565T. Indicator rose with emergency device. Lever handle retracts latchbolt only.

Transcription

1 SS Evolution & Modular Toilet lock pplication Locks for bathroom and toilet doors in schools, hospitals, sheltered housing, factories, hotels etc. an be opened in an emergency by screwdriver from outside. Incorporates red/white indicator on both sides. or finishes see page :6. hand and door thickness. 565T î T Evolution toilet lock Toilet lock made up from upright mortice sash lock and 65 accessory set. Latchbolt reversible without opening lockcase. Lockcase is supplied with striking plate. vailable with either 5mm or 7mm backset. Indicator rose with emergency device. retracts latchbolt only. Indicator rose with emergency device. retracts latchbolt only. Dimensions on page :6 î 565T Modular toilet lock Toilet lock made up from 765 upright mortice sash lock and 65 accessory set. Latchbolt reversible without opening lockcase. Lockcase is supplied with striking plate. vailable with either 5mm or 7mm backset. Indicator rose with emergency device. retracts latchbolt only. Indicator rose with emergency device. retracts latchbolt only. Dimensions on page :6 Reference: : - 7 :

2 SS Evolution & Modular lip-up handle toilet locks pplication Locks for bathroom and toilet doors in schools, hospitals, sheltered housing, factories, hotels etc. an be opened in an emergency by screwdriver from outside. Incorporates red/white indicator on both sides. or finishes see page :6. hand, direction of door opening and door thickness. 9565T î 9T Evolution toilet lock with flip-up handle Toilet lock made up from upright mortice lock and 9565T accessory set. Especially suitable for disabled people. Locked by raising inner handle. Unlocked by depressing inner handle in the normal way. Latchbolt reversible without opening lockcase. Lockcase is supplied with striking plate. vailable with either 5mm or 7mm backset. When ordering 9565T accessory set please specify door opening in or out as well as door handing. Indicator rose with emergency device. retracts latchbolt only. flips up to throw When moved down, first retracts deadbolt, then Dimensions on page :6 9565T Modular Toilet Lock Uses Modular 765 sash lock and 9565T accessory set. 5mm and 7mm backsets available. î 9T- Evolution toilet lock with flip-up handle Dimensions on page :6 Toilet lock made up from upright mortice lock and 9566T- accessory set. Especially suitable for disabled people. Locked by raising inner handle. Unlocked by depressing inner handle in the normal way. Lockcase is supplied with striking plate. vailable with either 5mm or 7mm backset. When ordering 9T- accessory set please specify door opening in or out as well as door handing. May also be used with sash lock, in which case an additional half-set of lever handles is required for the external side of the door. 9566T- Modular Toilet Lock Uses Modular 7 deadlock and 9566T- accessory set. 5mm and 7mm backsets available. Indicator rose with emergency device. flips up to throw When moved down, first retracts deadbolt, then Reference: : - 7 :

3 D5 Euro Sash lock pplication Sash locks are suitable for entrance doors to offices, private houses, industrial premises, shops and similar. ylinders SS 5-Pin SS lexcore SS SS Twin ombi Euro Profile SS Twin 7 SS LIQ an be incorporated into an SS master key system vailable with single cylinder and thumbturn, or alternatively with double cylinders or single cylinder only. Uses Euro profile cylinders. Supplied as standard with striking plate. oth square and round faceplates are available. mm handle follower. Key can be removed in locked or unlocked position. or finishes see page :6. door thickness. î D55 sash lock Double-throw deadbolt thrown up to mm by two 6 turns of key or thumbturn. Latchbolt reversible without opening lockcase. Key operates deadbolt and Turn operates deadbolt and Usable with DIN Severe Duty rated handles. vailable with 6mm backset. (-) (/) () (-G) (-) (-) (-) Product has been successfully typetested for conformity to S EN 9. Regular audit testing is undertaken. Dimensions on page :6 Reference: :5-7 :

4 D5 Euro Deadlock pplication Deadlocks are suitable for swing doors in corridors and entrances, and as a secondary lock on any door. vailable with single cylinder and thumbturn, or alternatively with double cylinders or single cylinder only. Uses Euro profile cylinders. Supplied as standard with striking plate. oth square and round faceplates are available. ylinders SS 5-Pin SS lexcore SS SS Twin ombi Euro Profile SS Twin 7 SS LIQ an be incorporated into an SS master key system Key can be removed in locked or unlocked position. or finishes see page :6. door thickness. î D5 deadlock Double-throw deadbolt thrown up to mm by two 6 turns of key or thumbturn. vailable with 6mm backset. Key operates Turn operates (-) (/) () (-G) (-) (-) (-) Product has been successfully typetested for conformity to S EN 9. Regular audit testing is undertaken. Dimensions on page :6 Reference: :6-7 :

5 D5 Euro athroom lock pplication athroom Locks are suitable for bathroom and toilet doors. May be fitted with standard DIN dimensioned door furniture. mm handle and turn followers. Supplied as standard with striking plate. oth square and round faceplates are available. or finishes see page :6. door thickness. î D5 bathroom lock Deadbolt operated by internal thumbturn. Latchbolt reversible without opening lockcase. vailable with 6mm backset. Indicator rose with emergency device. retracts latchbolt only. Turn operates deadbolt and indicator. retracts latchbolt only. (-) (/) () (-G) G (-) (-) (-) Product has been successfully typetested for conformity to S EN 9. Regular audit testing is undertaken. Dimensions on page :6 Reference: :7-7 :

