Hot rolled, cold rolled and galvanized steel strips by Marcegaglia can match the most diverse requirements of target industries in terms of steel
|
|
|
- Rebecca Simmons
- 7 years ago
- Views:
Transcription
1 St r i ps
2 Hot rolled, cold rolled and galvanized steel strips by Marcegaglia can match the most diverse requirements of target industries in terms of steel grades, width, thickness, tolerances and surface finish. 24 Marcegaglia
3 Strips pickled, cold rolled, galvanized Marcegaglia 25
4 The manufacturing capacity and logistic features of Marcegaglia service centers worldwide allow maximum production flexibility of steel strip cold rolling and slitting. 1,260,000 t/y manufacturing capacity product: strips thickness: 0.20/12 mm width: 8/1530 mm product type: pickled, cold rolled, hot dip galvanized 26 Marcegaglia
5 Typical applications Steel for automotive applications A highly-customized range of steels is engineered according to automotive manufacturing standards, including galvanized or cold rolled high strength low alloy materials and high carbon alloys. Marcegaglia 27
6 Typical applications Steel for lamination Steel for shelving and furniture Steel for fine blanking Steel for household appliances 28 Marcegaglia
7 Steel for radiators Marcegaglia steel strip specialties encompass, in addition to deep drawing grades, semi-processed magnetic steels and extra-smooth surface galvanized material for several specific industrial uses, including now fine blanking. Steel for electrical control boards Steel for other industrial applications Marcegaglia 29
8 Pickled strips, single pass strips Product range Min. thickness (mm) / 1.20 Max. thickness (mm) / 12 Min. width (mm) / 8 Max. width (mm) / 1530 MANUFACTURING STANDARD EN EN EN EN PRODUCT DESIGNATION Non-alloy structural steels Hot-rolled high yield strength steels for cold forming Hot-rolled high yield strength steels for cold forming with single pass cold rolling for improved tolerances Hot rolled low carbon steels for cold forming GRADE S185 S235JR up to J2 (*) S275JR up to J2 (*) S355JR up to K2 (*) S315MC up to S500MC (other grades upon request) S355MC up to S600MC (other grades upon request) DD11 up to DD14 (other grades upon request) Upon request: supply of grades not included in the above mentioned standards or grades according to customers' standards, including major automotive manufacturers. (*) CE marking available - CE Supply conditions - - Dimensional tolerances according to EN (and other equivalent international norms) EN Control documents 2.1, 2.2, 3.1, 3.2 according to EN and other specific norm requirements EN Marcegaglia
9 SPECIAL TOLERANCES UPON REQUEST Marcegaglia 31
10 Cold rolled strips Product range Min. thickness (mm) / 0.20 Max. thickness (mm) / 4 Min. width (mm) / 8 Max. width (mm) / 1530 Supply conditions - - Tolerances according to EN (for EN 10139, EN width 600 mm, EN , -3, -4), EN (for EN width > 600 mm, EN 10130), EN EN (EN 10139, EN mm, EN ,-3,-4), EN (EN mm, EN 10130), EN Special tolerances upon request - Control documents 2.1, 2.2, 3.1, 3.2 according to EN and other specific norm requirements EN Marcegaglia
11 MANUFACTURING STANDARD PRODUCT DESIGNATION GRADE EN EN EN EN EN EN EN Marcegaglia standard STP 0032 UNI 7958 Marcegaglia standard STP 0044 Marcegaglia standard Cold rolled uncoated mild steel narrow strip for cold forming Cold rolled electrical non-alloy and alloy steel sheet and strip delivered in the semi-processed state Cold rolled steel flat products with high yield strength for cold forming Case hardening steel (cold rolled narrow steel strip for heat treatment) Steels for quenching and tempering (cold rolled narrow steel strip for heat treatment) Spring steel and other applications (cold rolled narrow steel strip for heat treatment) Cold rolled low carbon steel flat products for cold forming Cold rolled electrical steel for high performance shearing Structural steels Steel for radiators Full Hard steel DC01 LC/C DC03 LC/C DC04 LC/C DC05, DC06 M340-50K, M390-50K, M450-50K, M560-50K, M660-50K, M890-50K, M K, M390-65K, M450-65K, M520-65K, M630-65K, M800-65K, M K, M K HC220P, HC260P, HC260LA, HC300LA, HC340LA, HC380LA, HC420LA, H500LA-MM, HC180YD, HC220YD, HC260YD C10E, C15E, 16MnCr5, 17Cr3 C22E, C30E, C35E, C40E, C45E, C50E, C55E, C60E, 25Mn4, 25CrMo4, 34CrMo4, 42CrMo4 C55S, C60S, C67S, C75S, C85S, C90S, C100S, C125S, 48Si7, 56Si7, 51CrV4, 80CrV2, 75Ni8, 125Cr2, 102Cr6, 58CrV4 DC01, DC03, DC04, DC05, DC06 DC01LC-P FE360 RAD-1 Full hard steel grades are available for specific galvanizing requirements Upon request: supply of grades not included in the above mentioned standards or grades according to customers' standards, including major automotive manufacturers. SURFACE CONDITIONS acc. to EN EN SURFACE CONDITIONS acc. to EN EN SURFACE APPEARANCE MA (standard) () MB (improved) () SURFACE APPEARANCE A (standard) () B (improved) () MC (superior) () SURFACE FINISH RR rough > 1,6 μm RM normal 0,6 1,9 μm RC improved 0,9 μm RL semi-bright 0,4 μm RN bright 0,2 μm SURFACE FINISH r rough > 1,6 μm m normal 0,6 1,9 μm g semi-bright 0,9 μm b bright 0,4 μm Marcegaglia 33
