RClamp0531TQ. Ultra-Low Capacitance RClamp 1-Line, 5V ESD Protection. PROTECTION PRODUCTS Description. Features. Mechanical Characteristics

Save this PDF as:
 WORD  PNG  TXT  JPG

Size: px
Start display at page:

Download "RClamp0531TQ. Ultra-Low Capacitance RClamp 1-Line, 5V ESD Protection. PROTECTION PRODUCTS Description. Features. Mechanical Characteristics"

Transcription

1 PROTECTION PRODUCTS Description RailClamp is an ultra low capacitance Transient Voltage Suppressor (TVS) designed to protect high speed data interfaces. This device has been specifically designed to protect sensitive components which are connected to high-speed data and transmission lines from overvoltage caused by ESD (electrostatic discharge), CDE (Cable Discharge Events), and EFT (electrical fast transients). The RClamp TM 531TQ has a maximum capacitance of only.8pf. This allows it to be used on circuits operating in excess of 2.5GHz without signal attenuation. They may be used to meet the ESD immunity requirements of IEC The RClamp531TQ is in a 2-pin SLP16P2T package measuring 1. x.6 x.4mm. The leads are spaced at a pitch of.65mm and feature a lead-free finish. Each device will protect one high-speed line operating at 5 volts. It gives the designer the flexibility to protect single lines in applications where arrays are not practical. The combination of small size, low capacitance, and high ESD surge capability makes them ideal for use in applications such as cellular phones and digital video interfaces. The RClamp531TQ is AEC-Q1 Grade 1 qualified for Automotive use. Package Dimension Features RClamp531TQ Ultra-Low Capacitance RClamp 1-Line, 5V ESD Protection Transient protection for data lines to IEC (ESD) ±2kV (air), ±12kV (contact) IEC (EFT) 4A (tp = 5/5ns) Cable Discharge Event (CDE) Ultra-small package (1. x.6 x.4mm) Protects one I/O line Low capacitance:.8pf Low clamping voltage Solid-state silicon-avalanche technology AEC-Q1 Grade 1 qualified Mechanical Characteristics SLP16P2T package Molding compound flammability rating: UL 94V- Marking: Marking code + date code Packaging : Tape and Reel Lead Finish: NiPdAu Pb-Free, Halogen Free, RoHS/WEEE Compliant Applications Cellular Handsets & Accessories Digital Visual Interface (DVI) FM Antenna MDDI Ports USB Ports PCI Express Serial ATA Automotive Applications Schematic & Pin Configuration 1..6 SLP16P2T-1-R.4 RClamp531TQ Final Datasheet Rev 2. Revision date 12/27/216 Nominal Dimensions (mm) SLP16P2T (Bottom View) 1 of 8

2 Absolute Maximum Rating Rating Symbol Value Units Peak Pulse Power (tp = 8/2µs) P PK 8 W Peak Pulse Current (tp = 8/2µs) I PP 4 A ESD per IEC (Air) (1) ±2 V ESD per IEC (Contact) (1) ESD ±12 Operating Temperature T J -4 to +125 O C Storage Temperature T STG -55 to +15 O C kv Electrical Characteristics (T=25 O C unless otherwise specified) Parameter Symbol Conditions Min. Typ. Max. Units Reverse Stand-Off Voltage V RWM 5 V Reverse Breakdown Voltage V BR I BR = 1 ma V V RWM = 5V, T = 25 O C.1.1 Reverse Leakage Current I R V RWM = 5V, T = 125 O C.2.2 μa Clamping Voltage V C tp = 8/2µs I PP = 1A 12 I PP = 4A 2 V Junction Capacitance C J V R = V to 5V, f = 1MHz, T = 25 O C.5.8 V R = V to 5V, f = 1GHz, T = 125 O C pf Notes 1) ESD gun return path connected to ESD ground plane. RClamp531TQ Final Datasheet Rev 2. Revision Date 12/27/ of 8

3 Typical Characteristics Non-Reptitive Peak Pulse Power vs. Pulse Time Power Derating Curve 1 DR Peak Pulse Power - P PP (kw) 1.1 % of Rated Power or I PP Pulse Duration - tp (µs) DR Ambient Temperature - T A ( O C) Clamping Voltage vs. Peak Pulse Current Junction Capacitance vs. Reverse Voltage Clamping Voltage -V C (V) 1 5 T A =25 O C Waveform Parameters: tr = 8µs; td = 2µs Peak Pulse Current - I PP (A) R2 Capacitance - C j (pf) f = 1 MHz R Reverse Voltage - V R (V) Insertion Loss (S21) USB 2. Eye Pattern with RClamp531TQ -3 Insertion Loss - IL (db) Frequency (MHz) RClamp531TQ Final Datasheet Rev 2. Revision Date 12/27/ of 8

4 Typical Characteristics ESD Clamping per IEC Positive clamping voltage at first peak ESD Clamping per IEC Negative clamping voltage at first peak Clamping Voltage V C (V) Waveform 1ns/6ns. Clamping measured at first peak. Corrected for 4dB attenuation. Measured with 5Ω, 4dB attenuator; 5Ω Scope Input Impedance ESD Surge (kv) Clamping Voltage V C (V) _R Waveform 1ns/6ns. Clamping measured at first peak. Corrected for 4dB attenuation. Measured with 5Ω, 4dB attenuator; 5Ω Scope Input Impedance _R ESD Surge (kv) Clamping Voltage V C (V) ESD Clamping per IEC Positive clamping voltage at 3ns Waveform 1ns/6ns. Clamping measured at 3ns Corrected for 4dB attenuation. Measured with 5Ω, 4dB attenuator; 5Ω Scope Input Impedance _R ESD Surge (kv) Clamping Voltage V C (V) ESD Clamping per IEC Negative clamping voltage at 3ns Waveform 1ns/6ns. Clamping measured at 3ns. Corrected for 4dB attenuation. Measured with 5Ω, 4dB attenuator; 5Ω Scope Input Impedance _R ESD Surge (kv) Typical TLP Characteristics 3 25 Line to Line TLP Parameters: tp = 1ns; tr = 2ps TLP Current (A) R DYN:.46Ω _R TLP Voltage (V) RClamp531TQ Final Datasheet Rev 2. Revision Date 12/27/ of 8

5 Typical Characteristics Typical Capacitance vs. Temperature Typical Breakdown Voltage vs. Temperature Junction Capacitance C J (pf) V R = V Pin1 to Pin2 or Pin2 to Pin1 Breakdown Voltage V BR (V) I T = 1mA Pin1 to Pin2 or Pin2 to Pin Temperature ( O C) AR583_R1 9. AR583_R Temperature ( O C) Typical Leakage Current vs. Temperature Typical Leakage Current vs. Reverse Voltage 2 VR = 5V Pin1 to Pin2 or Pin2 to Pin Pin2 to Pin1 or Pin1 to Pin2 Leakage Current I R (na) 1 Leakage Current I R (na) AR583_R Temperature ( O C). AR583_R Reverse Voltage V R (V) RClamp531TQ Final Datasheet Rev 2. Revision Date 12/27/ of 8

