3.1 Introduction to the First Law of Thermodynamics. 3.2 Heat Transfer

Size: px
Start display at page:

Download "3.1 Introduction to the First Law of Thermodynamics. 3.2 Heat Transfer"

Transcription

1 3.1 Introduction to the First Law of Thermodynamics Simply stated, the First Law of Thermodynamics is a conservation of energy principle. In a thermodynamic sense, the energy gained by a system is exactly equal to the energy lost by the surroundings (look at figure below)... system T=400 K HEAT surroundings, T=90 K Energy can cross the boundary in a closed system in the form of heat and/or work. These energy forms are different, making it important to be able to distinguish between them. 3. Heat Transfer Heat is defined as the form of energy that is transferred between two systems (or a system and its surroundings) by virtue of a temperature difference. That is, an energy interaction is heat if and only if it occurs because of a temperature difference. Heat is energy in transition. It is only recognized as it crosses the boundary of a system. A process during which there is no heat transfer is called an adiabatic process. There are two ways a process can be adiabatic: either the system is well-insulated so that no heat flows across the boundary, or the system and surroundings are both at the same temperature (zero temperature difference). Heat transfer per unit mass, q, of a system is defined as: (3..1) The total heat transferred to/from a pure substance between states 1 and can be expressed in terms of the heat transfer rate as: (3..) where Q. is the heat transfer rate per unit time. For constant Q., the equation above becomes... Q = Q. t (3..3)

2 Very Important Sign Convention: Since heat is a directional quantity (it can be lost or gained), it is very important to establish a sign convention! Heat transfer to a system is positive and heat transfer from a system is negative! Heat In SYSTEM Heat out Q=5 kj Q=-5 kj Heat can be transferred in three different ways: conduction, convection, and radiation. Below is a brief description to familiarize you with the basic mechanisms of heat transfer. Conduction Heat Transfer: The transfer of energy from the more energetic particles of a substance to the adjacent less energetic ones as a result of interactions between the particles. Conduction takes place in solids, liquids, and gases. The rate of heat conduction, Q. cond, is given by Fourier's Law of heat conduction: (3..4) where k is a constant of proportionality called the thermal conductivity and A is the area normal to the direction of heat transfer. Fourier's law indicates that the rate of heat conduction in a direction is proportional to the temperature gradient in that direction. Note! Have you ever wondered why sitting in a cold steel chair feels colder than sitting in a wooden chair at the same temperature? The cold sensation you feel when sitting in the chair is due to heat being conducted from your body to the chair. The thermal conductivities of carbon steel and wood are, respectively, 60.5 and 0.17 W/(m K). This means you lose 350 times more heat from your body by sitting in the steel chair as opposed to the wooden chair, initially!! Convection Heat Transfer: The mode of energy transfer between a solid surface and an adjacent liquid or gas which is in motion, and it involves the combined effects of conduction and fluid motion. The faster the fluid motion, the greater the convection. In the absence of bulk fluid motion, the heat transfer between the solid and fluid occur via conduction. There are two specific kinds of convection: v Forced convection: occurs when the fluid is forced to flow over a surface by external means such as a fan, blower, or the wind. v Free (or natural) convection: occurs if fluid motion is caused by buoyancy forces induced by density differences due to the variation of temperature in the fluid. This is how a baseboard heater works. Heat transfer processes involving change of phase of a fluid are considered convection processes (including boiling and condensation).

3 The rate of heat transfer by convection, Q. conv, is determined from Newton's Law of Cooling, which is expressed as: Q. conv = ha(t s T f ) (3..5) where h is the convection heat transfer coefficient, A is the surface area through which heat transfer takes place, T s is the surface temperature, and T f is the bulk fluid temperature away from the surface. Radiation Heat Transfer: The energy emitted by matter in the form of electromagnetic waves (or photons) as a result of the changes in the electronic configurations of the atoms or molecules. Unlike conduction and convection, the transfer of energy by radiation requires no intervening medium. In heat transfer, we're interested in thermal radiation, or radiation emitted by bodies because of their temperature. Thermal radiation is a volumetric phenomenon, and all solids, liquids, and gases, emit, absorb, and transmit thermal radiation to varying degrees. For opaque solids, thermal radiation is a surface phenomenon and their maximum emission of radiant energy is given by the Stefan-Boltzmann law: Q. emit,max = AT s 4 (3..6) where A is the surface area and σ = 5.67 x 10-8 W/(m K 4 ) is the Stefan-Boltzmann constant. The idealized surface which emits radiation at this maximum rate is called a blackbody. The radiation of real surfaces is less than radiation emitted by a blackbody at the same temperature and is expressed as: Q. emit = AT s 4 (3..7) where ε is the emissivity of the surface. The property emissivity, whose value is in the range 0 1is a measure of how closely a surface approximates a blackbody for which ε = 1. Another important property of a surface is called the absorptivity, α, which is the fraction of radiant energy incident on a surface which is absorbed by the surface. A blackbody absorbs all incident radiation (α=1). In general, both ε and α depend on temperature and wavelength of radiation. Kirchoff's law of radiation states that the emissivity and absorptivity of a surface are equal at the same temperature and wavelength. In most practical applications, the temperature and wavelength dependencies of surface emissivity and absorptivity is ignored and the average emissivity is taken as the average absorptivity. In general, the determination of the net rate of heat transfer by radiation is a very complicated matter since it depends on the properties of the surfaces, the orientation relative to each other, and the intervening medium. However, the following simple equation is used to get a ballpark figure as to the net radiative transfer between a system and its surroundings: Q. rad,net = A T 4 4 s T surr (3..8) where T s is the surface temperature and T surr is the temperature of the surroundings. All temperatures used in radiation calculations must be absolute! Note! In the winter, people in a room with the curtains open may experience a faint chilly feeling. The window glass separating the people in the room and the cold surroundings outside is semi-transparent. That is, the windows can partially transmit thermal radiation. This causes people in the room to radiate to the surroundings, producing that uncomfortable feeling! (Drawing the curtains should alleviate this problem).

