HTEC CNC Training Center website for schedule) Vincennes University HTEC CNC Training Center Website: Phone:

2 VU HTEC CNC Mill / Lathe Operator This course is designed for those with a good mechanical aptitude that are seeking basic training for an entry level CNC operator position only. Even though repeated machine setups will be required to earn the credential, this course is not designed to certify a setup or a programming person. It is also designed for those currently employed as CNC operators wanting to enhance their knowledge and skills on Haas CNC machines. Programming is not covered in the hands-on portion of this class, but it is provided in the text book, the Haas Programming Workbook, and in the Immerse2Learn online training for reference and for personal study and skill enhancement. Subjects covered in the textbook include: workplace skills, safety, measurement, math, quality, metals, maintenance, drawings including GD&T, layout, hand tools, saws, offhand grinding, drilling operations, CNC basics, CNC mill setup and operation. The skills covered in the online emulator training include CNC setup and operation. The hands-on portion involves six 8-hour days over a two week period directly on Haas CNC machining centers and lathes with 1 person to a machine. One week is focused on the CNC mill and the other week is focused on the CNC lathe. Class size is limited to 5 people for the highest quality training possible. The hands-on training includes safety, machine pre-checks, coolant management, startup, tooling and workholding, setting work and tool offsets manually and with Renishaw probe routines, adjusting wear offsets, machining parts and inspecting results with precision measuring tools and probes. The final day of the class each week is dedicated to completing the requirements for the NIMS Credentialing Achievement Record, for review, and for taking the theory test to complete the credential. Precision Machining Technology; Hoffman, Hopewell, Janes, Sharp; Delmar-Cengage Learning ISBN-13: Workbooks: Haas Automation CNC Mill Programming Workbook (supplemental) Haas Automation CNC Lathe Programming Workbook (supplemental) Immerse2Learn: Basic Haas CNC Milling Machine Setup Basic Haas CNC Lathe Setup Basic Haas CNC Milling Machine Programming (supplemental) Basic Haas CNC Lathe Programming (supplemental) hours textbook and online (begin at least 4 weeks prior to on-site training) 6 eight hour days over two week s on-site working on Haas CNC machining centers Cost: $3,250 NIMS Credentials: NIMS CNC Mill Operator Level 1 NIMS CNC Lathe Operator Level 1 NIMS Measurement, Materials and Safety 2

3 VU HTEC CNC Milling: Programming, Setup & Operations Level 1 This course is designed for those with some basic CNC mill G-code programming, setup and operations experience. Subjects covered in the textbook include: workplace skills, safety, measurement, math, quality, metals, maintenance, drawings including GD&T, layout, hand tools, saws, offhand grinding, drilling operations, CNC basics, CNC mill setup and operation, basic CNC mill G-code programming, and an introduction to CAD/CAM. The skills covered in the online emulator training include CNC mill setup, programming and operation. The Haas CNC Mill Workbook also covers G&M-Code programming in much detail. The hands-on portion involves three 8-hour days directly on Haas CNC machining centers with 1 person to a machine. Class size is limited to 5 people for the highest quality training possible. The hands-on training includes safety, machine pre-checks, coolant management, startup, tooling and workholding, setting work and tool offsets manually and with Renishaw probe routines, basic G-code programming, inputting and editing programs, adjusting wear offsets, machining parts and inspecting results with precision measuring tools and probes. The Mill level 1 work pieces are aluminum; carbide endmills and drills are high performance tools; parts are dimensioned in inch; machines are run in the inch system; cutter diameter compensation is used. The final day of the class is dedicated to the NIMS Performance Test. The completed part is sent out to the NIMS Met-Tec Committee members for inspection. If the part is 100% within specification then VU will provide instructions for taking the theory test to complete the credential. Precision Machining Technology; Hoffman, Hopewell, Janes, Sharp; Delmar-Cengage Learning ISBN-13: Haas Automation CNC Mill Programming Workbook Immerse2Learn: Basic Haas CNC Milling Machine Setup Basic Haas CNC Milling Machine Programming hours textbook and online (begin at least 4 weeks prior to on-site training) 3 eight hour days on-site working on Haas CNC machining centers Cost: $1350, plus $75 for textbook, $40 NIMS registration (1 time), $28 for each NIMS test ½ off tuition, $675 Gene Haas Foundation scholarships are available for HTEC Network teachers Note: There will be a $20.00 charge if the student wishes to have the NIMS project mailed to them. NIMS Credentials: NIMS CNC Milling: Programming Setup & Operations Level 1 NIMS Measurement, Materials and Safety (optional) 3

4 VU HTEC CNC Turning: Programming, Setup & Operations Level 1 This course is designed for those with some basic CNC lathe G-code programming, setup and operations experience. Subjects covered in the textbook include: workplace skills, safety, measurement, math, quality, metals, maintenance, drawings including GD&T, layout, hand tools, saws, offhand grinding, drilling operations, CNC basics, CNC lathe setup and operation, basic CNC mill G-code programming, and an introduction to CAD/CAM. The skills covered in the online emulator training include CNC lathe setup, programming and operation. The Haas Lathe Programming Workbook also covers G&M-Code programming in much detail. The hands-on portion involves three 8-hour days directly on Haas CNC lathes with 1 person to a machine. Class size is limited to 5 people for the highest quality training possible. The hands-on training includes safety, machine pre-checks, coolant management, startup, tooling and workholding, setting work and tool offsets manually and with Renishaw touch probe, basic G-code programming, inputting and editing programs, adjusting wear offsets, machining parts and inspecting results with precision measuring tools. The Lathe level 1 work pieces are aluminum; carbide inserted turning tools are used; parts are dimensioned in inch; machines are run in the inch system; tool nose compensation and type 1 turning cycles are used. The final day of the class is dedicated to the NIMS Performance Test. The completed part is sent out to the NIMS Met-Tec Committee members for inspection. If the part is 100% within spec. then VU will provide instructions for taking the theory test to complete the credential. Precision Machining Technology; Hoffman, Hopewell, Janes, Sharp; Delmar-Cengage Learning ISBN-13: Haas Automation CNC Lathe Programming Workbook Immerse2Learn: Basic Haas CNC Lathe Setup Basic Haas CNC Lathe Programming hours textbook and online (begin at least 4 weeks prior to on-site training) 3 eight hour days on-site working on Haas CNC machining centers NIMS CNC Turning: Programming Setup & Operations Level 1 Credential Cost: $1350, plus $75 for textbook, $40 NIMS registration (1 time), $28 for each NIMS test ½ off tuition, $675 Gene Haas Foundation scholarships are available for HTEC Network teachers Note: There will be a $20.00 charge if the student wishes to have the NIMS project mailed to them. NIMS Credentials: NIMS CNC Turning: Programming Setup & Operations Level 1 NIMS Measurement, Materials and Safety (optional) 4