6 D5 Euro Latch pplication Latches are suitable for doors which do not need to be locked Supplied as standard with striking plate. oth square and round faceplates are available. or finishes see page :6. door thickness. î D5 latch Latchbolt operated by lever handles. Latchbolt reversible without opening lockcase. Usable with DIN Severe Duty rated handles. vailable with 6mm backset. (-) (/) () (-G) (-) (-) (-) Product has been successfully typetested for conformity to S EN 9. Regular audit testing is undertaken. Dimensions on page :6 Reference: : - 7 :

7 SS ompact Sash lock & deadlock pplication Sash locks are suitable for entrance doors to offices, private houses, industrial premises, shops and similar. Deadlocks are suitable for swing doors in corridors and entrances, and as a secondary lock on any door. ylinders UK Oval or Euro Profile SS 5-Pin SS lexcore SS SS Twin ombi SS Twin 7 SS LIQ an be incorporated into an SS master key system vailable with single cylinder and thumbturn, or alternatively with double cylinders or single cylinder only. Uses either Euro or UK Oval profile cylinders. Supplied as standard with security box striking plate. oth square and rounded faceplates are available as standard. or finishes see page :6. door thickness. î 65 sash lock ardened steel deadbolt thrown mm by 6 turn of key or thumbturn. Usable with DIN Severe Duty rated handles. Latchbolt reversible without opening lockcase. vailable with 57mm backset. Key operates Turn operates Dimensions on page :6 î deadlock ardened steel deadbolt thrown mm by 6 turn of key or thumbturn. vailable with 57mm backset. Key operates Turn operates Dimensions on page :6 Reference: :9-7 :

8 SS ompact Latch & bathroom lock pplication Latches are suitable for doors which do not need to be locked. athroom Locks are suitable for bathroom and toilet doors. athroom Locks may be fitted with the SS Distinction 555T or the SS 6 accessories, which incorporate a red/white indicator and thumbturn. lternatively, standard UK dimensioned door furniture may be fitted. Supplied as standard with striking plate. oth square and rounded faceplates are available as standard. or finishes see page :6. door thickness. î 9 latch Steel latchbolt operated by lever handles. Latchbolt reversible without opening lockcase. Usable with DIN Severe Duty rated handles. vailable with 57mm backset. Dimensions on page :6 î 55T bathroom lock ardened steel deadbolt thrown 6mm by internal thumbturn. Latchbolt reversible without opening lockcase. Note that the handlethumbturn fixing centres are 57mm apart. ccepts bathroom accessories with 5mm square spindle. vailable with 57mm backset. Indicator rose with emergency device. Lever handle retracts latchbolt only. Turn operates deadbolt and indicator. retracts latchbolt only. Dimensions on page :6 Reference: : - 7 :

9 SS ompact Mortice nightlatches pplication Nightlatches are suitable for entrance doors which must lock automatically when the door is closed. ylinders UK Oval or Euro Profile SS 5-Pin SS lexcore SS SS Twin ombi SS Twin 7 SS LIQ an be incorporated into an SS master key system vailable with single cylinder and thumbturn, or alternatively with double cylinders or single cylinder only. Uses either Euro or UK Oval profile cylinders. Supplied as standard with security box striking plate. oth square and rounded faceplates are available as standard. or finishes see page :6. door thickness. î nightlatch with snib lock-back ardened steel mm latchbolt deadlocks automatically when door is closed. old-back snib for locking bolt into lockcase. Latchbolt is easily reversible. vailable with 57mm backset. Latchbolt automatically deadlocked. Key retracts Turn operates Latchbolt held back by snib on faceplate. Dimensions on page :6 î 5 nightlatch without lock-back ardened steel mm latchbolt deadlocks automatically when door is closed. Latchbolt is easily reversible. vailable with 57mm backset. Latchbolt automatically deadlocked. Key retracts Turn operates Dimensions on page :6 Reference: : - 7 :

10 SS ompact Escape nightlatches pplication Suitable for entrance and exit doors which must lock automatically when the door is closed. The lever handle gives fast, safe exit in an emergency. These locks are also ideal for use with electric strikes in access control applications. ylinders UK Oval or Euro Profile SS 5-Pin SS lexcore SS SS Twin ombi SS Twin 7 SS LIQ an be incorporated into an SS master key system vailable with single cylinder. Uses either Euro or UK Oval profile cylinders. Supplied as standard with security box striking plate. oth square and rounded faceplates are available as standard. or finishes see page :6. door thickness. î 6 nightlatch without lock-back ardened steel mm latchbolt deadlocks automatically when door is closed. Latchbolt reversible without opening lockcase. vailable with 57mm backset. î 6 nightlatch with snib lock-back ardened steel mm latchbolt deadlocks automatically when door is closed. old-back snib for locking bolt into lockcase. Latchbolt reversible without opening lockcase. vailable with 57mm backset. Dimensions on page :6 Dimensions on page :6 Latchbolt automatically deadlocked. Key retracts Latchbolt automatically deadlocked. Key retracts Latchbolt held back by snib on faceplate. î 59 nightlatch without lock-back, non-deadlocking ardened steel mm latchbolt without automatic deadlocking. Latchbolt reversible without opening lockcase. vailable with 57mm backset. Dimensions on page :6 Key retracts EMERGENY ESSORIES ll locks on this page may also be used with the 56 emergency exit break dome set. See pages :- for further details. Reference: : - 7 :