6 Outline Drawing - SLP16P2T aaa C A D TOP VIEW.1 PIN 1 ID B E A R C SEATING PLANE DIMENSIONS INCHES MILLIMETERS DIM MIN NOM MAX MIN NOM MAX A A b D E e.26 BSC.65 BSC L R N 2 2 aaa.3.8 bbb.4.1 SLP16P2T-2-R bbb M C A B bxn e 2xL BOTTOM VIEW NOTES: 1. CONTROLLING DIMENSIONS ARE IN MILLIMETERS (ANGLES IN DEGREES). Land Pattern - SLP16P2T (C) G X Y Z DIMENSIONS DIM INCHES MILLIMETERS C (.33) (.85) G X Y Z SLP16P2T-3-R NOTES: 1. CONTROLLING DIMENSIONS ARE IN MILLIMETERS (ANGLES IN DEGREES). 2. THIS LAND PATTERN IS FOR REFERENCE PURPOSES ONLY.CONSULT YOUR MANUFACTURING GROUP TO ENSURE YOUR COMPANY'S MANUFACTURING GUIDELINES ARE MET. RClamp531TQ Final Datasheet Rev 2. Revision Date 12/27/ of 8

7 Marking Code Notes: 1. Marking will also include line matrix date code. 2. Device is electrically symmetrical. Tape and Reel Specification Pin 1 Location (Towards Sprocket Holes) Ordering Information Part Number Qty per Reel Reel Size RClamp531TQTCT 3, 7 RClamp531TQ Final Datasheet Rev 2. Revision Date 12/27/ of 8

8 IMPORTANT NOTICE Information relating to this product and the application or design described herein is believed to be reliable, however such information is provided as a guide only and assumes no liability for any errors in this document, or for the application or design described herein. reserves the right to make changes to the product or this document at any time without notice. Buyers should obtain the latest relevant information before placing orders and should verify that such information is current and complete. warrants performance of its products to the specifications applicable at the time of sale, and all sales are made in accordance with s standard terms and conditions of sale. SEMTECH PRODUCTS ARE NOT DESIGNED, INTENDED, AUTHORIZED OR WARRANTED TO BE SUITABLE FOR USE IN LIFE-SUPPORT APPLICATIONS, DEVICES OR SYSTEMS, OR IN NUCLEAR APPLICATIONS IN WHICH THE FAILURE COULD BE REASONABLY EXPECTED TO RESULT IN PERSONAL INJURY, LOSS OF LIFE OR SEVERE PROPERTY OR ENVIRONMENTAL DAMAGE. INCLUSION OF SEMTECH PRODUCTS IN SUCH APPLICATIONS IS UNDERSTOOD TO BE UNDERTAKEN SOLELY AT THE CUSTOMER S OWN RISK. Should a customer purchase or use products for any such unauthorized application, the customer shall indemnify and hold and its officers, employees, subsidiaries, affiliates, and distributors harmless against all claims, costs damages and attorney fees which could arise. The name and logo are registered trademarks of the Corporation. All other trademarks and trade names mentioned may be marks and names of or their respective companies. reserves the right to make changes to, or discontinue any products described in this document without further notice. makes no warranty, representation or guarantee, express or implied, regarding the suitability of its products for any particular purpose. All rights reserved. 215 Contact Information Corporation 2 Flynn Road, Camarillo, CA 9312 Phone: (85) , Fax: (85) RClamp531TQ Final Datasheet 2. Revision date 12/27/216 8 of 8

RClamp0504P RailClamp Low Capacitance TVS Array

RClamp0504P RailClamp Low Capacitance TVS Array - RailClamp Description RailClamps are low capacitance TVS arrays designed to protect high speed data interfaces. This series has been specifically designed to protect sensitive components which are connected

More information

µclamp3601p TVS Diode for Proximity Switch Input Protection PROTECTION PRODUCTS - MicroClamp Description Features Mechanical Characteristics

µclamp3601p TVS Diode for Proximity Switch Input Protection PROTECTION PRODUCTS - MicroClamp Description Features Mechanical Characteristics PRTECTIN PRDUCTS - MicroClamp Description The µclamp P is a high-surge transient voltage suppressor (TVS) optimized for protection of sensitive digital sensors used in proximity switches and industrial

More information

LC03-6. Low Capacitance TVS for High-Speed Data Interfaces. Features. Description. Mechanical Characteristics. Applications

LC03-6. Low Capacitance TVS for High-Speed Data Interfaces. Features. Description. Mechanical Characteristics. Applications Description The LC0- transient voltage suppressor is designed to protect components which are connected to high speed telecommunication lines from voltage surges caused by lightning, electrostatic discharge

More information

LC05-6. Dual Low Capacitance TVS Array for Telecom Line-Card Applications. PROTECTION PRODUCTS Description. Features. Mechanical Characteristics

LC05-6. Dual Low Capacitance TVS Array for Telecom Line-Card Applications. PROTECTION PRODUCTS Description. Features. Mechanical Characteristics Description The LC5-6 has been specifically designed to protect sensitive components which are connected to highspeed telecommunications lines from over voltages caused by lightning, electrostatic discharge

More information

uclamp3301d Low Voltage µclamp TM for ESD and CDE Protection PROTECTION PRODUCTS - MicroClamp TM Description Features Mechanical Characteristics

uclamp3301d Low Voltage µclamp TM for ESD and CDE Protection PROTECTION PRODUCTS - MicroClamp TM Description Features Mechanical Characteristics MicroClamp TM Description The µclamp TM series of Transient oltage Suppressors (TS) are designed to replace multilayer varistors (MLs) in portable applications such as cell phones, notebook computers,

More information

STF201-22 & STF201-30

STF201-22 & STF201-30 Description The STF201 is a combination EMI filter and line termination device with integrated TVS diodes for use on downstream USB ports. It is constructed using a proprietary technology that allows passive

More information

ESD7484. 4-Line Ultra-Large Bandwidth ESD Protection

ESD7484. 4-Line Ultra-Large Bandwidth ESD Protection 4-Line Ultra-Large Bandwidth ESD Protection Functional Description The ESD7484 chip is a monolithic, application specific discrete device dedicated to ESD protection of the HDMI connection. It also offers

More information

LC03-6R2G. Low Capacitance Surface Mount TVS for High-Speed Data Interfaces. SO-8 LOW CAPACITANCE VOLTAGE SUPPRESSOR 2 kw PEAK POWER 6 VOLTS

LC03-6R2G. Low Capacitance Surface Mount TVS for High-Speed Data Interfaces. SO-8 LOW CAPACITANCE VOLTAGE SUPPRESSOR 2 kw PEAK POWER 6 VOLTS Low Capacitance Surface Mount TVS for High-Speed Data terfaces The LC3- transient voltage suppressor is designed to protect equipment attached to high speed communication lines from ESD, EFT, and lighting.

