Be Light Years Ahead. Adhesives, Sealants and Surface Treatment Solutions for the Lighting Industry

Transcription

1 Be Light Years Ahead Adhesives, Sealants and Surface Treatment Solutions for the Lighting Industry

2 Be Light Years Ahead Be Light Years Ahead Adhesives, Sealants and Surface Treatment Solutions for the Lighting Industry New technologies, rising end customer expectations and increasing regulatory means manufacturers of luminaires and lamps need to set ambitious goals: Differentiate your luminaire through exciting design and materials! Increase the life span and quality of your products! Reduce manufacturing costs and improve the environmental impact of your lighting devices! Find out why Henkel is the ideal partner to meet your objectives: Take advantage of our global capabilities combined with local technical support Make use of to the broadest technology portfolio for adhesives, sealants and surface treatment Get access to the latest innovations and sustainable solutions Use dispensing and process equipment to optimise your application For more information please visit Street and Car Park Lighting

3 Be Light Years Ahead Industrial and Commercial Lighting 0- Consumer and Residential Lighting - Architectural Lighting 4-5 Advertisement and Logo Lighting

4 4 Be Light Years Ahead Lighting Solutions from Henkel Bonding and Sealing Realise your desired design through virtually invisble joining of components and adhesives for all types of material combinations, including plastics. Increase luminaire quality and life span: - Good water resistance - Ingress protection - Reliable adhesion - Cope with vibrations Optimise manufacturing process: - Manage gaps and thermal expansion - Optimise line speed through fast cure and automation Potting General and Transparent Increase luminaire quality and life span by protecting electronic components from humidity and impact Protect LED modules through ultra-clear transparent potting: - Increase lumen output - Long term UV stable and low yellowing - Reduce need for sealed diffusers and additional manufacturing steps Flexible cure time to match your manufacturing process and low shrinkage Thermal Management Increase life span of LED modules by reducing operating temperature Removable solutions to allow maintenance Thermally conductive adhesives to combine fixing and thermal management in one manufacturing step

5 Be Light Years Ahead 5 Surface Treatment Next generation surface treatment for aluminum and steel with improved cost and environmental profile Improve corrosion protection on e.g. lamp housings for exterior lighting Support your cost and sustainability goals: - Less process steps - Low temperatures - No sludge with heavy metals 4 Low Pressure Moulding General and Transparent Increase luminaire quality and life span: protecting electronic components from humidity and impact Optimise your manufacturing process: overmoulded parts are ready for the next process step in less than minute no curing time required Directly overmould PCBs and in many cases elimate need for additional housing for components Improve your sustainability footprint: low pressure moulding adhesives are made of renewable raw materials 5 Dispensing Equipment For some jobs it is sufficient to dispense product directly from the bottle or tube onto the surfaces to be joined. In other cases, however, more precise and automated dispensing is required. In addition to the standard equipment available, Henkel can design and build equipment based upon customers requirements to provide unique application solutions.

6 6 Be Light Years Ahead Street and Car Park Lighting Lamp housings are used for exterior street lighting and car parks and must withstand exposure to the elements, hot/cold temperature extremes, dust, dirt, and road vibration. Using Henkel e.g. bonding and sealing, potting, and surface treatment solutions in lamp housing design and manufacturing, ensures long life and trouble-free operation. 5 4

7 Be Light Years Ahead 7 Bonding and Sealing Improved reliability by protecting against the elements and road vibration More design freedom by managing thermal expansion of different materials Optimised costs in manufacturing by reducing manufacturing steps Surface Treatment Corrosion protection and improved protection for external elements Improved paint adhesion Fast and low waste process 4 Potting General and Transparent Protect LED modules directly by ultra clear and UV stable potting Fitting to your process: potting with flexible cure times Optimised dispense solutions and automation Low Pressure Moulding General and Transparent Protect sensitive electrical components against water and dust ingress Fast process time by instant curing Based on sustainable raw materials 5 Thermal Management Increase LED life span by lowering operating temperature Easy maintenance though removable thermal management solutions Optimised manufacturing by combining bonding and thermal management Did You Know? The average life of an LED can be as long as 50,000 hours. Compare this to the,000-hour life of an incandescent bulb and the 8,000-hour life for compact fluorescents (CFLs).