11 SS ompact Escape sash lock pplication Escape sash locks are particularly for residential entrance doors, and comply with S 55 Part, section.. (a). Their simple operation makes them ideal for use by the elderly. ylinders UK Oval or Euro Profile SS 5-Pin SS lexcore SS SS Twin ombi SS Twin 7 SS LIQ an be incorporated into an SS master key system vailable with single cylinder only. Uses either Euro or UK Oval profile cylinders. Supplied as standard with security box striking plate. oth square and rounded faceplates are available as standard. Lockcase must be used with a double action handle eg. SS 5. or finishes see page :6. hand, direction of door opening and door thickness. î escape sash lock ardened steel deadbolt thrown 6mm by internal lever handle or by 6 turn of key. Latchbolt reversible without opening lockcase. vailable with 57mm backset. Key operates Pushing handle down retracts deadbolt and Pushing handle up throws Optional indicator shows when deadbolt is thrown. Please note that when specifying split follower locks it is important to state the direction of door opening as well as the handing. See page :59. Dimensions on page :6 Split follower locks Special split spindles must be used where lever handles are fitted to SS Split ollower Locks. SS lever handles are recommended. If other lever handles are used, contact us for advice. Please note that the exact type of spindle to specify varies depending on the lever handle range to be used. See Door urniture section for details. Split follower locks provide different functions on the inside and outside, and the internal handle follower mechanism is not reversible. Therefore when specifying these locks both the door handing ND whether the door opens inwards or outwards MUST be stated. Reference: : - 7 :

12 SS ompact Escape deadlocks pplication Escape deadlocks combine high security with ease of escape in an emergency, and are ideal for perimeter doors in commercial premises. ylinders UK Oval or Euro Profile SS 5-Pin SS lexcore SS SS Twin ombi SS Twin 7 SS LIQ an be incorporated into an SS master key system 69 available with double cylinder and 69 available with single cylinder only. Uses either Euro or UK Oval profile cylinders. Supplied as standard with security box striking plate. oth square and rounded faceplates are available as standard. 69 lockcase must be used with a double action handle eg. SS 5. or finishes see page :6. door thickness. î 69 escape deadlock ardened steel deadbolt thrown 6mm by 6 turn of key. May be withdrawn by lever handle. vailable with 57mm backset. Key operates Key operates retracts Dimensions on page :6 î 69 escape deadlock ardened steel deadbolt thrown 6mm by internal lever handle or by 6 turn of key. vailable with 57mm backset. Key operates Pushing handle down retracts Pushing handle up throws Optional indicator shows when deadbolt is thrown. Dimensions on page :6 Reference: : - 7 :

13 Special purpose locks Narrow profile hookbolt lock pplication Special high security hook bolt lock for narrow profile doors. Recommended for shop doors, as well as other glazed doors where a higher degree of security is required. ylinders Scandinavian Oval SS 5-Pin SS lexcore SS SS Twin ombi SS Twin 7 SS LIQ an be incorporated into an SS master key system vailable with double cylinders and accessories, or alternatively with single cylinder only. Supplied as standard without striking plate. Optional high security striking plate (Ref: 6 97) available. ylinder and accessories bolt through lockcase for added strength. Key can be removed in locked or unlocked position. or finishes see page :6. door thickness. î 77 hookbolt lock Lock is key operated on either side of door. Lock has removable faceplate and a swing type hookbolt which is locked by a single 6 turn of key. Special striking plate with countersunk fixing in narrow profile door frames of steel or light metal. Lockcase and striking plate of bright zinc plated steel. ylinder and accessories chrome plated. Key operates hookbolt. (-) (/) () (-G) Key operates hookbolt. No thumbturn option available. (-) (-) (-) Product has been successfully typetested for conformity to S EN 9. Regular audit testing is undertaken. vailable with mm backset only. Dimensions on page :6 Reference: :5-7 :

14 Special purpose locks Narrow profile nightlatch pplication Locks for narrow stiled entrance doors where automatic locking is required when door is closed. ylinders Scandinavian Oval SS 5-Pin SS lexcore SS SS Twin ombi SS Twin 7 SS LIQ an be incorporated into an SS master key system vailable with single cylinder and thumbturn, or alternatively with double cylinders or single cylinder only. Optional striking plate (Ref. 6 59) available. ylinder and accessories bolt through lockcase for added strength. Key can only be removed in locked position. rass or finishes see page :6. hand and door thickness. î 5 nightlatch with key lock-back olt deadlocks automatically when door is closed. Key for locking bolt into lockcase. vailable with mm backset only. Latchbolt automatically deadlocked. Key retracts Turn retracts Latchbolt held back by key in faceplate. (-) (/) () (-G) (-) (-) (-) Product has been successfully typetested for conformity to S EN 9. Regular audit testing is undertaken. Dimensions on page :6 (-) (/) () (-G) (-) (-) (-) 75 (-) (/) () (-G) (-) (-) (-) 76 (-) (/) () (-G) (-) (-) (-) 7 (-) (/) () (-G) (-) (-) (-) 79 Reference: :6-7 :