4 3.3 Work Work, like heat is an energy interaction between a system and its surroundings. More specifically, work is the energy transfer associated with a force acting through a distance( e.g. rotating shaft, rising piston, etc...). The work done per unit mass, w, of a system is defined as: The work done per unit time is called power and is denoted by Ẇ. Very Important Sign Convention: (3.3.1) The sign convention used by your text asserts work done by a system as being positive and work done on a system as being negative. (+) Work done by system SYSTEM (-) Work done on system Heat transfer and work are interactions between a system and its surroundings, and there are many similarities between the two: Both are recognized at the boundaries of the system as they cross them. That is, both heat transfer and work are boundary phenomena. Systems possess energy, but not heat transfer or work. That is, heat transfer and work are transient phenomena. Both are associated with a process, not a state. Unlike properties, heat transfer or work has no meaning at a state. Both are path functions (i.e. their magnitudes depend on the path followed during a process as well as the end states). Path functions have inexact differentials designated by the symbol δ. Therefore, a differential amount of heat or work is represented by δq or δw, respectively, instead of dq or dw. Properties (like temperature, pressure, specific volume, etc...), however, are point functions (i.e., they depend on the state only, and not on how a system reaches that state), and they have exact differentials designated by the symbol d. The work done on or by a system between two states is represented as W 1, not W! The same goes for heat.

5 Electrical Work: The flow of electrons, usually through a wire, across a system boundary forms the basis for electrical work. When N coulombs of electrons move through a potential difference V, the electrical work done is: W e = VN (3.3.) which can also be expressed in the rate form as: Ẇ e = VI (3.3.3) where Ẇ e is the electrical power and I is the electrical current (usually measured in amperes, A).. W e = VI = I R R = V /R I V In general, both V and I vary with time, and the electrical work done during a time interval t is: W e = 1 VIdt... and for constant V and I during t... W e = VI t (3.3.4) 3.4 Mechanical Forms of Work There are several ways of doing work, each in some way related to a force F acting through a distance s... W = 1 Fds... or, for a constant force F... W = Fs (3.4.1) There are two requirements for a work interaction between a system and its surroundings to exist: There must be a force acting on the boundary. The boundary must move. Some important forms of mechanical work are listed below...

6 Moving Boundary Work: One form of work frequently encountered in practice is associated with the expansion or compression of a gas in a piston-cylinder device. During this process, part of the boundary (the inner face of the piston) moves back and forth (as in an automobile engine). Therefore, the expansion and compression work is often called the moving boundary work, or boundary work. F ds P The boundary work between two states is the area under the P-V diagram, or... W b = 1 PdV (3.4.)... or, for an isobaric process in a piston-cylinder device... W b = P V (3.4.3) Polytropic Process: During expansion and compression processes of real gases, pressure and volume are often related by PV n = C, where n and C are constants. A process of this kind is a polytropic process. From Eq. (3.4.), the boundary work is and for ideal gases (PV=mRT), this equation can also be written as: Question to think about! (3.4.5) (3.4.4) In the boundary work expressions given above (Eqs. (3.4.4) and (3.4.5)), what happens to the boundary work when the constant n is equal to 1?

7 Gravitational Work: Gravitational work can be defined as the work done by or against a gravitational force field. The work required to raise a body from level z 1 to level z is: (3.4.6) This expression is the change in potential energy! Gravitational work is positive if it is done by the system (as the system falls) and negative if done on the system (as the system is raised). Accelerational Work: The work associated with the change in velocity of a system is called accelerational work. By combining Newton's second law (F=ma) and Eq. (3.4.1), the following accelerational work expression is obtained: (3.4.7) This expression is recognized as being the change in kinetic energy of mass m! As always, this form of work is positive if done by the system and negative if done on the system. Shaft Work: Energy transmission via a rotating shaft is known as shaft work. The shaft work generated by applying a constant torque τ for n revolutions of the shaft is given by: W sh = n (3.4.8)... and the power transmitted through the shaft is: Ẇ sh = ṅ (3.4.9) where ṅ is the number of revolution per unit time. Spring Work: The work performed when displacing a spring from its equilibrium position is known as spring work. The spring work is obtained by combining Hooke's Law (F=kx) and Eq. (3.4.1) giving the following expression for a linear (k is constant) elastic spring... W spring = 1 k x x 1 (3.4.10) where x 1 and x are initial and final displacements of the spring measured relative to its equilibrium position.

8 3.5 The First Law of Thermodynamics The first law of thermodynamics, a simple re-statement of the conservation of energy principle for a closed system or control mass, may be expressed as follows: Q W = E Net energy transfer Net increase (or to (or from) the system decrease in the total as heat and work energy of the system (3.5.1) where: Q = net heat transfer across system boundaries Q = Q in Q out W = net work done in all forms ( W = W out W in ) E = net change in total energy of system ( E = E E 1 ) As discussed previously, the total energy of a system is considered to be comprised of three parts: internal energy U, kinetic energy KE, and potential energy PE. The change in total energy E is: E = U + KE + PE (3.5.) where: U = m(u u 1 ) For stationary closed systems, the changes in kinetic and potential energies are negligible, and the first-law relation reduces to: Other Forms of the First-Law Relation: Q W = U (3.5.3)... on a unit-mass basis: q w = e (3.5.4)... on a time rate basis: (3.5.5)... in differential forms: Q W = de (3.5.6) q w = de (3.5.7) For a cyclic process, the initial and final states are identical ( E=0). Therefore, Q W = 0 Q = W (3.5.8)

9 3.7 Specific Heats The specific heat is defined as the energy required to raise the temperature of a unit mass of a substance by one degree. In general, this energy depends on how the process is executed. In thermodynamics, we are interested in two kinds of specific heats: specific heat at constant volume C v : the energy required to raise the temperature of a unit mass of a substance by one degree as the volume is maintained constant. V = constant 3.13 kj m = 1 kg T = 1 K C v = 3.13 kj/(kg K) specific heat at constant pressure C p : the energy required to raise the temperature of a unit mass of a substance by one degree as the pressure is maintained constant. P = constant m = 1 kg T = 1 K C p = 5. kj/(kg k) Important Point! 5. kj The value of C p will always be greater than C v for a pure substance because the constant pressure system is allowed to expand. Extra energy must be supplied to the system to account for the expansion (boundary) work. Consider the differential form of the first-law (on a per-mass basis)... q w other w b = de (3.7.1)