12 THICKNESS TOLERANCES FOR NOMINAL WIDTH nominal thickness < e <600 > A B C A B C 0,10 ±0,008 ±0,006 ±0,004 ±0,010 ±0,008 ±0,005 0,10 0,15 ±0,010 ±0,008 ±0,005 ±0,015 ±0,012 ±0,010 0,15 0,25 ±0,015 ±0,012 ±0,008 ±0,020 ±0,015 ±0,010 0,25 0,40 ±0,020 ±0,015 ±0,010 ±0,025 ±0,020 ±0,012 0,40 0,60 ±0,025 ±0,020 ±0,012 ±0,030 ±0,025 ±0,015 0,60 1,00 ±0,030 ±0,025 ±0,015 ±0,035 ±0,030 ±0,020 1,00 1,50 ±0,035 ±0,030 ±0,020 ±0,040 ±0,035 ±0,025 1,50 2,50 ±0,045 ±0,035 ±0,025 ±0,050 ±0,040 ±0,030 2,50 4,00 ±0,050 ±0,045 ±0,030 ±0,060 ±0,050 ±0,035 4,00 6,00 ±0,060 ±0,050 ±0,035 ±0,070 ±0,055 ±0,040 6,00 8,00 ±0,075 ±0,060 ±0,040 ±0,085 ±0,065 ±0,045 8,00 10,00 ±0,090 ±0,070 ±0,045 ±0,100 ±0,075 ±0,050 WIDTH TOLERANCES nominal thickness < e < e <600 > A B A B A B 0,60 ±0,15 ±0,10 ±0,20 ±0,13 ±0,25 ±0,18 0,60 1,50 ±0,20 ±0,13 ±0,25 ±0,18 ±0,30 ±0,20 1,50 2,50 ±0,25 ±0,18 ±0,30 ±0,20 ±0,35 ±0,25 2,50 4,00 ±0,30 ±0,20 ±0,35 ±0,25 ±0,40 ±0,30 4,00 6,00 ±0,35 ±0,25 ±0,40 ±0,30 ±0,45 ±0,35 6,00 8,00 ±0,45 ±0,50 ±0,55 8,00 10,00 ±0,50 ±0,55 ±0,60 34 Marcegaglia
13 Marcegaglia 35
14 Hot dip galvanized strips Product range Min. thickness (mm) / 0.25 Max. thickness (mm) / 4 Min. width (mm) / 8 Max. width (mm) / 1530 MANUFACTURING STANDARD PRODUCT DESIGNATION GRADE EN EN Marcegaglia standard STP 0074 EN EN ASTM A653 Steel flat products for cold forming Structural steels Structural steels for construction High yield strength steels for cold forming Dual phase steels Hot dip zinc-coated steel (*) According to Italian D.M "Technical norms for construction" D.M DX 51D, DX52D, DX53D, DX54D, DX56D (other grades upon request) S220GD, S250GD, S250GD-DM*, S280GD, S280GD-DM*, S320GD, S350GD S390GD HX260LAD, HX300LAD, HX340LAD, HX380LAD, HX420LAD, DP600, DP800, DP1000 (other grades upon request) Upon request: supply of grades not included in the above mentioned standards or grades according to customers' standards, including major automotive manufacturers. Supply conditions - - Tolerances according to EN (and other equivalent international norms) EN Control documents 2.1, 2.2, 3.1, 3.2 according to EN and other specific norm requirements EN Marcegaglia
15 MORE ZINC LAYER OPTIONS, NEW STEEL GRADES TECHNICAL CHARACTERISTICS COVERING SURFACE FINISHES SURFACE APPEARANCES SURFACE TREATMENTS Coating is expressed in weight of zinc (g) over one square meter of product (total of two sides). Standard finish for industrial use Skinpassed surface Smooth cylinder skinpass Double smooth cylinder skinpass Highest standard of finish Normal spangle Reduced spangle Surface protection from oxidation, with improved suitability for plastic deformation. Chromate conversion coating resulting in the formation of a passivating film. Only trivalent chromium is employed. Transparent or semi-transparent organic coating with special protective, lubricant and antifingerprint properties. Available for thicknesses up to 1.4 mm. 1.4mm Z50 up to Z600 g/m 2 A (normal appearance) () B (improved surface) () B1(smooth) () B2 (bright) () C (superior) () N M Oiling Chromating Ecorsteel Marcegaglia 37
16 Oscillated wound coils Product range Min. thickness (mm) / 1.2 Max. thickness (mm) / 6 Min. width (mm) / 6 Max. width (mm) / 60 MANUFACTURING STANDARD EN EN EN EN PRODUCT DESIGNATION Cold rolled uncoated mild steel narrow strip for cold forming Case hardening steel (cold rolled narrow steel strip for heat treatment) Steels for quenching and tempering (cold rolled narrow steel strip for heat treatment) Spring steel and other applications (cold rolled narrow steel strip for heat treatment) GRADE DC01 LC/C DC03 LC/C DC04 LC/C DC05, DC06 C10E, C15E, 16MnCr5, 17Cr3 C22E, C30E, C35E, C40E, C45E, C50E, C55E, C60E, 25Mn4, 25CrMo4, 34CrMo4, 42CrMo4 C55S, C60S, C67S, C75S, C85S, C90S, C100S, C125S, 48Si7, 56Si7, 51CrV4, 80CrV2, 75Ni8, 125Cr2, 102Cr6, 58CrV4 38 Marcegaglia