15 Special purpose locks Narrow profile escape nightlatch pplication Locks for doors with narrow stiles offering security but allowing unrestricted exit. Ideally suited for exit doors where the SS Evolution or Modular lockcase is too large for the door stile. Microswitch can be fitted to enable an alarm to be activated by use of handle. Latchbolt deadlocks automatically when door is closed. vailable with lever handle inside, ref 559. Optional striking plate (Ref. 6 59) available. ylinders Scandinavian Oval SS 5-Pin SS lexcore SS SS Twin ombi SS Twin 7 SS LIQ an be incorporated into an SS master key system Key can only be removed in locked position. rass or finishes see page :6. hand and door thickness. î 6 nightlatch Keyholders operate the lock to gain entry. Non-keyholders gain exit by depressing the handle. vailable with mm backset only. Latchbolt automatically deadlocked. andle retracts Key retracts (-) (/) () (-G) (-) (-) (-) Product has been successfully typetested for conformity to S EN 9. Regular audit testing is undertaken. Dimensions on page :6 Reference: :7-7 :

16 Special purpose locks Small case locks pplication Small case locks for easier site fixing with hand tools. ylinders Scandinavian Oval or Round SS 5-Pin SS lexcore SS SS Twin ombi SS Twin 7 SS LIQ an be incorporated into an SS master key system vailable with single cylinder and thumbturn, or alternatively with double cylinders or single cylinder only. Supplied as standard with striking plate. ylinder and accessories bolt through lockcase for added strength. or finishes see page :6. door thickness. î 7 high security deadlock Suitable as a supplementary lock for use in entrance doors, swing doors, or gates where no handle is required. ardened steel deadbolt is thrown mm by 6 turn of key or thumbturn. Key can removed in locked or unlocked position. vailable with 5mm backset only. Key operates Turn operates.5.5 î 75 nightlatch with key lock-back Latchbolt automatically deadlocked. Key retracts Turn retracts Latchbolt held back by key in faceplate Suitable for self closing doors with door pulls. rass bolt deadlocks automatically when door is closed. Key for locking bolt into lockcase. hand. Key can removed in locked or unlocked position. vailable with 5mm backset only. Reference: : - 7 :

17 Special purpose locks Small case toilet lock pplication Locks for bathroom and toilet doors in schools, hospitals, sheltered housing, factories, hotels etc. Small case locks are suitable for easier site fixing with hand tools. an be opened in an emergency by screwdriver from outside. Incorporates red/white indicator on both sides. or finishes see page :6. hand and door thickness. î T toilet latch 5 Toilet lock made up from mortice locking latch and 6 accessory set. Latchbolt of brass, reversible without opening lockcase. Lockcase is supplied with striking plate. lso usable with lever key. Door handles non-operable when latch is locked. vailable with 5mm backset only. Indicator rose with emergency device.* * lternatively: key deadlocks Turn (or key) deadlocks Reference: :9-7 :

18 Special purpose locks Lever lock pplication Locks for lightweight inner doors. Supplied as standard with striking plate. ccessories bolt through lockcase for added strength. Key can be removed in locked or unlocked position. or finishes see page :6. hand and door thickness. î lever lock Upright mortice lock with levers and 6 combinations. Key operation from both sides. Deadbolt thrown mm by 6 turn of key. rass Key can be removed in locked or unlocked position. Supplied with two keys. Key operates Key operates Reference: :5-7 :

19 Special purpose locks SS cabinet locks pplication ylinder locks for light cupboard doors and drawers. Supplied with specially shaped cylinder. omes complete with striking plate. or finishes see page :6. hand and door thickness. ylinders Special cylinder SS 5-Pin an be incorporated into an SS master key system î 67. cabinet deadlock ylinder cut cabinet or drawer deadlock. Key can be removed in locked or unlocked position. Lockcase and cylinder of solid brass. and can be changed as required. î 67. cabinet deadlock ylinder rim fixing cabinet or drawer deadlock. Key can be removed in locked or unlocked position. Lockcase and cylinder of solid brass. and can be changed as required. î 67. cabinet sliding door lock ylinder rim fixing sliding door cabinet or drawer lock. Key can be removed in locked or unlocked position. Lockcase and cylinder of solid brass. and can be changed as required. * Maximum door thickness * Maximum door thickness * Maximum door thickness Reference: :5-7 :