5 VU HTEC CNC Milling: Programming, Setup & Operations Level 2 This course is designed for those that have completed the VU HTEC CNC Milling: Programming, Setup & Operations Level 1 course and that have earned the NIMS CNC Milling: Programming Setup & Operations Level 1 Credential. (In some cases this prerequisite can be waived, contact the HTEC CNC Training Center.) The hands-on portion involves three 8-hour days directly on Haas CNC machining centers with 1 person to a machine. Class size is limited to 5 people for the highest quality training possible. The hands-on training includes safety, machine pre-checks, coolant management, startup, tooling and workholding, setting work and tool offsets manually and with Renishaw probe routines, more advanced G-code programming, inputting and editing programs, adjusting wear offsets, machining parts and inspecting results with precision measuring tools and probes. The Mill level 2 work pieces are steel; the parts are dimensioned in metric and the machine is run in the metric system; the cutting tools are high performance tools and they are metric; tool diameter compensation is used; geometry and trig calculations are required; chamfer milling calculations and operations; drilling and tapping; and the use of sub-programming. The final day of the class is dedicated to the NIMS Performance Test. The completed part is sent out to the NIMS Met-Tec Committee members for inspection. If the part is 100% within specification then VU will provide instructions for taking the theory test to complete the credential. ( Precision Machining Technology; Hoffman, Hopewell, Janes, Sharp; Delmar-Cengage Learning ISBN-13: Haas Automation CNC Mill Programming Workbook Immerse2Learn: Basic Haas CNC Milling Machine Setup Basic Haas CNC Milling Machine Programming hours textbook and online (begin at least 4 weeks prior to on-site training) 3 eight hour days on-site working on Haas CNC machining centers Cost: $1350, plus $75 for textbook, $40 NIMS registration (1 time), $40 NIMS test ½ off tuition, $675 Gene Haas Foundation scholarships are available for HTEC Network teachers Note: There will be a $20.00 charge if the student wishes to have the NIMS project mailed to them. NIMS Credentials: NIMS CNC Milling: Programming Setup & Operations Level 2 5

6 VU HTEC CNC Turning: Programming, Setup & Operations Level 2 This course is designed for those that have completed the VU HTEC CNC Turning: Programming, Setup & Operations Level 1 course and that have earned the NIMS CNC Turning: Programming Setup & Operations Level 1 Credential. (In some cases this prerequisite can be waived, contact the HTEC CNC Training Center.) The hands-on portion involves three 8-hour days directly on Haas CNC lathes with 1 person to a machine. Class size is limited to 5 people for the highest quality training possible. The hands-on training includes safety, machine pre-checks, coolant management, startup, tooling and workholding, setting work and tool offsets manually and with Renishaw touch probes, more advanced G-code programming, inputting and editing programs, adjusting wear offsets, machining parts and inspecting results with precision measuring tools. The lathe level 2 work pieces are steel; carbide inserted turning tools are used; parts are dimensioned in inch; machines are run in the inch system; tool nose compensation and type 2 turning cycles are used; geometry and trig calculations are required. The final day of the class is dedicated to the NIMS Performance Test. The completed part is sent out to the NIMS Met-Tec Committee members for inspection. If the part is 100% within spec. then VU will provide instructions for taking the theory test to complete the credential. Precision Machining Technology; Hoffman, Hopewell, Janes, Sharp; Delmar-Cengage Learning ISBN-13: Haas Automation CNC Lathe Programming Workbook Immerse2Learn: Basic Haas CNC Lathe Setup Basic Haas CNC Lathe Programming hours textbook and online (begin at least 4 weeks prior to on-site training) 3 eight hour days on-site working on Haas CNC machining centers NIMS CNC Turning: Programming Setup & Operations Level 1 Credential Cost: $1350, plus $75 for textbook, $40 NIMS registration (1 time), $40 NIMS test ½ off tuition, $675 Gene Haas Foundation scholarships are available for HTEC Network teachers Note: There will be a $20.00 charge if the student wishes to have the NIMS project mailed to them. Credential: NIMS CNC Turning: Programming Setup & Operations Level 2 Credential 6

7 VU HTEC Renishaw Getting Started with Ballbar Testing Course This course is designed for new and potential Renishaw QC20-W ballbar users. It explains why ballbar testing is needed along with the effects of temperature on quality. It provides an overview of ballbar hardware and software, along with how to configure and calibrate the system. The course provides hands-on experience performing diagnostic tests on CNC machine tools. It includes an understanding of ballbar system components; planning and writing tests; creating test templates, part program generation: running tests, analyzing test data; performing volumetric ballbar tests; and lots of hands-on experience. The 21 degrees of freedom of a three axis machine tool will be explored. The tests performed will measure potential deviations and errors in the following areas: Test errors Straightness Backlash Cyclic error Lateral play Reversal spikes Scaling errors Servo mismatch Squareness Stick slip Vibration Renishaw QC20-W Ballbar training course manual (provided) DVD: Getting Started with QC20-W Ballbar (provided) 1 eight hour day onsite training to use a Renishaw QC20-W Ballbar to run diagnostic tests and analyze data Cost: $495 per person Registration is through Renishaw, Inc., contact Ann Molloy at (847) or Ballbar classes are offered once per month at Vincennes University 7

8 VU HTEC Mastercam Mill Design and Toolpaths for Certification The Mastercam University Mill Design & Toolpaths course takes Mastercam students from square one to successfully programming parts to be machined on a CNC mill. Each of the five modules builds on the last and offers a module review to help you advance. The first module introduces the Mastercam environment and basic general functions. In the second Design module, wireframe and solid modeling functions are taught and then applied through a series of specific applications-based exercises. The third and fourth modules focus on part setup and demonstrate fundamental Mastercam toolpaths, including 2D high speed machining. The final module introduces Feature Based Machining (FBM) used to automatically detect and generate all milling and drilling operations for solid model features. The hands-on portion of this course is designed to work hand-in-hand with Mastercam University s Mill Design and Toolpaths online course. Subjects covered include 3D wireframe construction, levels, multiple construction planes and WCS s, solid modeling, stock setup and setup sheets, operations manager, speeds and feeds, print reading, machine definition, drilling, pocketing, slotting, engraving, and contour milling toolpaths, and post processing. The class reinforces the skills learned in the online training by using these techniques to design and program practical applications for the CNC machining centers. The programmed toolpaths are actually run on the CNC machines in the lab. The final day of the class is dedicated to the Certification Test. There are many excellent programming projects contained in the Mastercam University Mill Design & Toolpaths curriculum that will prepare the student for the on-site portion of the training and the certification test. Several of the programming operations generated in the classroom during the hands-on portion of the training will be taken out to the lab and run on the CNC machines to demonstrate how the Mastercam parameters affect the outcome of the program and the machining of the actual part. The test part is the six sided Mastercam Certification (Mill-CPgmM) project. Mastercam University Mill Design & Toolpaths 60 hours of online Mastercam University training 3 eight hour days on-site hands-on training Cost: $1350, plus $249 for the Mastercam University subscription The online curriculum remains active for 12 weeks ½ off tuition Gene Haas Foundation scholarships are available for HTEC Network teachers 8

