Lab #1 Laboratory Safety
|
|
- Aron Paul
- 7 years ago
- Views:
Transcription
1 Page1 Lab #1 Objectives: Identify the locations of important safety information and equipment. Understand how to properly use safety equipment in the laboratory. Understand the importance of being prepared for working in the laboratory. Identify and properly use basic lab equipment. Understand your rights and responsibilities in the laboratory. Sign the agreements for Safety Rules and Rules for Eye Protection for the STEM Division at. I. Preparation The laboratory exercises for each laboratory must be read before the laboratory period. 1) You must wear your gloves AND safety glasses during all exercises involving laboratory equipment, chemicals, glassware and preserved specimens. 2) Use extra caution if you need to use your scalpel or scissors. 3) Ask the instructor for supervision when changing your scalpel blade. 4) DO NOT touch anything but your equipment, instruments, specimens, etc. with your gloves on (ie. Not your laboratory manual). - Prepare your reference materials before beginning the exercise - Remove your gloves if you need to make notes, turn pages, etc. There are two reasons to wear gloves: i) to protect yourself and others from harmful chemicals (do not contaminate your work area) ii) to prevent contamination of the chemicals 5) Check the location of safety materials within the laboratory. 6) *Always bring: safety glasses, laboratory exercises, textbook, GLOVES (several pairs!), dissection kit, unruled paper, pencil. AND Proper Shoes. You are always responsible for having these materials. 7) Be prepared to log on to the lab computers when necessary using your username and password. II. Laboratory Materials / Clean up. 1) The laboratory is to be left the same or cleaner than when you entered it. 2) You must disinfect your bench BEFORE you put any of your own materials on it. You do not want to contaminate your things. 3) All materials used by yourself and / or your group are to be put away properly before leaving.
2 Page2 Failing to do so may result in lost points for the laboratory. 4) Your equipment and bench should be cleaned and disinfected before leaving the laboratory. 5) You must take extra care not to clog the sinks. All large debris must be disposed of in the appropriate garbage bin before the tray is washed. Utilize the strainers and check for clogging. Use the appropriate waste containers. If you are not sure, ask your instructor. 6) You should disinfect your laboratory aprons before AND after using them. 7) When you are completely cleaned up the last thing you MUST do before you leave is wash your hands. For further information on emergency procedures please go to Delagate: III. Identify and Use Basic Lab Equipment 1) There are three groups of basic equipment displayed on the countertop: Waste Containers, Basic Bio Lab Equipment, and Dissection Kit. Use the table below to identify all the items in each group. 2) Answer the questions in Basic Lab Equipment section of the Report. Glass waste container Sharp object waste container Waste Containers Specimen waste container Chemical waste container
3 Page3 Beakers (250 ml, 100 ml) Graduated cylinders Basic Bio Lab Equipment Test tubes in Test tube rack Test Tube & Holder in Action Disposable pipette Chemical reagent and attached dropper in action Ruler and measurement Balance and measurement Thermometer and measurement
4 Page4 Dissection kit IV. Location of Safety Resources Nearest telephone: Emergency Telephone Numbers Emergency exits: Fire extinguisher: Emergency Shower: Emergency Kit: Eyewash station: Material safety data sheets: Fire alarm location: Additional Safety Instructions Microscope / station #
5 Page5 IV. STEM Division Student Biology Rules and Rules for Eye Protection You must read the following pages and understand your role in maintaining safety in the laboratory. Then sign both the Safety Rules and the Eyewear Rules and hand them in to your instructor. You must understand that you Will NOT be allowed to participate in the laboratory exercises without proper safety equipment or proper adherence to safety regulations in the laboratory. If you do not have the proper safety equipment or fail to follow the safety regulations, you will be asked to leave the laboratory.
6 Page6 DELAWARE COUNTY COMMUNITY COLLEGE DIVISION OF SCIENCE, TECHNOLOGY, ENGINEERING AND MATHEMATICS STUDENT BIOLOGY LABORATORY SAFETY RULES Purpose: It is the intention of the Delaware County Community College to provide its students, staff, and faculty with a safe laboratory environment. Since you will be performing laboratory activities that require the use of potentially dangerous equipment and/or materials, this list of Student Rules MUST be followed at all times. Your Instructor will explain these Rules to you BEFORE you perform your first laboratory activity. You will then sign one copy to be kept on file. You will also be given a second copy to keep as a constant reminder of the Rules and of your obligation to follow them. General Rules: 1. Be prepared for your work in the laboratory. Read all assigned procedures thoroughly before entering the laboratory. If you do not understand a direction or part of a procedure, ask your Instructor before proceeding. 2. Perform only those laboratory activities authorized by your Instructor. Never do anything in the laboratory that is not called for in the laboratory procedures or by your Instructor. 3. Horseplay, practical jokes, and pranks are dangerous, and are prohibited in the laboratory. 4. No student may enter or work in the laboratory without an Instructor present. 5. When first entering the laboratory, do not touch any equipment, chemicals, or other materials until you are instructed to do so. 6. Do not eat food, drink beverages, chew gum or tobacco, or apply cosmetics in the laboratory. 7. Any time chemicals, microorganisms, preserved specimens, heat, or glassware are used, students must wear approved laboratory eyewear that meets ANSI Z87.1 Standards, and contact lenses should not be worn. Approved laboratory eyewear is available for purchase in the Bookstore. You have been given a separate sheet that covers in detail our Rules Concerning Eye Protection in the Laboratory. 8. Dress properly during a laboratory activity. Long hair, dangling jewelry, and loose or baggy clothing are a hazard in the laboratory. Long hair must be tied back and dangling jewelry and loose or baggy clothing must be secured. Shoes must completely cover the foot. Sandals are not allowed. Laboratory aprons have been provided for your use and should be worn during laboratory activities. 9. Students are never permitted in the science storage rooms or preparation areas unless given specific permission by their Instructor. 10. Observe good housekeeping practices. Work areas should be kept clean and organized at all times. Bring only your laboratory instructions, worksheets, and/or reports to the work area. Other materials (books, purses, backpacks, etc.) should not be placed on the laboratory benches. 11. Keep your hands away from your face, eyes, mouth, and body while using chemicals, microorganisms, and preserved, living, or nonliving specimens. Wash your hands before and after performing all laboratory activities. Biology