20 Special purpose locks upboard locks pplication ylinder locks for wooden or steel doors. or use with door thicknesses as shown. Used with Scandinavian Oval shaped rim cylinder and sleeve. No other options available. or finishes see page :6. hand and door thickness. ylinders Scandinavian Oval Rim SS 5-Pin SS lexcore SS SS Twin ombi SS Twin 7 SS LIQ an be incorporated into an SS master key system î 79 cupboard lock ylinder rim fixing cupboard lock. Key can only be removed when door is locked. Lockcase of zinc plated steel. Suitable for door thicknesses up to 6mm using distance ring as required, see table below. î 79 cupboard deadlock ylinder rim fixing cupboard lock. Key can be removed in locked or unlocked position. Lockcase of zinc plated steel. Suitable for door thicknesses up to 6mm using distance ring as required, see table below. () Door thickness Distance ring Distance ring ref. -6mm -mm mm mm mm 77 () Door thickness Distance ring Distance ring ref. -6mm -mm mm mm mm 77 î 796 drug cupboard lock ylinder rim security night latch. utomatic deadlocking when door is closed. Supplied with striking plate. Key can only be removed in locked position. Lockcase of bright chrome plated steel. Door thickness Distance ring Distance ring ref. 7-7mm -7mm 5mm mm mm mm 5mm mm mm 77-7mm 5mm 6 6 or 5-pin cylinders subtract 5mm from the size of distance ring required. 5-pin cylinders (R57, 57): = mm Other cylinders: = mm Reference: :5-7 :

21 Special purpose locks ylinder rim locks pplication Rim Night Latch and Rim Deadlock for doors which cannot be fitted with mortice locks. ylinders Scandinavian Oval Rim SS 5-Pin SS lexcore SS SS Twin ombi SS Twin 7 SS LIQ an be incorporated into an SS master key system Used with Scandinavian Oval shaped rim cylinder and sleeve. Optional zinc plated striking plate for use with outward opening doors. Lock illustrated is to suit outward opening. Minimum door thickness 5mm with SS 5-Pin and lexcore cylinders, mm with other SS cylinders. ylinder distance rings may be used on thinner doors. or finishes see page :6. inward or outward opening and door thickness. î 776 cylinder rim nightlatch ylinder Rim Nightlatch with automatic deadlocking as the door closes. Simple lock-back facility by depressing latchbolt into lockcase. rass latchbolt released by turning thumbturn. Key retracts Latchbolt automatically deadlocked. Thumbturn î 777 cylinder rim deadlock ylinder Rim Deadlock. Extra long deadbolt thrown mm by turn of key or thumbturn. Key operates Thumbturn operates Reference: :5-7 :

22 Special purpose locks Three point mortice locking pplication Suitable where free passage is required at certain times, but security is needed the rest of the time. Minimises the hardware visible on the surface of the door. Ideal for both commercial and domestic applications. ylinders Scandinavian Oval or Round SS 5-Pin SS lexcore SS SS Twin ombi SS Twin 7 SS LIQ an be incorporated into an SS master key system Multipoint mortice locks with spring latchbolt, deadbolt and two hookbolts. Supplied with receivers for top and bottom hookbolts. ylinder, cylinder accessories 56/56, unsprung or double sprung lever handles and security strike for centre deadbolt supplied separately. also requires backplates and thumbturn. Standard finish yellow chromate. When ordering please specify hand. î 5 three point sash lock 5 entral deadbolt has mm bolt throw; hookbolts have 5mm throw. olts are hardened steel. When unlocked, the door is held in place by the latchbolt, which is operated by depressing the lever handles. Raising the handles throws the two hookbolts; operating the key through 6º deadlocks these into position and throws a central vailable with 5mm backset. Key operates deadbolt and hookbolts. Lever handle retracts Raising lever throws hookbolts. Key deadlocks hookbolts and operates central î three point special sash lock 5 entral deadbolt has mm bolt throw; hookbolts have 5mm throw. olts are hardened steel. thumbturn can be used to lock and unlock the door when the area is occupied, without a key being required. Deactivating the thumbturn when the building is left empty means that only authorised keyholders can then unlock the door. Latchbolt is operated by depressing the lever handles. Raising the handles throws the two hookbolts; operating the key or thumbturn deadlocks these into position and throws a central The thumbturn can be deactivated by a faceplate snib, so the door can only be unlocked by key. vailable with 5mm backset. Key operates deadbolt and hookbolts. Unlocking with key re-activates thumbturn. Turn only operates deadbolt if faceplate snib is not activated. Lever handle Raising lever throws hookbolts.key deadlocks hookbolts and operates central Reference: :5-7 :

23 Special purpose locks Security gate lock pplication igh security gate lock which operates two vertical locking shoots via lever handle; bolts are then locked in position by key. Suitable for single and double leaf security gates. ylinders Scandinavian Oval SS 5-Pin SS lexcore SS SS Twin ombi SS Twin 7 SS LIQ an be incorporated into an SS master key system Lock assembly cassette can be screw fixed or welded onto the active or passive leaf/frame. Requires cylinder (single or double), cylinder accessories, 7 lever handle and mm square spindle, all supplied separately. vailable in hot galvanised or ungalvanised steel finishes. î 5 gate lock igh security gate lock. Two stainless steel mm diameter bolts with bolt throw 5mm Lever andle or use with 5 gate lock. Supplied singly. Metallic grey finish Reference: :55-7 :