17 Sharp edge Round edge Round-edged flat made from pickled, cold-rolled and hot-rolled strips width L mm thickness 1,2 1,5 1,8 2 2,5 3 3, weight kg/m 6 0,06 0,07 0,08 0,09 8 0,07 0,10 0,12 0,15 0,16 0, ,10 0,12 0,14 0,16 0,20 0,24 0,28 0, ,12 0,14 0,17 0,19 0,24 0,29 0,34 0, ,13 0,16 0,18 0,21 0,26 0,31 0,36 0, ,14 0,17 0,20 0,22 0,28 0,34 0,39 0, ,15 0,18 0,22 0,24 0,30 0,36 0,42 0,48 0, ,16 0,19 0,23 0,26 0,32 0,38 0,45 0,51 0, ,17 0,22 0,26 0,29 0,36 0,43 0,50 0,58 0, ,18 0,23 0,27 0,30 0,38 0,46 0,53 0,61 0, ,19 0,24 0,29 0,32 0,40 0,48 0,56 0,64 0,78 0, ,21 0,26 0,32 0,35 0,44 0,53 0,62 0,70 0,86 1, ,23 0,29 0,34 0,38 0,48 0,57 0,67 0,77 0,94 1, ,24 0,30 0,36 0,40 0,50 0,60 0,70 0,80 0,97 1, ,25 0,31 0,37 0,42 0,52 0,62 0,73 0,83 1,01 1, ,27 0,34 0,40 0,45 0,56 0,67 0,78 0,89 1,09 1, ,29 0,36 0,43 0,48 0,60 0,72 0,84 0,96 1,17 1, ,31 0,38 0,46 0,51 0,64 0,77 0,90 1,02 1,25 1, ,33 0,41 0,49 0,54 0,68 0,82 0,95 1,09 1,33 1, ,35 0,43 0,51 0,58 0,72 0,86 1,01 1,14 1,40 1, ,36 0,46 0,55 0,61 0,76 0,90 1,06 1,22 1,48 1, ,38 0,48 0,58 0,64 0,80 0,96 1,12 1,28 1,56 1, ,60 0,72 0,80 1,00 1,20 1,40 1,60 1,95 2, ,70 0,84 0,94 1,17 1,40 1,64 1,87 2,34 2,81 Supply conditions - - Coils or bars with minimum length 3000 mm and maximum length 6000 mm 3000mm6000mm - Dimensional tolerances according to Marcegaglia standards Marcegaglia 39
18 Standard packaging BN1 / C / M BN2 / C / M BN3 / BN4 / BN6 / BN7 / BN8 / BN1M BN1 BN2 BN3 BN4 BN6 BN7 BN8 Eye-to-side Eye-to-side cradle Eye-to-sky pallet Wood pieces Pallet 8x8 8x8 20-mm spacers 20 mm (1) (1) (1) 40-mm spacers 40 mm 80-mm spacers 80 mm Plastic protection for wood pieces Plastic film Bitumen and poly-coated paper (2) (2) (2) (3) (3) (4) (1) (3) (4) (1) (5) (2) (4) (5) (2) (C) (C) (6) (3) (5) (6) (3) Metal box (M) (M) 40 Marcegaglia
19 NON-STANDARD PACKAGING IS DEVELOPED ACCORDING TO CUSTOMER REQUEST Marcegaglia 41
20 may 2013 EN-CN
Valve Steel. Valve Steel
Valve Steel Valve Steel BÖHLER-UDDEHOLM Precision Strip AB is one of the world s leading manufacturers of high quality strip steel. More than a century s experience of cold rolling has given us a unique
GUARDRAIL POST STEEL
GUARDRAIL POST STEEL Guardrail posts meeting materials certification are evaluated and checked for: 1. Dimensional acceptance 2. Physical test results a. Chemical b. Physical 3. Galvanized or painted coating
TARIFF CODE and updates standard
TARIFF CODE and updates standard No HS CODE AHTN CODE PRODUCT DESCRIPTION PRODUCT TYPE STANDARDS IDENTIFIED 7207 Semi finished products of iron or non alloy steel Containing by weight less than 0.25% of
STRUCTURAL STEELS. Steel Grades S185 S235JR S235JRG2 S235JO S235J2G3 S235J2G4 S275JR S275JO S275J2G3 S275J2G4 S355JR S355JO S355J2G3 S355J2G4
STRUCTURAL STEELS Steel Grades S185 S235JR S235JRG2 S235JO S235J2G3 S235J2G4 S275JR S275JO S275J2G3 S275J2G4 S355JR S355JO S355J2G3 S355J2G4 S355K2G3 S355K2G4 E295 E335 E360 STRUCTURAL STEELS The unalloyed
North American Stainless
North American Stainless Flat Products Stainless Steel Sheet T409 INTRODUCTION NAS 409 is an 11% chromium, stabilized ferritic stainless steel. It is not as resistant to corrosion or high-temperature oxidation
North American Stainless
North American Stainless Flat Products Stainless Steel Grade Sheet 430 (S43000)/ EN 1.4016 Introduction: SS430 is a low-carbon plain chromium, ferritic stainless steel without any stabilization of carbon
North American Stainless
North American Stainless Long Products Stainless Steel Grade Sheet 2205 UNS S2205 EN 1.4462 2304 UNS S2304 EN 1.4362 INTRODUCTION Types 2205 and 2304 are duplex stainless steel grades with a microstructure,
Comparison of standards. Technical Terms of Delivery. voestalpine Stahl GmbH www.voestalpine.com/stahl
Comparison of standards Technical GmbH www.voestalpine.com/stahl Designation systems for steels Excerpt from EN 10027-1 Snnn Steels for general steel construction Pnnn Steels for pressure vessel construction
Manufacturing, Supply & Quality Plan for Tower Bolts. SL Tower Bolt Market Penetration
Manufacturing, Supply & Quality Plan for Tower Bolts Project: SL Tower Bolt Market Penetration Document History Version Date Original Document First Submission Feb 9, 2013 Rev1 Requested Revisions Comments
AISI O1 Cold work tool steel
T OOL STEEL FACTS AISI O1 Cold work tool steel Great Tooling Starts Here! This information is based on our present state of knowledge and is intended to provide general notes on our products and their
Perfection Spring & Stamping Corp. 1449 E. Algonquin Rd. Mount Prospect, IL 60056 USA www.pss-corp.com 411@pss-corp.com
Perfection Spring & Stamping Corp. 1449 E. Algonquin Rd. Mount Prospect, IL 60056 USA www.pss-corp.com 411@pss-corp.com Raw Material Type, Alloy, & Finishes By Manufacturing Method 1. Punch Press Department
North American Stainless
North American Stainless Flat Products Stainless Steel Grade Sheet 310S (S31008)/ EN 1.4845 Introduction: SS310 is a highly alloyed austenitic stainless steel designed for elevated-temperature service.