10 For a constant volume process (δw b =0) with no work interactions, the following must be true... q = C v dt = du... or... C v = u T (3.7.) v For a constant pressure process (δw b =Pdv) with no work interactions, we have... q = C p dt = du + Pdv = dh... or... C p = h T (3.7.3) p Note that C v is the change in specific internal energy u per unit change in temperature at constant volume and C p is the change in specific enthalpy h per unit change in temperature at constant pressure. Generally, specific heats vary with temperature. That is to say, the amount of energy it takes to raise the temperature of a unit mass of a pure substance by degree (for constant volume & pressure processes) varies at different body temperatures. However, this difference is usually not very large. Specific heat are sometimes given on a molar basis, and are denoted by C v and C p. Specific heats are properties of pure substances and their values can be found in engineering tables. 3.8 Internal Energy, Enthalpy, and Specific Heats of Ideal Gases It has been demonstrated experimentally (and proven theoretically) that the internal energy and enthalpy of an ideal gas is a function of its temperature only. Thus for ideal gases, the partial derivatives in Eqs. (3.7.) and (3.7.3) can be replaced with ordinary derivatives and we get: du = C v (T)dT u = u u 1 = dh = C p (T)dT h = h h 1 = 1 1 C v (T)dT C p (T)dT (3.7.4) (3.7.5) To carry out these integrations, we need to have relations for C v and C p as a function of temperature. At low pressures, all real gases approach ideal-gas behavior, and therefore their specific heats depend on temperature only. The specific heats of real gases at low pressures are called ideal-gas specific heats, or zero-pressure specific heats, and are often denoted C v0 and C p0. These zero-pressure specific heat data are available in the Appendix of your text as a function of temperature and can be used for real gases as long as they don't deviate from ideal-gas behavior significantly (check the compressibility factor! ). Another way of evaluating the change in specific internal energy/enthalpy is to refer to tabulated data. Tables A17-A0 in the Appendix contain molar internal energy/enthalpy data for air, O, N, CO, H, and H O. And yet another way involves finding an average zero-pressure specific heat value (look at Table A-b in the Appendix) for an average temperature of (T 1 + T )/. Specific internal energies/enthalpies are then computed using the following formulas: u u 1 = C v0,av (T T 1 ) h h 1 = C p0,av (T T 1 ) (3.7.6) (3.7.7)

11 Specific-Heat Relations of Ideal Gases: For ideal gases, the following relationships hold: C p = C v + R... and... C p = C v + R u (3.7.8) where R and R u are the gas constant and universal gas constant, respectively. The specific heat ratio k is defined as... (3.7.9) 3.9 Internal Energy, Enthalpy, and Specific Heats of Solids and Liquids A substance whose specific volume (or density) is constant is called an incompressible substance. The specific volumes of solids and liquids essentially remain constant during a process and are usually regarded as being incompressible (e.g. hydraulics). It can be mathematically shown that the constant-volume and constant-pressure specific heats for incompressible substances are identical. Therefore, C p = C v = C (3.9.1) and the change in specific internal energy u of an incompressible substance is: du = C(T)dT u = u u 1 = 1 C(T)dT C av (T T 1 ) (3.9.) The enthalpy change of incompressible substances (solids or liquids) during a process can be determined from the definition of enthalpy (h=u+pv) to be: h h 1 = (u u 1 ) + v(p P 1 ) u u 1 (3.9.3) The last term of Eq. (3.9.3) is usually very small and can be neglected.

12

Chapter 18 Temperature, Heat, and the First Law of Thermodynamics. Problems: 8, 11, 13, 17, 21, 27, 29, 37, 39, 41, 47, 51, 57

Chapter 18 Temperature, Heat, and the First Law of Thermodynamics. Problems: 8, 11, 13, 17, 21, 27, 29, 37, 39, 41, 47, 51, 57 Chapter 18 Temperature, Heat, and the First Law of Thermodynamics Problems: 8, 11, 13, 17, 21, 27, 29, 37, 39, 41, 47, 51, 57 Thermodynamics study and application of thermal energy temperature quantity

More information

Energy Transport. Focus on heat transfer. Heat Transfer Mechanisms: Conduction Radiation Convection (mass movement of fluids)

Energy Transport. Focus on heat transfer. Heat Transfer Mechanisms: Conduction Radiation Convection (mass movement of fluids) Energy Transport Focus on heat transfer Heat Transfer Mechanisms: Conduction Radiation Convection (mass movement of fluids) Conduction Conduction heat transfer occurs only when there is physical contact

More information

Lecture 30 - Chapter 6 Thermal & Energy Systems (Examples) 1

Lecture 30 - Chapter 6 Thermal & Energy Systems (Examples) 1 Potential Energy ME 101: Thermal and Energy Systems Chapter 7 - Examples Gravitational Potential Energy U = mgδh Relative to a reference height Increase in elevation increases U Decrease in elevation decreases

More information

HEAT AND MASS TRANSFER

HEAT AND MASS TRANSFER MEL242 HEAT AND MASS TRANSFER Prabal Talukdar Associate Professor Department of Mechanical Engineering g IIT Delhi prabal@mech.iitd.ac.in MECH/IITD Course Coordinator: Dr. Prabal Talukdar Room No: III,

More information

Current Staff Course Unit/ Length. Basic Outline/ Structure. Unit Objectives/ Big Ideas. Properties of Waves A simple wave has a PH: Sound and Light

Current Staff Course Unit/ Length. Basic Outline/ Structure. Unit Objectives/ Big Ideas. Properties of Waves A simple wave has a PH: Sound and Light Current Staff Course Unit/ Length August August September September October Unit Objectives/ Big Ideas Basic Outline/ Structure PS4- Types of Waves Because light can travel through space, it cannot be

More information

FUNDAMENTALS OF ENGINEERING THERMODYNAMICS

FUNDAMENTALS OF ENGINEERING THERMODYNAMICS FUNDAMENTALS OF ENGINEERING THERMODYNAMICS System: Quantity of matter (constant mass) or region in space (constant volume) chosen for study. Closed system: Can exchange energy but not mass; mass is constant