More information

LC01-6. Low Capacitance TVS for High-Speed Telecommunication Systems. PROTECTION PRODUCTS Description. Features. Applications

LC01-6. Low Capacitance TVS for High-Speed Telecommunication Systems. PROTECTION PRODUCTS Description. Features. Applications escription The transient voltage suppressor is designed to protect components which are connected to high speed telecommunication lines from voltage surges caused by lightning, electrostatic discharge

More information

NUP4106. Low Capacitance Surface Mount TVS for High-Speed Data Interfaces SO 8 LOW CAPACITANCE VOLTAGE SUPPRESSOR 500 WATTS PEAK POWER 3.

NUP4106. Low Capacitance Surface Mount TVS for High-Speed Data Interfaces SO 8 LOW CAPACITANCE VOLTAGE SUPPRESSOR 500 WATTS PEAK POWER 3. Low Capacitance Surface Mount TVS for High-Speed Data Interfaces The NUP0 transient voltage suppressor is designed to protect equipment attached to high speed communication lines from ESD and lightning.

More information

SLVU2.8. PROTECTION PRODUCTS Absolute Maximum Rating. Electrical Characteristics I T I PP V R I PT I F. www.semtech.com. 2008 Semtech Corp.

SLVU2.8. PROTECTION PRODUCTS Absolute Maximum Rating. Electrical Characteristics I T I PP V R I PT I F. www.semtech.com. 2008 Semtech Corp. Description The SL series of transient voltage suppressors are designed to protect low voltage, state-of-the-art MOS semiconductors from transients caused by electrostatic discharge (ESD), cable discharge

More information

LC03-3.3. Low Capacitance 3.3 Volt TVS for High Speed Interfaces. PROTECTION PRODUCTS Description. Features. Applications

LC03-3.3. Low Capacitance 3.3 Volt TVS for High Speed Interfaces. PROTECTION PRODUCTS Description. Features. Applications Descrition The LC3-3.3 transient voltage suressor is designed to rotect comonents which are connected to high seed data and telecommunication lines from voltage surges caused by lightning, electrostatic

More information

PRTR5V0U2F; PRTR5V0U2K

PRTR5V0U2F; PRTR5V0U2K Rev. 02 19 February 2009 Product data sheet 1. Product profile 1.1 General description Ultra low capacitance double rail-to-rail ElectroStatic Discharge (ESD) protection devices in leadless ultra small

More information

LCDA12C-8 and LCDA15C-8

LCDA12C-8 and LCDA15C-8 ROTECTION RODUCTS Descrition The LCDAxxC-8 has been secifically designed to rotect sensitive comonents which are connected to data and transmission lines from over voltages caused by electrostatic discharge

More information

ESDLIN1524BJ. Transil, transient voltage surge suppressor diode for ESD protection. Features. Description SOD323

ESDLIN1524BJ. Transil, transient voltage surge suppressor diode for ESD protection. Features. Description SOD323 Transil, transient voltage surge suppressor diode for ESD protection Datasheet production data Features Max peak pulse power 160 W (8/0 µs) Asymmetrical bidirectional device Stand-off voltage: 15 and 4

More information

STIEC45-xxAS, STIEC45-xxACS

STIEC45-xxAS, STIEC45-xxACS Transil TVS for IEC 61000-4-5 compliance Datasheet - production data differential mode MIL STD 883G, method 3015-7 Class 3B 25 kv HBM (human body model) Resin meets UL 94, V0 MIL-STD-750, method 2026 solderability

More information

Table 1. Absolute maximum ratings (T amb = 25 C) Symbol Parameter Value Unit. ISO 10605 - C = 330 pf, R = 330 Ω : Contact discharge Air discharge

Table 1. Absolute maximum ratings (T amb = 25 C) Symbol Parameter Value Unit. ISO 10605 - C = 330 pf, R = 330 Ω : Contact discharge Air discharge Automotive dual-line Transil, transient voltage suppressor (TVS) for CAN bus Datasheet - production data Complies with the following standards ISO 10605 - C = 150 pf, R = 330 Ω : 30 kv (air discharge)

More information

P6KE. Transil, transient voltage surge suppressor (TVS) Features. Description. Complies with the following standards

P6KE. Transil, transient voltage surge suppressor (TVS) Features. Description. Complies with the following standards Transil, transient voltage surge suppressor (TVS) Datasheet production data Features Peak pulse power: 600 W (10/0 µs ) Stand-off voltage range 6.8 to 440 V Unidirectional and bidirectional types Low clamping

More information

BZW50. Transil, transient voltage surge suppressor (TVS) Features. Description

BZW50. Transil, transient voltage surge suppressor (TVS) Features. Description Transil, transient voltage surge suppressor (TVS) Datasheet production data Features Peak pulse power: 5000 W (10/0 µs) Stand-off voltage range from 10 V to 180 V Unidirectional and bidirectional types

More information

ETP01-xx21. Protection for Ethernet lines. Features. Description. Applications. Benefits. Complies with the following standards

ETP01-xx21. Protection for Ethernet lines. Features. Description. Applications. Benefits. Complies with the following standards ETP0-xx2 Protection for Ethernet lines Features Differential and common mode protection Telcordia GR089 Intrabuilding: 50 A, 2/0 µs ITU-T K20/2: 40 A, 5/30 µs Low capacitance: 3 pf max at 0 V UL94 V0 approved

More information

DSL01-xxxSC5. Secondary protection for DSL lines. Features. Description. Applications. Benefits. Complies with the following standards

DSL01-xxxSC5. Secondary protection for DSL lines. Features. Description. Applications. Benefits. Complies with the following standards -xxxsc5 Secondary protection for DSL lines Features Low capacitance devices: -xxxsc5: Delta C typ = 3.5 pf High surge capability: 30 A - 8/20 µs Voltage: 8 V, 10.5 V, 16 V, and 24 V RoHS package Benefits

More information

NTMS4920NR2G. Power MOSFET 30 V, 17 A, N Channel, SO 8 Features

NTMS4920NR2G. Power MOSFET 30 V, 17 A, N Channel, SO 8 Features NTMS9N Power MOSFET 3 V, 7 A, N Channel, SO Features Low R DS(on) to Minimize Conduction Losses Low Capacitance to Minimize Driver Losses Optimized Gate Charge to Minimize Switching Losses These Devices

More information

ESD protection for high-speed interfaces

ESD protection for high-speed interfaces Rev. 1 1 October 212 Product data sheet 1. Product profile 1.1 General description The device is designed to protect high-speed interfaces such as High-Definition Multimedia Interface (HDMI), DisplayPort,

More information

DDSL01. Secondary protection for DSL lines. Features. Description

DDSL01. Secondary protection for DSL lines. Features. Description Secondary protection for DSL lines Features Stand off voltage: 30 V Surge capability: I pp = 30 A 8/20 µs Low capacitance device: 4.5 pf at 2 V RoHS package Low leakage current: 0.5 µa at 25 C 3 2 Description