24 Special purpose locks locking locks pplication Special lock with cylinder for blocking switches and fuse boxes to prevent switching on while repairs are being made thereby preventing accidents. This lock can be carried by authorised staff or placed where required. ylinders Scandinavian Oval SS 5-Pin SS lexcore SS SS Twin ombi SS Twin 7 SS LIQ an be incorporated into an SS master key system Lock claws of bright zinc plated steel. ylinder is satin chrome plated. Supplied as standard with two keys. î locking lock One claw used to block the switch. The other claw has six barring holes which enable other operatives to block the lock with their own individual blocking lock or padlock. Ref. ylinder type Dimension R5 SS 5-pin 5.5mm 5 SS lexcore 5.5mm SS mm 5 SS Twin ombi 5 mm 76 SS 7 mm SS LIQ mm Reference: :56-7 :

25 ccessories ccessories Product Reference Description or use with Product Reference Description or use with 5 Rim cover case converts mortice lock to rim fixing Evolution & Modular locks 5mm backset Security striking plate Deadlocks 765 Drill resistant cover Evolution & Modular locks 5mm backset 5 56 Security striking plate Modular locks 7 Drill resistant cover Small case locks 6 97 Security striking plate 77, 57 and 977 hookbolt locks 7 lternative striking plate mm wide Modular locks 66 Striking plate S/NSI Modular locks 5 57 Standard striking plate mm wide Modular locks ontact stockist for details aceplates S/NSI Modular locks 6 95 lternative striking plate mm wide Modular locks 7 (mm) 79 (9mm) 75 (5mm) Modular rebate kits Modular locks Single swing strike (handed) 766 lockcase Double swing strike 766 lockcase 5 Standard striking plate mm wide Euro locks Reference: :57-7 :

26 ccessories ccessories Product Reference Description or use with Product Reference Description or use with ompact rebate kit mm ompact nightlatches with round faceplate ompact rebate kit mm ompact locks (except nightlatches) with round faceplate 9 ompact rebate kit 9mm ompact nightlatches with round faceplate 9 ompact rebate kit 9mm ompact locks (except nightlatches) with round faceplate 5 ompact rebate kit 5mm ompact nightlatches with round faceplate 5 ompact rebate kit 5mm ompact locks (except nightlatches) with round faceplate nti-drill plates for Euro profile cylinders ompact 57mm backset locks (except ) nti-drill plates for Oval profile cylinders ompact 57mm backset locks (except ) (mm) 9 (9mm) 5 (5mm) Evolution rebate kits Evolution locks (5mm) 6 5 (5mm) Lock shield anti-drill plates Evolution locks with Scandinavian Oval cylinders (7mm) Standard striking plate 6mm wide Evolution locks igh security striking plate mm wide Evolution locks Reference: :5-7 :

27 Information for specifiers Door handing simple rule how to decide whether the door is left hand or right hand Stand in front of the closed door on the side where you can see the hinges. If the hinges are to the right, it is a right hand door if you see them to the left it is a left hand door. Note that the handing of the door is always decided from the position of the hinge knuckles. Left hand inward opening Right hand outward opening Right hand inward opening Left hand outward opening When specifying split follower locks the direction of door opening must also be stated. Lock type: left hand follower Left hand door outward opening Right hand door inward opening OUTSIDE INSIDE Right hand door outward opening Left hand door inward opening Lock type: right hand follower ow to order complete SS lock is made up from a number of different components. Thanks to the innovative modular nature of our product range, the specifier has a high degree of flexibility when assembling a lock package, because many items are interchangeable. This guide shows how to draw up an order for a complete lock. Lockset Type ackset and of Lock Opening of Door ylinder Type ccessory Type Lever andle Type Optional Items inish Door Thickness See product pages Select from options available See door handing above See door handing above Refer to ylinder & Key Systems section Refer to Door urniture section Refer to Door urniture section If required see pages :57- and/or Door urniture section See finishes on page :6 Please state door thickness Example: Example: Example: Example: Example: Example: Example: Example: Example: Example: 7mm L Inward mm Most SS lock ranges offer a choice of backset; eg Evolution (5/5/7) Modular (5/7), and Euro (55/6). SS locks feature latchbolts which can be easily reversed on site, allowing the lock to be fitted to either hand of door. The direction of door opening and door handing is critical information when specifying Split ollower locks. Evolution and Modular locks use Scandinavian Oval or Round cylinders; ompact locks use UK Oval or Euro profile; Euro locks use Euro profile only. complete Evolution or Modular lock (5 or 7mm backset only) will normally include a 56 accessory set (cylinder ring & thumbturn) unless otherwise stated. s and optional items such as decorative plates may be specified if desired. urthermore, SS locks are compatible with many other makes of quality door furniture. This information allows the stockist to determine the correct sizes of various components. Reference: :59-7 :