AUSTENITIC STAINLESS DAMASCENE STEEL
AUSTENITIC STAINLESS DAMASCENE STEEL Damasteel s austenitic stainless Damascene Steel is a mix between types 304L and 316L stainless steels which are variations of the 18 percent chromium 8 percent nickel
Contents Nickel Alloys... 2 Copper Alloys... 19 Titanium Alloys... 26 Stainless Steel... 33 Miscellaneous... 35 Welding Material... 37 Contact...
2015-04-09 Page 1 Contents Nickel Alloys... 2 Copper Alloys... 19 Titanium Alloys... 26 Stainless Steel... 33 Miscellaneous... 35 Welding Material... 37 Contact... 41 2015-04-09 Page 2 Nickel Alloys Alloy
Aluminium foil properties: Applications of aluminium foils and thin gauge strips in thickness below 0,50 mm:
1 ALUMINIUM FOILS AND THIN GAUGE STRIPS The year 2010 has been celebrated as the 100th anniversary of aluminium foil. Ever since the beginning in 1910 the usage of foil has been growing and products developed
ThyssenKrupp Rasselstein
Quality begins with ThyssenKrupp Rasselstein Product Range ThyssenKrupp Rasselstein Your Quality Partner Page 2 ThyssenKrupp Rasselstein Product Range Quality begins with ThyssenKrupp Rasselstein ThyssenKrupp
PAAM COMMERCIAL PRIVATE LIMITED
METAL PACKAGING We at Paam Group have been providing vast range of packaging products to our customers based on their preferences, needs and specifications. We provide all the materials required in metal
Metal Pressfitting Pipe Systems
VdS Guidelines for water extinguishing systems VdS 2100-26-3en Requirements and test methods Part 3: Additional provisions for Pipe Systems made of galvanized steel VdS 2100-26-3en : 2012-04 (01) Publishing
HJK CONSULTING ENGINEERS. Project Management Technology Operating Consulting Excellence
HJK CONSULTING ENGINEERS Project Management Technology Operating Consulting Excellence COLD ROLLING MILL EQUIPMENT HJK Consulting Engineers is supporting its client in sales of the following southern Europe
Special coating Corrotect. Anti-corrosion protection for rolling bearings and precision components
Special coating Corrotect Anti-corrosion protection for rolling bearings and precision components Special coating Corrotect Features Basic data on the Corrotect coating Rust is public enemy number 1 for
Cold drawn seamless steel tubes for mechanical applications
Cold drawn seamless steel tubes for mechanical applications Cold drawn precision seamless tubes for mechanical and general engineering applications. Available in various steel grades, according to the
Products. EschmannStahlGrades Plastic Mould Steel Hot Work Tool Steel Cold Work Tool Steel Overview
Products EschmannStahlGrades Plastic Mould Steel Hot Work Tool Steel Cold Work Tool Steel Overview High quality, Comprehensive and applicationoriented We Have the Right Solution High Quality and Quickly
Stainless steel flat products. Prodotti piani in acciaio inossidabile
St ai nl es ss t eel atpr oduc t s Moving ahead in the stainless sector. Within a strategy of consistent investments in its production chain, Marcegaglia has added the manufacturing of coils and sheets
Wear-resistant steels. Technical terms of delivery for heavy plates. voestalpine Grobblech GmbH www.voestalpine.com/grobblech
Wear-resistant steels Technical terms of delivery for heavy plates voestalpine Grobblech GmbH www.voestalpine.com/grobblech Wear-resistant steels durostat durostat 400 durostat 450 durostat 500 durostat
North American Stainless Long Products
North American Stainless Long Products 1 North American Stainless North American Stainless is part of the most competitive stainless steel manufacturing group in the world, Acerinox, S.A. The development
Standard Specification for Stainless Steel Bars and Shapes 1
Designation: A 276 06 Standard Specification for Stainless Steel Bars and Shapes 1 This standard is issued under the fixed designation A 276; the number immediately following the designation indicates
AISI CHEMICAL COMPOSITION LIMITS: Nonresulphurized Carbon Steels
AISI CHEMICAL COMPOSITION LIMITS: Nonresulphurized Carbon Steels AISI No. 1008 1010 1012 1015 1016 1017 1018 1019 1020 1021 1022 1023 1024 10 1026 1027 1029 10 1035 1036 1037 1038 1039 10 1041 1042 1043
Domex range of hot-rolled high strength sheet steel
Domex range of hot-rolled high strength sheet steel Domex is the brand name of hot-rolled sheet steel from SSAB Tunnplåt. Domex high strength steels are low-alloy, cold forming steels intended for the
North American Stainless
North American Stainless Long Products Stainless Steel Grade Sheet AISI 316 UNS S31600 EN 1.4401 AISI 316L UNS S31630 EN 1.4404 INTRODUCTION NAS provides 316 and 316L SS, which are molybdenum-bearing austenitic