9 VU HTEC Mastercam Mill Design and Toolpaths The Mastercam University Mill Design & Toolpaths course takes Mastercam students from square one to successfully programming parts to be machined on a CNC mill. Each of the five modules builds on the last and offers a module review to help you advance. The first module introduces the Mastercam environment and basic general functions. In the second Design module, wireframe and solid modeling functions are taught and then applied through a series of specific applications-based exercises. The third and fourth modules focus on part setup and demonstrate fundamental Mastercam toolpaths, including 2D high speed machining. The final module introduces Feature Based Machining (FBM) used to automatically detect and generate all milling and drilling operations for solid model features. The hands-on portion of this course is designed to work hand-in-hand with Mastercam University s Mill Design and Toolpaths online course. Subjects covered include 3D wireframe construction, levels, multiple construction planes and WCS s, solid modeling, stock setup and setup sheets, operations manager, speeds and feeds, print reading, machine definition, drilling, pocketing, slotting, engraving, and contour milling toolpaths, and post processing. The class reinforces the skills learned in the online training by using these techniques to design and program practical applications for the CNC machining centers. The programmed toolpaths are actually run on the CNC machines in the lab. There are many excellent programming projects contained in the Mastercam University Mill Design & Toolpaths curriculum that will prepare the student for the on-site portion of the training. Several of the programming operations generated in the classroom during the hands-on portion of the training will be taken out to the lab and run on the CNC machines to demonstrate how the Mastercam parameters affect the outcome of the program and the machining of the actual part. Mastercam University Mill Design & Toolpaths hours of online Mastercam University training 3 eight hour days on-site hands-on training Cost: $1350, plus $249 for the Mastercam University subscription The online curriculum remains active for 12 weeks ½ off tuition Gene Haas Foundation scholarships are available for HTEC Network teachers 9

10 10

11 VU HTEC Advanced Mastercam Mill Design and Toolpaths The Mastercam University Advanced Mill Design & Toolpaths course covers many different ways to create and machine 3D geometry, including an extensive 4th axis module. The first module teaches many different surface creation methods fundamental to a well-rounded CAD/CAM background. The second module is an overview of 3D machining strategies. In this lesson you apply many different machining strategies to similar geometry, seeing firsthand the strengths as well as best application of each of the 3D high speed toolpaths. In the third module you put all of the previous lessons into practice by creating programs similar to parts in your shop, including fixturing. The fourth module covers 4-axis machining with lessons on axis substitution, axis positioning, and radial and rotary axis machining. This module prepares you for 5-axis machining. The onsite portion of the class reinforces the skills learned in the online training by using these techniques to design and program practical applications for the CNC mills. The programmed toolpaths are actually run on the CNC machines in the lab. There are many excellent programming projects contained in the Mastercam University Advanced Mill Design & Toolpaths curriculum that will prepare the student for the on-site portion of the training. Setting up a 4-axis rotary will be covered in detail, including finding the center of rotation. Several of the programming operations generated in the classroom during the hands-on portion of the training will be taken out to the lab and run on the CNC machines to demonstrate how the Mastercam parameters affect the outcome of the program and the machining of the actual part. Mastercam University Advanced Mill Design & Toolpaths hours of online Mastercam University training 3 eight hour days on-site hands-on training Cost: $1350, plus $249 for the Mastercam University subscription The online curriculum remains active for 12 weeks ½ off tuition Gene Haas Foundation scholarships are available for HTEC Network teachers 11

12 12

13 VU HTEC Mastercam Multiaxis Toolpaths The Mastercam University Multiaxis Curve / Drill / Circle Mill course provides students with a strong foundation in 5-axis CNC programming. The class starts out with an extensive overview of axis combinations, rotary points, and zero positions as they relate to Mastercam. It then builds on how to control tool axis vectors using different geometric entities. The examples explain the many ways to control how the tool approaches and machines with a controlled 5-axis toolpath. This course also covers 5-axis positioning, drilling, trimming, circle milling, and machine simulation. The 4th Axis Rotary Machining section will serve as a review for those that have previously enrolled in the Advanced Mill Design and Toolpaths course. The onsite portion of the class reinforces the skills learned in the online training by using these techniques to design and program practical applications for the CNC mills. The programmed toolpaths are actually run on the CNC machines in the lab. There are many excellent programming projects contained in the Mastercam University Multiaxis Curve / Drill / Circle Mill curriculum that will prepare the student for the on-site portion of the training. Setting up a 5- axis trunnion will be covered in detail, including finding the center of rotation. The hands-on portion will also cover basic full 5-axis simultaneous toolpaths. Several of the programming operations generated in the classroom during the hands-on portion of the training will be taken out to the lab and run on the CNC machines to demonstrate how the Mastercam parameters affect the outcome of the program and the machining of the actual part. Mastercam University Multiaxis Curve / Drill / Circle Mill hours of online Mastercam University training 3 eight hour days on-site hands-on training Cost: $1350, plus $249 for the Mastercam University subscription The online curriculum remains active for 12 weeks ½ off tuition Gene Haas Foundation scholarships are available for HTEC Network teachers 13

14 14

15 VU HTEC Mastercam Lathe Design and Toolpaths The Mastercam University Lathe Design & Toolpaths course takes Mastercam students from square one to successfully programming parts to be machined on a CNC lathe. As you program parts you learn to store your work and knowledge. This approach helps you to save time by building on proven techniques and toolpaths. The first module covers how to create wireframe and solid lathe specific geometry in Mastercam. The second module shows how to set up a lathe file from datum, to managing toolpath libraries, to verifying toolpaths. The third module provides extensive coverage of lathe toolpaths, including basic C & Y-axis toolpaths. The onsite portion of the class reinforces the skills learned in the online training by using these techniques to design and program practical applications for the CNC lathes. The programmed toolpaths are actually run on the CNC machines in the lab. There are many excellent programming projects contained in the Mastercam University Lathe Design & Toolpaths curriculum that will prepare the student for the on-site portion of the training. Several of the programming operations generated in the classroom during the hands-on portion of the training will be taken out to the lab and run on the CNC machines to demonstrate how the Mastercam parameters affect the outcome of the program and the machining of the actual part. Mastercam University Lathe Design & Toolpaths hours of online Mastercam University training 3 eight hour days on-site hands-on training Cost: $1350, plus $249 for the Mastercam University subscription The online curriculum remains active for 12 weeks ½ off tuition Gene Haas Foundation scholarships are available for HTEC Network teachers 15

16 16

Revised September 2013. Vincennes University. Indiana Center for Applied Technology (ICAT) - Haas Technical Education Center (HTEC) CNC Machinist Now

Revised September 2013. Vincennes University. Indiana Center for Applied Technology (ICAT) - Haas Technical Education Center (HTEC) CNC Machinist Now Revised September 2013 Vincennes University Indiana Center for Applied Technology (ICAT) - Haas Technical Education Center (HTEC) CNC Machinist Now An Accelerated Training Program for Veterans and Civilians

More information

Precision Manufacturing Program

Precision Manufacturing Program Precision Manufacturing Program Conventional Precision Manufacturing (CPM) Certificate Program During this program, students learn about subjects that form a solid foundation for a career in manufacturing.

More information

Course outline. Know Your Machine From A Programmer s Viewpoint 11 If you ve had experience with conventional (non-cnc) machine tools 11

Course outline. Know Your Machine From A Programmer s Viewpoint 11 If you ve had experience with conventional (non-cnc) machine tools 11 Course outline Know Your Machine From A Programmer s Viewpoint 11 If you ve had experience with conventional (non-cnc) machine tools 11 Machine Configurations 13 Vertical machining centers 13 C-frame style

More information

Precision Manufacturing Regional Alliance Project (PMRAP) Accelerated Weekend Program. Springfield Technical Community College.