More information

Chapter 10 Temperature and Heat

Chapter 10 Temperature and Heat Chapter 10 Temperature and Heat What are temperature and heat? Are they the same? What causes heat? What Is Temperature? How do we measure temperature? What are we actually measuring? Temperature and Its

More information

Steady Heat Conduction

Steady Heat Conduction Steady Heat Conduction In thermodynamics, we considered the amount of heat transfer as a system undergoes a process from one equilibrium state to another. hermodynamics gives no indication of how long

More information

TEACHER BACKGROUND INFORMATION THERMAL ENERGY

TEACHER BACKGROUND INFORMATION THERMAL ENERGY TEACHER BACKGROUND INFORMATION THERMAL ENERGY In general, when an object performs work on another object, it does not transfer all of its energy to that object. Some of the energy is lost as heat due to

More information

Thermodynamics AP Physics B. Multiple Choice Questions

Thermodynamics AP Physics B. Multiple Choice Questions Thermodynamics AP Physics B Name Multiple Choice Questions 1. What is the name of the following statement: When two systems are in thermal equilibrium with a third system, then they are in thermal equilibrium

More information

The First Law of Thermodynamics

The First Law of Thermodynamics The First aw of Thermodynamics Q and W are process (path)-dependent. (Q W) = E int is independent of the process. E int = E int,f E int,i = Q W (first law) Q: + heat into the system; heat lost from the

More information

Name: Class: Date: 10. Some substances, when exposed to visible light, absorb more energy as heat than other substances absorb.

Name: Class: Date: 10. Some substances, when exposed to visible light, absorb more energy as heat than other substances absorb. Name: Class: Date: ID: A PS Chapter 13 Review Modified True/False Indicate whether the statement is true or false. If false, change the identified word or phrase to make the statement true. 1. In all cooling

More information

CLASSICAL CONCEPT REVIEW 8

CLASSICAL CONCEPT REVIEW 8 CLASSICAL CONCEPT REVIEW 8 Kinetic Theory Information concerning the initial motions of each of the atoms of macroscopic systems is not accessible, nor do we have the computational capability even with

More information

Name Class Date. In the space provided, write the letter of the term or phrase that best completes each statement or best answers each question.

Name Class Date. In the space provided, write the letter of the term or phrase that best completes each statement or best answers each question. Assessment Chapter Test A Chapter: States of Matter In the space provided, write the letter of the term or phrase that best completes each statement or best answers each question. 1. The kinetic-molecular

More information

HEAT UNIT 1.1 KINETIC THEORY OF GASES. 1.1.1 Introduction. 1.1.2 Postulates of Kinetic Theory of Gases

HEAT UNIT 1.1 KINETIC THEORY OF GASES. 1.1.1 Introduction. 1.1.2 Postulates of Kinetic Theory of Gases UNIT HEAT. KINETIC THEORY OF GASES.. Introduction Molecules have a diameter of the order of Å and the distance between them in a gas is 0 Å while the interaction distance in solids is very small. R. Clausius

More information

Carbon Cable. Sergio Rubio Carles Paul Albert Monte

Carbon Cable. Sergio Rubio Carles Paul Albert Monte Carbon Cable Sergio Rubio Carles Paul Albert Monte Carbon, Copper and Manganine PhYsical PropERTieS CARBON PROPERTIES Carbon physical Properties Temperature Coefficient α -0,0005 ºC-1 Density D 2260 kg/m3

More information

THE KINETIC THEORY OF GASES

THE KINETIC THEORY OF GASES Chapter 19: THE KINETIC THEORY OF GASES 1. Evidence that a gas consists mostly of empty space is the fact that: A. the density of a gas becomes much greater when it is liquefied B. gases exert pressure

More information

Heat Transfer and Energy

Heat Transfer and Energy What is Heat? Heat Transfer and Energy Heat is Energy in Transit. Recall the First law from Thermodynamics. U = Q - W What did we mean by all the terms? What is U? What is Q? What is W? What is Heat Transfer?

More information

Physics 9e/Cutnell. correlated to the. College Board AP Physics 1 Course Objectives

Physics 9e/Cutnell. correlated to the. College Board AP Physics 1 Course Objectives Physics 9e/Cutnell correlated to the College Board AP Physics 1 Course Objectives Big Idea 1: Objects and systems have properties such as mass and charge. Systems may have internal structure. Enduring

More information

The Three Heat Transfer Modes in Reflow Soldering

The Three Heat Transfer Modes in Reflow Soldering Section 5: Reflow Oven Heat Transfer The Three Heat Transfer Modes in Reflow Soldering There are three different heating modes involved with most SMT reflow processes: conduction, convection, and infrared

More information

Energy and Energy Transformations Test Review

Energy and Energy Transformations Test Review Energy and Energy Transformations Test Review Completion: 1. Mass 13. Kinetic 2. Four 14. thermal 3. Kinetic 15. Thermal energy (heat) 4. Electromagnetic/Radiant 16. Thermal energy (heat) 5. Thermal 17.

More information

1. The Kinetic Theory of Matter states that all matter is composed of atoms and molecules that are in a constant state of constant random motion

1. The Kinetic Theory of Matter states that all matter is composed of atoms and molecules that are in a constant state of constant random motion Physical Science Period: Name: ANSWER KEY Date: Practice Test for Unit 3: Ch. 3, and some of 15 and 16: Kinetic Theory of Matter, States of matter, and and thermodynamics, and gas laws. 1. The Kinetic

More information

Indiana's Academic Standards 2010 ICP Indiana's Academic Standards 2016 ICP. map) that describe the relationship acceleration, velocity and distance.