RAMAX S Prehardened stainless holder steel
T O O L S T E E L F A C T S RAMAX S Prehardened stainless holder steel Wherever tools are made Wherever tools are used This information is based on our present state of knowledge and is intended to provide
China Yangzhou plant
China Yangzhou plant TM Marcegaglia China 714,000 sqm total area 153,000 sqm first phase covered area EN norms production quality standards Precision tubes from carbon and stainless steel Beijing Yangzhou
ALLOY 2205 DATA SHEET
ALLOY 2205 DATA SHEET UNS S32205, EN 1.4462 / UNS S31803 GENERAL PROPERTIES ////////////////////////////////////////////////////// //// 2205 (UNS designations S32205 / S31803) is a 22 % chromium, 3 % molybdenum,
Alternative Steel Materials to BS 5950
BC 1: 2008 Design Guide on Use of Alternative Steel Materials to BS 5950 BCA Sustainable Construction Series 3 The education and research arm of the Building and Construction Authority 200 Braddell Road
Cable Trays Technical Instructions & Specifications
Cable Trays Technical Instructions & Specifications Products Catalogue Objective and Structure The company s main objective is the supply of quality products, with respect to: practical design increased
ALLOY 6022 SHEET. Higher Strength with Improved Formability SUPPLYING THE WORLD S BEST
SUPPLYING THE WORLD S BEST DESCRIPTION 6022 is a heat treatable low copper, Al-Si-Mg sheet alloy developed by Alcoa to satisfy the needs of automotive manufacturers for closure panels, such as a hood,
COATED CARBIDE. TiN. Al 2 O 3
COATED CARBIDE GENERAL INFORMATION CVD = Chemical Vapour Deposition coated grades GC2015, GC2025, GC2135, GC235, GC3005, GC3015, GC3020, GC3025, GC3115, GC4015, GC4025, GC4035, S05F, and CD1810. PVD =
Faces & Surfaces. Competence and Quality in Packaging Steel.
Faces & Surfaces. Competence and Quality in Packaging Steel. A company of ThyssenKrupp Steel ThyssenKrupp Rasselstein tk Who is behind it? 3 People make all the difference. When a company like Rasselstein
JIS G3445 Carbon steel tubes for machine structural purposes
JIS G3445 arbon steel tubes for machine structural purposes 1. Scope This Japanese Industrial Standard specifies the carbon steel tubes, hereinafter referred to as the "tubes", used for machinery, automobiles,
HOME RESEARCH & DEVELOPMENT SECTORS WHY PROFILES STEEL STRIP & PLATES LOGISTICAL SERVICES. Presentation. Europe. Quality.
HOME SECTORS Presentation Europe PROFILES WHY Quality United States STEEL STRIP & PLATES SERVICES Finishing Ethiopia CUSTOM-MADE PROFILES INNOVATIVE EXPERTISE Always the best one-stop-shopping solution
Stainless steel grade chart
Stainless steel grade chart ATLAS STEELS METAL DISTRIBUTION Chemical analysis (%) specified C Si Mn P S Cr Mo Ni Other Austenitic stainless steels 253MA S30815 0.05 1.1-2.0 0.8 0.040 0.030 20.0-22.0 10.0-12.0
Claims Management Policy
Claims Management Policy INTRODUCTION ARCELORMITTAL DOFASCO CLAIMS MANAGEMENT POLICY This general claims policy covers light flat rolled sheet products produced at all ArcelorMittal Dofasco flat rolled
North American Stainless
North American Stainless Long Products Stainless Steel Grade Sheet AISI 304 UNS S30400 EN 1.4301 AISI 304L UNS S30430 EN 1.4307 INTRODUCTION: Types 304 and 304L are the most versatile and widely used of
INDUSTRIAL ROOFING CASE STUDY: The Advantages of Aluminized Stainless Steel. Roof Installed:
INDUSTRIAL ROOFING CASE STUDY: Aluminized Type 409 and Aluminized Type 439 Roofing Panels were Installed in an Industrial Building Site in Place of Painted GALVALUME. Aluminized Type 2 Carbon Steel was
Environmental Product Declaration EPD
Environmental Product Declaration EPD May 2014 EPD The company Europrofil AB, founded 1982, is the leading producer of light gauge steel profiles for the building construction industry. Headquarters and
Africa s leading steel supplier CATALOGUE TUBE & PIPE. The Macsteel Group - Africa s leading steel supplier - www.macsteel.co.za
Africa s leading steel supplier CATALOGUE TUBE & PIPE - www.macsteel.co.za TUBE & PIPE CONTENTS 1. Contents 13. Conveyance SANS 1182 - Light Page 7 2. Contact Details 14. Conveyance SANS 719 - Large Bore
North American Stainless
Introduction: North American Stainless Flat Products Stainless Steel Grade Sheet 309S (S30908)/ EN1.4833 SS309 is a highly alloyed austenitic stainless steel used for its excellent oxidation resistance,
Standard Specification for Seamless Ferritic and Austenitic Alloy-Steel Boiler, Superheater, and Heat-Exchanger Tubes 1