More information

Metal-Oxide Varistors (MOVs) Surface Mount Multilayer Varistors (MLVs) > MLN Series. MLN SurgeArray TM Suppressor. Description

Metal-Oxide Varistors (MOVs) Surface Mount Multilayer Varistors (MLVs) > MLN Series. MLN SurgeArray TM Suppressor. Description MLN SurgeArray TM Suppressor RoHS Description The MLN SurgeArray Suppressor is designed to help protect components from transient voltages that exist at the circuit board level. This device provides four

More information

High Power Infrared Emitting Diode, 940 nm, GaAlAs/GaAs

High Power Infrared Emitting Diode, 940 nm, GaAlAs/GaAs TSAL64 High Power Infrared Emitting Diode, 94 nm, GaAlAs/GaAs DESCRIPTION 94 8389 TSAL64 is an infrared, 94 nm emitting diode in GaAlAs/GaAs technology with high radiant power molded in a blue-gray plastic

More information

IP4294CZ10-TBR. ESD protection for ultra high-speed interfaces

IP4294CZ10-TBR. ESD protection for ultra high-speed interfaces XSON1 Rev. 4 1 November 213 Product data sheet 1. Product profile 1.1 General description The device is designed to protect high-speed interfaces such as SuperSpeed USB, High-Definition Multimedia Interface

More information

Features. Modulation Frequency (khz) VDD. PLL Clock Synthesizer with Spread Spectrum Circuitry GND

Features. Modulation Frequency (khz) VDD. PLL Clock Synthesizer with Spread Spectrum Circuitry GND DATASHEET IDT5P50901/2/3/4 Description The IDT5P50901/2/3/4 is a family of 1.8V low power, spread spectrum clock generators capable of reducing EMI radiation from an input clock. Spread spectrum technique

More information

Y.LIN ELECTRONICS CO.,LTD.

Y.LIN ELECTRONICS CO.,LTD. Features Current transfer ratio (CTR 50~600% at I F =5mA, V CE =5V) High isolation voltage between input and output (Viso=5000 V rms ) Creepage distance >7.62 mm Operating temperature up to +110 C Compact

More information

High-speed switching diodes. Type number Package Configuration Package NXP JEITA JEDEC

High-speed switching diodes. Type number Package Configuration Package NXP JEITA JEDEC Rev. 8 18 November 2010 Product data sheet 1. Product profile 1.1 General description, encapsulated in small Surface-Mounted Device (SMD) plastic packages. Table 1. Product overview Type number Package

More information

Schottky Rectifier, 100 A

Schottky Rectifier, 100 A Schottky Rectifier, A VS-BGQ Cathode Anode PowerTab PRODUCT SUMMARY Package PowerTab I F(AV) A V R V V F at I F 0.82 V I RM 180 ma at 125 C T J max. 175 C Diode variation Single die E AS 9 mj FEATURES

More information

High Speed Infrared Emitting Diode, 870 nm, GaAlAs Double Hetero

High Speed Infrared Emitting Diode, 870 nm, GaAlAs Double Hetero TSFF55 High Speed Infrared Emitting Diode, 87 nm, GaAlAs Double Hetero 26 DESCRIPTION TSFF55 is an infrared, 87 nm emitting diode in GaAlAs double hetero (DH) technology with high radiant power and high

More information

High-Bandwidth, Low Voltage, Dual SPDT Analog Switches

High-Bandwidth, Low Voltage, Dual SPDT Analog Switches DG, DG High-Bandwidth, Low Voltage, Dual SPDT Analog Switches DESCRIPTION The DG/DG are monolithic CMOS dual single-pole/double-throw (SPDT) analog switchs. They are specifically designed for low-voltage,

More information

Silicon PIN Photodiode

Silicon PIN Photodiode Silicon PIN Photodiode DESCRIPTION 94 8632 is a PIN photodiode with high speed and high radiant sensitivity in a clear, side view plastic package. It is sensitive to visible and near infrared radiation.

More information

High Performance Schottky Rectifier, 1 A

High Performance Schottky Rectifier, 1 A High Performance Schottky Rectifier, A VS-MQNPbF Cathode Anode DO-24AC (SMA) PRODUCT SUMMARY Package DO-24AC (SMA) I F(AV) A V R V V F at I F.78 V I RM ma at 25 C T J max. 5 C Diode variation Single die

More information

DVIULC6-4SC6. Ultra low capacitance ESD protection. Main applications. Complies with these standards: Description. Benefits. Features.

DVIULC6-4SC6. Ultra low capacitance ESD protection. Main applications. Complies with these standards: Description. Benefits. Features. Ultra low capacitance ESD protection Main applications DVI ports up to 1.65 Gb/s HDMI ports up to 1.65 Gb/s IEEE 1394a and IEEE 1394b ports up to 1.6 Gb/s USB2.0 ports up to 480 Mb/s (high speed), backwards

More information

45 V, 100 ma NPN/PNP general-purpose transistor

45 V, 100 ma NPN/PNP general-purpose transistor Rev. 4 18 February 29 Product data sheet 1. Product profile 1.1 General description NPN/PNP general-purpose transistor pair in a very small SOT363 (SC-88) Surface-Mounted Device (SMD) plastic package.

More information

1 TO 4 CLOCK BUFFER ICS551. Description. Features. Block Diagram DATASHEET

1 TO 4 CLOCK BUFFER ICS551. Description. Features. Block Diagram DATASHEET DATASHEET 1 TO 4 CLOCK BUFFER ICS551 Description The ICS551 is a low cost, high-speed single input to four output clock buffer. Part of IDT s ClockBlocks TM family, this is our lowest cost, small clock

More information

PHOTOTRANSISTOR OPTOCOUPLERS

PHOTOTRANSISTOR OPTOCOUPLERS MCT2 MCT2E MCT20 MCT27 WHITE PACKAGE (-M SUFFIX) BLACK PACKAGE (NO -M SUFFIX) DESCRIPTION The MCT2XXX series optoisolators consist of a gallium arsenide infrared emitting diode driving a silicon phototransistor

More information

Surface Mount Schottky Barrier

Surface Mount Schottky Barrier FEATURES - Very low profile - typical height of 0.68mm - Low power loss, high efficiency - Ideal for automated placement - Moisture sensitivity level: level, per J-STD-020 - Compliant to RoHS Directive

More information

STF202-22. USB Filter with ESD Protection

STF202-22. USB Filter with ESD Protection STF202-22 USB Filter with ESD Protection This device is designed for applications requiring Line Termination, EMI Filtering and ESD Protection. It is intended for use in upstream USB ports, ellular phones,

More information

Description YD/T 950. YD/T 993 YD/T 1082 GR 1089 Inter-building GR 1089 Intra-building IEC 61000-4-2 V V DRM. @250V/µs I H

Description YD/T 950. YD/T 993 YD/T 1082 GR 1089 Inter-building GR 1089 Intra-building IEC 61000-4-2 V V DRM. @250V/µs I H SDP Series - SOT23-5 RoHS Pb e3 Description This new SIDACtor series is targeted for the tertiary or line driver side protection position for VDSL2+, ADSL2 applications and general I/O protection functions.