Indiana's Academic Standards 2010 ICP Indiana's Academic Standards 2016 ICP. map) that describe the relationship acceleration, velocity and distance. .1.1 Measure the motion of objects to understand.1.1 Develop graphical, the relationships among distance, velocity and mathematical, and pictorial acceleration. Develop deeper understanding through representations

More information

Forms of Energy. Freshman Seminar

Forms of Energy. Freshman Seminar Forms of Energy Freshman Seminar Energy Energy The ability & capacity to do work Energy can take many different forms Energy can be quantified Law of Conservation of energy In any change from one form

More information

Thermochemistry. r2 d:\files\courses\1110-20\99heat&thermorans.doc. Ron Robertson

Thermochemistry. r2 d:\files\courses\1110-20\99heat&thermorans.doc. Ron Robertson Thermochemistry r2 d:\files\courses\1110-20\99heat&thermorans.doc Ron Robertson I. What is Energy? A. Energy is a property of matter that allows work to be done B. Potential and Kinetic Potential energy

More information

39th International Physics Olympiad - Hanoi - Vietnam - 2008. Theoretical Problem No. 3

39th International Physics Olympiad - Hanoi - Vietnam - 2008. Theoretical Problem No. 3 CHANGE OF AIR TEMPERATURE WITH ALTITUDE, ATMOSPHERIC STABILITY AND AIR POLLUTION Vertical motion of air governs many atmospheric processes, such as the formation of clouds and precipitation and the dispersal

More information

Principle of Thermal Imaging

Principle of Thermal Imaging Section 8 All materials, which are above 0 degrees Kelvin (-273 degrees C), emit infrared energy. The infrared energy emitted from the measured object is converted into an electrical signal by the imaging

More information

Chapter 7 Energy and Energy Balances

Chapter 7 Energy and Energy Balances CBE14, Levicky Chapter 7 Energy and Energy Balances The concept of energy conservation as expressed by an energy balance equation is central to chemical engineering calculations. Similar to mass balances

More information

AZ State Standards. Concept 3: Conservation of Energy and Increase in Disorder Understand ways that energy is conserved, stored, and transferred.

AZ State Standards. Concept 3: Conservation of Energy and Increase in Disorder Understand ways that energy is conserved, stored, and transferred. Forms of Energy AZ State Standards Concept 3: Conservation of Energy and Increase in Disorder Understand ways that energy is conserved, stored, and transferred. PO 1. Describe the following ways in which

More information

ENERGY CONSERVATION The First Law of Thermodynamics and the Work/Kinetic-Energy Theorem

ENERGY CONSERVATION The First Law of Thermodynamics and the Work/Kinetic-Energy Theorem PH-211 A. La Rosa ENERGY CONSERVATION The irst Law of Thermodynamics and the Work/Kinetic-Energy Theorem ENERGY TRANSER of ENERGY Heat-transfer Q Macroscopic external Work W done on a system ENERGY CONSERVATION

More information

Differential Relations for Fluid Flow. Acceleration field of a fluid. The differential equation of mass conservation

Differential Relations for Fluid Flow. Acceleration field of a fluid. The differential equation of mass conservation Differential Relations for Fluid Flow In this approach, we apply our four basic conservation laws to an infinitesimally small control volume. The differential approach provides point by point details of

More information

CFD SIMULATION OF SDHW STORAGE TANK WITH AND WITHOUT HEATER

CFD SIMULATION OF SDHW STORAGE TANK WITH AND WITHOUT HEATER International Journal of Advancements in Research & Technology, Volume 1, Issue2, July-2012 1 CFD SIMULATION OF SDHW STORAGE TANK WITH AND WITHOUT HEATER ABSTRACT (1) Mr. Mainak Bhaumik M.E. (Thermal Engg.)

More information

Science Standard Articulated by Grade Level Strand 5: Physical Science

Science Standard Articulated by Grade Level Strand 5: Physical Science Concept 1: Properties of Objects and Materials Classify objects and materials by their observable properties. Kindergarten Grade 1 Grade 2 Grade 3 Grade 4 PO 1. Identify the following observable properties

More information

The Second Law of Thermodynamics

The Second Law of Thermodynamics The Second aw of Thermodynamics The second law of thermodynamics asserts that processes occur in a certain direction and that the energy has quality as well as quantity. The first law places no restriction

More information

Answer, Key Homework 6 David McIntyre 1

Answer, Key Homework 6 David McIntyre 1 Answer, Key Homework 6 David McIntyre 1 This print-out should have 0 questions, check that it is complete. Multiple-choice questions may continue on the next column or page: find all choices before making

More information

Lecture 3 Fluid Dynamics and Balance Equa6ons for Reac6ng Flows

Lecture 3 Fluid Dynamics and Balance Equa6ons for Reac6ng Flows Lecture 3 Fluid Dynamics and Balance Equa6ons for Reac6ng Flows 3.- 1 Basics: equations of continuum mechanics - balance equations for mass and momentum - balance equations for the energy and the chemical

More information

We will try to get familiar with a heat pump, and try to determine its performance coefficient under different circumstances.

We will try to get familiar with a heat pump, and try to determine its performance coefficient under different circumstances. C4. Heat Pump I. OBJECTIVE OF THE EXPERIMENT We will try to get familiar with a heat pump, and try to determine its performance coefficient under different circumstances. II. INTRODUCTION II.1. Thermodynamic

More information

1. Fluids Mechanics and Fluid Properties. 1.1 Objectives of this section. 1.2 Fluids

1. Fluids Mechanics and Fluid Properties. 1.1 Objectives of this section. 1.2 Fluids 1. Fluids Mechanics and Fluid Properties What is fluid mechanics? As its name suggests it is the branch of applied mechanics concerned with the statics and dynamics of fluids - both liquids and gases.

More information

Statistical Mechanics, Kinetic Theory Ideal Gas. 8.01t Nov 22, 2004

Statistical Mechanics, Kinetic Theory Ideal Gas. 8.01t Nov 22, 2004 Statistical Mechanics, Kinetic Theory Ideal Gas 8.01t Nov 22, 2004 Statistical Mechanics and Thermodynamics Thermodynamics Old & Fundamental Understanding of Heat (I.e. Steam) Engines Part of Physics Einstein

More information

PS-6.2 Explain the factors that determine potential and kinetic energy and the transformation of one to the other.

PS-6.2 Explain the factors that determine potential and kinetic energy and the transformation of one to the other. PS-6.1 Explain how the law of conservation of energy applies to the transformation of various forms of energy (including mechanical energy, electrical energy, chemical energy, light energy, sound energy,

More information

Chapter 17: Change of Phase

Chapter 17: Change of Phase Chapter 17: Change of Phase Conceptual Physics, 10e (Hewitt) 3) Evaporation is a cooling process and condensation is A) a warming process. B) a cooling process also. C) neither a warming nor cooling process.

More information

Study the following diagrams of the States of Matter. Label the names of the Changes of State between the different states.