Precision Manufacturing Regional Alliance Project (PMRAP) Accelerated Weekend Program. Springfield Technical Community College. Precision Manufacturing Regional Alliance Project (PMRAP) Accelerated Weekend Program At Springfield Technical Community College Summary Report Precision Manufacturing Regional Alliance Project (PMRAP)

More information

Renishaw 2008. apply innovation TM. Calibrating 5-axis machines to improve part accuracy. 5Align

Renishaw 2008. apply innovation TM. Calibrating 5-axis machines to improve part accuracy. 5Align Calibrating 5-axis machines to improve part accuracy 5Align Productive Process Pyramid TM Understanding and tracking machine behaviour Process verification Thermal compensation In-cycle process control

More information

Comprehensive online. learning solutions that integrates: Training. Assessment. Certification

Comprehensive online. learning solutions that integrates: Training. Assessment. Certification Comprehensive online learning solutions that integrates: Training Assessment Certification David Otter Ott otter@immerse2learn.com 515.571.9963 Strategic Partners Support Haas Factory Outlet online training

More information

Machine Tool Practices, 8th Edition 2006 Correlated to: South Carolina Manufacturing Course Standards for Machine Technology 1, 2, 3, 4

Machine Tool Practices, 8th Edition 2006 Correlated to: South Carolina Manufacturing Course Standards for Machine Technology 1, 2, 3, 4 62300100 A. PERFORMING WORK SAFETY PRACTICES 62300101 Demonstrate the ability to work safely. SE: p.6-13, 208-210, 233-235 TE: Manual p.11-12, 51-52, 55-58 TECH: CD Shop Safety: PowerPoint Slides 1-8 62300102

More information

Milling and Machining Center Basics

Milling and Machining Center Basics Training Objectives After watching the video and reviewing this printed material, the viewer will gain knowledge and understanding of basic milling theories and procedures. In addition, the viewer will

More information

CNC Machine Operator Class

CNC Machine Operator Class 216 S. Pleasantburg Drive Greenville, SC 29607 www.gvltec.edu/ccd 864 250 8800 Buck Mickel Center CNC Machine Operator Class Greenville Technical College CCD (Career and Corporate Development) has structured

More information

Mastercam Instructions. KTH School of Architecture Digital Fabrication Lab - CNC Router Version 2.1 2014-02-06

Mastercam Instructions. KTH School of Architecture Digital Fabrication Lab - CNC Router Version 2.1 2014-02-06 Mastercam Instructions KTH School of Architecture Digital Fabrication Lab - CNC Router Version 2.1 2014-02-06 CONTENTS: 1. Setup in Rhino and Mastercam 2. Creating A Drilling Operation 3. Creating A Contour

More information

GIBBSCAM PRODUCTION SYSTEMS: MILLING, TURNING, AND MILL-TURN

GIBBSCAM PRODUCTION SYSTEMS: MILLING, TURNING, AND MILL-TURN GIBBSCAM PRODUCTION SYSTEMS: MILLING, TURNING, AND MILL-TURN GibbsCAM simplifies the complex, with the power to meet the challenges of the most demanding shop. GibbsCAM Production Milling and Production

More information

TALLAHASSEE COMMUNITY COLLEGE

TALLAHASSEE COMMUNITY COLLEGE TALLAHASSEE COMMUNITY COLLEGE ADVANCED MANUFACTURING TRAINING CENTER 2012/2013 Catalog All courses listed are non-credit CNC Machine Operator (Lathe & Mill) MFT 0400 Intro to CNC Machining This course

More information

CORE COMPETENCY REQUIREMENTS NIMS CERTIFIED CNC SET UP PROGRAMMER MILLING AND TURNING

CORE COMPETENCY REQUIREMENTS NIMS CERTIFIED CNC SET UP PROGRAMMER MILLING AND TURNING CORE COMPETENCY REQUIREMENTS NIMS CERTIFIED CNC SET UP PROGRAMMER MILLING AND TURNING APPRENTICE CORE COMPETENCIES 1. Identify and Demonstrate Usage of Machine Safety and Personal Protective Equipment

More information

Procedures Manual for NIMS Online Credentialing Program

Procedures Manual for NIMS Online Credentialing Program , Inc. Procedures Manual for NIMS Online Credentialing Program Machining Level I & II Revised 03/01/2005, Inc. 10565 Fairfax Boulevard, Suite 203 Fairfax, VA 22030 Office: 703-352-971 Fax: 703-352-991

More information

CNC Applications. Tool Radius Compensation for Machining Centers

CNC Applications. Tool Radius Compensation for Machining Centers CNC Applications Tool Radius Compensation for Machining Centers Why Cutter Diameter Compensation? When machining finished surfaces with the side of a milling cutter (generally called profiling), the accuracy

More information

Radius Compensation G40, G41, & G42 (cutter radius compensation for machining centers, tool nose radius compensation for turning centers)

Radius Compensation G40, G41, & G42 (cutter radius compensation for machining centers, tool nose radius compensation for turning centers) Radius Compensation G40, G41, & G42 (cutter radius compensation for machining centers, tool nose radius compensation for turning centers) These features are commonly well covered in most basic CNC courses.

More information

FEWER STEPS BETTER CUTS MORE PROFIT

FEWER STEPS BETTER CUTS MORE PROFIT CAD/CAM SOFTWARE CAD MILL MILL TURN LATHE ROUTER PLASMA LASER WATERJET WIRE FEWER STEPS BETTER CUTS MORE PROFIT EXPERIENCE THE POWER OF THE NEW BobCAD-CAM The New Power in BobCAD-CAM Version 28 comes with

More information

Presentation on CNC MACHINES. By: Hafiz Muhammad Rizwan

Presentation on CNC MACHINES. By: Hafiz Muhammad Rizwan Presentation on CNC MACHINES By: Hafiz Muhammad Rizwan WELCOME CNC Machines What is a CNC Machine? CNC : Computer Numerical Control Conventionally, an operator decides and adjusts various machines parameters

More information

Mach4 CNC Controller Mill Programming Guide Version 1.0

Mach4 CNC Controller Mill Programming Guide Version 1.0 Mach4 CNC Controller Mill Programming Guide Version 1.0 1 Copyright 2014 Newfangled Solutions, Artsoft USA, All Rights Reserved The following are registered trademarks of Microsoft Corporation: Microsoft,

More information

G and M Programming for CNC Milling Machines. Denford Limited Birds Royd Brighouse West Yorkshire England HD6 1NB Tel: +44 (0) 1484 712264

G and M Programming for CNC Milling Machines. Denford Limited Birds Royd Brighouse West Yorkshire England HD6 1NB Tel: +44 (0) 1484 712264 COMPUTERISED MACHINES AND SYSTEMS G and M Programming for CNC Milling Machines Denford Limited Birds Royd Brighouse West Yorkshire England HD6 1NB Tel: +44 (0) 1484 712264 G AND M Fax: PROGRAMMING +44

More information

Advanced solutions for 5 pieces or 5,ooo,ooo pieces and everything in between. T E C H N O L O G I E S. High Volume Hydromat.

Advanced solutions for 5 pieces or 5,ooo,ooo pieces and everything in between. T E C H N O L O G I E S. High Volume Hydromat. MACHINING T E C H N O L O G I E S High Volume Hydromat CNC Milling CNC Swiss Machining CNC Turning Engraving Secondary Operations Advanced solutions for 5 pieces or 5,ooo,ooo pieces and everything in between.