7 Page7 12. Do not touch, taste, or smell any chemicals unless specifically instructed to do so. The proper technique for smelling chemical fumes will be demonstrated to you. 13. Make sure your hands are completely dry before touching any electrical plug or device. 14. When inserting or removing an electrical plug from a socket, grasp the plug rather than the cord. 15. Report damaged electrical equipment to your Instructor immediately. Look for such things as frayed cords, exposed wires, or loose connections. Do not use damaged electrical equipment. 16. Do not leave ongoing laboratory activities unattended. You will be assigned a laboratory station at which to work. Do not distract other students or interfere with the laboratory activities of others. 17. Be alert and proceed with caution at all times in the laboratory. Notify your Instructor immediately of any unsafe conditions you observe. 18. Report any accident (spill, breakage, etc.) or injury (cut, burn, etc.) to your Instructor immediately, no matter how trivial it may appear. If the Instructor is unable to respond, then contact the Nurse and/or Security for assistance. 19. Know the location and purpose of the Material Safety Data Sheets (MSDS) for the chemicals used in the laboratory. Ask your Instructor if you need help in understanding them. 20. If you are or think you might be pregnant, if you have a lowered immune response, or if you have any other health concerns, consult with your physician before performing any of the laboratory activities. A list of chemicals and/or microorganisms used in the course will be provided upon request. 21. Know the locations and operating procedures of all safety equipment including eyewash stations, safety shower, fire extinguishers, fire blanket, and spill kits. Know where the fire alarm and the exits are located. 22. Know what to do during a building evacuation. Specific Rules for the Biology Laboratory: 23. Handle all living specimens in a humane manner. 24. Any time bacteria cultures or preserved specimens are handled, in addition to approved laboratory eyewear that meets ANSI Z87.1 Standards, students must also wear gloves and aprons. 25. When using knives and other sharp instruments, always carry with their tips and points pointing down and away from you and others. Always cut away from your body. Never try to catch a falling sharp instrument. Grasp sharp instruments only by the handles. 26. Properly dispose of all biological and chemical wastes, as directed by your Instructor. Do not place into the regular trash receptacles. 27. Properly dispose of all disposable instruments and wearing apparel, as directed by your Instructor. Do not place into the regular trash receptacles. Biology
8 Page8 28. Properly dispose of all materials (toothpicks; cotton swabs; microscope slides & coverslips; paper towels; etc.) that have come into contact with any human body fluids (saliva; mucous from the tongue, throat, or inside the cheek; blood; etc.), as directed by your Instructor. Do not place into the regular trash receptacles. 29. Never use mouth suction to fill a pipet. Use a rubber bulb or a pipet pump. 30. If a chemical splashes onto your skin or face, immediately flush with running water from a sink. Use a safety shower if needed, or an eyewash station if the chemical got into your eyes. Notify your Instructor immediately. 31. Examine glassware before each use. Never use chipped, broken, or dirty glassware. 32. Never handle broken glassware with your bare hands. Use a brush and dustpan to clean up the glass, and then place into a designated disposal container. 33. Exercise care when using a gas burner or a hot plate. Keep at a safe distance, and do not reach over one that is being used. Turn the burner or hot plate off when not in use. 34. Heated glass or metal remains very hot for a long period of time, even after it appears to be cool. Allow it to cool completely before you pick it up with your bare hands, or else use tongs or heat-protective gloves. Agreement: I, (print full name) have read and agree to follow the Student Rules as explained to me by my Instructor and as set forth in this document. I realize that I must follow these Rules to ensure my own safety, as well as the safety of my fellow students, my Instructor, and other students, staff, and faculty. I also agree to follow any additional oral or written instructions that my Instructor may provide relative to a specific laboratory activity or situation. I am aware that any violation of these Rules on my part may result in my being asked to leave the laboratory, receiving a failing grade for the activity, and/or administrative withdrawal from the course. Student Signature Date Course & Section Number Biology
9 Page9 DELAWARE COUNTY COMMUNITY COLLEGE DIVISION OF SCIENCE, TECHNOLOGY, ENGINEERING AND MATHEMATICS RULES CONCERNING EYE PROTECTION IN THE LABORATORY General Rules: Any time chemicals, microorganisms, preserved specimens, heat, or glassware are used, students must wear approved laboratory eyewear that meets ANSI Z87.1 Standards, and contact lenses should not be worn. Approved laboratory eyewear is available for purchase in the Bookstore. Any violation of this Rule may result in the student being asked to leave the laboratory, receiving a failing grade for the activity, and/or administrative withdrawal from the course. Approved Laboratory Eyewear: All laboratory eyewear must meet ANSI Z87.1 Standards. Since normal prescription eyeglasses do not provide the same level of protection as required by the ANSI Standards, they can not be used instead of laboratory eyewear, although they may be worn under laboratory goggles. The type of laboratory eyewear that is used depends upon the nature of the hazards that will be encountered. When eyewear is required, the following will apply. Chemistry: All Other Disciplines: Chemical splash goggles are required. Either safety glasses with side shields or chemical splash goggles are required, depending upon the nature of the laboratory activity. Contact Lenses: Any time chemicals, microorganisms, preserved specimens, heat, or glassware are used, contact lenses should not be worn. If the student also owns prescription eyeglasses, they should be worn at these times instead of the contact lenses, with laboratory goggles covering them. The reason for this Rule is that there are unique dangers associated with the wearing of contact lenses in the laboratory. These include: Should a chemical splash to the eye occur, the chemical could be held under the contact lens and against the surface of the cornea, possibly causing permanent eye damage. Involuntary spasm of the eyelid, and the panicked nature of the victim who has the chemical splashed in his/her eye make removal of the contact lens virtually impossible. By the time the lens is removed, irreversible damage already may have occurred. In a situation where the victim is unconscious, people attempting to irrigate the victim s eyes may be unaware that the victim wears contact lenses. Given these dangers, if a student still chooses to wear contact lenses when chemicals, microorganisms, preserved specimens, heat, or glassware are used, OSHA, ANSI (American National Standards Institute), and the ACS (American Chemical Society) all agree that the wearers of contact lenses should wear appropriate eye protection, which is generally defined to be non-ventilated chemical splash goggles. Agreement: I, (print full name) have read and agree to follow the Rules Concerning Eye Protection in the Laboratory as explained to me by my Instructor and as set forth in this document. I realize that I must follow these Rules to ensure my own safety. I also agree to follow any additional oral or written instructions that my Instructor may provide relative to a specific laboratory activity or situation. I am aware that any violation of these Rules on my part may result in my being asked to leave the laboratory, receiving a failing grade for the activity, and/or administrative withdrawal from the course. Student Signature Date Course & Section Number 0904