More information

SN28838 PAL-COLOR SUBCARRIER GENERATOR

SN28838 PAL-COLOR SUBCARRIER GENERATOR Solid-State Reliability Surface-Mount Package NS PACKAE (TOP VIEW) description The SN28838 is a monolithic integrated circuit designed to interface with the SN28837 PALtiming generator in order to generate

More information

SiGe:C Low Noise High Linearity Amplifier

SiGe:C Low Noise High Linearity Amplifier Rev. 2 21 February 2012 Product data sheet 1. Product profile 1.1 General description The is a low noise high linearity amplifier for wireless infrastructure applications. The LNA has a high input and

More information

Schottky Rectifier, 1 A

Schottky Rectifier, 1 A Schottky Rectifier, 1 A BQPbF FEATURES SMB Cathode Anode Small foot print, surface mountable Low forward voltage drop High frequency operation Available RoHS* COMPLIANT Guard ring for enhanced ruggedness

More information

700 MHz, -3 db Bandwidth; Dual SPDT Analog Switch

700 MHz, -3 db Bandwidth; Dual SPDT Analog Switch 7 MHz, -3 db Bandwidth; Dual SPDT Analog Switch DESCRIPTION is a low R ON, high bandwidth analog switch configured in dual SPDT. It achieves 5.5 Ω switch on resistance, greater than 7 MHz -3 db bandwidth

More information

LOW POWER SCHOTTKY. http://onsemi.com GUARANTEED OPERATING RANGES ORDERING INFORMATION

LOW POWER SCHOTTKY. http://onsemi.com GUARANTEED OPERATING RANGES ORDERING INFORMATION The TTL/MSI SN74LS151 is a high speed 8-input Digital Multiplexer. It provides, in one package, the ability to select one bit of data from up to eight sources. The LS151 can be used as a universal function

More information

ICS650-44 SPREAD SPECTRUM CLOCK SYNTHESIZER. Description. Features. Block Diagram DATASHEET

ICS650-44 SPREAD SPECTRUM CLOCK SYNTHESIZER. Description. Features. Block Diagram DATASHEET DATASHEET ICS650-44 Description The ICS650-44 is a spread spectrum clock synthesizer intended for video projector and digital TV applications. It generates three copies of an EMI optimized 50 MHz clock

More information

Silicon PIN Photodiode

Silicon PIN Photodiode Silicon PIN Photodiode DESCRIPTION 94 8583 BPW34 is a PIN photodiode with high speed and high radiant sensitivity in miniature, flat, top view, clear plastic package. It is sensitive to visible and near

More information

2N6387, 2N6388. Plastic Medium-Power Silicon Transistors DARLINGTON NPN SILICON POWER TRANSISTORS 8 AND 10 AMPERES 65 WATTS, 60-80 VOLTS

2N6387, 2N6388. Plastic Medium-Power Silicon Transistors DARLINGTON NPN SILICON POWER TRANSISTORS 8 AND 10 AMPERES 65 WATTS, 60-80 VOLTS 2N6388 is a Preferred Device Plastic MediumPower Silicon Transistors These devices are designed for generalpurpose amplifier and lowspeed switching applications. Features High DC Current Gain h FE = 2500

More information

Aluminum Electrolytic Capacitors Axial Miniature, Long-Life

Aluminum Electrolytic Capacitors Axial Miniature, Long-Life Aluminum Electrolytic Capacitors Axial Miniature, Long-Life 38 AML 0 ASM smaller dimensions Fig. QUICK REFERENCE DATA DESCRIPTION Nominal case sizes (Ø D x L in mm) 6.3 x.7 to 0 x 5 VALUE 0 x 30 to x 38

More information

AN96-07. Surging Ideas TVS Diode Application Note PROTECTION PRODUCTS. TRANSIENT IMMUNITY STANDARDS: IEC 61000-4-x

AN96-07. Surging Ideas TVS Diode Application Note PROTECTION PRODUCTS. TRANSIENT IMMUNITY STANDARDS: IEC 61000-4-x TRANSIENT IMMUNITY STANDARDS: IEC 61000-4-x On January 1, 1996, exports into Europe began facing some tough transient immunity standards. The International Electrotechnical Commission (IEC), a worldwide

More information

CAT4101TV. 1 A Constant-Current LED Driver with PWM Dimming

CAT4101TV. 1 A Constant-Current LED Driver with PWM Dimming A Constant-Current LED Driver with PWM Dimming Description The CAT4 is a constant current sink driving a string of high brightness LEDs up to A with very low dropout of.5 V at full load. It requires no

More information

Dual-Host / Dual-SIM Card Crosspoint Analog Switch

Dual-Host / Dual-SIM Card Crosspoint Analog Switch FSA2866 Dual-Host / Dual-SIM Card Crosspoint Analog Switch Features Switch Type 2x2 Crosspoint Switch Input Type Data Input Signal Range 0 to V CC V CC 1.65V to 4.30V R ON Data 2Ω (Typical) VSIM 2Ω (Typical)

More information

ICS650-01 SYSTEM PERIPHERAL CLOCK SOURCE. Description. Features. Block Diagram DATASHEET

ICS650-01 SYSTEM PERIPHERAL CLOCK SOURCE. Description. Features. Block Diagram DATASHEET DATASHEET ICS650-01 Description The ICS650-01 is a low-cost, low-jitter, high-performance clock synthesizer for system peripheral applications. Using analog/digital Phase-Locked Loop (PLL) techniques,

More information

DG2515, DG2516. 3-Ω, 235-MHz Bandwidth, Dual SPDT Analog Switch. Vishay Siliconix. Not for New Design. RoHS COMPLIANT DESCRIPTION FEATURES BENEFITS

DG2515, DG2516. 3-Ω, 235-MHz Bandwidth, Dual SPDT Analog Switch. Vishay Siliconix. Not for New Design. RoHS COMPLIANT DESCRIPTION FEATURES BENEFITS Not for New Design DG, DG -Ω, -MHz Bandwidth, Dual SPDT Analog Switch DESCRIPTION The DG, DG are low-voltage dual single-pole/ double-throw monolithic CMOS analog switches. Designed to operate from.8 V

More information

Power MOSFET FEATURES. IRF520PbF SiHF520-E3 IRF520 SiHF520. PARAMETER SYMBOL LIMIT UNIT Drain-Source Voltage V DS 100 V Gate-Source Voltage V GS ± 20