More information

CNC Applications. Introduction to Machining Centers

CNC Applications. Introduction to Machining Centers CNC Applications Introduction to Machining Centers Machining Centers A machining center is simply a CNC milling machine with an automatic tool changer and an enclosure. There are a number of different

More information

EasySTONE Info Sheet

EasySTONE Info Sheet EasySTONE Info Sheet EasySTONE, Info Sheet Page 1 of 9 EasySTONE is the ideal CAD/CAM for marble and similar materials working industry by numerically controlled machining centres. EasySTONE is complete

More information

MACHINING OPERATIONS AND MACHINE TOOLS

MACHINING OPERATIONS AND MACHINE TOOLS MACHINING OPERATIONS AND MACHINE TOOLS 1. Turning and Related Operations 2. Drilling and Related Operations 3. Milling 4. Machining & Turning Centers 5. Other Machining Operations 6. Shape, Tolerance and

More information

ANSI APPROVED 04/11/2014 ANSI APPROVED 08/17/2011. 45 Reaffirmation ANSI APPROVED 02/28/2014. 45 Reaffirmation ANSI APPROVED 05/06/2013

ANSI APPROVED 04/11/2014 ANSI APPROVED 08/17/2011. 45 Reaffirmation ANSI APPROVED 02/28/2014. 45 Reaffirmation ANSI APPROVED 05/06/2013 STANDARDS STATUS REPORT As of November 4, 2015 Note: Dates in RED indicate the last action taken; Highlighted Items Indicate New/Open Items; Grey items have been closed Document TC Status Comments ASME

More information

Overview. Milling Machine Fundamentals. Safety. Shop Etiquette. Vehicle Projects Machine Shop

Overview. Milling Machine Fundamentals. Safety. Shop Etiquette. Vehicle Projects Machine Shop Overview Milling Machine Fundamentals Wayne Staats, UW-Madison FSAE Safety Shop Etiquette Before Machining Indicating Calculating Feeds and Speeds Machining Maintenance Safety Respect the machines Common

More information

Easy Machining Center Setup

Easy Machining Center Setup White Paper Document No. MWA-072-EN_01_1404 April 2014 Easy Machining Center Setup Using FANUC s Direct Input of Workpiece Origin Setting Measured and Tool Length Measurement features to easily establish

More information

Machine Tool Inspection & Analyzer solutions

Machine Tool Inspection & Analyzer solutions Machine Tool Inspection & Analyzer solutions Introduction IBS Precision Engineering machine tool inspection series offers a range of products to provide peace of mind and control to machine operators by

More information

The Basics of a Rotary Table with Cross Slide mounted on a Mill Table, Version 2

The Basics of a Rotary Table with Cross Slide mounted on a Mill Table, Version 2 The Basics of a Rotary Table with Cross Slide mounted on a Mill Table, Version 2 by Gerry Goldberg as told to Rick Sparber 08/21/2008 Copyleft protects this article. On 08/16/2008 the Valley Metal Club

More information

Making Better Medical Devices with Multisensor Metrology

Making Better Medical Devices with Multisensor Metrology Making Better Medical Devices with Multisensor Metrology by Nate J. Rose, Chief Applications Engineer, Optical Gaging Products (OGP) Multisensor metrology is becoming a preferred quality control technology

More information

Sample. CNC Programming product family... CNC Programming: Basics & Tutorial Textbook. & CNC Programming: Reference Book. CNC Programming: Workbook

Sample. CNC Programming product family... CNC Programming: Basics & Tutorial Textbook. & CNC Programming: Reference Book. CNC Programming: Workbook CNC Programming product family... CNC Programming: Basics & Tutorial Textbook CNC Programming: Reference Book CNC Programming: Workbook CNC Programming: Workbook - Instructor Edition CNC Programming: Basics

More information

Optical Digitizing by ATOS for Press Parts and Tools

Optical Digitizing by ATOS for Press Parts and Tools Optical Digitizing by ATOS for Press Parts and Tools Konstantin Galanulis, Carsten Reich, Jan Thesing, Detlef Winter GOM Gesellschaft für Optische Messtechnik mbh, Mittelweg 7, 38106 Braunschweig, Germany

More information

MET 306 Activity 6. Using Pro/MFG Milling Operations Creo 2.0. Machining a Mast Step

MET 306 Activity 6. Using Pro/MFG Milling Operations Creo 2.0. Machining a Mast Step Using Pro/MFG Milling Operations Creo 2.0 Machining a Mast Step If the Trim option is grayed out when trimming the mill volume, Save (making sure the.asm file is going to the correct subdirectory), Exit

More information

CNC 8055 / CNC 8055i SELF-TEACHING MANUAL ( TC OPTION) (REF 0607) (Ref 0607)

CNC 8055 / CNC 8055i SELF-TEACHING MANUAL ( TC OPTION) (REF 0607) (Ref 0607) CNC 8055 / CNC 8055i (REF 0607) SELF-TEACHING MANUAL ( TC OPTION) (Ref 0607) All rights reserved. No part of this documentation may be copied, transcribed, stored in a data backup system or translated

More information

Automotive Manufacturing Technology

Automotive Manufacturing Technology 76 Location: Patterson Campus - Bldg. Q Program Information is a rapidly growing career in one of Alabama s highest-growth industries, automotive manufacturing. With high demand for skilled workers in

More information

Teaching with Fanuc Certified Education CNC Training On-Line Content

Teaching with Fanuc Certified Education CNC Training On-Line Content Teaching with Fanuc Certified Education CNC Training On-Line Content Thank you for deciding to use our on-line content to help you teach your CNC classes. We hope you find that it streamlines your teaching

More information

TECHNICAL DESCRIPTION

TECHNICAL DESCRIPTION TECHNICAL DESCRIPTION cnc milling WorldSkills International TD07 v4.0 WSC2013 WorldSkills International, by a resolution of the Technical Committee and in accordance with the Constitution, the Standing

More information

Industrial Design Technology

Industrial Design Technology INFORMATION & APPLICATION GUIDE Industrial Design Technology Associate of Applied Science in Industrial Design Technology Certificate of Completion in Industrial Design Technology: SolidWorks Design Specialist

More information

Chapter 6 Machining Center Carbide Insert Fundamentals

Chapter 6 Machining Center Carbide Insert Fundamentals This sample chapter is for review purposes only. Copyright The Goodheart-Willcox Co., Inc. All rights reserved. N10G20G99G40 N20G96S800M3 N30G50S4000 N40T0100M8 N50G00X3.35Z1.25T0101 N60G01X3.25F.002 N70G04X0.5

More information

2010 CATIA V5 CAM EĞĐTĐMLERĐ ĐÇERĐĞĐ

2010 CATIA V5 CAM EĞĐTĐMLERĐ ĐÇERĐĞĐ CATIA V5 CAM EĞĐTĐMLERĐ ĐÇERĐĞĐ CATIA V5 CAM GĐRĐŞ EĞĐTĐMĐ (1 Gün) 1) Manufacturing Workbench Presentation Workbench Introduction Process Presentation Manufacturing Terminology Manufacturing Workbench

More information

Basic 2D Design Be sure you have the latest information!