10 Page10 DELAWARE COUNTY COMMUNITY COLLEGE DIVISION OF SCIENCE, TECHNOLOGY, ENGINEERING AND MATHEMATICS STUDENT BIOLOGY LABORATORY SAFETY RULES Purpose: It is the intention of the Delaware County Community College to provide its students, staff, and faculty with a safe laboratory environment. Since you will be performing laboratory activities that require the use of potentially dangerous equipment and/or materials, this list of Student Rules MUST be followed at all times. Your Instructor will explain these Rules to you BEFORE you perform your first laboratory activity. You will then sign one copy to be kept on file. You will also be given a second copy to keep as a constant reminder of the Rules and of your obligation to follow them. General Rules: 1. Be prepared for your work in the laboratory. Read all assigned procedures thoroughly before entering the laboratory. If you do not understand a direction or part of a procedure, ask your Instructor before proceeding. 2. Perform only those laboratory activities authorized by your Instructor. Never do anything in the laboratory that is not called for in the laboratory procedures or by your Instructor. 3. Horseplay, practical jokes, and pranks are dangerous, and are prohibited in the laboratory. 4. No student may enter or work in the laboratory without an Instructor present. 5. When first entering the laboratory, do not touch any equipment, chemicals, or other materials until you are instructed to do so. 6. Do not eat food, drink beverages, chew gum or tobacco, or apply cosmetics in the laboratory. 7. Any time chemicals, microorganisms, preserved specimens, heat, or glassware are used, students must wear approved laboratory eyewear that meets ANSI Z87.1 Standards, and contact lenses should not be worn. Approved laboratory eyewear is available for purchase in the Bookstore. You have been given a separate sheet that covers in detail our Rules Concerning Eye Protection in the Laboratory. 8. Dress properly during a laboratory activity. Long hair, dangling jewelry, and loose or baggy clothing are a hazard in the laboratory. Long hair must be tied back and dangling jewelry and loose or baggy clothing must be secured. Shoes must completely cover the foot. Sandals are not allowed. Laboratory aprons have been provided for your use and should be worn during laboratory activities. 9. Students are never permitted in the science storage rooms or preparation areas unless given specific permission by their Instructor. 10. Observe good housekeeping practices. Work areas should be kept clean and organized at all times. Bring only your laboratory instructions, worksheets, and/or reports to the work area. Other materials (books, purses, backpacks, etc.) should not be placed on the laboratory benches. 11. Keep your hands away from your face, eyes, mouth, and body while using chemicals, microorganisms, and preserved, living, or nonliving specimens. Wash your hands before and after performing all laboratory activities.
11 Page11 Biology Do not touch, taste, or smell any chemicals unless specifically instructed to do so. The proper technique for smelling chemical fumes will be demonstrated to you. 13. Make sure your hands are completely dry before touching any electrical plug or device. 14. When inserting or removing an electrical plug from a socket, grasp the plug rather than the cord. 15. Report damaged electrical equipment to your Instructor immediately. Look for such things as frayed cords, exposed wires, or loose connections. Do not use damaged electrical equipment. 16. Do not leave ongoing laboratory activities unattended. You will be assigned a laboratory station at which to work. Do not distract other students or interfere with the laboratory activities of others. 17. Be alert and proceed with caution at all times in the laboratory. Notify your Instructor immediately of any unsafe conditions you observe. 18. Report any accident (spill, breakage, etc.) or injury (cut, burn, etc.) to your Instructor immediately, no matter how trivial it may appear. If the Instructor is unable to respond, then contact the Nurse and/or Security for assistance. 19. Know the location and purpose of the Material Safety Data Sheets (MSDS) for the chemicals used in the laboratory. Ask your Instructor if you need help in understanding them. 20. If you are or think you might be pregnant, if you have a lowered immune response, or if you have any other health concerns, consult with your physician before performing any of the laboratory activities. A list of chemicals and/or microorganisms used in the course will be provided upon request. 21. Know the locations and operating procedures of all safety equipment including eyewash stations, safety shower, fire extinguishers, fire blanket, and spill kits. Know where the fire alarm and the exits are located. 22. Know what to do during a building evacuation. Specific Rules for the Biology Laboratory: 23. Handle all living specimens in a humane manner. 24. Any time bacteria cultures or preserved specimens are handled, in addition to approved laboratory eyewear that meets ANSI Z87.1 Standards, students must also wear gloves and aprons. 25. When using knives and other sharp instruments, always carry with their tips and points pointing down and away from you and others. Always cut away from your body. Never try to catch a falling sharp instrument. Grasp sharp instruments only by the handles. 26. Properly dispose of all biological and chemical wastes, as directed by your Instructor. Do not place into the regular trash receptacles. 27. Properly dispose of all disposable instruments and wearing apparel, as directed by your Instructor. Do not place into the regular trash receptacles. Biology
12 Page Properly dispose of all materials (toothpicks; cotton swabs; microscope slides & coverslips; paper towels; etc.) that have come into contact with any human body fluids (saliva; mucous from the tongue, throat, or inside the cheek; blood; etc.), as directed by your Instructor. Do not place into the regular trash receptacles. 29. Never use mouth suction to fill a pipet. Use a rubber bulb or a pipet pump. 30. If a chemical splashes onto your skin or face, immediately flush with running water from a sink. Use a safety shower if needed, or an eyewash station if the chemical got into your eyes. Notify your Instructor immediately. 31. Examine glassware before each use. Never use chipped, broken, or dirty glassware. 32. Never handle broken glassware with your bare hands. Use a brush and dustpan to clean up the glass, and then place into a designated disposal container. 33. Exercise care when using a gas burner or a hot plate. Keep at a safe distance, and do not reach over one that is being used. Turn the burner or hot plate off when not in use. 34. Heated glass or metal remains very hot for a long period of time, even after it appears to be cool. Allow it to cool completely before you pick it up with your bare hands, or else use tongs or heat-protective gloves. Agreement: I, (print full name) have read and agree to follow the Student Rules as explained to me by my Instructor and as set forth in this document. I realize that I must follow these Rules to ensure my own safety, as well as the safety of my fellow students, my Instructor, and other students, staff, and faculty. I also agree to follow any additional oral or written instructions that my Instructor may provide relative to a specific laboratory activity or situation. I am aware that any violation of these Rules on my part may result in my being asked to leave the laboratory, receiving a failing grade for the activity, and/or administrative withdrawal from the course. Student Signature Date Course & Section Number Biology