Power MOSFET FEATURES. IRF520PbF SiHF520-E3 IRF520 SiHF520. PARAMETER SYMBOL LIMIT UNIT Drain-Source Voltage V DS 100 V Gate-Source Voltage V GS ± 20 Power MOSFET PRODUCT SUMMARY (V) 100 R DS(on) ( ) = 0.7 Q g (Max.) (nc) 16 Q gs (nc) 4.4 Q gd (nc) 7.7 Configuration Single TO0AB G DS ORDERING INFORMATION Package Lead (Pb)free SnPb G D S NChannel MOSFET

More information

MC10SX1190. Fibre Channel Coaxial Cable Driver and Loop Resiliency Circuit

MC10SX1190. Fibre Channel Coaxial Cable Driver and Loop Resiliency Circuit Fibre Channel Coaxial Cable Driver and Loop Resiliency Circuit Description The MC10SX1190 is a differential receiver, differential transmitter specifically designed to drive coaxial cables. It incorporates

More information

Optocoupler, Photodarlington Output, Dual Channel, SOIC-8 Package

Optocoupler, Photodarlington Output, Dual Channel, SOIC-8 Package Optocoupler, Photodarlington Output, i179042 DESCRIPTION A1 C 2 A3 C4 8 C 7E 6C 5E The ILD233T is a high current transfer ratio (CTR) optocoupler. It has a gallium arsenide infrared LED emitter and silicon

More information

1 pc Charge Injection, 100 pa Leakage CMOS 5 V/5 V/3 V 4-Channel Multiplexer ADG604

1 pc Charge Injection, 100 pa Leakage CMOS 5 V/5 V/3 V 4-Channel Multiplexer ADG604 a FEATURES 1 pc Charge Injection (Over the Full Signal Range) 2.7 V to 5.5 V ual Supply 2.7 V to 5.5 ingle Supply Automotive Temperature Range: 4 C to +125 C 1 pa Max @ 25 C Leakage Currents 85 Typ On

More information

Symbol Parameters Units Frequency Min. Typ. Max. 850 MHz 14.8 16.3 17.8

Symbol Parameters Units Frequency Min. Typ. Max. 850 MHz 14.8 16.3 17.8 Product Description Sirenza Microdevices SGC-689Z is a high performance SiGe HBT MMIC amplifier utilizing a Darlington configuration with a patented active-bias network. The active bias network provides

More information

Optocoupler, Phototransistor Output, with Base Connection

Optocoupler, Phototransistor Output, with Base Connection CNY7 Optocoupler, Phototransistor FEATURES Isolation test voltage 5 V RMS A 6 B Long term stability i79 C NC 5 C E Industry standard dual-in-line package Lead (Pb-free component Component in accordance

More information

TIP41, TIP41A, TIP41B, TIP41C (NPN); TIP42, TIP42A, TIP42B, TIP42C (PNP) Complementary Silicon Plastic Power Transistors

TIP41, TIP41A, TIP41B, TIP41C (NPN); TIP42, TIP42A, TIP42B, TIP42C (PNP) Complementary Silicon Plastic Power Transistors TIP41, TIP41A, TIP41B, TIP41C (NPN); TIP42, TIP42A, TIP42B, TIP42C (PNP) Complementary Silicon Plastic Power Transistors Designed for use in general purpose amplifier and switching applications. Features

More information

TSM2N7002K 60V N-Channel MOSFET

TSM2N7002K 60V N-Channel MOSFET SOT-23 SOT-323 Pin Definition: 1. Gate 2. Source 3. Drain PRODUCT SUMMARY V DS (V) R DS(on) (Ω) I D (ma) 5 @ V GS = 10V 100 60 5.5 @ V GS = 5V 100 Features Low On-Resistance ESD Protection High Speed Switching

More information

S112-XHS. Description. Features. Agency Approvals. Applications. Absolute Maximum Ratings. Schematic Diagram. Ordering Information

S112-XHS. Description. Features. Agency Approvals. Applications. Absolute Maximum Ratings. Schematic Diagram. Ordering Information Description Features The S112-X is a bi-directional, single-pole, single-throw, normally open multipurpose solid-state relay. The circuit is composed of one input IR LED with a series limiting resistor

More information

Features Benefits Description TO-247AC (Modified) Absolute Maximum Ratings Parameter Max Units

Features Benefits Description TO-247AC (Modified) Absolute Maximum Ratings Parameter Max Units Bulletin PD -.338 rev. B /4 HEXFRED TM HFA5PB6 Ultrafast, Soft Recovery Diode Features Ultrafast Recovery Ultrasoft Recovery Very Low I RRM Very Low Q rr Specified at Operating Conditions Benefits Reduced

More information

LOW POWER NARROWBAND FM IF

LOW POWER NARROWBAND FM IF Order this document by MC336B/D The MC336B includes an Oscillator, Mixer, Limiting Amplifier, Quadrature Discriminator, Active Filter, Squelch, Scan Control and Mute Switch. This device is designed for

More information

Characteristics Values Units. Rectangular waveform 0.5 A. range - 55 to 150 C

Characteristics Values Units. Rectangular waveform 0.5 A. range - 55 to 150 C Bulletin I075 rev. C 05/06 IR0530CSPTRPbF 0.5 Amp 30 Volt Features Ultra Low V F To Footprint Area Very Low Profile (

More information

ULN2801A, ULN2802A, ULN2803A, ULN2804A

ULN2801A, ULN2802A, ULN2803A, ULN2804A ULN2801A, ULN2802A, ULN2803A, ULN2804A Eight Darlington array Datasheet production data Features Eight Darlington transistors with common emitters Output current to 500 ma Output voltage to 50 V Integral

More information

AP1509. 150KHz, 2A PWM BUCK DC/DC CONVERTER. Description. Pin Assignments V IN. Applications. Features. (Top View) GND GND. Output AP1509 GND GND

AP1509. 150KHz, 2A PWM BUCK DC/DC CONVERTER. Description. Pin Assignments V IN. Applications. Features. (Top View) GND GND. Output AP1509 GND GND Description Pin Assignments The series are monolithic IC designed for a stepdown DC/DC converter, and own the ability of driving a 2A load without additional transistor. It saves board space. The external

More information

Optocoupler, Phototransistor Output, With Base Connection

Optocoupler, Phototransistor Output, With Base Connection IL/ IL2/ IL5 Optocoupler, Phototransistor Output, With Base Connection Features Current Transfer Ratio (see order information) Isolation Test Voltage 5300 V RMS Lead-free component Component in accordance

More information

Power MOSFET FEATURES. IRF610PbF SiHF610-E3 IRF610 SiHF610. PARAMETER SYMBOL LIMIT UNIT Drain-Source Voltage V DS 200 V Gate-Source Voltage V GS ± 20

Power MOSFET FEATURES. IRF610PbF SiHF610-E3 IRF610 SiHF610. PARAMETER SYMBOL LIMIT UNIT Drain-Source Voltage V DS 200 V Gate-Source Voltage V GS ± 20 Power MOSFET PRODUCT SUMMARY (V) 00 R DS(on) ( ) = 1.5 Q g (Max.) (nc) 8. Q gs (nc) 1.8 Q gd (nc) 4.5 Configuration Single FEATURES Dynamic dv/dt Rating Repetitive Avalanche Rated Fast Switching Ease of

More information

BAS16 series. 1. Product profile. High-speed switching diodes. 1.1 General description. 1.2 Features and benefits. 1.