Basic 2D Design Be sure you have the latest information! Basic 2D Design mastercam x getting started tutorials Basic 2D Design December 2011 Be sure you have the latest information! Information might have been changed or added since this document was published.

More information

TruLaser Tube: Optimal tube. and. profile cutting. Machine Tools / Power Tools Laser Technology / Electronics Medical Technology

TruLaser Tube: Optimal tube. and. profile cutting. Machine Tools / Power Tools Laser Technology / Electronics Medical Technology TruLaser Tube: Optimal tube and profile cutting Machine Tools / Power Tools Laser Technology / Electronics Medical Technology Giving you the edge in laser tube processing. The TRUMPF Group ranks among

More information

1001 Business Center Drive Mount Prospect, IL 60056-2181 Toll Free: (800) 950-5202 Phone: (847) 635-0044 Fax: (847) 635-7866

1001 Business Center Drive Mount Prospect, IL 60056-2181 Toll Free: (800) 950-5202 Phone: (847) 635-0044 Fax: (847) 635-7866 1001 Business Center Drive Mount Prospect, IL 60056-2181 oll Free: (800) 950-5202 Phone: (847) 635-0044 Fax: (847) 635-7866 http://www.sumicarbide.com Sumitomo offers advanced milling, drilling, and hard

More information

5-Axis Test-Piece Influence of Machining Position

5-Axis Test-Piece Influence of Machining Position 5-Axis Test-Piece Influence of Machining Position Michael Gebhardt, Wolfgang Knapp, Konrad Wegener Institute of Machine Tools and Manufacturing (IWF), Swiss Federal Institute of Technology (ETH), Zurich,

More information

SEMAE3221 Machining aircraft components using CNC milling machines

SEMAE3221 Machining aircraft components using CNC milling machines Machining aircraft components using CNC milling machines Overview This standard identifies the competences you need to operate Computer Numerical Control (CNC) three axis or five axis machines or CNC machining

More information

CNC Applications. Programming Arcs

CNC Applications. Programming Arcs CNC Applications Programming Arcs Why Program Arcs? Many components have radius features which require machining. Arc programming on turning centers eliminates the need for form tools and results in a

More information

Dev eloping a General Postprocessor for Multi-Axis CNC Milling Centers

Dev eloping a General Postprocessor for Multi-Axis CNC Milling Centers 57 Dev eloping a General Postprocessor for Multi-Axis CNC Milling Centers Mihir Adivarekar 1 and Frank Liou 1 1 Missouri University of Science and Technology, liou@mst.edu ABSTRACT Most of the current

More information

Specifications for a Precision CNC Vertical Machining Center. Section I. Mechanical Performance Specifications (must meet or exceed)

Specifications for a Precision CNC Vertical Machining Center. Section I. Mechanical Performance Specifications (must meet or exceed) Specifications for a Precision CNC Vertical Machining Center Introduction The Naval Research Laboratory Vacuum Electronics Branch requires a high precision computer numerically controlled (CNC) vertical

More information

The PTC Creo Suite of NC and Tooling Solutions

The PTC Creo Suite of NC and Tooling Solutions The PTC Creo Suite What you need to capitalize on global manufacturing excellence of NC and Tooling Solutions To gain a competitive edge in product development, companies are increasingly leveraging globally

More information

Automation of CNC Program Generation

Automation of CNC Program Generation Automation of CNC Program Generation In a typical product manufacturing industry, there is a long lead time involved starting from the manufacturing plant layout, machine setup, product machining in CNC

More information

SHIMS STAMPINGS MACHINED COMPONENTS

SHIMS STAMPINGS MACHINED COMPONENTS SHIMS STAMPINGS MACHINED COMPONENTS The Spirol Concept WE ARE SHORT-RUN PRODUCTION SPECIALISTS Our objective is to provide our customers with the highest quality, short run stamped and machined components,

More information

CNC Applications Speed and Feed Calculations

CNC Applications Speed and Feed Calculations CNC Applications Speed and Feed Calculations Photo courtesy ISCAR Metals. Turning Center Cutters What types of cutters are used on CNC turning Centers? Carbide (and other hard materials) insert turning

More information

High productivity part manufacturing

High productivity part manufacturing www.siemens.com/plm/nx/cam High productivity part manufacturing NX CAM a complete solution for making better parts faster www.siemens.com/plm The NX CAM advantage How does NX software help you make better

More information

About Us HAAS Tooling for CNC Turning Centers

About Us HAAS Tooling for CNC Turning Centers About Us WHO IS EPPINGER? Eppinger CNC tool holders to DIN 69880 are manufactured to precision levels far in excess of the required standards using advanced, patented produciton systems and facilities.

More information

Mastercam X6 Basic 3D Design

Mastercam X6 Basic 3D Design Basic 3D Design mastercam x getting started tutorials Mastercam X6 Basic 3D Design December 2011 Be sure you have the latest information! Information might have been changed or added since this document

More information

Milling Milling milling cutter milling machines 1

Milling Milling milling cutter milling machines 1 Milling Milling is a basic machining process by which a surface is generated progressively by the removal of chips from a workpiece as it is fed to a rotating cutter in a direction perpendicular to the

More information

SmartCut EVS Series CNC Mills Combination of CNC technology and manual capability SC EVS-350B CNC SC EVS-550B CNC

SmartCut EVS Series CNC Mills Combination of CNC technology and manual capability SC EVS-350B CNC SC EVS-550B CNC Summit Machine Tool Manufacturing L.L.C. SmartCut EVS Series CNC Mills Combination of CNC technology and manual capability SC EVS-350B CNC SC EVS-550B CNC Summit Machine Tool Manufacturing L.L.C. SmartCut

More information

Precise heavy-duty cutting

Precise heavy-duty cutting PR 130 / PR 150 / PR 160 / PR 180 / PR 200 / PR 260 Precise heavy-duty cutting P-SERIES K-SERIES T-SERIES MILLFORCE 02 / Fields of application 03 / Machine concept 04 / Machine technology 05 / Options

More information

CNC Vertical Machining Center V-Mill CNC Large box-way and linear guide way machines

CNC Vertical Machining Center V-Mill CNC Large box-way and linear guide way machines CNC Vertical Machining Center Large box-way and linear guide way machines Technical Datasheet CNC Vertical Machining Center Large box-way and linear guide way machines Spindle gear drive (50-taper) for

More information

Machine Tool Control. Besides these TNCs, HEIDENHAIN also supplies controls for other areas of application, such as lathes.