8 8 Be Light Years Ahead Industrial and Commercial Lighting Industrial and commercial lighting includes factories, office buildings, shopping malls, and retail stores. Facilities like these require component reliability, easy maintenance, and sustainable solutions to help reduce operating expenses and maintenance costs. Henkel bonding, lens sealing, surface treatment, thermal management and potting solutions can help. 5 4

9 Be Light Years Ahead 9 Bonding and Sealing Improved reliability by sealing housing against dust and liquids Optimised costs in manufacturing by reducing manufacturing steps Surface Treatment Corrosion protection Improved paint adhesion Fast and low waste process 4 Potting General and Transparent Protect LED modules directly by ultra clear and UV stable potting Fitting your process: potting with flexible cure times Optimised dispense solutions and automation Low Pressure Moulding General and Transparent Protect sensitive electrical components against water and dust ingress Fast process time by instant curing Based on sustainable raw materials 5 Thermal Management Increase LED life span by lowering operating temperature Easy maintenance though removable thermal management solutions Optimised manufacturing by combining bonding and thermal management Did You Know? LEDs project light forward, while most other light sources emit light in all directions. This makes LEDs optimal for spotlights and floodlights.

10 0 Be Light Years Ahead Consumer and Residential Lighting New and exciting designs are becoming even more important to differentiate your luminarie in the consumer and residential market. The use of LEDs for residential and consumer lighting is growing as incandescent become obsolete and concerns remain over the safety and disposal risk of CFLs. Henkel bonding, thermal management, and potting products can help manufacturers realise their design ambitions and build a better, more reliable and potentially lower-cost luminaire.

11 Be Light Years Ahead Bonding and Sealing More design freedom by transparent bonding & joining different types of substrates Optimise costs in manufacturing by reducing manufacturing steps Potting General and Transparent Protect LED modules directly by ultra clear and UV stable potting Fitting to your process: potting with flexible cure times Optimised dispense solutions and automation Thermal Management Increase LED life span by lowering operating temperature Easy maintenance though removable thermal management solutions Optimised manufacturing by combining bonding and thermal management Did You Know? LEDs can be switched on and off instantly and give off full strength immediately, unlike CFLs.

12 Be Light Years Ahead Architectural Lighting Safety is paramount when it comes to swimming pool, deck and outdoor lighting. Henkel e.g. surface treatment, potting, and low pressure moulding solutions can help achieve a safe, reliable, watertight enclosure to ensure the integrity of underwater and weather-exposed lighting components. 5 4

13 Be Light Years Ahead Bonding and Sealing Improved reliability by sealing housings against the elements Optimise costs by reducing the number of manufacturing steps Surface Treatment Corrosion protection and improved protection for external elements Improved paint adhesion Fast and low waste process 4 Potting General and Transparent Protect LED modules directly by ultra clear and UV stable potting Fitting to your process: potting with flexible cure times Optimised dispense solutions and automation Low Pressure Moulding General and Transparent Protect sensitive electrical components against water and dust ingress Fast process time by instant curing Based on sustainable raw materials 5 Thermal Management Increase LED life span by lowering operating temperature Easy maintenance though removable thermal management solutions Optimised manufacturing by combining bonding and thermal management Did You Know? LED stands for light-emitting diode.

14 4 Be Light Years Ahead Advertisement and Logo Lighting Illuminated advertisement and logos are an important element of the visual identity of your business. When used outside, they must withstand exposure to these elements while maintaining the high quality appearance of your design. In addition, the requirements of corporate design rules must be met, as for example displaying correct company colour tones. 5

15 Be Light Years Ahead 5 Bonding and Sealing More design freedom by transparent bonding Improved reliability by protection against water ingress Optimised costs by reducing the number of manufacturing steps Low Pressure Moulding General and Transparent 5 Protect sensitive electrical components against water and dust ingress Fast process time by instant curing Based on sustainable raw materials Potting General and Transparent Protect LED modules directly by ultra clear and UV stable potting Fitting to your process: potting with flexible cure times Optimised dispension solutions and automation Thermal Management Increase LED life span by lowering operating temperature Easy maintenance though removable thermal management solutions Optimised manufacturing by combining bonding and thermal management Did You Know? The standard unit of measurement that defines the output or brightness of an LED is called a lumen. The more lumens an LED has, the brighter the light.