BAS16 series. 1. Product profile. High-speed switching diodes. 1.1 General description. 1.2 Features and benefits. 1. Rev. 6 4 September 04 Product data sheet. Product profile. General description, encapsulated in small Surface-Mounted Device (SMD) plastic packages. Table. Product overview Type number Package Configuration

More information

TSM020N03PQ56 30V N-Channel MOSFET

TSM020N03PQ56 30V N-Channel MOSFET PDFN56 Pin Definition: 1. Source 8. Drain 2. Source 7. Drain 3. Source 6. Drain 4. Gate 5. Drain Key Parameter Performance Parameter Value Unit V DS 30 V R DS(on) (max) V GS = 10V 2 V GS = 4.5V 3 mω Q

More information

UNISONIC TECHNOLOGIES CO., LTD 50N06 Power MOSFET

UNISONIC TECHNOLOGIES CO., LTD 50N06 Power MOSFET UNISONIC TECHNOLOGIES CO., LTD 50N06 50 Amps, 60 Volts N-CHANNEL POWER MOSFET DESCRIPTION TO-263 TO-25 The UTC 50N06 is three-terminal silicon device with current conduction capability of about 50A, fast

More information

3-input EXCLUSIVE-OR gate. The 74LVC1G386 provides a 3-input EXCLUSIVE-OR function.

3-input EXCLUSIVE-OR gate. The 74LVC1G386 provides a 3-input EXCLUSIVE-OR function. Rev. 02 3 September 2007 Product data sheet 1. General description The provides a 3-input EXCLUSIVE-OR function. The input can be driven from either 3.3 or 5 V devices. This feature allows the use of these

More information

2N3906. General Purpose Transistors. PNP Silicon. Pb Free Packages are Available* http://onsemi.com. Features MAXIMUM RATINGS

2N3906. General Purpose Transistors. PNP Silicon. Pb Free Packages are Available* http://onsemi.com. Features MAXIMUM RATINGS 2N396 General Purpose Transistors PNP Silicon Features PbFree Packages are Available* COLLECTOR 3 MAXIMUM RATINGS Rating Symbol Value Unit Collector Emitter Voltage V CEO 4 Vdc Collector Base Voltage V

More information

ULN2803A ULN2804A OCTAL PERIPHERAL DRIVER ARRAYS

ULN2803A ULN2804A OCTAL PERIPHERAL DRIVER ARRAYS Order this document by ULN283/D The eight NPN Darlington connected transistors in this family of arrays are ideally suited for interfacing between low logic level digital circuitry (such as TTL, CMOS or

More information

BLL6G1214L-250. 1. Product profile. LDMOS L-band radar power transistor. 1.1 General description. 1.2 Features and benefits. 1.

BLL6G1214L-250. 1. Product profile. LDMOS L-band radar power transistor. 1.1 General description. 1.2 Features and benefits. 1. BLL6G1214L-25 Rev. 1 16 February 212 Preliminary data sheet 1. Product profile 1.1 General description 25 W LDMOS power transistor intended for L-band radar applications in the 1.2 GHz to 1.4 GHz range.

More information

AAT4280 Slew Rate Controlled Load Switch

AAT4280 Slew Rate Controlled Load Switch General Description Features SmartSwitch The AAT4280 SmartSwitch is a P-channel MOSFET power switch designed for high-side load switching applications. The P-channel MOSFET device has a typical R DS(ON)

More information

STB4NK60Z, STB4NK60Z-1, STD4NK60Z STD4NK60Z-1, STP4NK60Z,STP4NK60ZFP

STB4NK60Z, STB4NK60Z-1, STD4NK60Z STD4NK60Z-1, STP4NK60Z,STP4NK60ZFP STB4NK60Z, STB4NK60Z-1, STD4NK60Z STD4NK60Z-1, STP4NK60Z,STP4NK60ZFP N-channel 600 V - 1.76 Ω - 4 A SuperMESH Power MOSFET DPAK - D 2 PAK - IPAK - I 2 PAK - TO-220 - TO-220FP Features Type V DSS R DS(on)

More information

MADR-009190-0001TR. Quad Driver for GaAs FET or PIN Diode Switches and Attenuators Rev. 4. Functional Schematic. Features.

MADR-009190-0001TR. Quad Driver for GaAs FET or PIN Diode Switches and Attenuators Rev. 4. Functional Schematic. Features. Features High Voltage CMOS Technology Four Channel Positive Voltage Control CMOS device using TTL input levels Low Power Dissipation Low Cost Lead-Free SOIC-16 Plastic Package Halogen-Free Green Mold Compound

More information

Baseband delay line QUICK REFERENCE DATA

Baseband delay line QUICK REFERENCE DATA FEATURES Two comb filters, using the switched-capacitor technique, for one line delay time (64 µs) Adjustment-free application No crosstalk between SECAM colour carriers (diaphoty) Handles negative or

More information

Power MOSFET. IRF9520PbF SiHF9520-E3 IRF9520 SiHF9520. PARAMETER SYMBOL LIMIT UNIT Drain-Source Voltage V DS - 100 V Gate-Source Voltage V GS ± 20

Power MOSFET. IRF9520PbF SiHF9520-E3 IRF9520 SiHF9520. PARAMETER SYMBOL LIMIT UNIT Drain-Source Voltage V DS - 100 V Gate-Source Voltage V GS ± 20 Power MOSFET PRODUCT SUMMARY (V) 100 R DS(on) ( ) = 10 V 0.60 Q g (Max.) (nc) 18 Q gs (nc) 3.0 Q gd (nc) 9.0 Configuration Single TO220AB G DS ORDERING INFORMATION Package Lead (Pb)free SnPb G S D PChannel

More information

2N3903, 2N3904. General Purpose Transistors. NPN Silicon. Pb Free Packages are Available* Features. http://onsemi.com MAXIMUM RATINGS

2N3903, 2N3904. General Purpose Transistors. NPN Silicon. Pb Free Packages are Available* Features. http://onsemi.com MAXIMUM RATINGS N393, General Purpose Transistors NPN Silicon Features PbFree Packages are Available* MAXIMUM RATINGS Rating Symbol Value Unit CollectorEmitter Voltage V CEO 4 Vdc CollectorBase Voltage V CBO 6 Vdc EmitterBase

More information

(250 Volts Peak) SEMICONDUCTOR TECHNICAL DATA

(250 Volts Peak) SEMICONDUCTOR TECHNICAL DATA SEMICONDUCTOR TECHNICAL DATA Order this document by MOC00/D (0 Volts Peak) The MOC00 Series consists of gallium arsenide infrared emitting diodes, optically coupled to silicon bilateral switch and are

More information

CM1402. SIM Card EMI Filter Array with ESD Protection

CM1402. SIM Card EMI Filter Array with ESD Protection SIM ard EMI Filter Array with ESD Protection Product Description The M1402 is an EMI filter array with ESD protection, which integrates three pi filters ( R ) and two additional channels of ESD protection.