Machine Tool Control. Besides these TNCs, HEIDENHAIN also supplies controls for other areas of application, such as lathes. Machine Tool Control Contouring controls for milling, drilling, boring machines and machining centers TNC contouring controls from HEIDENHAIN for milling, drilling, boring machines and machining centers

More information

Productivity+ Active Editor Pro probe software for machine tools

Productivity+ Active Editor Pro probe software for machine tools Productivity+ Active Editor Pro Productivity+ Active Editor Pro probe software for machine tools Enabling enables intelligent machining and green button production processes Flexible for a wide range of

More information

TECHNICAL DESCRIPTION. WorldSkills International TD07 v5.1 WSC2015 CNC MILLING MANUFACTURING AND ENGINEERING TECHNOLOGY

TECHNICAL DESCRIPTION. WorldSkills International TD07 v5.1 WSC2015 CNC MILLING MANUFACTURING AND ENGINEERING TECHNOLOGY TECHNICAL DESCRIPTION WorldSkills International TD07 v5.1 WSC2015 MANUFACTURING AND ENGINEERING TECHNOLOGY WorldSkills International, by a resolution of the Technical Committee and in accordance with the

More information

SEMMME2-20 - SQA Unit Code H2AB 04 Operating CNC Milling Machines

SEMMME2-20 - SQA Unit Code H2AB 04 Operating CNC Milling Machines Overview This unit identifies the competences you need to operate Computer Numerical Control (CNC) three-axis or multi-axis machines, or CNC machining centres, in accordance with approved procedures. You

More information

Success story. OPEN MIND Cuts a Path To Success In The UK Aero Industry

Success story. OPEN MIND Cuts a Path To Success In The UK Aero Industry OPEN MIND Cuts a Path To Success In The UK Aero Industry The global aerospace industry is undoubtedly at the leading edge of innovation and technology and CAM/CAD developers OPEN MIND Technologies AG is

More information

TECHNICAL DESCRIPTION CNC Turning

TECHNICAL DESCRIPTION CNC Turning TECHNICAL DESCRIPTION CNC Turning international 2010 WorldSkills International TD06 v3.0 WSC2011 WorldSkills International, by a resolution of the Technical Committee and in accordance with the Constitution,

More information

Precision Cutting. Confidence at the Router. Intelligent Machining. Powerful Part Modeling. Dependable Toolpath Verification

Precision Cutting. Confidence at the Router. Intelligent Machining. Powerful Part Modeling. Dependable Toolpath Verification Precision Cutting Intelligent Machining Confidence at the Consumer Furniture Fabrication Sculpture Cabinetry Powerful Part Modeling As the world s most widely-used CAM software,* Mastercam is dedicated

More information

XCal-View user manual

XCal-View user manual XCal-View user manual XCal-View user manual M-9925-0107-04 1 Introduction to XCal-View About XCal-View Renishaw XCal-View software has been written as a direct replacement for the previous analysis package

More information

Surface Machining. NATIONAL INSTITUTE FOR AVIATION RESEARCH Wichita State University. Revision 5.13 Copyright 2004. All rights reserved.

Surface Machining. NATIONAL INSTITUTE FOR AVIATION RESEARCH Wichita State University. Revision 5.13 Copyright 2004. All rights reserved. Surface Machining NATIONAL INSTITUTE FOR AVIATION RESEARCH Wichita State University Revision 5.13 Copyright 2004. All rights reserved. www.cadcamlab.org None of this material may be reproduced, used or

More information

Tips on Designing Cost Effective Machined Parts

Tips on Designing Cost Effective Machined Parts Tips on Designing Cost Effective Machined Parts By Joe Osborn, Founder, OMW Corporation (www.omwcorp.com, a cnc machine shop), and Adjunct Faculty Member in Metals Technology at the College of Marin. Copyright(c)2006.

More information

Computer Aided Design (CAD), ME 530.414, JHU Professor Dan Stoianovici, dss@jhu.edu

Computer Aided Design (CAD), ME 530.414, JHU Professor Dan Stoianovici, dss@jhu.edu Computer Aided Design (CAD), ME 530.414, JHU Professor Dan Stoianovici, dss@jhu.edu COURSE DESCRIPTION: The course outlines modern solid modeling design, analysis, simulation, and manufacturing of mechanical

More information

8.1 HPC for improved efficiency on standard machine tools by using new fluid-driven spindles

8.1 HPC for improved efficiency on standard machine tools by using new fluid-driven spindles 8.1 HPC for improved efficiency on standard machine tools by using new fluid-driven spindles A. Schubert 1, O. Harpaz 2, B. Books 2, U. Eckert 1, R. Wertheim 1 1 Fraunhofer IWU, Reichenhainer Str. 88,

More information

NX CAD/CAM 3-Axis Milling Foundation

NX CAD/CAM 3-Axis Milling Foundation CAD/CAM 3-Axis Milling Foundation NX CAM benefits Automated hole making capability speeds common processes Boundary-based cutting provides flexibility to cut on minimal geometry Solids-based cutting cuts

More information

Lesson 4: Surface Area

Lesson 4: Surface Area Lesson 4: Surface Area Selected Content Standards Benchmark Assessed M.3 Estimating, computing, and applying physical measurement using suitable units (e.g., calculate perimeter and area of plane figures,

More information

Fabrication of Printed Circuit Boards Using a Table Top CNC Mill

Fabrication of Printed Circuit Boards Using a Table Top CNC Mill Fabrication of Printed Circuit Boards Using a Table Top CNC Mill by Christopher F. Departmental Engineer, New Mexico State University, Department of Engineering Technology and Surveying Engineering PO

More information

Module 7. Plumber: Sink Installation

Module 7. Plumber: Sink Installation Module 7 Plumber: Sink Installation 138 The picture below shows a sample sink installation station. 139 Module 7 Plumber: Sink Installation Module Overview This module will involve the proper setup and

More information

CAD / CAM Dr. P. V. Madhusuthan Rao Department of Mechanical Engineering Indian Institute of Technology, Delhi Lecture No. # 12 Reverse Engineering

CAD / CAM Dr. P. V. Madhusuthan Rao Department of Mechanical Engineering Indian Institute of Technology, Delhi Lecture No. # 12 Reverse Engineering CAD / CAM Dr. P. V. Madhusuthan Rao Department of Mechanical Engineering Indian Institute of Technology, Delhi Lecture No. # 12 Reverse Engineering So what we will do in today s lecture is basically take

More information

MassMEP Course Descriptions for Workforce Training Fund Manufacturing Consortium Grants MANUFACTURING CONSORTIUM TRAINING COURSES

MassMEP Course Descriptions for Workforce Training Fund Manufacturing Consortium Grants MANUFACTURING CONSORTIUM TRAINING COURSES MANUFACTURING CONSORTIUM TRAINING COURSES Shown below are the course descriptions tentatively scheduled for the 2013/2014 Southern Worcester County Manufacturing Consortium. Basic Manufacturing Skills

More information

Lathe Series Training Manual. Live Tool for Haas Lathe (including DS)

Lathe Series Training Manual. Live Tool for Haas Lathe (including DS) Haas Factory Outlet A Division of Productivity Inc Lathe Series Training Manual Live Tool for Haas Lathe (including DS) Created 020112-Rev 121012, Rev2-091014 This Manual is the Property of Productivity

More information

Lesson 1 Basic Machining Practices Required For CNC Machining Centers

Lesson 1 Basic Machining Practices Required For CNC Machining Centers Get Ready To Learn About CNC Machining Centers Lesson 1 Lesson 1 Basic Machining Practices Required For CNC Machining Centers The more a person knows about the basic machining practices that apply to CNC

More information

Robotics ABB Robotics Laser Cutting Software High precision laser cutting made easy - Greater manufacturing flexibility at lower capital investment

Robotics ABB Robotics Laser Cutting Software High precision laser cutting made easy - Greater manufacturing flexibility at lower capital investment Robotics ABB Robotics Laser Cutting Software High precision laser cutting made easy - Greater manufacturing flexibility at lower capital investment Robotic laser cutting Overview Allows for the increased