16 6 Be Light Years Ahead Dispensing Equipment For some jobs it is sufficient to dispense product directly from the bottle or tube onto the surfaces to be joined. In other cases, however, more precise and automated dispensing is required. In addition to the standard equipment available, Henkel can design and build equipment based upon customers requirements to provide unique application solutions. Hand-Held Applicators Hand-Held Applicators are ergonomically designed for hand delivery of adhesives and fluids directly from their original package. Whether pneumatic or manual, each item is designed for easy, clean, hand-held dispensing of fluids, to reduce waste and operator contact. The selection of a Hand- Held Applicator is based on the product type, package size, and process requirements. Available for: Component Cartridges Component Cartridges Light Curing Equipment Four major effects must be taken into consideration when designing a successful light cure application: emission spectrum of the cure system, light intensity, transmission properties of substrate and required cure characteristics. As a manufacturer of both the chemistry and the curing equipment, Henkel knows how to match light cure adhesives to the correct dispensing and curing system. Flood Cure Systems Spot Cure Systems Meters & Accessories

17 Be Light Years Ahead 7 Semi-Automated Dispensing Systems These systems are designed for integration into automated assembly lines and can be externally triggered by a PLC or robot control. They are suitable for dispensing microdots, dots, drops or beads of low to high viscosity products. Each system is equipped with Controller 975, Reservoir 9708 accommodating up to ltr bottles and Footswitch 970 for combination with the appropriate valve*. Hand-Held Dispensing Systems 4 These systems are designed for single user manual workstations suitable for dispensing dots, drops or beads of low to medium viscosity products. The systems comprise an Integrated Controller & Reservoir and Footswitch 970 for combination with the appropriate valve*. Customised Solutions Henkel offers a wide range of stand alone dispensing equipment and turnkey packages for all adhesive and sealant dispensing needs. Systems range from bulk sealant dispensing pumps to custom built UV cure systems to fully integrated robot and special machine systems. Henkel engineers can support you with recommendations and specification for custom built equipment. 5 * The valve is selected to suit the viscosity of the product and the amount to be dispensed.

18 8 Be Light Years Ahead Henkel Adhesives Satisfy Stringent Criteria for Use with Cree LEDs Volatile organic compounds (VOCs) may be found in various chemical products such as cleaners, lubricants, solvents, thermal compounds as well as adhesives and sealants. When enclosed together with LEDs during luminaire assembly, incompatible VOCs may degrade the light output performance, change the colour points and reduce the life span of LEDs. Incompatibility comes in varying degrees: some chemical materials are critical when in direct contact with LEDs but are fine when enclosed without being in contact with the LED (indirect contact - also referred to as proximity). Some materials, such as adhesives and sealants, may be critical during the curing process, but less so when fully cured. Cree has defined a testing methodology to evaluate chemical compatibility. Many Henkel products meet the requirements set forth by Cree and we are committed to continue systematically testing our products. This will help you select the right adhesive and sealant for your application and be assured that incompatibility will not become an issue for you. Chemical Compatibility to LEDs VOC Entry and Failure Mechanism Silicone Lens. LEDs are typically protected by an ultra clear silicone lens LED Chip VOC. When enclosed during luminaire assembly, some volatile organic compounds (VOCs) may diffuse into silicone lens Enclosure, e.g. luminaire housing. Heat and photon energy discolor VOCs and reduce lumen output or may cause failure of LED

19 Be Light Years Ahead 9 Performance testing Comparison of Henkel LED Compatible Products on Cree Test Boards Photo : LEDs utilising Henkel compatible products Photo : LEDs without Henkel compatible products Did You Know? In some cases discoloration of LEDs by incompatible VOCs may be reversible when the enclosure around the LED is removed.