Study the following diagrams of the States of Matter. Label the names of the Changes of State between the different states. Describe the strength of attractive forces between particles. Describe the amount of space between particles. Can the particles in this state be compressed? Do the particles in this state have a definite

More information

Phys222 W11 Quiz 1: Chapters 19-21 Keys. Name:

Phys222 W11 Quiz 1: Chapters 19-21 Keys. Name: Name:. In order for two objects to have the same temperature, they must a. be in thermal equilibrium.

More information

A drop forms when liquid is forced out of a small tube. The shape of the drop is determined by a balance of pressure, gravity, and surface tension

A drop forms when liquid is forced out of a small tube. The shape of the drop is determined by a balance of pressure, gravity, and surface tension A drop forms when liquid is forced out of a small tube. The shape of the drop is determined by a balance of pressure, gravity, and surface tension forces. 2 Objectives Have a working knowledge of the basic

More information

Natural Convection. Buoyancy force

Natural Convection. Buoyancy force Natural Convection In natural convection, the fluid motion occurs by natural means such as buoyancy. Since the fluid velocity associated with natural convection is relatively low, the heat transfer coefficient

More information

Compressible Fluids. Faith A. Morrison Associate Professor of Chemical Engineering Michigan Technological University November 4, 2004

Compressible Fluids. Faith A. Morrison Associate Professor of Chemical Engineering Michigan Technological University November 4, 2004 94 c 2004 Faith A. Morrison, all rights reserved. Compressible Fluids Faith A. Morrison Associate Professor of Chemical Engineering Michigan Technological University November 4, 2004 Chemical engineering

More information

Chemistry 13: States of Matter

Chemistry 13: States of Matter Chemistry 13: States of Matter Name: Period: Date: Chemistry Content Standard: Gases and Their Properties The kinetic molecular theory describes the motion of atoms and molecules and explains the properties

More information

State Newton's second law of motion for a particle, defining carefully each term used.

State Newton's second law of motion for a particle, defining carefully each term used. 5 Question 1. [Marks 20] An unmarked police car P is, travelling at the legal speed limit, v P, on a straight section of highway. At time t = 0, the police car is overtaken by a car C, which is speeding

More information

Engineering Problem Solving as Model Building

Engineering Problem Solving as Model Building Engineering Problem Solving as Model Building Part 1. How professors think about problem solving. Part 2. Mech2 and Brain-Full Crisis Part 1 How experts think about problem solving When we solve a problem

More information

1.4.6-1.4.8 Gas Laws. Heat and Temperature

1.4.6-1.4.8 Gas Laws. Heat and Temperature 1.4.6-1.4.8 Gas Laws Heat and Temperature Often the concepts of heat and temperature are thought to be the same, but they are not. Perhaps the reason the two are incorrectly thought to be the same is because

More information

4. Introduction to Heat & Mass Transfer

4. Introduction to Heat & Mass Transfer 4. Introduction to Heat & Mass Transfer This section will cover the following concepts: A rudimentary introduction to mass transfer. Mass transfer from a molecular point of view. Fundamental similarity

More information

Chapter 6 Work and Energy

Chapter 6 Work and Energy Chapter 6 WORK AND ENERGY PREVIEW Work is the scalar product of the force acting on an object and the displacement through which it acts. When work is done on or by a system, the energy of that system

More information

CHAPTER 7 THE SECOND LAW OF THERMODYNAMICS. Blank

CHAPTER 7 THE SECOND LAW OF THERMODYNAMICS. Blank CHAPTER 7 THE SECOND LAW OF THERMODYNAMICS Blank SONNTAG/BORGNAKKE STUDY PROBLEM 7-1 7.1 A car engine and its fuel consumption A car engine produces 136 hp on the output shaft with a thermal efficiency

More information

Every mathematician knows it is impossible to understand an elementary course in thermodynamics. ~V.I. Arnold

Every mathematician knows it is impossible to understand an elementary course in thermodynamics. ~V.I. Arnold Every mathematician knows it is impossible to understand an elementary course in thermodynamics. ~V.I. Arnold Radiation Radiation: Heat energy transmitted by electromagnetic waves Q t = εσat 4 emissivity

More information

Lecture 9, Thermal Notes, 3.054

Lecture 9, Thermal Notes, 3.054 Lecture 9, Thermal Notes, 3.054 Thermal Properties of Foams Closed cell foams widely used for thermal insulation Only materials with lower conductivity are aerogels (tend to be brittle and weak) and vacuum

More information

Practice Test. 4) The planet Earth loses heat mainly by A) conduction. B) convection. C) radiation. D) all of these Answer: C

Practice Test. 4) The planet Earth loses heat mainly by A) conduction. B) convection. C) radiation. D) all of these Answer: C Practice Test 1) Increase the pressure in a container of oxygen gas while keeping the temperature constant and you increase the A) molecular speed. B) molecular kinetic energy. C) Choice A and choice B

More information

Define the notations you are using properly. Present your arguments in details. Good luck!

Define the notations you are using properly. Present your arguments in details. Good luck! Umeå Universitet, Fysik Vitaly Bychkov Prov i fysik, Thermodynamics, 0-0-4, kl 9.00-5.00 jälpmedel: Students may use any book(s) including the textbook Thermal physics. Minor notes in the books are also

More information

CBE 6333, R. Levicky 1 Differential Balance Equations

CBE 6333, R. Levicky 1 Differential Balance Equations CBE 6333, R. Levicky 1 Differential Balance Equations We have previously derived integral balances for mass, momentum, and energy for a control volume. The control volume was assumed to be some large object,

More information

ES 106 Laboratory # 2 HEAT AND TEMPERATURE

ES 106 Laboratory # 2 HEAT AND TEMPERATURE ES 106 Laboratory # 2 HEAT AND TEMPERATURE Introduction Heat transfer is the movement of heat energy from one place to another. Heat energy can be transferred by three different mechanisms: convection,

More information

Force on Moving Charges in a Magnetic Field

Force on Moving Charges in a Magnetic Field [ Assignment View ] [ Eðlisfræði 2, vor 2007 27. Magnetic Field and Magnetic Forces Assignment is due at 2:00am on Wednesday, February 28, 2007 Credit for problems submitted late will decrease to 0% after

More information

APPLIED THERMODYNAMICS TUTORIAL 1 REVISION OF ISENTROPIC EFFICIENCY ADVANCED STEAM CYCLES

APPLIED THERMODYNAMICS TUTORIAL 1 REVISION OF ISENTROPIC EFFICIENCY ADVANCED STEAM CYCLES APPLIED THERMODYNAMICS TUTORIAL 1 REVISION OF ISENTROPIC EFFICIENCY ADVANCED STEAM CYCLES INTRODUCTION This tutorial is designed for students wishing to extend their knowledge of thermodynamics to a more

More information

XX. Introductory Physics, High School

XX. Introductory Physics, High School XX. Introductory Physics, High School High School Introductory Physics Test The spring 2013 high school Introductory Physics test was based on learning standards in the Physics content strand of the Massachusetts

More information

State Newton's second law of motion for a particle, defining carefully each term used.