13 Page13 DELAWARE COUNTY COMMUNITY COLLEGE DIVISION OF SCIENCE, TECHNOLOGY, ENGINEERING AND MATHEMATICS RULES CONCERNING EYE PROTECTION IN THE LABORATORY General Rules: Any time chemicals, microorganisms, preserved specimens, heat, or glassware are used, students must wear approved laboratory eyewear that meets ANSI Z87.1 Standards, and contact lenses should not be worn. Approved laboratory eyewear is available for purchase in the Bookstore. Any violation of this Rule may result in the student being asked to leave the laboratory, receiving a failing grade for the activity, and/or administrative withdrawal from the course. Approved Laboratory Eyewear: All laboratory eyewear must meet ANSI Z87.1 Standards. Since normal prescription eyeglasses do not provide the same level of protection as required by the ANSI Standards, they can not be used instead of laboratory eyewear, although they may be worn under laboratory goggles. The type of laboratory eyewear that is used depends upon the nature of the hazards that will be encountered. When eyewear is required, the following will apply. Chemistry: All Other Disciplines: Chemical splash goggles are required. Either safety glasses with side shields or chemical splash goggles are required, depending upon the nature of the laboratory activity. Contact Lenses: Any time chemicals, microorganisms, preserved specimens, heat, or glassware are used, contact lenses should not be worn. If the student also owns prescription eyeglasses, they should be worn at these times instead of the contact lenses, with laboratory goggles covering them. The reason for this Rule is that there are unique dangers associated with the wearing of contact lenses in the laboratory. These include: Should a chemical splash to the eye occur, the chemical could be held under the contact lens and against the surface of the cornea, possibly causing permanent eye damage. Involuntary spasm of the eyelid, and the panicked nature of the victim who has the chemical splashed in his/her eye make removal of the contact lens virtually impossible. By the time the lens is removed, irreversible damage already may have occurred. In a situation where the victim is unconscious, people attempting to irrigate the victim s eyes may be unaware that the victim wears contact lenses. Given these dangers, if a student still chooses to wear contact lenses when chemicals, microorganisms, preserved specimens, heat, or glassware are used, OSHA, ANSI (American National Standards Institute), and the ACS (American Chemical Society) all agree that the wearers of contact lenses should wear appropriate eye protection, which is generally defined to be non-ventilated chemical splash goggles. Agreement: I, (print full name) have read and agree to follow the Rules Concerning Eye Protection in the Laboratory as explained to me by my Instructor and as set forth in this document. I realize that I must follow these Rules to ensure my own safety. I also agree to follow any additional oral or written instructions that my Instructor may provide relative to a specific laboratory activity or situation. I am aware that any violation of these Rules on my part may result in my being asked to leave the laboratory, receiving a failing grade for the activity, and/or administrative withdrawal from the course. Student Signature Date Course & Section Number 0904
14 Page14 Lab Report #1 Name: Basic Lab Equipment 1. Use a ruler to measure a disposable pipette. Record your result here: cm, which is equals to mm. 2. Use a balance to measure the weight of a disposable pipette. Record your result here: g, which is equal mg. 3. Read the volume of the solution in the graduated cylinder (displayed on the counter top). Record your result here: ml. 4. Read the thermometer placed in the solution (displayed on the counter top). Record your result here: C. 5. Refer to the dissection tools (displayed on the counter top) and provide their label: blunt point dissection probe is labelled ; disposable scalpel blade is labelled ; dissecting forceps is labelled. 6. Refer to the waste containers (displayed on the counter top), answer the following questions: used scalpels should be discarded into # container; chemical waste should be poured into # container; animal tissue waste should be collected in # container; broken test tubes or beakers should be discarded into # container. SCORE: / 13
15 Page15 Safety Quiz 1. Why should you be prepared for lab? 2. What does MSDS stand for? 3. Name one thing an MSDS tells you: 4. Name one reason you should wear goggles. 5. What should be the last thing you do before you leave the lab? 6. How do you know whether your goggles are approved? 7. What type of footwear is approved? 8. May you bring food into the laboratory? 9. How do you know where to dispose of hazardous materials? 10. Whom do you inform if you have ANY type of accident? 11. Where is the location of the eyewash station? 12. May you participate in the laboratory activities without appropriate apparel or safety equipment? 13. Can regular glasses or sunglasses substitute for safety glasses? 14. May you enter the laboratory without an instructor present? 15. Why do you clean your bench-top BEFORE you start your laboratory activities? SCORE: / 15
Parallel Circuits Charles Lang
SCIENCE EXPERIMENTS ON FILE Revised Edition 6.20-1 Parallel Circuits Charles Lang Topic Parallel circuits Time 1 1 2 hours! Safety Adult supervision is required. Please click on the safety icon to view
More informationUsing a Pendulum to Measure Gravity s Acceleration Elizabeth B. Chesick
SCIENCE EXPERIMENTS ON FILE Revised Edition 6.33-1 Using a Pendulum to Measure Gravity s Acceleration Elizabeth B. Chesick Topic Motion of a pendulum; gravity Time 1 2 hour! Safety Please click on the
More informationPENNY IN A CUP: DEMONSTRATING THE LAW OF INERTIA
PENNY IN A CUP: DEMONSTRATING THE LAW OF INERTIA Introduction Newton s (Sir Isaac Newton, English physicist, 1642 1727) First Law of Motion states that: An object at rest tends to stay at rest, and an
More informationSafety in the Chemistry Laboratory
Reference: Safety in Academic Chemistry Laboratories-Accident Prevention for College and University Students. A Publication of American Chemical Society Joint Board-Council Committee on Chemical Safety.
More informationConservation of Momentum Greg Kifer
SCIENCE EXPERIMENTS ON FILE Revised Edition 6.7-1 Conservation of Momentum Greg Kifer Topic Conservation of momentum Time 1 hour! Safety Please click on the safety icon to view the safety precautions.
More informationSafety in the Chemistry Laboratory General Safety Equipment Fire extinguisher Red fire alarm Fire blanket Safety shower Drench hose Eye wash station
Reference: Safety in Academic Chemistry Laboratories-Accident Prevention for College and University Students. A Publication of American Chemical Society Joint Board-Council Committee on Chemical Safety.