Designation: A 213/A 213M 03b Used in USDOE-NE standards Standard Specification for Seamless Ferritic and Austenitic Alloy-Steel Boiler, Superheater, and Heat-Exchanger Tubes 1 This standard is issued
QSTE... hot-rolled high strength cold forming sheet steel as per EN 10 149
QSTE... hot-rolled high strength cold forming sheet steel as per QStE hot-rolled high strength cold forming sheet steel Steels labelled QStE are a class of fine grain micro-alloyed thermo-mechanically
LEADER IN CUTTING TECHNOLOGY
LEADER IN CUTTING TECHNOLOGY FOR OVER 2 YEARS REASONS WHY TRONEX IS THE BEST IN THE WORLD 1 2 SUPERIOR CUTTING PERFORMANCE Cut hundreds of thousands of times before dulling. Cut hundreds of thousands of
Anodes and Misc Equipment
Anodes and Misc Equipment Application: Platinised Titanium Anodes Platinised titanium anodes are recommended for use in the following electrolytic processes:- Precious metal electroplating - e.g. Au, Pt,
ROLLING AND SURFACE COATING OF STEEL
ROLLING AND SURFACE COATING OF STEEL Steel is initially produced in 20 cm thick slabs. Steel in this form is usually processed further before being sold to customers. This generally involves rolling it
JIS G3472 Electric Resistance Welded Carbon Steel Tubes for Automobile Structural Purposes
JIS G3472 Electric Resistance Welded Carbon Steel Tubes for Automobile Structural Purposes 1. Scope This Japanese Industrial Standard specifies the electric resistance welded carbon steel tubes, hereinafter
Duplex stainless steels
Duple stainless steels 2202 2507 2304 2205 by ArcelorMittal ArcelorMittal, your key partner ArcelorMittal is the world leader in the steel industry. Through many of its units, it offers a multitude of
Impregnating Machine
Impregnating Machine Dasan Engineering manufactured Resin Coating & Laminating Machine for composite material and insulating material in addition to Impregnating & drying machine by means of high efficiency
CLAIMS POLICY. Steelscape products will meet or exceed quality criteria as described in the most recent versions of the following standards:
1 CLAIMS POLICY Steelscape strives to consistently provide high quality products to meet or exceed our customers needs. Unfortunately perfection cannot always be attained and products may not fulfill the
Seamless stainless tubes for hydraulic and instrumentation systems
Seamless stainless tubes for hydraulic and instrumentation systems stock assortment integrated production technical knowledge network of sales and service Reduce your lifecycle costs When selecting tubes
Master Panel 1000 R5 Roof
Master Panel 1000 R5 Roof Product Description The important feature of the roof elements are the easy installation procedure. The element fix exactly and pushed together without much force. Roof coverage
How To Make A Lightweight Hot Stamping
Innovative Materials and Technologies for Vehicle Construction Oliver Hoffmann, Hannover, 24.4.2012 ThyssenKrupp Group Structure 7 business areas including Steel Europe ThyssenKrupp Steel Europe Elevator
Precision Tubes. +90 212 393 58 58 Borusan Mannesmann Call Center. E-Mail: precision@borusan.com www.borusanmannesmann.com
Precision Tubes +90 212 393 58 58 Borusan Mannesmann Call Center E-Mail: precision@borusan.com www.borusanmannesmann.com March 16 Contents Milestones Borusan Holding at a Glance Borusan Mannesmann in Brief
LOW CARBON MICROALLOYED COLD ROLLED, HOT DIP GALVANIZED DUAL PHASE STEEL FOR LARGER CROSS-SECTIONAL AREAS WITH IMPROVED PROPERTIES
LOW CARBON MICROALLOYED COLD ROLLED, HOT DIP GALVANIZED DUAL PHASE STEEL FOR LARGER CROSS-SECTIONAL AREAS WITH IMPROVED PROPERTIES Hardy Mohrbacher NiobelCon bvba, Schilde, Belgium Thomas Schulz Salzgitter-Mannesmann
COMPAX SUPREME Mold Quality Tool Steel
T OOL STEEL FACTS COMPAX Mold Quality Tool Steel Great Tooling Starts Here! 2 This information is based on our present state of knowledge and is intended to provide general notes on our products and their
TECHNICAL DATA SHEET DURO HARD CHROME PLATING PROCESS
TECHNICAL DATA SHEET Duro hard chrome plating process is a high-speed bath which employs a special mixed soluble catalyst and has been developed to meet the modern hard chrome plating requirements. Its
How To Run A Test Lab In Rourkela
TESTING LABORATORY ROURKELA 1. Background: Keeping in view of the growing demand of quality of the products of the industries, Govt. has established Testing Laboratory, Rourkela, under the Directorate
U-Max Chamfering endmill SPMT-WL 0.17 (0.08-0.21) -WH 0.35 (0.10-0.42) R215.64. Long edge cutter 215.3 0.17 (0.10-0.20) R215.3 -AAH 0.12 (0.08-0.