More information

IP4251/52/53/54-TTL. Integrated 4-, 6- and 8-channel passive filter network with ESD protection

IP4251/52/53/54-TTL. Integrated 4-, 6- and 8-channel passive filter network with ESD protection with ESD protection Rev. 2 5 May 2011 Product data sheet 1. Product profile 1.1 General description The devices are 4-, 6- and 8-channel RC low-pass filter arrays which are designed to provide filtering

More information

P D 215 1.25 Operating Junction Temperature T J 200 C Storage Temperature Range T stg 65 to +150 C

P D 215 1.25 Operating Junction Temperature T J 200 C Storage Temperature Range T stg 65 to +150 C SEMICONDUCTOR TECHNICAL DATA Order this document by /D The RF Line The is designed for output stages in band IV and V TV transmitter amplifiers. It incorporates high value emitter ballast resistors, gold

More information

AN3353 Application note

AN3353 Application note Application note IEC 61000-4-2 standard testing Introduction This Application note is addressed to technical engineers and designers to explain how STMicroelectronics protection devices are tested according

More information

MC14001B Series. B Suffix Series CMOS Gates MC14001B, MC14011B, MC14023B, MC14025B, MC14071B, MC14073B, MC14081B, MC14082B

MC14001B Series. B Suffix Series CMOS Gates MC14001B, MC14011B, MC14023B, MC14025B, MC14071B, MC14073B, MC14081B, MC14082B MC4B Series BSuffix Series CMOS Gates MC4B, MC4B, MC4B, MC4B, MC4B, MC4B, MC4B, MC4B The B Series logic gates are constructed with P and N channel enhancement mode devices in a single monolithic structure

More information

SC728/SC729. 2A Low Vin, Very Low Ron Load Switch. POWER MANAGEMENT Features. Description. Applications. Typical Application Circuit SC728 / SC729

SC728/SC729. 2A Low Vin, Very Low Ron Load Switch. POWER MANAGEMENT Features. Description. Applications. Typical Application Circuit SC728 / SC729 POWER MANAGEMT Features Input Voltage Range 1.1V to 2A Continuous Output Current Ultra-Low Ron 36mΩ Automatic Output Discharge Circuit Fast Turn-on Option With No Output Discharge Circuit SC728 Extended

More information

Standard Recovery Diodes, Generation 2 DO-5 (Stud Version), 95 A

Standard Recovery Diodes, Generation 2 DO-5 (Stud Version), 95 A Standard Recovery Diodes, Generation 2 DO-5 (Stud Version), 95 A 95PF(R)... DO-203AB (DO-5) PRODUCT SUMMARY I F(AV) Package Circuit configuration 95PF(R)...W DO-203AB (DO-5) 95 A DO-203AB (DO-5) Single

More information

MADR-009443-0001TR. Quad Driver for GaAs FET or PIN Diode Switches and Attenuators. Functional Schematic. Features. Description. Pin Configuration 2

MADR-009443-0001TR. Quad Driver for GaAs FET or PIN Diode Switches and Attenuators. Functional Schematic. Features. Description. Pin Configuration 2 Features Functional Schematic High Voltage CMOS Technology Four Channel Positive Voltage Control CMOS device using TTL input levels Low Power Dissipation Low Cost 4x4 mm, 20-lead PQFN Package 100% Matte

More information

DG2302. High-Speed, Low r ON, SPST Analog Switch. Vishay Siliconix. (1-Bit Bus Switch with Level-Shifter) RoHS* COMPLIANT DESCRIPTION FEATURES

DG2302. High-Speed, Low r ON, SPST Analog Switch. Vishay Siliconix. (1-Bit Bus Switch with Level-Shifter) RoHS* COMPLIANT DESCRIPTION FEATURES High-Speed, Low r ON, SPST Analog Switch (1-Bit Bus Switch with Level-Shifter) DG2302 DESCRIPTION The DG2302 is a high-speed, 1-bit, low power, TTLcompatible bus switch. Using sub-micron CMOS technology,

More information

STGB10NB37LZ STGP10NB37LZ

STGB10NB37LZ STGP10NB37LZ STGB10NB37LZ STGP10NB37LZ 10 A - 410 V internally clamped IGBT Features Low threshold voltage Low on-voltage drop Low gate charge TAB TAB High current capability High voltage clamping feature Applications

More information

2N4921G, 2N4922G, 2N4923G. Medium-Power Plastic NPN Silicon Transistors 1.0 AMPERE GENERAL PURPOSE POWER TRANSISTORS 40 80 VOLTS, 30 WATTS

2N4921G, 2N4922G, 2N4923G. Medium-Power Plastic NPN Silicon Transistors 1.0 AMPERE GENERAL PURPOSE POWER TRANSISTORS 40 80 VOLTS, 30 WATTS ,, Medium-Power Plastic NPN Silicon Transistors These highperformance plastic devices are designed for driver circuits, switching, and amplifier applications. Features Low Saturation Voltage Excellent

More information

STP62NS04Z N-CHANNEL CLAMPED 12.5mΩ - 62A TO-220 FULLY PROTECTED MESH OVERLAY MOSFET

STP62NS04Z N-CHANNEL CLAMPED 12.5mΩ - 62A TO-220 FULLY PROTECTED MESH OVERLAY MOSFET N-CHANNEL CLAMPED 12.5mΩ - 62A TO-220 FULLY PROTECTED MESH OVERLAY MOSFET TYPE V DSS R DS(on) I D STP62NS04Z CLAMPED

More information

CAT4139. 22 V High Current Boost White LED Driver

CAT4139. 22 V High Current Boost White LED Driver 22 V High Current Boost White LED Driver Description The CAT4139 is a DC/DC step up converter that delivers an accurate constant current ideal for driving LEDs. Operation at a fixed switching frequency

More information

STPS40L15CW. 2 x 20 Amps SCHOTTKY RECTIFIER. Case Styles. I F(AV) = 40Amp V R = 15V. Bulletin PD-20622 rev. B 10/06. Description/ Features

STPS40L15CW. 2 x 20 Amps SCHOTTKY RECTIFIER. Case Styles. I F(AV) = 40Amp V R = 15V. Bulletin PD-20622 rev. B 10/06. Description/ Features Bulletin PD-20622 rev. B 0/06 STPS40L5CW SCHOTTKY RECTIFIER 2 x 20 Amps I F(AV) = 40Amp V R = 5V Major Ratings and Characteristics Characteristics Values Units I F(AV) Rectangular 40 A waveform V RRM 5

More information