More informationLABORATORY & CHEMICAL SAFETY GUIDELINES. Dr. Mobin Shaikh Convener SAFETY COMMITTEE DISCIP INE OF CHEMISTRY SCHOOL OF BASIC SCIENCE
LABORATORY & CHEMICAL SAFETY GUIDELINES Presented by Dr. Mobin Shaikh Convener SAFETY COMMITTEE DISCIP INE OF CHEMISTRY DISCIPLINE SCHOOL OF BASIC SCIENCE INDIAN INSTITUTE OF TECHNOLOGY (IIT) INDORE SAFETY
More informationFORT SETTLEMENT MIDDLE SCHOOL SCIENCE SAFETY CONTRACT FBISD SCIENCE SAFETY CONTRACT FORT SETTLEMENT GRAPHING CALCULATOR CONTRACT
FORT SETTLEMENT MIDDLE SCHOOL SCIENCE SAFETY CONTRACT FBISD SCIENCE SAFETY CONTRACT FORT SETTLEMENT GRAPHING CALCULATOR CONTRACT Fort Settlement Middle School requires that all students participating in
More informationRespiration and Photosynthesis
Respiration and Photosynthesis Topic Plants and animals carry out cellular respiration, but only plants conduct photosynthesis. Introduction Cellular respiration is the process in which a cell uses oxygen
More informationSafety and Laboratory Procedures from the CWU Department of Chemistry CHEM 101 Laboratory Manual
CHEM 101, spring 2009 Safety and Laboratory Procedures from the CWU Department of Chemistry CHEM 101 Laboratory Manual Laboratory Safety Chemistry laboratories have certain inherent danger that students
More informationOccupational Health and Safety in the Laboratory (Undergraduate Students)
Occupational Health and Safety in the Laboratory (Undergraduate Students) Introduction and scope of the Guidelines These guidelines have been written for all laboratory practical classes at the University
More informationSeashells and Their Mollusk Inhabitants
Seashells and Their Mollusk Inhabitants Topic Seashells can generally be classified as the shells of either bivalves or gastropods. Introduction Seashells are the habitats of animals that belong to the
More informationPercentage of Water in Popcorn
Skills Practice DATASHEET FOR IN-TEXT LAB Percentage of Water in Popcorn Popcorn pops because of the natural moisture inside each kernel. When the internal water is heated above 100 C, the liquid water
More information5. Safety in the Chemical Laboratory
5. Safety in the Chemical Laboratory A considerable part of the work in an organic chemistry laboratory involves using materials and processes that can be dangerous if not properly handled. With careful
More informationThe following standard practices, safety equipment, and facility requirements apply to BSL-1:
Section IV Laboratory Biosafety Level Criteria The essential elements of the four biosafety levels for activities involving infectious microorganisms and laboratory animals are summarized in Table 1 of
More informationGEORGIA INSTITUTE OF TECHNOLOGY ENVIRONMENTAL HEALTH AND SAFETY PERSONAL PROTECTIVE EQUIPMENT
PURPOSE To protect the health and welfare of GEORGIA TECH employees in areas where there may be a risk of injury or exposure to hazardous substances or conditions employees who work in areas where physical
More informationK-State Entomology Department GOOD LABORATORY SAFETY PRACTICES
K-State Entomology Department GOOD LABORATORY SAFETY PRACTICES (Approved by the Entomology Faculty on December 13, 2000) The Department of Entomology at Kansas State University (KSU) is committed to providing
More informationSTEM FORENSICS ACADEMY
STEM FORENSICS ACADEMY PARENT KIT (8 pages) STEMversity, Inc. is pleased to present its STEM Forensics Academy for middle and high school students. DESCRIPTION The STEM Forensics Academy is an all-science
More informationSafety Guidelines and Rules of Conduct of the Cadaver Lab Mt San Antonio College Fall 2011
Safety Guidelines and Rules of Conduct of the Cadaver Lab Mt San Antonio College Fall 2011 Introduction History of Cadaver Dissection The study of human anatomy by means of cadaver dissection has a long
More informationBrock University Facilities Management Operating Procedures
Subject: Bodily Fluid Clean-Up Number: FMOP 2-3 Approval: Executive Director Issue Date: 22 Sep 08 Responsibility: Manager Custodial Services Review Period: 2 Years PROCEDURES FOR BODILY FLUID CLEAN-UP
More informationValor! Service! Integrity!
Parent Information Please read over this entire syllabus What is the Law & Justice Program? This program seeks to prepare students to work in careers like lawyers, judges, police, forensics, federal law
More informationHAMMOCKS MIDDLE SCHOOL Honors Physical Science
Name: Last First Period: HAMMOCKS MIDDLE SCHOOL Honors Physical Science Dear Parent/Guardian: Welcome to Honors Physical Science! I am very excited to be a part of your child s learning experience. This
More informationBiosafety Level 2 Criteria
Biosafety Level 2 Criteria Biosafety in Microbiological and Biomedical Laboratories (BMBL) 5th Edition Biosafety Level 2 (BSL-2): Biosafety Level 2 builds upon BSL-1. BSL-2 is suitable for work involving
More informationBloodborne Pathogens Program Revised July, 5 2012
Bloodborne Pathogens Program Revised July, 5 2012 Page 1 of 16 Table of Contents 1.0 INTRODUCTION...3 1.1 Purpose...3 1.2 Policy.3 2.0 EXPOSURE CONTROL METHODS 4 2.1 Universal Precautions.4 2.2 Engineering
More informationUNH SAFETY AUDIT Office of Environmental Health and Safety
UNH SAFETY AUDIT Office of Environmental Health and Safety Administrative Information Customized for each location. Ensure contact information on door caution signs is up to date. Doors YES NO N/A 1. The
More informationBasic Laboratory Safety
Basic Laboratory Safety Objectives: Upon completion of the lecture, accompanying video, required readings and clinical rotations, the student will be able to: 1) List and describe the appropriate safety
More informationBiosafety Guidelines. 5. Pipetting Mechanical pipetting devices must be available and used. Mouth pipetting is prohibited.
Biosafety Guidelines Biosafety Level 1 Laboratory Biosafety Level 1 is suitable for work involving well-characterized agents not known to consistently cause disease in immunocompetent adult humans, and
More informationPERSONAL PROTECTIVE EQUIPMENT (PPE)
Page 1 of 6 (PPE) Personal protective equipment (PPE) is used to protect an individual from hazards associated with their work tasks or environment. Specific types of personal protective equipment include
More informationCOMMON LABORATORY APPARATUS
COMMON LABORATORY APPARATUS Beakers are useful as a reaction container or to hold liquid or solid samples. They are also used to catch liquids from titrations and filtrates from filtering operations. Bunsen
More informationAdvanced Placement Chemistry
Advanced Placement Chemistry Course Syllabus 2014-2015 Mr. Callahan scallahan@tusd.net Course Description AP Chemistry is a college level chemistry course taken and taught with the goal of challenging
More informationCONTROLLING CROSS INFECTION IN THE DENTAL LABORATORY. Best Practice Guide
CONTROLLING CROSS INFECTION IN THE DENTAL LABORATORY Best Practice Guide Preparing to Work A separate work area shall be set aside in the laboratory to receive all incoming work. This should ideally be
More informationHazardous Waste Procedures
Hazardous Waste Procedures Hazardous waste is defined as a waste, or combination of wastes, which because of its quantity, concentration, or physical or chemical characteristics may pose a substantial
More informationBSL 1 Laboratory Biosafety Manual
BSL 1 Laboratory Biosafety Manual Version 1.0 Idaho State University, Office for Research Institutional Biosafety Committee (IBC) 1651 Alvin Ricken Drive, Pocatello, ID 83201-8046 Phone: 208-282-2179 Fax:
More informationHow do you digest milk? In this experiment you will test the ability of two substances, an acid and enzyme, to break down protein.