General Turning PROFILING Feed recommendations Feed per tooth, fz (mm/tooth) Insert geometry Insert size Starting value (min.- max.) U-Max Chamfering endmill SPMT-WL 0.17 (0.08-0.21) -WH 0.35 (0.10-0.42)
LiftAlloy Chain Slings
CHAIN SLING BASICS Slings Lift-All chain slings meet or exceed all OSHA, ASME B30.9 and NACM standards and regulations. chain slings, available in 80 for 7/32" and 7/8"- /4" and 00 for 9/32"-3/4", are
North American Stainless
North American Stainless Flat Product Stainless Steel Grade Sheet 316 (S31600)/EN 1.4401 316L (S31603)/ EN 1.4404 INTRODUCTION NAS provides 316 and 316L SS, which are molybdenum-bearing austenitic stainless
Think precision, Think HSS REAMING
Think precision, Think HSS REAMING SUMMARY REAMING TOOLS 2 Zoom on a reamer 3 Which HSS for maximum efficiency? 4 Coatings for the best performance 5 Vocabulary 6 Choose the right design 7 Types of bevel
ASTM A860/A860M-09 Standard Specification for Wrought High Strength. Ferritic Steel Butt Welding Fittings. 1. Scope :- 2. Reference Documents :-
Standard Specification for Wrought High Strength Ferritic Steel Butt Welding Fittings 1. Scope :- 1.1 This specification covers wrought high strength ferritic steel butt-welding fitting of seamless and
PRELIMINARY BROCHURE. Uddeholm Ramax HH
PRELIMINARY BROCHURE Uddeholm Ramax HH Uddeholm Ramax HH Uddeholm Ramax HH provides several benefits: The product offers uniform hardness in all dimensions combined with excellent indentation resistance.
High-strength and ultrahigh-strength. Cut sheet from hot-rolled steel strip and heavy plate. voestalpine Steel Division www.voestalpine.
High-strength and ultrahigh-strength TM steels Cut sheet from hot-rolled steel strip and heavy plate Josef Elmer, Key account manager voestalpine Steel Division www.voestalpine.com/steel Weight savings
Lecture slides on rolling By: Dr H N Dhakal Lecturer in Mechanical and Marine Engineering, School of Engineering, University of Plymouth
Lecture slides on rolling By: Dr H N Dhakal Lecturer in Mechanical and Marine Engineering, School of Engineering, University of Plymouth Bulk deformation forming (rolling) Rolling is the process of reducing
How To Write A Recipe Card
Forging stock standards guideline Issue n 10 FORGING STOCK 30 Microstructure 34 Grain size Air melted (except if δ ferrite or problem 1 per batch) 50 Cleanness/ Inclusion See EN 2157-2. 51 Macrostructure
Heavy Plates. Ingots & Forged Products
Heavy Plates Ingots & Forged Products Europe - Plate Three specialised mills at your service NLMK Europe - Plate gathers under one name three specialists, using technologically advanced production methods.
IHSS-N1 WELDED HONEYCOMB CORE SPECIFICATION. Generated: Sergiy Papyshev Engineering. Approved: Don Prysi Manufacturing. Approved: Merzuk Ramic Quality
IHSS-N1 WELDED HONEYCOMB CORE SPECIFICATION Generated: Sergiy Papyshev Engineering Approved: Don Prysi Manufacturing Approved: Merzuk Ramic Quality Approved: Steven Barnett Administrative DATE DATE DATE
Understanding Coating Weight Designations for Zinc-Based Coatings on Steel Sheet Rev 2.2 Jan-04
GalvInfoNote 1 Understanding Weight Designations for Zinc-Based s on Steel Sheet Introduction One of the most confusing topics related to coated-steel sheet products is the issue of coating weight designations
TEXNIKH 1501-05-07-02-00:2009 HELLENIC TECHNICAL SPECIFICATION. ежглеяис тгс йубеямгсеыс (теувос еутеяо) 33063 2009-12-23 ICS: 93.080.
ежглеяис тгс йубеямгсеыс (теувос еутеяо) 33063 2009-12-23 ICS 9308040 1501-05-07-02-002009 TEXNIKH HELLENIC TECHNICAL SPECIFICATION Road lighting columns and fixtures 10 313 111 45 33064 ежглеяис тгс йубеямгсеыс
SPECIFICATIONS FOR STEEL PIPE
SPECIFICATIONS FOR STEEL PIPE Published pipe standards serve three functions. 1. They dictate manufacturing and testing requirements and prescribed methods of measuring the required mechanical and physical
Standard Specification for Tool Steel High Speed 1
Designation: A 600 92a (Reapproved 2004) Standard Specification for Tool Steel High Speed This standard is issued under the fixed designation A 600; the number immediately following the designation indicates
How To Test A Wrap N Drain X Dampproofing System
National Research Council Canada Institute for Research in Construction Conseil national de recherches Canada Institut de recherche en construction CCMC 13094-R &&0& EVALUATION DIVISION 07111 REPORT Issued
AK Steel Specialty Stainless Sheet & Strip Stainless Price Schedule Revised August 2012
AK Steel Specialty Stainless Sheet & Strip Stainless Price Schedule Revised August 2012 AK Steel Corporation Corporate Headquarters 9227 Centre Pointe Drive West Chester, OH 45069 Customer Service: 800.331.5050
FLAME CuTTIng te la P is utting B c
FLAME CUTTING Both Oxy-LPG and Oxy-acetylene processes are acceptable for sectioning all thicknesses of BISPLATE. With these processes, the following techniques are recommended: Gas pressure to be the
Drawn Cup Needle Roller Bearings
Drawn up Needle Roller Bearings NSK has introduced the most advanced bearing technology, offering unprecedented precision and reliability. Available in two types caged and full complement. High-quality
X15TN TM. A high hardness, corrosion and fatigue resistance martensitic grade CONTINUOUS INNOVATION RESEARCH SERVICE.