20 Product Selector for the Lighting Industry Including results according to Cree XLamp Chemical Compatibility test method Bonding and Sealing Clear Bonding Clear Bonding & Sealing Instant handling Fast UV cure Ultra clear Flexible Toughened Low blooming Gap filling Glass / metal / plastics Plastics / coated metals Toughened Good adhesion on plastics EA 948 Teroson SI Technical Data K Instant Adhesive K Instant Adhesive K Instant Adhesive K Acrylic K Acrylic K Epoxy K Alkoxy Silicone Pot Life / Skin Formation Time Indefinite Indefinite 5-60 min min Tensile Strength 0 N/mm² 0 N/mm² 8 N/mm² 4 N/mm² 9 N/mm² 47 N/mm².5 N/mm² Final Cure Time Few hours Few hours Few hours Few minutes Few minutes 4 h Polyolefin Bonding Translucent Bonding & Sealing Black, white, grey Bonding & Sealing White Bonding & Sealing 70 min handling strength Fast UV cure K moisture cure Fast Fast AA 08 SI 5088 Teroson MS 99 Teroson MS 999 SI 566 Technical Data K Acrylic K Alkoxy Silicone K Silane Modified Polymer K Silane Modified Polymer K Alkoxy Silicone Pot Life / Skin Formation Time 4 min min 0 min 0-0 min 5 min Tensile Strength N/mm² N/mm² N/mm² N/mm² N/mm² Final Cure Time Few days 7 h week week Few days Potting Potting Transparent Potting Up to 80 C Up to 80 C Up to 0 C Up to 50 C Flexible cure time Fast cure Heat cure 95 % light transmission* CR 67 / CR 400 SI 56 Stycast EE 800 / EB 6 SI 5700 Technical Data K Polyurethane K Alkoxy Silicone K Epoxy K Polyaddition Silicone Viscosity.6 Pa s -0 Pa s Pa s 6-7 Pa s Pot Life -90 min 6 min 8 hrs 5 min Shore Hardness A A 50 D 68 A 9 * at mm thickness / 550 nm

21 Thermal Management Removable Grease Adhesive Permanent Potting.4 W/mK 0.8 W/mK.4 W/mK.7 W/mK Fast fixture High strength Self levelling SI 00 AA 5 EA 9497 EA 9496 Technical Data Silicone Grease K Acrylic K Epoxy K Epoxy Tensile Strength 5. N/mm² 5 N/mm² 67 N/mm² Dielectric Strength 7 kv/mm 8 kv/mm Final Cure Time no cure day -7 days day 4 Surface Treatment Indoor use e.g. neutral salt spray test 500 h Pre-Treatment for painted parts Steel / zinc / aluminum External use e.g. neutral/acidic salt spray test 000 h -4 steps 5 steps More than 5 steps Bonderite M-NT CC Range Bonderite M-NT Bonderite M-NT Range Bonderite M-ZN Range Bonderite M-ED Range With the Bonderite M-NT, M-ZN and M-ED ranges, Henkel offers new generation surface treatment solutions for steel, zinc and aluminum surfaces as well as advanced equipment for dosing and control. Our specialists will advise you on the right solution for you. 5 Low Pressure Moulding White Mould around electronics and LEDs with few seconds cure time Black Grey Technomelt PA 668 Technomelt PA 678 Technomelt PA 65 Technical Data Polyamide Hotmelt Shore Hardness A 90 A 90 A 9 Yield Strength 5.5 N/mm² 5. N/mm² 5 N/mm² Softening Point 55 C 87 C 70 C Henkel is continuously testing adhesives to LED compatibility. For products not listed as compatible, please inquire with our sales specialists in case you wish to use them in direct contact or in proximity to LEDs. Approved for direct LED contact according to Cree XLamp Chemical Compatibility test method. Approved for use in proximity of LEDs according to Cree XLamp Chemical Compatibility test method. Issue

22 Henkel Ltd Wood Lane End, Hemel Hempstead Hertfordshire, HP 4RQ Tel.: +44 (0) Fax: +44 (0) The data contained herein are intended as reference only. Please contact Henkel Technical Support Group for assistance and recommendation on specifications for these products. designates a trademark of Henkel AG & Co. KGaA or its affiliates, registered in Germany and elsewhere Henkel AG & Co. KGaA, 0