28 Reference: : :6 Standards Information for specifiers Names of lock components vary regionally and from one manufacturer to another. To ensure clarity in specifying SS locks the terminology shown below should be used as applicable. ylinder ring (outside) ylinder (outside) Extension piece (for thicker doors) Turn screw Turn follower ylinder screw Thumbturn ylinder (inside) ylinder screw ylinder ring (inside) Key Turn screw andle follower Latchbolt Deadbolt aceplate Terminology & assembly S EN 9 classifies lockcases under the categories shown. ertain locks also comply with S EN 79 when used with appropriate accessories.. ategory of use Durability Door mass ire resistance Safety orrosion resistance Security Door application Key operation Spindle operation Key identification (-) (/) () (-G) (-) (-) (-) 5 (-) (/) () (-G) (-) (-) (-) 6 (-) (/) () (-G) (-) (-) (-) 77 (-) (/) () (-G) (-) (-) (-) 7 (-) (/) () (-G) (-) (-) (-) 55 (-) (/) () (-G) (-) (-) (-) 5 (-) (/) () (-G) G (-) (-) (-) 5 (-) (/) () (-G) (-) (-) (-) 7 (-) (/) () (-G) (-) (-) (-) 75 (-) (/) () (-G) (-) (-) (-) 76 (-) (/) () (-G) (-) (-) (-) 7 (-) (/) () (-G) (-) (-) (-) 79 (-) (/) () (-G) (-) (-) (-) 5 (-) (/) () (-G) (-) (-) (-) 6 (-) (/) () (-G) (-) (-) (-) 77 (-) (/) () (-G) (-) (-) (-) 7 (-) (/) () (-G) (-) (-) (-) 55 (-) (/) () (-G) (-) (-) (-) 5 (-) (/) () (-G) G (-) (-) (-) 5 (-) (/) () (-G) (-) (-) (-) 7 (-) (/) () (-G) (-) (-) (-) 75 (-) (/) () (-G) (-) (-) (-) 76 (-) (/) () (-G) (-) (-) (-) 7 (-) (/) () (-G) (-) (-) (-) 79 (-) (/) () (-G) (-) (-) (-) 5 (-) (/) () (-G) (-) (-) (-) 6 (-) (/) () (-G) (-) (-) (-) 77 (-) (/) () (-G) (-) (-) (-) 7 (-) (/) () (-G) (-) (-) (-) 55 (-) (/) () (-G) (-) (-) (-) 5 (-) (/) () (-G) G (-) (-) (-) 5 (-) (/) () (-G) (-) (-) (-) 7 (-) (/) () (-G) (-) (-) (-) 75 (-) (/) () (-G) (-) (-) (-) 76 (-) (/) () (-G) (-) (-) (-) 7 (-) (/) () (-G) (-) (-) (-) 79 (-) (/) () (-G) (-) (-) (-) 5 (-) (/) () (-G) (-) (-) (-) 6 (-) (/) () (-G) (-) (-) (-) 77 (-) (/) () (-G) (-) (-) (-) 7 (-) (/) () (-G) (-) (-) (-) 55 (-) (/) () (-G) (-) (-) (-) 5 (-) (/) () (-G) G (-) (-) (-) 5 (-) (/) () (-G) (-) (-) (-) 7 (-) (/) () (-G) (-) (-) (-) 75 (-) (/) () (-G) (-) (-) (-) 76 (-) (/) () (-G) (-) (-) (-) 7 (-) (/) () (-G) (-) (-) (-) 79 (-) (/) () (-G) (-) (-) (-) 5 (-) (/) () (-G) (-) (-) (-) 6 (-) (/) () (-G) (-) (-) (-) 77 (-) (/) () (-G) (-) (-) (-) 7 (-) (/) () (-G) (-) (-) (-) 55 (-) (/) () (-G) (-) (-) (-) 5 (-) (/) () (-G) G (-) (-) (-) 5 (-) (/) () (-G) (-) (-) (-) 7 (-) (/) () (-G) (-) (-) (-) 75 (-) (/) () (-G) (-) (-) (-) 76 (-) (/) () (-G) (-) (-) (-) 7 (-) (/) () (-G) (-) (-) (-) 79 (-) (/) () (-G) (-) (-) (-) 5 (-) (/) () (-G) (-) (-) (-) 6 (-) (/) () (-G) (-) (-) (-) 77 (-) (/) () (-G) (-) (-) (-) 7 (-) (/) () (-G) (-) (-) (-) 55 (-) (/) () (-G) (-) (-) (-) 5 (-) (/) () (-G) G (-) (-) (-) 5 (-) (/) () (-G) (-) (-) (-) 7 (-) (/) () (-G) (-) (-) (-) 75 (-) (/) () (-G) (-) (-) (-) 76 (-) (/) () (-G) (-) (-) (-) 7 (-) (/) () (-G) (-) (-) (-) 79 (-) (/) () (-G) (-) (-) (-) 5 (-) (/) () (-G) (-) (-) (-) 6 (-) (/) () (-G) (-) (-) (-) 77 (-) (/) () (-G) (-) (-) (-) 7 (-) (/) () (-G) (-) (-) (-) 55 (-) (/) () (-G) (-) (-) (-) 5 (-) (/) () (-G) G (-) (-) (-) 5 (-) (/) () (-G) (-) (-) (-) 7 (-) (/) () (-G) (-) (-) (-) 75 (-) (/) () (-G) (-) (-) (-) 76 (-) (/) () (-G) (-) (-) (-) 7 (-) (/) () (-G) (-) (-) (-) 79 (-) (/) () (-G) (-) (-) (-) 5 (-) (/) () (-G) (-) (-) (-) 6 (-) (/) () (-G) (-) (-) (-) 77 (-) (/) () (-G) (-) (-) (-) 7 (-) (/) () (-G) (-) (-) (-) 55 (-) (/) () (-G) (-) (-) (-) 5 (-) (/) () (-G) G (-) (-) (-) 5 (-) (/) () (-G) (-) (-) (-) 7 (-) (/) () (-G) (-) (-) (-) 75 (-) (/) () (-G) (-) (-) (-) 76 (-) (/) () (-G) (-) (-) (-) 7 (-) (/) () (-G) (-) (-) (-) 79 (-) (/) () (-G) (-) (-) (-) 5 (-) (/) () (-G) (-) (-) (-) 6 (-) (/) () (-G) (-) (-) (-) 77 (-) (/) () (-G) (-) (-) (-) 7 (-) (/) () (-G) (-) (-) (-) 55 (-) (/) () (-G) (-) (-) (-) 5 (-) (/) () (-G) G (-) (-) (-) 5 (-) (/) () (-G) (-) (-) (-) 7 (-) (/) () (-G) (-) (-) (-) 75 (-) (/) () (-G) (-) (-) (-) 76 (-) (/) () (-G) (-) (-) (-) 7 (-) (/) () (-G) (-) (-) (-) 79 (-) (/) () (-G) (-) (-) (-) 5 (-) (/) () (-G) (-) (-) (-) 6 (-) (/) () (-G) (-) (-) (-) 77 (-) (/) () (-G) (-) (-) (-) 7 (-) (/) () (-G) (-) (-) (-) 55 (-) (/) () (-G) (-) (-) (-) 5 (-) (/) () (-G) G (-) (-) (-) 5 (-) (/) () (-G) (-) (-) (-) 7 (-) (/) () (-G) (-) (-) (-) 75 (-) (/) () (-G) (-) (-) (-) 76 (-) (/) () (-G) (-) (-) (-) 7 (-) (/) () (-G) (-) (-) (-) 79 (Note: graphic icons are copyright by the ssociation of ritish ardware Manufacturers: Information for specifiers