State Newton's second law of motion for a particle, defining carefully each term used. 5 Question 1. [Marks 28] An unmarked police car P is, travelling at the legal speed limit, v P, on a straight section of highway. At time t = 0, the police car is overtaken by a car C, which is speeding

More information

Module P7.3 Internal energy, heat and energy transfer

Module P7.3 Internal energy, heat and energy transfer F L E X I B L E L E A R N I N G A P P R O A C H T O P H Y S I C S Module P7.3 Internal energy, heat and energy transfer 1 Opening items 1.1 Module introduction 1.2 Fast track questions 1.3 Ready to study?

More information

(1) The size of a gas particle is negligible as compared to the volume of the container in which the gas is placed.

(1) The size of a gas particle is negligible as compared to the volume of the container in which the gas is placed. Gas Laws and Kinetic Molecular Theory The Gas Laws are based on experiments, and they describe how a gas behaves under certain conditions. However, Gas Laws do not attempt to explain the behavior of gases.

More information

The First Law of Thermodynamics

The First Law of Thermodynamics Thermodynamics The First Law of Thermodynamics Thermodynamic Processes (isobaric, isochoric, isothermal, adiabatic) Reversible and Irreversible Processes Heat Engines Refrigerators and Heat Pumps The Carnot

More information

KINETIC MOLECULAR THEORY OF MATTER

KINETIC MOLECULAR THEORY OF MATTER KINETIC MOLECULAR THEORY OF MATTER The kinetic-molecular theory is based on the idea that particles of matter are always in motion. The theory can be used to explain the properties of solids, liquids,

More information

Acoustics: the study of sound waves

Acoustics: the study of sound waves Acoustics: the study of sound waves Sound is the phenomenon we experience when our ears are excited by vibrations in the gas that surrounds us. As an object vibrates, it sets the surrounding air in motion,

More information

Thermodynamics - Example Problems Problems and Solutions

Thermodynamics - Example Problems Problems and Solutions Thermodynamics - Example Problems Problems and Solutions 1 Examining a Power Plant Consider a power plant. At point 1 the working gas has a temperature of T = 25 C. The pressure is 1bar and the mass flow

More information

The Second Law of Thermodynamics

The Second Law of Thermodynamics Objectives MAE 320 - Chapter 6 The Second Law of Thermodynamics The content and the pictures are from the text book: Çengel, Y. A. and Boles, M. A., Thermodynamics: An Engineering Approach, McGraw-Hill,

More information

Chapter 6. Work and Energy

Chapter 6. Work and Energy Chapter 6 Work and Energy The concept of forces acting on a mass (one object) is intimately related to the concept of ENERGY production or storage. A mass accelerated to a non-zero speed carries energy

More information

What is Energy? What is the relationship between energy and work?

What is Energy? What is the relationship between energy and work? What is Energy? What is the relationship between energy and work? Compare kinetic and potential energy What are the different types of energy? What is energy? Energy is the ability to do work. Great, but

More information

Rate Equations and Detailed Balance

Rate Equations and Detailed Balance Rate Equations and Detailed Balance Initial question: Last time we mentioned astrophysical masers. Why can they exist spontaneously? Could there be astrophysical lasers, i.e., ones that emit in the optical?

More information

1 The basic equations of fluid dynamics

1 The basic equations of fluid dynamics 1 The basic equations of fluid dynamics The main task in fluid dynamics is to find the velocity field describing the flow in a given domain. To do this, one uses the basic equations of fluid flow, which

More information

Preview of Period 2: Forms of Energy

Preview of Period 2: Forms of Energy Preview of Period 2: Forms of Energy 2.1 Forms of Energy How are forms of energy defined? 2.2 Energy Conversions What happens when energy is converted from one form into another form? 2.3 Efficiency of

More information

- thus, the total number of atoms per second that absorb a photon is

- thus, the total number of atoms per second that absorb a photon is Stimulated Emission of Radiation - stimulated emission is referring to the emission of radiation (a photon) from one quantum system at its transition frequency induced by the presence of other photons

More information

Description of zero-buoyancy entraining plume model

Description of zero-buoyancy entraining plume model Influence of entrainment on the thermal stratification in simulations of radiative-convective equilibrium Supplementary information Martin S. Singh & Paul A. O Gorman S1 CRM simulations Here we give more

More information

KINETIC THEORY AND THERMODYNAMICS

KINETIC THEORY AND THERMODYNAMICS KINETIC THEORY AND THERMODYNAMICS 1. Basic ideas Kinetic theory based on experiments, which proved that a) matter contains particles and quite a lot of space between them b) these particles always move

More information

The rate of change of velocity with respect to time. The average rate of change of distance/displacement with respect to time.