3.3 (page 1) Science Projects For ALL Students Digestion How do you digest milk? In this experiment you will test the ability of two substances, an acid and enzyme, to break down protein. Digestion is
More informationLaboratory Biosafty In Molecular Biology and its levels
Laboratory Biosafty In Molecular Biology and its levels Workshop 16-17 Oct..2012 Guidelines Does not mean optional Laboratory Biosafety The Laboratory Biosafety Manual is an important WHO publication
More informationCleaning of Laboratories
Cleaning of Laboratories Introduction Within the University cleaning staff are usually provided by Support Services Division of the Estates and Buildings Department, but arrangements may vary on different
More informationParticularly Hazardous Substances (PHS) Standard Operating Procedure (SOP)
Particularly Hazardous Substances (PHS) Standard Operating Procedure (SOP) Formaldehyde, formalin, paraformaldehyde solutions, and paraformaldehyde solids Principal Investigator: Room & Building #: Department:
More informationStandard Operating Procedure for a Chemical Spill
Standard Operating Procedure for a Chemical Spill Facility: Lab Director: Scope: ERC Clean Room C17 Engineering Research Complex Electrical and Computer Engineering Brian Wright 3234 Engineering 355-5233
More informationSchool Science Lab Safety Guidelines
School Science Lab Safety Guidelines Occupational Safety & Health Bureau Montana Department of Labor & Industry Prepared for Montana Employers by the Occupational Safety & Health Bureau Department of Labor
More informationBLOODBORNE PATHOGENS EXPOSURE CONTROL PLAN
BLOODBORNE PATHOGENS EXPOSURE CONTROL PLAN Facility Name: University of Arkansas at Little Rock Date of Preparation: 01-17-06 In accordance with the OSHA Bloodborne Pathogens Standard, 1910.1030, the following
More informationTITLE: Storage and Management of Hazardous Medications & Chemicals APPLIES TO: Pharmacy Staff
Administrative Policies and Procedures for MOH hospitals /PHC Centers NO. OF PAGES: ORIGINAL DATE: REVISION DATE : 1.0 PURPOSE 1.1 To develop a set of safety rules and regulations that address the identification,
More informationPS10 - Introduction to Laboratory Safety
PS10 - Introduction to Laboratory Safety General Safety Considerations A chemistry lab can be a dangerous place to work. There are flammable solvents, toxic and corrosive chemicals, electrical equipment,
More informationCarnegie Mellon University s Policy and Procedures for Recombinant and Synthetic Nucleic Acid Materials Spills
Carnegie Mellon University s Policy and Procedures for Recombinant and Synthetic Nucleic Acid Materials Spills Background In accordance with Section IV-B-2-b-(6) of the NIH Guidelines for Research Involving
More informationPrerequisites General biology (Biology 107 or 105 and 106) each with a grade of C or better.
BIO 230 HUMAN ANATOMY SYLLABUS CRN: 83043 SAN DIEGO MESA COLLEGE SPRING 2013 Instructor: Tim Plagge Email Address: tplagge@sdccd.edu Phone: (619) 388-2400 ext. 5450 Course Hours & Location Tuesday & Thursday
More informationAutoclave Safety. Autoclaves are sterilizers using high pressure and high temperature steam. The potential safety risks for the operators are:
Autoclave Safety Purpose: Sterilization refers to the complete killing of all living organisms, including spores. Common sterilization techniques include the application of wet heat, dry heat, chemicals,
More informationAppendix J IBC Biohazard Spill Management Plan
OVERVIEW Prevention is the most important part of any spill management plan. Be sure to read and understand standard operating procedures (SOP s) and protocols for safe manipulation of biohazards before
More informationBiosafety Level 2 (BSL-2) Safety Guidelines
BLS-4 Biosafety Level 2 (BSL-2) Safety Guidelines BSL-3 BSL-2 BSL-1 BSL-2 builds upon BSL-1. If you work in a lab that is designated a BSL-2, the microbes used pose moderate hazards to laboratory staff
More informationBiosafety Program University of Colorado. BSL-1 Audit Checklist
PI first name: PI last name: username: IBC application #: Inspection Date: Lab Location: Department: email: best lab contact lab contact email Inspected by: Time BSL-1 Yes BSL-2 Yes A. Contamination Control
More informationPI s Name Date Bldg./Rm# CDC Biosafety Level 3 (BSL-3)
PI s Name Date Bldg./Rm# CDC Biosafety Level 3 (BSL-3) Yes No 1. Is access to the laboratory limited or restricted at the discretion of the laboratory director when experiments are in progress? Yes No
More informationStandard Operating Procedure (SOP) Car/Truck Battery Safety
INTRODUCTION Lead-acid batteries contain sulfuric acid and only trained and authorized personnel should handle them. When talking about lead-acid batteries, people usually call sulfuric acid "battery acid"
More informationEMERGENCIES. Emergencies
Emergencies A good safety program, training, and use of precautions reduce the number and seriousness of accidents. Laboratory accidents can range from fires to chemical spills to spills and falls. Your
More informationBio 182 - A Journey through the Human Body (Part II)
Instructor: Dr. Ayanna Alexander-Street Office hours: Wednesday 12-1, Monday-Friday by appointment Office Location: Davis 113 E-mail: Ayanna.AlexanderStreet@lehman.cuny.edu Course Description: BIO 182:
More informationLaboratory Biosafety Level 3 Criteria
Laboratory Biosafety Level 3 Criteria Biosafety in Microbiological and Biomedical Laboratories (BMBL) 5th Edition Section IV Biosafety Level 3 (BSL-3): Biosafety Level 3 is applicable to clinical, diagnostic,
More informationJob Hazard/Safety Analysis For the Lab Worker
Job Hazard/Safety Analysis For the Lab Worker 1 INTRODUCTION Job Hazard/Safety Analysis for the Lab Worker is a partial list of known task performed by the professional laboratory worker. We have placed
More informationMicrobiology Lab Practices and Safety Rules
There is a certain element of risk in anything you do, but the potential risks in a microbiology course are greater. Persons who work in a microbiology lab may handle infectious agents in additional to
More informationSafe Handling of Cytotoxic Materials
Safe Handling of Cytotoxic Materials Kara Henman RN, MN, CON(C) Oncology Practice Consultant Cancer Care Nova Scotia What are hazardous drugs? Chemotherapy Immunosuppressive agents Biological agents Antiviral
More informationSafety introduction. In the event of fire and accidents, you have a responsibility to know the location of:
Safety introduction 2011-12-01 1 (7) Safety introduction General safety at the department A laboratory is a place with a lot of potential risks such as dangerous substances, sharp objects and electrical
More information15GAL STEEL OIL DRAIN WITH 110V PUMP
15GAL STEEL OIL DRAIN WITH 110V PUMP OWNER S MANUAL WARNING: Read carefully and understand all ASSEMBLY AND OPERATION INSTRUCTIONS before operating. Failure to follow the safety rules and other basic safety
More informationChemotherapy Spill Response:
Chemotherapy Spill Response: Antineoplastic Spills Outside Of A Fume Hood Lisa Hudley, RN Training Coordinator Safety & Environmental Compliance William Guess Director Safety & Environmental Compliance
More informationSection 11: T8:00-9:50
Course Syllabus Fall 2014 KP 223/ HN 210: Human Anatomy Laboratory Departments of Kinesiology, Health Science, Biology, Faculty of Science Wilfrid Laurier University Laboratory Coordinator / Instructor:
More information6.0 Infectious Diseases Policy: Student Exposure Control Plan
6.0 Infectious Diseases Policy: Student Exposure Control Plan 6.1 PURPOSE & SCOPE This exposure control plan has been established to define the infection control program for students of Pacific University.