29 Information for specifiers inishes In the increasingly polluted atmosphere in which we live, the demands on products to resist corrosion are particularly high. SS products have the benefit of the latest automatic plating equipment which incorporates the best of modern plating processes. In addition our products are suitable for replating, on occasions when it is important to match the finish of other ironmongery on a project. Except when stated as appropriate, all lockcases and components are manufactured from zinc plated steel. This offers excellent strength and corrosion resistance. vailable from stock vailable ex-works ontact your stockist for up-to-date information. Evolution locks Modular locks D5 Euro locks ompact locks Small case locks Narrow profile locks abinet locks upboard locks Rim locks T toilet lock lever lock Item right nickel in Polished chrome in Satin chrome in Polished brass in Satin s/ steel in Polished s/steel in S/steel effect in right zinc in 57 Lockset Yellow zinc/iron in 6 lack lacquer in 66 ccessories* ylinder Lockset ccessories ylinder Lockset ccessories ylinder Lockset luminium in ccessories ylinder Lockset ccessories ylinder Lockset ccessories ylinder Lockset ylinder Lockset ylinder Lockset ylinder Lockset ylinder Lockset ylinder * Evolution locks with 5mm backset use special narrow profile accessories available in finish only. Reference: :6-7 :

30 Information for specifiers Door preparation SS Evolution, Modular and ompact locks are supplied with a full size template and fixing instructions. We recommend factory fixing of all locks ensuring accuracy in door preparation. Where this is not possible care should be taken to allow sufficient clearance for the lockcase into its mortice. î Evolution 5mm backset î Evolution 5mm backset î Evolution 7mm backset R5 * * * * î Modular 5mm backset î Modular 7mm backset î D5 Euro 6mm backset rd sq * * *mm diameter for surface fixing handles (or follow manufacturer s instructions). mm diameter for SS bolt through handles Thumbturn hole on, 769 locks: drill mm dia. hole on one side of door only. entre of this hole is 6mm below centre of upper (cylinder) hole on diagram above. * * î ompact 57mm backset * î Narrow Profile mm backset R5 5 R ** L 7 7 Reference: :6-7 :

31 Information for specifiers Lockcase dimensions î Evolution 5mm backset î Evolution 5mm backset î Evolution 7mm backset to c/c to c/c î Modular 5mm backset î Modular 7mm backset î D5 Euro 6mm backset rd sq to c/c to c/c î ompact 57mm backset î Narrow Profile mm backset to c/c Oval 9. Euro Reference: :6-7 :

32 Information for specifiers Dimensions & positions of bolts î Modular SS LOK DEDLOK LT DEDLOKING NIGTLT DOULE NIGTLT 765, 5765, 9565T, 765, 565T, 7, 97 9, 59 57, 675, 75, 76, 76, 76, 76, (67, 759) 76, 76, 76, 5/, 5/9 î Evolution î ompact SS LOK SS LOK ESPE SS LOK & TROOM LOK ESPE DEDLOK DEDLOKING NIGTLT î D5 Euro SS LOK î Narrow profile DEDLOKING NIGTLT OOKOLT LOK , 6 77 Reference: :6-7 :