The rate of change of velocity with respect to time. The average rate of change of distance/displacement with respect to time. H2 PHYSICS DEFINITIONS LIST Scalar Vector Term Displacement, s Speed Velocity, v Acceleration, a Average speed/velocity Instantaneous Velocity Newton s First Law Newton s Second Law Newton s Third Law

More information

CE 204 FLUID MECHANICS

CE 204 FLUID MECHANICS CE 204 FLUID MECHANICS Onur AKAY Assistant Professor Okan University Department of Civil Engineering Akfırat Campus 34959 Tuzla-Istanbul/TURKEY Phone: +90-216-677-1630 ext.1974 Fax: +90-216-677-1486 E-mail:

More information

Convection, Conduction & Radiation

Convection, Conduction & Radiation Convection, Conduction & Radiation There are three basic ways in which heat is transferred: convection, conduction and radiation. In gases and liquids, heat is usually transferred by convection, in which

More information

Greenhouse Glazing Effects on Heat Transfer for Winter Heating and Summer Cooling

Greenhouse Glazing Effects on Heat Transfer for Winter Heating and Summer Cooling Greenhouse Glazing Effects on Heat Transfer for Winter Heating and Summer Cooling David R. Mears, Ph.D. Bioresource Engineering Department of Plant Biology and Pathology Rutgers University 20 Ag Extension

More information

Calculating Heat Loss by Mark Crombie, Chromalox

Calculating Heat Loss by Mark Crombie, Chromalox Calculating Heat Loss by Mark Crombie, Chromalox Posted: January 30, 2006 This article deals with the basic principles of heat transfer and the calculations used for pipes and vessels. By understanding

More information

THERMAL RADIATION (THERM)

THERMAL RADIATION (THERM) UNIVERSITY OF SURREY DEPARTMENT OF PHYSICS Level 2 Classical Laboratory Experiment THERMAL RADIATION (THERM) Objectives In this experiment you will explore the basic characteristics of thermal radiation,

More information

CHAPTER 2 Energy and Earth

CHAPTER 2 Energy and Earth CHAPTER 2 Energy and Earth This chapter is concerned with the nature of energy and how it interacts with Earth. At this stage we are looking at energy in an abstract form though relate it to how it affect

More information

Boardworks AS Physics

Boardworks AS Physics Boardworks AS Physics Vectors 24 slides 11 Flash activities Prefixes, scalars and vectors Guide to the SI unit prefixes of orders of magnitude Matching powers of ten to their SI unit prefixes Guide to

More information

18 Q0 a speed of 45.0 m/s away from a moving car. If the car is 8 Q0 moving towards the ambulance with a speed of 15.0 m/s, what Q0 frequency does a

18 Q0 a speed of 45.0 m/s away from a moving car. If the car is 8 Q0 moving towards the ambulance with a speed of 15.0 m/s, what Q0 frequency does a First Major T-042 1 A transverse sinusoidal wave is traveling on a string with a 17 speed of 300 m/s. If the wave has a frequency of 100 Hz, what 9 is the phase difference between two particles on the

More information

SAM Teachers Guide Heat and Temperature

SAM Teachers Guide Heat and Temperature SAM Teachers Guide Heat and Temperature Overview Students learn that temperature measures average kinetic energy, and heat is the transfer of energy from hot systems to cold systems. They consider what

More information

Problem Set 4 Solutions

Problem Set 4 Solutions Chemistry 360 Dr Jean M Standard Problem Set 4 Solutions 1 Two moles of an ideal gas are compressed isothermally and reversibly at 98 K from 1 atm to 00 atm Calculate q, w, ΔU, and ΔH For an isothermal

More information

Chapter 8 Maxwell relations and measurable properties

Chapter 8 Maxwell relations and measurable properties Chapter 8 Maxwell relations and measurable properties 8.1 Maxwell relations Other thermodynamic potentials emerging from Legendre transforms allow us to switch independent variables and give rise to alternate

More information

Chapter 6 Thermodynamics: The First Law

Chapter 6 Thermodynamics: The First Law Key Concepts 6.1 Systems Chapter 6 Thermodynamics: The First Law Systems, States, and Energy (Sections 6.1 6.8) thermodynamics, statistical thermodynamics, system, surroundings, open system, closed system,

More information

Mechanics 1: Conservation of Energy and Momentum

Mechanics 1: Conservation of Energy and Momentum Mechanics : Conservation of Energy and Momentum If a certain quantity associated with a system does not change in time. We say that it is conserved, and the system possesses a conservation law. Conservation

More information

PHOTOELECTRIC EFFECT AND DUAL NATURE OF MATTER AND RADIATIONS

PHOTOELECTRIC EFFECT AND DUAL NATURE OF MATTER AND RADIATIONS PHOTOELECTRIC EFFECT AND DUAL NATURE OF MATTER AND RADIATIONS 1. Photons 2. Photoelectric Effect 3. Experimental Set-up to study Photoelectric Effect 4. Effect of Intensity, Frequency, Potential on P.E.

More information

Physics Notes Class 11 CHAPTER 6 WORK, ENERGY AND POWER

Physics Notes Class 11 CHAPTER 6 WORK, ENERGY AND POWER 1 P a g e Work Physics Notes Class 11 CHAPTER 6 WORK, ENERGY AND POWER When a force acts on an object and the object actually moves in the direction of force, then the work is said to be done by the force.

More information

CHEM 120 Online Chapter 7

CHEM 120 Online Chapter 7 CHEM 120 Online Chapter 7 Date: 1. Which of the following statements is not a part of kinetic molecular theory? A) Matter is composed of particles that are in constant motion. B) Particle velocity increases

More information

Chapter 4: Transfer of Thermal Energy

Chapter 4: Transfer of Thermal Energy Chapter 4: Transfer of Thermal Energy Goals of Period 4 Section 4.1: To define temperature and thermal energy Section 4.2: To discuss three methods of thermal energy transfer. Section 4.3: To describe

More information

1 CHAPTER 7 THE FIRST AND SECOND LAWS OF THERMODYNAMICS

1 CHAPTER 7 THE FIRST AND SECOND LAWS OF THERMODYNAMICS 1 CHAPER 7 HE FIRS AND SECOND LAWS OF HERMODYNAMICS 7.1 he First Law of hermodynamics, and Internal Energy he First Law of thermodynamics is: he increase of the internal energy of a system is equal to

More information

Unit 3: States of Matter Practice Exam

Unit 3: States of Matter Practice Exam Page 1 Unit 3: States of Matter Practice Exam Multiple Choice. Identify the choice that best completes the statement or answers the question. 1. Two gases with unequal masses are injected into opposite

More information

Chapter 6 The first law and reversibility

Chapter 6 The first law and reversibility Chapter 6 The first law and reversibility 6.1 The first law for processes in closed systems We have discussed the properties of equilibrium states and the relationship between the thermodynamic parameters

More information