More informationCleanroom Safety Training. 2 nd Edition, NR
Cleanroom Safety Training 2 nd Edition, NR All users must first complete the annual safety training offered through the WUSTL Environmental Health and Safety department. http://ehs.wustl.edu/training/pages/default.aspx
More informationPolicies. Prep Room Policies
Introduction INTRODUCTION The Microbiology Prep Room is located in 531A Life Sciences Building. The telephone number is 372-8609. It is open from 7:30 a.m. to 4:30 p.m. during the fall and spring semesters.
More informationEOSMS 204C Effective Date: 12/8/2014 Page 1 of 8
EOSMS 204C Effective Date: 12/8/2014 Page 1 of 8 1. Purpose This Standard Operating Procedure (SOP) establishes procedures for the safe handling, transportation and storage of (MC), which is also known
More informationTraining on Standard Operating Procedures for Health Care Waste Management Swaziland 12 May, 2011
Training on Standard Operating Procedures for Health Care Waste Management Swaziland 12 May, 2011 Safe Infectious Waste Handling and Transport Objective Waste Overview Roles and Responsibilities of Waste
More informationBiological Safety Program
Risk Management & Safety Main Office, Wyoming Hall Phone: (307) 766-3277 Fax: (307)766-6116 Regulated Materials Management Center Phone: (307)766-3696 Fax: (307)766-3699 Web: www.uwyo.edu/ehs Email: UWEHS@uwyo.edu
More informationManagement Plan For Control of Blood-borne Pathogens, Infectious Wastes and Other Potentially Hazardous Biological Agents
Management Plan For Control of Blood-borne Pathogens, Infectious Wastes and Other Potentially Hazardous Biological Agents 1.0 Executive Summary 1.1 The Bloodborne Pathogen standard, initiated by OSHA,
More informationCurtain Guards Made of PVC and designed to protect the operator from the risk of airborne chips or tool fragments.
Two General Safety Rule for CNC Machines Never operate a CNC machine without proper training or consulting the specific operator's manual for that particular machine and control type. Never attempt to
More informationBiosafety Spill Response Guide
Yale University Office of Environmental Health & Safety Biosafety Spill Response Guide Office of Environmental Health & Safety 135 College Street, 1 st Floor, New Haven, CT 06510 Telephone: 203-785-3550
More informationSafety, Cleaning, and Chemical Disposal Procedures
Safety, Cleaning, and Chemical Disposal Procedures 1. Using Acids At many points in the fabrication process strong acids are used as etchants. These cause severe burns if kept in contact with your skin
More informationVersion: 1.0 Revision Date: 06/25/2013 Print Date: 06/25/2013 POOL TIME D.E. FILTER POWDER
SECTION 1. PRODUCT AND COMPANY IDENTIFICATION Product name: Product Use Description: Recreational Water Product Chemical nature: Silica Company: Recreational Water Products Pool Time PO Box 1449 Buford,
More informationMercyhurst University Athletic Training Program Bloodborne Pathogens Exposure Control Plan
Mercyhurst University Athletic Training Program Bloodborne Pathogens Exposure Control Plan In accordance with the Occupational Safety Health Administration (OSHA) Bloodborne Pathogens Standard, 29 CFR
More informationIf you have any questions about how to safely undertake a task or project, ask your supervisor before you begin.
Laboratory Health and Safety Manual Section 1: Introduction and Objectives This manual provides a set of minimum standards and practices for the safe and healthy operation of a laboratory. Following the
More informationLab Biosafety Level 3 Checklist (dates: April 16, 1998)
Lab Biosafety Level 3 Checklist (dates: April 16, 1998) Date: Location: Responsible Official: Project Title: Inspector: These questions are based on the Biosafety Level 3 section of Biosafety in Microbiological
More informationTEMPLE UNIVERSITY ENVIRONMENTAL HEALTH AND RADIATION SAFETY
Page 1 of 7 ISSUED: 5/00 REVISED: 08/06 1. Potential Releases of Radioactive Materials to Unrestricted Areas The Environmental Health and Safety Department (EHRS) must be notified immediately if an emergency
More information#10 Introduction to the Chemistry Lab: Safety Comes First Sharyl A. Majorski, Central Michigan University, Mount Pleasant, MI 48859
#10 Introduction to the Chemistry Lab: Safety Comes First Sharyl A. Majorski, Central Michigan University, Mount Pleasant, MI 48859 INTRODUCTION Description Students will have the opportunity to gain a
More informationUltrasonic support removal tank
Ultrasonic support removal tank User guide and safety manual See inside for use and safety information. The Ultrasonic support removal tank automatically removes PLA support material from a printed ABS
More informationCHEM 124L Syllabus General Organic and Biochemistry Lab Summer 2015
CHEM 124L Syllabus General Organic and Biochemistry Lab Summer 2015 Instructor: Office Hours: Text: Frank Tyminski, MEYR 564, x 52552, tyminski@umbc.edu By appointment Bettelheim, Frederick A. and Joseph
More informationTHE UNIVERSITY OF NEWCASTLE- SCHOOL of BIOMEDICAL SCIENCES
Page: 1 of 7 1. Purpose: 1.1. To describe the procedures to be used when dealing with chemical or microbiological spills. 2. Equipment: 2.1. Spill Kit 2.2. Miscellaneous items as listed 3. Materials: 3.1.