More information

TEACHING TOMORROW S INDUSTRY LEADERS TODAY. Manufacturing Small Parts on Machining Centers

TEACHING TOMORROW S INDUSTRY LEADERS TODAY. Manufacturing Small Parts on Machining Centers TEACHING TOMORROW S INDUSTRY LEADERS TODAY Tech Tip # 14 July 2007 Written by: Phil Rasey, Stiles Education s Machining Center Specialist Audience: Introductory Machine \ Process: CNC Machining Centers

More information

Mill Series Training Manual. Haas CNC Mill Programming

Mill Series Training Manual. Haas CNC Mill Programming Haas Factory Outlet A Division of Productivity Inc Mill Series Training Manual Haas CNC Mill Programming Revised 042814 (Printed 04-2014) This Manual is the Property of Productivity Inc The document may

More information

Volumetric Compensation System

Volumetric Compensation System Volumetric Compensation System for SINUMERIK 840D sl January 2009 Geometric Errors 2009-01-22 Slide 2/65 Geometric Errors in Machine Tools Notice! If you cannot view the videos, proceed as follows: 1.Start

More information

Virtual Training Centre for CNC: An Accomplished Cooperation Case

Virtual Training Centre for CNC: An Accomplished Cooperation Case Virtual Training Centre for CNC: An Accomplished Cooperation Case Prof. Dr. Süleyman Yaldiz Technical Science College, Selcuk University, Konya, Turkey syaldiz@selcuk.edu.tr Abstract Recently cooperation

More information

MILLPWR Setup Access Code

MILLPWR Setup Access Code MILLPWR Setup Access Code An access code must be entered before the installation setup parameters can be accessed or changed. IMPORTANT The access code is 8891. Refer to Section 7, Setup. IMPORTANT Supervisors

More information

Lead Screw Backlash and Mach3, version 2

Lead Screw Backlash and Mach3, version 2 Lead Screw Backlash and Mach3, version 2 By R. G. Sparber Copyleft protects this document. 1 This article looks closely at backlash and then explains how to measure it. The resulting numbers are used in

More information

Milling and turning with SINUMERIK: CNC solutions for the shopfloor

Milling and turning with SINUMERIK: CNC solutions for the shopfloor Milling and turning with SINUMERIK: CNC solutions for the shopfloor 15 CONTENTS Shopfloor solutions for CNC machines with SINUMERIK solution line... 3 Milling with the 840D sl and ShopMill Flexible for

More information

Working with Machine and Control Definitions

Working with Machine and Control Definitions Working with Machine and Control Definitions This document is designed to be a companion to the Working with Machine and Control Definition set of videos that was introduced in January 2006. The first

More information

Milling. COPYRIGHT 2008, Seco Tools AB 1/111

Milling. COPYRIGHT 2008, Seco Tools AB 1/111 Milling 1/111 2/111 Milling A simple choice! Experts required? No Just follow some basic rules. 3/111 Face milling 4/111 Square shoulder milling 5/111 Disc milling 6/111 Copy milling 7/111 Plunge milling

More information

HUMBER COLLEGE. Mechanical Engineering Technician Co-op

HUMBER COLLEGE. Mechanical Engineering Technician Co-op HUMBER COLLEGE Mechanical Engineering Technician Co-op Courses Required COMM 213 Technical Communications 1 3 MECH 106 Workshop Practice 0 MECH 120 Blueprint Reading Freehand Sketching 4 MECH 207 Engineering

More information

Robert Flynn, Todd Rudberg, Justin Stamen Electroimpact, Inc.

Robert Flynn, Todd Rudberg, Justin Stamen Electroimpact, Inc. Automated Fiber Placement Machine Developments: Modular Heads, Tool Point Programming and Volumetric Compensation Bring New Flexibility in a Scalable AFP Cell. Robert Flynn, Todd Rudberg, Justin Stamen

More information

Alphacam Art combines Vectric s Aspire artistic design software with the market leading Alphacam manufacturing software.

Alphacam Art combines Vectric s Aspire artistic design software with the market leading Alphacam manufacturing software. Alphacam Art Alphacam Art - CNC Routing For Artists & Ideal Jewellery Cad Cam Software Alphacam Art combines Vectric s Aspire artistic design software with the market leading Alphacam manufacturing software.

More information

Multi-Functional Machine Tool

Multi-Functional Machine Tool A SEMINAR ON Multi-Functional Machine Tool UNDER GUIDENCE OF: Dr. B. Koti Veerachari NIT Warangal PRESENTED BY: Manoj Kumar Poddar (Manufacturing Engg.) M.Tech (1 ST Sem) ROLL NO ME093111 CONTENTS Introduction

More information

http://www.180skills.com/

http://www.180skills.com/ http://www.180skills.com/ Revised April 2012 Copyright 2012 180 Skills LLC All Rights Reserved This document and its content is copyright of 180 Skills LLC 2011. All rights reserved. Any redistribution

More information

PRINCIPLES OF MACHINING

PRINCIPLES OF MACHINING COURSE DESCRIPTION Principles of Machining focuses on the essential principles that must be mastered for a person to be effective in manufacturing production work. The course is intended for students who

More information

Electron S.R.L. B55 CNC TRAINING MACHINES

Electron S.R.L. B55 CNC TRAINING MACHINES Electron S.R.L. Design Production & Trading of Educational Equipment B55 CNC TRAINING MACHINES Specifications may change without notice Page 1 of 12 File B55 MODULAR TRAINING SYSTEM FOR THE STUDY OF CNC

More information

VIRTUAL MACHINES IN EDUCATION CNC MILLING MACHINE WITH SINUMERIK 840D CONTROL SYSTEM

VIRTUAL MACHINES IN EDUCATION CNC MILLING MACHINE WITH SINUMERIK 840D CONTROL SYSTEM Advances in Science and Technology Research Journal Volume 8, No. 24, Dec. 2014, pages 32 37 DOI: 10.12913/22998624/564 Review Article VIRTUAL MACHINES IN EDUCATION CNC MILLING MACHINE WITH SINUMERIK 840D

More information

MITSUBISHI CNC M700V Series, M70 Series Simple programming function NAVI MILL / NAVI LATHE

MITSUBISHI CNC M700V Series, M70 Series Simple programming function NAVI MILL / NAVI LATHE MITSUBISHI CNC M700V Series, M70 Series Simple programming function NAVI MILL / NAVI LATHE U s e r Friendly Programming function with simple operation "NAVI MILL" "NAVI LATHE" ~Installed in M700V/M70 Series~

More information

Standard Operating Practice S.O.P. No. 52-10-005.0-00-001

Standard Operating Practice S.O.P. No. 52-10-005.0-00-001 Page 1 of 12 1.0 PURPOSE SAMPLE CASTING APPROVAL This specification documents the procedure and the requirements for the procurement of casting fixtures, gages and pattern equipment, approval of sample

More information

TUBULAR Holing and Slotting Of Casing

TUBULAR Holing and Slotting Of Casing TUBULAR Holing and Slotting Of Casing Holing and Slotting of Casing Introduction.................. 243-244 Slotting machines Hydraulic Handling System Holing Machines Deburring Pipe coating Banding QA

More information