TM A high hardness, corrosion and fatigue resistance martensitic grade CONTINUOUS METALLURGICAL SPECIAL STEELS INNOVATION RESEARCH SERVICE DEVELOPMENT Enhancing your performance THE INDUSTRIAL ENVIRONMENT
Drill Pipe Hard-facing
Drill Pipe Hard-facing GLOBAL PROTECTION AGAINST WEAR AND TEAR Oxyacetylene Rods Flux- and Metal Cored Wires Electrodes PTA - Welding Oxyacetylene Welding and Spray Powders Flame Spraying FLSP Arc Spraying
Master Panel 1000 W Wall
Master Panel 1000 W Wall Product Description In order to generate an aesthethic outlook wall panels are generally produced as micro hedge. Besides, in connection points concealed screw is used which provides
There is no upside to. down time
EXPANDED and PERFORATED Data and Specifications 30 Similar to Type 302 with excellent mechanical properties, resistance to many corrosive agents. Useful where sanitation and cleanliness are important.
Structural Bolting. Notice the Grade 5 has a much smaller head configuration and a shorter shank then the A325 structural bolt. Rev.
Structural Bolting ASTM A325 and ASTM A490 are the two U.S. standard structural bolts. When looking at the mechanical requirements of bolts it appears that an ASTM A325 and SAE J429 Grade 5 are identical
Technical Data BLUE SHEET. Martensitic. stainless steels. Types 410, 420, 425 Mod, and 440A GENERAL PROPERTIES APPLICATIONS PRODUCT FORM
Technical Data BLUE SHEET Allegheny Ludlum Corporation Pittsburgh, PA Martensitic Stainless Steels Types 410, 420, 425 Mod, and 440A GENERAL PROPERTIES Allegheny Ludlum Types 410, 420, 425 Modified, and
NEW SIX-SEALS CUTTING RING. INTERNATIONAL INDUSTRIAL PATENT Nr. 864061 of the 10/03/99 FLANKS AND DOES NOT REPLACE THE STANDARD RING CURRENTLY IN USE
B4 NEW SIX-SEALS CUTTING RING. INTERNATIONAL INDUSTRIAL PATENT Nr. 864061 of the 10/03/99 FLANKS AND DOES NOT REPLACE THE STANDARD RING CURRENTLY IN USE AVAILABLE IN CARBON AND STAINLESS STEEL 23 THEORY
Tolerance +/- 0,5 mm, +/- 0,2 mm. Length 15-350 mm ( standard) SLOTS. 9 5/8 x 36 Ibs/ft. 4 1/2 x 9,5 Ibs/ft. Slotted casing
Slotted casing Tube API 5CT, grade J/K55, R1, R2, STC: 4 1/2 x 9,5 Ibs/ft number of slots / meter number of ranges on circumference number of ranges per linear meter 24 4 6 9 5/8 x 36 Ibs/ft 48 8 6 Slotted
SPECIFICATION Aluminum Module Frames. Allowed anodization before fabrication for clear frames.
SPECIFICATION Allowed anodization before fabrication for clear frames. Page 2 of 9 1. SCOPE 1.1. This document provides general requirements for aluminum frames used in the assembly of photovoltaic modules.
Introduction. ε 1 θ=55 ε 2. Localized necking Because ν=0.5 in plasticity, ε 1 =-2ε 2 =-2ε 3. ε 3,ε 2
SHEET METALWORKING 1. Cutting Operation 2. Bending Operation 3. Drawing 4. Other Sheet-metal Forming 5. Dies and Presses 6. Sheet-metal Operation 7. Bending of Tube Stock 1 Introduction Cutting and forming
FRACASSO SCAFFOLDING PS 720
FRACASSO SCAFFOLDING PS 720 Characteristics Geometry Strengths PS 720 was designed and constructed in keeping with European regulations EN12810 and EN12811. 150 mm pin obtained by tapering the upright
Aluminium Rolling Mill Technology
DIE BIBLIOTHEK DER TECHNIK 233 Aluminium Rolling Mill Technology Future concepts in thin-strip and foil rolling VERLAG MODERNE INDUSTRIE Achenbach Buschhütten Contents Aluminium an innovative material
DX2202 Duplex stainless steel
Stainless Europe Grade DX22 Duplex stainless steel Chemical Composition Elements C Mn Cr Ni Mo N %.25.3 23. 2.5
Chapter 17: Springs. Fundamentals of Machine Elements, 3 rd ed. Schmid, Hamrock and Jacobson. 2014 CRC Press
Chapter 17: Springs It must be confessed that the inventors of the mechanical arts have been much more useful to men than the inventors of syllogisms. Voltaire A collection of helical compression springs.
ROLL PASS DESIGN EVAULUATION USING SOFTWARE APPLICATION ARINDAM MUKHERJEE PROJECT MANAGEMENT CELL UNDP/GEF PROJECT (STEEL)
ROLL PASS DESIGN EVAULUATION USING SOFTWARE APPLICATION ARINDAM MUKHERJEE PROJECT MANAGEMENT CELL UNDP/GEF PROJECT (STEEL) OBJECTIVE OF ROLL PASS DESIGN Steel sections are generally rolled in several passes,
Seamless Tubes and Pipes for Power Plants
Seamless Tubes and Pipes for Power Plants Seamless tubes and pipes for Power Plants Features The boiler tubes and pipes are manufactured with materials able to withstand high temperatures and high pressures.