More informationBLOODBORNE PATHOGENS EXPOSURE CONTROL PROGRAM
BLOODBORNE PATHOGENS EXPOSURE CONTROL PROGRAM Purpose: The purpose of this program is to eliminate or minimize employee and student exposure to blood and other potentially infectious materials. This exposure
More informationOESO Ergonomics Division...919-668-ERGO(3746) Duke Police...919-684-2444 Corporate Risk Management... 919-684-6226
Musculoskeletal Disorders (MSDs) Develop over time and can take a long time to heal Can be quite painful and reduce overall effectiveness and efficiency Occur in any part of the body A variety of risk
More informationBLOODBORNE PATHOGENS IN SCHOOLS
BLOODBORNE PATHOGENS IN SCHOOLS INTRODUCTION As sure as children fall while learning to walk, students experience cuts, bruises and other injuries. In times past, little thought was given to treatment
More informationLaboratory Safety Inspection Checklist (Biology and Biochemistry)
EOSMS 201-1A Date: 11/15/14 Page 1 of 9 Building Room Inspection Date Department Principal Investigator(s) Inspector(s) Instructions: This form is to be completed for laboratory self-inspection. Complete
More informationTABLE OF CONTENTS. Page I. Purpose 5
TABLE OF CONTENTS Page I. Purpose 5 II. Definitions 5 a.! Chemical Hygiene Plan 5 b.! Employee 5 c.! Hazardous Chemical 5 d.! Laboratory 5 e.! Laboratory Scale 5 III. Applicability and Assistance 5 IV.!
More informationSafety Resources from
Safety Resources from Sample Safety Program TABLE OF CONTENTS I. DECLARATION OF POLICY II. DUTIES AND RESPONSIBILITIES III. SAFETY COMMITTEE IV. PROGRAM REINFORCEMENT V. CORPORATE DRUG POLICY VI. HAZARD
More informationResponse to Biological Spills in the Laboratory (Intentional or Accidental)
Response to Biological Spills in the Laboratory (Intentional or Accidental) Exposure Management For splash to eyes, mucous membranes, or broken area of the skin Irrigate eyes with clean water, saline or
More informationOnline Chemistry Course (OLCC) Chemical Safety: Protecting Ourselves And Our Environment
Online Chemistry Course (OLCC) Chemical Safety: Protecting Ourselves And Our Environment Paper: 9 Discussion: October 30 November 6, 2004 Title: How Can I Prevent Laboratory Accidents? Author: Kathy Benedict
More informationUNIVERSITY OF NEVADA LAS VEGAS BSL-3 LABORATORY STANDARD OPERATING PROCEDURES (SOPS)
UNIVERSITY OF NEVADA LAS VEGAS BSL-3 LABORATORY STANDARD OPERATING PROCEDURES (SOPS) This SOP document should include specific information for the laboratories and procedures being performed. It is meant
More informationNCW and Community Activity SAFETY GUIDELINES
NCW and Community Activity SAFETY GUIDELINES These guidelines are based on the premise that all presenters care very much about the safety of their audiences and participants during demonstration shows
More informationAutomotive and Diesel Lab Safety Guidelines
Section A: Safety Training All new students shall receive safety training prior to performing lab activities. The training shall include: a. S/P2 Pollution Prevention including relevant EPA regulations,
More informationChemical Spill Response Guideline
ChemicalSpillResponseGuideline Despite the best efforts of researchers to practice safe science in the laboratory, accidents resulting in the release of chemicals will occur. For this reason, it is essential
More informationFiber Analysis 2005, 2004, 2003, 2001, 1999 by David A. Katz. All rights reserved.
Fiber Analysis 2005, 2004, 2003, 2001, 1999 by David A. Katz. All rights reserved. Fiber evidence can be found at crime scenes in a number of different ways. In personal contact between the clothing of
More informationHazardous Materials Spill Response
Update: 3-17-2011 Hazardous Materials Spill Response Fire, Police, Ambulance (Phone 911) Campus Security (425-754-0154) Cell Phone Campus Emergency Phone Facilities office (425-640-1542) 911 EMERGENCY
More informationSTANDARD OPERATING PROCEDURES SPILL RESPONSE AND CLEAN-UP OUTSIDE BIOSAFETY CABINET
BIOLOGICAL SPILL KIT IN A 5 GALLON BUCKET WITH LID Spill response and cleanup procedures (SOP) 1 Notepad 1 Pen 6 Business cards 1 Permanent marker 1 trash bag 6 Biohazard stickers 1 roll duct tape 1 roll
More informationUniversity Health Services 556-4968 Health and Safety EXPOSURE CONTROL PLAN
ADVISORY NO. 6.2: UNIVERSITY OF CINCINNATI EXPOSURE CONTROL PLAN PURPOSE: To control and minimize the transmission of bloodborne pathogens at the University of Cincinnati, to provide a safe workplace for
More informationStudent Shop Safety Policy GS92 Page 1
Policy Subject: Student Shop Safety Effective: 8/1/2012 Affected Area: Machine Shops on Campus Reviewed/Revised: 8/1/2012 1.0 Purpose, Applicability, and Scope 1.1 Purpose- This policy identifies the requirements
More informationStandard Operating Procedure
Standard Operating Procedure FLAMMABLE LIQUIDS This standard operating procedure (SOP) is intended to provide general guidance on how to safely work with flammable liquids. This SOP is generic in nature
More informationDISPOSAL OF WASTE (Reference: Waste Disposal, Safety Services Office, June 1997)
DISPOSAL OF WASTE (Reference: Waste Disposal, Safety Services Office, June 1997) WASTE MUST NOT BE GENERATED UNTIL A DISPOSAL ROUTE IS IDENTIFIED WASTE DISPOSAL ROUTE GENERAL Non-contaminated paper, plastic
More informationGeneral Shop Safety. 3. Wear hearing protection devices when using or when others are using loud equipment in the mechanics laboratory.
General Shop Safety I. Competencies Given the instruction in this unit each student will be able to pass a written test on general shop safety with a minimum of 100 percent accuracy. II. Instruction Material
More informationPOLICY & PROCEDURE: SAFE HANDLING OF SHARPS & NEEDLE STICKS
POLICY & PROCEDURE: SAFE HANDLING OF SHARPS & NEEDLE STICKS File Name: SAFESHARPSPP2013 Revision: 2 Date of Issue: Person Responsible: Edel Niland 1.0 POLICY Dublin Institute of Technology (DIT) endeavours
More information